Dynasty TIG/Stick Welding

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Dynasty TIG/Stick Welding"

Transcription

1 00 Series Issued February 001 Index No. AD/.0 Dynasty TIG/Stick Welding Power Source Quick Specs Heavy Industrial Applications Precision Metal Fabrication Aerospace Bicycle Manufacturing Mechanical Contractors Shipboard Installation/Repair Maintenance/Repair Operations Automation Processes TIG (GTAW) Welding Pulsed TIG (GTAW-P) Welding with DX and LX Models Stick (SMAW) Welding Input Power Requires - or 1-Phase Power Amperage Range 00 A Rated Output 0 A at 0 V, 0% Duty Cycle (AC) 00 A at 8 V, 0% Duty Cycle (DC) Weight Without Auxiliary Power: 90 lb (1 kg) With Auxiliary Power: 10 lb (8.1 kg) The Power of Blue. Advanced Squarewave arc for improved weldability on aluminum and magnesium using low power. Continuous high-frequency is NOT needed because of the advanced Squarewave arc, and extended balance control allows you to fine-tune the duration of the electrode negative portion of the cycle from 0 to 90%. This provides precise cleaning control and prolonged tungsten life. Programmable HF start parameters allows the operator to independently set HF starting conditions based upon process and memory selection. HF start for non-contact arc starting that eliminates tungsten or material contamination. Dynasty 00 SD Superior arc performance even on difficult to run electrodes like E010. Available in Three Models: SD: Provides the basic features that are required for most AC/DC TIG or Stick welding applications. DX: When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amperage, initial amperage, initial slope time, final slope time and final amperage control. LX: Automation made simple. With the Automation Interface Connector, the integrator can quickly interface to the output disable, weld start/stop, gas start/stop inputs; valid arc, pulse lock out, and end of weld sequence outputs. Dynasty 00 LX Dynasty 00 DX TIGRunner Auto-Link provides connection to 0 V or 0 V single- or three-phase power without having to remove the covers and relink the power source. Lift-Arc start for TIG arc starting without the use of high frequency. Inverter-based, AC/DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters than traditional knobs and switches. Power source is warranted for years, parts and labor. Original main power rectified parts are warranted for years. Miller Electric Mfg. Co. An Illinois Tool Works Company 1 West Spencer Street Appleton, WI 91 USA International Headquarters Phone: USA FAX: Canadian FAX: International FAX: Web Site

2 Specifications (Subject to change without notice.) For Multivoltage Units Input Power Three- Phase Single- Phase Rated Output at 0% Duty Cycle 0 A at 0 VAC 00 A at 8 VDC 0 A at 0 VAC 00 A at 8 VDC For Single-Voltage Units Rated Output at 0% Duty Cycle 0 A at 0 VAC 00 A at 8 VDC Welding Amperage Range 00 A Welding Amperage Range 00 A 00 A Max. Open- Circuit Voltage 9 VDC Max. Open- Circuit Voltage 9 VDC 9 VDC Amps Input at Rated Output, 0 Hz 0 V 0 V KVA KW Amps Input at Rated Output, 0 Hz 00 V KVA KW Dimensions H: 1 in ( mm) W: 1-1/ in (18 mm) D: in (10 mm) Dimensions H: 1 in ( mm) W: 1-1/ in (18 mm) D: in (10 mm) Net Weight Without Aux. Power: 90 lb (1 kg) With Aux. Power: 10 lb (8.1 kg) Net Weight Without Aux. Power: 90 lb (1 kg) With Aux. Power: 10 lb (8.1 kg) Certified by Canadian Standards Association to both Canadian and U.S. Standards. Conforms to European standards. Control Panels Dynasty 00 SD Dynasty 00 DX/LX Voltmeter. Ammeter. Polarity Control. Process Control. Output Control. Encoder Control. Amperage Control 8. AC Waveshape Control 9. Adjust Control 10. Sequencer Controls 11. Pulser Control 1 Dynasty 00 SD (CE) Dynasty 00 DX/LX (CE) Control Panel Parameter Values A. Preflow (s) 0.0 B. Initial Time (s) 0.0 (LX only) C. Initial Amperage (A) 00 D. Initial Slope Time (s) 0.0 E. Weld Amperage (A) F. AC Frequency (Hz) 0 0 G. Balance Control (%EN) 0 90 H. Background Amperage (%) I. Pulse Frequency (Hz) J. Peak Percent Time (%) 9 K. Final Slope Time (s) 0 L. Final Amperage (A) 00 M. Final Time (s) 0.0 (LX only) N. Postflow Time (s) O. Dig (%)

3 Performance Data WELD AMPS DUTY CYCLE CHART DC % DUTY CYCLE AC AC VOLTS VOLT/AMP CURVE, AC SMAW-MAX GTAW-MAX 0 GTAW-MIN SMAW-MIN AC AMPS (0 BALANCED) 100 VOLT/AMP CURVE, DC DC VOLTS 80 SMAW-MAX 0 GTAW-MAX 0 DIG-MIN GTAW-MIN 0 SMAW-MIN DIG-MAX DC AMPS Included Accessories Non-CE SD/DX Models Include: (1) DA180L torch adapter () International-style connectors /0 Non-CE LX Model Includes: (1) DA180L torch adapter () International-style connectors /0 (1) 1-pin amphenol with clamp (1) 10-pin amphenol with clamp CE SD/DX Models Include: () International-style connectors /0 (1) 1-pin amphenol with clamp (1) /8 in - 18 gas fitting CE LX Model Includes: () International-style connectors /0 (1) 1-pin amphenol with clamp (1) 10-pin amphenol with clamp (1) /8 in - 18 gas fitting TIGRunner Packages Dynasty 00 SD w/tigrunner #90 80 Dynasty 00 DX w/tigrunner #90 81 Includes Dynasty 00 SD or DX, Auxiliary Power, Coolmate, Deluxe Carrying Cart and Cylinder Rack, and Remote Foot Control (completely assembled). Dynasty 00 SD w/tigrunner and Torch # Dynasty 00 DX w/tigrunner and Torch # Includes Dynasty 00 SD or DX, Auxiliary Power, Coolmate, Deluxe Carrying Cart and Cylinder Rack, and Remote Foot Control (completely assembled). Also a -ft 0-Amp, Water-Cooled DB0MR Diamondback Torch, Work Clamp, 10-ft Gas Hose, Regulator/Flowmeter, Cable Cover, and an AK- Accessory Kit.

4 Genuine Miller Accessories Remote Controls RFCS-1 HD Foot Control #19 after serial number JK1. This new design increases stability with a larger base and durability with a heavier cord. Maximum flexibility is accomplished with a reconfigurable cord that can exit the front, back or either side of the pedal. Foot pedal provides remote current and contactor control. Includes 0 ft ( m) cord and 1-pin plug. RCCS-1 Remote Contactor and Current Control # pin plug after serial number JK1. North/south rotary-motion fingertip control fastens to TIG torch using two Velcro straps. Great for applications that require a finer amperage control. Includes. ft (8 m) control cord. RCC-1 Remote Contactor and Current Control # pin plug after serial number JK1. Side-to-side rotary-motion fingertip control fastens to TIG torch using two Velcro straps. Great for production or contractors that need quick ramp-up. Includes. ft (8 m) control cord. RMLS-1 Switch #19 after serial number JK1. Momentaryand maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes. ft (8 m) cord and 1-pin plug. RMS-1 On/Off Control #18 08 after serial number JK1. Momentarycontact switch for contactor control. Rubber-covered pushbutton dome switch ideal for repetitive on-off applications. Includes. ft (8 m) cord and 1-pin plug. RFCS-1 Foot Control #0 after serial number JK1. Foot pedal provides remote current and contactor control. Includes 0 ft ( m) cord and 1-pin plug.

5 Genuine Miller Accessories (Continued) Carts and Racks Educational Resources Gas Tungsten Arc (TIG) Welding Book #10 To order, call the Miller Literature Distribution Center at , or FAX A comprehensive, 8-page text on all aspects of the TIG process. Deluxe Carrying Cart and Cylinder Rack #0 8 Accommodates inverter power source, cooler, and one gas cylinder. Includes bottom drawer for miscellaneous items. Universal Carrying Cart and Cylinder Rack #0 9 Accommodates power source, plus one gas cylinder up to in (1. cm) high measuring to 9 in (1. to.8 cm) in diameter. Also provides storage for auxiliary items such as electrodes, helmets, gloves, etc. Can also be used with XMT, Dynasty Series, Maxstar Series, and Millermatic 10 power sources. Running Gear/Cylinder Rack #0 Has adjustable handles and is slanted for convenient access to power source front panel controls. Carries two 10 lb (. kg) gas cylinders, or one gas cylinder and one Coolmate V coolant system for TIG (GTAW) welding. Can be used with the Dynasty, Maxstar, Invision or XMT inverter power supplies. Also accommodates Radiator, Watermate, or Coolmate coolant systems. Inverter Rack #0 -Rack 0/0 V The XMT 0 Rack conveniently houses multiple power sources for multiple welders. This is an ideal system for onsite applications including construction and ship building. TIG Fundamentals Welding CD #19 To order, please call , or FAX , or log on to our Web site. An interactive CD designed for anyone who s looking to better understand the TIG process. TIG (GTAW) Torches Diamondback TIG Torches The NEW Diamondback line of ergonomically designed TIG torches from Miller Electric complements the most popular TIG power source line available today. The Diamondback torch line includes both air-cooled and water-cooled models. The air-cooled models range in size from 1 to 00 A. The water-cooled models include 0 and 0 A torches. All models are standard with a rigid head. See Diamondback TIG Torch Selector Guide. TIG (GTAW) Torch Adapters DA-91F #19 0 Used to adapt a 1-piece 1 or 10 amp air-cooled torch to an International-style connector. DA-180L # Used to adapt a 0 or 0 amp watercooled torch to an International-style connector. DA-R #19 Used to adapt a 1-piece 00 amp air-cooled torch to an International-style connector.

6 Genuine Miller Accessories (Continued) Coolant Systems For more information, see the Miller Coolant Systems literature sheet, Index No. AY/.. Coolmate # VAC # VAC, CE # VAC # VAC, CE For use with water-cooled torches rated up to 00 amps. Unique paddle-wheel indicator, external filter and easy-fill spout. Coolmate V # VAC # VAC, CE For use with water-cooled torches rated up to 00 amps. Vertical design conveniently mounts to Miller cylinder rack in place of one cylinder. Coolmate # VAC # VAC, CE For use with water-cooled torches rated up to 00 amps. Tough molded polyethylene case with carrying handle. Coolmate Low-Conductivity Coolant #0 810 Sold in multiples of four in 1-gallon recyclable plastic bottles. Primarily used in TIG (high-frequency) applications, but can also be used in MIG systems where aluminum is not in the water path. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to - F (-8 C) or boiling to F (108 C). Also contains a compound that resists algae growth. Coolmate V Coolmate Aluminum-Protecting Coolant #0 809 Sold in multiples of four in 1-gallon recyclable plastic bottles. Primarily used in MIG products, such as the water-cooled XR, which has an aluminum drive housing, or in any system where high frequency is not used. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to - F (-8 C) or boiling to F (108 C). Also contains a compound that resists algae growth. International-Style Connectors (Will accept Dinse or other International connectors.) Note: All Dynasty power sources are equipped with International-style connectors for secondary connections. (Power source is shipped with two 0-mm male International-style plugs for use with #1 or # AWG size cable.) International-Style Connector Kit # mm Accepts #1 or # AWG cable size. Required if male plugs shipped with power source must be replaced, if additional plugs are needed. Kit includes one International-style male plug which attaches to the work and/or weld cables and plugs into the International-style receptacles on the power source. Extension Kit for International-Style Cable Connectors # mm Accepts #1 or # AWG size cable. Used to adapt or extend weld and/or work cables. Kit includes one male International-style plug and one in-line female International-style receptacle. International/Tweco Adapter #0 A one-piece adapter which has an International-style male plug (to power source) on one end and a female Tweco receptacle (for weld cable connection) on other end. International/Cam-Lok Adapter #0 A one-piece adapter which has an International-style male plug (to power source) on one end and a Cam-Lok receptacle (for weld cable connection) on other end.

7 Typical Installations TIG (GTAW) Basic Equipment Remote Control TIG Torch Shielding Gas Cylinder Work Stick (SMAW) Basic Equipment Stick Electrode Work

8 Ordering Information Equipment and Options Stock No. Description Qty. Price Power Source Dynasty 00 SD #90 8 Basic controls, 0/0 VAC, 0/0 Hz #90 8 Basic controls, 00 VAC, 0/0 Hz, CE # Basic controls w/11 V auxiliary power, 0/0 VAC, 0/0 Hz # Basic controls w/11 V auxiliary power, 00 VAC, 0/0 Hz, CE Dynasty 00 DX# Full feature controls, 0/0 VAC, 0/0 Hz # Full feature controls, 00 VAC, 0/0 Hz, CE # Full feature controls w/11 V auxiliary power, 0/0 VAC, 0/0 Hz # Full feature controls w/11 V auxiliary power, 00 VAC, 0/0 Hz, CE Dynasty 00 LX w/auxiliary Power # Full feature controls w/11 V auxiliary power & required automation connections # Full feature controls w/11 V aux. power & required automation connections, CE Dynasty 00 SD w/tigrunner #90 80 Basic controls w/tigrunner package (see pg ) Dynasty 00 SD w/tigrunner and Torch # Basic controls w/tigrunner & 0 A torch package (see pg ) Dynasty 00 DX w/tigrunner #90 81 Full feature controls w/tigrunner package (see pg ) Dynasty 00 DX w/tigrunner and Torch # Full feature controls w/tigrunner & 0 A torch package (see pg ) TIG Accessories TIG Torch Adapters #19 0 DA-91F # DA-180L #19 DA-R Diamondback TIG Torches See Diamondback TIG Torch Selector Guide Consumables, Tungsten See Parts Guide Gas Cylinder, Gas Hose and Fittings Stick Accessories Stick Electrodes Remote Controls RFCS-1 HD #19 Heavy-duty foot control RFCS-1 #0 Foot control RCCS-1 #0 88 North/south fingertip control RCC-1 #11 08 Side-to-side fingertip control RMLS-1 #19 Momentary/maintained rocker control RMS-1 #18 08 Momentary rubber dome switch Carts and Racks Deluxe Carrying Cart and Cylinder Rack #0 8 Universal Carrying Cart and Cylinder Rack #0 9 Running Gear/Cylinder Rack #0 Inverter Rack #0 Educational Resources Gas Tungsten Arc (TIG) Welding Book #10 TIG Fundamentals Welding CD #19 Coolant Systems Coolmate # VAC # VAC, CE # VAC # VAC, CE Coolmate V # VAC # VAC, CE Coolmate # VAC # VAC, CE Aluminum-Protecting Coolant #0 809 Low-Conductivity Coolant #0 810 Cooling System Hoses International-Style Connectors International-Style Connector Kit # mm Extension Kit for International-Style # mm International/Tweco Adapter #0 A one-piece adapter with International-style male plug International/Cam-Lok Adapter #0 A one-piece adapter with International-style male plug Date: Total Quoted Price: Distributed by: Litho in USA

Maxstar TIG/Stick Welding

Maxstar TIG/Stick Welding 00 Series Issued March 00 Index No. DC/ Maxstar TIG/Stick Welding Power Source Quick Specs Heavy Industrial Applications Petro/Chem Fabrication Aerospace Food/Beverage Industry Mechanical Contractors Pressure

More information

Enhanced low-end performance for stainless steel and thin-metal applications.

Enhanced low-end performance for stainless steel and thin-metal applications. XMT 400 CC/CV Issued January 2004 Index No. DCX/18.92 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck and Trailer Manufacturing Fabrication

More information

Processes MIG (GMAW)/Pulsed MIG (GMAW-P) Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)

Processes MIG (GMAW)/Pulsed MIG (GMAW-P) Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A) XMT 34/456 CC/CV Issued August 21 Index No. DC/18.8 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication

More information

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux-Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux-Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A) XMT 350/450 Series Issued July 2012 Index No. DC/18.83 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication

More information

Issued April 2018 Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma cutting Resistance welding

Issued April 2018 Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma cutting Resistance welding Issued April 2018 Index No. AY/7.2 Coolmate Series Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube mills Automation Processes TIG (GTAW) MIG (GMAW)

More information

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A) XMT 350 Series Issued August 2010 Index No. DC/18.83 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication

More information

*Available on select models.

*Available on select models. XMT 350 Series Issued Sept. 2017 Index No. DC/18.93 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/trailer manufacturing Fabrication

More information

Processes TIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Dynasty 350. Original main power rectifier parts are warranted for 5 years.

Processes TIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Dynasty 350. Original main power rectifier parts are warranted for 5 years. 35 and 7 Issued March 28 Index No. A/5. ynasty IG/Stick Welding Power Source Quick Specs Industrial Applications Precision Fabrication Heavy Fabrication Pipe and ube Fabrication Aerospace Aluminum Ship

More information

Miller Legend 301 G. The Power of Blue. Quick Specs. Gas Engine-Driven Welder/Generator

Miller Legend 301 G. The Power of Blue. Quick Specs. Gas Engine-Driven Welder/Generator Miller Legend 301 G Issued December 2002 Index No. ED/4.2 Gas Engine-Driven Welder/ Quick Specs Industrial Applications Fabrication Structural Steel Process Plant Piping Maintenance Processes (X-Ray Quality)

More information

Millermatic MIG Arc Welding Power Source,

Millermatic MIG Arc Welding Power Source, 252 Issued April 2013 Index No. DC/12.49 Millermatic MIG Arc Welding Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light

More information

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz Millermatic 212 Auto-Set Issued Sept. 2009 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power

More information

PipeWorx Welding System

PipeWorx Welding System PipeWorx Welding System Issued Aug. 009 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe The Power

More information

Processes MIG (GMAW) Welding. Input Power 24 VAC, 50/60 or 100 Hz

Processes MIG (GMAW) Welding. Input Power 24 VAC, 50/60 or 100 Hz XR -Control Issued April 2005 Index No. M/1.7 Push-Pull Wire Feed System Quick Specs Heavy Industrial Applications Emergency Vehicles Recreational Vehicles Shipbuilding Tool Boxes Trucks and Trailers Heat

More information

PipePro Welding System

PipePro Welding System PipePro Welding System Root-Fill-Cap Welding Issued Feb. 008 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe

More information

PipePro Welding System

PipePro Welding System PipePro Welding System Root-Fill-Cap Welding Issued Apr. 00 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe Fabrication

More information

PipeWorx Welding System

PipeWorx Welding System PipeWorx Welding System Issued Jan. 011 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes

More information

PipeWorxFieldPro System

PipeWorxFieldPro System PipeWorxFieldPro System Issued June 2013 Index No. PWS/6.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Field Operations Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes

More information

Issued Feb Index No. M/ Series

Issued Feb Index No. M/ Series Issued Feb. 017 Index No. M/.0 70 Series Constant-Speed Wire Feeder Quick Specs Heavy Industrial Applications Heavy manufacturing Metal fabrication Construction Light manufacturing Processes MIG (GMAW)

More information

Standard features include: digital preset weld meters, output contactor control, and automatic idle.

Standard features include: digital preset weld meters, output contactor control, and automatic idle. Big 300 Pro Issued September 2011 Index No. ED/5.21 Blue Diesel Engine-Driven Welder/AC Generator Quick Specs Heavy Industrial Applications Mechanical Contractors Structural Steelwork Fabrication Maintenance

More information

Processes Stick (SMAW) MIG (GMAW) Flux-cored (FCAW) RMD Pulsed MIG (GMAW-P) DC TIG (GTAW) Air carbon arc (CAC-A) Rated: 1/4-inch (6.

Processes Stick (SMAW) MIG (GMAW) Flux-cored (FCAW) RMD Pulsed MIG (GMAW-P) DC TIG (GTAW) Air carbon arc (CAC-A) Rated: 1/4-inch (6. Big Blue 400 PipePro Issued Aug. 2017 Index No. ED/5.8 Diesel Engine-Driven Welder/AC Generator Quick Specs Heavy Industrial Applications Cross-country pipeline Process pipe welding Processes Stick (SMAW)

More information

Big Blue 400 Pro ARC FLEXIBLE. Quick Specs DURABLE BUILT TO LAST. Diesel Engine-Driven Welder/AC Generator WELDS SUPERIOR

Big Blue 400 Pro ARC FLEXIBLE. Quick Specs DURABLE BUILT TO LAST. Diesel Engine-Driven Welder/AC Generator WELDS SUPERIOR Big Blue 400 Pro Issued Aug. 2017 Index No. ED/5.7 Diesel Engine-Driven Welder/AC Generator Quick Specs Heavy Industrial Applications Mechanical contractors Structural steelwork Fabrication Maintenance

More information

Trailblazer 325 Diesel

Trailblazer 325 Diesel Trailblazer 325 Diesel Issued Jan. 2015 Index No. ED/4.85 Diesel Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Fabrication Maintenance Repair Structural Steel Work Pipe Sheet Metal

More information

Issued Dec Index No. ED/4.8 Trailblazer 325 Diesel

Issued Dec Index No. ED/4.8 Trailblazer 325 Diesel Issued Dec. 2017 Index No. ED/4.8 Trailblazer 325 Diesel Diesel Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Fabrication Maintenance Repair Structural steel work Sheet metal Pipe

More information

Trailblazer 275 and325

Trailblazer 275 and325 Trailblazer 275 and25 Issued April 2016 Index No. ED/4.75 Gas or LP Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Fabrication Maintenance Repair Structural steel work Sheet metal

More information

Trailblazer 275 and 325

Trailblazer 275 and 325 Trailblazer 275 and 325 Issued July 2012 Index No. ED/4.75 Gas or LP Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Fabrication Maintenance Repair Structural Steel Work Sheet Metal

More information

Series. Welder/generator is warranted for 3 years, parts and labor. Engine is warranted separately by the engine manufacturer.

Series. Welder/generator is warranted for 3 years, parts and labor. Engine is warranted separately by the engine manufacturer. Bobcat Series Issued Oct. 2008 Index No. ED/4.4 Gas, LP or Diesel Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Maintenance Repair Farm/Ranch Applications Fabrication Structural

More information

Diesel Engine-Driven Welder/AC Generator

Diesel Engine-Driven Welder/AC Generator Issued Dec. 2015 Index No. ED/11.5 Big Blue 600 Pro Heavy Industrial Applications Quick Specs Diesel Engine-Driven Welder/AC Generator Processes Heavy construction Structural steel Mining maintenance Maintenance

More information

Big Blue 600 Pro Tackle tough jobs that require high-output for welding, gouging, and auxiliary power.

Big Blue 600 Pro Tackle tough jobs that require high-output for welding, gouging, and auxiliary power. Big Blue 600 Series Issued Oct. 2017 Index No. ED/11.5 Diesel Engine-Driven Welder/AC Generator Quick Specs Heavy Industrial Applications Maintenance and repair rigs Heavy construction Mining maintenance

More information

Bobcat 250 (gas model) shown. Welder/generator is warranted for 3 years, parts and labor. Engine is warranted separately by the engine manufacturer.

Bobcat 250 (gas model) shown. Welder/generator is warranted for 3 years, parts and labor. Engine is warranted separately by the engine manufacturer. Bobcat Series Issued January 2007 Index No. ED/4.4 Gas, LP or Diesel Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Maintenance Repair Farm/Ranch Applications Fabrication Structural

More information

Big Blue 800 Series. Quick Specs. Diesel Engine-Driven Welder/AC Generator

Big Blue 800 Series. Quick Specs. Diesel Engine-Driven Welder/AC Generator Big Blue 800 Series Issued Sept. 2017 Index No. ED/14.0 Diesel Engine-Driven Welder/AC Generator Quick Specs Heavy Industrial Applications Pipe welding Maintenance and repair rigs Mechanical contractor

More information

Series. Optional Bobcat 250 EFI Model with 12,000 Watts and More Weld Power!

Series. Optional Bobcat 250 EFI Model with 12,000 Watts and More Weld Power! Bobcat Series Issued April 2010 Index No. ED/4.4 Gas, LP or Diesel Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Maintenance Repair Farm/Ranch Applications Fabrication Structural

More information

Trailblazer 275 and325

Trailblazer 275 and325 275 and325 Issued April 2015 Index No. ED/4.75 Gas or LP Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Fabrication Maintenance Repair Structural Steel Work Sheet Metal Pipe Processes

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS ENGINE DRIVEN WELDER Diesel Engine Driven Welder Manual Processes For demanding jobs that call for high amperage capabilities, the offers 400 amps for DC stick welding and 3,000 watts of AC power. Designed

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS Multi-WeldTM 350 MULTI-OPERATOR Connect Several DC+ Welders to One Power Supply. The is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the

More information

Trailblazer welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry.

Trailblazer welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry. Trailblazer 325 Issued Dec. 2017 Index No. ED/4.75 Gas or LP Engine-Driven Welder/AC Generator Quick Specs Industrial Applications Fabrication Maintenance Repair Structural steel work Sheet metal Pipe

More information

taunton Broadway Route 138

taunton Broadway Route 138 MIL300837 Miller ArcStation 30FX Welding Table $279.99 MIL300850 X-Clamps 5 $39.99 each The Miller ArcStation 30FX is the ideal work surface for the welder who requires portability and space savings. The

More information

Big Blue 700 Series. Quick Specs. Diesel Engine-Driven Welder/AC Generator

Big Blue 700 Series. Quick Specs. Diesel Engine-Driven Welder/AC Generator Big Blue 700 Series Issued April 2017 Index No. ED/5.6 Diesel Engine-Driven Welder/AC Generator Quick Specs Heavy Industrial Applications Pipe welding Mechanical contractor Construction Repair Processes

More information

Syncrowave 250 DX / 350 LX

Syncrowave 250 DX / 350 LX TM-363R 204 04 Processes TIG (GTAW) Welding Stick (SMAW) Welding Arc Welding Power Source Syncrowave 250 DX / 350 LX CE And Non-CE Models Eff w/lh0000l And Following For OM-363 (23 ) Revision R And Following,

More information

Engine Drive Buyer s Guide. For Welding and Power Generation

Engine Drive Buyer s Guide. For Welding and Power Generation Engine Drive Buyer s Guide For Welding and Power Generation April 2009 Table of Contents Engine Drive Products Understanding Features and Benefits Page Reliability 2 Welding Processes 3 Welding Amperage

More information

DUAL VANTAGE 800-I ENGINE-DRIVEN WELDER/GENERATOR

DUAL VANTAGE 800-I ENGINE-DRIVEN WELDER/GENERATOR DUAL VANTAGE 800-I ENGINE-DRIVEN WELDER/GENERATOR The Power of Two On the construction site, along the pipeline or in any other rugged environment, welding must get done on time and with minimal rework.

More information

Continuum Systems ARC FLEXIBLE. Quick Specs EASY TO SET UP. Take your welding to the next level. Advanced MIG Welding Systems SUPERIOR

Continuum Systems ARC FLEXIBLE. Quick Specs EASY TO SET UP. Take your welding to the next level. Advanced MIG Welding Systems SUPERIOR Systems Issued ec. 2017 Index No. C/36.0 dvanced MIG Welding Systems Quick Specs Heavy Industrial Manufacturing Construction equipment utomotive components Recreational vehicles Farm machinery Office furniture

More information

Repeatable welds again, and again, and again

Repeatable welds again, and again, and again INERTER CC DC AMP 575 Repeatable welds again, and again, and again 5 Year * Ultima comes with: Ultima unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma Arc

More information

A at 25 V, 20% Duty Cycle

A at 25 V, 20% Duty Cycle Blue Star 145 DX and 185 DX See Literature No. ED/2.5 Reliable outdoor portable power! Great for farm, ranch, maintenance, construction and hobbyist. Blue Star 145 DX Blue Star 185 DX Compact and portable,

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS ENGINE DRIVEN WELDERS Vantage 500 Setting A New Standard! If you are looking for a rugged, reliable and capable welder for demanding construction, rental fleet or repair applications, take a close look

More information

LF-72 AND LF-74 WIRE FEEDERS

LF-72 AND LF-74 WIRE FEEDERS LF-72 AND LF-74 WIRE FEEDERS Shown with options: See page 4 for all models ISO 9001:2000 14001:2004 2-ROLL OR 4-ROLL HEAVY DUTY INDUSTRIAL FEEDERS Designed for MIG and cored wire welding in job shop and

More information

VANTAGE 400 Compact, Multi-Process, Excellent Value

VANTAGE 400 Compact, Multi-Process, Excellent Value VANTAGE 400 Compact, Multi-Process, Excellent Value www.lincolnelectric.com/green KEY FEATURES Processes» The quiet, compact Vantage 400 is an ideal choice for construction teams, pipe rig owners and rental

More information

MAKE WORK FLY. Eagle 10,000 Plus KEY FEATURES

MAKE WORK FLY. Eagle 10,000 Plus KEY FEATURES MAKE WORK FLY Eagle 10,000 Plus Shown: K2343-3 KEY FEATURES A great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Eagle 10,000 Plus does a variety

More information

Output Range See Back Page Rated Output Current/Voltage/Duty Cycle 500A/40V/100% 550A/36V/60% 575A/35V/50% Number of Cylinders 4 APPLICATIONS

Output Range See Back Page Rated Output Current/Voltage/Duty Cycle 500A/40V/100% 550A/36V/60% 575A/35V/50% Number of Cylinders 4 APPLICATIONS Vantage 500 Processes Stick, TIG, MIG, Flux-Cored, Gouging Product Number K2405-2 See back for complete specs Output Range See Back Page Rated Output Current/Voltage/Duty Cycle 500A/40V/100% 550A/36V/60%

More information

LENCO WELDING ACCESSORIES LTD. SECTION 500

LENCO WELDING ACCESSORIES LTD. SECTION 500 LENCO WELDING ACCESSORIES LTD. SECTION 500 WATER COOLERS PAGE 1 SECTION 500 LENCO WELDING ACCESSORIES LTD. Note: Information on R2200V and R4000 available from our order desk 1-800-265-5678 DEFENSE ANTI-FREEZE

More information

LF-72 and LF-74 Wire Feeders

LF-72 and LF-74 Wire Feeders SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output

More information

DIRECT CONNECT Solid State Spool Gun

DIRECT CONNECT Solid State Spool Gun STANDARD FEATURES Economical feeder/gun combination eliminates need for additional wire feeder Lightweight design reduces operator fatigue 0 hose/cable assembly offers maximum portability for remote operation

More information

APEX 2100 ORBITAL WELDING SYSTEM. Designed Smart. Made Simple.

APEX 2100 ORBITAL WELDING SYSTEM. Designed Smart. Made Simple. APEX 2100 ORBITAL WELDING SYSTEM Designed Smart. Made Simple. APEX 2100 Orbital We Designed Smart. Made Simple. lding System Designed to incorporate new technologies in welding, built to withstand rugged

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS ENGINE DRIVEN WELDERS 480V Portable Power for the Farm, Ranch or Job Site Select the for portable auxiliary power demands on the farm, ranch or construction sites. This rugged Ranger delivers up to 11,500

More information

Output Range See Back Page Rated Output Current/Voltage/Duty Cycle 300A/32V/100% 350A/28V/100% Number of Cylinders 4 APPLICATIONS

Output Range See Back Page Rated Output Current/Voltage/Duty Cycle 300A/32V/100% 350A/28V/100% Number of Cylinders 4 APPLICATIONS www.lincolnelectric.com/green ENGINE DRIVEN WELDERS Vantage 300 Processes Stick, TIG, MIG, Flux-Cored, Gouging Product Number K2409-3 See back for complete specs Compact, Multi-Process, Excellent Value

More information

EXTRA POWER, EXTRA PERFORMANCE Ranger 250 GXT

EXTRA POWER, EXTRA PERFORMANCE Ranger 250 GXT EXTRA POWER, EXTRA PERFORMANCE Ranger 250 GXT Shown: Ranger 250 GXT Red Paint (K2382-4) and Ranger 250 GXT Stainless (2382-5) KEY FEATURES The Ranger 250 GXT has all the extras you need for construction

More information

ARC WELDING EQUIPMENT TABLE OF CONTENTS

ARC WELDING EQUIPMENT TABLE OF CONTENTS ARC WELDING EQUIPMENT TABLE OF CONTENTS Description Page Description Page Welding Process Descriptions... IFC Table of Contents... 1 Arc Welding Equipment Selection Guide... 2, 3 Compacts (power source

More information

Welders. Dependable welding performance.

Welders. Dependable welding performance. Welders Dependable welding performance www.multiquip.com 135 to 180 Amp Welders BDW180MC 180 amp welder Battery powered BDW180MC n One-of-a-kind recharageable battery welder. n Quiet with no exhaust fumes;

More information

OM D. Processes. TIG (GTAW) Welding. Stick (SMAW) Welding. Description. Arc Welding Power Source STH 270

OM D. Processes. TIG (GTAW) Welding. Stick (SMAW) Welding. Description. Arc Welding Power Source STH 270 OM-65 70D 05 07 Processes TIG (GTAW) Welding Stick (SMAW) Welding Description Arc Welding Power Source STH 70 CE From Miller to You Thank you and congratulations on choosing Miller. Now you can get the

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS ENGINE DRIVEN WELDERS At Your Service - Everyday! The is the right choice for a general contractor, maintenance team, farmer or home owner looking for a high-capacity AC generator with 10,000 watts peak

More information

GTAW, GMAW, FCAW, SAW

GTAW, GMAW, FCAW, SAW June 996 Form: OM-278C Effective With Serial No. KG0543 OWNER S MANUAL Dimension 652 (60 Hz) Dimension 82 (50/60 Hz) CC/CV DC Welding Power Source For SMAW, GTAW, GMAW, FCAW, SAW Welding, And CAC-A Cutting

More information

GMAW FCAW AMP. Higher Output. The Fabricator 140 punches out 140 amp maximum output.

GMAW FCAW AMP. Higher Output. The Fabricator 140 punches out 140 amp maximum output. Fabricator 40 40 C DC 20 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repairs Sheet Metal Fabrication

More information

Power MIG. The Professional s Choice.

Power MIG. The Professional s Choice. WIRE FEEDER/WELDERS Power MIG. The Professional s Choice. When you want the flexibility of more than just a MIG machine, the new is the choice for you. Lincoln Chopper Technology delivers more welding

More information

APPLICATIONS Pipeline Construction Maintenance and Repair

APPLICATIONS Pipeline Construction Maintenance and Repair ENGINE DRIVEN WELDERS Classic Processes Stick, TIG, MIG (1), Flux-Cored (1), Gouging (1) CV wire welding with K3964-1 Wire Feed Module Product Numbers K3198-1 Classic 300 HE (Kubota ) See back for complete

More information

OPERATION INSTRUCTIONS

OPERATION INSTRUCTIONS www.r-techwelding.co.uk Email: sales@r-techwelding.co.uk Tel: 01452 733933 Fax: 01452 733939 ProArc 175 INVERTER ARC WELDER OPERATION INSTRUCTIONS Version 2017-10 2 3 Thank you for selecting the R-Tech

More information

CLASSIC 300 MP ENGINE-DRIVEN WELDER / GENERATOR

CLASSIC 300 MP ENGINE-DRIVEN WELDER / GENERATOR CLASSIC 300 MP ENGINE-DRIVEN WELDER / GENERATOR Excellent for Pipelines, Construction and Maintenance The Classic 300 MP When it comes to pipeline construction and maintenance, you deal with more unpredictable

More information

305 LPG. Output Range See Back Page Rated Output - Current/Voltage/Duty Cycle 300A DC CC/25V/100% 300A DC CV/25V/100% Number of Cylinders 2

305 LPG. Output Range See Back Page Rated Output - Current/Voltage/Duty Cycle 300A DC CC/25V/100% 300A DC CV/25V/100% Number of Cylinders 2 Ranger 305 LPG ENGINE DRIVEN WELDERS Processes Stick, TIG, MIG, Flux-Cored, Gouging Product Number K2937-1 See back for complete specs Output Range See Back Page Rated Output - Current/Voltage/Duty Cycle

More information

Power Feed 10R. Compact Wire Drive System for Automation. Processes. Description. Recommended General Options. Advantage Lincoln

Power Feed 10R. Compact Wire Drive System for Automation. Processes. Description. Recommended General Options. Advantage Lincoln AUTOMATIC WIRE FEEDERS Power Feed 10R Compact Wire Drive System for Automation The is a high performance, digitally controlled wire feeder designed to be a part of a modular, multi-process welding system.

More information

SAE- 300 MP ENGINE-DRIVEN WELDER / GENERATOR

SAE- 300 MP ENGINE-DRIVEN WELDER / GENERATOR SAE- 300 MP ENGINE-DRIVEN WELDER / GENERATOR Quality and Efficiency on the Pipeline The SAE -300 MP When it comes to pipeline construction and maintenance, you deal with more unpredictable variables than

More information

Precision TIG 225 PARTS LIST FOR RETURN TO MAIN INDEX

Precision TIG 225 PARTS LIST FOR RETURN TO MAIN INDEX Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-536 RETURN TO MAIN INDEX PARTS LIST FOR Precision TIG 225 P-536 P-536-A P-536-A

More information

Processes 200A 500A. MIG (GMAW) Welding 400A. Compatible with Centerfire, Quik Tip and TOUGH LOCK Consumable Series for better arc starts

Processes 200A 500A. MIG (GMAW) Welding 400A. Compatible with Centerfire, Quik Tip and TOUGH LOCK Consumable Series for better arc starts Bernard BTB MIG Guns Issued Nov. 2017 Index No. BTB/1.7 Semi Automatic Air-Cooled MIG Welding Guns Quick Specs Applications Heavy Equipment Shipbuilding Pipeline Fabrication Processes MIG (GMAW) Welding

More information

Welding without compromise

Welding without compromise WELDMATIC LIGHT INDUSTRIAL MIG WELDERS Welding without compromise Finely tuned to give you smooth, high performance welds Suited to single phase power Made in Australia www.welding.com.au At WIA, we are

More information

ARM YOURSELF WITH THE RIGHT WELDER

ARM YOURSELF WITH THE RIGHT WELDER ARM YOURSELF WITH THE RIGHT WELDER Ranger 225 Shown: Ranger 225, K2857-1 KEY FEATURES The Ranger 225 is a multi-process, engine-driven welder designed for a variety of processes stick, TIG, MIG or flux

More information

MMA 160S ARC/MMA WELDER OPERATION INSTRUCTIONS

MMA 160S ARC/MMA WELDER OPERATION INSTRUCTIONS www.r-techwelding.co.uk MMA 160S ARC/MMA WELDER OPERATION INSTRUCTIONS 2 Thank you for selecting the R-Tech MMA160S Inverter Arc Welder. The MMA160S has many benefits over traditional Arc welders, including

More information

APPLICATIONS. Construction Maintenance and Repair Ranch/Farm FEATURES, CONT D.

APPLICATIONS. Construction Maintenance and Repair Ranch/Farm FEATURES, CONT D. ENGINE DRIVEN WELDERS Eagle 10,000 Plus Processes Stick, TIG, MIG (1), Flux-Cored (1), Gouging Product Number K2343-3 See inside for complete specs Output Range 50-225A DC CC Welding 10,500 Watts Surge

More information

STRESSTECH CAPABILITIES

STRESSTECH CAPABILITIES STRESSTECH CAPABILITIES M A C T E C H H E A T T R E A T I N G S O L U T I O N S HEAT TREATING A Division of Mactech STRESS RELIEVING CONSOLES STRESSTECH manufactures three portable stress relieving consoles

More information

250 GXT APPLICATIONS. Construction Maintenance and Repair Ranch/Farm FEATURES, CONT D.

250 GXT APPLICATIONS. Construction Maintenance and Repair Ranch/Farm FEATURES, CONT D. ENGINE DRIVEN WELDERS Ranger 250 GXT Processes Stick, TIG, MIG, Flux-Cored, Gouging Product Number K2382-4 K2382-5 See inside for complete specs Output Range 50-250A AC/DC 14-28V CV Welding 11,000 Watts

More information

301.5, 301.6, Mini Hydraulic Excavator

301.5, 301.6, Mini Hydraulic Excavator 301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563

More information

Equipment for manual metal arc (MMA) welding

Equipment for manual metal arc (MMA) welding Equipment for manual metal arc (MMA) welding www.cemont.com POWER SOURCES FOR MMA WELDING COLT 2.5 / 3.2 Ø ELECTRODES.6 to 3.2 mm The COLT range, known for its exceptional weight/power ratio, is suitable

More information

A WELDER FOR ALL SEASONS

A WELDER FOR ALL SEASONS A WELDER FOR ALL SEASONS Ranger 305 G, Ranger 305 G EFI Shown: Ranger 305 G, K1726-5 Ranger 305 G EFI, K3928-1 Ranger 305G EFI Fall Camo Case, K3928-10 KEY FEATURES Processes» Make the Ranger 305 G your

More information

Induction Power Supplies

Induction Power Supplies Induction Power Supplies 7.5kW; 135 400kHz 480V version (Integral Heat Station) User s Guide Model 7.5-135/400-3-480 SMD Control Brds Rev. D 5/08 Table of Contents 1. Specifications and features...3 2.

More information

Manual Welding Accessories

Manual Welding Accessories Manual Welding Accessories SHORTSTUBS TM promote higher productivity, less waste, less cost and less inventory. Designed for easy installation of electrodes and built to last with a high impact, high heat,

More information

APPLICATIONS. Construction Maintenance and Repair Ranch/Farm FEATURES, CONT D.

APPLICATIONS. Construction Maintenance and Repair Ranch/Farm FEATURES, CONT D. ENGINE DRIVEN WELDERS Ranger 225 Processes Stick, TIG, MIG, Flux-Cored, Gouging Product Number K2857-1 See inside for complete specs Output Range 50-225A DC 15-25V CV Welding 10,500 Watts Peak AC Generator

More information

ARC Welder Assembly & Operating Instructions

ARC Welder Assembly & Operating Instructions HIT70 201604 ARC Welder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every

More information

MERKLE CompactMIG. The professional MIG/MAG series! MIG / MAG ELECTRODE

MERKLE CompactMIG. The professional MIG/MAG series!  MIG / MAG ELECTRODE MERKLE CompactMIG. The professional MIG/MAG series! MIG / MAG ELECTRODE www.merkle.de THE COMPACT POWERFUL MIG/MAG-MACHINES! CompactMIG 280 K CompactMIG 400 K Functionality and ease of operation Simple,

More information

WELDING & CUTTING EQUIPMENT

WELDING & CUTTING EQUIPMENT WELDING & CUTTING EQUIPMENT www.dnhsecheroninds.com PROILE D & H Sécheron in a span of over 48 years has become a well established/well accepted group of welding companies. D & H Sécheron Industries Private

More information

PRO Robotic Guns. Thru-Arm Torch Current Range: 550A Duty Cycle: 100% Wire Diameter:.035-5/64 in. ( mm) APPLICATIONS

PRO Robotic Guns. Thru-Arm Torch Current Range: 550A Duty Cycle: 100% Wire Diameter:.035-5/64 in. ( mm) APPLICATIONS Magnum PRO Robotic Guns ACCESSORIES Processes MIG, MIG Pulsed, Flux-Cored Product Number See chart below Thru-Arm Torch Current Range: 550A Duty Cycle: 00% Wire Diameter:.035-5/64 in. (0.9-2.0 mm) External

More information

PAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation

PAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation MASTERXL PLUS- Air Plasma Cutting Systems 3 Year Warranty PakMaster 50XL PLUS-CE GENUINE CUT 12.7mm ( 1 2 ) SEVERANCE CUT 19.1mm ( 3 4 ) PakMaster 75XL PLUS-CE GENUINE CUT 19.1mm ( 3 4 ) SEVERANCE CUT

More information

SURE TRIP SLT-201 SECONDARY TEST SET

SURE TRIP SLT-201 SECONDARY TEST SET 1 SURE TRIP SLT-201 SECONDARY TEST SET SURE TRIP, INC 703-A CONCORD ROAD ALBEMARLE, NORTH CAROLINA 28001 TOLL FREE: (877) 382-5864 (800) 382-5864 FAX: (905) 315-8892 (704) 983-6128 E MAIL: SURETRIP@suretrip.com

More information

Output Range See Back Page Rated Output Current/Voltage/Duty Cycle 305A DC CC/29V/100% 300A DC CV/29V/100% Number of Cylinders 2

Output Range See Back Page Rated Output Current/Voltage/Duty Cycle 305A DC CC/29V/100% 300A DC CV/29V/100% Number of Cylinders 2 Ranger 305 G ENGINE DRIVEN WELDERS Processes Stick, TIG, MIG, Flux-Cored, Gouging Product Number K1726-5 See back for complete specs Output Range See Back Page Rated Output Current/Voltage/Duty Cycle 305A

More information

Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT

Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT Plasma Cutting What is plasma cutting? Plasma is an ionized gas that is electrically conductive giving you the ability to cut most

More information

Amazing Reliability & Deliver y ALL NEW F O R M O T O R C O N T R O L S

Amazing Reliability & Deliver y ALL NEW F O R M O T O R C O N T R O L S Amazing Reliability & Deliver y ALL NEW F O R 2 0 0 7 M O T O R C O N T R O L S MOTOR CONTROL SOLUTIONS Save Time Ensure Performance Save Money! Prepackaged Control Kits from Dorner Includes all mounting

More information

MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service

MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Our sales, repair, and customer service teams received extensive training from Greenlee for the full line of products

More information

Valid for serial no. 050 xxx xxxx, 105 xxx xxxx, 347 xxx xxxx, 445 xxx xxxx, 524 xxx xxxx, 620 xxx xxxx, 640 xxx xxxx, 802 xxx xxxx

Valid for serial no. 050 xxx xxxx, 105 xxx xxxx, 347 xxx xxxx, 445 xxx xxxx, 524 xxx xxxx, 620 xxx xxxx, 640 xxx xxxx, 802 xxx xxxx Spare parts list Edition 090525 Valid for serial no. 050 xxx xxxx, 105 xxx xxxx, 347 xxx xxxx, 445 xxx xxxx, 524 xxx xxxx, 620 xxx xxxx, 640 xxx xxxx, 802 xxx xxxx The AristoTig power source is renamed:

More information

Be Ready for Anything.

Be Ready for Anything. Be Ready for Anything. COMPRESSOR GENERATOR WELDER BATTERY CHARGER BATTERY BOOSTER PTO PORT...OR BUILD YOUR OWN! MODULAR MULTIFUNCTION DIESEL DRIVE MODULAR DIESEL DRIVE DIESEL DRIVE MODULAR HOW CAN THE

More information

Build a Bug For more detailed information on any product, visit our website where you can download literature and build a bug.

Build a Bug For more detailed information on any product, visit our website where you can download literature and build a bug. Flexible Automation of Cutting & Welding Applications Flexible Automation von Schweiß- und Schneidarbeiten Automatización flexible para corte y soldadura Automatisation Flexible d applications de Soudure

More information

A compact building site upright type which has been designed according to the needs of the pipeline welder and the latest hydraulic technology.

A compact building site upright type which has been designed according to the needs of the pipeline welder and the latest hydraulic technology. PIPEWELDTRAC is a new development of the companies PPS-Pipeline Systems GmbH Services Quakenbrück GP Günter Papenburg AG, Betriebsteil Nordhausen A compact building site upright type which has been designed

More information

A1P OPERATING MANUAL

A1P OPERATING MANUAL A1P OPERATING MANUAL TABLE OF CONTENTS Introduction... p. 2 Features... p. 2 Description... p. 3 Theory of Operation... p. 3 Installation... p. 4 Electrical Connections... p. 5 Options... p. 6 Warranty...

More information

A3Z OPERATING MANUAL

A3Z OPERATING MANUAL A3Z OPERATING MANUAL TABLE OF CONTENTS Introduction... p. 2 Features... p. 2 Description... p. 3 Theory of Operation... p. 3 Installation... p. 4 Electrical Connections... p. 5 Options... p. 6 Warranty...

More information

A6Z OPERATING MANUAL

A6Z OPERATING MANUAL A6Z OPERATING MANUAL TABLE OF CONTENTS Introduction... p. 2 Features... p. 2 Description... p. 3 Theory of Operation... p. 3 Installation... p. 4 Electrical Connections... p. 5 Options... p. 6 Warranty.p.

More information