The next generation of controllers and valves

Transcription

1 The next generation of controllers and valves

2 Vexve - The next generation of controllers and valves When you want to ensure the heating in your home is energy-efficient, it is crucial to find the right equipment and components. Ecological aspects and energy-efficient heating methods provide a basis for the selection of your heating solution. Vexve s new generation controllers and valves have been developed to control water-based heating systems and optimise energy storage in different heating systems. Vexve AM controller series Our completely redesigned controller models keep the room air temperature constantly warm regardless of the temperature outside. The advanced technique and regulator automatics of our control devices ensure accurate and efficient operation in demanding weather conditions. When necessary, you can also program different daily and weekly heating programmes. Vexve AMV 3 valve series and Vexve AMV 4 valve series Our distribution and mixing valves control both supply and return water. Vexve AM valves are the perfect complement for the Vexve AM controllers for maximum regulation accuracy. Vexve valves are known for their reliability, which makes them the preferred choice for professionals. Energy-efficiency and more comfortable living conditions Thanks to its over 50-year experience, Vexve Oy is a leading controller and valve manufacturer. Our products are user-friendly and easy to both install and use. Distributed through HPAC trade counters, our products have been well-known to HPAC professionals for decades. 2

3 Completely redesigned Vexve AM controller series The Vexve AM heating controller series includes the new advanced models AM20W and AM40. Vexve AM20W is a wireless heating controller that regulates radiatoror under floor heating systems depending on the room temperature. The intuitive wireless room unit is simple to use, and the temperature can be lowered for the duration of the working day at the press of a single button. Vexve AM40 is a heating controller for the regulation of two heating circuits and it can be set to operate according to the indoor or outdoor temperature. The model s room units are wireless and boast several default programs for, e.g. the control of the charging pump. The versatile Vexve AM40 is easy to install and use. You can find more accurate information about the products on the following pages. New generation Vexve AMV 3 and 4-way valve series Vexve AMV3 and AMV4 distribution and mixing valves are intended to regulate heat transfer pipe systems. The new maintenancefree valves are more efficient and easier than ever to install. Their technical properties meet the strictest of quality requirements regarding e.g. tightness. You can find more accurate information about these products on page 9 3

4 4

5 Vexve AM20W 76,00 Indoor temperature-based controller for one circuit Product no A single-family house controller operated with a wireless room unit Suitable for the regulation of both radiator- and under floor heating systems Due to patented indoor temperature-based controls, no need to set separate settings The ECO function allows easy energy-savings at the press of a single button Easy temperature regulation with an adjustment wheel (in Celsius) Clear illuminated graphic LCD display Simple installation without special tools 139,50 INCLUDES: External power supply Supply water temperature sensor Heating control unit, including a three-way valve control unit RF antenna unit Wireless room unit Scale 1:1 Power supply Heating control unit RF antenna unit Supply water temperature sensor Wireless room unit 5

6 6

7 Vexve AM40 Adaptable heating controller Product no Regulator for the control of one or two heating circuits With outdoor or indoor temperature-based control Wireless room units equipped with the Eko function for easy energy-savings at the press of a single button Suitable for the regulation of both radiator- and under floor heating systems Easy to install, e.g. a panel installation option Very simple to use thanks to a clear graphic LCD display Incl. standard firmware e.g. for Bio Energy and Solar Energy Easy to extend with an accessory package INCLUDES: Heating controller Valve motor with a 1.5-metre cable Power supply Outdoor sensor, 15 metres Supply water temperature sensor, 3.0 metres Installation kit ACCESSORIES: Wireless room unit Valve motor for a second heating circuit Extension package for relay and temperature connections Wireless room unit Wireless room unit Outdoor sensor RF antenna unit Power supply Valve motor Heating controller Valve motor Extension package GSM Supply water temperature sensor 7

8 Vexve AMV 3 and 4-way valve series Vexve AMV distribution and mixing valves are highly reliable and provide excellent regulating properties. The AMV mixing valves are suitable for motorisation due to their low torque requirement. The valves are made of dezincification-resistant brass. The valves are shipped as right-handed versions but can be easily converted for left-handed installation without special tools. 8

9 Vexve AMV3-series B C D A E F 3- way brass valve, thread-thread Product No. Item DN kv A B mm C mm D mm E mm F mm Weight kg AMV ,6 Rp 1/2" AMV ,0 Rp 1/2" AMV ,6 Rp 1/2" AMV ,5 Rp 1/2" , AMV ,0 Rp 3/4" AMV ,3 Rp 3/4" , AMV ,0 Rp 1" AMV Rp 1" , AMV Rp 1 1/4" , ,95 Vexve AMV4-series B C B A D E 4- way brass valve, thread-thread Product No. Item DN kv A B mm C mm D mm E mm Weight kg AMV ,5 Rp 1/2" , AMV ,0 Rp 3/4" AMV ,3 Rp 3/ 4" , AMV ,0 Rp 1" AMV Rp 1" , AMV Rp 1 1/4" ,1 For more info see 9

10 Vexve TERMOVAR and ACGE charging groups for larger and smaller heat sources Termovar ensures efficient charging by combining a wood burner and a thermal storage system. ACGE is suitable for connecting heat sources of less than 45 kw to thermal storage systems. 10

11 TERMOVAR charging package (30-65 kw) Product no ACGE electrical charging unit (10-45 kw) Product no The Termovar package is a comprehensive, factoryassembled charging package for the connection of wood burners and thermal storage systems. The package achieves a high operating temperature in the boiler while the storage system is being charged. The use of the charging package lengthens the lifetime of the boiler, helps to avoid incorrect connections and shortens the installation time, thus producing savings. The charging package transfers heat from a wood burner into a thermal storage unit. The package includes a pump, R 1 1/4 ball valves, thermometers, a 72ºC thermostat, an alternative 80ºC thermostat and an unloader valve. The package also includes a thermal insulation casing and a flue gas thermostat. The charging unit can be installed in a small space, e.g. the heat storage unit of a fireplace. Tmax = 110ºC, Pmax = 10 bar The Automix CTS thermal regulator maintains the desired return temperature. The charging temperature adjustment range is 30 C to 80 C. Circulation water pump, max l/hr, with three speed settings Distribution valve with an integrated backflow function R 1 fittings with integrated closing ball valves The charging group is also available as a thermostat-controlled basic model. 11

12 Pajakatu 11 FI Sastamala Finland Tel Fax Vexve can accept no responsibility for possible errors in catalogues, brochures and other printed material. All trademarks in this material are property of the respective companies. All rights reserved. 04/2011