Mechanical Lift (Ball Screw, Electric Type)

Transcription

1 Table Type Mechanical Lift (Ball Screw, Electric Type) ML Ultra-low & Mini Type : 220/330 lbs (2) (1) Compact, space-saving, and thin type which can be placed anywhere. Major features of the ML Series ML V-100 During lowering Uses a brushless motor 3.2in. ultra-low platform (no external units attached) Vector control Dry cylinder Built-in unit Power supply: single-phase 110 V Maximum starting frequency 10 times per minute Bellows type full cover (with 'J' at the end) Foot switch with LED Cord: 78.7in. Has a maximum/minimum limit switch Power cord: 118.1in. Maximum usage frequency: 30 times per hour Note) When loading from the side of the table, please do so in the following manner: from side (1) load less than or equal to 1/2 of the loading (see table), and from side (2) load less than or equal to 1/4 of the loading (see table) Note) Do not carry out welding operations on top of the table. Bellows ML V ML V ML V ML V ML VJ ML VJ 330 lbs 330 lbs W L to to to to 16.9 Duration of lifting and lowering (in seconds) Motor output (W) lbs 93 lbs 68 lbs 77 lbs 104 lbs 86 lbs * A bellows cannot be installed in a standard type.

2 Mini Type : 220 to 2205 lbs (1) (2) During lowering Note) The 3.2in. ultra-low platform (no external units attached) feature is not available with the MLM Mini Type. Bellows MLM V-12 MLM V-12 MLM V-12 MLM V-12 MLM V-12 MLM WV-12 MLM WV-12 MLM WV-12 MLM VJ-12 MLM VJ-12 MLM WVJ lbs 551 lbs W L Duration of lifting and lowering (in seconds) to to Motor output (W) to to to to lbs 75 lbs 88 lbs 99 lbs 110 lbs 93 lbs 97 lbs 110 lbs 108 lbs 132 lbs 130 lbs * A bellows cannot be installed in a standard type.

3 Table Type Mechanical Lift (Ball Screw, Electric Type) MLP Mini Type Using IPM Motor : 551 lbs (2) MLP (1) Long service life and high output by adopting the IPM motor Major features of the MLP Series Uses IPM motor Vector control Dry cylinder Built-in unit 110 V power supply Maximum starting frequency 10 times per minute Bellows type full cover (with 'J' at the end) Foot switch with LED Cord: 78.7in. Has a maximum/minimum limit switch Power cord: 118.1in. No oil leaks due to ball screw cylinder Cam-type cylinder head enhances rigidity Through strengthening the axis, durability is enhanced Does not fall by itself Note) When loading from the side of the table, please do so in the following manner: from side (1) load less than or equal to 1/2 of the loading (see table), and from side (2) load less than or equal to 1/4 of the loading (see table) Note) Few subductions will occur. Note) The unit cannot be used outdoors, or in places that are dusty, with high temperature and humidity, or in temperatures (0 C or below). MLP MLP MLP J MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 MLP V-12 W L 2205 lbs to to to to to to to to to to to to to 34.8 Lifting duration (in seconds) Unloaded to loaded Approx. 20 Approx. 14 Approx. 18 Approx. 14 Approx. 18 Approx. 14 Approx. 15 Approx. 14 Approx. 15 Approx. 25 Approx. 32 Approx. 25 Approx. 32 Lowering duration (in seconds) Unloaded to loaded Approx. 20 Approx. 14 Approx. 18 Approx. 14 Approx. 18 Approx. 14 Approx. 15 Approx. 14 Approx. 15 Approx. 25 Approx. 32 Approx. 25 Approx. 32 Usage frequency Motor output (W) 551 lbs to 22.4 Approx. 20 Approx times / hour 99 lbs 110 lbs 70 w Bellows 551 lbs 15 times / hour 132 lbs 551 lbs 254 lbs 232 lbs 276 lbs 331 lbs 1102 lbs 15 times / hour 353 lbs 400 w 353 lbs 375 lbs 331 lbs 397 lbs 342 lbs 408 lbs * A bellows cannot be installed in a standard type.

4 MLP Low & Mini Type Using IPM Motor : 220/330 lbs Table Type Mechanical Lift (Ball Screw, Electric Type) (2) MLP (1) Compact, space-saving, and thin type which can be placed anywhere. Major features of the MLP Series Uses IPM motor 3.4in. low platform (no external units attached) Vector control Dry cylinder Built-in unit 110 V power supply Maximum starting frequency 10 times per minute Bellows type full cover (with 'J' at the end) Foot switch with LED Cord: 78.7in. Has a maximum/minimum limit switch Power cord: 118.1in. Quiet operation through the use of planetary gears in the decelerator (MLP-150-** is a helical gear) No oil leaks due to ball screw cylinder Cam-type cylinder head enhances rigidity Through strengthening the axis, durability is enhanced Does not fall by itself With built-in control board BOX (excluding MLP-150-**) Note) When loading from the side of the table, please do so in the following manner: from side (1) load less than or equal to 1/2 of the loading (see table), and from side (2) load less than or equal to 1/4 of the loading (see table) Note) Little deflection will occur. Note) The unit cannot be used outdoors, or in places that are dusty, with high temperature and humidity, or in temperatures (0 C or below). Bellows MLP MLP MLP MLP MLP J MLP J 330 lbs 330 lbs W x L to to to to 16.9 Lifting duration (in seconds) Unloaded to loaded Approx. 10 Approx. 10 Lowering duration (in seconds) Unloaded to loaded Approx. 10 Approx. 10 Usage frequency 30 times / hour 30 times / hour 79 lbs 93 lbs 68 lbs 77 lbs 104 lbs 86 lbs Motor output (W) 70 w * A bellows cannot be installed in a standard type.

5 Table Type Mechanical Lift (Ball Screw, Electric Type) MLSB Ultra-low & Slim Type : It is possible to directly place a hand-pushed cart or a flat cart currently in use on top of the lift. Eliminates the need to pile up items repeatedly for work efficiency. Major features of the MLSB Series Ultra-low platform Stand-alone unit Foot switch cord: 78.7in. Power cord: 118.1in. (E-type) Major specifications * When the table is raised from the lowest position to the highest position, the table shifts up to 1.1in. in the longitudinal direction (direction of L). MLSB MLSB Push cart Anchor hole 0.5 Adjust the height for work efficiency and improve productivity Electric ball screw type MLSB MLSB MLSB MLSB MLSB MLSB W L Lifting duration Lowering duration Motor Output (in seconds) (in seconds) (W) 3.2 to to lbs 66 lbs 71 lbs 75 lbs 79 lbs 84 lbs maximum usage frequency: 30 times per hour

6 Table type Mechanical Lift/Ball Screw, Electric type MLI Powerful Type : 1103 to 2205 lbs (2) (1) This Series of lift tables are heavy-duty and could be used up to 100,000 cycles continuously. Major features of the MLI Series Low cost-equivalent to hydraulic lifts Three-phase AC 220V Single-phase AC 115V Has a maximum/minimum limit switch Can be used consecutively up to 100,000 cycles Note) When loading from the side of the table, do so in the following manner: from side (1) load less than or equal to 1/2 of the load (see table), and from side (2) load less than or equal to 1/4 of the load (see table). Note) Not for use as a welding table Electric Circuit Diagram: 115 V Specification Electric Circuit Diagram: 220 V Specification W L Lifting duration (in second) 60Hz Motor output (W) Turn table MLI W MLI MLI MLI MLI TN 1103 lbs 1103 lbs 1654 lbs 2205 lbs 2205 lbs * to to to to to lbs lbs lbs lbs lbs Note) *1: Turntable dimensions: W 43.3 x H 43.3

7 Push cart type Hydraulic/step type HLH Aluminum : 110 to 176 lbs This cart has been made lighter by using aluminum as product material. It is ideal for lifting/lowering and transporting heavy items on the go. It is also equipped with a handle to make it easier to carry around. Major features of the HLH Series Hydraulic cylinder Casters with brakes Foot pedal type Comes with an overloading prevention device *1 Major specifications HLH-A50 Oil used Materials Turbine oil: ISO VG22 Pump : Aluminum Cylinder : Aluminum Main body : Aluminum *1 The lifter will not elevate when overloaded. During lowering Can be easily carried onto your vehicle with loads. W L Overall length Wheels Number of pump steps Aluminum HLH-A50 HLH-A60 HLH-A lbs 132 lbs 176 lbs to to to Approx. 6 times Approx. 7 times Approx. 14 times 25.1 lbs 30.1 lbs 44.1 lbs * The push handles of HLH-A50, A60 and A80 can be folded.

8 Push cart type Hydraulic/step type HLH : 264 to 2205 lbs The cart can be moved freely and can be elevated from a low position to a high position according to the work environment. It is a lifter with many applications and is only limited by your imagination. Also, based on the JIS standard, the lowering of the table is minimized to 2% or less strokes when left for 15 minutes with the maximum load weight. Major features of the HLH Series Hydraulic cylinder Swivel casters with brakes Foot pedal type Comes with an overloading prevention device *1 Has a springback mechanism in the release handle. In an emergency, lowering will stop as soon as you release the handle *2 Note) To raise the lift, tighten the release handle. Foot pedal for easy height adjustment HLH-400M Height can be adjusted to match the work line by just stepping on the pedal. This is very useful in improving work efficiency. Oil used Turbine oil: ISO VG22 Materials Pump : Urethane type resin spray painting Cylinder : Urethane type resin spray painting Main body : Baked melamine / Powder coating *1 The lifter will not elevate when overloaded. *2 This is not attached to the HLH-100. Hydraulic circuit diagram Table Release handle Arm Push handle Cylinder Foot pedal Rigid caster Hydraulic pump Stopper High-pressure hose Chassis Swivel caster HLH-120

9 Push cart type HLH-400SW HLH-400SW During lowering HLH-100 HLH-120 HLH-150W HLH-200 HLH-300W HLH-400S HLH-400SW HLH-400M HLH-400L HLH-500MW HLH-700 HLH-1000M HLH-1000L 264 lbs 330 lbs 441 lbs 661 lbs 882 lbs 1103 lbs 1543 lbs 2205 lbs W L to to to to to to to to to to to to to 48.8 Overall length (LL) Wheels φ5.9 rubber φ3.9 urethane φ5.1 rubber φ5.9 rubber φ5.9 rubber φ7.9 urethane φ5.9 urethane φ7.9 urethane Number of pedals steps fast / standard Approx. / 12 times Approx. / 20 times Approx. / 62 times Approx. / 36 times Approx. / 85 times Approx. / 62 times Approx. / 58 times Approx. / 58 times Approx. / 85 times Approx. 49 / 129 times Approx. / 85 times Approx. 35 / 84 times Approx. 49 / 129 times 41.9 lbs 66.1 lbs 150 lbs 99 lbs lbs 154 lbs 176 lbs lbs 176 lbs lbs lbs * The push handle of HLH-100 can be folded.

10 Push cart type Hydraulic/step type HLH Ultra-low Type : 220 to 882 lbs Available with incleased standard stroke. Equipped with easy movement wheels. Lift table lowers to 3.2 inches. Major features of the HLH Series Hydraulic cylinder Casters with brakes Foot pedal type Overloading prevention device Nose dive prevention valve (HLH L only) Push handle HLH L Release handle Pump pedal 2 urethane rigid casters 2 rubber swivel casters (with brakes on both wheels) During lowering Low Platform 441 lbs 882 lbs W L to to to 31.0 Total length (LL) Wheel dimensions Swivel casters Rigid caster with brakes φ3.0 φ3.0 φ3.0 φ3.9 φ4.9 φ5.9 Number of pump steps Approx. 20 times 77 lbs Approx. 46 times lbs Approx. 70 times lbs The swivel casters have rubber wheels and the rigid casters have urethane wheels. HLH L has rubber wheels.

11 Push cart type Hydraulic/step type HLH Handle-less : 220 to 441 lbs With the handle removed from the standard type, this cart is ideal for loading long items. Major features of the HLH Series Hydraulic cylinder Swivel casters with brakes (double stopper for models other than HLH-100HL and HLH-120HL) Foot pedal type Comes with an overloading prevention device *1 Option Pump with a rapid traverse device Major specifications Oil used Materials Turbine oil: ISO VG22 Pump : Urethane type resin spray painting Cylinder : Urethane type resin spray painting Main body : Baked melamine / Powder coating *1 The lifter will not elevate when overloaded. HLH-200HL Useful for carrying long loads such as panels and poles. [Handle-less type pump diagram] Release handle Foot pedal W L Overall length (LL) Wheels Number of pump steps Handle-less HLH-100HL HLH-120HL HLH-200HL 264 lbs 441 lbs to to to Approx. 12 times Approx. 22 times Approx. 36 times 41.9 lbs 66.2 lbs 99.2 lbs * This cart is also available with bellows (except HLH-100HL).

12 Table type Hydraulic Lift (step type) MLSH Ultra-low & Slim : 330 lbs It is possible to directly place a hand-pushed cart or a flat cart currently in use on top of the lift. Work can be more efficient since there is no need to pile up items over again on the table lift. Major features of the MLSH Series Ultra-low platform Hydraulic cylinder Stand-alone unit Foot switch cord: 6.6 feet High-pressure hose: 6.6 feet Power cord: 13.1 feet (E-type) Major specifications Oil used Turbine oil: ISO VG22 (H-type) * When the table is raised from the lowest position to the highest position, the table shifts up to 1.1 inch in the longitudinal direction (direction of L). MLSH MLSH Push cart Anchor hole Adjust the height for work efficiency and improve productivity. W L Number of pump steps Ultra-low & Slim type MLSH MLSH lbs to to 27.6 Approx. 25 times 88.2 lbs lbs

13 Fork type Hydraulic/step type HLFN : to 2205 lbs By installing cylinders under the forks, we were able to eliminate the part of hydraulic unit from push handle area for more efficient work space. Major features of the HLFN Series Hydraulic cylinder Swivel casters with brakes Foot pedal type Comes with an overloading prevention device *1 Major specifications Oil used Turbine oil: ISO VG22 *1 The lifter will not elevate when overloaded. L Overall height Fork width Overall width W Overall length HLFN-500F Overall length Overall width Overall height Fork dimensions W x L Fork width Fork height Wheels (Swivel caster / Rigid caster) Number of pump steps 1103 lbs to φ5.9 rubber / φ3.0 urethane Approx. 52 times lbs

14 Mast Type Mechanical Lift (Ball Screw, Electric Type) HFH : 441 lb Battery powered high-performance achieved at a low cost! This is one equipment necessary for transporting small articles. Major features of the HFH Mechanical Lift Series Uses IPM motor Clean operation without oil leaks due to the dry cylinder Does not fall by itself Maintenance free Battery-powered type that is very simple to operate With vector control for smooth operation Cylinder Inside unit box HFH-P Electric types comparison table Hydraulic type HFH-DXXX Ball screw type HFH-BXXX Speed Cost Swivel caster Rigid caster HFH-P200-9 HFH-P HFH-P center Fork height Fork dimensions Leg dimensions Wheel dimensions External dimensions Lifting duration Battery Motor loaded/ distance Minimum Minimum Maximum Length Width Thickness Slide outside Height Internal External Rigid Swivel Total Total Total casters with unloaded DC 12 V (LC) height A height *A height B C D E width F to G H width J width K caster brakes length L width M height N (in seconds) kw /21 168lb 441lb to /29 30A19L lb /37 181lb When the fork is placed on the legs the minimum height will be increased by about 0.4in.

15 Mast Type Hydraulic/step type HFH : 330 to 1323 lb HFH-H150-9 type which can work easily even in narrow gaps Useful in transporting pallets between narrow spaces and walkways. Major features of the HFH Manual Type Series Compact hydraulic step type lifter is easy to operate in narrow walkways. Low total height type is easy to operate in entrances and exits and in buildings with low ceilings. Swivel handling with creatively designed plated handles. The rigid casters have urethane wheels, and the swivel casters have rubber wheels with brakes on both sides. Strong and light-weight mast and fork design that uses high tensile strength steel. Comes with an overloading prevention valve. Fork width is easy to adjust. Mast with new structure that prevents fork vibration. Comes with a rapid traverse device (attached to the HFH-H150 or H200). Has a springback mechanism in the release handle. In an emergency, lowering will stop as soon as you release the handle. The pump pedal is designed to be easy to press. Release handle Lowering Spring Spring tension HFH-H200-9 The release handle returns by spring tension, so in an emergency, the fork will stop lowering as soon as you release the handle. Note) Close the release handle when raising the lift. HFH-H150-9 HFH-H HFH-H HFH-H200-9 HFH-H HFH-H HFH-H300-9 HFH-H HFH-H lb 441lb 661lb center distance (LC) Minimum height A Fork height Fork dimensions Leg dimensions Wheel dimensions External dimensions Number of pump steps Minimum Maximum Length Width Thickness Slide outside Height Internal External Rigid Swivel casters Total Total Total height *A height B C D E width F to G H width J width K caster with brakes length L width M height N No load Full load to to to The swivel casters have rubber wheels and the rigid casters have urethane wheels. * When the fork is placed on the legs the minimum height will be increased by about 0.4in lb 110lb 117lb 101lb 108lb 115lb 190lb 212lb 251lb

16 Mast Type HFH-H500-9 HFH-H Swivel casters Rigid casters HFH-H400-9 HFH-H HFH-H HFH-H500-9 HFH-H HFH-H HFH-H600-9 HFH-H HFH-H lb center distance (LC) 13.8 Minimum height A lb lb Fork height Fork dimensions Leg dimensions Wheel dimensions External dimensions Number of pump steps Minimum Maximum Length Width Thickness Slide outside Height Internal External Rigid Swivel casters Total Total Total height *A height B C D E width F to G H width J width K caster with brakes length L width M height N No load Full load to to to The swivel casters have rubber wheels and the rigid casters have urethane wheels. * When the fork is placed on the legs the minimum height will be increased by about 0.4in lb 209lb 249lb 247lb 269lb 291lb 243lb 265lb 287lb