45V MODULE ENDURANCE HIGH POWER 45V LIC MODULE. Powered by

Transcription

1 45V MODULE ENDURANCE HIGH POWER 45V LIC MODULE Powered by

2 Safe - Light - Compact - Scalable A perfect fit for low duty cycle applications Stabilization of electric power Peak power absorption Power quality improvement UPS/Voltage sag compensation

3 45V MODULE Why choose Endurance? 500 W/kg Power density 3000 W/kg Endurance module can be used at high currents providing high power levels within a small and light package, making the installation and handling process much easier. Eas Endurance Standard lead-acid accumulators Endurance module can be recharged very rapidly after a discharge, keeping the down time of your back-up system as short as possible. No specifi c charge profi le is required. C/2 Recharge rate 30 C Eas Endurance Standard lead-acid accumulators Cycle life 500 Cycles cycles Endurance module can provide a very long life, even with full discharge cycles. The cycle life stays very long even at high temperature, reducing the need for temperature controlled environment Eas Endurance Standard lead-acid accumulators

4 Endurance, the new generation energy storage system Endurance is a module specifi cally designed for low duty cycle applications where high power, long life, or both are required. Safe, light, compact and easy to integrate into system cabinets, it allows you maximum fl exibility to comply with your requirements. A perfect fi t for maintenance free critical power back-up applications at the lowest cost of ownership. Thanks to high effi ciency, Endurance can be charged rapidly to have energy available quickly again after a discharge. Features: Voltage monitoring of each cell to optimize electrical performance and life duration Temperature monitoring Wide operation temperature range - 30 C to +70 C (cell case temperature) High power performance Fast charge and discharge at high current Excellent durability and reliability Over 2 million cycles possible Long lifetime (over 15 years) without maintenance Safe in use Highly scalable in terms of power, energy and voltage Easy to manage via digital signals: charge and discharge control, critical alarms Standard communication interface to monitor all modules simultaneously (only with System Manager) Data logging capabilities (only with System Manager) Exempted from most transport conditions imposed by regulation for dangerous goods. MASTER EX23MA MASTER EX33MA 155 mm 264 mm 167 mm SLAVE EX23SL SLAVE EX33SL Electrical characteristics EX23 MODEL EX33 MODEL Capacitance 192F 275F Max Voltage 45,6V Min. voltage 26,4V Max stored energy 37 Wh 53 Wh Peak power 18 kw 17 kw Mechanical charactheristics Weight 5,8 kg 5,6 kg Dimensions 264 mm x 167 mm x h155 mm (including terminals) Environmental charactheristics Operating Temperature -30/+70 C (cell case temperature) Storage Temperature -40/+80 C Rohs Compliant EMC directive CE mark Easy to transport

5 Flexible configuration to meet customized requirements Single module (stand alone use) Endurance can work alone (using a single master module) simply providing external power (12 VDC) and interfacing with digital signals to control the charge and the discharge. INTERFACE SIGNALS: +12 VDC (external power supply) Charge Enable - Discharge Enable Critical alarms (temperature - over charge - over discharge) Optional: System Manager (see below) Single string More Endurance modules can be connected in series to reach a voltage up to 950V and higher (under specifi c condition). One master module and more slave modules (depending on the voltage requirement) can be connected in series via CAT 5E cables. INTERFACE SIGNALS: +12 VDC (external power supply) Charge Enable - Discharge Enable Critical alarms (temperature - over charge - over discharge) Optional: System Manager (see below) Parallel strings (complete system) Two or more strings can be connected in parallel when more power or more energy are required. In this case the use of the system manager allows to correctly control all modules. It is easy and fast to add more strings in systems that are already operational, in order to upgrade them to match new requirements and extend the life of the system. SYSTEM MANAGER ESM01MB SYSTEM MANAGER is a control unit that has the following features: Supplies the power to all master modules (external power supply of 12 VDC is needed) Drives the output signals (dry contacts) of charge/discharge enable and critical alarms (temperature - over charge - over discharge) Provides an interface with standard communication protocols (RS-485 or CAN bus) to any external system that wants to monitor the modules state (cell voltages, temperature, alarms, Etc...) Logs modules data on micro SD card 45V MODULE

6 Derols.com About EAS EAS Elettronica SpA, based in Schio - Vicenza, Italy, is a leading company in electronic subcontracting. EAS assembles electronic boards by using both PTH and SMT technologies and is able to supply the electronic boards together with the burn-in testing, ICT and CAF tests. EAS is also an electronic and mechanical system assembler, which can also provide customized solutions. Thanks to its research and development department they can also provide the design and engineering of industrial electronic equipment, prototypes, master and samples. EAS s goal is to always be into the heart of the technology by anticipating possible needs in the electronics industry, in order to provide high quality and service each steps, from the project industrialization to its assembly, until the automatic testing of boards and electronic and mechanical assemblies. The results of this goal are guaranteeing technical solutions that are always up to date to all its customers. EAS has always invested in up-to-date machineries and quality certifi cations. EAS is already ISO 9001:2008 certifi ed and within the fi rst semester of 2015 EAS will also be ISO/TS certifi ed. In order to always guarantee a better quality/price ratio to its customer, EAS has opened a production plant in Samorin (Slovakia) - EAS Europe s.r.o in EAS s.p.a. Via Lago di Garda, Schio(VI) - Italy Tel Fax info@eas.it Powered by