Eickhoff Continuous Miner Model CM 2
|
|
- Owen Nicholson
- 6 years ago
- Views:
Transcription
1 Continuous Miners
2 Eickhoff Continuous Miner Model CM 2 The Eickhoff CM 2 is worldwide the only Continuous Miner available giving customers the choice between two high powered traction drive concepts. H Version The H type is a proven full Hydraulic Motor driven Traction System with significant advantages in wet and muddy floor conditions. E - Version The E type is a full Inverter AC motors driven Traction System for customers who prefer this option. Cutter Gearcase The Cutter Gearcase concept is based on two separate LH and RH units connected together to provide the full installed motor power of 480 hp to the cutting drums. The two parts allow easy handling during installation underground. Maintenance and production engineers will appreciate the possibility to replace torric seals underground. Either of the gearcases can be independently changed out should the need arise. Cutter Drums The cutting diameter is 48 and the cutting width 12. The bit tip speed of 10.2 ft/s is the most important contribution to avoid unnecessary dust and fines creation. Drums are laced according to customer conditions and requirements. Conveyor and gathering head The combination of high speed CLA's (Centrifugal Loading Arms) and a 3 2 wide flight chain ensures unrestricted shear downs and minimum time for loading shuttle cars or continuous haulages. Easy chain tensioning and automatic slack compensation over the entire angle of swivelling is a matter of course. Traction system Head to head, when it comes to performance, the electric and the hydraulic traction systems provide lowest ground pressure and highest tramming speed and traction force. Mines with wet and muddy floor conditions will benefit from the high reliable hydraulic traction motors.
3 Electrical system The unique electrical control design concept makes a transformer obsolete. All electrical components for operational control and monitoring are placed in a single flameproof box in a high and dry position with best access for maintenance and trouble shooting. Two IPC's (Industrial Personal Computers) and microprocessor controlled motor protection devices reduce the number of electrical components and wiring to a minimum and increase the availability. Comprehensive data logging and transmission of relevant operational figures to surface give mine engineers the opportunity to optimize their production process. Hydraulic The advanced hydraulic system feeds all the lifting and swing cylinders and the traction motors. Despite the high pump volume the on board oil capacity is lower than most of the existing CM's on the market. In conjunction with the electric system proportional sump and shear is provided and can easily be adjusted by IPC settings. Scrubber, methane system, water sprays Depending on cutting height and customers requirements, almost all available makes of scrubbers can be fitted to the Eickhoff CM 2. Starting with 100 cuft/s hooded or open system with hydraulic or electric fan motor for low seams in the range of 5 3, up to 300 cuft/s with 60 hp electric motor for mid seam applications. Any methane system and water spray system can be fitted to the machine Driver seat The standard machine comes with remote control. Depending on customers requirement, the Eickhoff CM 2 can be equipped with control desk, driver seat and protective canopy in addition to remote control.
4 * option Specifications Eickhoff CM2/37 Machine weight Ground pressure Tram speed Track chain width Chassis width Chassis height Cutting width Drum diameter Drum speed Bit tip speed CLA speed Supply voltage 75 sh tn 30 psi 65 fpm 20 in 10 ft 4 ft 12 ft 48 in 49 rpm 10.2 ft/s 59 rpm 1,000 V / 60 Hz Hydraulic tram version Traction power - 1 x 170 hp 784 hp Electrical tram version Traction power 2 x 67 hp 1 x 85 hp 833 hp
5 * option Specifications Eickhoff CM2/45 Machine weight Ground pressure Tram speed Track chain width Chassis width Chassis height Cutting width Drum diameter Drum speed Bit tip speed CLA speed Supply voltage 83 sh tn 30 psi 65 fpm 22 in 10 ft 4 ft 5 in 12 ft 48 in 49 rpm 10.2 ft/s 59 rpm 1,000 V / 60 Hz Hydraulic tram version Traction power - 1 x 170 hp 784 hp Electrical tram version Traction power 2 x 67 hp 1 x 85 hp 833 hp
6 Eickhoff Bergbautechnik GmbH Hunscheidtstr. 176 D Bochum GERMANY Phone: Fax: SUBSIDIARIES worldwide Eickhoff Corporation Pittsburgh Eickhoff (G.B.) Ltd. Sheffield Eickhoff Polonia Ltd. Mikolow Eickhoff Sibir Kiseljovsk Eickhoff Beijing Eickhoff Australia PTY. Ltd. 41, Prince William Drive Seven Hills, NSW AUSTRALIA Phone: 0061/2/ N Fax: 0061/2/ eickhoffaust@optusnet.com.au W E Eickhoff PTY. Ltd. Johannesburg Eickhoff Australia PTY. Ltd. Sydney Eickhoff Corporation S Eickhoff G.B. Ltd. Eickhoff (Pty) Ltd. 200 Park West Drive Darnall Works 12 Strauss Crescent Pittsburgh/PA Prince of Wales Road Wadeville Ext.6 USA Sheffield S9 4EX Germiston Phone: / UNITED KINGDOM SOUTH AFRICA Fax: / Phone: 0044/ Phone: dpodobinski@eickhoff.us Fax: 0044/ Fax: contact@eickhoffgb.idps.co.uk md@eickhoff.co.za Eickhoff Polonia Ltd. Eickhoff Office Beijing Eickhoff Sibir Ul. Podleska 72 Room A708 Kemerower Gebiet (KD-Barbara) Huixin Plaza Gogolstr. 25 PL Mikolow N. 8 Beichen East Road Kiseljevsk POLAND Chaoyang District RUSSIA Phone: 0048/ Beijing Phone: 007/ Fax: 0048/ P.R. CHINA Fax: 007/ eickhoff_sekretariat@onet.pl 0086/10/ eickhoff@nvkz.net 0086/10/ eickhoff@vip.sina.com
experience has no substitute Continuous Miner CM2 Series
has no substitute experience has no substitute Continuous Miner CM2 Series www.eickhoff-international.co Eickhoff Bergbautechnik GbH the Mining Equipent Division Eickhoff Bergbautechnik GbH located in
More informationContinuous Miner CM2 Series
has no substitute experience has no substitute Continuous Miner CM2 Series Foto: Godehardt www.eickhoff-international.co CM2H-45 CM2H-36 Eickhoff Bergbautechnik GbH the Mining Equipent Division Eickhoff
More informationCM235. Continuous Miner
CM235 Continuous Miner Power Cutting Total Power 701 kw 940 hp 0 to Maximum Cut 914-3251 mm 36-128 in Cutter Head Power 410 kw 550 hp [2.8 m3/sec (6,500 ft3/min) scrubber] Loading Unit Machine Weight Loading
More informationTotal Power 884 kw 1,185 hp 0 to Maximum Cut mm in Cutter Head Power 500 kw 670 hp
CM445 Continuous Miner Power Cutting Total Power 884 kw 1,185 hp 0 to Maximum Cut 1492-3989 mm 58.75-157 in Cutter Head Power 500 kw 670 hp Loading Unit Machine Weight Loading Capacity 14-35 tonnes/min
More information14CM Series Continuous Miner Product Overview
14CM Series Continuous Miner Product Overview Total control The latest in VFD technology... Service Leader Zero Harm Today s 14CM traction system builds on years of field-tested performance to offer even
More informationBolter Miner ABM Technical Description
Bolter Miner -016 Bolter Miner -016 TABLE OF CONTENTS 1 TECHNICAL DESCRIPTION 1.1 General 1. Technical data 3 1.3 Dimensions of the machine 6 1.4 Cutter head profile 6 MACHINE CONCEPT - MAJOR COMPONENTS
More information12HM Series Continuous Miner Product Overview
12HM Series Continuous Miner Product Overview Total Control The latest in VFD technology... 12HM Series For the industrial minerals market, Joy offers the 12HM (Heavy-duty miner) series continuous miner.
More informationSANDVIK CR320 FEEDER BREAKER
SANDVIK CR320 FEEDER BREAKER TECHNICAL SPECIFICATION The Sandvik feeder breaker CR320 is a robust, modular machine designed for heavy duty underground coal mine operations. The machine is suitable for
More informationSAMINCO ELECTRIC TRACTION DRIVES
JR1000 VFD SYSTEMS JR1000 FAMILY OF 1000VAC VFD* SYSTEMS FOR UNDERGROUND MINING APPLICATIONS *VARIABLE FREQUENCY DRIVE 1000VAC TECHNOLOGY Shuttle Cars Continuous Miners Feeder Breakers Road Headers Shearers
More informationAC Mining Motors. AC Motors for the Continuous Miner
AC Mining Motors AC Motors for the Continuous Miner CUTTERHEAD Motor - 175 kw 50 Hz S1 340 HP 60 Hz S1 New motor for Mega-head application. This motor drives the cutter head on the Joy 12HM31 continuous
More informationLokotrack LT110 and LT3054 mobile jaw plants
Lokotrack LT110 and LT3054 mobile jaw plants PRODUCT PRESENTATION Lokotrack LT110 and LT3054 - the new generation Lokotracks Combining over 20 years of experience with the original Lokotrack mobile crushing
More informationHW300. Highwall Mining System
HW300 Highwall Mining System Weight (without Cutter Module) Operating Specification Machine Weight 225 000 kg 495,665 lb Maximum Penetration Capability 305 m 1,000 ft Mine Mode Dimensions (without Cutter
More information2009 / 10 PTO TRUCK PUMPS
09 / 10 PTO TRUCK PUMPS GEAR PUMP MANUFACTURING (PTY) LTD PTO GEAR PUMP RANGE TANDEM PUMP Pump Specifications Manufactured in South Africa SINGLE PUMP GP3 SINGLE PUMP 024 032 040 048 102 118 132 147 GP3T
More informationThermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
More informationSolutions for tunneling and mining. MEYCO Piccola - GM. Expanding Horizons Underground
Solutions for tunneling and mining MEYCO Piccola - GM Expanding Horizons Underground Both MEYCO Piccola and MEYCO GM are used for processing sprayed concrete. This is an adaptable, flexible and economical
More informationMobile crushing plant Lokotrack LT106
Mobile crushing plant Lokotrack LT106 Lokotrack LT106 Lokotrack LT106 Groundbreaking Excellence The improved successor to the industry benchmark in mobile crushing takes production capacity to a whole
More informationPower Station Fans. Heavy Duty Axial and Centrifugal Fans. a company of
Power Station Fans Heavy Duty Axial and Centrifugal Fans a company of History&Technology. Thomas Neff Vice President, Order Execution The roots of TLT-Turbo GmbH go back far into the last century. In 1873
More informationFace Haulers. Product Line
Face Haulers Product Line Power and Performance Face haulage the transport of mined coal from the working face to the conveyor belt is a key factor in underground mine efficiency, particularly in room
More informatione. High Pressure Grinding Roller Presses.
2-318.07e High Pressure Grinding Roller Presses www.khdhumboldt.com High Pressure Grinding KHD Humboldt Wedag Roller Presses. With our Roller Presses, the grinding pressure is transferred from the hydraulic
More informationOLKO Maschinentechnik GmbH.
Mining the future. 2 OLKO Maschinentechnik GmbH. Pioneering your world. Since our company was founded in 1989, OLKO Maschinentechnik GmbH has been a driving force in shaft construction and hoisting technology.
More informationBULK MATERIAL HANDLING SYSTEM
(PTY) Ltd BULK MATERIAL HANDLING SPECIALISTS We are proud members of the South African Institute of Materials Handling BULK MATERIAL HANDLING SYSTEM Deebar Rail-Veyor PTY (Ltd) was the first company to
More informationMaintainability Design Checklist
Maintainability Design Checklist The following is a Maintainability Design Checklist for coal mining equipment. The purpose of the checklist is to provide a summary of design review points for the maintainability
More informationSerial Number 6661 Build Date Full overhaul and modification in 2011
Miner Equipment Information Plant Number CM0012 Manufacturer Joy mainframe modified by WDS Model 12CM30 - Plough Serial Number 6661 Build Date 1996 - Full overhaul and modification in 2011 Minimum cutting
More informationFALK DRIVE ONE ONE DRIVE FOR ONE WORLD (English Inch)
FALK DRIVE ONE ONE DRIVE FOR ONE WORLD (English Inch) ONE RELIABLE DRIVE For more than 100 years, the Falk name has earned a reputation for delivering the highest value gear drive solutions in the power
More informationInstallation Manual. YASKAWA AC Drive Option Back-up Capacitor Unit for Momentary Power Loss. Type: P0010, P0020
YASKAWA AC Drive Option Back-up Capacir Unit for Momentary Power Loss Installation Manual Type: P0010, P0020 To properly use the product, read this manual thoroughly and retain for easy reference, inspection,
More informationNordberg TBC, EBC, TEC Series Belt Conveyors. Belt conveyors
Nordberg TBC, EBC, TEC Series Belt Conveyors Belt conveyors www.metsominerals.com Compact and Easy to install Nordberg Compact conveyors and conveyor/extractors are specifically designed for inclusion
More informationSpray System for Dust Control (Patent Pending)
Spray System for Dust Control (Patent Pending) An Innovative Spray System for Control of Dust around a Continuous Miner It utilizes scientifically designed water sprays to minimize worker exposure to respirable
More informationFEIN pipe milling machines. The FEIN solution to pipe cutting.
FEIN pipe milling machines The FEIN solution to pipe cutting. Powerful professionals. FEIN pipe milling machines are world reknown in the field of pipe cutting technology. Their applications range from
More information2000 TO 2015 AN INDUSTRY TRANSFORMED:
2 TO 215 AN INDUSTRY TRANSFORMED: WHAT HAS CHANGED AND WHAT MIGHT HAPPEN NEXT? Bruce Griffin TZMI.COM About TZMI TZMI is a global, independent consulting and publishing company with offices in Australia,
More informationReverse Pulse Bag Filters
Reverse Pulse Bag Filters Optimal solutions for Air Environmental Control TENOVA is a worldwide supplier of advanced technologies, products and engineering services for the iron & steel and mining industries.
More informationSIUC INNOVATIVE SPRAY SYSTEM FOR CONTINUOUS MINERS AND DEVELOPMENT OF LONGWALL DUST CONTROL LABORATORY
SIUC INNOVATIVE SPRAY SYSTEM FOR CONTINUOUS MINERS AND DEVELOPMENT OF LONGWALL DUST CONTROL LABORATORY SIU Research Team Dr. Y. P. Chugh, Dr. Kanchan Mondal, Harrold Gurley, John Pulliam, Mike Smith, Vijaya
More informationEICKHOFF ANTRIEBSTECHNIK CONTROLLING LARGE FORCES EFFICIENTLY
EICKHOFF ANTRIEBSTECHNIK CONTROLLING LARGE FORCES EFFICIENTLY ANTRIEBSTECHNIK 2 GEARBOX SOLUTIONS FOR A WIDE RANGE OF APPLICATIONS Eickhoff gearboxes have been used successfully for many different applications
More informationHW300. Highwall Mining System
HW300 Highwall Mining System Weight (without Cutter Module) Operating Specification Machine Weight 225 000 kg 495,665 lb Maximum Penetration Capability 305 m 1,000 ft Mine Mode Dimensions (without Cutter
More informationDrive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
More informationGas analyzers EL3060 The specialists for hazardous areas
Gas analyzers EL3060 The specialists for hazardous areas Compact and combinable the analyzers E ABB Analytical possesses decades of experience in the area of explosion protection. The EL3060 series unifies
More informationLoesche Group. Image Presentation. Johannes Wallis Sofia,
Loesche Group Image Presentation Johannes Wallis Sofia, 2013-11-06 Agenda History Loesche Today What we do Procurement 2 Agenda 1. History 2. Loesche today 3. What we do 4. Procurement 3 History Video
More informationPAGE 1. Belt Cleaners
PAGE 1 Belt Cleaners Since 2007 TS Global has specialised in the manufacture of a comprehensive range of high quality conveyor accessories and polyurethane components. Our engineering and manufacturing
More informationCold milling machine W 1200 F. Technical specification
Cold milling machine W 1200 F Technical specification Technical specification Cold milling machine Cold milling machine W 1200 F on four wheels W 1200 F on four crawler tracks Milling width max. 3 11 1,200
More informationRoadheaders. Groundbreaking Solutions for Mining & Tunnelling.
Roadheaders Groundbreaking Solutions for Mining & Tunnelling www.schmittwerke.com Features Benefits Robust, modular design Durability Ease of transport and assembly Transverse ripping cutting heads Suitable
More informationIs the heart of your engine protected?
Is the heart of your engine protected? Avoid open-up inspections and protect the heart of your engine with the AMOT Bearing Condition Monitor - XTS-W Bearing Condition Monitor Overview An essential tool
More informationProven Performance Quality Product Flexibility in Design On-time Delivery
Belt Cleaners Since 2007 TS Global has specialised in the manufacture of a comprehensive range of high quality conveyor accessories and polyurethane components. Our engineering and manufacturing expertise
More informationMobile Crushing Plants. Lokotrack LT110 and LT3054 Mobile Jaw Plants. Courtesy of Machine.Market
Mobile Crushing Plants www.metsominerals.com Lokotrack LT110 and LT3054 Mobile Jaw Plants Lokotrack LT110 and LT3054 - the new generation Lokotracks Combining over 20 years of experience with the original
More informationINTRODUCTION HISTORY. Enfocus Software - Customer Support
INTRODUCTION Address : No. 7-2, San-Hu Li, Yangmei City 32669, Taoyuan, Taiwan Date of Incorporation : January 11, 1966 Capital : NT$362 Million (US$ 11 Million) President : Ming-Yih Cheng Products: Mining
More information2 FOREWORD. 2.1 Description of Mine 2.2 Report Preparation Process 2.3 General Acknowledgements
2 FOREWORD 2.1 Description of Mine 2.2 Report Preparation Process 2.3 General Acknowledgements 2.1 Description of the Mine The unincorporated village of Sago is located in Upshur County, West Virginia.
More informationHigh Performance Vector Control Drive Manual Supplement
YASKAWA AC Drive-A1000 High Performance Vector Control Drive Manual Supplement Supplement to: A1000 Quick Start Guide TOEPC71061641C Type: CIMR-AU A Models: 200 V Class: 0.4 to 110 kw (3/4 to 175 HP
More informationTHE SINGARENI COLLIERIES COMPANY LIMITED (A GOVERNMENT COMPANY)
THE SINGARENI COLLIERIES COMPANY LIMITED (A GOVERNMENT COMPANY) Draft Technical Specifications Of MINER BOLTER For Trunk & Road Way Development Of Long wall projects 1.0 GENERAL DESCRIPTION AND SERVICE
More informationIndustrial IT for Papermaking. Paper Machine Drive PMC800 Basic Drive
Industrial IT for Papermaking Paper Machine Drive PMC800 Basic Drive PMC800 Basic Drive for small and mid-sized paper machines The Basic Drive has created the unique PMC800 Basic Drive to meet the needs
More information"International Location Strategies of the European commercial vehicle manufacturers"
VDA Press Workshop, July 14, 2006 "International Location Strategies of the European commercial vehicle manufacturers" Håkan Samuelsson Chairman of the Executive Board of MAN AG 1 Agenda An Overview of
More informationAugust 22 nd, Highwall Mining in India: extending mineable reserves a presentation for CMPDI.
August 22 nd, 2013 Highwall Mining in India: extending mineable reserves a presentation for CMPDI. Introduction Caterpillar Highwall Mining History The Method The Highwall Miner Questions 2 / Caterpillar
More informationPARTS BULLETIN RETAINING CLIPS (CLIP-5R) FOR COVERS LS170, LS170L, LS190, LS190S RSA, TS490, TS495
PARTS BULLETIN 1(2) PB1501 March 25, 2015 Topic: Concerns: RETAINING CLIPS (CLIP-5R) FOR COVERS LS170, LS170L, LS190, LS190S RSA, TS490, TS495 The Owner of machinery has a liability to inform and when
More informationThird Generation Air Winch Series
Third Generation Air Winch Series 1,450 3,600 kg (3,200 8,000 lb) When Tough Just Isn t Enough Third Generation Air Winches 1,450 3,600 kg (3,200 8,000 lb) Since 1924, Ingersoll Rand has built extremely
More informationRPM Rotor Impact Mill. The sand maker
RPM Rotor Impact Mill The sand maker Headquarter of BHS-Sonthofen BHS-Sonthofen We are a mid-sized, owner-operated group of companies with over 300 employees. We are passionate about technology, innovative,
More informationThe Singareni Collieries Company Limited (A Government Company) KOTHAGUDEM COLLIERIES Khammam District, Andhra Pradesh, (India)
The Singareni Collieries Company Limited (A Government Company) KOTHAGUDEM COLLIERIES 507 101 Khammam District, Andhra Pradesh, (India) TENDER DOCUMENT For Procurement of Continuous Miner Equipment for
More informationTechnical specification. Cold milling machine W 100
Technical specification Cold milling machine W 100 Technical specification Cold milling machine W 100 Milling width max. 1,000 mm Milling depth* 1 0 300 mm Milling drum Tool spacing 15 mm Number of tools
More informationTRACKING SOLUTIONS SUPERIOR TRACTION. BETTER PERFORMANCE. HIGHER YIELDS.
TRACKING SOLUTIONS SUPERIOR TRACTION. BETTER PERFORMANCE. HIGHER YIELDS. UNMATCHED TRACKING PERFORMANCE NFTrax s unique structure starts at the core with a steel rim center. A heavy-duty vulcanized rubber
More informationVOLVO articulated haulers A25E, A30E, A35E, A40E LOW PROFILE HAULER
VOLVO articulated haulers A25E, A30E, A35E, A40E LOW PROFILE HAULER Low Profile Hauler the optimal underground solution Every other articulated hauler manufactured in the world today is a Volvo, and that
More informationHeavy Industry EP new planetary gear units H new helical and bevel-helical gear units
Industries Heavy Industry EP new planetary gear units H new helical and bevel-helical gear units Edition April 2016 H series CUSTOMIZED SOLUTIONS ON REQUEST Size * 400 401 450 451 500 501 560 561 630 631
More informationShafer RV-Series Rotary Vane Valve Actuators Operating Valves in Critical Pipeline Applications
Shafer RV-Series Rotary Vane Valve Actuators Operating Valves in Critical Pipeline Applications Applications Emerson Process Management Valve Automation is recognized worldwide for the reliability of its
More informationTerex Minerals Processing Systems JW SERIES JAW CRUSHERS
Terex Minerals Processing Systems JW SERIES JAW CRUSHERS DESIGNED TO DELIVER Terex JW Series We have been manufacturing jaw crushers for 120 years and over this period have gained a reputation for producing
More informationSTEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
More informationSTEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
More informationworld class equipment for drilling and bolting
world class equipment for drilling and bolting With years of experience The company s origin dates back to the early 70 s. Mine Master is based at the old Lena copper ore mine that closed when the deposit
More informationMachines. Tandem Rollers ARX t
Machines Tandem Rollers ARX 1.5-4.5 t 2 One Concept - 13 models 3 Platforms - 8 Models - 13 Versions The lightest platform from 1.4 to 1.6 tonnes operating weight and working widths from 82 to 100 cm offers
More informationTechnical specification. Cold milling machine W 35
Technical specification Cold milling machine W 35 Technical specification Milling width max. Milling depth * 1 Milling drum Tool spacing Cold milling machine W 35 14 350 mm 0 2 0 60 mm 1 /2 12 mm Number
More informationMine More. Haul More. Make More. Underground Mining Haulage Equipment. More Tonnes Per Trip Equal More Profit. ISO 9001: 2008 Certified w/o Design
Underground Mining Haulage Equipment Mine More. Haul More. Make More. More Tonnes Per Trip Equal More Profit ISO 9001: 2008 Certified w/o Design United States China Australia South Africa United States
More informationPlants. ColdMix Mobile/Semi-mobile and stationary plants. With productive capacity of t/h
Plants ColdMix Mobile/Semi-mobile and stationary plants With productive capacity of 130 400 t/h Cold Mix 130 400 t/h Flexible, pure and simple : The continuous cold mixing plant Both mobile and stationary
More informationMobile Filtration Systems SMFS-P and SMFS-U
SMFS-P-015 SMFS-U-030 SMFS-U-DL-015-G SMFS-U-060 SMFS-U-110 SMFS-U-CM-110 Mobile Filtration Systems SMFS-P and SMFS-U Introduction 2 Introduction STAUFF Filtration Technology offers a complete range of
More informationAtlas Copco Pneumatic Surface Drill Rig ROC 442PC. Tophammer Crawler Rig. Hole range mm (1 5 / / 2 )
Atlas Copco Pneumatic Surface Drill Rig ROC 442PC 3 8 Tophammer Crawler Rig Hole range 41 115 mm (1 5 / 8 4 1 / 2 ) ROC 442PC the Workmate A tophammer crawler rig for 41 115 mm (1 5 /8 4 1 /2 ) holes.
More informationADVANCED HYDRAULIC TECHNOLOGIES ENGINEERED TO MOVE
ENGINEERED TO MOVE 1860 ESTABLISHED 1913 HAMWORTHY ENGINEERING ESTABLISHED ADVANCED HYDRAULIC TECHNOLOGIES Outstanding Performance on a Global Scale 1928 EG BISHOP ESTABLISHED 1959 POWAUTO FORMED 1993
More informationTerex Minerals Processing Systems JW SERIES JAW CRUSHERS
Terex Minerals Processing Systems JW SERIES JAW CRUSHERS DESIGNED TO DELIVER Terex JW Series We have been manufacturing jaw crushers for over 120 years and have gained a well-known reputation for producing
More informationOur experience is the protection for your installation
Katalog 2008 Catalogue 2008 Our experience is the protection for your installation SSK-type fuses: 10 years of highly efficient transformer protection in electric circuits Our Protection. Your Benefit.
More informationCeram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it.
2 Features Valve options Accessories Ceram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it. The secret s a ceramic seal. Inside the valve a pair
More informationConstant-filled fluid coupling with valve control Types TV F
Constant-filled fluid coupling with valve control Types TV F Voith Turbo fluid couplings with valve control: Putting traction on the chain Because of the harsh operating conditions underground, AFC drives
More informationoffshore power Caterpillar Global Petroleum
offshore power Caterpillar Global Petroleum PROVEN RELIABILITY AND DURABILITY With over 60 years of petroleum power experience and everything from small generator sets to offshore drilling modules. Caterpillar
More informationINTRODUCTION HISTORY. Enfocus Software - Customer Support
INTRODUCTION Address : No. 7-2, San-Hu Li, Yangmei City 32669, Taoyuan, Taiwan Date of Incorporation : January 11, 1966 Capital : NT$362 Million (US$ 11 Million) President : Ming-Yih Cheng Products: Mining
More informationBucket Elevator Belt Bucket Conveyor
Bucket Elevator TD belt bucket conveyor is suitable for density less than.5t/m3 lump, granular material such as coal, cement, fertilizer, sand, grain, etc.belt bucket conveyor has two types of bucket:
More informationJW SERIES WORLD JAW. Terex Minerals Processing Systems
JW SERIES WORLD JAW Terex Minerals Processing Systems DESIGNED TO DELIVER Terex JW World Jaw We have been manufacturing jaw crushers for 120 years and over this period have gained a reputation for producing
More informationSTAUFF STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters SMPF FILTRATION TECHNOLOGY
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, 24-26 Doyle Avenue,
More informationPAGE 1. Belt Cleaners
PAGE 1 Belt Cleaners BAM Conveyor Products specialize in the manufacture of a comprehensive range of high quality conveyor accessories and polyurethane components. Our engineering and manufacturing expertise,
More informationAlberto Castagnoli Ansaldo STS Business Development Transportation Solutions BU
An Innovative Solution for a Sustainable Urban Mobility: Tram Wave, The Ansaldo STS Catenary-Free Proposal Alberto Castagnoli Ansaldo STS Business Development Transportation Solutions BU The Challenge
More informationThird Generation Air Winch Series. 1,450 3,600 kg (3,200 8,000 lb)
Third Generation Air Winch Series 1,450 3,600 kg (3,200 8,000 lb) Untitled-1 1 1/20/2016 1:36:44 PM When Tough Just Isn t Enough Third Generation Air Winches 1,450 3,600 kg (3,200 8,000 lb) Since 1924,
More informationMSC VAC. Variable Speed Drive. Proudly 100% Australian Owned Australian Manufacturers & Distributors of Variable Speed Drives & Soft Starters
MSC - 3 1100VAC Variable Speed Drive Proudly 100% Australian Owned Australian Manufacturers & Distributors of Variable Speed Drives & Soft Starters Why Variable Speed Drive? Process automation & productivity
More informationFOODTOOLS MODEL: CS-8 CAKE SLABBER OPERATIONS MANUAL
FOODTOOLS MODEL: CS-8 CAKE SLABBER OPERATIONS MANUAL Instruction Manual: CS-8 Serial Number: Please provide this serial number when placing an order or making inquiries. Date: FoodTools Inc, OPERATIONS
More informationManagement Presentation. LMF - Leobersdorfer Maschinenfabrik
Management Presentation LMF - Leobersdorfer Maschinenfabrik 2015 LMF Product Portfolio and Business Segments Leobersdorfer Maschinenfabrik API Mobile & Industrial Compressor Systems After Sales & Services
More informationDräger PARAT Escape Hoods
Dräger PARAT Escape Hoods Dräger PARAT Escape hoods were developed in cooperation with users always with the focus on the fastest escape. Optimized operation and wearing comfort, a robust housing and tested
More informationTS 83. Easy-action Door Closer
TS 83 Easy-action Door Closer DORMA TS 83 Easy-action Door Closer Easy-action door closer with thinking backcheck Easy to fix and even easier to adjust. The door closer for almost every door size and application.
More informationOptimum design and performance Aluminium Trailer Cranes
Optimum design and performance Aluminium Trailer Cranes Optimum design and powerful drive unit trend-setting manoeuvring drive uncompromising durability future-proof and environmentally friendly stable
More informationMachines. AV2-2 Tandem Vibrating Rollers t. Courtesy of Machine.Market
Machines AV2-2 Tandem Vibrating Rollers 2. t www.aann-group.com 2 Smart Concept of the AV2-2 Vibrating Rollers The AV2-2 Series of Tandem Vibrating Rollers are universal rollers designed for the use at
More informationSandvik VSI Crushers new CV200 series
Sandvik VSI Crushers new CV200 series We have listened to our customers At Sandvik, we have established ourselves as market leaders in autogenous VSI crushing. In order to maintain our market lead, we
More information2017 MODEL INFORMATION
2017 MODEL INFORMATION OVERVIEW ----------------------- P.2 KEY FEATURES ------------------ P.3 COLOUR(S) ---------------------- P.5 SPECIFICATIONS ---------------- P.6 MODEL NAME MARKETING CODE Version:
More informationPowerscreen Warrior Deck Heavy Duty Incline Screen. Specification - Rev /01/2017
Powerscreen Warrior 2400 2 Deck Heavy Duty Incline Screen Specification Three Way Split Two Way Split Total weight 46,200kg ( 101,853lbs)* 43,000kg (94,779 lbs)* Transport Length 17.3m (56 10 ) 17.2m (56
More informationCLEATED INCLINE CONVEYOR OPERATION MANUAL
CLEATED INCLINE CONVEYOR OPERATION MANUAL SERIAL NO. DATE OF MANUFACTURE EQUIPMENT DESCRIPTION CLEATED INCLINE CONVEYOR The Cleated Incline Conveyor is a portable belted feed device. It is designed to
More informationMICHELIN EARTHMOVER & INDUSTRIAL TIRES
MICHELIN EARTHMOVER & INDUSTRIAL TIRES INNOVATION Since 1959, Michelin has been rolling out innovations for Earthmover customers 1959: Michelin creates the first Earthmover radial tire. 1977: Opening of
More informationGas/Hydraulic Valve Operators. Safe and Efficient Gas Pipeline Control
Valve Operators Safe and Efficient Gas Pipeline Control Design and Construction Emerson Process Management Valve Automation is recognized worldwide for the reliability of its actuators under the most demanding
More informationHighwall Mining System
Highwall Mining System Highwall Miner: Bridging the Gap Linking underground and surface mining operations, the Cat highwall mining system is a testament to versatile mining equipment. It offers a safe
More informationPM-565B. Cold Planer. Cat 3408E HEUI Diesel Engine Gross Power 466 kw 625 hp Standard Cutting Width 2100 mm 83" Maximum Cutting Depth 305 mm 12"
PM-565B Cold Planer Cat 3408E HEUI Diesel Engine Gross Power 466 kw 625 hp Standard Cutting Width 2100 mm 83" Maximum Cutting Depth 305 mm 12" Caterpillar 3408E Turbocharged Diesel Engine Dependable Caterpillar
More informationKaltfräse Cold milling W 200 machine W 100 / W 100i
Technische Technical specifi Daten cation Kaltfräse Cold milling W 200 machine W 100 / W 100i Technical specification Cold milling machine W 100 und W 100i Milling drum Milling width 1,000 mm Milling depth
More informationInsulation Technologies for Stationary Power Generation. Made in Germany.
Automotive On-Highway Off-Highway Marine Oil & Gas Power Generation Power Generation Insulation Technologies for Stationary Power Generation. Made in Germany. Efficiency Durability Maintenance Life Cycle
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. TEIP11 I/P signal converter for standard signals
ABB MEASUREMENT & ANALYTICS DATA SHEET TEIP11 I/P signal converter for standard signals 2 TEIP11 I/P SIGNAL CONVERTER FOR STANDARD SIGNALS DS/TEIP11-EN REV. D Flow in air pressure Proven and reliable concept
More informationTechnical specification Cold milling machine W 2200
Technical specification Cold milling machine W 2200 Technical specification Cold milling machine W 2200 Milling width max. Milling depth * 1 7 3 (2,200 mm) 0 14 (0 350 mm) Milling drum Tool spacing 15
More information