01 Contents. Introduction Products

Size: px

Start display at page:

Download "01 Contents. Introduction Products"

Bernadette Holmes
6 years ago
Views:

2 Company profile.

3 Introduction Products - Low Voltage Switch Boards - Distribution Boards - Motor Control Center (MCC) - Automatic Transfer Switches ( ATS Panels) - Capacitor Banks - Synchronizing Panels - Control Panels - Cable Tray & Accessories Organization Chart Machinery Suppliers Location Contents

4 02 Introduction Masar Delta Introduction About Masar Delta; Introduction Masar Delta is a company manufacturing electric panel board in Saudi Arabia. With our high experienced technical team, the distinctive location, more than 5000 m2 of working space, and the best machinery/methodology in this industry, Our aim is to exceed the expectations. Quality Policy In its quest to be a major player in the electric products manufacturing industry, Masar Delta pursues continual improvement in the quality of its products, services and performance, leading to total customer satisfaction and business growth through dedication, commitment, direct communication and team work of all employees. Our Vision To be our customer s route to power by providing the highest quality products with the optimum balance between the shortest delivery periods and competitive pricing.

5 03 Products 02 Prodcuts

05 Products 1. Low Voltage Switch Boards 1.

enclosure) and up to 6300 AMPS with short circuit withstand capacity up to 100 ka (for type

They are generally installed downstream the MV/LV transformers or generator groups for electrical

6 05 Products 1. Low Voltage Switch Boards 1.1 Description: Custom Built Low Voltage Switchboards are available up to 6300 AMPS (for local enclosure) and up to 6300 AMPS with short circuit withstand capacity up to 100 ka (for type tested enclosure). They are generally installed downstream the MV/LV transformers or generator groups for electrical powers distribution and control. Typical loads are motors, heating equipment s, lighting and air-conditioning units. The boards are designed for safety and reliability to meet customer requirements with top national/international standards.

1.2 Enclosure: 1.2.1 Features: Type Tested of up to 6300 AMPS in accordance to IEC 61439-1.

accordance to IEC 61439-1 Utilizing electro-galvanized steel sheets (2.

Coated in Polyester powder coating in RAL 7035 (other paint shades are

7 1.2 Enclosure: Features: Type Tested of up to 6300 AMPS in accordance to IEC Forms of Internal Separation from Form-1 to Form 4 and Nema 4X in accordance to IEC Utilizing electro-galvanized steel sheets (2.0 mm to 3.0 mm thick for frames and 1.6 mm to 2.0 mm thick for covers). Coated in Polyester powder coating in RAL 7035 (other paint shades are available upon request). Stainless steel enclosure are also available upon request.

1.2.2 Dimensions: Various combinations of the following dimensions are possible: Height: 1600, 1800, 2150 and 2300mm Width: 600, 800, 1000 and 1200mm Depth: 450, 600, 800 and 1000mm Additional

9 1.2.2 Dimensions: Various combinations of the following dimensions are possible: Height: 1600, 1800, 2150 and 2300mm Width: 600, 800, 1000 and 1200mm Depth: 450, 600, 800 and 1000mm Additional dimensions are available based upon Customer/Design requirements. 1.3 Bus bars: Made of tin plated (ETP) grade copper (Silver plating available upon request). PVC Sleeve is available upon request. Ratings are designed with current density of 1.5 A/mm². Rated Insulation Voltage is 690V (with 1000V available as an option) Main bus bars rated from 630A to 6300A. Main Bus bar short circuit withstand capacity of up to 100kA for 1 Sec. Neutral and Earth Bus bars are rated at 50% of the main Bus bar (100 % available upon request).

AMPS. Are used in commercial residential as well as industrial buildings to distribute power from

Enclosures with type tested of up to 250 AMPS in accordance to IEC 61439-1&3 are available.

10 09 Products 2. Distribution Boards Custom Built Distribution Boards are available for intensities of up to 250 AMPS. Are used in commercial residential as well as industrial buildings to distribute power from Main Panels to the downstream loads. Enclosures with type tested of up to 250 AMPS in accordance to IEC &3 are available. Built of electro-galvanized steel sheets and coated in Polyester powder coating in RAL. Enclosure is accessible from front with cable entry from top and bottom with removable gland plates. Neutral and Earth Bus bars are rated at 50% of the main Bus bar.

13 Products 3. Motor Control Center (MCC) 3.

conveniently grouped to control equipment like motors and chillers.

14 13 Products 3. Motor Control Center (MCC) 3.1 Description: The MCC panel consists of compartmental modules conveniently grouped to control equipment like motors and chillers. It is a combination of motor starters, power feeders and interlocking relays in a modular enclosure. All types of starters can be accommodated within the MCCs. Direct On-Line, Star/Delta, Auto Transformer, Soft Starter, and Variable Speed Drive.

3.2 Construction: Type tested assembly in accordance to IEC 60439-1&2.

15 3.2 Construction: Type tested assembly in accordance to IEC &2. Built of electro galvanized sheet steel with Polyester powder coated in RAL 7035, Removable modules and their chassis are made of Alum-Zinc sheet steel. Fully compartmentalized design conforming to form of separation of Form-4 Draw-out and Fixed Type modules: Draw-out module up to 225A Fixed-Type above 225A Draw-out modules of the same size are interchangeable, aiming to reduce the maintenance time. All module covers are an integral part of the modules and come with positive interlocks, which completely avoids accidental withdrawal of the modules during operation. 3.3 Bus Bar: Bus bars designed for current density of 1.5A/mm². Main Bus bars are rated for intensities of up to 6300A. Rated Insulation Voltage is 690V (with 1000V available as an option). Made of tin plated (ETP) grade copper (Silver plating available upon request). PVC Sleeves are available upon request. Main Bus bar short circuit withstand capacity of up to 100kA for 1 Sec. Neutral and Earth Bus bars are rated at 50% of the main Bus bars (100 % available upon request).

16 15 Products 4. Automatic Transfer Switches (ATS Panels) 4.1 Description: Automatic Transfer Switches (ATS Panels) provide a solution to handle transfer of critical loads to emergency sources. They ensure the continuity of electric supply to an installation with minimum interruption by making an automatic changeover from normal supply to emergency supply. Available in two types: Digital controller and conventional components.

4.2 Construction: Built of electro-galvanized steel sheets (2.0 mm to 3.0 mm thick for frames and 1.6 mm to 2.0 mm thick for covers).

d Enclosure is accessible from front and rear with cable entry from top and bottom with removable gland plates.

PVC Sleeves are available upon request. Ratings are designed with current density of 1.5 A/mm². Rated Insulation Voltage is 690V.

17 4.2 Construction: Built of electro-galvanized steel sheets (2.0 mm to 3.0 mm thick for frames and 1.6 mm to 2.0 mm thick for covers). Coated in Polyester powder coating in RAL 7035.d Enclosure is accessible from front and rear with cable entry from top and bottom with removable gland plates. Degree of protection of up to IP Bus bars: Made of tin plated (ETP) grade copper (Silver plating available upon request). PVC Sleeves are available upon request. Ratings are designed with current density of 1.5 A/mm². Rated Insulation Voltage is 690V. Main Bus bars rating of up to 6300A. Main Bus Bar short circuit withstand capacity of up to 100kA for 1 Sec. Neutral and Earth Bus bars are rated at 50% of the main Bus bar. N.B. Options for Multiple incomers and Bus couplers or with bypass are available.

18 17 Products 5. Capacitor Banks Power Factor Correction Panels 5.1 Description: Capacitor Banks improve the power factor to boost efficiency and save energy. It is installed in power systems to which mostly inductive loads are connected like those in Steel industries and Automotive plants...etc. 5.2 Construction: Built of electro-galvanized steel sheets (2.0 mm thick for frames and 1.6 mm thick for covers). Coated in Polyester powder coating in RAL 7035 Capacitor Tray is made of 2mm thick Alum-Zinc Sheet Steel. Enclosure is accessible from front with cable entry from top and bottom with removable gland plates. Capacitor panel is in modular construction, each step is mounted in withdrawable module completely accessible from the front. It is of Rated Insulation Voltage of 690V Enclosure Degree of protection of up to IP-55

19 18 Products 6. Synchronizing Panels Totalization Panels 6.1 Description: Synchronizing Panels are used in industrial and commercial applications to supply large amounts of loads from paralleling engine generator sets as per load sharing capacity. 6.2 Construction: Made of electro-galvanized steel sheets (2.0 mm to 3.0 mm thick for frames and 1.6 mm to 2.0 mm thick for covers). 6.3 Bus bars: Made of tin plated (ETP) grade copper (Silver plating available upon request). PVC Sleeve is available upon request. Ratings are designed with current density of 1.5 A/mm². Rated Insulation Voltage is 690V. Main Bus bars rated up to 10,000A. Main Bus bar short circuit withstand capacity up to 100kA for 1 Sec. Neutral and Earth Bus bars are rated at 50% of the main Bus bar (100 % available upon request). Coated in Polyester powder coating in RAL Enclosure is accessible from front and rear with cable entry from top and bottom with removable gland plates. Degree of Protection up to IP-55

20 19 Products 7. Control Panels A. Control Panels: Control Panel is a custom-made assembly of conveniently grouped control equipment primarily used for controlling and supervising a motor load. Control panels are typically designed for operating and controlling motors. Application The most demanding applications are: Local Control Panel Enclosed Starter Mimic & Indicating Panel Control Desk Operator Panel Can be interfaced with the Building Management System (BMS) B. Automation Panels Automation Panel is a custom-made assembly which is designed to provide automatic control solutions for specific applications. Application has developed a practical and economical solution in the field of PLC and computer controlled systems for automatic control projects by providing: Solution for any automatic sequence requested Optimum Control Design with control diagram Translation into hardware using Conventional Logic Controller Component and Programmable Logic Control (PLC) Solutions to inveterate problems in an existing automation System by introducing optimum and satisfactory modifications Reviewing of control systems design and solutions in many fields

Supervisory Control and Data Acquisition

21 Programmable Logic Control (PLC): PlC - For small to.medium-range applications - Flexible system (CPU Family) - Expandable I/O system Large Variety of I/O modules: - Digital - Analog - TC/PT100 - Motion Supervisory Control and Data Acquisition (SCADA) and Human Machine Interface (HMI): Complete range of graphic touch panel

22 21 Products 8. Cable Tray & Accessories

24 23 Oraganization 03 Organization Chart

25 C.E.O Executive Secretary Executive Factory Manager Secretary Marketing & Pre-qualification Manager Sales Manager Technical Manager Production & Maintenance Manager Ac- Administration Manager Marketing Engineer Central Area Sales Engineers Sr. Proposal Engineer Design Manager Q.C/Q.A Manager Supply Chain Manager Fabrication Charge hand Mechanical Charge Hand Electrical Charge Hand Admin Coordinator Pre-Qualification Engineer Western Area Sales Engineers Proposal Engineers Sr. Electrical Engineers Q.C Engineer Purchase & Logistics Specialist Metal Sheet Machine Operators Assembly Technicians Wiremen HR Specialist Eastern Area Sales Engineers Sr. Mechanical Engineer Q.C Technicians Warehouse Manager Bus Bar Technicians Security Guards Draftsmen CNC Programmer Maintenance Engineer Drivers

26 27 Machinery Masar Delta 04 Machinery / Equipment

27 Section Machine Description Model Manufacturer Country of origin Sheet Metal Section Bus Bar Section Finishing & Q.C CNC TURRET PUNCH PRESS P-1225 TK LVD Belgium CNC Press Brake (5- axis) HPS165/30 YSD Belgium NC Hydraulic Guillotine Shear HGAK 31/6 YSD Belgium HYDRAULIC PUNCH DRIVER TMHELE05/1 Terramar Germany Multi Process Welding Machine XMT 425 CC/CV Miller U.S.A 3 in 1 Bus Bar Fabricating Machine SLB 125 Novopress Germany Hydraulic Bus Bar Punching/Cutting HBC-CP 160 Payapress Turkey Hydraulic Bus Bar Bending HBC-BE 160 Payapress Turkey 45 DEBURRING MACHINE TMH-KE1 Terramar Germany Laser Label Engraving Machine Rayjet 8015 speedy Trotec U.S.A Ferrule printer THERMOMARK W1 Phoenix Germany L.V Dielectric tester (0-5 KV AC/DC) MIT525 Megger U.S.A Megger Tester MIT515 Megger U.S.A (Megohmmeter VDC) Multi-meter AC/DC True RMS 87-V Fluke U.S.A Digital Clamp Meter AC current 376 Fluke U.S.A (0-1000A)/DC Volt (0-600 V) Motor/Phase Rotation Indicator 9062 Fluke U.S.A Portable Test Bench for electric board. SCQ-TR-07 All-Energy Systems Italy

30 31 Suppliers Masar Delta 05 Suppliers

32 33 Location Masar Delta 06 Location

33 Location Masar Delta N E New Kharj Road Exit 14 Obeikan City New Industrial City Masar Delta Factory

LOW VOLTAGE SOLUTIONS

LOW VOLTAGE SOLUTIONS ISO 900:008 Certificate No: 34039 Contents A - Introduction alfanar electric Page 4 alfanar Low Voltage Factory Page 5 Key information about LV Factory Page 6 B - Product Range MF