Catalog LV 1 Add-On October sentron CIRCUIT-BREAKERS. 3VL Molded Case Circuit-Breakers approved according to UL 489 up to 1600 A

Size: px
Start display at page:

Download "Catalog LV 1 Add-On October sentron CIRCUIT-BREAKERS. 3VL Molded Case Circuit-Breakers approved according to UL 489 up to 1600 A"

Transcription

1 Catalog LV 1 Add-On October 2006 sentron CIRCUIT-BREAKERS 3VL Molded Case Circuit-Breakers approved according to UL 489 up to 00 A

2 Related catalogs Contents Low-Voltage Controls and Distribution SIRIUS SENTRON SIVACON Order No. Catalog E86060-K1002-A101-A Technical Information E86060-T1002-A101-A Industrial Communication Industrial Communication for Automation and Drives Order No. E86060-K6710-A101-B LV 1 LV 1 T IK PI Systems Controls Contactors and contactor assemblies, solid-state switching devices Protection equipment Load feeders, motor starters and soft starters Monitoring and control devices Detecting devices Commanding and signaling devices Transformers Power supplies ALPHA FIX terminal blocks Planning and configuration with SIRIUS SIVACON busway and cubicle systems SENTRON switching and protection devices for power distribution Air circuit-breakers, molded case circuit-breakers, switch disconnectors Planning, design and management with SIMARIS BETA modular installation devices PROFINET/Industrial Ethernet Industrial Mobile Communicaton PROFIBUS to IEC 61158/EN SIMATIC ET 200 distributed I/Os AS-Interface to EN 50295/IEC Remote operation with SINAUT Telecontrol Routers ECOFAST system SICUBE System Cubicles and Cubicle Air-Conditioning Order No. E86060-K1920-A101-A LV 50 System cubicles Cubicle modifications Cubicle expansion Accessories Special cubicles Cubicle solutions in practice Cubicle air-conditioning Special colors SIDAC Reactors and Filters Order No. E86060-K2803-A101-A LV 60 Commutating reactors for converters Mains reactors for frequency converters Iron-core output reactors Ferrite output reactors Iron-core smoothing reactors Smoothing air-core reactors Filter reactors Application-specific reactors Radio interference suppression filters dv/dt filters Sinewave filters SIVACON 8PS Busway systems CD-K, BD01, BD2 up to 1250 A Order No. E86060-K1870-A101-A LV 70 Busway systems, Overview CD-K system (25 A to 40 A) BD01 system (40 A to 0 A) BD2 system (0 A to 1250 A) Automation & Drives The A&D Offline Mall CD-ROM E86060-D4001-A110-C DVD E86060-D4001-A510-C CA 01 All Automation and Drives products, including those in the catalogs listed above. A&D Mall Internet http// automation/mall All Automation and Drives products, including those in the catalogs listed above. Catalog PDF Internet http// siemens.com/cd All Catalogs of the Low-Voltage Controls available as downloadable PDF. Registered trademarks Technical Assistance All product designations may be registered trademarks or product names of Siemens AG or other supplying companies. Third parties using these trademarks or product names for their own purposes may infringe upon the rights of the trademark owners. Further information about low-voltage controls is available on the Internet at http// Expert technical assistance for Low-voltage controls and electrical installation. Tel. +49 (9 11) Fax +49 (9 11) technicalassistance@siemens.com

3 SENTRON 3VL Molded Case Circuit-Breakers approved according to UL 489 to 00 A Catalog LV 1 Add-On 10/ Introduction 2 Systems 12 3 Controls Contactors and contactor assemblies 11 Supply Power supplies Connecting with ALPHA ALPHA FIX terminal blocks 13 Engineering Software Planning and configuration with SIRIUS Invalid Catalog LV 1 Add-On 04/2006 Contact your local Siemens representative for further information Siemens AG 2006 F u n k t i o n e n 4 Solid-state switching devices 14 5 Protecting Protection equipment 6 Starting Load feeders, motor starters and soft starters 15 Distributing with SIVACON SIVACON power distribution boards, busway and cubicle systems Switching and Protecting with SENTRON Air circuit-breakers Molded case circuit-breakers The products and systems listed in this catalog are distributed/ manufactured using a certified quality management system which complies with EN ISO 9001 (Certificate Register Nos. can be found in the appendix). The certificates are recognized in all IQ Net countries. 7 Monitoring and Control Monitoring and control devices 8 Detection Detecting devices 17 Switch disconnectors 18 Engineering Software Planning, design and management 9 Commanding and Signaling 19 Protecting with BETA Commanding and signaling devices BETA modular installation devices s 10 Supply Transformers 20 Appendix Siemens LV /1

4 Niederspannungs-Schalttechnik Explanations Delivery times (DT) } Preferred type A 2 working days B 1 week C 3 weeks D 6 week X on request Price units (PU) Preferred types are available immediately from stock, i.e. are dispatched within 24 hours. Normal quantities of the products are usually delivred within the specified time following receipt of your order at our branch. In exceptional cases, the actual delivery period may differ from that specified. The delivery periods apply up to the ramp at Siemens AG (products ready for dispatch). The transport times depend on the destination and type of shipping. The standard transport time for Germany is 1 day. The delivery times specified here represent the state of 10/2006. They are permanently optimized. Up-to-date information can be found at http// The price unit defines the number of units, sets or meters to which the specified price and weight apply. Packaging sizes (PS) Price groups (PG) Weight Dimensions The packaging size defines the number, e.g. of units, sets or meters, for outer packaging. Only the quantity defined by the packaging size or a multiple thereof can be ordered! Each product is assigned to a price group. The defined weight in kg refers to the price unit (PU). All dimensions in mm. Multi-unit packaging and recyclable packaging, on request 2 Siemens LV 1 Add-On 10/2006

5 SENTRON Switching and Protection Devices Molded Case Circuit-Breakers Catalog 3VL Molded Case Circuit-Breakers Introduction /2 - Overview General data /4 - Benefits /5 - Application 3-pole /6 - Selection and ordering data Options /17 - Selection and ordering data Accessories/spare parts /19 - Selection and ordering data Technical Information 3VL Molded Case Circuit-Breakers General data /42 - Design /49 - Function /52 - Configuration /53 - Technical specifications Project planning aids /57 - Characteristic curves /57 - Dimensional drawings /88 - Schematics Appendix /91 Siemens Contacts Worldwide /92 Customer Support /93 Metal Surcharges Conditions of Sale and Delivery Export Regulations Siemens LV 1 Add-On 10/2006

6 * SENTRON Switching and Protection Devices Molded Case Circuit-Breakers 3VL Molded Case Circuit-Breakers Introduction Overview Type VL150 UL, DG frame VL250 UL, FG frame VL400 UL, JG frame 3VL molded case circuit-breakers Rated current I 1) n A 30 to to to 400 at 40 C ambient temperature Number of poles Rated operational voltage U e (UL) AC 50/60 Hz DC 2) Overcurrent trip unit Thermal-magnetic Solid-state LCD ETU Dimensions ), # ' A B C D V V mm mm mm mm Switch-off capacities Standard switching capacity N Up to 240 V AC Up to 480 V AC Up to 600 V AC ka ka ka Up to 250 V DC 3) Up to 500 V DC 3) Up to 600 V DC 3) ka ka ka Switching capacity I cu /I cs RMS value according to IEC Up to 240 V AC Up to 415 V AC Up to 690 V AC ka ka ka 65/65 40/40 12/6 65/65 40/40 12/6 65/65 45/45 12/6 Up to 250 V DC 3) ka 30/30 30/30 30/30 High switching capacity H Up to 240 V AC Up to 480 V AC Up to 600 V AC Up to 250 V DC 3) Up to 500 V DC 3) Up to 600 V DC 3) Switching capacity I cu /I cs RMS value according to IEC Up to 240 V AC Up to 415 V AC Up to 690 V AC available ka ka ka ka ka ka ka ka ka /75 70/70 12/6 -- Not available 1) Rated value 80 % according to UL 489, 100 % according to IEC /75 70/70 12/ /75 70/70 15/8 Up to 250 V DC 3) ka 30/30 30/30 30/30 Very high switching capacity L Up to 240 V AC Up to 480 V AC Up to 600 V AC Up to 250 V DC 3) Up to 500 V DC 3) Up to 600 V DC 3) Switching capacity I cu /I cs RMS value according to IEC Up to 240 V AC Up to 415 V AC Up to 690 V AC ka ka ka ka ka ka ka ka ka / /75 12/ / /75 12/ / /75 15/8 Up to 250 V DC 3) ka 30/30 30/30 30/30 /2 Siemens LV 1 Add-On 10/2006

7 SENTRON Switching and Protection Devices Molded Case Circuit-Breakers 3VL Molded Case Circuit-Breakers Introduction VL400X UL, LG frame VL800 UL, MG frame VL1200 UL, NG frame VL00 UL, PG frame 3VL molded case circuit-breakers according to UL 489 up to 00 A 150 to to to to /65 45/45 12/6 65/65 50/50 20/10 65/35 50/25 20/10 65/35 50/25 20/10 30/30 30/30 30/30 30/ /75 70/70 15/8 100/75 70/70 30/15 100/50 70/35 30/15 100/50 70/35 30/15 30/30 30/30 30/30 30/ / /75 15/8 200/ /75 35/17 2) Rated DC voltage applies only to circuit-breakers with thermal-magnetic trip unit. 200/ /50 35/17 200/ /50 35/17 30/30 30/30 30/30 30/30 3) The maximum permitted DC voltage for each conducting path needs to be taken into account for DC switching applications. Siemens LV 1 Add-On 10/2006 /3

8 3VL Molded Case Circuit-Breakers General data Benefits The compact design of the SENTRON 3VL circuit-breakers coupled with excellent characteristics fulfills the high demands of today's electrical distribution systems. These circuit-breakers offer a broad product range, improved technology, space savings and easy operation. They are available both in thermal-magnetic (50 A to 00 A) and in solid-state versions (30 A to 00 A). /4 Siemens LV 1 Add-On 10/2006

9 General data Application The different versions of SENTRON 3VL UL circuit-breakers are suitable for the following applications Incoming and outgoing circuit-breakers in distribution systems Switching and protection devices for motors (motor protection together with contactor and motor protection relay), transformers and capacitors Disconnector units with features for stopping and switching off in an emergency (main control switches and EMERGENCY- STOP switches) in conjunction with lockable rotary operating mechanisms. The SENTRON 3VL UL circuit-breakers are available in the following versions 1. For system protection (in 3-pole versions) The overload and short-circuit releases are designed for the protection of cables, leads and non-motor loads. 2. For starter combinations (in 3-pole version) These circuit-breakers are used both for short-circuit protection as well as for isolating functions, which may be required in starter combinations consisting of circuit-breakers, overload relays and motor contactors. These circuit-breakers exclusively feature adjustable, instantaneous short-circuit releases. 3. As non-automatic air circuit-breakers (in 3-pole versions) These circuit-breakers can be used as feeder circuitbreakers, main control switches or disconnectors without overload protection. They incorporate an integrated shortcircuit self-protection system. Standards and specifications SENTRON 3VL UL circuit-breakers comply with UL 489, CSA (CSA C22.2), IEC/EN , isolating features according to IEC , EN , NOM (NMX-J-266-ANCE-2002) on request. Please contact Siemens for details of other standards. Operating conditions The SENTRON 3VL UL circuit-breakers are designed for operation in enclosed areas. Siemens LV 1 Add-On 10/2006 /5

10 3-pole Selection and ordering data Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R Operational current of the instantaneous short-circuit trip unit "I" I i DT I cu up to 35 ka at 480 V, standard switching capacity N see "Overview". Order No. Price PU PS* PG Weight Order No. supplement (UNIT, required, SET, M) see page /17 A A A kg VL150 UL (DG frame) to VL00 UL (PG frame) fixed-mounted circuit-breakers, thermal-magnetic overcurrent trip units System protection, TM, LI function with permanently set thermal overload trip unit, adjustable short-circuit trip unit Connection type Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages /25 to /29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages /30 to /34. VL150 UL, DG frame B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit VL250 UL, FG frame B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit VL400 UL, JG frame B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit VL400X UL, LG frame B 3VL KN unit B 3VL KN unit B 3VL KN unit VL800 UL, MG frame B 3VL KN unit 113 on req B 3VL KN unit 113 on req B 3VL KN unit 113 on req. VL1200 UL, NG frame B 3VL KN unit 113 on req B 3VL KN unit 113 on req B 3VL KN unit 113 on req B 3VL KN unit 113 on req. VL00 UL, PG frame B 3VL KN unit 113 on req B 3VL KN unit 113 on req B 3VL81-1KN unit 113 on req. /6 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

11 3-pole DT I cu up to 65 ka at 480 V, high switching capacity H DT I cu up to 100 ka at 480 V, very high switching capacity L Order No. Order No. supplement required, see page /17 Price PU (UNIT, SET, M) PS* PG Weight kg Order No. Order No. supplement required, see page /17 Price PU (UNIT, SET, M) PS* PG Weight kg B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL KN unit 113 on req. B 3VL81-2KN unit 113 on req. B 3VL81-3KN unit 113 on req. * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /7

12 3-pole Type Rated current I n Operational current of the instantaneous short-circuit trip unit "I" I i DT I cu up to 35 ka at 480 V, standard switching capacity N see "Overview". Order No. Price PU PS* PG Weight Order No. supplement (UNIT, required, SET, M) see page /17 A A kg VL150 UL (DG frame) to VL00 UL (PG frame) fixed-mounted circuitbreakers, magnetic and solid-state overcurrent trip units Circuit-breakers for starter combination, I-function (motor circuit protector) without overload trip unit, with adjustable short-circuit trip unit Connection type Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages /25 to /29 and under NSE0_00707 "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages /30 to /34. VL150 UL, DG frame VL250 UL, FG frame VL400 UL, JG frame VL400X UL, LG frame VL800 UL, MG frame VL1200 UL, NG frame Non-automatic molded case circuit-breakers without overload release, with permanently set short-circuit releases (for intrinsic protection only) Connection type Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages /25 to /29 and under NSE0_00708 "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages /30 to /34. VL150 UL, DG frame VL250 UL, FG frame VL400 UL, JG frame VL400X UL, LG frame VL800 UL, MG frame VL1200 UL, NG frame VL00 UL,PG frame /8 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

13 3-pole DT I cu up to 65 ka at 480 V, high switching capacity H DT I cu up to 100 ka at 480 V, very high switching capacity L Order No. Order No. supplement required, see page /17 Price PU (UNIT, SET, M) PS* PG Weight kg Order No. Order No. supplement required, see page /17 Price PU (UNIT, SET, M) PS* PG Weight kg B 3VL KJ unit B 3VL KK unit B 3VL KL unit B 3VL KJ unit B 3VL KK unit B 3VL KL unit B 3VL KJ unit B 3VL KK unit B 3VL KJ unit B 3VL KK unit B 3VL KK unit 113 on req. -- B 3VL KK unit 113 on req. -- B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL KE unit B 3VL81-2KE unit B 3VL81-3KE unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /9

14 3VL Molded Case Circuit-Breakers 3-pole Type Rated Set current of Operating S function DT I cu up to 35 ka at 480 V, standard switching capacity N current the inversetime delayed instan- delayed short- current of the (short-time see "Overview". I n Order No. Price PU PS* PG Weight overload trip taneous circuit trip unit) unit "L" short-circuit I sd Order No. supplement (UNIT, SET, M) I R trip unit "I" required, I i see page /17 A A A A kg VL150 UL (DG frame) to VL00 UL (PG frame) fixed-mounted circuitbreakers, solid-state overcurrent trip units System and generator protection L S I NSE0_00692 L = Overload S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous with solid-state overcurrent trip unit ETU (model 545) LSI function (t sd = 0 to 0.5 s) Connection type Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages /25 to /29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages /30 to /34. VL150 UL, DG frame x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit VL250 UL, FG frame x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit VL400 UL, JG frame x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit VL400X UL, LG frame x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit VL800 UL, MG frame x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit VL1200 UL, NG frame x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit x I n x I R B 3VL GE unit VL00 UL, PG frame x I n x I R B 3VL GE unit x I n x I R B 3VL81-1GE unit /10 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

15 3-pole DT I cu up to 65 ka at 480 V, high switching capacity H DT I cu up to 100 ka at 480 V, very high switching capacity L Order No. Order No. supplement required, see page /17 Price PU (UNIT, SET, M) PS* PG Weight Order No. Order No. supplement required, see page /17 Price PU (UNIT, SET, M) PS* PG Weight kg kg B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL GE unit B 3VL81-2GE unit B 3VL81-3GE unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /11

16 3-pole Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R DT I cu up to 35 ka at 480 V, standard switching capacity N see "Overview". Order No. Price PU PS* PG Weight Order No. supplement see (UNIT, required, page / SET, M) see page /17 A A kg VL150 UL (DG frame) to VL00 UL (PG frame) fixed-mounted circuit-breakers, up to 00 A, solid-state overcurrent trip units Circuit-breakers with solid-state overcurrent trip unit ETU Connection type Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages /25 to /29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages /30 to /34. VL150 UL, B 3VL @@ unit DG frame B 3VL @@ unit B 3VL @@ unit VL250 UL, B 3VL @@ unit FG frame B 3VL @@ unit B 3VL @@ unit VL400 UL, B 3VL @@ unit JG frame B 3VL @@ unit VL400X UL, B 3VL @@ unit LG frame B 3VL @@ unit VL800 UL, B 3VL @@ unit MG frame B 3VL @@ unit VL1200 UL, B 3VL @@ unit NG frame B 3VL @@ unit B 3VL @@ unit VL00 UL, B 3VL @@ unit PG frame B 3VL81-1@@ unit Order No. ETU trip units, 3-pole versions supplements L System protection with LI function G B NSE0_00943 L I System protection with LIG function for 4-wire three-phase systems 1) G D G I NSE0_00693 L S I System and generator protection with LSI function G E NSE0_00692 G L S I System and generator protection with LSIG function for 4-wire three-phase systems 1) G H NSE0_00694 L = Overload S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous G = Ground-fault protection 1) Vectorial summation current formation of the currents. /12 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

17 3-pole DT I cu up to 65 ka at 480 V, high switching capacity H DT I cu up to 100 ka at 480 V, very high switching capacity L Order No. Order No. supplement required, see page /17 Price PU see (UNIT, page / SET, M) PS* PG Weight kg Order No. Order No. supplement required, see page /17 Price PU see (UNIT, page / SET, M) PS* PG Weight kg B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL81-2@@ unit B 3VL81-3@@ unit Order No. supplements Order No. supplements G B G B G D G D G E G E G H G H * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /13

18 3-pole Type Rated current I n Set current of the inverse-time delayed overload trip unit "L" I R DT I cu up to 35 ka at 480 V, standard switching capacity N see "Overview". Order No. Price PU PS* PG Weight Order No. supplement see (UNIT, required, page / SET, M) see page /17 A A kg VL150 UL (DG frame) to VL00 UL (PG frame) fixed-mounted circuit-breakers, up to 00 A, solid-state overcurrent trip units Circuit-breakers with solid-state overcurrent trip unit ETU Connection type Circuit-breakers without preassembled terminals, terminals must be ordered under "Accessories", "Plug-in versions/withdrawable versions", pages /25 to /29 and under "Accessories", "Connection parts for fixed-mounted circuit-breakers", pages /30 to /34. VL150 UL, B 3VL @@ unit DG frame B 3VL @@ unit B 3VL @@ unit VL250 UL, B 3VL @@ unit FG frame B 3VL @@ unit B 3VL @@ unit VL400 UL, B 3VL @@ unit JG frame B 3VL @@ unit VL400X UL, B 3VL @@ unit LG frame B 3VL @@ unit VL800 UL, B 3VL @@ unit MG frame B 3VL @@ unit VL1200 UL, B 3VL @@ unit NG frame B 3VL @@ unit B 3VL @@ unit VL00 UL, B 3VL @@ unit PG frame B 3VL81-1@@ unit Order No. supplements LCD ETU trip unit, 3-pole version L S I System protection with LI/LS/LSI function J H NSE0_00696 L System protection with LSIG function for 4-wire three-phase systems 1)2) J M S G I NSE0_00697 L = Overload S = Short-circuit protection, short-time delayed I = Short-circuit protection, instantaneous G = Ground-fault protection 1) External current transformer required in addition (on request). 2) Vectorial summation current formation of the currents. /14 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

19 3-pole. DT I cu up to 65 ka at 480 V, high switching capacity H DT I cu up to 100 ka at 480 V, very high switching capacity L Order No. Order No. supplement required, see page /17 Price see page / PU (UNIT, SET, M) PS* PG Weight kg Order No. Order No. supplement required, see page /17 Price PU see (UNIT, page / SET, M) PS* PG Weight kg B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL @@ unit B 3VL81-2@@ unit B 3VL81-3@@ unit Order No. supplements Order No. supplements J H J H J M J M * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /15

20 3-pole Order No. supplement Type (for complete Order No., VL150 UL see pages /12 to /15) (DG frame) 3VL...-. G B VL250 UL (FG frame) VL400 UL (JG frame) VL400X UL (LG frame) VL800 UL (MG frame) Rated current I n 60 A 100 A 150 A 100 A 150 A 250 A 250 A 400 A 400 A 600 A 600 A 800 A Price G D G E G H J H J M Order No. supplement (for complete Order No., see pages /12 to /15) G B VL1200 UL (NG frame) VL00 UL (PG frame) 800 A 1000 A 1200 A 1200 A 00 A Price G D G E G H J H J M Standard switching capacity N High switching capacity H Very high switching capacity L / Siemens LV 1 Add-On 10/2006

21 Options Selection and ordering data 1. Order No. supplement Undervoltage or shunt trip unit, wiring directly to accessories Rated control supply voltage U s /frequency AC 50/60 Hz DC Order No. supplement 3VL @@.. Circuit-breakers Type VL150 UL (DG frame) to VL400X UL (LG frame) 1) VL800 UL (MG frame) to VL00 UL (PG frame) Additional price Additional price Without auxiliary trip units 0 A without without With undervoltage trip units Only right pole V AC V DC 1) N P 1) 1) U 1) V R 1) 1) S 24 5) 1) -- 2 D G 1) 1) H 1) M Q 1) 1) J 1) K L 1) 600 5) 1) -- 2 T With shunt trip units Only right pole V AC V DC 1) C 1) J K 1) 1) Q 1) M R 1) 1) T 1) V 2. Order No. supplement Auxiliary switches (HS) and alarm switches (AS), left/right pole, directly wired to accessories Equipment Order No. supplement Circuit-breakers Type HS = 1 NO or 1 NC switch block 3VL VL150 UL (DG frame) to VL800 UL (MG frame) to AS = 1 NO switch block VL400X UL (LG frame) VL00 UL (PG frame) Additional price Additional price without auxiliary/alarm switches A 0 without without 2 HS (1 NO/1 NC) 3) B 1 2) -- 4 HS (2 NO/2 NC) C ) 2 HS (1 NO/1 NC) + 1 AS (1 NO) D HS (1 NO/1 NC) + 1 AS (1 NO) 4) E Not available 1) For SENTRON VL150 UL (DG frame)/vl250 UL (FG frame) circuit-breakers with solid-state overcurrent trip units, the only option is one undervoltage trip unit or shunt trip unit, or one auxiliary/alarm switch combination. 2) Except for mounting in the left accessory sub-section of the SENTRON VL150 UL (DG frame)/vl250 UL (FG frame) circuit-breakers with electronic overcurrent trip units, since this sub-section is occupied by the tripping solenoid. Only one auxiliary trip unit or one auxiliary/alarm switch combination can be installed on the right-hand side. 3) With mounting adapter up to 3 HS. 4) With mounting adapter up to 2 HS +2 AS. 5) On request. Siemens LV 1 Add-On 10/2006 /17

22 Options When ordering, add "-Z" to the complete Order No. and add the relevant order code(s). For fixed-mounted circuit-breakers (wired in factory) Wiring for internal accessories (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) with connecting cables (2 m long) brought out at the rear Wiring for motorized operating mechanism (Motorized operating mechanism not included in the scope of supply, to order see pages /22 to /24) with connection cables (2 m long), brought out at the top on VL150 UL (DG frame) to VL400X UL (LG frame) or brought out at the right-hand side on VL800 UL (MG frame) to VL00 UL (PG frame) Motorized operating mechanism (24 V DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanism (42-48 V AC/DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanism (60 V AC/DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanism ( V AC/DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) Motorized operating mechanism ( V AC/DC) mounted on the circuit-breaker (motorized operating mechanism included in scope of supply) with wiring for internal accessories of the circuit-breaker with connecting cables (2 m long) brought out at the rear, (auxiliary switches, alarm switches, auxiliary trip units not included in scope of supply) VL150 UL (DG frame) to VL00 UL (PG frame) VL150 UL (DG frame) to VL00 UL (PG frame) VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL00 UL (PG frame) VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL00 UL (PG frame) VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL00 UL (PG frame) VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL00 UL (PG frame) VL150 UL (DG frame) to VL250 UL (FG frame) VL400 UL (JG frame) to VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) to VL00 UL (PG frame) Order code çòô çóô èôö èöô èøò èóó èôô Order No. with " Z" VL Z and additional order Code for further @@@ Additional price /18 Siemens LV 1 Add-On 10/2006

23 Accessories/spare parts Selection and ordering data Wiring directly at accessories DT For VL150 UL (DG frame) to VL400X UL (LG frame) Order No. Price PU (UNIT, SET, M) PS* PG Weight kg Auxiliary switches and auxiliary trip units 3-pole Auxiliary switches (HS) and alarm switches (AS) for subsequent fitting Kits Mounting side 2 HS (1 NO + 1 NC) N, left 1), right B 3VL AB unit HS (2 NO + 2 NC) N, left, right -- 2 HS (1 NC + 1 NO) Left, right 3) B 3VL AD unit AS (1 NO) (kit) NSE0_00684 Left -- Additional auxiliary switch/alarm switch combinations see page /21. 3VL A.01 Shunt trip units 2) for subsequent fitting V AC V DC Mounting side right pole only B 3VL SC unit right pole only B 3VL SJ unit right pole only B 3VL SK unit right pole only B 3VL SQ unit right pole only B 3VL SM unit right pole only B 3VL SR unit right pole only B 3VL ST unit right pole only B 3VL SV unit Undervoltage trip unit for subsequent fitting V AC V DC Mounting side right pole only B 3VL UN unit right pole only B 3VL UP unit right pole only B 3VL UU unit right pole only B 3VL UV unit VL S.01, 24 4) -- right pole only B 3VL UD unit VL U right pole only B 3VL UG unit 113 0, right pole only B 3VL UR unit right pole only B 3VL UM unit right pole only B 3VL UH unit right pole only B 3VL US unit right pole only B 3VL UQ unit right pole only B 3VL UJ unit right pole only B 3VL UK unit right pole only B 3VL UL unit ) -- right pole only B 3VL UT unit NSE0_ ) Except for mounting in the left accessory sub-section of the SENTRON VL150 UL (DG frame)/vl250 UL (FG frame) circuit-breakers with solid-state overcurrent trip units, since this sub-section is occupied by the tripping solenoid. 2) Shunt trip unit with disconnection contact (3SB3 for ON/OFF position) not isolated (see "Schematics"). 3) For VL400 UL (JG frame)/vl400x UL (LG frame) Unsuitable for mounting in the right-hand accessory sub-section. The 3VL AB01 installation kit with auxiliary switches only is recommended. 4) On request * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /19

24 Accessories/spare parts Wiring directly at accessories DT For VL800 UL (MG frame) to VL00 UL (PG frame) Order No. Price PU (UNIT, SET, M) PS* PG Weight kg Auxiliary switches and auxiliary trip units 3-pole Auxiliary switches (HS) and alarm switches (AS) for subsequent fitting Kits Mounting side 2 HS (1 NO + 1 NC) N, left, right -- 4 HS (2 NO + 2 NC) N, left, right B 3VL AC unit HS (1 NC + 1 NO) Left, right AS (1 NO) (kit) NSE0_00684 Left B 3VL AE unit VL A.01 Additional auxiliary switch/alarm switch combinations see page /21. Shunt trip units 1) for subsequent fitting V AC V DC Mounting side Right pole only A 3VL SC unit Right pole only A 3VL SJ unit Right pole only A 3VL SK unit Right pole only A 3VL SQ unit Right pole only A 3VL SM unit Right pole only A 3VL SR unit Right pole only A 3VL ST unit Right pole only A 3VL SV unit Undervoltage trip unit for subsequent fitting V AC V DC Mounting side Right pole only A 3VL UN unit Right pole only A 3VL UP unit Right pole only B 3VL UU unit Right pole only B 3VL UV unit ) -- Right pole only B 3VL UD unit VL S.01, Right pole only B 3VL UG unit VL U Right pole only B 3VL UR unit Right pole only B 3VL UM unit Right pole only B 3VL UH unit Right pole only B 3VL US unit Right pole only B 3VL UQ unit Right pole only B 3VL UJ unit Right pole only B 3VL UK unit Right pole only Right pole only -- NSE0_ ) Shunt trip unit with disconnection contact (3SB3 for ON/OFF position) not isolated (see "Schematics"). 2) On request. /20 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

25 Accessories/spare parts For circuitbreakers Maximum combination of auxiliary switches (HS) and alarm switches (AS) 1) Except for mounting in the left accessory sub-section of the SENTRON VL150 UL (DG frame)/vl250 UL (FG frame) with solid-state overcurrent trip unit. Only one auxiliary trip unit or one auxiliary/alarm switch combination can be installed on the right-hand side. DT Order No. Price PU (UNIT, SET, M) PS* PG Weight Type kg 3SB adapters and 3SB switching elements Mounting adapters for auxiliary and alarm switch combinations For installation in the left pole of the circuit-breaker VL150 UL (DG frame), up to 3 HS 1) B 3VL AH unit VL250 UL (FG frame), VL400 UL (JG frame), 2 HS + 1 AS 1)2) B 3VL AJ unit VL400X UL (LG frame) VL800 UL (MG frame), up to 4 HS B 3VL9 8-2AL unit VL1200 UL (NG frame), VL00 UL (PG frame) 2 HS + 2 AS B 3VL9 8-2AN unit For fitting in the right pole of the circuit-breaker VL150 UL (DG frame), up to 3 HS 1) B 3VL AH unit VL250 UL (FG frame), VL400 UL (JG frame), 2 HS + 1 AS 1)2) B 3VL AJ unit VL400X UL (LG frame) 2) VL800 UL (MG frame), up to 4 HS B 3VL9 8-2AL unit VL1200 UL (NG frame), VL00 UL (PG frame) 2 HS + 2 AS -- 2) For VL400 UL (JG frame)/vl400x UL (LG frame) 3VL AJ21 unsuitable for mounting in the right-hand accessory sub-section. For auxiliary/alarm switches DT Circuit-breaker PU Type VL150 UL (DG frame) to VL00 UL (PG frame) Order No. Price (UNIT, SET, M) PS* PG Weight kg Switch blocks for auxiliary and alarm switch combinations 1 NO B 3SB J 1 1 unit NC B 3SB K 1 1 unit For auxiliary switch or alarm switch combinations not included in the kits provided as standard, the mounting adapters specified can be ordered separately together with the required switching elements 1 HS or 1 AS with NO contact 3SB J 1 HS or 1 AS with NC contact 3SB K Note A maximum of 6 switch blocks (HS) are possible for each (VL150 UL (DG frame) to VL400X UL (LG frame)) circuit-breaker and a maximum of 8 switch blocks (HS) are possible for each (VL800 UL (MG frame) to VL00 UL (PG frame) circuitbreaker). Four 3SB3 auxiliary switching elements and one mounting adapter (right), suitable for VL800 UL (MG frame) to VL00 UL (PG frame) circuit-breakers. NSE0_00684 For retrofitting/for possible complements, see "Design", "Auxiliary Trip Units and Auxiliary Switches". * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /21

26 Accessories/spare parts Operating mechanisms NSE0_ VL9.00-3H.01 Version For VL150 UL (DG frame) to VL250 UL (FG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg 3-pole Front-operated rotary operating mechanisms For direct mounting on the circuit-breaker, without leading auxiliary switch Degree of protection IP30 1), black B 3VL HA unit EMERGENCY-STOP version Red knob, yellow indicator plate B 3VL HC unit Safety locks for installation by the customer, see pages /36 to /39. 3VL9.00-3H.01 NSE0_00711 Door-coupling rotary operating mechanisms, complete, installation in doors and covers Degree of protection IP65, including black knob with masking plate, indicator plate, removable door coupling, 300 mm extension shaft and front-operated rotary operating mechanism for the respective circuit-breaker B 3VL HF unit EMERGENCY-STOP version, Red knob, yellow indicator plate, without leading auxiliary switch B 3VL HG unit Safety locks for installation by the customer, see pages /36 to /39. 3VL9.00-3A.11 NSE0_00712 Leading auxiliary switches for installation in a front-operated rotary operating mechanism or door-coupling rotary operating mechanism Standard or EMERGENCY-STOP version "OFF after ON" Leading auxiliary switches when switching on 1 changeover contact with 1.5 m long cables B 3VL AS unit changeover contacts with 1.5 m long cables B 3VL AT unit "ON after OFF" Leading auxiliary switches when switching off 1 changeover contact with 1.5 m long cables B 3VL AU unit changeover contacts with 1.5 m long cables B 3VL AW unit VL9.00-3M.01 NSE0_007 Motorized operating mechanisms with spring energy store 2) Degree of protection IP30, with locking device for 3 padlocks, suitable for synchronizing 50/60 Hz V AC V DC B 3VL MJ unit B 3VL ML unit B 3VL MS unit B 3VL MN unit B 3VL MQ unit Toggle handle extensions -- Max Flex operating mechanisms, complete with operating mechanism, lever and Bowden wire Degree of protection NEMA 1, 3R, 12 Bowden cable length 0.9 m B 3VL JM unit Bowden cable length 1.2 m -- NSE0_ VL9.00-3JM01 1) IP40 with additional masking frame mounted on the door cut-out. 2) For safety lock as an installation kit for retrofitting, see pages /36 to /39. /22 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

27 Accessories/spare parts For VL400 UL (JG frame) to VL400X UL (LG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg For VL800 UL (MG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg B 3VL HA unit B 3VL HA unit B 3VL HC unit B 3VL HC unit B 3VL HF unit B 3VL HF unit B 3VL HG unit B 3VL HG unit B 3VL AS unit B 3VL AS unit B 3VL AT unit B 3VL AT unit B 3VL AU unit B 3VL AU unit B 3VL AW unit B 3VL AW unit B 3VL MJ unit B 3VL MJ unit B 3VL ML unit B 3VL ML unit B 3VL MS unit B 3VL MS unit B 3VL MN unit B 3VL MN unit B 3VL MQ unit B 3VL MQ unit B 3VL HN unit B 3VL HN unit B 3VL JM unit B 3VL JM unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /23

28 Accessories/spare parts Operating mechanisms NSE0_ VL9.00-3H.01 Version For VL1200 UL (NG frame) to VL00 UL (PG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg 3-pole Front-operated rotary operating mechanisms For direct mounting on the circuit-breaker, without leading auxiliary switch, degree of protection IP30 1), black B 3VL HA unit EMERGENCY-STOP version Red knob, yellow indicator plate B 3VL HC unit Safety locks for installation by the customer, see pages /36 to /39. 3VL9.00-3H.01 NSE0_00711 Door-coupling rotary operating mechanisms, complete, installation in doors and covers Degree of protection IP65, including black knob with masking plate, indicator plate, removable door coupling, 300 mm extension shaft and front-operated rotary operating mechanism for the respective circuit-breaker B 3VL HF unit EMERGENCY-STOP version, Red knob, yellow indicator plate, without leading auxiliary switch B 3VL HG unit Safety locks for installation by the customer, see pages /36 to /39. 3VL9.00-3A.11 NSE0_00712 Leading auxiliary switches for installation in a front-operated rotary operating mechanism or door-coupling rotary operating mechanism Standard or EMERGENCY-STOP version "OFF after ON" Leading auxiliary switches when switching on 1 changeover contact with 1.5 m long cables B 3VL AS unit changeover contacts with 1.5 m long cables B 3VL AT unit "ON after OFF" Leading auxiliary switches when switching off 1 changeover contact with 1.5 m long cables B 3VL AU unit changeover contacts with 1.5 m long cables B 3VL AW unit Motorized operating mechanisms 2) Degree of protection IP30, with locking device for 3 padlocks, not suitable for synchronizing 3VL9.00-3M.01 NSE0_007 50/60 Hz V AC V DC B 3VL MJ unit B 3VL ML unit B 3VL MS unit B 3VL MN unit B 3VL MQ unit Toggle handle extensions B 3VL HN unit Max Flex operating mechanisms, complete with operating mechanism, lever and Bowden wire Degree of protection NEMA 1, 3R, 12 Bowden cable length 0.9 m -- Bowden cable length 1.2 m B 3VL JM unit NSE0_ VL9.00-3JM01 1) IP40 with additional masking frame mounted on the door cut-out. 2) For safety lock as an installation kit for retrofitting, see pages /36 to /39. /24 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

29 Accessories/spare parts Version Plug-in versions/withdrawable versions 3-pole Plug-in base installation kits Complete with base plate, base, blade contacts for circuit-breakers, terminal covers for degree of protection IP20, fixing screws, trip pin For VL150 UL (DG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg NSE0_ VL9.00-4PA31 Rear-accessible terminals 3-pole B 3VL PA unit angle connecting adapters for rear connection, 3-pole A 3VL PE unit VL9.00-4PE31 Front-accessible terminals 3-pole B 3VL PC unit Withdrawable version installation kits Upgrade of the plug-in base installation kit to withdrawable version 3-pole B 3VL WF unit including side panels and racking mechanism. NSE0_ VL9.00-4WF31 NSE0_ VL9.00-4WA31 Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism Rear-accessible terminals 3-pole B 3VL WA unit Front-accessible terminals 3-pole B 3VL WC unit Blade contacts As replacement for converting fixed-mounted circuit-breakers into plug-in/withdrawable circuit-breakers, including trip pin 1 set = 6 units 3-pole B 3VL PS unit Trip pins and springs As replacement for plug-in/withdrawable A 3VL PF unit circuit-breaker Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuitbreakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling 1) with screw terminal) 8 terminals A 3VL PJ unit Position indicator switches (connected/disconnected position) for plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible B 3VL WL unit ) It is recommended to use a maximum of 2 auxiliary circuit plug-in systems per circuit-breaker ( terminals). * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /25

30 Accessories/spare parts Version Plug-in versions/withdrawable versions 3-pole Plug-in base installation kits Complete with base plate, base, blade contacts for circuit-breakers, terminal covers for degree of protection IP20, fixing screws, trip pin For VL250 UL (FG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg NSE0_ VL9.00-4PA31 Rear-accessible terminals 3-pole A 3VL PA unit angle connecting adapters for rear connection, 3-pole A 3VL PE unit VL9.00-4PE31 Front-accessible terminals 3-pole A 3VL PC unit Withdrawable version installation kits Upgrade of the plug-in base installation kit to withdrawable version 3-pole B 3VL WF unit including side panels and racking mechanism. NSE0_ VL9.00-4WF31 NSE0_ VL9.00-4WA31 Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism Rear-accessible terminals 3-pole B 3VL WA unit Front-accessible terminals 3-pole B 3VL WC unit Blade contacts As replacement for converting fixed-mounted circuit-breakers into plug-in/withdrawable circuit-breakers, including trip pin 1 set = 6 units 3-pole A 3VL PS unit Trip pins and springs As replacement for plug-in/withdrawable A 3VL PF unit circuit-breaker Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuit-breakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) 1) 8 terminals A 3VL PJ unit Position indicator switches (connected/disconnected position) for plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible B 3VL WL unit ) It is recommended to use a maximum of 2 auxiliary circuit plug-in systems per circuit-breaker ( terminals). 2) It is recommended to use a maximum of 3 auxiliary circuit plug-in systems per circuit-breaker (24 terminals). /26 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

31 Accessories/spare parts For VL400 UL (JG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg For VL400X (LG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg B 3VL PA unit B 3VL PA unit B 3VL PC unit B 3VL PC unit B 3VL WF unit B 3VL WF unit B 3VL WA unit B 3VL WA unit B 3VL WC unit B 3VL WC unit B 3VL PS unit B 3VL PS unit B 3VL PF unit B 3VL PF unit ) 2) B 3VL PJ unit B 3VL PJ unit B 3VL WL unit B 3VL WL unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /27

32 Accessories/spare parts Version Plug-in versions/withdrawable versions 3-pole Plug-in base installation kits Complete with base plate, base, blade contacts for circuit-breakers, terminal covers for degree of protection IP20, fixing screws, trip pin For VL800 UL (MG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg NSE0_ VL9.00-4PA31 Rear-accessible terminals 3-pole angle connecting adapters for rear connection, 3-pole -- 3VL9.00-4PE31 Front-accessible terminals 3-pole -- Withdrawable version installation kits Upgrade of the plug-in base installation kit to withdrawable version 3-pole -- including side panels and racking mechanism. NSE0_ VL9.00-4WF31 NSE0_ VL9.00-4WA31 Withdrawable versions Same as plug-in base installation kit, with additional side panels and racking mechanism Rear-accessible terminals 1) 3-pole B 3VL WA unit Front-accessible terminals 3-pole B 3VL WC unit Blade contacts As replacement for converting fixed-mounted circuit-breakers into plug-in/withdrawable circuit-breakers, including trip pin 1 set = 6 units 3-pole B 3VL PS unit Trip pins and springs As replacement for plug-in/withdrawable B 3VL PF unit circuit-breaker Auxiliary circuit plug connections for plug-in bases Accessory connections for plug-in circuit-breakers (factory-wired connectors) and for plug-in bases or withdrawable version (coupling with screw terminal) 2) 8 terminals B 3VL PJ unit Position indicator switches (connected/disconnected position) for plug-in/withdrawable base, 1 changeover contact, max. 2 signaling switches possible B 3VL WL unit ) With VL800 UL (MG frame) to VL00 UL (PG frame) as vertical connection. 2) It is recommended to use a maximum of 3 auxiliary circuit plug-in systems per circuit-breaker (24 terminals). /28 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

33 Accessories/spare parts For VL1200 UL (NG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg For VL00 UL (PG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg B 3VL WA unit B 3VL WA unit B 3VL WC unit B 3VL WC unit B 3VL PS unit B 3VL PS unit B 3VL PF unit B 3VL PF unit ) 2) B 3VL PJ unit B 3VL PJ unit B 3VL WL unit B 3VL WL unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /29

34 Accessories/spare parts Version For VL150 UL (DG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg Connection parts for fixed-mounted circuit-breakers 3-pole Rear-mounting terminals Short terminal (1 unit) B 3VL RA unit Long terminal (1 unit) B 3VL RB unit Terminal kit (2 short + 1 long) 3-pole B 3VL RC unit NSE0_ VL9.00-4RA01, 3VL9.00-4RB01 NSE0_ VL9.00-4RK01, 3VL9.00-4RL01 Short flat connector (1 unit) B 3VL RK unit Long flat connector (1 unit) B 3VL RL unit Flat connector kit (2 short + 1 long) 3-pole B 3VL RM unit NSE0_00725 Flat connecting bar (1 unit) -- Flat connecting bar 1 set = 3 units, 3-pole -- 3VL9.00-4R..1 NSE0_00700a 3VL9...-4TC # ' 3VL9...-4TD # " 3VL9...-4TF.1 NSE0_00701a 5 - # "! Box terminals Connection for flexible flat copper busbar or cable 1 set = 3 units B 3VL TC unit Round cable terminals 1) Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units B 3VL TD unit Multiple feed-in terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 3 units Terminals with screw connection - with insulator (for rear) for use with busbars and cable lugs -- 3VL9.00-4TA.1 1 set = 3 units metric thread B 3VL TA unit set = 3 units inch thread B 3VL TB unit Cable lug connection 1 set = 3 units B 3VL TM unit set = 9 units -- 1 set = 12 units -- 1) Round cable terminal for VL150 UL suitable for 60 to 150 A. /30 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

35 Accessories/spare parts For VL250 UL (FG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight For VL400 UL (JG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg kg B 3VL RA unit B 3VL RA unit B 3VL RB unit B 3VL RB unit B 3VL RC unit B 3VL RC unit B 3VL RK unit B 3VL RK unit B 3VL RL unit B 3VL RL unit B 3VL RM unit B 3VL RM unit B 3VL TC unit B 3VL TC unit B 3VL TD unit B 3VL TD unit B 3VL TF unit B 3VL TA unit B 3VL TA unit B 3VL TB unit B 3VL TM unit B 3VL TM unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /31

36 Accessories/spare parts Version Connection parts for fixed-mounted circuit-breakers 3-pole Rear-mounting terminals Short terminal (1 unit) -- Long terminal (1 unit) -- Terminal kit (2 short + 1 long) 3-pole -- NSE0_ VL9.00-4RA01, 3VL9.00-4RB01 NSE0_ VL9.00-4RK01, 3VL9.00-4RL01 Short flat connector (1 unit) -- Long flat connector (1 unit) -- Flat connector kit (2 short + 1 long) 3-pole -- For VL400X UL (LG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg NSE0_00725 Flat connecting bar (1 unit) B 3VL RG unit Flat connecting bar 1 set = 3 units, 3-pole B 3VL RH unit VL9.00-4R..1 NSE0_00700a 3VL9.00-4TC # ' 3VL9.00-4TD # " 3VL9...-4TF.1 NSE0_00701a 5 - # "! Box terminals Connection for flexible flat copper busbar or cable 1 set = 3 units -- Round cable terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units B 3VL TD unit Multiple feed-in terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units double -- Terminal on the 3VL9 incoming side 1) B 460-4TX unit Terminal on the B 3VL TY unit outgoing side 1) triple -- quadruple -- Terminals with screw connection - with insulator (for rear) for use with busbars and cable lugs 3VL9.00-4TA.1 1 set = 3 units metric thread B 3VL TA unit set = 3 units inch thread B 3VL TB unit ) Extended terminal cover is included in the scope of supply. /32 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

37 Accessories/spare parts For VL800 UL (MG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight For VL1200 UL (NG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg kg B 3VL RG unit B 3VL RG unit B 3VL RH unit B 3VL RH unit B 3VL TF unit B 3VL TG unit B 3VL TG unit B 3VL TH unit B 3VL TA unit B 3VL TA unit B 3VL TB unit B 3VL TB unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /33

38 Accessories/spare parts Version Connection parts for fixed-mounted circuit-breakers 3-pole Rear-mounting terminals Short terminal (1 unit) -- Long terminal (1 unit) -- Terminal kit (2 short + 1 long) 3-pole -- NSE0_ VL9.00-4RA01, 3VL9.00-4RB01 NSE0_ VL9.00-4RK01, 3VL9.00-4RL01 Short flat connector (1 unit) -- Long flat connector (1 unit) -- Flat connector kit (2 short + 1 long) 3-pole -- For VL00 UL (PG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg NSE0_00725 Flat connecting bar (1 unit) B 3VL RG unit Flat connecting bar 1 set = 3 units, 3-pole B 3VL RH unit VL9.00-4R..1 NSE0_00700a 3VL9...-4TC # ' 3VL9...-4TD.1 Box terminals Connection for flexible flat copper busbar or cable 1 set = 3 units -- Round cable terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units -- Multiple feed-in terminals Only for cables (Al or Cu) Aluminum terminal (tinned) 1 set = 3 units # " " 3VL9...-4TG.1 NSE0_00701a 3VL9.00-4TA.1 Terminals with screw connection - with insulator (for rear) for use with busbars and cable lugs 1 set = 3 units metric thread B 3VL TA unit set = 3 units inch thread B 3VL TB unit /34 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

39 Accessories/spare parts Version For VL150 UL (DG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight Interlocks 3-pole Locking devices for toggle levers for locking the circuit-breaker in the "OFF" position. Up to 3 padlocks with Ø 5 8 mm can be used. Removable (padlocks not included) B 3VL HL unit kg NSE0_ VL9.00-3HL01 Rear interlocking modules for the mechanical interlocking of two adjacent circuit-breakers. The circuit-breakers must be of the same installation type and size. (Mounting plate not included in scope of supply) Fixed-mounted circuit-breakers B 3VL LC unit NSE0_ VL9.00-8L.01 NSE0_ VL9.00-8LA01 NSE0_ VL9...-8HA01 Interlocking modules for Bowden wire interlocking 1) Combinations of next size up/down possible (see Order No.) for the mechanical interlocking of two circuit-breakers. Interlocking module for one circuit-breaker B 3VL LA unit Bowden wires for Bowden wire interlocking 1) Bowden wire length 0.5 m B 3VL LH unit Bowden wire length 1.0 m B 3VL LH unit Bowden wire length 1.5 m B 3VL LH unit Safety lock installation kits Key can be removed with the circuit-breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types RONIS B 3VL HA unit CES B 3VL HA unit For motorized operating mechanism with spring energy store Lock types -- RONIS Filli Giussani B 3VL HA unit Sets of fixing screws (metric thread) including the screws, washers and nuts required to secure a circuit-breaker to a prepared surface Set with 4 screws B 3VL SA unit Transparent covers for trip units, sealable to prevent access by unqualified personnel and unauthorized changes to settings (seal not included) 3VL AK01 NSE0_01531a Solid-state overcurrent trip unit B 3VL BL unit Thermal-magnetic B 3VL BM unit Function testers for electronic trip units for ETU/LCD ETU trip unit B 3VL AK unit Universal power supplies for function tester (50/60 Hz V AC) Adapter unit required if the battery power for the function tester is not used B 3VL AL unit Battery power supplies for activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition) B 3VL AP unit VL AP01 1) Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism. * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /35

40 Accessories/spare parts Version For VL250 UL (FG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight Interlocks 3-pole Locking devices for toggle levers for locking the circuit-breaker in the "OFF" position. Up to 3 padlocks with Ø 5 8 mm can be used. Removable (padlocks not included) B 3VL HL unit kg NSE0_ VL9.00-3HL01 Rear interlocking modules for the mechanical interlocking of two adjacent circuit-breakers. The circuit-breakers must be of the same installation type and size. (Mounting plate not included in scope of supply) Fixed-mounted circuit-breakers B 3VL LC unit Interlocking modules for Bowden wire interlocking 1) Combinations of next size up/down possible (see Order No.) NSE0_00733 for the mechanical interlocking of two circuit-breakers. Interlocking module for one circuit-breaker B 3VL LA unit VL9.00-8L.01 NSE0_ VL9.00-8LA01 NSE0_ VL9...-8HA01 Bowden wires for Bowden wire interlocking 1) Bowden wire length 0.5 m B 3VL LH unit Bowden wire length 1.0 m B 3VL LH unit Bowden wire length 1.5 m B 3VL LH unit Safety lock installation kits Key can be removed with the circuit-breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types RONIS B 3VL HA unit CES B 3VL HA unit For motorized operating mechanism with spring energy store Lock types RONIS -- Filli Giussani B 3VL HA unit Sets of fixing screws (metric thread) including the screws, washers and nuts required to secure a circuit-breaker to a prepared surface Set with 4 screws B 3VL SA unit Transparent covers for trip units, sealable to prevent access by unqualified personnel and unauthorized changes to settings (seal not included) 3VL AK01 Solid-state overcurrent trip unit B 3VL BL unit Thermal-magnetic B 3VL BM unit Function testers for electronic trip units for ETU/LCD ETU trip unit B 3VL AK unit Universal power supplies for function tester (50/60 Hz V AC) Adapter unit required if the battery power for the function tester is not used B 3VL AL unit Battery power supplies for activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition) B 3VL AP unit NSE0_01531a 3VL AP01 1) Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism. /36 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

41 Accessories/spare parts For VL400 UL (JG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight For VL400X UL (LG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg kg B 3VL HL unit B 3VL HL unit B 3VL LC unit B 3VL LC unit Combinations of next size up/down possible (see Order No.) B 3VL LA unit B 3VL LA unit B 3VL LH unit B 3VL LH unit B 3VL LH unit B 3VL LH unit B 3VL HA unit B 3VL HA unit B 3VL HA unit B 3VL HA unit B 3VL HA unit B 3VL HA unit B 3VL SA unit B 3VL SA unit B 3VL BL unit B 3VL BL unit B 3VL BM unit B 3VL BM unit B 3VL AK unit B 3VL AK unit B 3VL AL unit B 3VL AL unit B 3VL AP unit B 3VL AP unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /37

42 Accessories/spare parts Interlocks Version 3-pole Locking devices for toggle levers for locking the circuit-breaker in the "OFF" position. Up to 3 padlocks with Ø 5 8 mm can be used. Removable (padlocks not included) For VL800 UL (MG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight B 3VL HL unit kg NSE0_ VL9.00-3HL01 Rear interlocking modules for the mechanical interlocking of two adjacent circuit-breakers. The circuit-breakers must be of the same installation type and size. (Mounting plate not included in scope of supply) Fixed-mounted circuit-breakers B 3VL LC unit NSE0_00733 Interlocking modules for Bowden wire interlocking 1) Combinations of next size up/down possible (see Order No.) for the mechanical interlocking of two circuit-breakers. Interlocking module for one circuit-breaker B 3VL LA unit VL9.00-8L.01 NSE0_ VL9.00-8LA01 NSE0_ VL9...-8HA01 3VL AK01 Bowden wires for Bowden wire interlocking 1) Bowden wire length 0.5 m -- Bowden wire length 1.0 m B 3VL LH unit Bowden wire length 1.5 m B 3VL LH unit Safety lock installation kits Key can be removed with the circuit-breaker in the "OFF" position For front-operated rotary operating mechanisms Lock types RONIS B 3VL HA unit CES B 3VL HA unit For motorized operating mechanism with spring energy store Lock types RONIS B 3VL HA unit Filli Giussani -- Sets of fixing screws (metric thread) including the screws, washers and nuts required to secure a circuit-breaker to a prepared surface Set with 4 screws B 3VL SA unit Transparent covers for trip units, sealable to prevent access by unqualified personnel and unauthorized changes to settings (seal not included) Solid-state overcurrent trip unit B 3VL BL unit Thermal-magnetic -- Function testers for electronic trip units for ETU/LCD ETU trip unit B 3VL AK unit Universal power supplies for function tester (50/60 Hz V AC) Adapter unit required if the battery power for the function tester is not used B 3VL AL unit Battery power supplies for activating/parameterizing the LCD ETU trip unit (two 9 V blocks are required in addition) B 3VL AP unit NSE0_01531a 3VL AP01 1) Two interlocking modules and one Bowden wire are required. Cannot be used in conjunction with motorized operating mechanism. /38 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

43 Accessories/spare parts For VL1200 UL (NG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight For VL00 UL (PG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg kg B 3VL HL unit B 3VL HL unit B 3VL LC unit B 3VL LC unit Combinations of next size up/down possible (see Order No.) B 3VL LA unit B 3VL LA unit B 3VL LH unit B 3VL LH unit B 3VL HA unit B 3VL HA unit B 3VL HA unit B 3VL HA unit B 3VL HA unit B 3VL HA unit B 3VL SA unit B 3VL SA unit B 3VL BL unit B 3VL BL unit B 3VL AK unit B 3VL AK unit B 3VL AL unit B 3VL AL unit B 3VL AP unit B 3VL AP unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /39

44 Accessories/spare parts Further accessories Version 3-pole Masking frames (cover frames) for door cut-outs A IP40 For VL150 UL (DG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg Fixed-mounted or plug-in circuit-breaker B 3VL BC unit NSE Masking frame A B 1) IP40 Fixed-mounted, plug-in or withdrawable circuit-breaker with front-operated rotary operating mechanism or motorized operating mechanism B 3VL BG unit Masking frame B C IP20 Withdrawable circuit-breaker with toggle lever actuation. Installation kit contains masking frame and extended escutcheon (cannot be used together with a motorized operating mechanism/rotary operating mechanism) B 3VL BH unit Masking frame C Further accessories Version 1) For withdrawable version IP20. 3-pole Masking frames (cover frames) for door cut-outs A IP40 B 1) IP40 C IP20 For VL800 UL (MG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight Fixed-mounted or plug-in circuit-breaker B 3VL BC unit Fixed-mounted, plug-in or withdrawable circuit-breaker with front-operated rotary operating mechanism or motorized operating mechanism B 3VL BG unit Withdrawable circuit-breaker with toggle lever actuation. Installation kit contains masking frame and extended escutcheon (cannot be used together with a motorized operating mechanism/rotary operating mechanism) B 3VL BH unit For type Version DT Order No. Price Accessories for communication 3-pole Data transmission using COM10 VL150 UL (DG frame) to VL00 UL (PG frame) COM10 (PROFIBUS module for SENTRON 3VL UL) Module for connecting the SENTRON 3VL UL to the PROFIBUS DP, including switching function and Zone Selective Interlocking functionality, including connection cable to LCD ETU. PU (UNIT, SET, M) PS* PG Weight kg B 3VL AR unit /40 Siemens LV 1 Add-On 10/2006 * You can order this quantity or a multiple thereof.

45 Accessories/spare parts For VL250 UL (FG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg For VL400 UL (JG frame) and VL400X UL (LG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg B 3VL BC unit B 3VL BC unit B 3VL BG unit B 3VL BG unit B 3VL BH unit B 3VL BH unit For VL1200 UL (NG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg For VL00 UL (PG frame) DT Order No. Price PU (UNIT, SET, M) PS* PG Weight kg B 3VL BC unit B 3VL BC unit B 3VL BG unit B 3VL BG unit B 3VL BH unit B 3VL BH unit * You can order this quantity or a multiple thereof. Siemens LV 1 Add-On 10/2006 /41

46 3VL Molded Case Circuit-Breakers General data Design $ Withdrawable/plug-in base % Side panels of withdrawable version & Multiple feed-in terminal for Al/Cu (size-dependent) ( Round cable terminal for Al/Cu ) Box terminal for Cu * Masking frame/cover frame for door cut-out + Motorized operating mechanism (synchronizable), Front-operated rotary operating mechanism - Door-coupling rotary operating mechanism. Max Flex operating mechanism / Electronic overcurrent trip unit (LCD ETU) 0 Internal accessories 1 3VL molded case circuit-breakers UL (LCD ETU) 2 Solid-state overcurrent trip units (ETU) 3 TM Thermal-magnetic overcurrent trip units 4 Manual tester for electronic trip unit 5 COM10 PROFIBUS module 6 Rear terminals flat and round /42 Siemens LV 1 Add-On 10/2006

47 General data Siemens LV 1 Add-On 10/2006 /43

48 General data Rated current range from 30 A to 00 A Different switching capacity for each frame size N H L Standard (35 ka) High (65 ka) Very high (100 ka) No derating or loss of performance up to 40 C Solid-state overcurrent trip units from size 150 A (VL150 UL, DG frame), particularly for time-based discrimination and ground-fault protection 2 families of internal accessories Full range of external accessories e.g. terminals for aluminum cable. All circuit-breakers are supplied with integrated overcurrent trip units. The SENTRON VL150 UL (DG-Frame) to VL00 UL (PG-Frame) circuit-breakers are available with different connection variants (see "Main connections, basic equipment and options", page /48). Auxiliary switches/alarm switches or auxiliary trip units can be easily adapted by the customer, or they are also available ready installed if required. The switching capacity is shown on the front of every circuit-breaker. Standard switching capacity I cu = 35 ka at 50/60 Hz 480 V AC High switching capacity I cu = 65 ka at 50/60 Hz 480 V AC Very high switching capacity I cu = 100 ka at 50/60 Hz 480 V AC Standards and specifications SENTRON 3VL UL circuit-breakers comply with UL 489, CSA (CSA C22.2), IEC/EN , isolating features according to IEC , EN , NOM (NMX-J-266-ANCE-2002) on request. Please contact Siemens for details of other standards. The SENTRON 3VL UL circuit-breakers also comply with requirements for "disconnector units with features for stopping and switching off in an emergency" (EMERGENCY-STOP switches) in conjunction with lockable rotary operating mechanisms (red-yellow) and terminal covers. Please contact Siemens for details of other standards. Connection The following connection types are available for the SENTRON 3VL approved according to UL 489 Box terminal, suitable for stranded conductors, flexible copper bars and finely stranded conductors with end sleeves Screw terminals for flat connector Round cable/multiple feed-in terminal for Al/Cu cable Cable lug connection The SENTRON VL00 UL circuit-breakers are supplied with front connecting bars. The incoming and outgoing connections for the circuit-breaker can be freely selected. The electrical specifications remain the same. Bare conductors at the top connections must be insulated in the arc quenching space that is necessary above the arc chute. For the SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers, the connections for the internal accessories (auxiliary trip units, auxiliary switches and alarm switches) are supplied with terminal screws. The auxiliary trip units (shunt trip units and undervoltage trip units), auxiliary switches and alarm switches for all SENTRON 3VL circuit-breakers can be connected easily and directly. The motorized operating mechanisms with stored-energy feature are always equipped with terminals. The leading auxiliary switches for the rotary operating mechanisms are always supplied with connecting cables. /44 Siemens LV 1 Add-On 10/2006

49 General data SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers The main components of the SENTRON 3VL UL circuit-breakers are the three conducting paths with the incoming and outgoing terminals. The fixed and moving contacts are designed in such a way that the contacts are magnetically repelled if there is a short-circuit. In conjunction with the arcing chambers, a dynamic impedance is created that causes current limiting due to a reduction in the damaging effects of I 2 t and I p energy that arises during short-circuits. The circuit-breaker is trip-free. To the right and left of the operating mechanism, the doubleinsulated accessory compartments are situated for the auxiliary trip units and auxiliary switches. The trip units for the SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) have the following features The trip units are available in thermal-magnetic and solid-state versions. The thermal-magnetic trip units have permanently set overload releases and adjustable short-circuit releases. As is the case for all versions of the SENTRON 3VL UL circuitbreakers with electronic trip units, the current transformers are in the same enclosure as the trip units. They send a signal which is proportional to the load current to the electronic overcurrent trip unit. All SENTRON 3VL UL circuit-breakers with electronic trip units measure the actual r.m.s. current. This type of measurement is the most accurate method and enables reliable evaluation of currents in today's electrical distribution systems with extreme harmonics. Overcurrent trip unit systems The trips units are delivered complete with the factory-installed contact unit. The incoming and outgoing connections of the circuit-breaker can only be freely selected with complete circuitbreakers. 1. Overcurrent trip unit for the SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers, thermal-magnetic The overcurrent and short-circuit releases function with bimetallic and magnetic trip units. They are available with permanently set overload releases and adjustable short-circuit releases. The circuit-breakers for starter combination applications are usually combined with a motor contactor and a suitable overload relay. The non-automatic circuit-breakers have an integrated shortcircuit self-protection system eliminating the need for back-up fuses. Non-automatic circuit-breakers have no overload protection. 2. Overcurrent trip unit for the SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers, solid-state, ETU The electronic overcurrent trip unit system consists of 3 current transformers Evaluation electronics with microprocessor Internal power supply, no external auxiliary voltage necessary Tripping solenoid. For the SENTRON VL150 UL (DG frame) and VL250 (FG frame) circuit-breakers, the tripping solenoid is installed in the left accessory compartment. The protection functions of the solid-state overcurrent trip units are maintained without additional auxiliary voltage. The electronic trip units are powered by circuit-breaker-internal current transformers. The solid-state overcurrent trip unit has to be activated for parameterizing. This requires a load current of at least 20 % of the respective rated current I n of the circuit-breaker. If this load current is not available, the necessary auxiliary power can be fed in through a 3VL AP01 battery power supply or through the 3VL AK01 function tester. For communication-capable circuit-breakers the trip unit is supplied with power through COM10. At the output of the electronic overcurrent trip unit module there is a tripping solenoid which trips in the case of overload or shortcircuit. Abbreviations (functions) L = Long Time Delay = Overload protection S = Short Time Delay = Short-circuit protection (short-time delayed) I = Instantaneous = Short-circuit protection (instantaneous) N = Neutral Protection = Neutral conductor protection G = Ground Fault = Ground-fault protection Siemens LV 1 Add-On 10/2006 /45

50 General data Electronic trip unit VL150 UL (DG frame) to VL00 UL (PG frame) functional overview Order No. supplement Trip unit/model System protection Starter protection Generator protection Function Setting options L Overload protection S 1) Short-circuit protection (short-time delayed) I 1) Short-circuit protection (instantaneous) G Ground-fault protection I r = I n I sd = I r t sd [s] I i = I n I g = I n KJ M I KK M I KL M I KN 525 (corresponds to LI TM) 2) GB 545 (corresponds to LI ETU10) GD 545 (corresponds to LIG ETU12) GE 545 (corresponds to -- LSI ETU20) GH 545 (corresponds to -- LSIG ETU22) JH 576 (corresponds to LI, LSI LCD ETU 40) JM 576 (corresponds to LCD ETU 42) LSIG ) Order No. supplement Trip unit/model KJ M KK M KL M KN 525 (corresponds to TM) 2) GB 545 (corresponds to ETU10) GD 545 (corresponds to $ ETU12) GE 545 (corresponds to ETU20) GH 545 (corresponds to $ ETU22) JH 576 (corresponds to LCD ETU 40) JM 576 (corresponds to LCD ETU 42) -- $/% Ground-fault protection $ Vectorial summation current formation (4-conductor system) % Direct detection of ground-fault current in the neutral point of the transformer 1) Depends on size 2) TM up to I n = 00 A 3) t g s. Thermal image Phase failure Communication-capable Ground-fault protection Number of poles I 2 t (ON/OFF) Trip class (t C ) Time-lag class (t R ) Thermal-magnetic trip unit Magnetic trip unit Solid-state trip unit LCD display /46 Siemens LV 1 Add-On 10/2006

51 General data Internal accessories (auxiliary switches, undervoltage trip units, shunt trip units) The SENTRON 3VL UL circuit-breakers can be supplied with all the internal accessories (e.g. auxiliary switches, undervoltage trip units or shunt trip units). The available versions can be found in the tables with the Order No. supplements. Fixed mounting, plug-in or withdrawable version The fixed-mounting circuit-breaker is the basic version. This can be converted very easily into a plug-in or withdrawable version with the aid of the appropriate installation kit. This kit contains blade contacts, a trip pin and terminal covers for the plug-in version. The kit for the withdrawable version also contains side panels and a racking mechanism. Even when the masking frame is mounted, the withdraw handle mechanism can still be used with the door closed. Operating mechanisms The basic versions of the SENTRON 3VL UL circuit-breakers are equipped with a toggle lever as an operating mechanism which is also used as a position indicator. As well as "ON" and "OFF", "Tripped" is also indicated. The toggle lever assumes the "tripped" position when the internal tripping mechanism is activated by an overcurrent trip operation, e.g. an overload or short-circuit. The activation of an undervoltage trip unit or shunt trip unit also causes the toggle lever to assume the "tripped" position. The toggle lever must be put into the "OFF/RESET" position before the circuit-breakers can be reclosed. It will then be possible to reset the internal tripping mechanism and reclose the main contacts on the circuit-breaker (see figure). A toggle handle extension is supplied with the SENTRON VL 1200 UL (NG frame) and VL00 UL (PG frame) circuit-breakers. This accessory must be ordered separately for SENTRON VL400 UL (JG frame) to VL800 UL (MG frame) circuit-breakers, if required. Front-operated rotary operating mechanisms These operating mechanisms have been designed for direct mounting to the circuit-breaker and change the toggle lever movement from a linear to a rotary motion. A leading voltage can be applied to the undervoltage trip unit of a circuit-breaker with leading auxiliary switches which makes the circuit-breaker ready-to-close. Door-coupling rotary operating mechanisms (complete operating mechanisms) Door-coupling rotary operating mechanisms and removable covers are available for circuit-breakers which are installed into control cabinets and distribution boards. These are supplied as complete sets, including an articulated-shaft mechanism. According to the switching position and the "RESET" position, the same applies to the rotary operating mechanisms as to the toggle lever. The position of the operator lever (knob) indicates the status. This means that all SENTRON 3VL UL circuit-breakers which have these rotary operating mechanisms as well as the corresponding terminal covers can be used as main control switches. Toggle lever operating mechanism positions NSE0_ 00038a OFF RESET ON Tripped Rotary operating mechanism secured with a padlock Motorized operating mechanisms The SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers can be equipped with motorized operating mechanism for remote opening and closing during operation. These motorized operating mechanisms for SENTRON VL150 UL (DG frame) to VL800 UL (MG frame) circuit-breakers have a stored-energy feature (for synchronization) with a maximum ON period of t E 100 ms. For SENTRON VL1200 UL (NG-frame) and VL00 UL (PG frame) circuit-breakers, there are motorized operating mechanisms without a stored-energy feature for remotecontrolled ON and OFF switching. All motorized operating mechanisms are always supplied with a locking device for padlocks. Optional safety locks are also available for motorized operating mechanisms with storedenergy feature. These locking devices can be used to block the operating mechanism electrically and mechanically. All remote-controlled operating mechanisms are equipped with a manual operation option for maintenance purposes. The motorized operating mechanisms with stored-energy feature for VL150 UL (DG frame) to VL800 UL (MG frame) as well as the motorized operating mechanisms for VL1200 UL (NG frame) and VL00 UL (PG frame) are each equipped inside with a floating signaling contact (NO) for the following functions Querying the auto/manual selector switch for VL150 UL (DG frame) to VL800 UL (MG frame) Actuating the mechanical OFF/0 button NSE0_00699 Siemens LV 1 Add-On 10/2006 /47

52 General data Main connections, basic equipment and options NSE0_00701a NSE0_00700a 5 - # " Box terminal (for copper cables or solid/ flexible busbars) Main connections (see operating instructions for conductor cross-sections) Available -- Not available Terminal with screw connection (metric/inch) Round cable terminal/ multiple feed-in terminal (for Al/Cu cable) Circuit-breaker Connection overview and further options Box terminals Screw terminal Round cable terminal/ multiple feed-in terminal Rear-mounting terminals Cable lug connection Direct connection of busbars is possible only Cu with metric inch thread Cu or Al thread for flat connector VL150 UL (DG frame) VL250 UL (FG frame) VL400 UL (JG frame) -- 1)2) VL400X UL (LG frame) -- 1)2) VL800 UL (MG frame) -- 1) VL1200 UL (NG frame) -- 1) VL00 UL (PG frame) ) Multiple feed-in terminal 2) Round cable terminal also available. Auxiliary trip units and auxiliary switches Undervoltage trip units, leading auxiliary switches The circuit-breaker cannot be closed if there is no voltage present at the undervoltage trip unit. If voltage is not applied to the release, operation of the circuit-breaker will result in re-tripping. Frequent re-tripping should be avoided because of its adverse effect on the endurance of the circuit-breaker. A leading voltage can be applied to the undervoltage trip unit of a circuit-breaker with leading auxiliary switches which makes the circuit-breaker ready-to-close. For SENTRON 3VL UL circuit-breakers, the leading auxiliary switch can be supplied with the front rotary operating mechanism or complete operating mechanism. For more detailed information, please refer to the selection and ordering data tables for accessories. Shunt trip unit The shunt trip unit is used for remote tripping of the circuitbreaker. The coil of the shunt trip unit is designed for short-time operation only. A coil-trip is implemented internally. It is not permissible to apply a continuous trip command to a shunt trip unit to prevent closing when the circuit-breaker is tripped. A central tap is provided as standard for checking the conductivity of the coil. VL150 UL (DG frame) VL250 UL (FG frame) VL400 UL (JG frame) VL400X UL (LG frame) VL800 UL (MG frame) VL1200 UL (NG frame) VL00 UL (PG frame) X2 Left accessory sub-section optionally Max. 3 HS Max. 3 HS Max. 3 HS Max. 3 HS Max. 4 HS Max. 4 HS Max. 4 HS Max. 4 HS Max. 2 HS + 1 AS Max. 2 HS + 1 AS Max. 2 HS + 1 AS Max. 2 HS + 1 AS Max. 2 HS + 2 AS Max. 2 HS + 2 AS Max. 2 HS + 2 AS Max. 2 HS + 2 AS VL150 UL (DG frame) / VL250 UL (FG frame) with with solid-state overcurrent trip unit (ETU or LCD ETU) Left accessory sub-section is occupied by tripping solenoid NSE0_01827 U< U< U< U< U< U< U< U< X1 Right accessory sub-section optionally Max. 3 HS Max. 3 HS Max. 3 HS Max. 3 HS Max. 4 HS Max. 4 HS Max. 4 HS Max. 4 HS Max. 2 HS + 1 AS Max. 2 HS + 1 AS Max. 2 HS + 1 AS Shunt trip unit or undervoltage trip unit U< HS an auxiliary switch 1 NO or 1 NC AS an alarm switch 1 NO or 1 NC Note Maximum 6 switch blocks (HS) per circuit-breaker VL150 UL (DG frame) to VL400X UL (LG frame) Maximum 8 switch blocks (HS) per circuit-breaker VL800 UL (MG frame) to VL00 UL (PG frame) Possible complements for the insulated accessory subsections in the SENTRON 3VL UL circuit-breakers Before ordering, use the table above to check whether the required combination of shunt trip units, undervoltage trip units and auxiliary/alarm switches is feasible. /48 Siemens LV 1 Add-On 10/2006

53 General data Auxiliary switches Auxiliary switches (HS) are used for indication and control. The contacts of the auxiliary switch close and open together with the main contacts. Alarm switches The alarm switches (AS) are active when the circuit-breaker has been tripped due to an overcurrent e.g. overload or short-circuit. However, they are also activated if the circuit-breaker has been tripped by a shunt trip unit or undervoltage trip unit. Installation of internal accessories The insulated accessory subsections for installing accessories (auxiliary trip units and auxiliary/alarm switches) have the designations X1, X2 and X4. The equipping of the circuit-breaker with internal accessories and the configuration options for circuit-breakers with auxiliary trip units and auxiliary/alarm switches depend on the mounting position and size of the circuit-breaker (see the illustration "Possible complements for the insulated accessory subsections of the 3VL UL circuit-breakers"). PLC controls The auxiliary and alarm switches can be used to send signals to programmable controllers. These switch blocks are part of the Siemens 3SB3 range. Leading auxiliary switches The leading auxiliary switches OFF to ON or ON to OFF are available as a retrofit set for rotary operating mechanisms. The following measurement methods can be used to detect neutral conductor and ground-fault currents Vectorial summation current formation (measurement method 1) Ground-fault detection in symmetrically loaded systems The three phase currents are evaluated using the vectorial summation current summation. Ground-fault detection in asymmetrically loaded systems The neutral conductor current is measured directly. For the 3- pole circuit-breakers, this measurement is only evaluated for ground-fault protection. The electronic trip unit determines the ground-fault current for the three phase currents and neutral conductor current by means of vectorial summation current formation. 6 $ 3VL! 8 L1 L2 L3 PE NSE0_00685! $ & $ = Function Current limiting The SENTRON 3VL UL circuit-breakers utilize the design principle of magnetic repulsion of the contacts. The contacts open before the anticipated peak value of the short-circuit current is achieved. The current-limiting effects of the SENTRON 3VL UL circuit-breakers provide effective protection for system components against the thermal and dynamic effects of the short-circuit current in the event of an electrical fault. Ground-fault protection Ground-fault release "G" senses fault currents that flow to ground and that can cause fire in the plant. Several circuit-breakers connected in series can provide graduated discrimination by means of the adjustable delay time. 3-pole circuit-breaker, current transformer in the neutral conductor Direct detection of the ground-fault current through a current transformer in the grounded neutral point of the transformer (measurement method 2) The current transformer is installed directly in the grounded neutral point of the transformer. T6 3VL L1 L2 L3 N PE NSE0_ pole circuit-breakers, current transformers in the grounded neutral point of the transformer. Transformer protection The SENTRON 3VL UL circuit-breakers protect energy distribution systems against overload and short-circuit on the lowvoltage side of the infeed transformer. The resulting requirements with respect to current-based and/or time-based discrimination are reliably fulfilled by the SENTRON 3VL UL circuit-breakers for system protection (equipped with thermal-magnetic (TM) or solid-state overcurrent trip units (ETU or LCD ETU). Siemens LV 1 Add-On 10/2006 /49

54 General data Thermal-magnetic overcurrent trip unit Application System protection TM/model 525, LI/LIN function L I NSE0_00691 Overload protection, fixed, short-circuit protection, adjustable I i = 5 to 10 I n, for VL150 UL (DG frame) to VL00 UL (PG frame) I i Amps I n= 00 A 40 C TM ~ Trip Unit/Disparador 525 I i Amps NSE0_01828 I i Amps #! ' Application Starter protection M, I function Short-circuit protection, adjustable I i = 3 to I 1) n, for VL150 UL (DG frame) to VL1200 UL (NG frame) Solid-state overcurrent trip unit ETU For types General information VL150 UL (DG frame) No auxiliary voltage for tripping unit required to VL00 UL All ETUs have a thermal image (PG frame) Flashing green LED indicates faultless operation of microprocessor L I NSE0_00691 Application System protection model 545, LI/LIN function (corresponds to ETU10) Overload protection I R = 0.4 to 1 I n, time-lag class t R = 2.5 to 30 Short-circuit protection (instantaneous) I i = 1.25 to 11 I 1) n Overload status (I > 1.05 I R ) is indicated by continuous yellow LED (alarm) Integrated self-test function Female connector for test unit Alarm I r > X Amps Trip Unit/Disparador 545 I n =250 A ~ t r Sec. 6 Ii Amps Active NSE0_01831 G G L S I NSE0_00920 L I NSE0_00693 L S I NSE0_00921 Application System and generator protection model 545, LSI/LSIN function (corresponds to ETU20) Overload protection I R = 0.4 to 1 I n, Short-circuit protection (short-time delayed) I sd = 1.5 to 10 I 1) R, t sd = 0 to 0.5 s, I 2 t selectable on/off Short-circuit protection (instantaneous) I i = 11 I n (fixed) 1) Application System protection model 545, LIG/LING function (corresponds to ETU12) Overload protection I R = 0.4 to 1 I n, time-lag class t R = 2.5 to 30 Short-circuit protection (instantaneous) 1) I = 1.25 to 11 I n Ground-fault protection Measurement method 1 (G R ) vectorial summation current formation for the currents of the three phases/and neutral conductor (four-conductor systems) I n = I n. Application System and generator protection model 545, LSIG/LSING function (corresponds to ETU22) Overload protection I R = 0.4 to 1 I n, Short-circuit protection (short-time delayed) I sd = 1.5 to 10 I R, t sd = 0 to 0.5 s, I 2 t selectable on/off Short-circuit protection (instantaneous) I i = 11 I n (fixed) 1) Ground-fault protection Measurement method 1 (G R ) vectorial summation current formation for the currents of the three phases/and neutral conductor (four-conductor systems) I n =I n. 1) Size dependent, see "Selection and Ordering Data" A LI/LIG - FG/JG Alarm I r > X Amps Trip Unit/Disparador 545 I n =250 A ~ I sd xi 8 7 r tsd Sec..1 I t.4 OFF I t ON Active A LSI/LSIG - FG/JG Alarm I r > X Amps Trip Unit/Disparador 545 I n =250 A ~ t r Sec. 6 Ii Amps Active A LI/LIG - FG/JG Alarm I r > X Amps Trip Unit/Disparador 545 I n =250 A ~ I sd xi 8 7 r tsd Sec..1 I t.4 OFF I t ON Active A LSI/LSIG - FG/JG NSE0_01830 NSE0_01831 NSE0_01830 /50 Siemens LV 1 Add-On 10/2006

55 General data Solid-state overcurrent trip unit LCD ETU General information No auxiliary voltage for tripping unit required Current indicator Illuminated LCD display indicates faultless operation of microprocessor The overload status (I > 105 % I R ) is indicated by "overload" on the LCD display User-friendly, menu-driven setting of protection parameters in absolute ampere values by means of keys Integrated self-test function Female connector for test unit Communication link to PROFIBUS DP is possible. L L S I NSE0_00696 Application System protection model 576, LSI/LSIN functions (corresponds to ETU40) Overload protection I R = 0.4 to 1 I n, time-lag class t R = 2.5 to 30 On/off selectable thermal image Short-circuit protection (short-time delayed) I sd = 1.25 to 10 I 1) R, t sd = 0 to 0.5 s, X3 8JM ESC A= 1157 B= 14 C= 10 N= 0 NSE0_01833 I NSE0_00944 I 2 t selectable on/off Short-circuit protection (instantaneous) 1) I i = 1.25 to 11 I n L S G I NSE0_00697 Application System protection model 576, LSIG/LSING function (corresponds to ETU42) Overload protection I R = 0.4 to 1 x I n, time-lag class t R = 2.5 to 30 On/off selectable thermal image Short-circuit protection (short-time delayed) I sd = 1.25 to 10 I 1) R, t sd = 0 to 0.5 s, X3 8JM ESC A= 1157 B= 14 C= 10 N= 0 NSE0_01833 I 2 t selectable on/off Short-circuit protection (instantaneous) I i = 1.25 to 11 I n 1) Ground-fault protection Measurement method 1 (G R ) vectorial summation current formation for the currents of the three phases/and neutral conductor (four-conductor systems) I n = 0.4 to 1 I n. Measurement method 2 (G GND ) direct detection of ground-fault current by means of current transformer, I g = 0.4 to 1 I n, t g = 0.1 to 0.5 s. 1) Size dependent, see "Selection and Ordering Data". Siemens LV 1 Add-On 10/2006 /51

56 General data Configuration Communication Two alternatives are available for communication. An LCD ETU (model 576) is required in addition for the more extensive communication with COM10. It can be switched on and off using an optional motorized operating mechanism. Data transmission through COM10 Transmittable data Commands Switch on/off Delete alarm and tripping memory, min./max. measured values and maintenance information Operating statuses ON or OFF status trip position Event signals Tripped signals with tripping current and time stamp Alarm signals with time stamp (e.g. overload, phase unbalance current etc.) Threshold value warning, with time stamp (e.g. phase currents) Measured values Phase currents and neutral conductor current, each with min./max. value and time stamp Parameter values Read and write Maintenance information (e.g. number of tripping operations, number of switching operations) Device identification data Time-of-day synchronization Available -- Not available Function Electronic trip unit version TM ETU LCD ETU Function of the communication components Transmission of the operating status (ON, OFF, tripped, warnings, causes of tripping, event log) to the PROFIBUS Display of measured values (current only) and parameters in trip unit, change parameters through display Transmission of maximum value of present current in % Transmission of individual present phase currents incl. min./max. and time stamp COM10 module Breaker Data Adapter Transmission of identification data Transmission of switch information on HTML basis locally to a PC Transmission of switch information on HTML basis through Ethernet Read out and adjust protection parameters through PROFIBUS Breaker Data Adapter Plus Required Function can optionally be taken over by more than one trip unit. Function can optionally be taken over by one of these modules. Not necessary for this function, optionally combinable -- Function not available /52 Siemens LV 1 Add-On 10/2006

57 General data Switching of DC currents The VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers (for system protection with TM, for starter combinations, non-automatic circuit-breakers) can also be used for DC switching and protection applications. The VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers with solid-state trip units (ETU) are not suitable for DC applications. However, the maximum permitted DC voltage for each conducting path needs to be taken into account for DC switching applications. For voltages above 250 V for VL150 UL (DG frame) to VL00 UL (PG frame), a series connection of 2 or 3 conducting paths is required. As the current has to flow through all of the conducting paths, the following connections are recommended in order to satisfy the thermal tripping characteristics. With DC applications, the response values of the instantaneous short-circuit releases ("I" trip units) are increased by 30 to 40 %. Recommended connection/maximum permitted DC voltage U e Remarks Circuit A Circuit B For 3-pole circuit-breaker 250 V DC 500 V DC 2-pole switching (non-grounded system) 1 L 3 L! # If there is no possibility of a ground fault, or if every ground fault is rectified 2 4 " $ immediately (ground-fault monitoring), then the maximum permitted DC voltage is 500 V for both circuits. NSE0_ % " = In the event of a ground fault in circuit A, there must always be 2 conducting paths in series, and 3 conducting paths in series in the event of a ground fault in circuit B. Technical specifications Type Rated short-circuit breaking capacity For rated short-circuit breaking capacity see table under "Overview". 1) Rated DC data apply only for thermal-magnetic overcurrent trip units. 2) On request. VL150 UL DG frame VL250 UL FG frame VL400 UL JG frame VL400X UL LG frame VL800 UL MG frame VL1200 UL NG frame Max. rated current I n A Rated insulation voltage U i only according to IEC Main circuits AC V Auxiliary circuits AC V Rated operational voltage U e NEMA 50/60 Hz AC V DC 1) V IEC 50/60 Hz AC V Utilization categories A A A A B 2) A B 2) A B 2) VL00 UL PG frame Permissible ambient temperature Operation C -25 to to to to to to to +70 Storage C -40 to to to to to to to +80 Permissible load at various ambient temperatures Close to the circuit-breaker, related to the rated current of the circuit-breaker Circuit-breakers for system TM/ETU up to 40 C % 100/ / / /100 --/100 --/100 --/100 protection TM/ETU at 50 C % 93/95 93/95 93/95 93/95 --/95 --/95 --/95 TM/ETU at 60 C % 86/80 86/80 86/80 86/80 --/80 --/80 --/80 Circuit-breakers for starter up to 40 C % combinations and non-automatic at 50 C % circuit-breakers at 60 C % Weights of 3-pole circuit-breakers Basic unit without electronic trip unit Thermal-magnetic overcurrent trip unit Solid-state overcurrent trip unit Basic unit with thermal-magnetic overcurrent trip unit with solid-state overcurrent trip unit kg 1.5 kg 0.7 kg 0.9 kg 2.2 kg A B 2) Siemens LV 1 Add-On 10/2006 /53

58 General data Type VL150 UL DG frame VL250 UL FG frame VL400 UL JG frame VL400X UL LG frame VL800 UL MG frame VL1200 UL NG frame Endurance Operating cycles Electrical endurance Operating cycles Max. switching frequency 1/h Types of connection see "Main connections, basic equipment and options", Conductor cross-sections see operating instructions. Power loss per circuit-breaker at max. rated current System protection TM W System protection ETU or W LCD ETU for starter combinations or non-automatic circuit-breakers W Permissible mounting position 1)! 2) ' ' '! ' VL00 UL PG frame 5 - $ = 5 - '! = 5 - # " # > Auxiliary and alarm switches Conventional free-air thermal current I th A Rated making capacity A AC Rated operational voltage V Rated operational current AC-12 A AC-15 A DC Rated operational voltage V Rated operational current DC-12 A DC-13 A Back-up fuse/ miniature circuit-breaker A 10 TDz / TDz / TDz / TDz / TDz / TDz / TDz / 10 Leading auxiliary switch with rotary operating mechanism Rated thermal current I th A Rated making capacity A 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) 2 (ind. 0.5) Rated operational voltage V AC Rated operational current A Rated switching capacity, inductive, A power factor 0.7 Rated switching capacity A Back-up fuse, quick A Position indicator switches Rated thermal current I th A Rated making capacity A 10 Rated operational voltage V AC Rated operational current A 10 Rated switching capacity, inductive, A 4 4 power factor 0.7 Rated switching capacity A 10 Back-up fuse, quick A 10 1) For VL800 UL (MG frame) to VL00 UL (PG frame) circuit-breakers with guide frame in lateral mounting position. Adapter set on request. 2) Permissible current load factor 0.9 only with internal accessories. /54 Siemens LV 1 Add-On 10/2006

59 General data Type Trip units VL150 UL DG frame VL250 UL FG frame Group 1 VL150 UL (DG frame) to VL400X UL (LG frame) VL400 UL JG frame VL400X UL LG frame VL800 UL MG frame VL1200 UL NG frame Group 2 VL800 UL (MG frame) to VL00 UL (PG frame) Undervoltage trip unit Response voltage Release (circuit-breaker is tripped) V U s U s Pick-up (circuit-breaker can be closed) V U s U s Power consumption (continuous duty) at 50/60 Hz 24 V AC 1) VA /60 Hz V AC VA /60 Hz V AC VA /60 Hz 208 V AC VA /60 Hz 277 V AC VA /60 Hz V AC VA /60 Hz V AC VA /60 Hz V AC VA /60 Hz 600 V AC 1) VA V DC W V DC W V DC W V DC W V DC W V DC W Max. opening time ms Shunt trip unit VL00 UL PG frame Response voltage U s U s Pick-up (circuit-breaker is tripped) V Power consumption (short time) at 50/60 Hz 24 V AC VA /60 Hz V AC VA /60 Hz V AC VA /60 Hz V AC VA /60 Hz V AC VA V DC W V DC W V DC W V DC W Max. opening time ms Max. duration of operating voltage s interrupts automatically, less than 10 ms interrupts automatically, less than 10 ms 1) On request. Siemens LV 1 Add-On 10/2006 /55

60 General data Type VL150 UL DG frame -- x VL250 UL FG frame -- x VL400 UL JG frame -- x VL400X UL LG frame VL800 UL MG frame VL1200 UL NG frame x -- VL00 UL PG frame x -- Motorized operating mechanism Motorized operating mechanism with spring energy store (synchronizable) -- x -- x Motorized operating mechanism Power consumption VA/W < 250 < 250 Rated control supply voltage U s 50/60Hz V AC / / V DC / / / Melting fuse A (gg operational class, characteristic slow) Miniature circuit-breakers (MCBs) A Operating range V x U s x U s Minimum command duration at U s ms Max. command duration, depends on circuit 1) Non-maintained or continuous command Non-maintained or continuous command Total make-time s < 5 < 5 Break-time s < 5 < 5 Interval time between s > 5 > 5 OFF and ON commands Interval time between s > 5 > 5 ON and OFF commands Max. permissible switching frequency 1/h Motorized operating mechanism with spring energy store (synchronizable) Power consumption VA/W < 100 < 100 < 200 < 250 < Rated control supply 50/60Hz V AC / / voltage U s V DC 24 / / / Melting fuse A (gg operational class, characteristic slow) Miniature circuit-breakers (MCBs) A Operating range V x x x x x U s U s U s U s U s Minimum command duration at U s ms Max. command duration, depends on Non-maintained continuous command circuit 1) or Total make-time ms < 100 < 100 < 100 < 100 < Break-time s < 5 < 5 < 5 < 5 < Interval time between s > 5 > 5 > 5 > 5 > OFF and ON commands Interval time between s > 1 > 1 > 1 > 1 > ON and OFF commands Max. permissible switching frequency 1/h x Available -- Not available 1) Changeover contact also permissible, note Interval times between ON and OFF commands /56 Siemens LV 1 Add-On 10/2006

61 Project planning aids Characteristic curves General information The indicated tripping values for the inverse-time delayed overcurrent trip units (thermal overload releases, "L" trip units) are mean values taken from the spread of all setting ranges from the cold state and under even load conditions on the conducting paths. The tripping characteristic curves of the instantaneous (electromagnetic) short-circuit releases ("I" trip units) are based on the phase rated current I n. For thermal-magnetic trip units (TM), the following applies The characteristic curves apply to the cold state at operating temperature, the tripping times of the thermal trip units are reduced to approximately 25 %. Under normal operating conditions, all three poles of the device must be loaded. The three main conducting paths must be connected in series in order to protect single-phase or DC loads. Tripping characteristic curves of the SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers for generator protection with solid-state overcurrent trip units. The tripping times of the inverse-time delayed overcurrent trip units apply to the non-preloaded (cold) state. In the operating/warm state (after application of a load at the rated current), the tripping times are reduced to 33 %. After a tripping operation due to overcurrent, the tripping times are reduced in accordance with the dynamic tripping response, which means that a cooling time of a few minutes is required before the next motor start. Detailed time/current characteristic curves, current limiting characteristic curves and I 2 t curves can be ordered from "Technical Assistance" ( technicalassistance@siemens.com) or downloaded from the following Internet site http// Dimensional drawings VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Circuit-breakers SENTRON VL150 UL/VL250 UL (DG frame and FG frame) circuit-breaker SENTRON VL150 UL (DG frame) circuit-breaker SENTRON VL250 UL (FG frame) circuit-breaker SENTRON VL150 UL and VL250 UL (DG frame and FG frame) circuitbreaker assembly note Z 4-(250) 2.5-(0) X X Y x Ø & & # # # # # % #! #! #! # $ & " % # # % " # #! " ' & # #! #! 2 % # ' # $ #! # & & # # " #! ' # " # % " 2 # #! 2 " # # " 2 Y NSE0_ % %! & 32 $! Note The 5.5 mm extension at each end of the SENTRON VL250 UL (FG frame) circuit-breaker only applies when using box terminals or round cable terminals (8). Siemens LV 1 Add-On 10/2006 /57

62 * *, ) ) " + 3VL Molded Case Circuit-Breakers Project planning aids VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Operating mechanisms Motorized operating mechanism with spring energy store " # # % " %! & $ # # & " # % % ' & # $! # & # & & # % # % + " " % # # ' # 5 - % % " = % " # & "! $ Front-operated rotary operating mechanism " # " # %! & $ # " ' % # $ # & , # & & # , % # + " " % # # ' # 5 - % % # = % " # $ # " "! $! (1) Safety locks (2) Front-operated rotary operating mechanism (3) Padlock (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (5) Step for cover (6) Outside surface of cabinet door (7) Motorized operating mechanism with spring energy store (8) Terminal insulation Terminals Circuit-breaker with rear terminals long and short!!! & # & &! ' " 2 "! 2 # (4) Threaded rear terminals, round stock (long) (5) Threaded rear terminals, round stock (short) (7) Installation level (8) Rear flat connector (long) (9) Rear flat connector (short) & " # N % # # # & #! & $ $ % & # % # $!! ' 5 - &! # Type A B C D VL150 UL (DG frame) VL250 UL (FG frame) /58 Siemens LV 1 Add-On 10/2006

63 Project planning aids VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Locking device for toggle lever 35,9 27,7 6, ,3 28,3 60,2 30,1 Rear interlocking module 20,3 NSE0_01555 Rear interlocking module for plug-in/withdrawable circuit-breakers, with front connection For more detailed dimensional drawings, see installation instructions for rear interlocking module 35 (3P) 70 (4P) Rear interlocking module 38,1 233,2 212,6 38,1 NSE0_ ,9 37,2 44,8 212,5 17,5 4 x Ø 5,5 Mounting plate, example 1, not included in scope of supply 98 Ø14 Y 17,5 2 x Ø 4,5 X Y 3-6 mm A NSE0_01549a,5 NSE0_01553 Type VL150 UL (DG frame), VL250 UL (FG frame) A 194 Mounting plate, example 2, not included in scope of supply 32 mm x 32 mm x 3 mm x 457 mm 3-6 mm 6 x M6 6 x - M6 2,0 Nm NSE0_01554a Siemens LV 1 Add-On 10/2006 /59

64 # 5 - &! $ 3VL Molded Case Circuit-Breakers Project planning aids VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Accessories Circuit-breaker with door-coupling rotary operating mechanism "! ' ) 1 ' $ % # % # " " & $ # # & % % ) $ 1 & N & $ & #! % Masking frame for door cut-out for circuit-breaker with toggle lever # #! ' $ $ #! & # " 5 - % % % " ' # # Masking frame for door cut-out for circuit-breaker with operating mechanism %! & $ # 5 - % % & % " # % #! (2) Door-coupling rotary operating mechanism (3) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (4) Masking frame for door cut-out (for circuit-breaker with toggle lever) (6) Outside surface of cabinet door (7) Installation level (10) Support bracket (11) Extension (12) Center line of operating shaft /60 Siemens LV 1 Add-On 10/2006

65 VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Door cut-outs Door cut-out for toggle lever (without masking frame)! " &! $ $ & 5 - % % ' = 3VL Molded Case Circuit-Breakers Door cut-out for front-operated rotary operating mechanism and motorized operating mechanism with spring energy store (without masking frame) ' % " & # 5 - % & # ' ' # Project planning aids Door cut-out Door-coupling rotary operating mechanism Door cut-out for toggle lever (with masking frame) Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism with spring energy store and extended escutcheon (with masking frame) Hole pattern and cut-out for plug-in base with rear connecting bars Hole pattern and cut-out for rear terminals, ) * + " N " # " #! #! # $ # 5 - % & =! # $ # " # # ' # " $ $ # # $ # & % " 2! #! 2 % # " # # % # # " # &! 5 - % & # # # ' % ' # 5 - % &! = %! # " % # & " " " # ' " ' & #! # " 2! # $ % =! &! $ # %! &! # " 2 %! 2! # 5 - % & # = & $ " 2 $ $! 2 2 Door hinge point, Note A minimum distance between reference point Y and the door hinge is required for the door cut-outs. D > A from table + (P x 5) 5 - % & $ # #! 2 " # # " 2 % " 2 % #! #! 2 Type A B C D VL150 UL (DG frame) VL250 UL (FG frame) Combination A Circuit-breaker only 100 Circuit-breaker + plug-in base motorized operating mechanism with spring energy store Circuit-breaker + plug-in base front-operated rotary operating mechanism Circuit-breaker + withdrawable version 200 Siemens LV 1 Add-On 10/2006 /61

66 Project planning aids VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Plug-in bases and accessories Plug-in base with front connecting bars Hole pattern for plug-in base with front connecting bars (9) Z (4P) 99 (3P) Y (9) (8) 70 (4P) 35 (3P) 17.5 (6) x 5.5 Y 98 X X X (4) (9) NSE0_01837 (8) (7) Plug-in base with rear flat bar connection (4P) (3P) Z Y (2) (1) X X (2) NSE0_01838 (1) (7) (3) X (2) (7) Z (3) x Ø (1) Plug-in base with rear terminal covers (2) Plug-in base (3) Plug-in base with rear flat bar connection (4) Masking frame for door cut-out (for circuit-breaker with toggle lever) (6) Outside surface of cabinet door (7) Installation level (8) Plug-in base with front connecting bars (9) Plug-in base with terminal covers on the front * Extended middle phase with 3-pole circuit-breaker * ) /62 Siemens LV 1 Add-On 10/2006

67 Project planning aids VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Withdrawable version and accessories SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with motorized operating mechanism with spring energy store (connected position) (4) (2) (1) (3) Z NSE0_01839 SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with motorized operating mechanism with spring energy store (disconnected position) Z (1) (4) (2) (3) NSE0_01840 (8) C L (8) C L X X (11) 1-3 (11) (6) (10) (7) (6) (10) (7) SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with front-operated rotary operating mechanism (connected position) Z (2) (1) (3) NSE0_01841 SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with front-operated rotary operating mechanism (disconnected position) (3) (2) Z 61.5 (1) NSE0_01842 (9) C L (9) C L X X (4) (4) 1-3 (6) (11) (10) (7) 1-3 (6) (10) (7) (1) Plug-in base with terminal covers (2) Plug-in base (3) Circuit-breaker (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Installation level (8) Motorized operating mechanism with spring energy store (9) Front-operated rotary operating mechanism (10) Locking device for racking mechanism (11) Racking mechanism Siemens LV 1 Add-On 10/2006 /63

68 Project planning aids VL150 UL (DG frame) and VL250 UL (FG frame), 3- and 4-pole, up to 250 A Withdrawable version and accessories SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with extended escutcheon (connected position) SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with extended escutcheon (disconnected position) 13 (4) 45 (3) (2) Z 61.5 (1) NSE0_ (3) (2) Z 61.5 (1) NSE0_01844 (8) C L (8) C L X X (6) (11) 1-3 (10) (7) (6) 1-3 (10) (11) (7) Dimensions of extended escutcheon # & # # &! " # ' $ # & (1) Plug-in base with terminal covers (2) Plug-in base (3) Circuit-breaker (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Installation level (8) Extended escutcheon (10) Locking device for racking mechanism (11) Racking mechanism 5 - % & = " Dimensions of withdrawable version %! & $ # 5 - % ' % # % " # # $ " # #! 2 & % " 2 % & & # /64 Siemens LV 1 Add-On 10/2006

69 VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Circuit-breaker SENTRON VL400 UL (JG frame) and VL400X UL (LG frame) circuit-breakers Circuit-breaker installation instructions Project planning aids Z Y Ø8.3 (JG-Frame) Ø10.7 (LG-Frame) 89 (4P) Y # X X X (9) NSE0_ (3P) (4P) x Ø Motorized operating mechanism with spring energy store 61.5 "! " " " #! % %! ' # # # & # 1 1 # "! " # # & & # " # 5 - % & & > $ ' #! ' Front-operated rotary operating mechanism $! % ' # "! " $ # " # " & & " & # " # " #! ' # # 5 - % & ' > 1! ' $ ' # # " # # ' (1) Safety lock (2) Front-operated rotary operating mechanism (3) Padlock (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Motorized operating mechanism with spring energy store (8) Installation level (9) Toggle lever extension Siemens LV 1 Add-On 10/2006 /65

70 Project planning aids VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Terminals Z (JG-Frame) 138* ) (LG-Frame) Only for VL400 UL (JG frame) Z (8) (8)/ (9) 182 (4P) (3P) Y (4) min. X X 11 X 14.5 (5) (9) M12x NSE0_ (JG-Frame) 82 * ) (LG-Frame) (7) (4) Rear terminal (long) (5) Rear terminal (short) (7) Installation level (8) Rear flat connector (long, VL400 UL, JG frame) (9) Rear flat connector (short, VL400 UL, JG frame) * Rear terminals for VL400X UL (LG frame) are flat connectors. For more detailed dimensional drawings, see installation instructions for rear terminals. Rear interlocking module Rear interlocking module for plug-in/withdrawable circuit-breakers for front connection For more detailed dimensional drawings see installation instructions for rear interlocking module 89 (4P) Y 44,5 (3P) 22 (3P+4P) Y 3-6 Type VL400 UL (JG frame) and VL400X UL (LG frame) A ,5 38 Ø 25 2 x Ø 0,9 X A 29, x Ø 7,1 NSE0_01562 Rear interlocking module 32,8 22,9 4 x 8,3 431,8 69,9 NSE0_ ,1 59,8 369,4 409,1 3,8 /66 Siemens LV 1 Add-On 10/2006

71 # VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Locking device for toggle lever 3VL Molded Case Circuit-Breakers Project planning aids J G E F A NSE0_01556 D B G H C K Type a b c d e f g h I k 3VL VL VL Accessories Plug-in base for door-coupling rotary operating mechanism " ' )! 1! 1 9 0! ) $ 1 & $ # $ # # 5 - & " % $ # '! ' N " ' $ # % Masking frame for door cut-out for circuit-breaker with toggle lever $ # $ 5 - % ' %! 1.. # % %! & # (3) Circuit-breaker (6) Outside surface of cabinet door (7) Installation level (9) Door-coupling rotary operating mechanism (10) Masking frame for door cut-out (for circuit-breaker with toggle lever) (11) Support bracket (12) Center line of operating shaft Siemens LV 1 Add-On 10/2006 /67

72 Project planning aids VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Door cut-outs Door cut-out for toggle lever operating mechanism (without masking frame) Door cut-out for front-operated rotary operating mechanism and motorized operating mechanism with spring energy store (without masking frame) Door cut-out Door-coupling rotary operating mechanism $ " # 5 - % ' = $ # "! # & %! # 5 - % '!! # $ $ # # 5 - % ' " > % " " & & " " & & " N # # Door cut-out for toggle lever operating mechanism (with masking frame) ' # " $ # " N # # Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism with spring energy store and extended escutcheon (with masking frame) $ & $ N # # Hole pattern and cut-out for plug-in base with rear flat connecting bars " " " #! 2 & ' " 2 % % # # # " # & # 5 - % ' # > # # ' " # 5 - % ' $ > ' # & #! # $ # & ' # # # # "! & & $ % # & % # # "! & 5 * % ' % > $ " # '! 2 %! # " 2 Hole pattern and cut-out for rear-mounting terminals 4 x Ø (4P) Door hinge point, Note A minimum distance between reference point Y and the door hinge is required for the door cut-outs Y X % & $ 6 x 36.5 (3P) 8 x 36.5 (4P) D > A from table + (P x 5) NSE0_ (4P) Combination A Circuit-breaker only 150 Circuit-breaker + plug-in base motorized operating mechanism with stored-energy feature Circuit-breaker + plug-in base front-operated rotary operating mechanism Circuit-breaker withdrawable version /68 Siemens LV 1 Add-On 10/2006

73 3VL Molded Case Circuit-Breakers Project planning aids VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Plug-in bases and accessories (9) 210 Z (4P) 129 (3P) 64.5 Y Hole pattern for plug-in base with front connecting bars (2) 9.5 (8) Ø (3P) 89 (4P) x Ø7.1 Y X X X (6) (8) (7) NSE0_ (9) (1) Z (1) 173 (4P) 129 (3P) 64.5 Y X (6) 1-3 X (2) (7) Ø11 (3) (2) (2) X NSE0_ (1) Plug-in base with rear terminal covers (2) Plug-in base (3) Plug-in base with rear flat connecting bars (6) Outside surface of cabinet door (7) Installation level (8) Plug-in base with front connecting bars (9) Plug-in base with terminal covers on the front * Extended middle phase with 3-pole circuit-breaker 330 (1) 2-6 (3) 107.5* ) Siemens LV 1 Add-On 10/2006 /69

74 Project planning aids VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Plug-in bases and accessories Plug-in base for front-operated rotary operating mechanism (connected position) Plug-in base for front-operated rotary operating mechanism (disconnected position) " $ # " & # # Z " & ' # # # % Z X X " " $! % 5 - & # $! % 5 - & # Plug-in base for motorized operating mechanism with spring energy store (connected position) Z Plug-in base for motorized operating mechanism with spring energy store (disconnected position) Z (8) (8) X X (4) (6) 1-3 (11) (10) (1) (7) NSE0_01853 (4) (6) 1-3 (11) (10) (1) (7) NSE0_01854 (1) Plug-in base with terminal covers (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Installation level (8) Motorized operating mechanism with spring energy store (9) Front-operated rotary operating mechanism (10) Locking device for racking mechanism (11) Racking mechanism /70 Siemens LV 1 Add-On 10/2006

75 Project planning aids VL400 UL (JG frame) and VL400X UL (LG frame), 3- and 4-pole, up to 600 A Plug-in bases and accessories Plug-in base for extended escutcheon (connected position) Z 46.5 Plug-in base for extended escutcheon (disconnected position) Z (8) (8) X X (4) (11) (6) 1-3 (10) (1) (7) NSE0_01855 (4) (11) (6) 1-3 (10) (1) (7) NSE0_01856 Extended escutcheon mounted on withdrawable version & # " " # "! ' # " 1.. & # $ # # # # " 2 &! 2 Locking devices for racking mechanism 5 - & % # = (1) Plug-in base with terminal covers (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (6) Outside surface of cabinet door (7) Installation level (8) Extended escutcheon (10) Locking device for racking mechanism (11) Racking mechanism Siemens LV 1 Add-On 10/2006 /71

76 Project planning aids VL800 UL (MG frame), 3- and 4-pole, up to 800 A Circuit-breaker SENTRON VL800 UL (MG frame) circuit-breaker % $ # # # & ' " # $! # " 2 $! # $! # Circuit-breaker installation instructions ' # " 2! # # $ % # & # " # # & $ " $ # " # % #! #!!! #! " # " % # ' " # &! $ # $ % #!! # # '! 2 #! # " 2 ' # " %! # 5 - & # = " Operating mechanisms! % % " Motorized operating mechanism with spring energy store! $ # ' " # & ' $ " % " & $ " # '..! # % % "! # % #! 5 - & $ = $ & #! ' # ' # & & # # Front-operated rotary operating mechanism! $ & $ " #! "! $ & " & $ & #! ' # 5 - & % = " $ " # ' & ' ' " # ' # & # #! # % (1) Safety lock (2) Front-operated rotary operating mechanism (3) Padlock (4) Masking frame for door cut-out (for circuit-breaker with operating mechanism) (5) Step for cover (6) Outside surface of cabinet door (7) Motorized operating mechanism with spring energy store (8) Installation level (9) Toggle lever extension /72 Siemens LV 1 Add-On 10/2006

77 !! $! # % # $! # % #! $! $ $! # $! #!! % # % # # " # " " # " # 3VL Molded Case Circuit-Breakers Project planning aids VL800 UL (MG frame), 3- and 4-pole, up to 800 A Withdrawable versions Withdrawable version with front-operated rotary operating mechanism Insert position Withdrawable version with front-operated rotary operating mechanism Withdraw position "! " & #!! " & % # $!!!! " $!!!!!!!! 5 - " % & % & %! $ " 5 - " $ & %! ' #! & # " # # # & %! $ " Withdrawable version with motorized operating mechanism with spring energy store Insert position Withdrawable version with motorized operating mechanism with spring energy store Withdraw position " " " # " ' # & % # $! " ' #! $! #! #!!! 5 - " '! & % & %! $ 5 - " & " " % $ # & % & %! $! ' # " (1) Connected position (2) Masking frame for door cut-out (3) Outside surface of cabinet door (4) Installation level (5) Disconnected position Siemens LV 1 Add-On 10/2006 /73

78 !! 5 - # 3VL Molded Case Circuit-Breakers Project planning aids VL800 UL (MG frame), 3- and 4-pole, up to 800 A Withdrawable version with extended escutcheon (without masking frame) Insert position Withdrawable version with extended escutcheon (without masking frame) Withdraw position! " #!! " & % # 5 - #!! "!!!! & % & %! $ " & %! ' #! % $ # # & %! $ " (1) Connected position (2) Masking frame for door cut-out (3) Outside surface of cabinet door (4) Installation level (5) Disconnected position /74 Siemens LV 1 Add-On 10/2006

79 % " & %! $ % # # # # " " "! " #! ' # ' # 3VL Molded Case Circuit-Breakers Project planning aids VL800 UL (MG frame), 3- and 4-pole, up to 800 A Withdrawable versions % $ " 2! %! " 2 ' %! 2 % $ # # # % $ $ # # '! ' # # " 2! ' #! 2 $ $ 5 - # = Terminals Z (4P) Y (7) Installation level X X 485 NSE0_ (7) Ø Siemens LV 1 Add-On 10/2006 /75

80 3VL Molded Case Circuit-Breakers Project planning aids VL800 UL (MG frame), 3- and 4-pole, up to 800 A Interlocks Locking device for toggle lever G F E J Type a b c d e f g h I k 3VL VL VL A NSE0_01556 D B G H C K Rear interlocking module Rear interlocking module 3-pole circuit-breaker For more detailed dimensional drawings, see installation instructions for rear interlocking module 32,8 22,9 4 x 8,3 431,8 317,5 NSE0_ ,2 59,8 369,4 409,1 3,8 Rear interlocking module 4-pole circuit-breaker 9,5 571,5 89,4 63,5 55,4 NSE0_ ,2 45,5 Rear interlocking module NSE0_ (152,5 with withdrawable unit) /76 Siemens LV 1 Add-On 10/2006

81 5 - & # & 3VL Molded Case Circuit-Breakers Project planning aids VL800 UL (MG frame), 3- and 4-pole, up to 800 A Accessories Door-coupling rotary operating mechanism! #! ) $! 1 #! )!! ' ' # % ' # " #! $ '! ) $ 1! )! '! N # ' " # % Masking frame for door cut-out for circuit-breaker with toggle lever! # ' Masking frame for door cut-out for circuit-breaker with operating mechanism ' # # % # # " & 5 - & ' $! % 5 - & = % # " #! ' # $ & # Toggle handle extension % $ # " # # " "! "! " # 5 - & = (3) Circuit-breaker (4) Toggle handle extension (6) Outside surface of cabinet door (7) Installation level (9) Door-coupling rotary operating mechanism (10) Masking frame for door cut-out (for circuit-breaker with toggle lever) (11) Masking frame for door cut-out (for circuit-breaker with toggle lever) (12) Support bracket (13) Center line of operating shaft % Siemens LV 1 Add-On 10/2006 /77

82 Project planning aids VL800 UL (MG frame), 3- and 4-pole, up to 800 A Door cut-outs Door cut-out Door-coupling rotary operating mechanism Door cut-out for toggle lever (without masking frame) $ " % " N # # 5 - & = 5 - & = " " & & Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism with spring energy store and extended escutcheon (without masking frame) Door cut-out for toggle lever (with masking frame) Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism with spring energy store and extended escutcheon (with masking frame) # " " & &! ' % & "! # & % ' # $ # " # # 5 - &! = & " # ' $ % $ " %! # 5 - & " $ % " # $!!! % # " # $ # # '! # # ' # # 5 - & # = $!! " (1) Withdrawable version only 2 Door hinge point, Note A minimum distance between reference point Y and the door hinge is required for the door cut-outs. D > A from table + (P x 5) 5 - % & $ Combination A Circuit-breaker only 150 Circuit-breaker + plug-in base motorized operating mechanism with stored-energy feature Circuit-breaker + plug-in base front-operated rotary operating mechanism Circuit-breaker + withdrawable version 200 /78 Siemens LV 1 Add-On 10/2006

83 3VL Molded Case Circuit-Breakers Project planning aids VL1200 UL (NG frame) and VL00 UL (PG frame), 3- and 4-pole, up to 00 A Circuit-breaker SENTRON VL1200 UL (NG frame) circuit-breaker Circuit-breaker installation instructions % $ " 2 % $ % $ #! #! % # ' % " # % # #! $ # '! #! % # " # " 2! & & " # ' ' # " $ # !! 1 ' # % $ ' # ' # #! $ 5 - & %? #! " # $ & #! 2! # " 2 & '!!! # ' # % # # #! % # $ #! &! & " N % ' % " & # SENTRON VL00 UL (PG frame) circuit-breaker Circuit-breaker installation instructions % $ " 2 % $ % $! $! "! $! $ # " # " 2! &! 2 #! % " " %.. 11 N! % # % % # ' #! " # N N! &! & ' ' # " N %! $ % $! &! & 5 - & & = $! $ # (1) Toggle handle extension Siemens LV 1 Add-On 10/2006 /79

84 Project planning aids VL1200 UL (NG frame) and VL00 UL (PG frame), 3- and 4-pole, up to 00 A Operating mechanisms Motorized operating mechanism!! "!! %! #! " $ ' # & ' # $ " ' # # # # 5 - & ' >! $ Front-operated rotary operating mechanism!! $ #! $ # #! $! $ ' # & ' #! "!!! "! # 5 - &! = %!! # $ (1) Masking frame for door cut-out (for circuit-breaker with toggle lever) (2) Motorized operating mechanism (3) Front-operated rotary operating mechanism (4) Outside surface of cabinet door (5) Installation level (6) Safety lock /80 Siemens LV 1 Add-On 10/2006

85 ! $! # $ " #! $ & # $! #!! $ " # " ' # $ " # " ' # VL1200 UL (NG frame) and VL00 UL (PG frame), 3- and 4-pole, up to 00 A Withdrawable versions 3VL Molded Case Circuit-Breakers Project planning aids Withdrawable version with front-operated rotary operating mechanism Insert position Withdrawable version with front-operated rotary operating mechanism Withdraw position " % " #! & #! $ # # ' &! $ # # $!! $!! % #!!! 5 - # "!! 5 - #!! ' # # " "! "! # #! # # Withdrawable version with motorized operating mechanism with spring energy store Insert position Withdrawable version with motorized operating mechanism with spring energy store Withdraw position " & $ # " " # $ " % $ # " " #! # ' & $! # $ & #! $! # $! # $ " #! 5 - # $ =!! 5 - # #!!! ' # # "! "! (1) Connected position (2) Masking frame for door cut-out (3) Outside surface of cabinet door (4) Installation level (5) Disconnected position Siemens LV 1 Add-On 10/2006 /81

86 Project planning aids VL1200 UL (NG frame) and VL00 UL (PG frame), 3- and 4-pole, up to 00 A Withdrawable versions Withdrawable version with extended escutcheon (without masking frame) Insert position! % & #! $ # # ' & Withdrawable version with extended escutcheon (without masking frame) Withdraw position! $ # #!! Withdrawable versions 5 - # % " (1) Connected position (2) Masking frame for door cut-out (3) Outside surface of the cabinet door (4) Installation level (5) Disconnected position!! 5 - # & "! ' # # " # 373 (4P) 297 (3P) 148, ,5 44,5 249,5 19,5 Y ,5 119,5 X ,5 395,5 (4P) 319,5 (3P) Y 159,5 NSE0_ ,5 Z (6 x Ø 8) /82 Siemens LV 1 Add-On 10/2006

87 3VL Molded Case Circuit-Breakers Project planning aids VL1200 UL (NG frame) and VL00 UL (PG frame), 3- and 4-pole, up to 00 A Terminals (4P) Y (2) I Z Ø13 X ON I X 577 OFF O NSE0_01859 (2) (3) (2) Front connecting bars (only for VL00 UL) (3) Installation level Siemens LV 1 Add-On 10/2006 /83

88 Project planning aids VL1200 UL (NG frame) and VL00 UL (PG frame), 3- and 4-pole, up to 00 A Rear interlocking module Rear interlocking module For more detailed dimensional drawings, see installation instructions for rear interlocking module. 571,5 203,2 89,4 63,5 120,3 69, NSE0_ ,75 88,9 88,9 45,5 18,2 3-pole version NSE0_ pole version NSE0_ /84 Siemens LV 1 Add-On 10/2006

89 ! ' # % % # " # VL1200 UL (NG frame) and VL00 UL (PG frame), 3- and 4-pole, up to 00 A Interlocks Locking device for toggle lever 3VL Molded Case Circuit-Breakers Project planning aids J G E F A NSE0_01556 I D B G H C K Type a b c d e f g h I k 3VL VL VL Accessories Door-coupling rotary operating mechanism! # ' ) & ' 1! & "! $! # # " + N %! # 5 - &!? # Masking frame for door cut-out for circuit-breaker with toggle lever Z Y (1) X ON I X 80 (1) (3) 1-3 (5) NSE0_00832b OFF O (1) Masking frame for door cut-out (for circuit-breaker with toggle lever) (2) Door-coupling rotary operating mechanism (3) Outside surface of cabinet door (4) Support bracket (5) Installation level Siemens LV 1 Add-On 10/2006 /85

90 $ 3VL Molded Case Circuit-Breakers Project planning aids VL1200 UL (NG frame) and VL00 UL (PG frame), 3- and 4-pole, up to 00 A Door cut-outs Door cut-out for toggle lever (without masking frame) 5 - &!! = # " Door cut-out for front-operated rotary operating mechanism and motorized operating mechanism (without masking frame) 5 - &! " = #!!! Door cut-out for door-coupling rotary operating mechanism " N # # & & " " 5 - &! # = # % " " & & % % # $ " Door cut-out for toggle lever (with masking frame) 5 - &! $ = ' # $ # Door cut-out for front-operated rotary operating mechanism, motorized operating mechanism and extended escutcheon (with masking frame) " # ' % $ # # %! # $ " " % % $ # $! " " # " # # " # # $ " # ' # 5 - &! % = $! # # " /86 Siemens LV 1 Add-On 10/2006

91 3VL Molded Case Circuit-Breakers Project planning aids VL150 UL (DG frame) to VL00 UL (PG frame), 3- and 4-pole, up to 00 A Interlock with Bowden wire VL150 UL (DG frame), VL250 (FG frame) VL400 UL (JG frame), VL400X UL (LG frame) VL800 UL (MG frame) VL400 UL (JG frame), VL400X UL (LG frame) Combination options 5 -! ' 3VL LA01 for VL150 UL (DG frame) and VL250 UL (FG frame) Interlock with Bowden wire 3VL LA01 for VL150 UL (DG frame) and VL250 UL (FG frame) 3VL LA01 for VL400 UL (JG frame) and VL400X UL (LG frame) 3VL LA01 for VL800 UL (MG frame) 3VL LA01 for VL1200 UL (NG frame) and VL00 UL (PG frame) Combination possible 3VL LA01 for VL400 UL (JG frame) and VL400X UL (LG frame) 3VL LA01 for VL800 UL (MG frame) VL LA01 for VL1200 UL (NG frame) and VL00 UL (PG frame) Siemens LV 1 Add-On 10/2006 /87

92 Project planning aids Schematics The graphical symbols used in the circuit diagrams provide information about the type, circuit and mode of operation of the devices, but contain no information about the design. F3 F2 C1 D1 N A1 As it is not possible to show all of the potential combinations here, it may be necessary to alter the schematics accordingly for different versions. The purpose of these circuit diagrams is merely to help improve the understanding of way in which the devices function. Rotary operating mechanism Leading auxiliary switch EMS EBS 7 10 NSE 00758a C1 C2 D1 U< D2 N N HS 1 AS Auxiliary switch Alarm switch Rotary operating mechanism Leading auxiliary switch EMS EBS 7 10 NSE0_00759c C2 K1HS AS 5 7 D Auxiliary switch 6 8 Alarm switch F1 + - Q1 K T1 L K T2 L K T3 K L T4 L N T5 15 T6 Connection diagram for SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers for system protection with thermal-magnetic overcurrent trip units Internal circuit diagram for SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers for system protection with solidstate overcurrent trip units N F3 F2 C1 D1 A1 C2 HS 1 3 D2 F1 + _ > > Q1 A1 F1 F2 F3 HS AS EBS EMS T1... T6 Main contacts Solid-state overcurrent trip unit Tripping solenoid for A1 Undervoltage trip unit Shunt trip unit Auxiliary switches Alarm switches Leading auxiliary switch from ON to OFF (installed in rotary operating mechanism) Leading auxiliary switch from OFF to ON (installed in rotary operating mechanism) Current transformers Rotary operating mechanism Leading auxiliary switch EMS EBS 7 10 NSE0_00760d 2 4 Auxiliary switch AS Alarm switch Q1 K T1 L K T2 L K T3 K L T4 L N T5 T6 Internal circuit diagram for SENTRON VL400 UL (JG frame) to VL00 UL (PG frame) circuit-breakers for system protection with solid-state overcurrent trip units /88 Siemens LV 1 Add-On 10/2006

93 Project planning aids L1 (L+) F L1 (L+) F S1 ON S1 ON S0 OFF S0 OFF -X20 S2A S2B LOCAL OFF Motorized operating mechanism with spring energy store MANUAL OFF/ CHARGE AUTO/ HANDLE OFF/0 ON/1 MANUAL -X20 S2A S2B Motorized operating mechanism with spring energy store MANUAL OFF/ CHARGE AUTO/ HANDLE OFF/0 ON/1 MANUAL Y1 LOCK OUT Y1 LOCAL OFF LOCK OUT N (L2,L-) S0 S1 S2 S4 Y1 F S01 K1 F CB OPEN -X20 CB CLOSED 1 OFF (to be provided by customer) ON (to be provided by customer) Selector switch auto/manual Interlocking switch Closing solenoid Fuse in control circuit Remote control (to be provided by customer) Contactor relay (to be provided by customer) Motorized operating mechanism with spring energy store for SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers without undervoltage trip units M NSE0_00761d 5 PE N (L2,L-) S0 S1 S2 S4 Y1 F S01 K1 CB OPEN CB CLOSED S4 F -X20 1 OFF (to be provided by customer) ON (to be provided by customer) Selector switch auto/manual Interlocking switch Closing solenoid Fuse in control circuit Remote control (to be provided by customer) Contactor relay (to be provided by customer) Motorized operating mechanism with spring energy store for SENTRON VL400 UL (JG frame) to VL800 UL (MG frame) circuit-breakers without undervoltage trip units M NSE0_00762c 5 PE L1 (L+) F S01 S1 ON S0 OFF 7 8 Alarm switch L1 (L+) F S01 S1ON S0 OFF 7 8 Alarm switch K1 -X S2A Y1 S2B LOCAL OFF Motorized operating mechanism with spring energy store MANUAL OFF/ AUTO/ CHARGE OFF/0 ON/1 MANUAL HANDLE LOCK OUT K1 -X S2A Y1 S2B LOCAL OFF Motorized operating mechanism with spring energy store MANUAL OFF/ CHARGE AUTO/ HANDLE OFF/0 ON/1 MANUAL LOCK OUT K1 CB OPEN CB CLOSED N (L2,L-) -X20 1 F S0 OFF (to be provided by customer) S1 ON (to be provided by customer) S2 Selector switch auto/manual Y1 Closing solenoid F Fuse in control circuit S01 Remote control (to be provided by customer) K1 Contactor relay (to be provided by customer) NSE0_00591d 5 PE Note a separate alarm switch (7-8) can be incorporated for automatic charging after a release. Automatic closing of a tripped circuit-breaker is not recommended, in order to prevent a switch of the circuit-breaker to a fault in the protected circuit. Motorized operating mechanism with spring energy store for SENTRON VL150 UL (DG frame) and VL250 UL (FG frame) circuit-breakers with undervoltage trip units M K1 N (L2,L-) F S0 S1 S2 S4 Y1 F S01 K1 CB OPEN CB CLOSED S4 -X20 1 OFF (to be provided by customer) ON (to be provided by customer) Selector switch auto/manual Interlocking switch Closing solenoid Fuse in control circuit Remote control (to be provided by customer) Contactor relay (to be provided by customer) NSE0_00763d Note a separate alarm switch (7-8) can be incorporated for automatic charging after a release. Automatic closing of a tripped circuit-breaker is not recommended, in order to prevent a switch of the circuit-breaker to a fault in the protected circuit. Motorized operating mechanism with spring energy store for SENTRON VL400 UL (JG frame) to VL800 UL (MG frame) circuit-breakers with undervoltage trip units M 5 PE Siemens LV 1 Add-On 10/2006 /89

94 3VL Molded Case Circuit-Breakers Project planning aids L1 (L+) F Motorized operating mechanism LOCAL ON LOCK OUT S4 S2 S1 ON S0 OFF -X CB OPEN INTERLOCK OPEN LOCK OUT N (L2,L-) -X20 1 F S0 OFF (to be provided by customer)) S1 ON (to be provided by customer) S2 Lock out S4 Interlock open F Fuse in control circuit S01 Remote control K1 Contactor relay CB CLOSED M LOCAL OFF NSE0_00764b 5 PE. " 5. # UNDERVOLTAGE TRIP UNIT.,, 5 - % $ $ = "S contact" is integrated into shunt trip unit Undervoltage and shunt trip unit for SENTRON VL150 UL (DG frame) to VL00 UL (PG frame) circuit-breakers. " 5.!. # SHUNT TRIP UNIT % $ % = Motorized operating mechanism for SENTRON VL1200 UL (NG frame) and VL00 UL (PG frame) circuit-breakers without undervoltage trip units L1 (L+) F S01 S1 ON K1 S0 OFF -X Motorized operating mechanism LOCAL ON LOCAL OFF 7 8 Alarm switch N (L2,L-) S0 S1 S2 S4 F S01 K1 K1 LOCK OUT -X20 S4 INTERLOCK OPEN F OFF (to be provided by customer) ON (to be provided by customer) Lock out Interlock open Fuse in control circuit Remote control Contactor relay 1 Note a separate alarm switch (7-8) can be incorporated for automatic charging after a release. Automatic closing of a tripped circuit-breaker is not recommended, in order to prevent a switch of the circuit-breaker to a fault in the protected circuit. Motorized operating mechanism for SENTRON VL1200 UL (NG frame) and VL00 UL (PG frame) circuit-breakers with undervoltage trip units S2 LOCK OUT CB OPEN CB CLOSED M NSE0_00592c 5 PE /90 Siemens LV 1 Add-On 10/2006

95 Appendix Siemens Contacts Worldwide At http// you can find details of Siemens contact partners worldwide responsible for particular technologies. You can obtain in most cases a contact partner for Technical support, Spare parts/repairs, Service, Training, Sales or Consultation/engineering. You start by selecting a Country, Product or Sector. By further specifying the remaining criteria you will find exactly the right contact partner with his/her respective expertise. Siemens LV 1 Add-On 10/2006 /91

96 Appendix Customer Support Configuration and software engineering Support in configuring and developing with customeroriented services from actual configuration to implementation of the automation project 2).I In the face of harsh competition you need optimum conditions to keep ahead all the time A strong starting position. A sophisticated strategy and team for the necessary support - in every phase. Service & Support from Siemens provides this support with a complete range of different services for automation and drives. In every phase from planning and startup to maintenance and upgrading. Our specialists know when and where to act to keep the productivity and cost-effectiveness of your system running in top form. Technical support Competent consulting in technical questions covering a wide range of customeroriented services for all our products and systems. Tel. +49 (180) Fax +49 (180) http// automation/support-request Online support The comprehensive information system available round the clock via Internet ranging from Product Support and Service & Support services to Support Tools in the Shop. Service on site With Service On Site we offer services for startup and maintenance, essential for ensuring system availability. Tel. +49 (180) ) http// automation/service&support Technical consulting Support in the planning and designing of your project from detailedactual-state analysis, target definition and consulting on product and system questions right to the creation of the automation solution 2). Repairs and Spare Parts In the operating phase of a machine or automation system we provide a comprehensive repair and spare parts service ensuring the highest degree of operating safety and reliability. In Germany Tel. +49 (180) ) Technical assistance Expert technical assistance 1) for Low-voltage controls and electrical installation. Tel. +49 (9 11) Fax +49 (9 11) Optimization and upgrading To enhance productivity and save costs in your project we offer high-quality services in optimization and upgrading 2) 1) Contact Technical assistance for product selection Old/new coding Competitor coding Special versions Special requirements Sales promotion (Infoline). Your regional contacts for sales support (prices, discounts, delivery times). Technical Support for commissioning support and after-sales services. 2) For country-specific telephone numbers go to our Internet site at http// /92 Siemens LV 1 Add-On 10/2006

SENTRON VL Series Product Specifications

SENTRON VL Series Product Specifications SENTRON VL Series Product Specifications VL 400 Frame 400 s Electronic Releases ETU TRIP RELEASE 315 12-315 3VL4731 - A 3-0AA0 400-400 3VL4740 - A 3-0AA0 3 = 3 poles All VL400 circuit-breakers are shipped

More information

Low-Voltage Controls and Distribution

Low-Voltage Controls and Distribution 3WT ir Circuit Breakers up to 4000 Catalog LV 35 009 Low-Voltage Controls and Distribution SIRIUS SENTRON SIVCON Order No. German/English: Catalog E86060-K100-101-8 E86060-K100-101-7-7600 Incl. PDF CD-ROM

More information

SENTRON Switching and Protection Devices Molded Case Circuit Breakers

SENTRON Switching and Protection Devices Molded Case Circuit Breakers SENTRON Switching and Protection Devices Molded Case Circuit Breakers /2 Introduction 3VL Molded Case Circuit Breakers up to 00 A General data /4 - Design /12 - Function /15 - Integration / - Configuration

More information

Air Circuit Breakers

Air Circuit Breakers Siemens AG 203 /2 Introduction 3WL air circuit breakers/ non-automatic air circuit breakers up to 6300 A (AC), IEC /8 Introduction /9 3-pole, fixed-mounted versions /6 3-pole, withdrawable versions /23

More information

3VT Kompaktleistungsschalter bis 630A

3VT Kompaktleistungsschalter bis 630A Katalog LV 36 AT Österreich - Auszug 2012 3VT Kompaktleistungsschalter bis 630A SENTRON Schutz-, Schalt- und Messtechnik www.siemens.com/lowvoltage 3VT1 Molded Case Circuit Breakers up to 160 A 1 Technical

More information

Air Circuit Breakers

Air Circuit Breakers Siemens AG 204 /2 Introduction 3WL air circuit breakers/ non-automatic air circuit breakers up to 6300 A (AC), IEC /8 Introduction /9 3-pole, fixed-mounted versions /6 3-pole, withdrawable versions /23

More information

Siemens AG 2007 July 2007 V 1 N s L w alog Ne Cat sirius Soft Starters 3RW40 for standard applications

Siemens AG 2007 July 2007 V 1 N s L w alog Ne Cat sirius Soft Starters 3RW40 for standard applications Catalog News LV 1 N July 2007 sirius Soft Starters for standard applications Related catalogs Contents Low-Voltage Controls and Distribution SIRIUS SENTRON SIVACON Order No.: Catalog E800-K1002-A101-A-700

More information

General data 5/37. Overview

General data 5/37. Overview General data Overview Benefits High short-circuit breaking capacity in the feeder Optimum usability in motor feeders for the special voltages 440 V, 480 V, 0 V and 690 V Compact design The are available

More information

3VT2 Molded Case Circuit Breakers up to 250 A

3VT2 Molded Case Circuit Breakers up to 250 A VT Molded Case Circuit Breakers up to 5 A Catalog VT Molded Case Circuit Breakers up to 5 A General data / - Overview Circuit breakers Switch disconnectors / - Overview / - Selection and ordering data

More information

SENTRON 3WL5 Air Circuit Breakers/ Non-Automatic Air Circuit Breakers according to UL 489/IEC

SENTRON 3WL5 Air Circuit Breakers/ Non-Automatic Air Circuit Breakers according to UL 489/IEC SENTRON 3WL5 Air Circuit Breakers/ Non-Automatic Air Circuit Breakers according to UL 89/IEC Catalog Technical Information SENTRON 3WL5 Air Circuit Breakers/Non-Automatic Air Circuit Breakers According

More information

Protective Devices: Circuit-Breakers 1 )

Protective Devices: Circuit-Breakers 1 ) Protective Devices: Circuit-Breakers 1 ) /2 Introduction SIRIUS circuit-breakers 1 ) up to 100 A / General data /20 For motor protection /22 For motor protection with overload relay function /23 For starter

More information

Siemens AG WT Air Circuit Breakers up to 4000 A. Catalog LV SENTRON. Answers for infrastructure.

Siemens AG WT Air Circuit Breakers up to 4000 A. Catalog LV SENTRON. Answers for infrastructure. 3WT Air Circuit Breakers up to 4000 A Catalog LV 35 011 SENTRON Answers for infrastructure. Related catalogs Low-Voltage Power Distribution and LV 10.1 Electrical Installation Technology Protection, Switching,

More information

VL Circuit Breaker Features & Benefits. powerful ideas RELIABLE SOLUTIONS

VL Circuit Breaker Features & Benefits. powerful ideas RELIABLE SOLUTIONS VL Circuit Breaker Features & Benefits powerful ideas RELIABLE SOLUTIONS A Solutions Oriented Circuit Protection Family The Tangram An ancient Chinese game in which a few simple components provide endless

More information

3VT1 Molded Case Circuit Breakers up to 160 A

3VT1 Molded Case Circuit Breakers up to 160 A Siemens AG 4 VT Molded Case Circuit Breakers up to 6 A Catalog Technical Information VT Molded Case Circuit Breakers up to 6 A / General data / Circuit breakers Switch disconnectors Accessories and Components

More information

Protection Equipment

Protection Equipment Protection Equipment Price Groups 101, 102, 121, 131, 143 /2 Introduction Motor Starter Protectors/ Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors up to 40 A new /7 General data /13 For motor protection

More information

3VF3 to 3VF8 Circuit-Breakers

3VF3 to 3VF8 Circuit-Breakers 3VF3 to 3VF8 Circuit-Breakers Accessories Operating mechanisms For other s for 3VF3 with knob Rotary drive, complete, scope of supply Cubicle door for 3VF6 Motor operating mechanism for 3VF3 Motor operating

More information

Siemens AG 2017 SENTRON. 3VA Molded Case Circuit Breakers with UL and IEC Certification. Edition 10/2017. siemens.com/3va

Siemens AG 2017 SENTRON. 3VA Molded Case Circuit Breakers with UL and IEC Certification. Edition 10/2017. siemens.com/3va SENTRON 3VA Molded Case Circuit Breakers with UL and IEC Certification Edition 10/2017 siemens.com/3va Related catalogs Low-Voltage Power Distribution and LV 10 Electrical Installation Technology SENTRON

More information

Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI

Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI . Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,

More information

SENTRON 3VT Molded Case Circuit Breakers up to 1600 A

SENTRON 3VT Molded Case Circuit Breakers up to 1600 A Siemens AG 4 SENTRON VT Molded Case Circuit Breakers up to 6 A Catalog LV 6 4 VT Molded Case Circuit Breakers up to 6 A VT Molded Case Circuit Breakers up to 5 A The products and systems described in this

More information

Siemens switchgear. Tried, tested, trusted. Circuit Breakers

Siemens switchgear. Tried, tested, trusted. Circuit Breakers * MP - Maximum etail Price Siemens Ltd. LV SG - Power Distribution Products MP Eff. 01-10-2014 13 MCCB: Sentron 3VT1...5 ated current - 16A to 1600A 3 and 4 pole versions Breaking capacity from 25kA to

More information

3VT5 Molded Case Circuit Breakers up to 1600 A

3VT5 Molded Case Circuit Breakers up to 1600 A VT5 Molded Case Circuit Breakers up to A Catalog Technical Information VT5 Molded Case Circuit Breakers up to A General data /2 - Overview Standard circuit breakers, releases / - Selection and ordering

More information

Control Circuit Protection

Control Circuit Protection Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC

More information

3VT5 Molded Case Circuit Breakers up to 1600 A

3VT5 Molded Case Circuit Breakers up to 1600 A VT Molded Case Circuit Breakers up to 6 A Catalog General data Siemens AG Overview Connecting sets 4 Switching unit 6 7 8 9 6 4 Accessories 7 8 9 4 NSO_9a 4 6 7 8 9 Molded case circuit breaker Multiple

More information

VL Circuit Breaker DG 150A frame

VL Circuit Breaker DG 150A frame VL Circuit Breaker DG 150A frame Breaker type Defined by the 3rd character of the catalog number G Global (UL, CSA, IEC, CE, CCC), interchangeable K Global, non-interchangeable W Global, 100% rated, non-interchangeable,

More information

3VU13, 3VU16 Circuit-Breakers

3VU13, 3VU16 Circuit-Breakers 3VU3, 3VU6 Circuit-Breakers Description The 3VU3, 3VU6 circuit-breakers are compact circuit-breakers for currents up to 80 A which operate according to the current limiting principle. The devices are used

More information

VL Circuit Breaker FG 250A frame Breaker type Defined by the 3rd character of the catalog number K Global, Non-interchangeable

VL Circuit Breaker FG 250A frame Breaker type Defined by the 3rd character of the catalog number K Global, Non-interchangeable VL Circuit Breaker FG 250A frame Breaker type Defined by the 3rd character of the catalog number K Global, Non-interchangeable Trip unit type Defined by the 5th character of the catalog number B Thermal-magnetic,

More information

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar

More information

Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV

Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV Switch Disconnectors Introduction Siemens AG 2010 Overview 3NP5 0 3NP5 2 3NP5 fuse disconnector range 3NP5 4 SENTRON 3NP5 fuse disconnectors are controls for the occasional manual ing/isolating of loads

More information

SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates

SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates Motor Starter Protectors/Circuit Breakers SIRIUS 3RV2 Motor Starter Protectors/Circuit Breakers up to 40 A Accessories Enclosures and front plates Overview Enclosures For stand-alone installation of 3RV20

More information

Protection Equipment. 5/2 Introduction

Protection Equipment. 5/2 Introduction Protection Equipment /2 Introduction SIRIUS 3RV2 Motor Starter Protectors/ Circuit Breakers up to 40 A /6 General data /12 For motor protection /14 For motor protection with overload relay function /1

More information

Siemens AG Price groups PG 14O, 41B, 41E, 41F, 41G, 41H, 41J, 42F, 42J

Siemens AG Price groups PG 14O, 41B, 41E, 41F, 41G, 41H, 41J, 42F, 42J Protection Equipment Siemens AG 2015 Click on the Article No. in the catalog PDF to access it in the Industry Mall and get all related information. Article-No. 3RA1943-2C 3RA1943-2B 3RA1953-2B 3RA1953-2N

More information

BETA Switching Switches and Light Indicators

BETA Switching Switches and Light Indicators Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET

More information

3RV1011-0DA15 CIRCUIT-BREAKER, SIZE S00,

3RV1011-0DA15 CIRCUIT-BREAKER, SIZE S00, Low-Voltage Controls and Distribution > Industrial Controls > Protection Equipment > Circuit Breakers/Motor Starter Protectors > Motor Starter Protectors SIRIUS RV up to 00 A RV0-0DA5 CIRCUIT-BREAKER,

More information

Industry Automation Control Components

Industry Automation Control Components Industry Automation Control Components SIRIUS 3RV2 Motor Starter Protectors SIRIUS 3RV21 Motor Starter Protectors can be easily and flexibly combined with other SIRIUS devices to reduce space requirements

More information

Siemens AG VT3 Molded Case Circuit Breakers up to 630 A

Siemens AG VT3 Molded Case Circuit Breakers up to 630 A Siemens AG VT Molded Case Circuit Breakers up to 6 A Catalog General data Overview Connecting sets 5 6 Switching unit 7 8 9 Accessies f plug-in and withdrawable devices 9 5 7 8 5 Accessies 6 6 7 8 9 NSO_a

More information

MOULDED CASE CIRCUIT BREAKERS BC160N

MOULDED CASE CIRCUIT BREAKERS BC160N D MOULDED CASE CIRCUIT BREAKERS BC160N D BC160N COMMERCIAL INFORMATION Circuit breakers...d4 Switch-disconnectors...D5 Connecting sets......d6 Mounting sets......d6 Switches...D7 Shunt trips...d7 Undervoltage

More information

3RW Soft Starters. General data. 6/2 Siemens LV 1 N SIRIUS Soft Starters 01/2008. Siemens AG 2008

3RW Soft Starters. General data. 6/2 Siemens LV 1 N SIRIUS Soft Starters 01/2008. Siemens AG 2008 Siemens AG 2008 General data The advantages of the SIRIUS soft starters at a glance: Soft starting and smooth ramp-down 1) Stepless starting Reduction of current peaks Avoidance of mains voltage fluctuations

More information

SENTRON Switching and Protection Devices Air Circuit Breakers

SENTRON Switching and Protection Devices Air Circuit Breakers SENTRON Switching and Protection Devices ir Circuit Breakers /2 Introduction 3WL ir Circuit Breakers 3WL ir Circuit Breakers/ Non-utomatic ir Circuit Breakers up to 6300 (C) / - Design /2 - Function /20

More information

3RW Soft Starters. General data. 6/4 Siemens LV

3RW Soft Starters. General data. 6/4 Siemens LV General data Overview The advantages of the SIRIUS soft starters at a glance: Soft starting and smooth ramp-down 1) Stepless starting Reduction of peaks Avoidance of mains voltage fluctuations during starting

More information

3VT3 Molded Case Circuit Breakers up to 630 A

3VT3 Molded Case Circuit Breakers up to 630 A Siemens AG 4 VT Molded Case Circuit Breakers up to 6 A Catalog Technical Infmation VT Molded Case Circuit Breakers up to 6 A / General data / Circuit breakers Switch disconnects Accessies and Components

More information

Power Supplies. 11/2 Introduction

Power Supplies. 11/2 Introduction Siemens AG 2009 Power Supplies 11 11/2 Introduction 4AV Non-Stabilized Power Supplies Filtered for Supply of Electronic Controls 11/4 General data 11/5 4AV2, 4AV4 power supplies, filtered, single-phase

More information

SENTRON Switching and Protection Devices Switch Disconnectors

SENTRON Switching and Protection Devices Switch Disconnectors SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP

More information

3VT Molded Case Circuit Breakers up to 1600 A

3VT Molded Case Circuit Breakers up to 1600 A Siemens AG VT Molded Case Circuit Breakers up to 6 A SENTRON Protection, Switching, Measuring and Monitoring Devices Catalog LV 6 Answers for infrastructure. Siemens AG Related catalogs Low-Voltage Power

More information

Siemens AG Industrial Controls. SIRIUS 3R_1* in sizes S00/S0 to S12 SIRIUS. Catalog Add-On IC 10 AO. Edition Answers for industry.

Siemens AG Industrial Controls. SIRIUS 3R_1* in sizes S00/S0 to S12 SIRIUS. Catalog Add-On IC 10 AO. Edition Answers for industry. Industrial Controls SIRIUS 3R_1* in sizes S00/S0 to S12 SIRIUS Catalog Add-On IC 10 AO Edition 2014 Answers for industry. Related catalogs Miscellaneous Industrial Controls IC 10 SIRIUS Products for Automation

More information

3NP1 Fuse Switch Disconnectors up to 630 A

3NP1 Fuse Switch Disconnectors up to 630 A Switch Disconnectors 3NP1 Fuse Switch Disconnectors up to 630 A Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors

More information

Product Line Overview. The Most Logically Designed Contact Assembly

Product Line Overview. The Most Logically Designed Contact Assembly Circuit Breakers & Supplementary Protectors 15 00 Amperes for UL, CSA & IEC Applications Product Line Overview -3 General Information Cutler-Hammer Series G Molded Case Circuit Breakers provide increased

More information

Miniature Circuit-Breakers (MCBs)

Miniature Circuit-Breakers (MCBs) Product Overview Miniature Circuit-Breakers (MCBs) Design Tripping characteristics Rated current I n Rated breaking capacity Power supply company product range 5SP3 E 16 - A Standard product range 5SQ2

More information

Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4.

Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4. Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type

More information

SIRIUS 3RU2 Thermal Overload Relays

SIRIUS 3RU2 Thermal Overload Relays Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to

More information

Manual. Industrial Controls. Protection Devices. SIRIUS 3RV Motor Starter Protectors. Edition 12/2017. siemens.com

Manual. Industrial Controls. Protection Devices. SIRIUS 3RV Motor Starter Protectors. Edition 12/2017. siemens.com Manual Industrial Controls Protection Devices Edition 12/2017 siemens.com Introduction 1 Standards 2 Industrial Controls Protection devices SIRIUS 3RV Motor Starter Protectors Manual Product description

More information

S200 UL 1077 Series S200. Supplementary protective devices. UL 1077 Series. Miniature. circuit breakers. S200 Supplementary protective devices

S200 UL 1077 Series S200. Supplementary protective devices. UL 1077 Series. Miniature. circuit breakers. S200 Supplementary protective devices UL 077 Series Supplementary protective devices The UL 077 Series miniature supplementary protector offers a compact solution for protection requirements. The devices are DIN rail mounted. The is available

More information

PKZ and PKE motor-protective circuit-breakers

PKZ and PKE motor-protective circuit-breakers PKZ and PKE motor-protective circuit-breakers Machinery and installation downtimes should be kept as short as possible. The PKZ fuseless motor-protective circuit-breakers combine short-circuit and overload

More information

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage

Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution

More information

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters

More information

DATA SHEET 3VT3 MCCB ACCESSORIES

DATA SHEET 3VT3 MCCB ACCESSORIES Issued June 7 DATA SHEET VT MCCB ACCESSORIES Based on Siemens Catalog LV 8 VT Molded Case Circuit Breakers up to A 7 Accessies and Components es Overview Type designation accding to contact arrangement

More information

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X Manual motor protectors Type MS116 Type MS32 Type MS4X Type MS49X Manual motor protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL ed and

More information

COMMERCIAL INFORMATION TECHNICAL INFORMATION BA511*33

COMMERCIAL INFORMATION TECHNICAL INFORMATION BA511*33 BA511*33 COMMERCIAL INFORMATION Type designation specification for ordering...146 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting

More information

XT IEC Power Control Manual Motor Protectors

XT IEC Power Control Manual Motor Protectors May 07 Product Selection Table 7. Rotary with Screw Terminals Global Ratings and North American Ratings Type and Type 2 Coordination Motor Protective Device with Thermal and Magnetic Trip Rated Uninterrupted

More information

BETA Low-Voltage Circuit Protection

BETA Low-Voltage Circuit Protection BETA Low-Voltage Circuit Protection /2 Introduction Miniature Circuit Breakers /4 5SP and 5SY miniature circuit breakers / 5SJ6...-.KS miniature circuit breakers with plug-in terminal /21 5SY6 0 miniature

More information

Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories

Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories Manual motor protectors Manual motor protectors Manual motor Protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certified

More information

Short form catalogue Motor protection and control Manual motor starters

Short form catalogue Motor protection and control Manual motor starters Short form catalogue Motor protection and control Manual motor starters Motor protection and control Index Contents Beneifits 4 Features 5 Overview 6 Manual motor starter MS116 and MS132 8 Manual motor

More information

Limit Switches and Safety

Limit Switches and Safety and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position

More information

SENTRON SIVACON ALPHA

SENTRON SIVACON ALPHA SENTRON SIVACON ALPHA Low-Voltage Power Distribution and Electrical Installation Technology Catalog Extract LV 10 Edition 10/2018 siemens.com/lowvoltage Related catalogs Low-Voltage Power Distribution

More information

SENTRON 3NP1 Fuse Switch Disconnectors up to 630 A

SENTRON 3NP1 Fuse Switch Disconnectors up to 630 A Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors Fuse monitoring possible throughout Busbar supports can be

More information

Product index. 4 - Manual motor protectors. Phone: Fax: Web: -

Product index. 4 - Manual motor protectors. Phone: Fax: Web:  - Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type

More information

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................

More information

Motor Starter Protectors

Motor Starter Protectors Motor Starter Protectors Industrial Controls Product Catalog 207 Section contents Section Overview /2 - /3 Motor Starter Protectors 3RV20 MSP, Class 0/20 /4 - /5 Circuit Breakers 3RV27, 3RV28 Circuit Breaker

More information

3VA Circuit Breaker Compact. Global. Next- Gen! Brandon Castro and Fred Myers Manufacturing in America 02/22-23/2017

3VA Circuit Breaker Compact. Global. Next- Gen! Brandon Castro and Fred Myers Manufacturing in America 02/22-23/2017 3VA Circuit Breaker Compact. Global. Next- Gen! Brandon Castro and Fred Myers Manufacturing in America 02/22-23/2017 3VA UL molded case circuit breaker Focus: 65kA@480V (100kA FS250A) TMTU-based Compact

More information

Motor Starter Protectors

Motor Starter Protectors Motor Starter Protectors Industrial Controls Product Catalog 09 Section contents Section Overview / - /3 Motor Starter Protectors 3RV0 MSP, Class 0/0 /4 - / Circuit Breakers 3RV7, 3RV8 Circuit Breaker

More information

3 - Protection components Motor circuit-breakers

3 - Protection components Motor circuit-breakers Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page

More information

Data sheet. CI-TI TM Contactors and Motor Starters Circuit Breakers CTI B1427

Data sheet. CI-TI TM Contactors and Motor Starters Circuit Breakers CTI B1427 Data sheet CI-TI TM Contactors and Motor Starters Circuit Breakers November 2002 DKACT.PD.C00.L2.02 520B1427 Introduction Circuit breakers/manual motor starters cover the power ranges 0.09-12.5 kw This

More information

Overload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview

Overload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors.

More information

24.4. Miniature Circuit Breakers and Supplementary Protectors. For Immediate Delivery or Tech Support call KMParts.com at (866)

24.4. Miniature Circuit Breakers and Supplementary Protectors. For Immediate Delivery or Tech Support call KMParts.com at (866) .4 Miniature Circuit Breakers and Supplementary Protectors SPHM Supplementary Protector SPHM Supplementary Protector Product Description The SPHM Supplementary Protector is a dual rated product for both

More information

max pole for t=15 ms

max pole for t=15 ms Types RI 61 RI 61N RI 61J RI 62 RI 62J RI 63 RI 63N RI 64 single-pole single-pole + neutral pole single-pole (for DC circuits) two-pole two-pole (for DC circuits) three-pole three-pole + neutral pole three-pole

More information

Protectors. Manual motor. Types MS116, MS132, MS45x, MS49x. MS Series. Manual motor protectors. Type MS116. Type MS132. Type MS45x.

Protectors. Manual motor. Types MS116, MS132, MS45x, MS49x. MS Series. Manual motor protectors. Type MS116. Type MS132. Type MS45x. Types MS116, MS132, MS5x, MS9x are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/OFF control, and protection against short circuit,

More information

Critical Power Switchboards. Selection and Application Guide

Critical Power Switchboards. Selection and Application Guide Selection and Application Guide Siemens RCIII (rear connected) switchboards utilizing Siemens Type SB Encased Breakers are a perfect solution for your critical power distribution needs. Whether your installation

More information

ACS motor protection circuit breakers KT 7 Introduction

ACS motor protection circuit breakers KT 7 Introduction Introduction Automatic Type 2 coordination The right circuit breaker for all applications The KT 7 circuit breaker family consists of two basic frame sizes of mm and 5 mm in three variations with different

More information

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X

Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X Manual motor protectors Type MS116 Type MS32 Type MS4X Type MS49X Manual motor protectors Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certifi ed for

More information

Motor Protection Circuit Breakers 3VU13 and 3VU16

Motor Protection Circuit Breakers 3VU13 and 3VU16 Motor Protection Circuit Breakers 3VU13 and 3VU16 3VU13/3VU16 is suitable for use in fuseless motor feeders upto 11KW/22KW (25A/63A) respectively. 3VU motor protection circuit breakers are used for protection

More information

MULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers

MULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers IEC Rated C60N/H/L Circuit Breakers Standard Features Fast Closing Allows increased withstand to the high inrush currents of some loads Trip-free mechanism: Contacts cannot be held in the on position when

More information

SIVACON S4 Power Distribution Boards

SIVACON S4 Power Distribution Boards SIVACON S4 Power Distribution Boards Totally Integrated Power SIVACON Catalogue LV 56 Edition 2015 siemens.com/lowvoltage Related catalogs Contents Low-Voltage Power Distribution and LV 10 Electrical Installation

More information

S200 UL 489 Series. Miniature circuit breakers S200. Features. Description

S200 UL 489 Series. Miniature circuit breakers S200. Features. Description UL 489 Series UL 489 Series Description The Series miniature circuit breaker offers a compact solution for protection requirements. The U AND UP devices are UL 489 tested limiting and DIN rail mounted.

More information

3TM Vacuum Contactors

3TM Vacuum Contactors Catalog Extract HG 11.23 Edition 2016 Catalog Extract Medium-Voltage Equipment siemens.com/3tm R-HG11-343.psd 2 Siemens HG 11.23 2016 Contents Medium-Voltage Equipment Catalog Extract HG 11.23 2016 Contents

More information

Item Code Description Quantity 3NA LV HRC FUSE LINK S00 80A 690AC 250DC 30 3NA3832 LV HRC FUSE LINK GL/GG S00 125A 500VAC 250VDC 0

Item Code Description Quantity 3NA LV HRC FUSE LINK S00 80A 690AC 250DC 30 3NA3832 LV HRC FUSE LINK GL/GG S00 125A 500VAC 250VDC 0 Controlgear Products +27 () 11 97 116 sales@controlgear.co.za Siemens stock items on hand as at Mon, 3/4/218, 14:4 GMT+2 3NA3824-6 LV HRC FUSE LINK S 8A 69AC 25DC 3 3NA3832 LV HRC FUSE LINK GL/GG S 125A

More information

Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated

Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Switchgear Type 8DJH for Secondary Distribution Systems up to 24 kv, Gas-Insulated Medium-Voltage Switchgear Catalog HA 40.2 2010 Answers for energy. -HA40-110.eps -HA40-109.eps -HA40-112.eps -HA40-111.eps

More information

SION Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG

SION Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG Medium-Voltage Equipment Selection and Ordering Data Catalog HG 11.0 008 Answers for energy. R-HG11-17.tif Siemens HG 11.0 008 Contents Contents Page SION Vacuum Circuit-Breakers Description General Construction

More information

Siemens AG Catalog HG11.07 Edition 10/ AE6 Medium-Voltage Equipment. siemens.com/sion

Siemens AG Catalog HG11.07 Edition 10/ AE6 Medium-Voltage Equipment. siemens.com/sion Siemens AG 2018 Catalog HG11.07 Edition 10/ 2018 SION Lateral Vacuum Circuit-B Breaker with Laterrall Operating Mechaniism m 3AE6 Medium-Voltage Equipment siemens.com/sion 2 Catalog HG11.07 10 / 2018 SION

More information

The breakers offer thermal-magnetic trip protection according to Z and K characteristics.

The breakers offer thermal-magnetic trip protection according to Z and K characteristics. Series High Performance Circuit Breakers Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific

More information

ACW Molded-Case Circuit Breaker UL 489 Listed

ACW Molded-Case Circuit Breaker UL 489 Listed Motors Automation Energy Transmission & Distribution Coatings Molded-Case Circuit Breaker UL 489 Listed Overview Introducing the WEG Series of Molded Case Circuit Breakers now available with UL489 certification.

More information

Motors Automation Energy Transmission & Distribution Coatings. UMBW UL489 and UL1077 Thermal-Magnetic MCB

Motors Automation Energy Transmission & Distribution Coatings. UMBW UL489 and UL1077 Thermal-Magnetic MCB Motors Automation Energy Transmission & Distribution Coatings UMBW UL489 and UL1077 Thermal-Magnetic MCB UL489 AND UL1077 Circuit Protection Overview: Single pole and multi-pole thermal-magnetic minature

More information

For Operation in the Control Cabinet 3RW Soft Starters

For Operation in the Control Cabinet 3RW Soft Starters General Data Overview The advantages of the SIRIUS soft starters at a glance: Soft starting and smooth ramp-down 1) Stepless starting Reduction of current peaks Avoidance of mains voltage fluctuations

More information

01 Spectra Plus - Introduction

01 Spectra Plus - Introduction 01 Spectra Plus - Introduction Standard features Conforming to IS13947-2/EN60947 2 Compact dimensions Available in 3P & 4P High performance microprocessor protection release Wide overload setting from

More information

Siemens AG RW BB14 3RW BB14 3RW BB14. per PU three-phase induction opera- Rated Rated power of three-phase

Siemens AG RW BB14 3RW BB14 3RW BB14. per PU three-phase induction opera- Rated Rated power of three-phase Siemens AG 2008 3RW Soft Starters Selection and ordering data 28-1BB14 38-1BB14 47-1BB14 Ambient temperature 40 C Ambient temperature 50 C Size DT Order No. Price Rated Rated power of Rated Rated power

More information

WELCOME TO THE WORLD OF COMPLETE AUTOMATION. Innovative MCS Starter Solutions. MCS Starters and the New Mounting System 141A

WELCOME TO THE WORLD OF COMPLETE AUTOMATION. Innovative MCS Starter Solutions. MCS Starters and the New Mounting System 141A WELCOME TO THE WORLD OF COMPLETE AUTOMATION Innovative MCS Starter Solutions MCS Starters and the New Mounting System 141A Welcome to the Wide World of Allen-Bradley Starters Innovative solutions for state

More information

SION Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG

SION Vacuum Circuit-Breakers. Answers for energy. Medium-Voltage Equipment Selection and Ordering Data. Catalog HG Medium-Voltage Equipment Selection and Ordering Data Catalog HG 11.02 2011 Answers for energy. R-HG11-172.tif 2 Siemens HG 11.02 2011 Contents SION Vacuum Circuit-Breakers Medium-Voltage Equipment Catalog

More information

Series KTU7 UL489 Molded Case Circuit Breakers

Series KTU7 UL489 Molded Case Circuit Breakers Series KTU7 UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s KTU7 series of UL Molded Case Circuit Breakers are UL489 and CE listed

More information

Residual Current Protective Devices / Arc Fault Detection Devices (AFDDs)

Residual Current Protective Devices / Arc Fault Detection Devices (AFDDs) Introduction Overview Devices Page Application Standards Used in / Personnel, material and fire protection, as well as protection against direct contact. SIGRES with active condensation protection for

More information

Protection Equipment. Overload Relays. Reference Manual 04/2011. Industrial Controls. Answers for industry.

Protection Equipment. Overload Relays. Reference Manual 04/2011. Industrial Controls. Answers for industry. Protection Equipment Overload Relays Reference Manual 04/2011 Industrial Controls Answers for industry. Protection Equipment 2 3 7 7 8 9 14 1 16 17 18 18 19 20 2 26 27 28 29 30 32 37 38 40 42 Introduction

More information

SIRIUS 3RV2 motor starter protectors. Electrical Components for the Railway Industry

SIRIUS 3RV2 motor starter protectors. Electrical Components for the Railway Industry Electrical Components for the Railway Industry www.siemens.com/railway-components Introduction Motor Protection Page 2 2014-10-27 Description Motor Protection Description Spring-loaded and screw-type connection

More information

MOULDED CASE CIRCUIT BREAKERS BH630N, BH630S

MOULDED CASE CIRCUIT BREAKERS BH630N, BH630S MOULDED CASE CIRCUIT BREAKERS BH6N, BH6S F BH6N, BH6S COMMERCIAL INFORMATION Switching units, withdrawable device, plug-in device...f4 Switch-disconnector unit...f6 Connecting sets...f7 Mounting sets...f9

More information