Ivar Aasen Field Development Project

Size: px

Start display at page:

Download "Ivar Aasen Field Development Project"

Earl Flynn
6 years ago
Views:

Ivar Aasen Field Development Project As-Built 03M 24.01.2017 Approved 02M 06.10.2016 Approved 02M 06.09.2016 Approved 01E 17.08.2016 IFR Rev.

1 Ivar Aasen Field Development Project As-Built 03M Approved 02M Approved 02M Approved 01E IFR Rev. Date Reason for Issue Prepared by Reviewed by Approved by Ivar Aasen Temporary Equipment Information Area Code: System Code: Document Number: Revision Code: No. of Pages: 8 Contract No.: NA

2 2 of 8 Innholdsfortegnelse 1 Electrical Instrument Telecom Utilities Lifting Capasity Offshore Crane... 8

3 3 of 8 1 Electrical Power Volt Freq Phase Curr. Neut. Loaded * V Hz A Yes/No Main 230 1ph+ N+PE Sys. Earth S/I/R ** Short Circuit Level Min ka Max ka Distribution Protection Fuse A Earth Fault Connection Platform Desc./Type Y S 16 Stahl 8570/ Connect ion Tempor ary Equipm ent Desc./ Type Stahl 8570/ Area Module / Utility station UPS 230 L1 +L2 +PE N I 16 Stahl 8570/ Stahl 8570/ Main 400 3ph+ N+PE Y S 63 Stahl 8579/ Stahl 8579/ Emerg 690 3ph+ PE N I 125 Stahl 8581/ Stahl 8581/ Emerg 690 3ph+ PE N I 200 Tranberg junction box, terminal connection Weidmueller WWF185 Weidmu eller WWF185 * Main Main Power (hovedkraft) UPS 230 V UPS (avbruddssikker kraftforsyning) Emerg Emergency Power (nødkraft) ** S Solid (direkte jordet) I Isolated (isolert) R Resistor (resistansjordet)

4 4 of 8 2 Instrument Function Loss of pressure Signal Type NC (contact open= alarm) Connection Platform Connection Temp. Equipment Area Desc. / Type Desc. / Type Module / Utility station GHG R0001 6h Pin 7,8,9 GHG R0002 6h Pin 7,8,9 Utility station 1 West: 8 outlets Utility station 2 East: 8 outlets Fire NC (contact open= alarm) GHG R0001 6h Pin 1, 2, 3 GHG R0002 6h Pin 1,2,3 Utility station 1 West: 8 outlets Utility station 2 East: 8 outlets Gas NC (contact open= alarm) GHG R0001 6h Pin 4, 5, 6 GHG R0002 6h Pin 4,5,6 Utility station 1 West: 8 outlets Utility station 2 East: 8 outlets General alarm from Container NC (contact open= alarm) GHG R0001 6h Pin 10, 11, 12 GHG R0002 6h Pin 10,11,12 Utility station 1 West: 8 outlets Utility station 2 East: 8 outlets

5 21 pins connector for instrument signals: 5 of 8 Install loop resistors in container junction box. 10 K ohm in parallel and 1 K ohm in series.

6 6 of 8 3 Telecom Function PAGA Signal Type Audio, 100V line. Connection Platform Connection Temp. Equipment Area Desc. / Type Desc. / Type Module / Utility station Hawke Instrum 4 pins N- 4WAY BR Pin 1 and 2. Locking position 2 Hawke Instrum 4 pins N-4WAY CP Pin 1 and 2. Locking position 2 Utility station 1 West: 5 outlets Utility station 2 East: 5 outlets Telephone Audio Hawke Instrum 4 pins N- 4WAY BR Pin 1 and 2. Locking position 1 Hawke Instrum 4 pins N-4WAY CP Pin 1 and 2. Locking position 1 Utility station 1 West: 3 outlets Utility station 2 East: 3 outlets Data (fiber) SM Fiber Q-ODC-4 hex bulkhead connector with 9/125 SM pigtal Q-ODC-4 plug Utility station 1 West: 3 outlets Utility station 2 East: 3 outlets

7 7 of 8 4 Utilities Function Normal Max Temp Temp Temp Connection Pipe Spec. Area Pressure Pressure min max Normal barg barg C C C Module / Utility station Plant air Chicago claw (open ended) Service water HP Hotwater Snaplock (Open ended) /8 BSP (Open ended) To fit Spray guns, additional quick coupling Nitrogen Snaptite H ST (open ended) Diesel Amb 1 Snaptite H ST (open ended) 1 150# RF Flange 1 150# RF Flange # RTJ Flange 1 150# RF Flange 2 150# RF Flange

8 8 of 8 5 Lifting Capasity Offshore Crane Kran Driftsbegrensninger for hurtigløft med enkel wire 1 Meter 2 Meters 3 Meters Kran 73MA / / / 50.0 Driftsbegrensninger for hovedkroksløft med dobbelt fall (2 wire) 1 Meter 2 Meters 3 Meters Kran Kran 73MA / / / 37.5 Driftsbegrensninger for hovedkroksløft med trippel fall (3 wirer) 1 Meter 2 Meters 3 Meters Crane Kran 73MA / / 30.0 NA Ref: DN02-S09132-N-CA-0002 "Calculation - Load Charts" Rev 04I Korrekt vekt på utstyret er avgjørende for sikker løfting mellom skip og installasjon. Leverandør er ansvarlig for å angi korrekt vekt på alle kolli som leveres basen, om nødvendig må det sørges for veiesertifikat på enheten. Correctly stated weight on the equipment is essential for safe lifting operations between vessel and installation. The supplier is responsible for giving correct weight on all packages delivered to the base, and if necessary a weight certificate must be provided for the unit.

LIVE DEMATEABLE CONNECTOR TERMINATION / HOOK UP PROCEDURE

Instrum LIVE DEMATEABLE CONNECTOR TERMINATION / HOOK UP PROCEDURE (AI364 Rev 11 05Oct17) Hawke International UK Office, Oxford Street West, Ashton-under-Lyne, Lancashire. OL7 0NA. UK Sales: +44 (0) 161