150 C. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

Size: px
Start display at page:

Download "150 C. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder."

Transcription

1 T498 Automotive Grade MnO C Overview The KEMET T498 Series is a high temperature product that offers optimum performance characteristics in applications with operating temperatures up to 150 C. Advanced materials and testing allow this series to perform with a reliability level of 0.5%/1,000 hours at rated voltage and temperature. This series is classified as MSL (Moisture Sensitivity Level) 1 under J STD 020: unlimited floor life time at 30 C/85% RH. The T498 Series is available in five standard EIA case sizes with RoHS compliant terminations as standard. Benefits Meets or exceeds EIA standard 535BAAC Taped and reeled per EIA 481 Symmetrical, compliant terminations Optional gold-plated terminations Laser-marked case 100% surge current testing Complies with AEC Q200 Capacitance values of 0.47 to 220 μf Tolerances of ±10% and ±20% rating of 4 50 VDC 100% steady-state accelerated aging erature/voltage derating is 2/3 at 150 C RoHS Compliant and lead-free terminations standard Operating temperature range of 55 C to +150 C Applications Typical applications include decoupling and filtering in industrial and automotive end applications such as DC/DC converters, portable electronics, telecommunications, and control units operating at temperatures up to 150 C. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 1

2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET's K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 498 X 227 M 010 A T E500 Capacitor Class T = Tantalum Series High erature 150 C Size A B C D X Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros. Capacitance Tolerance K = ±10% M = ±20% (VDC) 004 = = = = = = = = 50 Failure Rate/ Design A = N/A Termination Finish T = 100% Matte Tin (Sn) plated* G = Gold plated H = Standard solder coated (SnPb 5% Pb minimum) E = Last three digits specify in mω (500 = 500 mω) Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel Performance Characteristics Item Operating erature 55 C to 150 C Performance Characteristics Capacitance Range μf at 120 Hz/25 C Capacitance Tolerance K Tolerance (10%), M Tolerance (20%) Range (120 Hz) (100 ) Leakage Current 4 50 V Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table 0.01 CV (µa) at rated voltage after 5 minutes KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 2

3 Qualification *IL = Initial Limit Test Condition Characteristics Endurance Storage Life Thermal Shock erature Stability Surge Mechanical Shock/ Vibration 150 C at 2/3 rated voltage, 2,000 hours 150 C at 0 volts, 2,000 hours MIL STD 202, Method 107, Condition B, mounted, 55 C to 150 C, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25ºC, 55ºC, +25ºC, +85ºC, +150ºC, +25ºC 85 C, 1.32 x rated voltage 1,000 cycles (150 C, 1.2 x rated voltage) MIL STD 202, Method 213, Condition I, 100 G peak MIL STD 202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Δ C/C DCL Δ C/C DCL Δ C/C DCL Within ±10% of initial value Within 1.25 x initial limit Within ±10% of initial value Within 1.25 x initial limit Within ±5% of initial value Within 1.25 x initial limit +25 C 55 C +85 C +150 C Δ C/C IL* ±10% ±10% ±20% IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL Δ C/C DCL Δ C/C DCL Within ±5% of initial value Within ±10% of initial value Certification KEMET s Internal Qualification Plan for this Tantalum series of capacitors follows AEC Q200 guidelines. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 3

4 Electrical Characteristics vs. Frequency Capacitance vs. Frequency 1,000 1,000 Impedance, (Ohms) T498B106M010ATE1K8_IMP T498D476M010ATE600_IMP T498B106M010ATE1K8_ T498X227M010ATE500_IMP T498D476M010ATE600_ T498X227M010ATE500_ Capacitance (µf) T498B106M010ATE1K8 T498D476M010ATE600 T498X227M010ATE ,000 10, ,000 1,000,000 10,000,000 Frequency (Hz) ,000 10, ,000 1,000,000 10,000,000 Frequency (Hz) Dimensions Millimeters (Inches) Metric will govern CATHODE (-) END VIEW W SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B B H E F X T S G S Termination cutout at KEMET's option, either end R P L Size Component KEMET EIA L W H F ±0.1 ±(0.004) S ±0.3 ±(0.012) B ±0.15 (Ref) ±0.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A ± ± ±0.2 (0.126±0.008) (0.063±0.008) (0.063±0.008) B ± ± ±0.2 (0.138±0.008) (0.110±0.008) (0.075±0.008) C ± ± ±0.3 (0.236±0.012) (0.126±0.012) (0.098±0.012) D ± ± ±0.3 (0.287±0.012) (0.169±0.012) (0.110±0.012) X ± ± ±0.3 (0.287±0.012) (0.169 ±0.012) (0.157±0.012) Notes: (Ref) Dimensions provided for reference only. 1.2 (0.047) 2.2 (0.087) 2.2 (0.087) 2.4 (0.094) 2.4 (0.094) 0.8 (0.031) 0.8 (0.031) 1.3 (0.051) 1.3 (0.051) 1.3 (0.051) 0.4 (0.016) 0.4 (0.016) 0.5 (0.020) 0.5 (0.020) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 0.10±0.10 (0.004±0.004) 0.10±0.10 (0.004±0.004) 0.10±0.10 (0.004±0.004) 0.10±0.10 (0.004±0.004) 0.4 (0.016) 0.5 (0.020) 0.9 (0.035) 0.9 (0.035) 1.7 (0.067) 0.4 (0.016) 1.0 (0.039) 1.0 (0.039) 1.0 (0.039) 1.0 (0.039) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) 1.2 (0.047) 1.9 (0.075) 3.1 (0.122) 3.8 (0.150) 3.8 (0.150) 1.1 (0.043) 1.8 (0.071) 2.8 (0.110) 3.5 (0.138) 3.5 (0.138) 1.3 (0.051) 2.2 (0.087) 2.4 (0.094) 3.5 (0.138) 3.5 (0.138) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 4

5 Table 1 Ratings & Part Number Reference Cap Code/ Size VDC at 85 C µf KEMET/EIA KEMET Part Number (See below for part options) DC Leakage µa at +20 C /5 Min (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including may be substituted within the same size at KEMET's option. substitution will be marked with the higher voltage rating. Substitutions can include better than series. % at +20 C 120 Hz mω at 20 C 100 imum Allowable Ripple Current +25 C C C 100 imum Operating A/ T498A685(1)004A(2)E3K A/ T498A106(1)004A(2)E2K B/ T498B106(1)004A(2)E2K A/ T498A156(1)004A(2)E2K B/ T498B156(1)004A(2)E2K B/ T498B226(1)004A(2)E1K C/ T498C226(1)004A(2)E1K B/ T498B336(1)004A(2)E1K C/ T498C336(1)004A(2)E1K C/ T498C476(1)004A(2)E1K C/ T498C686(1)004A(2)E D/ T498D686(1)004A(2)E D/ T498D107(1)004A(2)E D/ T498D157(1)004A(2)E A/ T498A225(1)006A(2)E6K A/ T498A335(1)006A(2)E4K A/ T498A475(1)006A(2)E3K A/ T498A685(1)006A(2)E2K B/ T498B685(1)006A(2)E2K A/ T498A106(1)006A(2)E2K B/ T498B106(1)006A(2)E2K B/ T498B156(1)006A(2)E1K C/ T498C156(1)006A(2)E1K B/ T498B226(1)006A(2)E1K C/ T498C226(1)006A(2)E1K B/ T498B336(1)006A(2)E1K C/ T498C336(1)006A(2)E1K C/ T498C476(1)006A(2)E D/ T498D476(1)006A(2)E C/ T498C686(1)006A(2)E D/ T498D686(1)006A(2)E D/ T498D107(1)006A(2)E D/ T498D157(1)006A(2)E A/ T498A155(1)010A(2)E6K A/ T498A225(1)010A(2)E4K A/ T498A335(1)010A(2)E3K A/ T498A475(1)010A(2)E2K B/ T498B475(1)010A(2)E2K A/ T498A685(1)010A(2)E2K B/ T498B685(1)010A(2)E2K B/ T498B685(1)010A(2)E1K A/ T498A106(1)010A(2)E3K B/ T498B106(1)010A(2)E1K B/ T498B106(1)010A(2)E1K C/ T498C106(1)010A(2)E1K VDC at 85 C µf KEMET/EIA Cap Code/ Size (See below for part options) KEMET Part Number µa at +20 C /5 Min DC Leakage % at +20 C 120 Hz mω at 20 C C C 100 imum Allowable Ripple Current +125 C 100 C C imum Operating MSL Reflow 260 C Reflow 260 C MSL KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 5

6 Table 1 Ratings & Part Number Reference cont'd Cap Code/ Size VDC at 85 C µf KEMET/EIA KEMET Part Number (See below for part options) DC Leakage µa at +20 C /5 Min % at +20 C 120 Hz mω at 20 C 100 imum Allowable Ripple Current +25 C C C 100 imum Operating B/ T498B156(1)010A(2)E1K B/ T498B156(1)010A(2)E C/ T498C156(1)010A(2)E1K B/ T498B226(1)010A(2)E1K C/ T498C226(1)010A(2)E1K C/ T498C336(1)010A(2)E D/ T498D336(1)010A(2)E C/ T498C476(1)010A(2)E C/ T498C476(1)010A(2)E D/ T498D476(1)010A(2)E D/ T498D686(1)010A(2)E D/ T498D107(1)010A(2)E X/ T498X157(1)010A(2)E X/ T498X227(1)010A(2)E A/ T498A105(1)016A(2)E6K A/ T498A155(1)016A(2)E5K A/ T498A225(1)016A(2)E4K A/ T498A335(1)016A(2)E3K B/ T498B335(1)016A(2)E3K A/ T498A475(1)016A(2)E3K B/ T498B475(1)016A(2)E2K B/ T498B475(1)016A(2)E1K A/ T498A685(1)016A(2)E2K A/ T498A685(1)016A(2)E2K B/ T498B685(1)016A(2)E1K C/ T498C685(1)016A(2)E1K B/ T498B106(1)016A(2)E2K B/ T498B106(1)016A(2)E1K C/ T498C106(1)016A(2)E1K C/ T498C106(1)016A(2)E C/ T498C156(1)016A(2)E1K C/ T498C226(1)016A(2)E1K C/ T498C226(1)016A(2)E D/ T498D226(1)016A(2)E C/ T498C336(1)016A(2)E D/ T498D336(1)016A(2)E D/ T498D336(1)016A(2)E C/ T498C476(1)016A(2)E C/ T498C476(1)016A(2)E D/ T498D476(1)016A(2)E D/ T498D476(1)016A(2)E D/ T498D686(1)016A(2)E X/ T498X107(1)016A(2)E A/ T498A684(1)020A(2)E7K A/ T498A105(1)020A(2)E5K VDC at 85 C µf KEMET/EIA Cap Code/ Size (See below for part options) KEMET Part Number µa at +20 C /5 Min DC Leakage % at +20 C 120 Hz mω at 20 C C C 100 imum Allowable Ripple Current +125 C 100 C C imum Operating MSL Reflow 260 C Reflow 260 C MSL (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including may be substituted within the same size at KEMET's option. substitution will be marked with the higher voltage rating. Substitutions can include better than series. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 6

7 Table 1 Ratings & Part Number Reference cont'd Cap Code/ Size VDC at 85 C µf KEMET/EIA KEMET Part Number (See below for part options) DC Leakage µa at +20 C /5 Min (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including may be substituted within the same size at KEMET's option. substitution will be marked with the higher voltage rating. Substitutions can include better than series. % at +20 C 120 Hz mω at 20 C 100 imum Allowable Ripple Current +25 C C C 100 imum Operating A/ T498A155(1)020A(2)E5K B/ T498B225(1)020A(2)E3K B/ T498B335(1)020A(2)E2K B/ T498B475(1)020A(2)E1K C/ T498C475(1)020A(2)E1K C/ T498C685(1)020A(2)E1K C/ T498C685(1)020A(2)E C/ T498C106(1)020A(2)E1K C/ T498C156(1)020A(2)E1K D/ T498D156(1)020A(2)E D/ T498D226(1)020A(2)E D/ T498D336(1)020A(2)E D/ T498D336(1)020A(2)E A/ T498A474(1)025A(2)E8K A/ T498A684(1)025A(2)E6K A/ T498A105(1)025A(2)E5K B/ T498B155(1)025A(2)E4K B/ T498B225(1)025A(2)E3K C/ T498C335(1)025A(2)E2K C/ T498C475(1)025A(2)E1K C/ T498C685(1)025A(2)E1K D/ T498D685(1)025A(2)E1K C/ T498C106(1)025A(2)E C/ T498C106(1)025A(2)E1K C/ T498C106(1)025A(2)E1K D/ T498D106(1)025A(2)E1K D/ T498D156(1)025A(2)E D/ T498D226(1)025A(2)E D/ T498D336(1)025A(2)E A/ T498A104(1)035A(2)E28K A/ T498A154(1)035A(2)E23K A/ T498A224(1)035A(2)E15K A/ T498A334(1)035A(2)E11K A/ T498A474(1)035A(2)E10K B/ T498B474(1)035A(2)E8K B/ T498B684(1)035A(2)E5K A/ T498A105(1)035A(2)E10K B/ T498B105(1)035A(2)E4K C/ T498C155(1)035A(2)E3K C/ T498C225(1)035A(2)E2K C/ T498C335(1)035A(2)E1K C/ T498C475(1)035A(2)E1K D/ T498D475(1)035A(2)E1K D/ T498D685(1)035A(2)E D/ T498D106(1)035A(2)E D/ T498D106(1)035A(2)E VDC at 85 C µf KEMET/EIA Cap Code/ Size (See below for part options) KEMET Part Number µa at +20 C /5 Min DC Leakage % at +20 C 120 Hz mω at 20 C C C 100 imum Allowable Ripple Current +125 C 100 C C imum Operating MSL Reflow 260 C Reflow 260 C MSL KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 7

8 Table 1 Ratings & Part Number Reference cont'd Cap Code/ Size VDC at 85 C µf KEMET/EIA KEMET Part Number (See below for part options) DC Leakage µa at +20 C /5 Min (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including may be substituted within the same size at KEMET's option. substitution will be marked with the higher voltage rating. Substitutions can include better than series. % at +20 C 120 Hz mω at 20 C 100 imum Allowable Ripple Current +25 C C C 100 imum Operating D/ T498D156(1)035A(2)E X/ T498X156(1)035A(2)E D/ T498D226(1)035A(2)E X/ T498X226(1)035A(2)E X/ T498X226(1)035A(2)E X/ T498X336(1)035A(2)E X/ T498X476(1)035A(2)E X/ T498X476(1)035A(2)E A/ T498A104(1)050A(2)E27K B/ T498B154(1)050A(2)E22K B/ T498B224(1)050A(2)E15K B/ T498B334(1)050A(2)E11K C/ T498C474(1)050A(2)E6K C/ T498C684(1)050A(2)E5K C/ T498C105(1)050A(2)E3K D/ T498D155(1)050A(2)E2K D/ T498D225(1)050A(2)E2K D/ T498D335(1)050A(2)E1K D/ T498D475(1)050A(2)E D/ T498D475(1)050A(2)E D/ T498D685(1)050A(2)E X/ T498X685(1)050A(2)E D/ T498D106(1)050A(2)E1K X/ T498X106(1)050A(2)E X/ T498X106(1)050A(2)E1K VDC at 85 C µf KEMET/EIA Cap Code/ Size (See below for part options) KEMET Part Number µa at +20 C /5 Min DC Leakage % at +20 C 120 Hz mω at 20 C C C 100 imum Allowable Ripple Current +125 C 100 C C imum Operating MSL Reflow 260 C Reflow 260 C MSL KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 8

9 Recommended Derating Guidelines Working Recommended Application (for maximum reliability) 85 C 150 C 85 C 150 C % Working % Change in Working DC with erature Recommended imum Application (As % of ) erature (ºC) 67% 33% Ripple Current/Ripple Permissible AC ripple voltage and current are related to equivalent series resistance () and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. erature Compensation Multipliers for imum Ripple Current T 25 C T 85 C T 125 C T 150 C T= Environmental erature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the erature Compensation Multiplier table for details. KEMET Series and Code EIA Code imum Power Dissipation (P max) mwatts at 25 C with +20 C Rise A B C D X E S T U V T510X T510E Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/r E(max) = Z P max/r I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = at specified frequency (ohms) Z = Impedance at specified frequency (ohms) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/2017 9

10 Reverse Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. erature Permissible Transient Reverse 25 C 15% of 85 C 5% of 125 C 1% of Table 2 Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: imum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A B C D X Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC 7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

11 Soldering Process KEMET s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J STD 020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/ case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Profile Feature Preheat/Soak SnPb Assembly Pb-Free Assembly erature Minimum (T Smin ) 100 C 150 C erature imum (T Smax ) 150 C 200 C Time (t s ) from T smin to T smax ) seconds seconds Ramp-up Rate (T L to T P ) 3 C/seconds maximum 3 C/seconds maximum Liquidous erature (T L ) 183 C 217 C Time Above Liquidous (t L ) seconds seconds Peak erature (T P ) 220 C* 250 C* 235 C** 260 C** Time within 5 C of imum Peak erature (t P ) 20 seconds maximum 30 seconds maximum Ramp-down Rate (T P to T L ) 6 C/seconds maximum 6 C/seconds maximum Time 25 C to Peak erature 6 minutes maximum 8 minutes maximum Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. Wiping the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * Size D, E, P, Y, and X ** Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z erature T P T L T smax T smin 25 imum Ramp-up rate = 3 C/second imum Ramp-down rate = 6 C/second t s 25 C to Peak Time t L t P Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. erature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

12 Construction Molded Epoxy Polarity Stripe (+) Polarity Bevel (+) Detailed Cross Section Silver Paint (Fourth Layer) Tantalum Wire Leadframe ( Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Washer Silver Adhesive Molded Epoxy Leadframe (+ Anode) MnO 2 (Second Layer) Ta 2 O 5 Dielectric (First Layer) Tantalum Capacitor Marking Polarity Indicator (+) Picofarad Code KEMET ID & High erature 150 C Date Code* Date Code * 1 st digit = Last number of Year 2 = = = = = = nd and 3 rd digit = Week of the Year 01 = 1 st week of the Year to 52 = 52 nd week of the Year * 230 = 30 th week of 2012 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

13 Tape & Reel Packaging Information KEMET s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Top Tape Thickness 0.10 mm (0.004") imum Thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0") Table 3 Packaging Quantity Code Tape Width (mm) 7" Reel* 13" Reel* KEMET EIA S ,500 10,000 T ,500 10,000 M ,000 8,000 U ,000 5,000 L ,000 3,000 W ,000 3,000 Z ,000 3,000 V ,000 3,000 A ,000 9,000 B ,000 8,000 C ,000 D ,500 Q ,000 3,000 Y ,000 X ,000 E/T428P ,000 H ,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

14 Figure 1 Embossed (Plastic) Carrier Tape Dimensions T T 2 ØDo P 2 Po [10 pitches cumulative tolerance on tape ± 0.2 mm] E 1 Ao F B 1 Ko Bo E 2 W S 1 P 1 T 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about Bo. Center Lines of Cavity User Direction of Unreeling ØD 1 Embossment For cavity size, see Note 1 Table 4 Table 4 Embossed (Plastic) Carrier Tape Dimensions Metric will govern D Tape Size D 1 Minimum 0 Note mm (0.039) 12 mm 16 mm / 0.0 ( / 0.0) 1.5 (0.059) Constant Dimensions Millimeters (Inches) R Reference E 1 P 0 P 2 Note (0.984) 1.75±0.10 (0.069±0.004) 4.0±0.10 (0.157±0.004) 2.0±0.05 (0.079±0.002) 2.0±0.1 (0.079±0.059) 30 (1.181) S 1 Minimum Note (0.024) T imum (0.024) T 1 imum (0.004) Tape Size Pitch 8 mm Single (4 mm) Single (4 mm) 12 mm & Double (8 mm) 16 mm Triple (12 mm) B 1 imum Note (0.171) 8.2 (0.323) 12.1 (0.476) Variable Dimensions Millimeters (Inches) E 2 Minimum F P 1 T 2 imum W imum A 0, B 0 & K ± ±0.05 or 4.0± (0.246) (0.138±0.002) (0.079±0.002 or 0.157±0.004) (0.098) (0.327) 2.0±0.05 (0.079±0.002) or ±0.10 (0.157±0.004) or (0.181) (0.484) 8.0±0.10 (0.315 ±0.004) Note (0.404) (0.561) 5.5±0.05 (0.217±0.002) 7.5±0.10 (0.295±0.004) 4.0±0.10 (0.157±0.004) to 12.0±0.10 (0.472±0.004) 8.0 (0.315) 16.3 (0.642) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481 D, paragraph 4.3, section b). 4. B 1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A 0, B 0 and K 0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481 D for standards relating to more precise taping requirements. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

15 Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 imum Component Rotation Bo T Ao imum Component Rotation Top View Typical Pocket Centerline imum Component Rotation Side View Tape imum s Width (mm) Rotation ( T) 8, Tape imum Width (mm) Rotation ( 8,12 20 Typical Component Centerline S) Figure 3 imum Lateral Movement Figure 4 Bending Radius 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum 16 mm Tape 1.0 mm maximum 1.0 mm maximum Embossed Carrier Punched Carrier R Bending Radius R KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

16 Figure 5 Reel Dimensions Full Radius, See Note Access Hole at Slot Location (Ø 40 mm minimum) W3 (Includes flange distortion at outer edge) W2 (Measured at hub) A D (See Note) B (see Note) Note: Drive spokes optional; if used, dimensions B and D shall apply. C (Arbor hole diameter) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth N W1 (Measured at hub) Table 5 Reel Dimensions Metric will govern Constant Dimensions Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178±0.20 (7.008±0.008) / mm or (0.059) ( / 0.008) 330± mm (13.000±0.008) Variable Dimensions Millimeters (Inches) 20.2 (0.795) Tape Size N Minimum W 1 W 2 imum W 3 8 mm / ( / 0.0) (0.567) 12 mm / Shall accommodate tape (1.969) ( / 0.0) (0.724) width without interference 16 mm / ( / 0.0) (0.882) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

17 Figure 6 Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Top Cover Tape Components 100 mm Minimum Leader 400 mm Minimum Figure 7 imum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 2 mm imum, either direction for 8 mm wide tape Straight Edge 250 mm KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

18 KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit Disclaimer All product specifi cations, statements, information and data (collectively, the Information ) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation s ( KEMET ) knowledge of typical operating conditions for such applications, but are not intended to constitute and KEMET specifi cally disclaims any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC T2053_T498_AUTO 7/25/

Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Fused T496 Fused MnO 2

Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Fused T496 Fused MnO 2 Overview The T496 tantalum chip capacitors offer a "fail safe" design. The built-in fuse element offers excellent protection from damaging short circuit conditions in applications where damaging high fault

More information

Typical applications include decoupling and filtering, in industrial and automotive high-end applications.

Typical applications include decoupling and filtering, in industrial and automotive high-end applications. Overview The KEMET T489 provides DC leakage current that is 25% lower than the commercial T491. The T489 also offers improved reliability, low ESR options and meets or exceeds the requirements of EIA standard

More information

Tantalum Surface Mount Capacitors Automotive Grade T495 Automotive Grade Surge Robust Low ESR MnO 2

Tantalum Surface Mount Capacitors Automotive Grade T495 Automotive Grade Surge Robust Low ESR MnO 2 T495 Automotive Grade Surge Robust Low MnO 2 Overview The low, surge-robust T495 Automotive, is designed for demanding applications that require high surge current and high ripple current capability. The

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder. Overview The KEMET T491 Series, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface mount designs. The T491 combines KEMET s proven

More information

Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Automotive Grade T491 Automotive/Industrial Grade MnO 2

Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Automotive Grade T491 Automotive/Industrial Grade MnO 2 Overview The KEMET T491, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface mount designs. The T491 combines KEMET s proven solid

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Aluminum Organic Capacitor (AO-CAP) is a solid state aluminum capacitor. The cathode is a conductive organic polymer which results in very low ESR and improved capacitance retention

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold-plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold-plated or Non-magnetic 100% Sn solder. Overview The KEMET T491, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface mount designs. The T491 combines KEMET s proven solid

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder. Overview The KEMET T494 is a lower version of the popular T491, designed specifically for today s highly automated surface mount processes and equipment. The T494 combines KEMET s proven solid tantalum

More information

and DLA Drawing 04053

and DLA Drawing 04053 T496 Fused Commercial Off-The-Shelf (COTS) MnO 2 Overview The T496 commercial-off-the-shelf (COTS) with a builtin fuse design, provides excellent protection from short circuit conditions in applications

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder. Overview The KEMET T491 Series, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface mount designs. The T491 combines KEMET s proven

More information

Series. One WORLD One Brand One Strategy One Focus One Team One KEMET

Series. One WORLD One Brand One Strategy One Focus One Team One KEMET Tantalum Surface Mount acitors T495 Surge Robust Low MnO 2 Overview The low, surge-robust T495 is designed for demanding applications that require high surge current and high ripple current capability.

More information

Series. Applications Typical applications include decoupling and filtering in military and aerospace applications.

Series. Applications Typical applications include decoupling and filtering in military and aerospace applications. High Reliability COTS (CWR11 Style) T493 Military/Aerospace COTS MnO 2 Overview The KEMET T493 is designed for the COTS (Commercial Off-The-Shelf) requirements of military and aerospace applications. This

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The T496 Series of tantalum chip capacitors offers a "fail safe" design. The built-in fuse element offers excellent protection from damaging short circuit conditions in applications where damaging

More information

Applications. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

Applications. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Tantalum Surface Mount Capacitors T496 Fused MnO 2 Overview The T496 of tantalum chip capacitors offers a fail safe design. The built-in fuse element offers excellent protection from damaging short circuit

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. T491 Industrial Grade MnO 2 Series Overview The KEMET T491 Series, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface mount designs.

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder. Tantalum Surface Mount acitors Low Overview The low, surge-robust T495 Series is designed for demanding applications that require high surge current and high ripple current capability. This series builds

More information

Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Low ESR T495 Surge Robust MnO 2

Overview. Benefits. Applications. Environmental Compliance. Tantalum Surface Mount Capacitors Low ESR T495 Surge Robust MnO 2 Tantalum Surface Mount acitors Low Overview The low, surge-robust T495 is designed for demanding applications that require high surge current and high ripple current capability. The T495 builds upon the

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold plated or Non-magnetic 100% Sn solder. Tantalum Surface Mount acitors Low Overview The low, surge-robust T495 Series is designed for demanding applications that require high surge current and high ripple current capability. This series builds

More information

SOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust

SOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust CATHODE (-) END VIEW W SOLID TANTALUM CHIP CAPACITORS Designed for very low ESR High ripple current capability High surge current capability 100% accelerated steady-state aging 100% Surge Current test

More information

Applications. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

Applications. RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. T491 Industrial Grade MnO 2 Series Overview The KEMET T491 Series, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface mount designs.

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Organic acitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies. KO-CAP

More information

One WORLD One Brand One Strategy One Focus One Team One KEMET

One WORLD One Brand One Strategy One Focus One Team One KEMET Tantalum Surface Mount acitors T491 Industrial Grade MnO 2 Overview The KEMET T491, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface

More information

(CWR11 Style) Overview. Tantalum Surface Mount Capacitors High Reliability T493 Commercial Off-The-Shelf (COTS) MnO 2

(CWR11 Style) Overview. Tantalum Surface Mount Capacitors High Reliability T493 Commercial Off-The-Shelf (COTS) MnO 2 T493 Commercial Off-The-Shelf (COTS) MnO 2 Overview The KEMET T493 is designed for the commercial offthe-shelf (COTS) requirements of military and aerospace applications. The T493 is a surface mount product,

More information

KEMET Organic Capacitor (KO-CAP ) High Reliability T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.

KEMET Organic Capacitor (KO-CAP ) High Reliability T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2. T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 63 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable

More information

Series. Environmental Compliance RoHS Compliant (6/6)* according to Directive 2002/95/EC *When ordered with 100% Sn Solder

Series. Environmental Compliance RoHS Compliant (6/6)* according to Directive 2002/95/EC *When ordered with 100% Sn Solder Tantalum Surface Mount acitors T491 Industrial Grade MnO 2 Overview The KEMET T491, designed specifically for today s highly automated surface mount processes and equipment, is the leading choice for surface

More information

Overview. Benefits. One world. One KEMET

Overview. Benefits. One world. One KEMET T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 63 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable

More information

Tantalum Surface Mount Capacitors

Tantalum Surface Mount Capacitors Tantalum Surface Mount Capacitors Standard Tantalum One world. One KEMET. Electronic Components Tantalum Surface Mount Capacitors Standard Tantalum Table of Contents Page Why Choose KEMET... 3 T491 Series

More information

SOLID TANTALUM CHIP CAPACITORS T496 SERIES Fail-Safe Fused

SOLID TANTALUM CHIP CAPACITORS T496 SERIES Fail-Safe Fused Built-in fuse protects against damaging short circuit failure mode Precision-molded, laser-marked case Symmetrical, compliant terminations Taped and reeled per EIA 481-1 geometry and footprints equivalent

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies.

More information

Aluminum Surface Mount Capacitors

Aluminum Surface Mount Capacitors Aluminum Surface Mount Capacitors Polymer Aluminum One world. One KEMET. Electronic Components Aluminum Surface Mount Capacitors Polymer Aluminum Table of Contents Page Why Choose KEMET... 3 A700 Series

More information

SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR

SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low ESR SOLID TANTALUM CHIP CAPACITORS T510 SERIES High Capacitance-Low Ultra Low < 30 mω New E/7260 Case with < 18 mω Up to 5 Amps ripple current RoHS Compliant & Leadfree Termination (see www. kemet.com for

More information

SM20 B 153 K 501 B M. Capacitance Tolerance K = ±10% M = ±20%

SM20 B 153 K 501 B M. Capacitance Tolerance K = ±10% M = ±20% KPS HV, Large Case, SM Series, X7R Dielectric, 500 10,000 VDC (Industrial Grade) Overview KPS HV (KEMET Power Solutions, High Voltage), Large Case ( 1515), SM Series capacitors in X7R dielectric are designed

More information

Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T

Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications

More information

SOLID TANTALUM CHIP CAPACITORS

SOLID TANTALUM CHIP CAPACITORS SOLID TANTALUM CHIP CAPACITORS T491 SERIES - Precision Molded Chip Meets or Exceeds EIA Standard 535BAAC Taped and Reeled per EIA 481-1 Symmetrical, Compliant Terminations Optional Gold-plated Terminations

More information

SM20 N 472 J 501 B M. Capacitance Tolerance J = ±5% K = ±10% M = ±20%

SM20 N 472 J 501 B M. Capacitance Tolerance J = ±5% K = ±10% M = ±20% KPS HV, Large Case, SM Series, C0G Dielectric, 500 10,000 VDC (Industrial Grade) Overview KPS HV (KEMET Power Solutions, High Voltage), Large Case ( 1515), SM Series capacitors in C0G dielectric are designed

More information

ALUMINUM ORGANIC CAPACITORS

ALUMINUM ORGANIC CAPACITORS ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter

More information

Series. Applications. One WORLD One Brand One Strategy One Focus One Team One KEMET

Series. Applications. One WORLD One Brand One Strategy One Focus One Team One KEMET Tantalum Surface Mount acitors T494 Industrial Grade Low MnO 2 Overview The KEMET T494 is a lower version of the popular T491, designed specifically for today s highly automated surface mount processes

More information

General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.

General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC. General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation

More information

CONDUCTIVE POLYMER CHIP CAPACITORS

CONDUCTIVE POLYMER CHIP CAPACITORS FEATURES Polymer Cathode Technology Use Up to 80% of Rated Voltage (20% Derating) Low for part types > 10 Volts High Frequency Cap Retention Capacitance 15 to 1000µF (±20%) No-Ignition Failure Mode Voltage

More information

ALUMINUM ORGANIC CAPACITORS

ALUMINUM ORGANIC CAPACITORS ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter

More information

SOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust

SOLID TANTALUM CHIP CAPACITORS T495 SERIES Low ESR, Surge Robust SOLI TANTALUM CHIP CAPACITORS esigned for very low SR High ripple current capability High surge current capability % accelerated steady-state aging % Surge Current test Meets or xceeds IA Standard 535BAAC

More information

Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.

Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros. General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor

More information

Overview. Benefits. Applications

Overview. Benefits. Applications ESD, C0G Dielectric, 25 250 VDC (Commercial & Automotive Grade) Overview The KEMET electrostatic discharge (ESD) rated commercial and automotive grade surface mount capacitors in C0G dielectric are suited

More information

C 1210 C 184 K 3 H A C AUTO. Rated Voltage (VDC) Packaging/ Grade (C-Spec) Dielectric

C 1210 C 184 K 3 H A C AUTO. Rated Voltage (VDC) Packaging/ Grade (C-Spec) Dielectric High Temperature 1 C, Ultra-Stable X8R Dielectric, VDC (Commercial & Automotive Grade) Overview KEMET s Ultra-Stable X8R dielectric features a 1 C maximum operating temperature, offering the latest in

More information

Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T

Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance retention at high frequencies.

More information

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance

More information

Applications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V

Applications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V SPC Series Encapsulated Double Metallized, Size 2824 6560, 100 630 VDC Overview Film capacitor for surface mounting. Double sided metallized film as electrode. Plain polyphenylene sulfide (PPS) as dielectric.

More information

C 0603 C 104 J 3 R E C AUTO. Capacitance Tolerance. Rated Voltage (VDC) J = ±5% K = ±10% M = ±20% 3 = 25 5 = 50 M = 63 1 = = 200

C 0603 C 104 J 3 R E C AUTO. Capacitance Tolerance. Rated Voltage (VDC) J = ±5% K = ±10% M = ±20% 3 = 25 5 = 50 M = 63 1 = = 200 ESD, X7R Dielectric, 16 250 VDC (Commercial & Automotive Grade) Overview The KEMET electrostatic discharge (ESD) rated commercial and automotive grade surface mount capacitors in X7R dielectric are suited

More information

Overview. Benefits. Ordering Information

Overview. Benefits. Ordering Information Axial Leaded Multilayer Ceramic Capacitors Aximax, 400, Conformally Coated, X7R Dielectric, 25 250 VDC (Automotive Grade) Overview KEMET s Aximax conformally coated axial leaded ceramic capacitors in X7R

More information

CONDUCTIVE POLYMER CHIP CAPACITORS

CONDUCTIVE POLYMER CHIP CAPACITORS CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap FEATURES Polymer Cathode Technology Use Up to 80% of (20% Derating) Low for part types > 10 Volts High Frequency Cap Retention 15 to 1000μF (±20%)

More information

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance

More information

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) High Reliability T543 COTS Polymer Electrolytic, VDC

Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) High Reliability T543 COTS Polymer Electrolytic, VDC KEMET Organic Capacitor (KO-CAP ) High Reliability Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved

More information

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned

More information

OBSOLETE. General Specifications. Key Features. Applications. Outline Dimensions CLR 79 (MIL-C-39006/22) CLR 81 (MIL-C-39006/25)

OBSOLETE. General Specifications. Key Features. Applications. Outline Dimensions CLR 79 (MIL-C-39006/22) CLR 81 (MIL-C-39006/25) General Specifications Operating : Working Voltage: Key Features Applications -55 C to +125 C, with voltage derating above 85 C, ( voltage at 125ºC is 2/3 of the value at 85ºC) 6 to 125 WVdc Tolerance:

More information

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial L Series, SnPb Termination, X7R Dielectric 6.3V 250 VDC (Commercial Grade)

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial L Series, SnPb Termination, X7R Dielectric 6.3V 250 VDC (Commercial Grade) Commercial L Series, SnPb Termination, X7R Dielectric V 2 VDC (Commercial Grade) Overview KEMET s Commercial L Series with Tin/Lead Termination surface mount capacitors in X7R dielectric are designed to

More information

Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE

Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends

More information

Voltage Conditioning DWV C CAP DF C 1210 T 104 K 5 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 5 = 50 1 = = 200 A = 250

Voltage Conditioning DWV C CAP DF C 1210 T 104 K 5 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 5 = 50 1 = = 200 A = 250 Commercial Off-The-Shelf (COTS) for Higher Reliability Applications, X7R Dielectric, 2 VDC Overview KEMET s COTS program is an extension of KEMET knowledge of high reliability test regimes and requirements.

More information

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching

More information

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching

More information

Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250

Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250 X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies & Materials

More information

Applications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits.

Applications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits. Axial Aluminum Electrolytic Capacitors PEG124, +105 C and +125 C Overview Applications KEMET's PEG124 is an electrolytic capacitor with very longlife and outstanding electrical performance. The device

More information

Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)

Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene

More information

Applications F5A H C 4100 DQ A 6 K. Lead and Packaging Code See Ordering Options Table. Capacitance Code (pf)

Applications F5A H C 4100 DQ A 6 K. Lead and Packaging Code See Ordering Options Table. Capacitance Code (pf) F5A Series Metallized Polyester Film with Integrated Ceramic Varistor, 18 63 VDC Overview The F5A Series is a metallized polyester (MKT) film capacitor with integrated ceramic varistor encapsulated in

More information

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) KPS Series, X7R Dielectric, VDC (Automotive Grade) Capacitance Tolerance1

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) KPS Series, X7R Dielectric, VDC (Automotive Grade) Capacitance Tolerance1 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Overview KEMET Power Solutions (KPS) Automotive Series stacked capacitors utilize a proprietary lead-frame technology to vertically stack one

More information

Applications R71 M F 2100 AA 00 J

Applications R71 M F 2100 AA 00 J Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads

More information

Applications C87 8 B F AA 4 J

Applications C87 8 B F AA 4 J C87, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview C87 is a polypropylene metallized film, with a cylindrical aluminium can-type construction filled with resin. It uses faston,

More information

Applications. Overview. Technical Specifications

Applications. Overview. Technical Specifications FLLD4 TH, 53/35 VAC, 8 A High Performance Chassis Mount Three-Phase and Neutral Filters Overview These are compact, general purpose, three-phase + N filters, with terminal blocks for quick installation

More information

Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade)

Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade) X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies and Materials

More information

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical

More information

Applications. Output Voltage (V) V21 = 2

Applications. Output Voltage (V) V21 = 2 Current Sensors L2, Magnetic Direct Current Sensor Overview The L2 Magnetic Direct Current Sensors (MDCS TM ) use our proprietary magnetic material and hall element for magnetic detection of direct current

More information

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V FEATURES Improved reliability 2x standard DCL reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130

More information

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical

More information

Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Aluminum Electrolytic Capacitors Accessories Mounting Kits

Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Aluminum Electrolytic Capacitors Accessories Mounting Kits Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Dimensions in mm. All of the above accessories may be ordered individually using the part number shown or as kits using the

More information

Applications. Internal Connection

Applications. Internal Connection Overview Polypropylene metallized film with cylindrical aluminium can type filled with oil, 3 phase terminal delta and safety device FPU. Applications Typical applications include power factor correction.

More information

DISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT

DISCONTINUED CONTACT KEMET FOR EQUIVALENT REPLACEMENT Dipped, Radial Leaded, Solid Tantalum Capacitors Specifications Capacitance Range: Voltage Range: Tolerance: Operating Temperature Range: DC Leakage: Capacitance Change imum: Reverse Voltage (Non-continuous):

More information

Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available

Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,

More information

TMJ Tantalum SMD S1gma TM Series Capacitors

TMJ Tantalum SMD S1gma TM Series Capacitors The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely

More information

General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, VDC, High Current. Applications

General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, VDC, High Current. Applications General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, 50 630 VDC, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting.

More information

Rated Voltage (VDC) 9 = = 10 3 = 25 5 = 50 1 = = 200 A = 250 C = 500

Rated Voltage (VDC) 9 = = 10 3 = 25 5 = 50 1 = = 200 A = 250 C = 500 CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 500 VDC (RF & Microwave) Overview KEMET s CBR Series surface mount multilayer ceramic capacitors (MLCCs) in C0G dielectric feature a robust and exceptionally

More information

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply

More information

Type BPDS Polypropylene Board Mount DC Link Capacitors PCB Mount Power Film Capacitors

Type BPDS Polypropylene Board Mount DC Link Capacitors PCB Mount Power Film Capacitors Specifications Capacitance Range Capacitance Tolerance 1μF - 200 μf ±5%(J) ±10%(K) Rated Voltage 450 Vdc - 1800 Vdc @ 85 C, 500 Vdc - 2000 Vdc @ 70 C Maximum Operating Temperature +105 C Upper Temperature

More information

Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade)

Overview. Benefits. Applications. Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R Dielectric, VDC (Commercial Grade) X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies and Materials

More information

MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters

MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)

More information

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications

FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply

More information

MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters

MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)

More information

Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum

Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches

More information

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V

Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V FEATURES Improved reliability 2x standard reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130 low

More information

NTA Series Isolated 1W Dual Output SM DC/DC Converters

NTA Series Isolated 1W Dual Output SM DC/DC Converters www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame

More information

SELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage

SELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt

More information

General Purpose, High Stability and AC Line EMI Suppression MMC Series Encapsulated Winding, Size , VDC.

General Purpose, High Stability and AC Line EMI Suppression MMC Series Encapsulated Winding, Size , VDC. General Purpose, High Stability and AC Line EMI Suppression MMC Series Encapsulated Winding, Size 2220 6560, 50 400 Overview KEMET s MMC Series polyester (PET) film capacitor for surface mounting is encapsulated

More information

NXE1 Series Isolated 1W Single Output SM DC-DC Converters

NXE1 Series Isolated 1W Single Output SM DC-DC Converters NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise

More information

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on

More information

NXE1 Series Isolated 1W Single Output SM DC/DC Converters

NXE1 Series Isolated 1W Single Output SM DC/DC Converters NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture

More information

Applications GPC K 63 K31 TR12. Capacitance Tolerance K = ±10% M = ±20% Other tolerances on request F 117 S G 471 K 063 V

Applications GPC K 63 K31 TR12. Capacitance Tolerance K = ±10% M = ±20% Other tolerances on request F 117 S G 471 K 063 V General Purpose, High Stability and AC Line EMI Suppression GPC Series Encapsulated Double Metallized, Size 2824 6560, 63 1,000 VDC Overview Film capacitor for surface mounting. Double sided metallized

More information

Applications R46 K I M

Applications R46 K I M Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide

More information

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry

More information

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,

More information

Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250

Applications C 1206 C 106 M 4 R A C TU. Rated Voltage (VDC) 9 = = 10 4 = 16 3 = 25 6 = 35 5 = 50 1 = = 200 A = 250 Surface Mount Multilayer Ceramic Chip acitors (SMD MLCCs) X7R Dielectric, 2 VDC (Commercial Grade) Overview KEMET s X7R dielectric features a 1 C maximum operating temperature and is considered temperature

More information