1 Introduction Our Thanks to You The Cobra line of quality products includes: Operating Instructions Thank you for purchasing the Cobra Power Inverter CPI2590. Properly used, this Cobra product will give you many years of reliable service. How Your Cobra Power Inverter Works The Cobra power inverter is an electronic product that has been designed and built to take low voltage DC (Direct Current) power from your automobile or other low voltage power supplies and convert it to standard 115 volt AC (Alternating Current) power like the current you have in your home. This conversion process thereby allows you to use many of your household appliances and electronic products in automobiles, RVs, boats, tractors, trucks and virtually anywhere else. Customer CB Radios microtalk 2-Way Radios Radar/Laser Detectors Mobile GPS Navigation Systems HighGear Accessories CobraMarine VHF Radios Power Inverters Accessories Customer Customer Should you encounter any problems with this product, or not understand its many features, please refer to this owner s manual. If you require further assistance after reading this manual, Cobra Electronics offers the following customer assistance services: For in the U.S.A. Automated Help Desk English only. 24 hours a day, 7 days a week (phone). Customer Operators English and Spanish. 8:00 a.m. to 5:30 p.m. CT, Monday through Friday (except holidays) (phone). Questions English and Spanish. Faxes can be received at (fax). Technical English only. (on-line: Frequently Asked Questions). English and Spanish. ( ). For more information or to order any of our products, please visit our website: WATT POWER INVERTER CPI2590 Printed in China Part No P Version B For Outside the U.S.A. Contact Your Local Dealer 2015 Cobra Electronics Corporation 6500 West Cortland Street A1 Chicago, Illinois USA Nothing Comes Close to a Cobra Nothing Comes Close To A Cobra
2 Introduction Product Features Introduction Contents Features Three AC Receptacles Voltage & Power Meter 5V/2.4 USB Output Remote On/Off Capable Automatic Thermal Protection/Shutdown AC Outlets On/Off Power Switch Reverse Polarity Protection Low Battery Alarm Low Battery Shutdown Voltage Input & Power Output Indicators USB Outlet Remote On/Off Switch Jack Introduction Our Thanks to You... A1 Customer... A1 Product Features... A2 Important Safety Information... 1 Quick Evaluation Before...4 Requirements... 6 Mounting... 7 Connecting Cables... 8 Power Consumption Operation Turning Your Inverter On or Off Remote On/Off Switch Operating Indicators Operating Limits Troubleshooting Guide Specifications Negative Battery Cable Terminal (Black) Positive Battery Cable Terminal Cooling Fans (Red) Intro Operation Customer Intro Operation Customer Customer Maintenance...22 Product Service Optional Accessories Info A2 A3 25
3 Introduction Important Safety Information Important Safety Information Before installing and using your Cobra power inverter, please read these general precautions and warnings. and Statements To make the most of this inverter, it must be installed and used properly. Please read the installation and operating instructions carefully before installing and using it. Special attention must be paid to the CAUTION and WARNING statements in the manual. CAUTION Statements specify conditions which could cause damage to the unit or other equipment. WARNING Statements identify conditions that could result in personal injury or loss of life. General Precautions 1. Never install the inverter in a boat s engine compartment where gas and battery fumes are present. 2. Do not operate the inverter if it has been dropped or damaged in any way. 3. Do not open the inverter; it contains no user-serviceable parts. Attempting to service unit could cause electrical shock. NOTE Internal components remain charged after all power is disconnected. 4. Do not expose the inverter to rain, snow, bilge water or spray. 5. Do not obstruct the ventilation openings. 6. Do not install the inverter in zero-clearance compartment. CAUTION This inverter should be used in negative ground applications only. 1
4 Introduction Important Safety Information Introduction Important Safety Information WARNING Power inverters contain components that tend to produce arcs or sparks. To prevent fire or explosion, do not install the inverter in areas or compartments containing batteries or flammable materials or in locations that require ignition-protected equipment. WARNING To reduce the risk of fire, do not cover or obstruct the ventilation openings. Do not install inverter in zero-clearance compartment. Proposition 65: : Wash Hands After Handling Power Cord The power cord on this product contains lead, a chemical known in the state of California to cause birth defects or other reproductive harm. : Rechargeable Appliances Certain chargers for small nickel cadmium batteries can be damaged if connected to the Cobra 2500 watt inverter. Two particular types of equipment are prone to this problem: Plug In Directly Dangerous Voltages 1. Small battery-operated appliances such as flashlights, razors, and night lights that can be plugged directly into an AC receptacle to recharge. 2. Certain battery chargers for battery packs used in hand power tools. These chargers have a WARNING label stating that dangerous voltages are present at the battery terminals. This problem does not occur with the vast majority of battery operated equipment. Most use a separate charger or transformer that is plugged into the AC receptacle and produces a low voltage output. If the label on the AC adapter or charger states that it produces a low voltage AC or DC output (less than 30 volts), the inverter will have no problem powering the adapter safely. Cobra 2500 Watt Output Waveform Some very sensitive electronic equipment may not operate satisfactory on square wave or modified sine wave. The output waveform is referred to as square wave or modified sine wave. It is a stepped waveform designed to have characteristics similar to the sine wave shape of utility power. A waveform of this nature is suitable for most AC loads (including linear and switching power suppliers used in electronic equipment, transformers and motors). 2 3
5 Introduction Quick Evaluation Before Introduction Quick Evaluation Before in Icons Quick Evaluation Before This section provides you with basic information about the inverter and how to check its performance before installation. Be sure to have on hand: 1. A 12 volt DC power source (such as a vehicle battery). Connect Power Source The power source must provide between 11 and 15 volts DC and be able to supply enough current to run the test load. As a rough guide, divide the wattage of the test load by 10 to get the current (in amperes) the power source must deliver. 2. Cables to connect the power source to the inverter (not included). The cables must be as short and thick as possible in order to reduce the voltage drop between the power source and the inverter when it is drawing current from the power source. If the cable suffers an excessive voltage drop, the inverter may shut down when drawing higher currents because the voltage at the inverter dropped below 10 volts. #4 AWG stranded copper cable is recommended. It should be no longer than four feet (one and one-half meters). Intro Operation Customer condary Icons The other end of the cable, which connects to the power source, must be terminated with a lug or other connector that provides a secure, low resistance connection. For example, if the power source is a battery, the cable must be terminated with a battery terminal that clamps to the post on the battery. NOTE Use double cables for a full 2500 Watt load. 3. A test load that can be plugged into the AC receptacle on the inverter for short term testing at a low power level. The following cables are recommended for testing low power level test loads only. Test Load Test Load Power 100W 250W 500W Minimum Cable Size # 16 AWG copper # 12 AWG copper # 8 AWG copper To check your inverter s performance before installation: Power Button Connect Terminals Intro Operation Customer Connect Power Intro Source Operation Customer Intro Operation Customer Power Button Intro Connect Test Load Operation Customer USB Secondary Outlet Icons 1. Turn the inverter off (see page 14 for details). If the power source is a DC power supply, switch it off as well. 2. Connect cables to power input terminals (see page 8 for details). 3. Connect cables to power source (see page 8 for details). 4. Check to make sure all connections are secure. 5. Turn the inverter on. If the power source is a DC power supply, switch it on first. 6. Plug in the test load. The inverter should supply power to the load. If the inverter is not working properly, refer to the troubleshooting guide on page 20 or power and protection indicators section on page 16. NOTE A USB device can be used to check the output of the USB Outlet. 4 5
6 Requirements Mounting Requirements The inverter must be installed in an area that meets all of the following requirements: A. Dry Do not place in an area where water can drip or splash on the inverter. B. Cool Ambient air temperature should be between 30 F and 105 F (0 C and 40 C). The cooler the better. C. Ventilate Allow at least one inch (three cm) of clearance around the inverter for proper airflow. Make sure that ventilation openings on the ends of the unit are not obstructed. D. Safe Do not install the inverter in the same compartment as a battery or in any compartment that contains flammable liquids such as gasoline. E. Close to Battery Install unit as close to battery as possible (without being in the same compartment) to minimize the length of cable required to connect the inverter to the battery. It is better and cheaper to run longer AC wires than longer DC wires (cables). CAUTION To avoid fire, do not cover or obstruct ventilation openings. Do not install inverter in a zero-clearance compartment. Overheating may result. CAUTION The inverter must only be connected to batteries with a nominal output voltage of 12 volts. It will not work with a 6 volt battery, and will be damaged if it is connected to a 16 volt battery. Mounting WARNING This unit contains components which can produce arcs or sparks. To prevent fire or explosion, do not install in compartments containing a battery or flammable materials, or in a location which requires ignition protected equipment. WARNING This unit is suitable for installation in negative ground applications only. Do not attempt to install to a positive ground application. To mount your inverter: 1. Place the inverter on a flat surface with the mounting bracket against the mounting surface. Mounting Brackets 2. Mount to secure surface using mounting hardware that is corrosion resistant (not included). Mounting Hardware The inverter can be mounted horizontally or vertically. If mounted vertically, neither end of the unit should be at the top (to avoid foreign material from falling or settling into the unit). 6 7
7 ntro Operation Customer Icons Connecting Cables Connecting Cables (not included) Power wire and wiring are very important to the performance of the inverter. Because the inverter has a low voltage, high current input, low resistance wiring is essential between the battery and inverter. This is so it can deliver the maximum amount of energy to the load. NOTE Use double cables for a full 2500 Watt load. Use only copper wire. Aluminum wire has about one-third more resistance than copper wire of the same size, plus it is difficult to make good, low-resistance connections to aluminum wire. We recommend #4 AWG copper cable (90 C insulation rating) as the minimum size for connections between the battery and inverter. Keep the cable length as short as possible, no more than four feet (one and a half meters). This will keep the voltage drop to a minimum. If the cable has too much voltage drop, the inverter may shut down when Main drawing Icons higher currents because voltage at the inverter may drop below 10 volts. If you must use longer cables, choose thicker cables, such as #2 AWG. Connecting Cables 2. Connect cables to the Power Input Terminals on input end of the inverter. The red terminal is positive (+) and the black terminal is negative (-). It is a good idea to check and tighten these screws from time to time. They can become loose by vibrations or thermal cycling. Attach Cables 3. Connect cables to the power source: a. Connect the cable from the Negative (Black) Terminal of inverter to the Negative Terminal of the power source. Make a secure connection. Intro Operation Customer To connect the cables between the inverter and the battery: 1. Press the Power Button on the inverter to the off position. If the power source is a DC power supply, switch it off as well. Power Button Intro Operation Customer NOTE Please install the supplied plastic protector boots on the input terminals to prevent a short circuit. 8 9
8 Connecting Cables Connecting Cables b. Connect the cables from the Positive (Red) Terminal of the inverter to the Positive Terminal of the power source (the battery s main fuse or the battery selector switch, if you are using one). Make a secure connection. Connect Power Source NOTE Please use the double cables for a full 2500 Watt output. You might observe a spark when you make this connection since current can flow to charge capacitors in the inverter. All power connections to your Cobra inverter must be Positive to Positive and Negative to Negative. CAUTION Electrical installations must meet local and national wiring codes, and should be performed by a qualified electrician. CAUTION Do not connect the inverter and another AC source (such as a generator or utility power) to the AC wiring at the same time. The inverter will be damaged if its output is connected to AC voltage from another source. Damage can even occur if the inverter is switched off. CAUTION Do not connect the inverter to an AC branch circuit that has high-power consumption loads. It will not operate electric heaters, air conditioners, stoves, and other electrical appliances that consume more than 2500 watts. CAUTION Loose connectors result in excessive voltage drop and may cause over heated wires and melted insulation. CAUTION Reverse polarity connections (positive to negative) will blow internal fuses in the inverter and may permanently damage the unit. Such damage is not covered by the warranty. CAUTION We recommend a main fuse in the battery s positive cable to protect against DC wiring short circuits (external to the inverter). The fuse should be as close to the battery as possible. We recommend a Buss Fuse ANL-250 or equivalent. The specific fuse ampere rating should be sized to allow operation of all your DC powered equipment. CAUTION Remove any jewelry (watch, ring, etc.). Be careful not to short circuit the battery with any metallic object (wrench, etc.). WARNING If you are making a permanent AC connection to the inverter, make sure that the AC wiring steps are performed before any DC wiring is done. (DC hook-up energizes internal components, regardless of the position of the On/Off Switch). Working on AC connections in such a circumstance may result in an electric shock. WARNING 115 volt AC power is potentially lethal. Do not work on AC wiring when it is connected to the inverter (even if it is switched off) unless the DC power source is physically disconnected from the inverter. Also, do not work on AC wiring if it is connected to another AC power source such as a generator or the utility line. WARNING You may observe a spark when making the connection because current can flow to charge the capacitors in the inverter. Do not make this connection in the presence of flammable fumes. Explosion or fire may result. Thoroughly ventilate the battery compartment before making this connection
9 Power Consumption Power On and Off Power Consumption For each piece of equipment you will be operating from the inverter, you must determine the battery s reserve capacity (how long the battery can deliver a specific amount of current in automotive batteries, usually 25 ampere) or ampere-hour capacity (a measure of how many amperes a battery can deliver for a specified length of time). Example Reserve capacity: a battery with a reserve capacity of 180 minutes can deliver 25 ampere for 180 minutes before it is completely discharged. Example Ampere-hour capacity: a battery with an ampere-hour capacity of 100 ampere-hours can deliver 5 ampere for 20 hours before it is completely discharged. To determine the battery ampere-hour capacity you require: 1. Determine how many watts each piece of equipment consumes. This can normally be found on the product label. If only the current draw is given, multiply the current draw by 115 to get the watt consumption. 2. Estimate the time (in hours) that each piece of equipment will be running between battery charging cycles. 3. Calculate the total watt-hours of energy consumption (power x operating time) using the average power consumption and the total estimated running time (in hours). Power x Operating Time = Watt-Hours. Laptop 100 watts x 2 hours = 200 watt-hours Blender 300 watts x 15 minutes = 75 watt-hours Turning Your Inverter On or Off Be sure to have your power inverter properly installed before attempting to turn the unit on (see installation page 6). To turn the power inverter on: 1. If a DC power supply Intro is being Operation used as Customer the power source, switch it on. 2. On the Output End, press the Power Button to on. Power Button The inverter is now ready to deliver AC power to your loads. If several loads are to be operated by the inverter, turn them on separately, after the inverter has been turned on. This will ensure that the inverter does not have to deliver the starting currents required for all the loads at once. NOTE The Power Button turns the control circuit in the inverter on and off. It does not disconnect power from the inverter. When the button is in the off position, the inverter draws no current from the battery. When it s in the on position, but no power is being supplied to a load, the inverter draws less than 600 milliamperes from the battery. This is low current draw. It would take more than a week to discharge a 100 ampere-hour battery at this rate depending on the age of the battery. 4. Divide the watt-hours by 10 to determine how many battery (12 volt) ampere-hours will be consumed
10 Operation Remote On/Off Switch Operation Operating Indicators Remote On/Off Switch (not included) An optional Remote On/Off Switch (see page 24 to order accessories) can be connected to the Remote Jack allowing you to turn the Cobra power inverter on or off from a convenient location when the inverter is installed in an out of reach location. Operating Indicators Indicators at the Output End of the unit show the unit s power status and alarms for conditions that could cause it to shut down. Remote Switch Remote Jack Output Watts Over Current Short Circuit Power on The Voltage Input and Power Output indicators automatically toggle between input and output values at three-second intervals. The three LEDs indicate the mode the meter is in and the three digits indicate the voltage or power value. Current Overload Protection If the inverter is overloaded, it will shut down to protect itself. The meter will flash as shown to indicate Overload Protect. To restore normal operation, disconnect the excessive load and turn the unit Off and On again using the Power Button. Short Circuit Protection If the AC output of the inverter is shortcircuited for one second or more, it will shut down to protect itself. The meter will flash as shown to indicate Short Circuit Protect and an alarm will sound. To restore normal operation, disconnect the short circuit and turn the unit Off and On again using the Power Button
11 Operation Operating Indicators Operation Operating Indicators Low Voltage Low Voltage Protection If the DC input voltage drops below the alarm threshold of 11.3V +/- 0.3V the meter will flash as shown to indicate Low Voltage Protection, but the unit will continue to operate. If the input voltage drops to 10.0V or less, the inverter will shut down to protect itself, the meter will continue to flash as shown, and an alarm will sound. To restore normal operation, return the DC input voltage to at least 12V. The inverter will automatically return to normal operation. High Temperature Over Temperature Protection If the internal inverter temperature rises above the alarm threshold, the meter will flash as shown, an alarm will sound to indicate Over Temperature Protect, and the unit will continue to operate. If the internal temperature rises to 40ºC (104ºF), the inverter will shut down to protect itself, the meter will flash as shown and the alarm will continue to sound. High Voltage High Voltage Protection If the DC input voltage rises above 15.0V, the inverter will shut down to protect itself, the meter will flash as shown to indicate Over Voltage Protection, and an alarm will sound. To restore normal operation, return the DC input voltage to less than 15V. The inverter will automatically return to normal operation. NOTE Internal inverter temperature can rise due to being operated in a high heat environment or due to the fan or vents being blocked during operation (even in relatively cool outside air). To restore normal operation, turn the unit Off and allow it to cool. The inverter will automatically return to normal operation after it has cooled
12 Operation Operating Limits Operation Troubleshooting Guide Operating Limits Power Output The inverter can deliver 2500 watts for about 60 minutes. The inverter must cool for 15 minutes before it can resume operation at 2500 watts. Note: The wattage rating applies to resistive loads. The inverter will operate most AC loads within its power rating. Some induction motors used in freezers, pumps, and other motor-operated equipment require very high surge currents to start. The inverter may not be able to start some of these motors even though their rated current draw is within the inverter s limits. The inverter will normally start single phase induction motors rated at one-half HP or less. Input Voltage The inverter will operate from input voltage ranging from 10 volts to 15 volts. Optimum performance will occur when the voltage is between 12 volts and 14 volts. If the voltage drops below 11.3V +/- 0.3V, an audible low battery warning will sound. The inverter will shut down if the input voltage drops below 10.3V +/- 0.3V. This protects the battery from being over-discharged. It will restart when the input voltage exceeds 12V+/-0.3V. The inverter will also shut down if the input voltage exceeds 15.5V+/-0.5V. This protects the inverter against excessive input voltage. Although the inverter has protection against over-voltage, it may still be damaged if the input voltage were to exceed 16 volts. Troubleshooting Guide Problem/Symptom Low output voltage No output voltage No output voltage after prolonged use No output voltage, Protect indicator lighted No output voltage No output voltage Low battery alarm on all the time Possible Causes Overload Low input voltage Thermal shutdown High input voltage Short circuit Inverter switched off No power to inverter Reverse DC polarity Poor DC wiring Poor battery condition Solution Reduce the load. Recharge battery. Check connections and cable. Allow inverter to cool off. Reduce load, continuous operation input current required. Improve ventilation; Make sure ventilation openings in the inverter are not obstructed. Reduce ambient temperature. Make sure the inverter is connected to 12V battery. Check regulation of charging system. Check load for proper operation. Turn inverter on. Check wiring to inverter. Observe correct polarity. Check connections. Make sure battery is fully charged
13 Operation Specifications and Trademark Acknowledgement Specifications Continuous output power (1 hour) W Surge rating (0.1 second) W Peak efficiency (12V 1 2 load)... > 88% Efficiency (full load, 12V)... > 83% No load current draw... < 0.6A (12.6V) Output waveform (resistive load)... Modified sine wave Output frequency... 58HZ 62HZ Output voltage V 120V USB output... 5V Input voltage VDC 14.4VDC Alarm voltage (unload) v 11.6V Shutdown voltage (unload) V 10.6V Operating temperature range... 0 C 40 C (32 F 104 F) Storage temperature range C 85 C (-40 F 185 F) Protection... Overload, short-circuit, overtemp, reverse polarity, under/over voltage. All protection is automatically recovered. To protect the battery, if the unit needs to be restarted after low voltage protection, the voltage of DC input should be above 12V. To extend the life of the fan, it will stop when there is no load. The speed of the fan increases as the load increases. The unit is completely insulated in input and output for added safety. Limited Two-Year For Products Purchased in the U.S.A. Cobra Electronics Corporation warrants that its Cobra power inverter, and the component parts thereof, will be free of defects in workmanship and materials for a period of two years from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A. Cobra will, without charge, repair or replace, at its option, defective power inverters, products or component parts upon delivery to the Cobra Factory Service department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobra s expense, if the product is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. Exclusions: This limited warranty does not apply: 1. To any product damaged by accident. 2. In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. 3. If the serial number has been altered, defaced, or removed. 4. If the owner of the product resides outside the U.S.A. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. Cobra shall not be liable for any incidental, consequential or other damages; including, without limitation, to damages resulting from loss of use or cost of installation. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. For Products Purchased Outside the U.S.A. Please contact your local dealer for warranty information. Trademark Acknowledgement Cobra, Nothing Comes Close to a Cobra and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation is a trademark of Cobra Electronics Corporation, USA. 20 Nothing Comes Close to a Cobra 21
14 Maintenance and Product Service Customer Maintenance Very little maintenance is required to keep the inverter operating properly. The exterior of the unit should be cleaned periodically with a damp cloth to prevent accumulation of dust and dirt. At the same time, tighten the screws on the DC input terminals. Be sure vents and fans are free of dust or debris. Product Service For any questions about operating or installing this new Cobra product, or if parts are missing PLEASE CALL COBRA FIRST do not return this product to the store. See customer assistance on page A1. If your product should require factory service, please call Cobra first before sending your power inverter. This will ensure the fastest turn-around time on your repair. You may be asked to send your power inverter to the Cobra factory. It will be necessary to furnish the following to have the product serviced and returned. 1. For warranty repair include some form of proof-of-purchase, such as a mechanical reproduction or carbon copy of a sales receipt. If you send the original receipt, it cannot be returned. 2. Send the entire product. 3. Enclose a description of what is happening with the power inverter. Include a typed or clearly printed name and address of where the power inverter is to be returned. 4. Pack power inverter securely to prevent damage in transit. If possible, use the original packing material. 5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or Priority Mail to avoid loss in transit to: Cobra Factory Service Cobra Electronics Corporation 6500 West Cortland Street Chicago, Illinois USA. 6. If the power inverter is in warranty, upon receipt of your power inverter, it will either be repaired or exchanged depending on the model. Please allow approximately three to four weeks before contacting Cobra for status. If the power inverter is out of warranty, a letter will automatically be sent informing you of the repair charge or replacement charge. If you have any questions, please call for assistance. Optional Accessories Info Customer Remote On/Off Switch (CPI A20) An optional Remote On/Off Switch can be connected to the Remote Jack allowing you to turn the Cobra CPI2590 inverter on or off from a convenient location when the inverter is installed in an out of reach location. Optional Accessories You can find quality Cobra products and accessories at your local Cobra dealer, or in the U.S.A., you can order directly from Cobra. Ordering from U.S.A. Call for pricing or visit For credit card orders, complete and return this order form to fax number Or call (Press 1 from the main menu) 8:00 a.m. to 5:30 p.m. CT, Monday through Friday. Make check or money order payable to: Cobra Electronics, Attn: Accessories Dept West Cortland Street, Chicago, IL USA To order online, please visit our website:
Introduction Our Thanks to You The Cobra line of quality products includes: Operating Instructions Thank you for purchasing the Cobra CPI 850 inverter. Properly used, this Cobra product will give you many
Operating Instructions for Your Cobra 300 Watt POWER INVERTER M ODEL CPI 300 Nothing comes close to a Cobra 00 300 Watt POWER INVERTER MODEL CPI 300 Congratulations Thank you for purchasing the CPI 300
Operating Instructions for Your Cobra 150 Watt INVERTER M ODEL CPI 150 Nothing comes close to a Cobra 00 Congratulations Thank you for purchasing the CPI 150 Power Inverter from Cobra. When used properly,
Operating Instructions for Your HighGear by Cobra 2000 Watt Power Inverter HG PI2000 How Your HG PI2000 Power Inverter Works How Your Cobra Power Inverter Works The Cobra Power Inverter is an electronic
powerdriveinverters.com Owner s Guide Please Save for Future Reference 300 300 Watt DC to AC Power Inverter Thank you for purchasing the POWERDRIVE300 power inverter, a high performance solution to using
1RECHARGEABLE APPLIANCES 1 CAUTION Certain rechargers for small nickel cadmium batteries can be damaged if connected to the unit. Two types of equipment are particularly prone to this problem: 1. Small
Go Power! Manual GP-1000 Inverter Go Power! Electric Inc. PO Box 6033 Victoria, BC V8P 5L4 Tel: 866-247-6527 Fax: 866-607-6527 Email: firstname.lastname@example.org Table of Contents 1. INTRODUCTION 3 2. SPECIFICATIONS
Go Power! Manual GP-1750HD Inverter GP-2500 Inverter Go Power! Electric Inc. PO Box 6033 Victoria, BC V8P 5L4 Tel: 866-247-6527 Fax: 866-607-6527 Email: email@example.com Table of Contents 1. INTRODUCTION...
Pure Sine Wave Inverter GP-HS1500 Owner s Manual 2 Table of Contents Introduction 3 Specifications 4 Name and Main Function 5 Installation 7 Operation 9 Operating Limits 13 Troubleshooting 13 Maintenance
1500 Watt DC to AC Power Inverter C o n v e r t s 1 2 V D C B a t t e r y P o w e r t o 1 1 0 V A C H o m e P o w e r O W N E R ' S M A N U A L SAVE THESE INSTRUCTIONS The recommended source of power is
S150,S300 Series Pure Sine Wave Inverter User s Manual List of contents 1. Important Safety Instructions 3 1-1 General Safety Precautions 3 1-2 Precautions When Working With Batteries.. 3 2. Features...
CHEROKEE TITANIUM SERIES DC To AC POWER INVERTER USERS MANUAL MODEL P1-1000 Cherokee Power Inverters a Division of The Wireless Marketing Corporation 1212 Remington Rd. Schaumburg, IL. USA, 60173 HOW TO
3000W POWER INVERTER User Manual Posts AC outlets Digital display ON/OFF button Remote control connection port (remote control switch is not included) USB port Two set of heavy duty input cable P a g e
Owner s Manual PowerVerterDC-to-AC Inverter Model: PV700HF Input V DC Output 0V, 60Hz AC Reliable AC Power Wherever You Need It Congratulations! You've purchased a high-quality Inverter designed to function
GSL Electronics Modified Sine Wave Power Inverters Congratulations on choosing one of our Modified Sine Wave Inverters for your application. There are 6 models in the range, which will meet most of your
R Item no. 2402 Smart AC 200 USB User s Manual Smart AC 200 Watt with USB by Wagan Tech User s Manual Read before using this equipment Thank you for purchasing Smart AC 200 Watt with USB by Wagan Tech.
OWNER S MANUAL DP AUDIO Model No. DN350 12 Volt DC to 115 Volt AC 150 WATT 300WATT HIGH SURGE POWER INVERTER Please read installation and operation instruction before using this Power inverter. Contents
OWNERS MANUAL Model: PIF-2000 Power Inverter Converts 12V DC Battery Power to AC Household Power PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the converter
ATD-5955 2000 WATT INVERTER Welcome. This ATD product has been carefully engineered and manufactured to give you dependable operation. Please read this manual thoroughly before operating your new ATD product,
WARNING: This Unit employs Components that tend to produce arcs or sparks To prevent fire or explosion, do not install in compartments containing batteries or flammable materials - SHOCK HAZARD. DO NOT
ATD-5954 1500 WATT INVERTER Welcome. This ATD product has been carefully engineered and manufactured to give you dependable operation. Please read this manual thoroughly before operating your new ATD product,
12VDC TO 230VAC INVERTERS 12VDC TO 230VAC INVERTERS MODEL Nos: CI-200 CI-400 CI-600 CI-800 CI-1000 CI-1500 OPERATION & MAINTENANCE INSTRUCTIONS 0706 Thank you for purchasing this CLARKE Power Inverter.
Version 1.1 Version 2 Nature Power Inverters True Sinewave Inverter Modified Sinewave Inverter Owner s Manual!!!!!!!!!!! 38304 38204 For safe and optimum performance, the Power Inverter must be used properly.
PI1500X Power Inverter User s Manual featuring WARNING Failure to follow instructions may cause damage or explosion, always shield eyes. Read entire instruction manual before use. Warning: This product
VEC1043_ManualEN_091505 1/17/06 5:49 PM Page 8 Fault Protection Code and Troubleshooting Guide INVERTER POWER SWITCH TURNED ON VEC1043 Trouble/Indication Possible Cause Suggested Remedy No AC output yellow
DC TO AC POWER INVERTER 12V / 24V / 48Vdc Input 115V / 230Vac Output 150W ~ 6000W Output cont. L-Series User Manual Before install and use your Inverter, read the User Manual and safety instructions. Cooler
DC TO AC PURE SINE POWER INVERTER PWRI18012S INSTRUCTION MANUAL 1 A. INTRODUCTION The AIMS Power pure sine inverter product line is used for back-up power. The pure sine product line is ideal for sensitive
Owner's Manual DC-AC Power Inverter Models: 006180-0 (750W) 006179-0 (400W) 006178-0 (200W) 200W Model 400W/750W Models Power inverter produces powerful voltage that can cause death or great physical harm.
AUTOMOTIVE POWER INVERTERS INSTRUCTIONS Item #31463, #31464, #31465 EASTWOOD AUTOMOTIVE POWER INVERTERS are heavy-duty professional grade pieces of equipment designed to bring 120 volt power to any automobile.
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S QPET, QPETXU Battery Chargers INTRODUCTION: The QPET line of chargers are designed for general purpose deep cycle batteries. They are an electronically
1000-Watt Energy Center OPERATING INSTRUCTIONS Patent Pending Sierra Wave 1000-Watt Energy Center #9675 The Sierra Wave 1000-Watt Energy Center is a heavy duty and efficient portable power center offering
Operating Instructions PRO- If you sell, inventory or service lead-acid batteries, you want the battery you take off the shelf to be as new as the day it was manufactured. However, batteries that sit idle
Battery Power Inverters Renogy 500W 1000W 2000W Pure Sine Wave Inverter Manual 2775 E. Philadelphia St., Ontario, CA 91761 1-800-330-8678 1 Version 1.4 Important Safety Instructions Please save these instructions.
XPower Inverter 1000 Plus and 1750 Plus Owner s Guide About Xantrex Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with products from 50 watt mobile units
AC POWER SOURCE PURE SINE WAVE DC-AC INVERTERS MODEL: PST-15S-12A OWNER S MANUAL Please read this manual before operating your inverter. INDEX Contents General Safety & Installation... 3 Warning... 4 Description
OWNERS MANUAL Models: SP3, SPSS3 Automatic Battery Charger PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the charger safely and effectively. Please read and
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S OBE, OBEXU, ON BOARD Battery Chargers INTRODUCTION: These chargers are designed for the permanent installation on battery powered vehicles
OPERATOR S MANUAL Portable Power 950 Model No. 28.71987 Read and follow all Safety Rules and Operating Instructions before Every Use of this Product. Save these instructions. Sears Brands Management Corporation,
Audi R8 Ride-on Car 5F62630 OWNER S MANUAL Keep instructions for future reference 1 Safety The owner s manual contains assembly, use and maintenance instructions. The vehicle must be assembled by an adult
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S OBAE, OBAEXU, ON BOARD Battery Chargers INTRODUCTION: The OBAE line of chargers are designed for the permanent installation on battery powered
48-3000RM 2U 19, 2 Post Rack Mount & 4 Post Open Frame Cabinet Mount Pure Sine Wave Inverter User Manual Newmar PO Box 1306 Newport Beach, CA 92663 www.poweringthenetwork.com Tel: 714-751-0488 M-483000RM
V1.1 Nature Power Inverters Modified Sinewave 1000w/1500w True Sinewave 1000w/2000w Owner s Manual Modified Sinewave Series True Sinewave Series For safe and optimum performance, the Power Inverter must
item #2204 User s Manual SHEMO080100244TXC Introduction Thank you for purchasing this Wagan Pure Sine Wave DC to AC Power Inverter. It delivers a true sine wave AC identical to that of commercial power.
You re never left in the dark. Handcrank Power Supply Always prepared for any outage Merrimack, New Hampshire USA 03054 800-846-3000 Brookstone.com Table of contents Warnings and Cautions....................................................
WJS-3500 User Guide MIGHTY JUMP STARTER Portable Jump Start & Power Supply Welcome Thank you for choosing a Whistler product. We are dedicated to providing products that represent both quality and value.
Item No. : 2467 300 Amp Battery Jumper User s Manual We are constantly improving our products so specifications are subject to change without notice. Visit our website for the latest product information.
POWER INVERTERS User s Manual Includes information on SOLAR Model PI30000X WARNING Failure to follow instructions may cause damage or explosion, always shield eyes. Read entire instruction manual before
WJS-1800 User Guide MINI JUMP STARTER Portable Jump Start & Power Supply 2 PRODUCT LAYOUT Welcome Thank you for choosing a Whistler product. We are dedicated to providing products that represent both quality
Operating Instructions & Parts Manual EN 800 Watt Power Inverter Model 54DC44A PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT
PROwatt 1750 Inverter Owner s Guide About Xantrex Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with products from 50 watt mobile units to 1 MW utility-scale
S600,S600R Series Pure Sine Wave Inverter User s Manual Table of contents 1. Important Safety Information. 1 1-1 General Safety Precautions 1 1-2 Batteries Precautions.. 1 2. Features... 2 2-1 Applications..
Power your day-to-day when others are power-less. Humless Sentinel User s Guide www. User s Guide Contents Safety Instructions page 6 Meet The Power page 7 Charging Your Unit page 12 Powering Your Devices
RIGrunner for models 4004USB 4005 / 4005H 4008 / 4008H 4012 www.westmountainradio.com 1020 Spring City Drive Waukesha, WI 53186 262-522-6503 firstname.lastname@example.org 2015 West Mountain Radio, All rights
Cordless Make Up Mirror WITH ILLUMINATED 1X AND 10X MAGNIFICATION PLUS NIGHT LIGHT TABLE OF CONTENTS Warnings and Cautions....1 Location of Parts and Controls....6 Installing the Batteries...8 Using the
FEATURES Charges two 6- to 8-cell NiCd/NiMH battery packs simultaneously Fully automatic operation Multi-color LEDs indicate state of charge at a glance 8-bit MHz CPU intelligence control Advanced Pulse
Power Bank Elite Series Owner s Manual Product Description Congratulations on purchasing your Nature Power Power Bank Elite. You can now charge all you digital devices easier than ever and also power your
POWER INVERTER 700 WATT / 1800 WATT PEAK 91848 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
Modified Sine Wave Inverter USER MANUAL DC-AC Power Inverter Special Feature: Fuse: Built-out USB:5V,500mA Modified sine wave output High reliability and high efficiency High load ability Temperature and
Owner s Manual Model Nos. 2001/3001 Commercial Jump Starter/Chargers WARNING READ ENTIRE MANUAL CAREFULLY BEFORE OPERATING UNIT! Made in U.S.A. Clore Automotive Kansas City, MO 64161 www.solaronline.com
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
INSTRUCTION MANUAL FILE: 091-165-12 reve Rev: E, page 8 DATE: 7-02-15 AUTO CHARGE 12 AUTOMATIC BATTERY CHARGER MODEL #091-165-12 NOTE : This charger is designed for vehicles with a single battery and negative
DTXP4195 AC/DC LIPO CHARGER INSTRUCTION MANUAL The Onyx 150 AC/DC LiPo balancing charger is the perfect entry-level LiPo charger for modelers using up to 3S LiPo batteries. Inexpensive and very easy to
INSTRUCTION MANUAL AUTO CHARGE D PUMP PLUS AUTOMATIC DUAL OUTPUT BATTERY CHARGER Designed Specifically for Vehicles with DDEC ENGINES MODEL #: 091-9-DPP INPUT: 120 Volt, 60 Hz, 8 Amps OUTPUT VEHICLE BATTERY:
Model 1672, 1673 Triple Output Power Supply INSTRUCTION MANUAL 1 Safety Summary The following safety precautions apply to both operating and maintenance personnel and must be observed during all phases
OWNER'S MANUAL DieHard. BATTERY CHARGER/MAINTAINER 1.5 Amp Fully Automatic Float-Mode Monitoring Model No. 200.71220 CAUTION: Read and follow all Safety Rules and Operating Instructions Before Every Use
MODEL # 2032 BOOST 200 6- In- 1 POWER SUPPLY with 200 WATT INVERTER 200W Power Inverter BOOST 200 6-in-1 POWER SUPPLY with 200W inverter Double Injection Rubberized handle 260 PSI Air Pressure Gauge Main
SAFETY WARNINGS AND GUIDELINES Place the inverter in a well-ventilated environment. Ensure that the cooling fan is not blocked and that it operates as intended. Do not use the inverter if the fan fails