»Welcome to the International Biax Users Conference«
|
|
|
- Bonnie Jefferson
- 6 years ago
- Views:
Transcription
1 UC12 Fraunhofer LBF»Welcome to the International Biax Users Conference«Darmstadt November 11, 2015 Ruediger Heim Director R&D Division»Structural Durability«Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF
2 UC12 Fraunhofer LBF
3 Fraunhofer LBF: R&D Campus»North«Location: Darmstadt close to Frankfurt International airport No. of employees: approx. 540 (incl. TUD) R&D budget: approx. EUR 30 Mio.
4 Technology & application areas Fraunhofer LBF Vibration & acoustics Polymers Lightweight Reliability
![sound pressure [db(a) re 20 Pa] Technology & application: vibration & acoustics Vibration & acoustics Polymers 75 70 65 Sound](/docs-images/74/70813048/images/5-0.jpg "pressure db(a) Serial mount Active mount - uncontrolled Active mount - controlled (mounting point acc) 60 55 50 45 40 35 2000")
5 sound pressure [db(a) re 20 Pa] Technology & application: vibration & acoustics Vibration & acoustics Polymers Sound pressure db(a) Serial mount Active mount - uncontrolled Active mount - controlled (mounting point acc) rpm 1/min Semi-active engine mount to reduce structural borne noise in compartment Broad band mount using piezo-actuation system for vibration control System analysis & development, prototyping and vehicle integration Lightweight Reliability
6 Technology & application: polymers Vibration & acoustics Polymers Dual-Cure adhesives w/ variable Young s modulus Kationic UVinitiated epoxy hardening Aminic epoxy hardening Lightweight Reliability
7 Technology & application: reliability Vibration & acoustics Polymers Full vehicle road simulator (25 channel) Service load simulation w/ drivefiles from proving grounds Integration of active chassis components Lightweight Reliability
8 Technology & application: lightweight Vibration & acoustics Polymers CFRP passenger car wheel w/ inwheel motor Material selection and characterisation Composite layer optimisation and build (RTM) CAE and lab tests (ZWARP) Lightweight Reliability
9 UC12 Lightweighting
10 Advanced wheel products for passenger cars Passenger car wheels have mass about kg ( size) Typically wheels using medium strength steels and flow forming processes, or aluminum casting or forging Utilizing fibre-reinforced plastics for mass reduction & product differentiation polymer hybrid Al wheel disc CfrP wheel well Polymer wheel structure SMC Polymer wheel structure CfrP
11 Lightweight potential of different material systems
12 UC12 Wheel fatigue incidents
13 Main landing gear wheel failure involving a Boeing 737 On 10 June 2014, a Boeing 737 aircraft landed at Sydney Airport. During taxiing, the crew felt a slight shuddering from around the main landing gear. After parking the aircraft, an examination confirmed that the inboard wheel half-hub had fractured into several pieces. The wheel hub consisted of an inboard and outboard section. It was likely that the fatigue crack initiated in the stressconcentrated, transition region between the bearing bore wall and the circumferential radius Source: ATSB Aviation Safety Occurence Investigation June 2015
14 MY 2014 Ford Edge wheel rim failures May 2015 The NHTSA said it is investigating 20, Ford Edge SUVs for aluminum wheel rim failures. In November, NHTSA received a complaint of a sudden failure of a 22-inch alloy wheel rim 2014 Ford Edge with 8,500 miles on it from an incident in Dickerson, Maryland. There were no injuries in the incident. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle, NHTSA said. Picture: Ford Motor Company
15 UC12 Recent LBF projects
16 Airflow optimized wheel disc design for in-wheel motor Vehicle subsystem test at university wind channel
17 Wheel/hub durability of automated people mover vehicle Methodology transfer to railway certification process Picture: Bombardier Transportation
18 Biax technology integration program Complete technology integration & implementation at customer s site Customer s scope & requirements review Technology integration proposal & offering Test rig hardware built Technology implementation, load file development & users training
19 Accelerated testing representing operational signatures Relevant road load data RLD: time histories RLD: spectra LBF design spectra representing total vehicle operation Design spectra representing individual operational signatures LBF test spectra for biax accelerated life testing
Requirements regarding Fatigue Tests of a Composite Wheel with Integrated Hub Motor
Requirements regarding Fatigue Tests of a Composite Wheel with Integrated Hub Motor Functional and Innovative Lightweight Concepts and Materials for HEVs Switzerland, Oct. 09th-10th 2014 HEV 2014 Fraunhofer
Fibre-Reinforced-Plastic (FRP) Wheel Developing and Testing at LBF
Fibre-Reinforced-Plastic (FRP) Wheel Developing and Testing at LBF UC13 - November 8th 2017 at Fraunhofer LBF; Darmstadt 0031 Andreas Büter Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit
Runflat tire and it s impact on BiAx Testing
13 th Users Conference on BiAxial Fatigue Testing November 08 th, 2017 Runflat tire and it s impact on BiAx Testing Dipl. Ing. Said Allouch Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit
Dipl. Ing. Ivo Krause Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF
13 th Users Conference on BiAxial Fatigue Testing November 08 th, 2017 Dipl. Ing. Ivo Krause Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF www.lbf.fraunhofer.de AGENDA BRK Updates
The ENLIGHT Project. Enhanced Lightweight Design. Introduction of project rationale, approach and scope SCP2-GA
The ENLIGHT Project Enhanced Lightweight Design SCP2-GA-2012-314567 Introduction of project rationale, approach and scope ENLIGHT 2012 Slide No. 1 General Information Project full title: Enhanced Lightweight
BIAXIAL FATIGUE TEST FOR TRUCK WHEELS
EUWA STANDARDS June 2017 BIAXIAL FATIGUE TEST FOR TRUCK WHEELS ZWEIAXIALE PRÜFUNG FÜR LKW-RÄDER Essai biaxial pour roues poids lourd E S 3.23 Page 1/8 Changes: 10/2006 First release 10/2013 Rev. 1 - Multi
NOVEL LIGHTWEIGHT SOLUTIONS FOR HIGHLY LOADED POWER TRANSMISSION COMPONENTS
NOVEL LIGHTWEIGHT SOLUTIONS FOR HIGHLY LOADED POWER TRANSMISSION COMPONENTS WERNER HUFENBACH, OLAF HELMS, DANIEL WOHLFAHRT, THOMAS RITSCHEL, 01062 Dresden, Germany BURKHARD IFFLAND ZF Luftfahrttechnik
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
UC th Users Conference on BiAxial Fatigue Testing November 11 th, 2015
UC 12 12 th Users Conference on BiAxial Fatigue Testing November 11 th, 2015 Dipl. Ing. Ivo Krause Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF www.lbf.fraunhofer.de MOTIVATION
How to industrialize CFRPs? Challenges and opportunities
How to industrialize CFRPs? Challenges and opportunities 11th International Carbon Festival October 05-07, 2016 David Weinberg, Voith Composites GmbH & Co. KG 1 Agenda Voith Composites CFRPs: Challenges
Introduction of Voith Composites. Meet the Future of Carbon Fiber Composites. Germany, July voith.com. Garching, June 27, 2018
voith.com Introduction of Voith Composites Germany, July 2018 Garching, June 27, 2018 Meet the Future of Carbon Fiber Composites Voith Composites Germany July 2018 1 Voith Group One of the Biggest Family
Cars, The high measuring accuracy of the precision load cells is retained during transmission, since digitization takes place on the wheel to
Force SUNSTAR 传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 E-MAIL: RoaDyn S630 sp Wheel Force Transducer (WFT) for Passenger Cars Wheel force transducer for measuring three forces and three moments
AUTOMOTIVE ALUMINUM GROWTH SURGE : ALUMINUM CONTENT IN NORTH AMERICAN LIGHT VEHICLES
AUTOMOTIVE ALUMINUM GROWTH SURGE 2016-2028: ALUMINUM CONTENT IN NORTH AMERICAN LIGHT VEHICLES STUDY CONDUCTED BY ALUMINUM ASSOCIATION ALUMINUM TRANSPORTATION GROUP (ATG) 2 PRESENTERS Doug Richman Technical
Dr Mark White Chief Engineer, Body Complete, Jaguar Land Rover Product Development
Right Material for the Right Part Identify Cost Effective Routes To Achieving Scalable Solutions For Mass-Market Product - Optimal Multi-Material Combinations Including Aluminium, Magnesium & Composites
High Volume Automotive Applications Addressed by the Braiding Technology
High Volume Automotive Applications Addressed by the Braiding Technology JEC World Conference 2017 Dr. Andreas Erber Paris March, 2017 DC0 Öffentlich - (erberan) Business Unit Composites Fibers and Materials
EA Closing Report Page 1 of 9
EA06-002 Closing Report Page 1 of 9 SUBJECT: Rear coil spring fracture ENGINEERING ANALYSIS CLOSING REPORT EA No: EA06-002 DATE OPENED: 24-Jan-2006 DATE CLOSED: 05-Feb-2007 SUBJECT VEHICLES: Model Year
Hybrid Materials and Construction Principles for Aero Engine Components. Materials 2006
Hybrid Materials and Construction Principles for Aero Engine Components Materials Day@ILA 2006 Frank Kocian,, Joachim Hausmann DLR German Aerospace Center Folie 1 BDLI 2006 Kocian 17.05.2006 Content Hybrid
ANZSASI 2000 CHRISTCHURCH ENGINEERING ANALYSIS. Vlas Otevrel
ENGINEERING ANALYSIS Vlas Otevrel 1 Garrett TPE 331 engine turbine failure The engine was fitted to a Metro II aircraft engaged in a freight run. Just after the top of descent, some 20 nm from destination,
Fraunhofer AutoMOBILE Production Alliance. Innovative Production Technologies for new car concepts Dipl.-Ing. F.-J.
Fraunhofer AutoMOBILE Production Alliance Innovative Production Technologies for new car concepts Dipl.-Ing. F.-J. Woestmann, IFAM www.automobil.fraunhofer.de Agenda Fraunhofer Allianz Automobilproduction
REPORT IN-012/2011 DATA SUMMARY
REPORT IN-012/2011 DATA SUMMARY LOCATION Date and time Site Monday, 11 April 2011; 14:00 local time Mijares (Ávila, Spain) AIRCRAFT Registration Type and model Operator SP-SUH PZL W-3A, PZL W-3AS LPU Heliseco
Aerospace and Automotive Manufacturing Specific Differences and Trends
Engineering, Test & Technology Aerospace and Automotive Manufacturing Specific Differences and Trends Phil Crothers, PhD Enterprise Domain Leader Manufacturing Boeing Engineering, Test & Technology Author,
Presentation: The Automotive Market & Composite Material Outlook Presented by: Marc Benevento, Industrial Market Insight
Presentation: The Automotive Market & Composite Material Outlook Presented by: Marc Benevento, Industrial Market Insight 2015 Industrial Market Insight LLC. All Rights Reserved. Outline Ground Transportation
OPPORTUNITY AND CHALLENGES FOR AUTOMOTIVE COMPOSITE APPLICATIONS
OPPORTUNITY AND CHALLENGES FOR AUTOMOTIVE COMPOSITE APPLICATIONS Dr. Hendrik Mainka Engineering & Planning Center - Innovations 1 Volkswagen Group : 12 brands > 335 models 2 Key Figures of the Volkswagen
July 10, Alan Mulally, President & CEO Ford Motor Company The American Road Dearborn MI Dear Mr. Mulally:
July 10, 2012 Alan Mulally, President & CEO Ford Motor Company The American Road Dearborn MI 48121-1899 Dear Mr. Mulally: The Center for Auto Safety (CAS) doesn t often write the CEO s of major auto companies
Panoramic Sunroof Issue
Informal document GRSG-107-22, (107th GRSG, 30. Sept.-3 Oct., 2014 agenda item 5) Panoramic Sunroof Issue OICA/CLEPA-comment on the national defect investigation and the proposed amendments to toughened
Fraunhofer Institute for Structural Durability and System Reliability LBF. Fraunhofer LBF
Fraunhofer Institute for Structural Durability and System Reliability LBF Fraunhofer LBF Fraunhofer LBF History 1938 Foundation as Laboratorium für Betriebsfestigkeit LBF 1962 Affiliation to Fraunhofer-Society
Summary briefing on four major new mass-reduction assessment for light-duty vehicles
Summary briefing on four major new mass-reduction assessment for light-duty vehicles In 2010-2012, in the development of US passenger vehicle standards for model years 2017-2025, there were many questions
Redesign and Analysis of Automobile Wheel Rim #1 Pandit Shailesh, #2 Gajjal Shekhar
ISSN 2395-1621 Redesign and Analysis of Automobile Wheel Rim #1 Pandit Shailesh, #2 Gajjal Shekhar 1 shailesh27290@gmail.com 2 shekhar.gajjal@sinhgad.edu #1234 Department of Mechanical Engineering,SavitribaiPhule
Design And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions
Design And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions Tejas Mulay 1, Harish Sonawane 1, Prof. P. Baskar 2 1 M. Tech. (Automotive Engineering) students, SMBS, VIT University, Vellore,
3 rd European Hyperworks Technology Conference. Application of Results from CFD-Simulations on a Race Car
3 rd European Hyperworks Technology Conference Application of Results from CFD-Simulations on a Race Car Ludwigsburg, November 3 rd 2009 Dipl.-Ing. René Henn, Dipl.-Ing. Leif Ickert Institut für Kraftfahrzeuge
THE LONGITUDINAL VIBRATION OF COMPOSITE DRIVE SHAFT
THE LONGITUDINAL VIBRATION OF COMPOSITE DRIVE SHAFT Tongtong Zhang, Yongsheng Li, Weibo Wang National Key Laboratory on Ship Vibration and Noise, China Ship Scientific Research Centre, Wuxi, China email:
Social innovation and light electric vehicle revolution on streets and ambient
Social innovation and light electric vehicle revolution on streets and ambient 25 th Apr. 2018 RESOLVE Final Event Chaussée de Wavre 950-1040 Bruxelles Riccardo Groppo Contents The SilverStream project
High performance and low CO 2 from a Flybrid mechanical kinetic energy recovery system
High performance and low CO 2 from a Flybrid mechanical kinetic energy recovery system A J Deakin Torotrak Group PLC. UK Abstract Development of the Flybrid Kinetic Energy Recovery System (KERS) has been
From Idea to Product Casting Technology and Component Development at the Fraunhofer IFAM
From Idea to Product Casting Technology and Component Development at the Fraunhofer IFAM ROADSHOW 2012 LIGHTWEIGHT TECHNOLOGY Christoph Pille, Felix Horch Agenda Fraunhofer-Gesellschaft & Fraunhofer IFAM
When Poor Aircraft Maintenance Costs Lives Ms Cathy Teague Manager: Airworthiness Company: South African Civil Aviation Authority
When Poor Aircraft Maintenance Costs Lives Ms Cathy Teague Manager: Airworthiness Company: South African Civil Aviation Authority WHEN POOR AIRCRAFT MAINTENANCE COSTS LIVES AGENDA Human Error in Aircraft
INNOVATION POWERING SAFRAN
INNOVATION POWERING SAFRAN Stéphane CUEILLE, Chief Technology Officer 106 Safran - Capital Markets Day / November 29, Technology, key to our competitiveness R&T plan BUSINESSES PROPULSION EQUIPMENT INTERIORS
Leaf springs Design, calculation and testing requirements
Leaf springs Design, calculation and testing requirements S. Karditsas, G. Savaidis, A. Mihailidis Aristotle University of Thessaloniki Thessaloniki, Greece A. Savaidis School of Pedagogical and Technological
With system integration and lightweight design to highest energy densities
With system integration and lightweight design to highest energy densities AMAA 18.06.2013, Berlin Dipl.-Ing. and Dipl.-Phys. Klaus Höhne Fraunhofer Institute for Structural Durability and System Reliability
POWER MEASUREMENT AND ROAD LOAD DATA ACQUISITION FOR SPEED EPACS
POWER MEASUREMENT AND ROAD LOAD DATA ACQUISITION FOR SPEED EPACS Investigation regarding vehicle structure integrity for cycles designed to pedal of vehicle category L1e-B and ratio of auxiliary propulsion
Virtual Product Development (VPD) deployed on Durability
IAR FENet 2003 4-5 December 2003 Virtual Product Development (VPD) deployed on Durability Christoph Ortmann Business Development Director Agenda Introductions VPD Overview VPD Durability: The Honda ATV
Passenger Vehicle Interior Noise Reduction by Laminated Side Glass. Abstract
The 22 International Congress and Exposition on Noise Control Engineering Dearborn, MI, USA. August 19-21, 22 Passenger Vehicle Interior Noise Reduction by Laminated Side Glass Jun Lu Solutia Inc. 73 Worcester
FINAL REPORT HCLJ
FINAL REPORT HCLJ510-2012-86 Serious incident Type of aircraft: Boeing MD-82 Registration: SE-DIL Engines: 2 P&W JT8D-217C Type of flight: Scheduled passenger, IFR Crew: 5 - no injuries Passengers: 130
Dynamic Load Analysis and Optimization of a Fracture-Split Connecting Rod
Dynamic Load Analysis and Optimization of a Fracture-Split Connecting Rod Dipak Sarmah, Athar M Khan and Anirudh Jaipuria Ashok Leyland Ltd. India. Abstract: This paper summarizes the methodology to design
Pultruded carbon fibre plates for structural strengthening as part of a Sika CarboDur system
Product Data Sheet Edition 31/03/2011 Identification no: 02 04 01 01 001 Sika CarboDur S Pultruded carbon fibre plates for structural strengthening as part of a Sika CarboDur system Construction System
Apparent fuel leak, Boeing , G-YMME
Apparent fuel leak, Boeing 777-236, G-YMME Micro-summary: This Boeing 777-236 experienced an apparent fuel leak, prompting a diversion. Event Date: 2004-06-10 at 1907 UTC Investigative Body: Aircraft Accident
A Revolutionary Weight-Reducing System for Aircraft & High-Speed Train Interiors
IN COOPERATION WITH A Revolutionary Weight-Reducing System for Aircraft & High-Speed Train Interiors 1 Table of contents (1) Welcome & Introduction (2) SMTC and its approach to this innovative and revolutionary
Boeing , G-CIVX. None N/A. N/A hours Last 90 days - N/A hours Last 28 days - N/A hours. AAIB Field Investigation
INCIDENT Aircraft Type and Registration: No & Type of Engines: Boeing 747-436, G-CIVX 4 x Rolls-Royce RB211-524G2 turbine engines Year of Manufacture: 1998 (Serial no: 28852) Date & Time (UTC): Location:
SURFACE VEHICLE RECOMMENDED PRACTICE
SURFACE VEHICLE RECOMMENDED PRACTICE J1095 Issued 1982-06 Revised 2003-03 REV. MAR2003 Superseding J1095 MAR1995 Spoke Wheels and Hub Fatigue Test Procedures 1. Scope This SAE Recommended Practice provides
CONCEPTUAL CAR DESIGN AT BMW WITH FOCUS ON NVH PERFORMANCE
CONCEPTUAL CAR DESIGN AT BMW WITH FOCUS ON NVH PERFORMANCE Dr. Manfred Kroiss (IABG) Dr. Luc Cremers (BMW Group) Dipl.-Ing. Vasilis Evangelou (BETA CAE Systems SA) 5th ANSA & µeta International Conference
TURKISH WIND ENERGY CONGRESS Innovative Blade Design. Istanbul November 2012
TURKISH WIND ENERGY CONGRESS 2012 Innovative Blade Design Istanbul November 2012 ROTOR BLADES MADE BY NORDEX Rotor blade is a key component of a wind turbine main driver for energy production main driver
Evaluation of Vibrostrengthening for Fatigue Enhancement of Titanium Structural Components on Commercial Aircraft
Evaluation of Vibrostrengthening for Fatigue Enhancement of Titanium Structural Components on Commercial Aircraft D. H. Gane 1, Y. S. Rumyantsev 2, H. T. Diep 1, L. Bakow 1 1 Boeing Commercial Aircraft
BASF s Performance Polymers Delivering sustainable value
BASF s Delivering sustainable value Wolfgang Hapke President Performance Polymers Division September 5, 2012 A strategic fit for BASF BASF Group sales 2011 Oil & Gas 16% Other 9% Chemicals 18% Agricultural
DOE OVT Energy Storage R&D Overview
DOE OVT Energy Storage R&D Overview David Howell Hybrid and electric vehicles, energy storage technologies and control systems National and international R&D-projects, research institutions and funding
FLAVA Flexible Lightweight Architecture for Volume Applications. James Williams, Program Manager
FLAVA Flexible Lightweight Architecture for Volume Applications James Williams, Program Manager 1 Company Overview Strategic Business Units Consulting Composite Technologies Special Operations Accreditation
Epoxy Resin L Unit Value
Technical data Epoxy Resin L + Hardener S, L, CL, EPH 500, W 300, GL 1, GL 2, EPH 573 and EPH 161 Low viscosity, free of solvents and fillers Fast impregnation of glass, aramid, and carbon fibres High
BEYOND TEARDOWN - AVL SERIES BATTERY BENCHMARKING
BEYOND TEARDOWN - AVL SERIES BATTERY BENCHMARKING Getting from low level parameter to target orientation Dr. Wenzel Prochazka AVL List GmbH (Headquarters) CONTENTS OVERVIEW 1. AVL Introduction Focus Series
Adress: Anadolu OSB 4/A, Ankara Phone: Fax: Web: Mail:
Adress: Anadolu OSB 4/A, Ankara Phone: +90 312 354 40 99 Fax: +90 312 354 40 93 Web: www.gesmuhendislik.com Mail: info@gesmuhendislik.com GES Engineering founded in 2013 in Ankara OSTİM Organized Industry.
Singapore Airlines Flight 368 Engine Fire. Ng Junsheng Head (Technical)/Senior Air Safety Investigation Transport Safety Investigation Bureau
Singapore Airlines Flight 368 Engine Fire Ng Junsheng Head (Technical)/Senior Air Safety Investigation Transport Safety Investigation Bureau 3 rd Annual Singapore Aviation Safety Seminar 29 March 2017
About Steel Market Development Institute
About Steel Market Development Institute A business unit of the American Iron and Steel Institute SMDI s Automotive Market program is led by the Automotive Applications Council (AAC) with the member companies
SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 *
SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 * PRODUCT: Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
New Material Technologies using Physics A Combination of Acoustic and Thermal Systems Hartmut Kiessig 6.Jun.2011
New Material Technologies using Physics A Combination of Acoustic and Thermal Systems Hartmut Kiessig 6.Jun.2011 Overview on Technologies May 2011 Hartmut Kiessig, R+T BG SAMEA 1 New Material Technologies
Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA)
Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA) G. S. Choi and H. K. Min Kia Motors Technical Center 3-61 INTRODUCTION The reason manufacturers invest their time
Crashworthiness of an Electric Prototype Vehicle Series
Crashworthiness of an Electric Prototype Vehicle Series Schluckspecht Project Collaboration for Crashworthiness F. Huberth *, S. Sinz *+, S. Herb *+, J. Lienhard *+, M. Jung *, K. Thoma *, K. Hochberg
The new 911 GT3 R. Challenger.
The new 911 GT3 R Challenger. Unstoppable. Only those who accept the challenge will unleash his strength. Only those who unleash his strength will conquer the race track. One thing is certain, you can
Simulation and Design Optimization of Al Alloy Wheels Subjected to Biaxial Fatigue Loading. Ali KARA, Ph.D. Barış KÜSÜLÜ
Simulation and Design Optimization of Al Alloy Wheels Subjected to Biaxial Fatigue Loading Ali KARA, Ph.D. Barış KÜSÜLÜ Contents Company Profile Introduction Biaxial Testing Simulation with LBF.WHEELSTRENGTH
ADVANCED STEEL OFFERS AUTOMAKERS AGGRESSIVE ENGINE DOWNSIZING
ADVANCED STEEL OFFERS AUTOMAKERS AGGRESSIVE ENGINE DOWNSIZING Andy Schmitter Nucor Corporation Background and Scope The Bar Applications Group (BAG),a committee of the Steel Market Development Institute
Development of an actively controlled, acoustically optimised single arm pantograph
Development of an actively controlled, acoustically optimised single arm pantograph Authors Dr. Wilhelm Baldauf 1), Rene Blaschko 2), Dr. Wolfgang Behr 1), Dr. Christoph Heine 1), Michael Kolbe 1) 1) Deutsche
Chassis Technology Workshop Cayenne
Chassis Technology Workshop Cayenne Driving dynamic properties of all Porsche models Optimum driving dynamics and steering precision from high-performance chassis, steering and all-wheel drive systems
NVH CAE concept modeling and optimization at BMW.
06.06.2011 Page 1 VECOM Suppliers Workshop: Vehicle Concept Modeling in the Automotive Sector. NVH CAE concept modeling and optimization at BMW. 06.06.2011 VLEVA, Brussels Page 2 NVH CAE concept modeling
An automotive perspective on the use of carbon fibres
An automotive perspective on the use of carbon fibres Dr. Armin Plath I Dr. Olaf Täger I Timo Niederstadt I Materials and Manufacturing Processes 13.06.2012 The Challenge of CO 2 -Reduction 2 Opportunities
IJESRT. Scientific Journal Impact Factor: (ISRA), Impact Factor: METHODOLOGY Design Parameter [250]
![IJESRT. Scientific Journal Impact Factor: (ISRA), Impact Factor: METHODOLOGY Design Parameter [250]](/thumbs/93/112194125.jpg "IJESRT. Scientific Journal Impact Factor: (ISRA), Impact Factor: METHODOLOGY Design Parameter [250]")
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY DESIGN AND ANALYSIS OF COMPOSITE LEAF SPRING FOR LIGHT COMMERCIAL VEHICLE (TATA ACE) Miss. Gulshad Karim Pathan*, Prof. R.K.Kawade,
HYBRID COMPOSITE DOOR BEAM FOR MASS PRODUCTION
HYBRID COMPOSITE DOOR BEAM FOR MASS PRODUCTION Design, Analysis, Optimisation, Testing, Productionisation 2017 by Plasan 1 ABOUT MYSELF NIR KAHN Coventry University Transport Design Graduate Chief Designer
Derailments and Derailment Prevention
Derailments and Derailment Prevention Dr. Allan M Zarembski Professor and Director Railroad Engineering and Safety Program University of Delaware dramz@udel.edu 2015 Allan M Zarembski Railroad Safety and
Virtual Durability Simulation for Chassis of Commercial vehicle
Virtual Durability Simulation for Chassis of Commercial vehicle Mahendra A Petale M E (Mechanical Engineering) G S Moze College of Engineering Balewadi Pune -4111025 Prof. Manoj J Sature Asst. Professor
Construction. Pultruded Carbon Fibre Plates for Structural Strengthening As Part of a Sika CarboDur System. System Description
Construction Product Data Sheet Edition: 23/12/2014 Identification no: 02 04 02 01 001 Version : GCC Sika CarboDur S Sika CarboDur S Pultruded Carbon Fibre Plates for Structural Strengthening As Part of
Project description Environmental issues Beneficiaries Administrative data
Flywheel energy storage - Construction of a demonstration flywheel energy-storage systems for the reduction of the energy-consumption in public light-rail systems by up to 10% LIFE97 ENV/D/000474 Project
ENGINEERING CAPABILITIES
GES Engineering is founded in 2013 in Ankara OSTİM Organized Industry. It is active in Aerospace and Defense Industry with precision mechanical production, design and assembly. To satisfy customer needs
STATIC AND FATIGUE ANALYSIS OF LEAF SPRING-AS A REVIEW
STATIC AND FATIGUE ANALYSIS OF LEAF SPRING-AS A REVIEW Vishal Gavali 1, Mahesh Jadhav 2, Digambar Zoman 3 1,2, 3 Mechanical Engineering Department, LGNSCOE Anjaneri Nashik,(India) ABSTRACT In engineering
FP 6. EU Proposal SALMAPS
1 FP 6 EU Proposal SALMAPS Safety Safety Assessment and and Lifetime Management of of Piping Piping Systems by byklaus Kerkhof, Kerkhof, MPA MPA Stuttgart Stuttgart Core Partners: VCE, VCE, Vienna MPA,
Kolbenschmidt Pierburg Group
Kolbenschmidt Pierburg Group KS Aluminum Pistons for Truck Applications Requirements The development of on- and off-highway diesel engines for a wide spectrum of applications is affected by global emission
477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength
3M 477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength Principal Investigator: Dr. Kamal Amin Reviewed by: Dr. Colin McCullough Date of Report: June 1, 2003
Plastics & Composites Solutions for the Tesla Roadster
1 Plastics & Composites Solutions for the Tesla Roadster Barrie Dickinson, Tesla Motors September 15, 2009 2 - Overview Tesla Motors Electric Performance Our Industry Leading EV Powertrain Drive Towards
2018 Vintage Car Rules
2018 Vintage Car Rules Minimum age of Legends drivers shall be 13. All drivers under the age of 18 must have a copy of birth certificate or driver s license and signed waiver by both parents before racing.
Bombardier Q300 nose landing gear incidents
Bombardier Q300 nose landing gear incidents Peter R. Williams Transport Accident Investigation Commission ANZSASI Regional Air Safety Seminar Christchurch, June 2013 September 2010 Flight WLG NSN, wx divert
Aachen Colloquium China Determination of the Functional Performance of a Series Electric Vehicle. Beijing, November 1 st - 2 nd, 2011
Aachen Colloquium China 2011 Determination of the Functional Performance of a Series Electric Vehicle Beijing, November 1 st - 2 nd, 2011 Lutz Eckstein Roland Wohlecker René Göbbels Forschungsgesellschaft
DINAN E63/64 6 Series
DINAN E63/64 6 Series 2004-2008 Dinan Signature Series Packages 4 Year / 50,000 Mile Warranty Contact a Dinan Representative or visit dinancars.com for information on the most extensive line of 6 Series
Internal Report: Tecnam P92 ES (ZK-CDL) Nose Leg Failure 25/07/2015
0753 West Airport 25 November 2015 Internal Report: Tecnam P92 ES (ZK-CDL) Nose Leg Failure 25/07/2015 Summary On 25/07/2015 the nose leg on Tecnam P92ES, registered ZK-CDL, failed due to fatigue and collapsed
Study on Flow Fields in Variable Area Nozzles for Radial Turbines
Vol. 4 No. 2 August 27 Study on Fields in Variable Area Nozzles for Radial Turbines TAMAKI Hideaki : Doctor of Engineering, P. E. Jp, Manager, Turbo Machinery Department, Product Development Center, Corporate
EXPERIMENTAL INVESTIGATION RESULTS OF A HYBRID CERAMIC AND ACTIVELY COOLED BALL BEARING FOR GAS TURBINES
EXPERIMENTAL INVESTIGATION RESULTS OF A HYBRID CERAMIC AND ACTIVELY COOLED BALL BEARING FOR GAS TURBINES 13 October 2016 Brussels, Belgium Dr.-Ing. P. Glöckner FAG Aerospace GmbH & Co.KG HYBRID CERAMIC
European Aviation Safety Agency. Zeppelin LZ N07
European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET Zeppelin LZ N07 Normal and Commuter Airship Type Certificate Holder: Friedrichshafen, Manufacturer: Friedrichshafen, Variants: LZ N07-100
PRODUCT BROCHURE TRULY THE LIGHTEST AND STRONGEST CARBON FIBER WHEELS
TRULY THE LIGHTEST AND STRONGEST CARBON FIBER WHEELS THERE S NO BETTER PROVING GROUND THAN RACETRACKS! Yamaha Austria Racing Team Official ROTOBOX Testing Team ABOUT THE ROTOBOX WHEEL The Rotobox Carbon
Composite Long Shaft Coupling Design for Cooling Towers
Composite Long Shaft Coupling Design for Cooling Towers Junwoo Bae 1,#, JongHun Kang 2, HyoungWoo Lee 2, Seungkeun Jeong 1 and SooKeun Park 3,* 1 JAC Coupling Co., Ltd., Busan, South Korea. 2 Department
Investigation Report. Bundesstelle für Flugunfalluntersuchung. Identification. Factual Information
Bundesstelle für Flugunfalluntersuchung German Federal Bureau of Aircraft Accident Investigation Investigation Report 1X002-06 November 2011 Identification Type of Occurrence: Accident Date: 15 May 2006
FEA Based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft
, July 5-7, 2017, London, U.K. FEA Based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft Ashwani Kumar, Neelesh Sharma, Pravin P Patil Abstract The main
Los Angeles County One Gateway Plaza ~13.g Tel Metropolitan Transportation Authority Los Angeles, CA rnetro.net
@ Metro Los Angeles County One Gateway Plaza ~13.g22.2000 Tel Metropolitan Transportation Authority Los Angeles, CA 90012-2952 rnetro.net PLANNING AND PROGRAMMING COMMITTEE MAY 16,2012 SUBJECT: PERSONAL
Rea Vaya Bus Rapid Transit (BRT) Project
Rea Vaya Bus Rapid Transit (BRT) Project Presentation to ITS SA 30th May 2008 Contents Background Phased implementation Work streams Operator business model Infrastructure contracts Stations Fleet ITS
EE5940: Wind Essen.als. Materials and Structural Reliability Sue Mantell Mechanical Engineering
EE5940: Wind Essen.als Materials and Structural Reliability Sue Mantell Mechanical Engineering Focus on Rotor Blades Overview the most complex structural component of a wind turbine Quick overview of Loads
Vibration Fatigue Analysis of Sheet Metal Fender Mounting Bracket & It's Subsequent Replacement With Plastic
Vibration Fatigue Analysis of Sheet Metal Fender Mounting Bracket & It's Subsequent Replacement With Plastic Vikas Palve Manager - CAE Mahindra Two Wheelers Ltd D1 Block, Plot No 18/2 (Part), Chinchwad,
COLD AIR SYSTEM. Installation Instructions for: Part Number Ford Focus SVT
COLD AIR SYSTEM Installation Instructions for: Part Number 21-451 2002-2004 Ford Focus SVT ADVANCED ENGINE MANAGEMENT INC. 2205 126 TH Street, Unit A Hawthorne, CA. 90250 Phone: (310) 484-2322 Fax: (310)
Composite Design for Armoured Fighting Vehicles
Composite Design for Armoured Fighting Vehicles A presentation to IOM 3 18 th March 2008 Dr Mark French QinetiQ Project Manager mafrench@qinetiq.com 01252 394377 Armour and Structural Design Research Areas