Pi18650 Li Ion Battery HAT
|
|
- Augusta Barker
- 6 years ago
- Views:
Transcription
1 Pi18650 Li Ion Battery HAT Pi18650 Li Ion Battery HAT Page 1
2 Description: The Pi18650 is an add on HAT which plugs into the 26/40 pin connector on the Raspberry Pi. This HAT allows you to operate your Raspberry Pi without a power cable and can use various capacity Lithium Ion batteries. On board is a 1A battery charging circuit for charging the battery. The Pi18650 development board also includes a 4x2 100mil header for use with a ESP8266 (ESP-01) wifi module for remote monitoring and CLOUD integration. Included is one additional stacking header for extra clearance when stacking other HAT's on top of the Pi The Pi18650 works with most 5V wall adapters with 1A rating but we recommend higher current ratings of at least 2A if it is used in UPS applications. The power adapter charges the battery while supplying power to the Pi (or SBC). The charging is cut off once the battery is full and should only be used with batteries with internal protection circuits. Removing the power adapter will cause the Pi18650 to seamlessly switch over to battery backup with no interruption. There are two jumpers, one by the positive terminal for removing all load on the battery so the battery can remain in the holder. The other jumper near the 8 pin header is used to turn off power to the Pi (or SBC). A Python script is provided to monitor the battery voltage, chip die temperature and shutdown the unit in case of low battery for proper Os shutdown. The script is written in a class so that it can be imported into other programs. How It Works: The Pi18650 holds a single cell lithium Ion form factor battery which should have an integrated battery protection circuit. The boost circuit maintains the voltage to the Pi at 5.1V for battery voltages of 3.7V to 4.2V. The jumper allows you to disable power to the Pi and Isolate the battery circuit or start the Pi. It also includes a charging IC which can charge up to 1A from the USB Micro connector and has a battery monitoring IC which communicates to the Pi via I2C.. Any DC power supply, adaptor or solar panel up to 18V max can be used with the charger. Use a good quality USB Micro cable as we found the flat style thinner cables did not work well with the charger and current was limited. The thicker round USB Micro cables work well. LED Status for the charging IC: STAT1 (ON) STAT2 (OFF) - Pre-Conditioning or Fast Charge Mode STAT2 (ON) STAT1 (OFF) - Charge Complete PWRGD (ON) - Power Is Good For Charge Pi18650 Li Ion Battery HAT Page 2
3 Features: 1A Charge Current Max Up to 2.4A for Raspberry Pi/SBC via Li-Ion Battery Up to 16V DC Input for UPS and Charging I2C Battery Monitoring (Python Script) Single Cell Lithium Ion Holder 26/40 Pin Connector for Raspberry Pi USB Micro Connector for Charging Jumper for Pi/SBC On/Off/Charge Voltage Regulation 5.1V Charge using a Solar Panel Wifi Header for ESP8266 (8 Pin Board) Use Cases: UPS (with various backup times depending on battery capacity and load) Remote battery operation Data logging Research and Development Technical Specifications: Charge Current: Operating Temperature: Charge Time: Backup/Operating Time: ROHS Compliant: Operating Input Voltage: UPS Mode: Battery Only Mode: 1A DC Per battery specifications Varies with battery capacity Varies with battery capacity Yes 5V - 18V DC Up to 1.2A for Raspberry Pi/SBC from supply Up to 2.4A for Raspberry Pi/SBC Pi18650 Li Ion Battery HAT Page 3
4 Calculating Operating Times: The Pi18650 uses form factor Li Ion batteries which come in various sizes of capacity. To calculate the run time on a battery, an example is provided below. The total current consumption or all attached peripherals to the Raspberry Pi/SBC can be measured via the jumper by the +ve battery terminal. As an example the Raspberry Pi Zero uses approximately 87mA without and 103mA with a USB dongle plugged in. With a fully charged 3000mAh battery, the Pi would last 34.5 Hrs with nothing attached and load at 87mA. Battery Capacitry / Load = Run Time 3000mAh / 103mA = 29hrs Block Diagram: USB Micro 5V - 18V DC INPUT, CHARGING CCT. 5.1V / 3.3V REGULATION, REVERSE BAT. PROTECTION CIRCUITRY BATTERY HOLDER 26/40 PIN HEADER 100mil ESP8266 HEADER Pi18650 Li Ion Battery HAT Page 4
5 Mechanical Drawing: ESP8266 Connections: On the Pi18650 there is a 2x4 Pin 100mil header to accommodate an ESP or custom module to for remote boot operations on the Pi. A device tree blob (dt-blob) file is needed to keep the output to a mosfet high while the Pi is running in order to prevent false reboots from the module. The image below depicts the connections to the header. Pi18650 Li Ion Battery HAT Page 5
6 Pi18650 Li Ion Battery HAT Page 6
Sunflower: Solar Power Manager 5V SKU: DFR0559
Sunflower: Solar Power Manager 5V SKU: DFR0559 Sunflower Solar Power Series Introduction DFRobot Sunflower is a brand new series focusing on high-efficiency micro to middle power solar energy harvesting
More informationSUPERCAPACITOR BASED ENERGY STORAGE MODULE
Product Rev. A 20. Oct 2017 SUPERCAPACITOR BASED ENERGY STORAGE MODULE FOR MICRO UPS APPLICATIONS WITH A 7V...28V INPUT Features designed for Raspberry Pi Models B+, 2, 3 >1 minute backup time including
More informationSunflower: Solar Power Manager SKU: DFR0535
Sunflower: Solar Power Manager SKU: DFR0535 Sunflower Solar Power Series Introduction DFRobot Sunflower is a brand new series focusing on high-efficiency micro to middle power solar energy harvesting and
More information1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The is a complete constant-current / constant-voltage linear charger for single cell lithium-ion batteries. Its ESOP-8 package and low external
More informationBattery Board Manual (v 1.)
Battery Board Manual (v 1.) The Raspberry Pi Battery Board was created as a compact and easy to use portable power source for the Raspberry Pi. Several ways of connecting a battery to the board have been
More informationACE4108 Max.2A Li-ion Switching Charger IC
Description The ACE4108 is a 2A Li-Ion battery switching charger intended for 12V. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More informationLipo Rider V1.3 - Lipo Pil Güç Devresi - SeeedStudio
Lipo Rider V1.3 - Lipo Pil Güç Devresi - SeeedStudio Features Jst 2.0 connector Stable 5V USB power supply regardless of source Charge/Recharge algorithms built into chip Charge Lithium Polymer Battery
More informationIntroduction. LiFePO 4 wered/pi
Introduction The LiFePO 4 wered/pi is a high performance battery power system for the Raspberry Pi. It can power a Raspberry Pi from 20 minutes to 3 hours from the battery (depending on Raspberry Pi model,
More informationMicroBOOST BOOST. Item No. 540 The smallest and lightest portable power unit on the market!
l i t h i u m ion jump sta r t e r s MicroBOOST Item No. 540 The smallest and lightest portable power unit on the market! 200 Cranking Amps/400 Peak Amps 8000mAh high capacity, high power lithium battery
More informationLX2206 Dual Level Li-Ion Battery Charger
Dual Level Li-Ion Battery Charger Manufactured by: Microsemi Corporation Integrated Product Group Garden Grove, Telephone: 714 898-8121 More than solutions enabling possibilities PRODUCT DESCRIPTION The
More information1A Single Chip Li-Ion and Li-Polymer Charger
1A Single Chip Li-Ion and Li-Polymer Charger General Description The is a complete constant-current / constant-voltage linear charger for single cell lithium-ion battery. Its TDFN-10 package and low external
More informationIntelligent DC UPS Module
Intelligent DC UPS Module 12V/9~36V DC Input, 12V DC Output Uninterruptible Power Supply Module with Diagnostics VESA or VESA mounting 9-36V input through terminal or power jack, or 12V through power jack
More informationHM5061 Max.1.6A Li-ion Switching Charger IC
Max.1.6A Li-ion Switching Charger IC DESCRIPTION The HM5061 is a 1.6A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum
More information1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The LP28012 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low
More information+Denotes lead(pb)-free and RoHS compliant. JU1 JU4 4
19-4381; Rev 0; 11/08 General Description The MAX8844Z evaluation kit (EV kit) is a fully assembled and tested PCB for evaluating the MAX8844Z/ MAX8844Y 28V linear Li+ battery chargers. The MAX8844Z EV
More informationSolar UPS Module V1. Maximum Power Point Tracking: the charger circuit
Solar UPS Module V1 The device can serve constant uninterruptible power supply (UPS) in low consumption equipment where mains power supply could not be or is difficult to be solved. Power may come from
More informationLipo Rider V1.3. The Lipo Rider can be purchased as a separate board or as a kit (Lipo Rider + Lithium Battery + Solar Panel).
Lipo Rider V1.3 Power your favourite electronic kit with green energy! The Lipo Rider board allows you ride the solar wave to run your favourite 5V device. The Lipo Rider board is the ideal green power
More informationFEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More informationBL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC
1 2 3 4 6 7 8 9 10 1 2 BG I LLHYW 3 BG LLHYW 4 6 7 8 9 10 DESCRIPTION The is a 2A Li-Ion battery switching charger intended for V adapters. Low power dissipation, an internal MOSFET and its compact package
More information2 cell Li-ion Battery Charge from 3V~12V
2 cell Li-ion Battery Charge from 3V~12V General Description The is a complete constant-current/ constant voltage switching charger for multi cell lithium-ion batteries. Boost+Linear charger work with
More informationVivid series 6700mAh Ultra Compact Power Bank TL-PBG6700
Vivid series 6700mAh Ultra Compact Power Bank TL-PBG6700 Highlights A Remarkable Ultra Compact Power Bank More Powerful, Premium LG Battery Cell High Energy Efficiency Rate Designed to Charge Fast A Beloved
More informationEnergy Shield. Features. Specifications. Min Typical Max Unit voltage V current 5 / 750 ma
Energy Shield Energy Shield is a LiPo battery based power shield that keeps your project alive. It keeps its battery charged whenever an available power source exists. It accepts a wide range of power
More informationLithium Ion Battery Charger for Solar-Powered Systems
Lithium Ion Battery Charger for Solar-Powered Systems General Description: The is a complete constant-current /constant voltage linear charger for single cell Li-ion and Li Polymer rechargeable batteries.
More informationTechcode. Features. General Description. Applications. Package Types DATASHEET
General Description Features The TD9054 is a complete constant current/constant voltage linear charger for single cell lithium ion batteries. Its SOT23 5 package and low external component count make the
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT 551A-B LITHIUM-ION BATTERY CHARGER WITH CHARGE TERMINATION
DESCRIPTION LTC4002-8.4 Demonstration circuit 551A-B is a complete constant-current/constant- voltage battery charger designed to charge a two cell Lithium-Ion Battery. Programmed for 3A charge current,
More information1A Single Chip Li-Ion and Li-Polymer Charger
1A Single Chip Li-Ion and Li-Polymer Charger General Description The LP28055 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion battery. Its ESOP8 package and low
More informationIntroduction Master your time Power-Path USB output is more than a power bank function Take care of your batteries in all aspects
Introduction As a breakthrough innovation, VC2 Plus Master is a smart charger that has countdown timer for each bay showing the time it needs to fully charge the battery. It can recognize, charge, and
More informationDesigning Applications with Lithium-Ion Batteries
Application Note Roland van Roy AN025 Sep 2014 Designing Applications with Lithium-Ion Batteries Contents 1. Introduction...1 2. Single Li-Ion Cell as Power Source...2 3. Battery Charging...6 4. Battery
More informationETA mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery APPLICATIONS ORDERING INFORMATION TYPICAL APPLICATION
800mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery DESCRIPTION is a single cell, fully integrated constant current (CC)/constant voltage (CV) Li-ion battery charger. Its compact package with
More informationBa#eries for Mobile and Emergency Power DV Hotspots. Rick Frerker January 2017
Ba#eries for Mobile and Emergency Power DV Hotspots Rick Frerker January 2017 So,.You got your DV Hotspot working all nice and cozy in your shack. But Now What? You want to use it in your car Oh Really?
More informationDynamic power path management in battery chargers: a highly integrated implementation
from ams AG Dynamic power path management in battery chargers: a highly integrated implementation By Mark Shepherd Field Applications Engineer (US), ams AG www.ams.com In portable electronic devices with
More informationEXELITE & SJS PRODUCTS
EXELITE & SJS PRODUCTS 328. SMART STARTER CHARGERS 332. LED HAND TORCHES 333. LED HEAD LIGHTS 334. LED MERCHANDISER 334. LED WORK LIGHTS & TORCHES 335. LED WORK LIGHTS 327 SMART START CHARGERS SJS01G2
More informationA4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More informationPSIM Tutorial. How to Use Lithium-Ion Battery Model
PSIM Tutorial How to Use Lithium-Ion Battery Model - 1 - www.powersimtech.com This tutorial describes how to use the lithium-ion battery model. Some of the battery parameters can be obtained from manufacturer
More informationMP V, 1A, Li-lon, Linear Battery Charger with 10mA High Voltage LDO
The Future of Analog IC Technology DESCRIPTION The MP2631 is a linear, high performance single cell Li-Ion or Li-Polymer battery charger with 1mA LDO. By integrating high voltage input protection into
More informationME4054 Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT ME4054
Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT Standalone Linear Li-Ion Battery Charger in ThinSOT -4.2V DESCRIPTION is a constant-current/constant-voltage linear charger for
More information10000mAh Mi Power Bank 2S User Manual
10000mAh Mi Power Bank 2S User Manual Product Overview Thank you for choosing 10000mAh Mi Power Bank 2S. This product is a high-capacity portable charger that uses Li-polymer battery, charge and discharge
More informationCE3211 Series. Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS:
Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: The CE3211 is a complete constant-current/ constant-voltage linear charger for single cell lithium rechargeable battery.
More informationBC-0907 SBC3001. Solar Charger
> Green Energy Charger These chargers are designed to help reduce damage to the environment. We own include our new solar charger with USB or solar charging. This unit offers economical charging by using
More informationSilvertel. Ag Features. Multi-Stage Charging. Battery Reversal Protection. Reduced Power Consumption. Wide DC or AC Input Voltage Range
Silvertel V1.1 October 2012 Pb 1 Features Multi-Stage Charging Battery Reversal Protection Reduced Power Consumption Wide DC or AC Input Voltage Range High Efficiency DC-DC Converter Programmable Charge
More information1A/800mA Standalone Linear Li-Ion Battery Charger. Features
1A/800mA Standalone Linear Li-Ion Battery Charger General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low
More informationPEAK POWER PACK. (+34) Skype
Skype bornay@bornay.com (+34) 965 560 025 PEAK POWER PACK A Li-ion battery pack with intrinsically safe LiFePO4 cells, a built-in charger and outstanding peak power performance. Peak power pack 8 Batería
More informationAdvanced Information Subject to Changes
Advanced Information Subject to Changes High Efficiency 30/60V, 100 Amps Active Management System for Lithium Ion Batteries Roboteq s is a battery management system designed for building cost-effective,
More informationEUP8075/8079. Preliminary. USB-Compliant Li-Ion Battery Charger Integrated with System Power-Path Management FEATURES DESCRIPTION APPLICATION
Preliminary EUP8075/8079 USB-Compliant Li-Ion Battery Charger Integrated with System Power-Path Management DESCRIPTION The EUP807X series of devices are highly integrated Li-ion linear chargers and system
More informationACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief
0 200 400 600 800 1000 1400 1200 5.5 FEATURES Dedicated Single Chip Solution for Mobile Power With Minimal Component Count 5V/1.5A Constant Output Current in Boost Mode 1.5A Switching Charger Programmable
More informationProduct Introduction
Product Introduction SunSumSolar Portable Solar Power Power Station Plus (SSS-PSP) 1. Solar power and UPS is the perfect combination. It s a perfect solution to a battery charging problem for digital equipment
More informationSC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications
Standalone Linear Li-Lon Battery Charger With Thermal Regulation Description The SC61A05 is a single-cell lithium-ion battery charger using a constant-current/ constant-voltage algorithm. It can deliver
More informationSoshine International. Li-ion Battery. Specification. Model: 18650USB Prepared Auditing Approved WUSUN L.XUN SILING
Li-ion Battery Specification Model: 18650USB-3.7-3000 Prepared Auditing Approved WUSUN L.XUN SILING 2018.08.28 2018.08.28 2018.08.28 1. Primary technical Parameters Type Rechargeable Lithium-ion Model
More informationTechcode. General Description. Features. Applications. Package Types DATASHEET. 1A Standalone Linear Li-lon Battery Charger with Thermal Regulation
General Description Features The is a complete constant current/constant voltage linear charger for single cell lithium ion batteries. Its SOP package and low external component count make the ideally
More informationThePiHut.com/motozero
MotoZero Mechanics Manual Motor Controller Board User Guide and Information Product Page: ThePiHut.com/motozero Guide Contents Introduction 3 Design Features 4 Kit Contents 5 Assembly 6 Motor Selection
More informationCONSONANCE CN3051A/CN3052A. 500mA USB-Compatible Lithium Ion Battery Charger. General Description: Features: Pin Assignment.
CONSONANCE 500mA USB-Compatible Lithium Ion Battery Charger CN3051A/CN3052A General Description: The CN3051A/CN3052A is a complete constant-current /constant voltage linear charger for single cell Li-ion
More informationTUTORIAL Lithium Ion Battery Model
TUTORIAL Lithium Ion Battery Model October 2016 1 This tutorial describes how to use the lithium ion battery model. Some battery model parameters can be obtained from manufacturer datasheets, while others
More information800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display
800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its SOT
More information800mA Lithium Ion Battery Linear Charger
800mA Lithium Ion Battery Linear Charger General Description is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. Furthermore the is specifically designed
More informationDT V 800mA Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7102 is a highly integrated 5V 800mA Li-ion battery linear charging management device with standby indicator output. The DT7102 charges a battery in three phases: trickle charging,
More informationVS6102 Standalone Linear Lithium Battery Charger
General Description VS6102 is a complete constant-current & constant voltage linear charger for single cell lithium-ion batteries. Its SOT-23 package and low external component count make VS6102 ideally
More informationMulti-Cell LiPo Charging
Multi-Cell LiPo Charging Created by Bill Earl Last updated on 2018-08-22 03:34:03 PM UTC Guide Contents Guide Contents Overview Products Used: Simple Balance Charger Wiring: Charging Mode: Run Mode: Fast
More information5A Synchronous Buck Li-ion Charger With Adapter Adaptive
5A Synchronous Buck Li-ion Charger With Adapter Adaptive General Description The is a 5A Li-Ion battery charger intended for 4.4~14 wall adapters. It utilizes a high efficiency synchronous buck converter
More information800mA Linear Li-Ion Battery Charger
800mA Linear Li-Ion Battery Charger General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its package and low external component
More informationLi-ion/Li Polymer Battery Charger. Features
General Description The is a highly-integrated battery charger for single-cell Li-ion or Li-polymer batteries capable of operating with an input voltage reached 2.5V. It is a complete charger device designed
More informationWSN-SLIB-PSU Rev 4.0
WSN-SLIB-PSU Rev 4.0 Solar Powered Power Supply Unit with Lithium Ion Battery Back Up. Useful for powering all kinds of outdoor electronics like wireless sensor nodes and associated sensors/actuators etc.
More informationEWT Li-Ion Battery Datasheet
Specification for ICR18650(2000mAh) 1 Scope 1.1 This Specification applies to the lithium-ion rechargeable Battery ICR18650. 1.2 This Specification shall be applied to single cell. 2 Type and Model 2.1
More informationP1110-EVAL-PS. PowerSpot RF Wireless Power Development Kit for Battery Recharging. User Manual
P1110-EVAL-PS PowerSpot RF Wireless Power Development Kit for Battery Recharging User Manual Overview The PowerSpot RF Wireless Power Development Kit for Battery Recharging is a complete demonstration
More informationCONSONANCE CN mA USB-Compatible Lithium Battery Charger. General Description: Features: Applications: Pin Assignment
CONSONANCE 500mA USB-Compatible Lithium Battery Charger CN306 General Description: The CN306 is a complete constant-current /constant voltage linear charger for single cell lithium rechargeable battery.
More informationPT1054 Lithium Ion Battery Linear Charger
GENERAL DESCRIPTION PT1054 is a complete CC/CV linear charger f or single cell lithium-ion batteries. it is specifically designed to work within USB power Specifications. No external sense resistor is
More informationPortable Li-Ion Battery Charging System Using Wind Power. Shawn Ocorr Trevor Smith Danielle Allen John VanDeLinde
Portable Li-Ion Battery Charging System Using Wind Power Shawn Ocorr Trevor Smith Danielle Allen John VanDeLinde EE EE EE ME PROJECT DESCRIPTION Design and build a portable energy system that will charge
More informationAdafruit MicroLipo and MiniLipo Battery Chargers
Adafruit MicroLipo and MiniLipo Battery Chargers Created by lady ada Last updated on 2016-10-11 06:25:10 PM UTC Guide Contents Guide Contents Overview Battery Types Plugging In USB Port Charge Indictator
More informationACE4054C. 500mA/1.5A Standalone Linear Li-Ion Battery Charge
Description The ACE4054C is a single cell, fully integrated constant current (CC)/ constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the
More informationBOOK LIGHT MUSIC STAND LIGHT USER S MANUAL
BOOK LIGHT MUSIC STAND LIGHT USER S MANUAL Version 4.0 September 2018. https://ecologicmart.com Page 1 Table of Contents Introduction... 3 How to Use the lamp... 4 Charging Process... 4 Turning On and
More informationUser Manual. User Manual IQ 328+
User Manual IQ 328+ Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. Please follow the safety and care instructions in
More informationHappy Friday! Do this now:
Happy Friday! Do this now: Take all three AA batteries out of your kit, and put (only!) two of them in the holder. (Keep the third one handy.) Take your digital multimeter out of its packaging, as well
More informationFully integrated constant current/constant voltage Li-ion battery charger
Description The ACE4054 is a single cell, fully integrated constant current (CC) / constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the
More informationS Analog/PWM Input-Charge-Current Setting S Up to 1.2MHz Switching Frequency S Programmable Charge Current Up to 4A S Monitors Input/Outputs
19-4996; Rev 0; 10/09 General Description The MAX17015 evaluation kit (EV kit) is a complete, fully assembled and tested surface-mount PCB that features the MAX17015B highly integrated, multichemistry
More informationChipLead Technology VAS A USB/Adapter Switching Charger. Features. General Description. Applications
2.5A USB/Adapter Switching Charger General Description The is a highly-integrated switch-mode battery charge management device for 1 cell Li-Ion and Li-polymer batteries in a wide range of tablet and other
More informationInstruction Manual. Integrated Solar Street Light
Instruction Manual Integrated Solar Street Light ( 5W 8W 12W 15W ) ( 20W 25W 30W 40W 50W 60W 70W 80W ) Brief: Our integrated solar street light which integrates the green-energy parts solar panel, lamp
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT DC1259A BATTERY BACKUP MANAGER BOARD
DESCRIPTION Demonstration circuit DC1259A is a single-battery battery-backup controller featuring the LTC4110. The LTC4110 controller provides all the features and functions to offer a complete standalone
More informationLM3621 Single Cell Lithium-Ion Battery Charger Controller
Single Cell Lithium-Ion Battery Charger Controller General Description The is a full function constant voltage, constant current (CVCC) lithium-ion (Li+) battery charger controller. It provides 1% regulation
More informationAAT3683 PRODUCT DATASHEET. 1A Linear Li-Ion Battery Charger. Features. General Description. Applications. Typical Application
General Description The BatteryManager is a highly integrated single-cell lithium-ion / polymer (Li-Ion) battery charger that operates from a USB port or an AC adapter input up to an input voltage of 7.5V.
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1061A LINEAR LI-ION BATTERY CHARGER WITH DUAL SYNCHRONOUS BUCK REGULATOR
Demonstration circuit 1061A is a complete single cell Lithium-Ion battery charger and two synchronous buck voltage regulators with adjustable output voltages. Operating at a frequency of 2.25MHz, the regulators
More information500mA Linear Li-Ion Battery Charger in SOT23
500mA Linear Li-Ion Battery Charger in SOT23 General Description The is a standalone linear Li-ion battery charger with exposed pad SOT23 package. With few external components, is well suited for a wide
More informationInstruction Manual PathLight Solar Street & Parking Lot Light (20W 25W 30W)
Instruction Manual PathLight Solar Street & Parking Lot Light (20W 25W 30W) Overview: Our PathLight solar street light which integrates the efficient solar panel, LED light and the Li-Fe battery into a
More informationDT V 1A Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7115 is a highly integrated 5V 1A Li-ion battery linear charging management device. The DT7115 charges a battery in three phases: trickle charging, constant current, and constant
More informationUser Manual IQ338. We thank you that you have decided to purchase our intelligent charger.
User Manual IQ338 Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. 9 120004 642783 Please follow the safety and care instructions
More informationUSER MANUAL. OMEGA 453 Portable Generator
USER MANUAL OMEGA 453 Portable Generator INTRO Thank you for choosing the OMEGA Series Clean Energy Generator, the trusted companion for all your travels and adventures both on and off the grid. TABLE
More informationL, LTC, LTM, LT, Burst Mode, OPTI-LOOP, Over-The-Top and PolyPhase are registered
DEMO CIRCUIT 1568A QUICK START LT3652EDD GUIDE DESCRIPTION Demonstration Circuit 1568A is a 2A Monolithic Multi- Chemistry battery charger for solar power applications featuring the LT3652EDD. The LT3652
More informationST3S01PHD BATTERY CHARGE I.C.
BATTERY CHARGE I.C. DEDICATED I.C. FOR 1 LI-ION CELL OR 3 NI-MH CELLS 5 DIFFERENT OPERATING MODES 150 ma PRECHARGE CURRENT VERY LOW DROP CHARGE SWITCH (130mV @ 800mA) VERY LOW DROP REVERSE SWITCH (130mV
More informationMCP Stand-Alone System Load Sharing and Li-Ion / Li-Polymer Battery Charge Management Controller. Features. Applications.
Stand-Alone System Load Sharing and Li-Ion / Li-Polymer Battery Charge Management Controller Features Integrated System Load Sharing and Battery Charge Management - Simultaneously Power the System and
More informationMobile Communications Product Guide
Mobile Communications Product Guide Part Number Description Package(s) Available (Lead-free) Page No. LED Backlight Controller ICs for Small-Size LCD Panels OZ521 Boost Converter Controller 8 E-SOP, SOP
More informationLi-ion Battery Specification
Li-ion Battery Specification Model Number: LP 103450 3.7V 1800mAh Prepared By Verified By Approved By 8-1 Amendment Records Revision Description Issued Date Approved By A0 New release 2012-02-15 8-2 Contents
More information800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery
800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion
More information+Denotes lead(pb)-free and RoHS compliant
9-44; Rev ; 0/0 MAX890A Evaluation Kit General Description The MAX890A evaluation kit (EV kit) is a fully assembled and tested circuit board for evaluating the A, -cell Li+ DC-DC battery charger. The EV
More information+Denotes lead-free and RoHS compliant.
9-0; Rev 0; 0/07 MAX866 Evaluation Kit General Description The MAX866 evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX866 power-management IC. The MAX866 integrates
More informationPRODUCT DATASHEET AAT3681
General Description The BatteryManager is an integrated single cell lithium-ion/polymer battery charger IC, designed to operate from a DC power source or USB port up to an input voltage of 7.5V. It requires
More informationRT9525. Linear Single Cell Li-Ion Battery Charger with Auto Power Path. General Description. Features. Applications. Ordering Information
RT9525 Linear Single Cell Li-Ion Battery Charger with Auto Power Path General Description The RT9525 is an integrated single cell Li-ion battery charger with Auto Power Path Management (APPM). No external
More informationDIO5538B 5~100mA,Single Li-ion Battery Charger
5~100mA,Single Li-ion Battery Charger Rev 1.1 Features Broad Programmable Charging Current: 5~100mA Over-Temperature Protection Under Voltage Lockout Protection Reverse current protection between BAT and
More information2A Synchronous Buck Li-ion Charger
2A Synchronous Buck Li-ion Charger General Description The is a 5A Li-Ion battery charger intended for 4.4V~14V wall adapters. It utilizes a high efficiency synchronous buck converter topology to reduce
More informationSoldering Pi2Go Lite. Soldering the Line-Follower PCB
Soldering Pi2Go Lite First check which version of the main PCB you have. It is marked above the left motor "Pi2Go-Lite v1.x". There are minor changes to some parts of the build. v1.0 (initial release)
More informationStandalone Linear Li-Ion Battery Charger with Thermal Regulation
HM4056 Standalone Linear Li-Ion Battery Charger with Thermal Regulation FEATURES DESCRIPTION Programmable Charge Current up to 1A No MOSFET, Sense Resistor or Blocking Diode Required Constant-Current/Constant-Voltage
More informationRECHARGEABLE LITHIUM COIN CELLS
RECHARGEABLE LITHIUM COIN CELLS STANDARD SPECIFICATIONS ICR IFR Nominal voltage / Chemical system Nominal capacity range Storage temperature Voltage Current normal Temperature at charging DISCHARGE CHARACTERISTICS
More informationCOTAG GENERAL DESCRIPTION
GENERAL DESCRIPTION The YF8036 is a highly integrated Li-ion battery linear charging management device targeted at space limited portable applications. The YF8036 offers an integrated MOSFET and current
More information