CARRY PUMPS CARRY MANUFACTURING, INC.

Transcription

1 CARRY PUMPS CARRY MANUFACTURING, INC Prospect Avenue Caro, MI Phone: CARRY or Fax: or

2

3 STORM WATER MODELS Carry's Stainless Steel Axial-Flow Submersible pumps are an economical solution for high-volume, low-head flow applications. The Carry line offers single pumps with the capacity for 50 to 2,800 GPM at 2 to 25 feet of total dynamic head. These pumps are also efficient and economical in parallel use for larger volumes. Carry Stainless Steel Axial-Flow Submersible pumps employ axial-flow lift. Smooth, low-vibration, and lowpressure axial-flow lift is more efficient than centrifugal force for low-head, high-volume pumping. The simplicity of the axial-flow design is one key reason why Carry Stainless Steel Axial-Flow Submersibles are so durable. Carry Submersible pumps are manufactured of all stainless steel components: investment castings, CNC precision machining, stainless steel fasteners, submersible cable and quality Franklin Electric Submersible motors. The stainless steel construction means that the pumps are corrosion resistant and will not rust, making them longer lasting and more durable than conventional cast iron pumps. The water lubricated submersible motors contain no grease or oil for easy maintenance and no contamination. Carry pumps are economical to operate. Standard applications cost just pennies a day to operate. The pumps are available in vertical or horizontal versions, single or three phase, a variety of horsepower and voltages to meet the unique needs of your application. Carry Stainless Steel Axial-Flow Submersible Pumps come complete with a Franklin Submersible Motor installed inside a stainless steel casing. This motor was Designed to Live Underwater because of the following features: 1. Its windings are completely hermetically sealed in a steel enclosure with both the outer and inner casings of stainless steel. The enclosure is surrounded and cooled by water. 2. Its rotor, consisting only of laminations and a copper or aluminum cage, runs in water with no ill effect but with the most effective cooling possible, a direct immersion in water. 3. Its bearings, both radial and thrust, are completely submerged in clean water. They require no other lubrication and therefore have an everlasting source of lubricant water. These features make the Franklin Submersible Motor highly efficient, while reducing the possibilities of rust and wear on components. Storm - i Effective 02/2016

4 STORM WATER MODELS Carry Stainless Steel Axial-Flow Submersible pumps provide solutions for a wide variety of applications. AGRICULTURAL APPLICATIONS: * Provides efficient pumping for tile drainage. * Excellent for use in applications where the field tile must be installed lower than the outlet ditch level. * Provides low-pressure pumping for transfer, de-watering and sub-irrigation systems. * Enables pumping from pond-to-pond, ditch-to-pond, pond-to-river, etc. * Can be used to create landscaping features like man-made waterfalls and artesian wells. * Examples: farmland, agricultural sub-irrigation, golf course watering systems, landscaping, wetlands management, septic fields, etc. Storm - ii Effective 02/2016

5 STORM WATER MODELS * Carry Manufacturing does not recommend the use of 1 to 3 Horsepower Franklin Electric Motors for use in continuous duty applications such as fish farms. The life expectancy of the motors may be too short. Application conditions can also contribute to shorter life spans. For instance, water temperature, mounting position, flow rates and head pressure can all play a role. Carry suggests the use of a Sumoto motor in such cases. MUNICIPAL APPLICATIONS: * Conserves energy and equipment - Carry Stainless Steel Axial Flow Submersibles are less expensive than large pumps to purchase, operate, and maintain. * Carry Stainless Steel Axial-Flow Submersible pumps can often be retro-fitted economically into existing stations. Storm - iii Effective 02/2016

6 STORM WATER MODELS * Provides supplemental low-flow pumping in large storm stations. * Handles many storm events without the need of larger pumps. * Provides auxiliary pumping during peak-flow in large storm stations. * Offers effective parallel pumping for duplex, triplex, or quadplex stations. * Provides effective pumping for roof and paved storm-flow pump stations. * Examples: municipal storm-flow pumping stations, subdivisions, shopping malls, industrial sites, parking lots, detention and retention basins, etc. Storm - iv Effective 02/2016

7 STORM WATER MODELS Standard 4" Pump 1 Horsepower Performance Curve (2015) Standard 4" Pump 1-1/2 Horsepower Performance Curve Storm - v Effective 02/2016

8 STORM WATER MODELS Standard 4" Pump 2 Horsepower Performance Curve Standard 4" Pump 3 Horsepower Performance Curve Storm - vi Effective 02/2016

9 STORM WATER MODELS Note: Impeller # 3 NOT recommended for use with fixed speed applications. Standard 6" Pump 5 Horsepower Performance Curve Standard 6" Pump 7-1/2 Horsepower Performance Curve Storm - vii Effective 02/2016

10 STORM WATER MODELS Standard 6" Pump 10 Horsepower Performance Curve Standard 6" Pump 15 Horsepower Performance Curve Storm - viii Effective 02/2016

11 STORM WATER MODELS High Volume 6" (CP06) Pump 7-1/2 Horsepower Performance Curve High Volume 6" (CP06) Pump 10 Horsepower Performance Curve Storm - ix Effective 02/2016

12 STORM WATER MODELS High Volume 6" (CP06) Pump 15 Horsepower Performance Curve High Volume 8" (CP08) Pump 20 Horsepower w/ 10E Impeller Performance Curve Storm - x Effective 02/2016

13 STORM WATER MODELS High Volume 8" (CP08) Pump 20 Horsepower w/ 13E Impeller Performance Curve High Volume 8" (CP08) Pump 20 Horsepower w/ 16E Impeller Performance Curve Storm - xi Effective 02/2016

14 STORM WATER MODELS High Volume 8" (CP08) Pump 25 Horsepower w/ 13E Impeller Performance Curve High Volume 8" (CP08) Pump 25 Horsepower w/ 16E Impeller Performance Curve Storm - xii Effective 02/2016

15 STANDARD 4" DISCHARGE STORM WATER MODELS PUMP SPECIFICATIONS: PUMP: < Axial-Flow/Lift < Stainless Steel construction < Stainless Steel impeller, investment casting, dynamically balanced DISCHARGE: < 4" Diameter < NPT standard threading, male 60 or 50 Hz SERVICE: < Single Phase or Three Phase IMPELLER: < 9E 3-blade: 1HP < 11E 3-blade: 1HP < 13E 4-blade: 1, 1-1/2, 2 or 3HP < 17E 4-blade: 1-1/2, 2 or 3HP < 23E 4-blade: 1-1/2, 2 or 3HP CYCLE CAPACITY: < up to 300 times per 24 hour period < See each HP page for specifics MOTOR: < Franklin Electric 4" Super Stainless Submersible < Franklin Electric 4" High Thrust Submersible (2 or 3HP Oil Stripper) < Thrust Capacity: 650 pounds (1, 1-1/2, or 2HP) < Thrust Capacity: 900 pounds (3HP) < Thrust Capacity: 1500 pounds (2 or 3HP Oil Stripper) < 3450 RPM (2875 for 50 Hz) < Corrosion Resistant All Stainless Steel Exterior Construction < Stainless Steel Splined Shaft < Hermetically-Sealed Windings < Mechanical Seal (600M Motors only) < Anti-Track Self Healing Resin System < Water Lubrication < Filter Check Valve < Kingsbury-type Thrust Bearing < Pressure Equalizing Diaphragm < Built-in Lightning Arrestors (All Single Phase; 200 & 230 Volt, Three Phase for 1, 1-1/2, 2 or 3HP) < UL 778 Recognized, CSA Certified < Sumoto motors are also available for certain applications, contact the factory for specifics. Storm - 1 Effective 02/2015

16 STANDARD 4" DISCHARGE STORM WATER MODELS VERTICAL PUMP ONLY Dimensions (in inches) Voltage Weight (pounds) A-Minimum Submergence B-Height C-Overall Height 1HP/1PH HP/3PH 200, 230 or HP/1PH/ 2-Wire 1.5HP/1PH/ 3-Wire HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above. Contact the factory for specifics. Storm - 2 Effective 02/2015

17 STANDARD 4" DISCHARGE STORM WATER MODELS VERTICAL PUMP WITH PVC SCREEN Dimensions (in inches) Voltage Weight (pounds) A-Height B-Minimum Submergence C-Screen Height D-Overall Height 1HP/1PH HP/3PH 200, 230 or HP/1PH/ 2-Wire 1.5HP/1PH/ 3-Wire HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above. Contact the factory for specifics. Note: PVC Screens sold separately. See Accessories Section, page 1. Storm - 3 Effective 02/2015

18 STANDARD 4" DISCHARGE STORM WATER MODELS Recuperator Impeller Bolt/Lock Washer Motor Nuts/Lock Washers Impeller Cord Clamp/Tie Strap Pump Shell Motor Motor Lead Base Pad/Spacer Block Base Pad Bolts/Lock Washers AVAILABLE OPTIONS: < Control Panels, Standard or Delux and other options, see Accessories Section, page 36. < Variable Frequency Drives, see Accessories Section, page 75. < Floats, 120/230 Volt DFD, see Accessories Section, page 9. < PVC Stainer Screens, see Accessories Section, page 1. < Pump Rings, see Accessories Section, page 4. < Motor Leads, see Accessories Section, page 5. < Lift Chain and Quick Links, see Accessories Section, page 7. < Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22. < Swing Check Valves, see Accessories Section, page 28. < Flap Valves and Gates, see Accessories Section, page 29. < Quick Disconnects, see Accessories Section, page 31. < Flexible Couplers, see Accessories Section, page 35. Storm - 4 Effective 02/2015

19 STANDARD 4" DISCHARGE STORM WATER MODELS HORIZONTAL PUMPS: Carry s Stainless Steel Axial Flow Submersible pumps are also available in a horizontal style. These pumps have the same components of the vertical pumps, ie. motor, lead, impeller, recuperator, control panels, floats etc. By placing the pumps on their side we have reduced the minimum submergence height. This means that the pump is able to pump closer to the bottom of the sump pit and can be placed in much shorter sumps. These pumps are available with a PVC intake horn, with a PVC strainer screen or with a plain intake. See the following diagrams. For more information about intake horns and strainer screens, see the Accessories Section. Please note: horizontal pump motors typically have a shorter life expectancy than its vertical counterpart. Franklin submersible motors are designed primarily for operation in the vertical, shaft up position. During acceleration, the pump thrust increases as its output head increases. In cases where the pump head stays below its normal operation range during start-up and full speed conditions, the pump may create upward thrust. This creates upward thrust on the motor up thrust bearing. This is an acceptable operation for short periods at each start, but running continuously with upthrust will cause excessive wear on the upthrust bearing. As the mounting position of the motor becomes further from vertical and closer to horizontal, the probability of shortened thrust bearing life increases. For normal motor life expectancy in horizontal pumps, we have designed the pump with a slight rise using the feet of the pump to raise the discharge (shaft end) of the pump. Application should limit the starts to 10 within a 24 hour period. In horizontal applications where this is not possible, Carry suggests the use of a Sumoto motor in place of the Franklin Electric submersible motor. See the Replacements Section of the catalog for more information on Sumoto motors. Storm - 5 Effective 02/2015

20 STANDARD 4" DISCHARGE STORM WATER MODELS HORIZONTAL PUMP ONLY Dimensions (in inches) Voltage Weight (pounds) A-Pump Length B-Overall Length 1HP/1PH HP/3PH 200, 230 or HP/1PH/2-Wire HP/1PH/3-Wire HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH Note: 3HP/3PH 200, 230, 460 or The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above. Contact the factory for specifics. Storm - 6 Effective 02/2015

21 STANDARD 4" DISCHARGE STORM WATER MODELS HORIZONTAL PUMP WITH INTAKE HORN Dimensions (in inches) Voltage Weight (pounds) A-Pump Length B-Overall Length 1HP/1PH HP/3PH 200, 230 or HP/1PH/2-Wire HP/1PH/3-Wire HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above. Contact the factory for specifics. Note: PVC Intake Horns sold separately. See Accessories Section, page 4. Storm - 7 Effective 02/2015

22 STANDARD 4" DISCHARGE STORM WATER MODELS HORIZONTAL PUMP WITH PVC SCREEN Dimensions (in inches) Voltage Weight (pounds) A- Height B-Pump Width C-Screen Length D-Pump Length E-Overall Length 1HP/1PH HP/3PH 200, 230 or HP/1PH/2-Wire HP/1PH/3-Wire HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above. Contact the factory for specifics. Note: PVC Screens sold separately. See Accessories Section, page 1. Storm - 8 Effective 02/2015

23 STANDARD 4" DISCHARGE STORM WATER MODELS Pump Shell Motor Nuts/ Lock Washers Base Pad/Spacer Block Base Pad Bolts/Lock Washers Recuperator Impeller Cord Clamp/Tie Strap Impeller Bolt/Lock Washer Motor Motor Lead AVAILABLE OPTIONS: < Control Panels, Standard or Delux and other options, see Accessories Section, page 36. < Variable Frequency Drives, see Accessories Section, page 75. < Floats, 120/230 Volt DFD, see Accessories Section, page 9. < PVC Strainer Screens, see Accessories Section, page 1. < PVC Intake Horns, see Accessories Section, page 4. < Motor Leads, see Accessories Section, page 5. < Lift Chain and Quick Links, see Accessories Section, page 7. < Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22. < Swing Check Valves, see Accessories Section, page 28. < Flap Valves and Gates, see Accessories Section, page 29. < Quick Disconnects, see Accessories Section, page 31. < Flexible Couplers, see Accessories Section, page 35. Storm - 9 Effective 02/2015

24 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 4" DISCHARGE STORM WATER MODELS PUMP MODEL # X-31 or X-31H MOTOR MODEL # * HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX. LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE** CONTROL PANEL MODEL # Wire 14/2 W/G N/A N/A SM Wire 16/2 W/G N/A N/A Y5.6 B5.7 R3.4 Y5.6 B5.7 R3.4 Y8.1 B6.2 R3.3 Y8.1 B6.2 R3.3 FLOAT MODEL # Wire 14/3 W/G Wire 600M 14/3 W/G X-31 or X-31H X-31 or X-31H N/A 14/3 W/G N/A 14/3 W/G M 14/3 W/G SM N/A 16/3 W/G N/A 14/3 W/G M 14/3 W/G SM N/A 16/3 W/G * W/G indicates With Ground Wire. Storm - 10 Effective 02/2015

25 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 4" DISCHARGE STORM WATER MODELS PUMP MODEL # X-31 or X-31H X-31 or X-31H MOTOR MODEL # * HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX. LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE** CONTROL PANEL MODEL # / Wire 14/2 W/G N/A N/A SM / Wire 16/3 W/G N/A N/A / / Y10.0 B9.9 R1.3 Y10.0 B9.9 R1.3 Y10.0 B9.9 R1.3 Y10.0 B9.9 R1.3 FLOAT MODEL # Wire 14/3 W/G Wire 600M 14/3 W/G / N/A 14/3 W/G / N/A 14/3 W/G / M 14/3 W/G SM / N/A 16/3 W/G X-31 or X-31H / N/A 14/3 W/G / M 14/3 W/G SM / N/A 16/3 W/G / N/A 14/3 W/G * W/G indicates With Ground Wire. Storm - 11 Effective 02/2015

26 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 4" DISCHARGE STORM WATER MODELS PUMP MODEL # X-31 or X-31H X-31 or X-31H X-31 or X-31H MOTOR MODEL # * HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS Y10.0 B9.3 R2.6 Y10.0 B9.3 R2.6 Y10.0 B9.3 R2.6 MAX. LOAD AMPS Y13.2 B11.9 R2.6 Y13.2 B11.9 R2.6 Y13.2 B11.9 R2.6 LOCKED ROTOR AMPS MOTOR CORD SIZE** CONTROL PANEL MODEL # FLOAT MODEL # Wire 14/3 W/G Wire 600M Oil Stripper 14/3 W/G /3 W/G N/A 14/3 W/G N/A 14/3 W/G M 14/3 W/G Oil Stripper 14/3 W/G SM N/A 16/3 W/G N/A 14/3 W/G M 14/3 W/G Oil Stripper 14/3 W/G SM N/A 16/3 W/G N/A 14/3 W/G * W/G indicates With Ground Wire. Storm - 12 Effective 02/2015

27 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 4" DISCHARGE STORM WATER MODELS PUMP MODEL # X-31 or X-31H X-31 or X-31H X-31 or X-31H MOTOR MODEL # * HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS Y14.0 B11.2 R6.1 Y14.0 B11.2 R6.1 Y14.0 B11.2 R6.1 MAX. LOAD AMPS Y17.0 B12.6 R6.0 Y17.0 B12.6 R6.0 Y17.0 B12.6 R6.0 LOCKED ROTOR AMPS MOTOR CORD SIZE** CONTROL PANEL MODEL # FLOAT MODEL # 83.4 N/A 14/3 W/G M 14/3 W/G Oil Stripper 14/3 W/G N/A 14/3 W/G N/A 14/3 W/G M 14/3 W/G SM N/A 16/3 W/G N/A 14/3 W/G M 14/3 W/G Oil Stripper 14/3 W/G SM N/A 16/3 W/G N/A 14/3 W/G * W/G indicates With Ground Wire. Storm - 13 Effective 02/2015

28 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 4" DISCHARGE STORM WATER MODELS 1 HORSEPOWER PERFORMANCE CURVE Storm - 14 Effective 02/2015

29 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 4" DISCHARGE STORM WATER MODELS 1-1/2 HORSEPOWER PERFORMANCE CURVE Storm - 15 Effective 02/2015

30 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 4" DISCHARGE STORM WATER MODELS 2 HORSEPOWER PERFORMANCE CURVE Storm - 16 Effective 02/2015

31 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 4" DISCHARGE STORM WATER MODELS 3 HORSEPOWER PERFORMANCE CURVE Storm - 17 Effective 02/2015

32 STANDARD 4" DISCHARGE STORM WATER MODELS SINGLE PHASE CONTROL PANELS: Franklin Control Panels are reliable "Workhorses" for your commercial or agricultural installations. Start capacitors provide high torque start-ups, while motor matched run capacitors offer smooth, quiet, efficient motor operation. Manual reset overloads protect your motor and pumping equipment from abnormal conditions. Control Panels have a magnetic contactor and large terminal blocks. Note: Carry recommends the use of Franklin Electric single phase control panels with Carry single phase pumps and 3-wire motors. The start and run capacitors are housed in the control panel, not the motor. The pump will not operate without these capacitors. See Accessories Section, page 36 for more details on Single Phase Control Panels. THREE PHASE CONTROL PANELS: Carry designed Three Phase control panels feature NEMA 3R enclosures, IEC adjustable motor starters, disconnects, time delays, circuit breakers, transformers and switches. Franklin Three Phase control panels are simple and functional controls with NEMA 3R enclosures, main circuit breaker disconnects, universal transformers, contactors, overloads and Hand-Off- Auto switches. Carry Designed Panel Franklin Panel See Accessories Section, page 45 for more details on Three Phase Control Panels. VARIABLE FREQUENCY DRIVE PACKAGES: Carry has developed a package that includes a Variable Frequency Drive in a NEMA 4 fiberglass enclosure along with a pressure level transducer, flow sensor and lightning arrestor to operate in pumping applications. These packages allow you to achieve higher flow rates with lower horsepower and smaller sumps. These packages can be used with Single Phase or Three Phase input power to operate a Three Phase pump. See Accessories Section, page 75 for more details on Variable Frequency Drives and packages. 120/230 VOLT DFD FLOATS: DFD floats are used as a switch to operate the pump on and off with the water level in the pump pit. The floats have a pumping range of 1" to 48" and contain a heavy-duty mercury switch with a holding relay sealed inside one float. See the Accessories Section, page 9 for more details on DFD Floats. PVC STRAINER SCREENS: PVC Strainer Screens are available for vertical and horizontal pumps. They are designed to allow for water flow while restricting debris from reaching the pump. They are made of SDR35 PVC pipe and high density polyethylene for light weight durability. See the Accessories Section, page 1 for more details on PVC Strainer Screens. Storm - 18 Effective 02/2015

33 STANDARD 4" DISCHARGE STORM WATER MODELS SPECIFICATIONS: 1 Horsepower Single Phase Two Wire 50 Hertz or Three Phase or Three Wire or 60 Hertz 200 Volts or 230 Volts or 460 Volts 9E 3-blade Impeller 11E 3-blade Impeller or or 13E 4-blade Impeller The pump shall be composed of the following: Motor: A Franklin Electric 4" Super Stainless Submersible Motor (2-wire or 3-wire); rated 1 Horsepower with a service factor of 1.40 (1.0 for 50 Hz); thrust capacity of 650 pounds; RPM of 3450 (2875 for 50 Hz); corrosion resistant all stainless steel exterior construction; stainless steel splined shaft; hermetically-sealed windings; anti-track self healing resin system; water lubrication; filter check valve; Kingsbury-type thrust bearing; pressure equalized diaphragm; mechanical seal on 600M motors only and built-in lightning arrestor (all single phase, 200 & 230 volt, three phase). Contact the factory for specifics of the Sumoto 4" Motor. Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SJEOW 14 AWG/2-wire (C.S.A. approved) lead with ground or A 30' SEOW 14 AWG/3-wire (C.S.A. approved) lead with ground. Single Phase = 100 times per 24 hour period, Three Phase = 300 times per 24hour period. Axial-Flow A discharge of 4" diameter with male threading, NPT standard. Storm - 19 Effective 02/2015

34 STANDARD 4" DISCHARGE STORM WATER MODELS SPECIFICATIONS: 1-1/2 Horsepower Single Phase Two Wire 50 Hertz or Three Phase or Three Wire or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts 17 o 4-Blade Impeller 23 o 4-Blade Impeller or The pump shall be composed of the following: Motor: A Franklin Electric 4" Super Stainless Submersible Motor (2-wire or 3-wire); rated 1-1/2 Horsepower with a service factor of 1.30 (1.0 for 50 Hz); thrust capacity of 650 pounds; RPM of 3450 (2875 for 50 Hz); corrosion resistant all stainless steel exterior construction; stainless steel splined shaft; hermetically-sealed windings; anti-track self healing resin system; water lubrication; filter check valve; Kingsbury-type thrust bearing; pressure equalized diaphragm; mechanical seal on 600M motors only and built-in lightning arrestor (all single phase, 200 & 230 volt, three phase). Contact the factory for specifics of the Sumoto 4" Motor. Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SJEOW 14 AWG/2-wire (C.S.A. approved) lead with ground or A 30' SEOW 14 AWG/3-wire (C.S.A. approved) lead with ground. Single Phase = 100 times per 24 hour period, Three Phase = 300 times per 24 hour period. Axial-Flow A discharge of 4" diameter with male threading, NPT standard. Storm - 20 Effective 02/2015

35 STANDARD 4" DISCHARGE STORM WATER MODELS SPECIFICATIONS: 2 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts Storm Water or Oil Stripper 17 o 4-Blade Impeller 23 o 4-Blade Impeller or The pump shall be composed of the following: Motor: A Franklin Electric 4" Super Stainless Submersible Motor; rated 2 Horsepower with a service factor of 1.25 (1.0 for 50 Hz); thrust capacity of 650 pounds (1500 for Oil Stripper); RPM of 3450 (2875 for 50 Hz); corrosion resistant all stainless steel exterior construction; stainless steel splined shaft; hermetically-sealed windings; anti-track self healing resin system; water lubrication; filter check valve; Kingsbury-type thrust bearing; pressure equalized diaphragm; mechanical seal on 600M motors only and built-in lightning arrestor (all single phase, 200 & 230 volt, three phase). Contact the factory for specifics of the Sumoto 4" Motor. Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 14 AWG/3-wire (C.S.A. approved) lead with ground. Single Phase = 100 times per 24 hour period, Three Phase = 300 times per 24 hour period. Axial-Flow A discharge of 4" diameter with male threading, NPT standard. Storm - 21 Effective 02/2015

36 STANDARD 4" DISCHARGE STORM WATER MODELS SPECIFICATIONS: 3 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts Storm Water or Oil Stripper 13 o 4-Blade Impeller 17 o 4-Blade Impeller 23 o 4-Blade Impeller or or The pump shall be composed of the following: Motor: A Franklin Electric 4" Super Stainless Submersible Motor; rated 3 Horsepower with a service factor of 1.25 (1.0 for 50 Hz); thrust capacity of 900 pounds (1500 for Oil Stripper); RPM of 3450 (2875 for 50 Hz); corrosion resistant all stainless steel exterior construction; stainless steel splined shaft; hermetically-sealed windings; anti-track self healing resin system; water lubrication; filter check valve; Kingsbury-type thrust bearing; pressure equalized diaphragm; mechanical seal on 600M motors only and built-in lightning arrestor (all single phase, 200 & 230 volt, three phase). Contact the factory for specifics of the Sumoto 4" Motor. Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 14 AWG/3-wire (C.S.A. approved) lead with ground. Single Phase = 100 times per 24 hour period, Three Phase = 300 times per 24 hour period. Axial-Flow A discharge of 4" diameter with male threading, NPT standard. Storm - 22 Effective 02/2015

37 STANDARD 6" DISCHARGE STORM WATER MODELS PUMP SPECIFICATIONS: PUMP: < Axial-Flow/Lift < Stainless Steel construction < Stainless Steel impeller, investment casting, dynamically balanced DISCHARGE: < 6" Diameter < NPT standard threading, male 60 or 50 Hz SERVICE: < Single Phase or Three Phase IMPELLER: < Number 1: 5 or 7-1/2HP < Number 2: 5 or 7-1/2HP < Number 3: 5, 7-1/2 or 10HP < Number 4: 7-1/2 or 10HP < Number 4+: 10 or 15HP MOTOR: < Franklin Electric Super-6" Submersible < Thrust Capacity: 1500 pounds (5 & 7.5HP) < Thrust Capacity: 3500 pounds (10 & 15HP) < 3450 RPM (2875 for 50 Hz) < Corrosion-Resistant Construction < Double Flange Design < Stainless Steel Splined Shaft < Hermetically-Sealed Stator < Resin Encapsulated Windings < Stainless Steel Shell < Epoxy Coated End Frames < Filter Check Valve < Kingsbury-type Water Lubricated Thrust Bearing < Pressure-Equalized Diaphragm < Sand Fighter Slinger < Copper Bar Rotor < Available with or without Subtrol protection CYCLE CAPACITY: < up to 300 times per 24 hour period < See each HP page for specifics Storm - 23 Effective 02/2015

38 STANDARD 6" DISCHARGE STORM WATER MODELS VERTICAL PUMP ONLY Vertical Pump Only Dimensions (in inches) Voltage Weight (pounds) A-Height B-Minimum Submergence C-Overall Height 5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Storm - 24 Effective 02/2015

39 STANDARD 6" DISCHARGE STORM WATER MODELS VERTICAL PUMP WITH PVC SCREEN Dimensions (in inches) Voltage Weight (pounds) A- Overall Height B- Height C-Screen Height D-Minimum Submergence 5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: PVC Screens sold separately. See Accessories Section, page 1. Storm - 25 Effective 02/2015

40 STANDARD 6" DISCHARGE STORM WATER MODELS Recuperator Motor Bolts/ Lock Washers Impeller Bolt/ Lock Washer Impeller Pump Shell Cord Clamp/Tie Strap Motor Motor Lead Base Pads/ Spacer Blocks Base Pad Bolts/ Lock Washers AVAILABLE OPTIONS: < Control Panels, Standard or Delux and other options, see Accessories Section, page 36. < Variable Frequency Drives, see Accessories section, page 75. < Floats, 120/230 Volt DFD, see Accessories Section, page 9. < PVC Stainer Screens, see Accessories Section, page 1. < Pump Rings, see Accessories Section, page 4. < Motor Leads, see Accessories Section, page 5. < Lift Chain and Quick Links, see Accessories Section, page 7. < Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22. < Swing Check Valves, see Accessories Section, page 28. < Flap Valves and Gates, see Accessories Section, page 29. < Quick Disconnects, see Accessories Section, page 31. < Flexible Couplers, see Accessories Section, page 35. Storm - 26 Effective 02/2015

41 STANDARD 6" DISCHARGE STORM WATER MODELS HORIZONTAL PUMPS: Carry s Stainless Steel Axial Flow Submersible pumps are now available in a horizontal style. These pumps have the same components of the vertical pumps, ie. motor, lead, impeller, recuperator, control panels, floats etc. By placing the pumps on their side we have reduced the minimum submergence height. This means that the pump is able to pump closer to the bottom of the sump pit and can be placed in much shorter sumps. These pumps are available with a PVC intake horn, with a PVC strainer screen or with a plain intake. See the following diagrams. For more information about intake horns and strainer screens, see the Accessories section. Please note: horizontal pump motors typically have a shorter life expectancy than its vertical counterpart. Franklin submersible motors are designed primarily for operation in the vertical, shaft up position. During acceleration, the pump thrust increases as its output head increases. In cases where the pump head stays below its normal operation range during start-up and full speed conditions, the pump may create upward thrust. This creates upward thrust on the motor up thrust bearing. This is an acceptable operation for short periods at each start, but running continuously with upthrust will cause excessive wear on the upthrust bearing. As the mounting position of the motor becomes further from vertical and closer to horizontal, the probability of shortened thrust bearing life increases. For normal motor life expectancy in horizontal pumps, we have designed the pump with a slight rise using the feet of the pump to raise the discharge (shaft end) of the pump. Application should limit the starts to 10 within a 24 hour period. Storm - 27 Effective 02/2015

42 STANDARD 6" DISCHARGE STORM WATER MODELS HORIZONTAL PUMP ONLY Dimensions (in inches) Voltage Weight (pounds) A- Pump Height B-Discharge Midpoint C-Pump Length D-Overall Length 5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Storm - 28 Effective 02/2015

43 STANDARD 6" DISCHARGE STORM WATER MODELS HORIZONTAL PUMP WITH INTAKE HORN Dimensions (in inches) Voltage Weight (pounds) A- Height B-Discharge Midpoint C-Pump Length D-Overall Length 5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: PVC Intake Horns sold separately. See Accessories Section, page 4. Storm - 29 Effective 02/2015

44 STANDARD 6" DISCHARGE STORM WATER MODELS HORIZONTAL PUMP WITH PVC SCREEN Dimensions (in inches) Voltage Weight (pounds) A- Height B-Discharge Midpoint C-Screen Length D-Pump Length E-Overall Length 5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, or 575 Note: PVC Screens sold separately. See Accessories Section, page 1. Storm - 30 Effective 02/2015

45 STANDARD 6" DISCHARGE STORM WATER MODELS Pump Shell Motor Bolts/ Lock Washers Mounting Bracket Base Pads/Spacer Blocks Recuperator Impeller Base Pad Bolts/Lock Washers Cord Clamp/Tie Strap Impeller Bolt/ Lock Washer Motor Motor Lead AVAILABLE OPTIONS: < Control Panels, Standard or Delux and other options, see Accessories Section, page 36. < Variable Frequency Drives, see Accessories Section, page 75. < Floats, 120/230 Volt DFD, see Accessories Section, page 9. < PVC Strainer Screens, see Accessories Section, page 1. < PVC Intake Horns, see Accessories Section, page 4. < Motor Leads, see Accessories Section, page 5. < Lift Chain and Quick Links, see Accessories Section, page 7. < Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22. < Swing Check Valves, see Accessories Section, page 28. < Flap Valves and Gates, see Accessories Section, page 29. < Quick Disconnects, see Accessories Section, page 31. < Flexible Couplers, see Accessories Section, page 35. Storm - 31 Effective 02/2015

46 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 6" DISCHARGE STORM WATER MODELS PUMP MODEL # MOTOR MODEL # HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX. LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE* SUB- TROL CONTROL PANEL MODEL # FLOAT MODEL # X-31 or X-31H Y23.0 B14.3 R10.8 Y23.0 B14.3 R10.8 Y27.5 B17.4 R10.5 Y27.5 B17.4 R STD 10/3 W/G No SAND FIGHTER 10/3 W/G No STD 12/3 W/G No X-31 or X-31H SAND FIGHTER 12/3 W/G Yes STD 12/3 W/G No SAND FIGHTER 12/3 W/G Yes STD 14/3 W/G No X-31 or X-31H SAND FIGHTER 14/3 W/G Yes STD 14/3 W/G No SAND FIGHTER 14/3 W/G Yes * W/G indicates With Ground Wire. Storm - 32 Effective 02/2015

47 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 6" DISCHARGE STORM WATER MODELS PUMP MODEL # MOTOR MODEL # HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE* SUB- TROL CONTROL PANEL MODEL # FLOAT MODEL # X-31 or X-31H / / Y36.5 B34.4 R5.5 Y36.5 B34.4 R5.5 Y42.1 B40.5 R5.4 Y42.1 B40.5 R STD 8/3 W/G No SAND FIGHTER 8/3 W/G No / STD 10/3 W/G No X-31 or X-31H / SAND FIGHTER 10/3 W/G Yes / STD 10/3 W/G No / SAND FIGHTER 10/3 W/G Yes / STD 14/3 W/G No X-31 or X-31H / SAND FIGHTER 14/3 W/G Yes / STD 14/3 W/G No / SAND FIGHTER 14/3 W/G Yes * W/G indicates With Ground Wire. Storm - 33 Effective 02/2015

48 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 6" DISCHARGE STORM WATER MODELS PUMP MODEL # MOTOR MODEL # HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX. LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE* SUB- TROL CONTROL PANEL MODEL # FLOAT MODEL # X-31 or X-31H Y44.0 B39.5 R9.3 Y44.0 B39.5 R9.3 Y51.0 B47.5 R8.9 Y51.0 B47.5 R STD 6/3 W/G No SAND FIGHTER 6/3 W/G No STD 8/3 W/G No X-31 or X-31H SAND FIGHTER 8/3 W/G Yes STD 8/3 W/G No SAND FIGHTER 8/3 W/G Yes STD 12/3 W/G No X-31 or X-31H SAND FIGHTER 12/3 W/G Yes STD 12/3 W/G No * W/G indicates With Ground Wire. SAND FIGHTER 12/3 W/G Yes Storm - 34 Effective 02/2015

49 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 6" DISCHARGE STORM WATER MODELS PUMP MODEL # MOTOR MODEL # HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX. LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE* SUB- TROL CONTROL PANEL MODEL # FLOAT MODEL # X-31 or X-31H Y62.0 B52.0 R17.5 Y62.0 B52.0 R17.5 Y75.0 B62.5 Y16.9 Y75.0 B62.5 Y STD 4/3 W/G No SAND FIGHTER 4/3 W/G No STD 6/3 W/G No X-31 or X-31H SAND FIGHTER 6/3 W/G Yes STD 6/3 W/G No SAND FIGHTER 6/3 W/G Yes STD 10/3 W/G No X-31 or X-31H SAND FIGHTER STD 10/3 W/G 10/3 W/G Yes No SAND FIGHTER 10/3 W/G Yes * W/G indicates With Ground Wire. Storm - 35 Effective 02/2015

50 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 6" DISCHARGE STORM WATER MODELS 5 HORSE POWER PERFORMANCE CURVE Note: Impeller # 3 NOT recommended for fixed speed applications. Storm - 36 Effective 02/2015

51 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 6" DISCHARGE STORM WATER MODELS 7-1/2 HORSE POWER PERFORMANCE CURVE Storm - 37 Effective 02/2015

52 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 6" DISCHARGE STORM WATER MODELS 10 HORSE POWER PERFORMANCE CURVE Note: Impeller 4+ is NOT recommended for fixed speed applications. Storm - 38 Effective 02/2015

53 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE STANDARD 6" DISCHARGE STORM WATER MODELS 15 HORSE POWER PERFORMANCE CURVE Storm - 39 Effective 02/2015

54 STANDARD 6" DISCHARGE STORM WATER MODELS SINGLE PHASE CONTROL PANELS: Franklin Control Panels are reliable "Workhorses" for your commercial or agricultural installations. Start capacitors provide high torque start-ups, while motor matched run capacitors offer smooth, quiet, efficient motor operation. Manual reset overloads protect your motor and pumping equipment from abnormal conditions. Control Panels have a magnetic contactor and large terminal blocks. Note: Carry recommends the use of Franklin Electric single phase control panels with Carry single phase pumps and 3-wire motors. The start and run capacitors are housed in the control panel, not the motor. The pump will not operate without these capacitors. See Accessories Section, page 36 for more details on Single Phase Control Panels. THREE PHASE CONTROL PANELS: Carry designed Three Phase control panels feature NEMA 3R enclosures, IEC adjustable motor starters, disconnects, time delays, circuit breakers, transformers and switches. Franklin Three Phase control panels are simple and functional controls with NEMA 3R enclosures, main circuit breaker disconnects, universal transformers, contactors, overloads and Hand-Off-Auto switches. Carry Designed Panel Franklin Panel See Accessories Section, page 45 for more details on Three Phase Control Panels. VARIABLE FREQUENCY DRIVE PACKAGES: Carry has developed a package that includes a Variable Frequency Drive in a NEMA 4 fiberglass enclosure along with a pressure level transducer, flow sensor and lightning arrestor to operate in pumping applications. These packages allow you to achieve higher flow rates with lower horsepower and smaller sumps. These packages can be used with Single Phase or Three Phase input power to operate a Three Phase pump. See Accessories Section, page 75 for more details on Variable Frequency Drives and packages. 120/230 VOLT DFD FLOATS: DFD floats are used as a switch to operate the pump on and off with the water level in the pump pit. The floats have a pumping range of 1" to 48" and contain a heavy-duty mercury switch with a holding relay sealed inside one float. See the Accessories Section, page 9 for more details on DFD Floats. PVC STRAINER SCREENS: PVC Strainer Screens are available for vertical and horizontal pumps. They are designed to allow for water flow while restricting debris from reaching the pump. They are made of SDR35 PVC pipe and high density polyethylene for light weight durability. See the Accessories Section, page 1 for more details on PVC Strainer Screens. Storm - 40 Effective 02/2015

55 STANDARD 6" DISCHARGE STORM WATER MODELS SPECIFICATIONS: 5 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts Impeller No. 1 Impeller No. 3 Impeller No. 2 or The pump shall be composed of the following: Motor: Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Franklin Electric Super-6" Submersible Motor; rated 5 Horsepower with a service factor of 1.15 (1.0 for 3 PH, 380 V, 50 Hz); thrust capacity of 1500 pounds; RPM of 3450 (2875 for 3 PH, 380 V, 50 Hz); corrosion-resistant construction; double flange design; stainless steel shell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slinger; and copper bar rotor. A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 10 AWG/3-wire with ground motor lead or A 30' SEOW 12 AWG/3-wire with ground motor lead or A 30' SEOW 14 AWG/3-wire with ground motor lead. Single Phase = 100 times per 24 hour period, Three Phase = 300 times per 24 hour period. Axial-Flow A discharge of 6" diameter with male threading, NPT standard. Storm - 41 Effective 02/2015

56 STANDARD 6" DISCHARGE STORM WATER MODELS SPECIFICATIONS: 7-1/2 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts Impeller No. 1 or Impeller No. 2 or Impeller No. 3 or Impeller No. 4 The pump shall be composed of the following: Motor: Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Franklin Electric Super-6" Submersible Motor; rated 7-1/2 Horsepower with a service factor of 1.15 (1.0 for 3PH/308V/50Hz); thrust capacity of 1500 pounds; RPM of 3450 (2875 for 50 Hz); corrosion-resistant construction; double flanged design; stainless steel shell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slinger; and copper bar rotor. A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 8 AWG/3-wire with ground motor lead or A 30' SEOW 10 AWG/3-wire with ground motor lead or A 30' SEOW 14 AWG/3-wire with ground motor lead. Single Phase = 50 times per 24 hour period, Three Phase = 100 times per 24 hour period. Three Phase with a VFD = 200 times per 24 hour period. Axial-Flow A discharge of 6" diameter with male threading, NPT standard. Storm - 42 Effective 02/2015

57 STANDARD 6" DISCHARGE STORM WATER MODELS SPECIFICATIONS: 10 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts Impeller No. 3 or Impeller No. 4 or Impeller No. 4+ The pump shall be composed of the following: Motor: Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Franklin Electric Super-6" Submersible Motor; rated 10 Horsepower with a service factor of 1.15 (1.0 for 3PH/380V/50Hz); thrust capacity of 3500 pounds; RPM of 3450 (2875 for 50 Hz); corrosion-resistant construction; double flange design; stainless steel shell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressureequalizing diaphragm; sand fighter slinger and copper bar rotor. A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 6 AWG/3-wire with ground motor lead or A 30' SEOW 8 AWG/3-wire with ground motor lead or A 30' SEOW 12 AWG/3-wire with ground motor lead. Single Phase = 50 times per 24 hour period, Three Phase = 100 times per 24 hour period. Three Phase with a VFD = 200 times per 24 hour period. Axial-Flow A discharge of 6" diameter with male threading, NPT standard. Storm - 43 Effective 02/2015

58 STANDARD 6" DISCHARGE STORM WATER MODELS SPECIFICATIONS: 15 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts Impeller No. 4+ The pump shall be composed of the following: Motor: Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Franklin Electric Super-6" Submersible Motor; rated 15 Horsepower with a service factor of 1.15 (1.0 for 3PH/380V/50Hz); thrust capacity of 3500 pounds; RPM of 3450 (2875 for 50 Hz); corrosion-resistant construction; double flange design; stainless steel shell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressureequalizing diaphragm; sand fighter slinger and copper bar rotor. A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 4 AWG/3-wire with ground motor lead or A 30' SEOW 6 AWG/3-wire with ground motor lead or A 30' SEOW 10 AWG/3-wire with ground motor lead. Single Phase = 50 times per 24 hour period, Three Phase = 100 times per 24 hour period. Three Phase with a VFD = 200 times per 24 hour period. Axial-Flow A discharge of 6" diameter with male threading, NPT standard. Storm - 44 Effective 02/2015

59 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS PUMP SPECIFICATIONS: Carry Manufacturing is introducing the High Volume 6" CP06) Stainless Steel Axial Flow Submersible pumps for PUMP: < Axial-Flow/Lift < Stainless Steel construction < Stainless Steel impeller, investment casting, dynamically balanced DISCHARGE: < 6" Diameter < NPT standard threading, male 60 or 50 Hz SERVICE: < Single Phase or Three Phase IMPELLER: < 8.5E Impeller: 7-1/2HP < 10E Impeller: 7-1/2 or 10HP < 12E Impeller: 7-1/2, 10 or 15HP < 14E Impeller: 10 or 15HP < 18E Impeller: 10 or 15HP CYCLE CAPACITY: < up to 300 times per 24 hour period < See each HP page for specifics MOTOR: < Franklin Electric Super-6" Submersible < Thrust Capacity: 1500 pounds (7.5HP) < Thrust Capacity: 3500 pounds (10 & 15HP) < 3450 RPM (2875 for 50 Hz) < Corrosion-Resistant Construction < Double Flange Design < Stainless Steel Splined Shaft < Hermetically-Sealed Stator < Resin Encapsulated Windings < Stainless Steel Shell < Epoxy Coated End Frames < Filter Check Valve < Kingsbury-type Water Lubricated Thrust Bearing < Pressure-Equalized Diaphragm < Sand Fighter Slinger < Copper Bar Rotor < Available with or without Subtrol protection Storm - 45 Effective 02/2016

60 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS VERTICAL PUMP ONLY Dimensions (in inches) Voltage Weight (pounds) A-Height B-Minimum Submergence 7.5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Storm - 46 Effective 02/2016

61 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS VERTICAL PUMP WITH PVC SCREEN Dimensions (in inches) Voltage Weight (pounds) A- Height B-Minimum Submergence C- Screen Height 7.5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: PVC Screens sold separately. See Accessories Section, page 1. Storm - 47 Effective 02/2016

62 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS VERTICAL PUMP COMPONENTS: 1 Flange Bolt 2 O-Ring 3 Pump Shell 4 Spacer Block 5 Lock Washer 6 Recuperator 7 Impeller Bolt 8 Impeller 9 Motor Bolt 10 Motor Lock Washer 11 Motor 12 Base Pad 13 Base Pad Bolt AVAILABLE OPTIONS: < Control Panels, Standard or Delux and other options, see Accessories Section, page 36. < Variable Frequency Drives, see Accessories section, page 75. < Floats, 120/230 Volt DFD, see Accessories Section, page 9. < PVC Stainer Screens, see Accessories Section, page 1. < Pump Rings, see Accessories Section, page 4. < Motor Leads, see Accessories Section, page 5. < Lift Chain and Quick Links, see Accessories Section, page 7. < Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22. < Swing Check Valves, see Accessories Section, page 28. < Flap Valves and Gates, see Accessories Section, page 29. < Quick Disconnects, see Accessories Section, page 31. < Flexible Couplers, see Accessories Section, page 35. Storm - 48 Effective 02/2016

63 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS HORIZONTAL PUMPS: Carry s Stainless Steel Axial Flow Submersible pumps are also available in a horizontal style. These pumps have the same components of the vertical pumps, ie. motor, lead, impeller, recuperator, control panels, floats etc. By placing the pumps on their side we have reduced the minimum submergence height. This means that the pump is able to pump closer to the bottom of the sump pit and can be placed in much shorter sumps. These pumps are available with a PVC intake horn, with a PVC strainer screen or with a plain intake. See the following diagrams. For more information about intake horns and strainer screens, see the Accessories section. Please note: horizontal pump motors typically have a shorter life expectancy than its vertical counterpart. Franklin submersible motors are designed primarily for operation in the vertical, shaft up position. During acceleration, the pump thrust increases as its output head increases. In cases where the pump head stays below its normal operation range during start-up and full speed conditions, the pump may create upward thrust. This creates upward thrust on the motor up thrust bearing. This is an acceptable operation for short periods at each start, but running continuously with upthrust will cause excessive wear on the upthrust bearing. As the mounting position of the motor becomes further from vertical and closer to horizontal, the probability of shortened thrust bearing life increases. For normal motor life expectancy in horizontal pumps, we have designed the pump with a slight rise using the feet of the pump to raise the discharge (shaft end) of the pump. Application should limit the starts to 10 within a 24 hour period. Storm - 49 Effective 02/2016

64 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS HORIZONTAL PUMP ONLY Dimensions (in inches) Voltage Weight (pounds) E-Pump Length 7.5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Storm - 50 Effective 02/2016

65 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS HORIZONTAL PUMP WITH INTAKE HORN Dimensions (in inches) Voltage Weight (pounds) A-Pump Length 7.5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: PVC Intake Horns sold separately. See Accessories Section, page 4. Storm - 51 Effective 02/2016

66 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS HORIZONTAL PUMP WITH PVC SCREEN Dimensions (in inches) Voltage Weight (pounds) A-Screen Length B-Pump Length 7.5HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or HP/1PH HP/3PH 200, 230, 460 or Note: PVC Screens sold separately. See Accessories Section, page 1. Storm - 52 Effective 02/2016

67 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS HORIZONTAL PUMP COMPONENTS 1 Flange Bolt 2 Recuperator 3 Lock Washer 4 Impeller Bolt 5 Impeller 6 O-Ring 7 Motor Bolt 8 Motor Lock Washer 9 Motor 10 Base Pad Bolt 11 Front Base Pad 12 Rear Base Pad 13 Pump Shell AVAILABLE OPTIONS: < Control Panels, Standard or Delux and other options, see Accessories Section, page 36. < Variable Frequency Drives, see Accessories Section, page 75. < Floats, 120/230 Volt DFD, see Accessories Section, page 9. < PVC Strainer Screens, see Accessories Section, page 1. < PVC Intake Horns, see Accessories Section, page 4. < Motor Leads, see Accessories Section, page 5. < Lift Chain and Quick Links, see Accessories Section, page 7. < Schedule 40 PVC Pipe and Fittings, see Accessories Section, page 22. < Swing Check Valves, see Accessories Section, page 28. < Flap Valves and Gates, see Accessories Section, page 29. < Quick Disconnects, see Accessories Section, page 31. < Flexible Couplers, see Accessories Section, page 35. Storm - 53 Effective 02/2016

68 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS PUMP MODEL # MOTOR MODEL # HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE* SUB- TROL CONTROL PANEL MODEL # FLOAT MODEL # CP X / / Y36.5 B34.4 R5.5 Y36.5 B34.4 R5.5 Y42.1 B40.5 R5.4 Y42.1 B40.5 R STD 8/3 W/G No SAND FIGHTER 8/3 W/G No CP X / STD 10/3 W/G No / SAND FIGHTER 10/3 W/G Yes CP X / STD 10/3 W/G No / SAND FIGHTER 10/3 W/G Yes CP X / STD 14/3 W/G No / SAND FIGHTER 14/3 W/G Yes CP X / STD 14/3 W/G No / SAND FIGHTER 14/3 W/G Yes * W/G indicates With Ground Wire. Storm - 54 Effective 02/2016

69 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS PUMP MODEL # MOTOR MODEL # HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX. LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE* SUB- TROL CONTROL PANEL MODEL # FLOAT MODEL # CP X Y44.0 B39.5 R9.3 Y44.0 B39.5 R9.3 Y51.0 B47.5 R8.9 Y51.0 B47.5 R STD 6/3 W/G No SAND FIGHTER 6/3 W/G No CP X STD 8/3 W/G No SAND FIGHTER 8/3 W/G Yes CP X STD 8/3 W/G No SAND FIGHTER 8/3 W/G Yes CP X STD 10/3 W/G No SAND FIGHTER 10/3 W/G Yes CP X STD 10/3 W/G No * W/G indicates With Ground Wire SAND FIGHTER 10/3 W/G Yes Storm - 55 Effective 02/2016

70 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS PUMP MODEL # MOTOR MODEL # HP VOLTS PHASE SERVICE FACTOR FULL LOAD AMPS MAX. LOAD AMPS LOCKED ROTOR AMPS MOTOR CORD SIZE* SUB- TROL CONTROL PANEL MODEL # FLOAT MODEL # CP X Y62.0 B52.0 R17.5 Y62.0 B52.0 R17.5 Y75.0 B62.5 Y16.9 Y75.0 B62.5 Y STD 4/3 W/G No SAND FIGHTER 4/3 W/G No CP X STD 6/3 W/G No SAND FIGHTER 6/3 W/G Yes CP X STD 6/3 W/G No SAND FIGHTER 6/3 W/G Yes CP X STD SAND FIGHTER 10/3 W/G 10/3 W/G No Yes CP X STD SAND FIGHTER 10/3 W/G 10/3 W/G No Yes * W/G indicates With Ground Wire. Storm - 56 Effective 02/2016

71 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS 7-1/2 HORSE POWER PERFORMANCE CURVE Storm - 57 Effective 02/2016

72 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS 10 HORSE POWER PERFORMANCE CURVE Storm - 58 Effective 02/2016

73 STAINLESS STEEL AXIAL-FLOW SUBMERSIBLE HIGH VOLUME 6"(CP06) DISCHARGE STORM WATER MODELS 15 HORSE POWER PERFORMANCE CURVE Storm - 59 Effective 02/2016

74 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS SINGLE PHASE CONTROL PANELS: Franklin Control Panels are reliable "Workhorses" for your commercial or agricultural installations. Start capacitors provide high torque start-ups, while motor matched run capacitors offer smooth, quiet, efficient motor operation. Manual reset overloads protect your motor and pumping equipment from abnormal conditions. Control Panels have a magnetic contactor and large terminal blocks. Note: Carry recommends the use of Franklin Electric single phase control panels with Carry single phase pumps and 3-wire motors. The start and run capacitors are housed in the control panel, not the motor. The pump will not operate without these capacitors. See Accessories Section, page 36 for more details on Single Phase Control Panels. THREE PHASE CONTROL PANELS: Carry designed Three Phase control panels feature NEMA 3R enclosures, IEC adjustable motor starters, disconnects, time delays, circuit breakers, transformers and switches. Franklin Three Phase control panels are simple and functional controls with NEMA 3R enclosures, main circuit breaker disconnects, universal transformers, contactors, overloads and Hand-Off-Auto switches. Carry Designed Panel Franklin Panel See Accessories Section, page 45 for more details on Three Phase Control Panels. VARIABLE FREQUENCY DRIVE PACKAGES: Carry has developed a package that includes a Variable Frequency Drive in a NEMA 4 fiberglass enclosure along with a pressure level transducer, flow sensor and lightning arrestor to operate in pumping applications. These packages allow you to achieve higher flow rates with lower horsepower and smaller sumps. These packages can be used with Single Phase or Three Phase input power to operate a Three Phase pump. See Accessories Section, page 75 for more details on Variable Frequency Drives and packages. 120/230 VOLT DFD FLOATS: DFD floats are used as a switch to operate the pump on and off with the water level in the pump pit. The floats have a pumping range of 1" to 48" and contain a heavy-duty mercury switch with a holding relay sealed inside one float. See the Accessories Section, page 9 for more details on DFD Floats. PVC STRAINER SCREENS: PVC Strainer Screens are available for vertical and horizontal pumps. They are designed to allow for water flow while restricting debris from reaching the pump. They are made of SDR35 PVC pipe and high density polyethylene for light weight durability. See the Accessories Section, page 1 for more details on PVC Strainer Screens. Storm - 60 Effective 02/2016

75 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS SPECIFICATIONS: 7-1/2 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts 8.5E Impeller or 10E Impeller or 12E Impeller The pump shall be composed of the following: Motor: Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Franklin Electric Super-6" Submersible Motor; rated 7-1/2 Horsepower with a service factor of 1.15 (1.0 for 3PH/308V/50Hz); thrust capacity of 1500 pounds; RPM of 3450 (2875 for 50 Hz); corrosion-resistant construction; double flanged design; stainless steel shell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slinger; and copper bar rotor. A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 8 AWG/3-wire with ground motor lead or A 30' SEOW 10 AWG/3-wire with ground motor lead. Single Phase = 50 times per 24 hour period, Three Phase = 100 times per 24 hour period. Three Phase with a VFD = 200 times per 24 hour period. Axial-Flow A discharge of 6" diameter with male threading, NPT standard. Storm - 61 Effective 02/2016

76 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS SPECIFICATIONS: 10 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts 10E Impeller or 12E Impeller or 14E Impeller or 18E Impeller The pump shall be composed of the following: Motor: Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Franklin Electric Super-6" Submersible Motor; rated 10 Horsepower with a service factor of 1.15 (1.0 for 3PH/380V/50Hz); thrust capacity of 3500 pounds; RPM of 3450 (2875 for 50 Hz); corrosion-resistant construction; double flange design; stainless steel shell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsburytype water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slinger and copper bar rotor. A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 6 AWG/3-wire with ground motor lead or A 30' SEOW 8 AWG/3-wire with ground motor lead or A 30' SEOW 10 AWG/3-wire with ground motor lead. Single Phase = 50 times per 24 hour period, Three Phase = 100 times per 24 hour period. Three Phase with a VFD = 200 times per 24 hour period. Axial-Flow A discharge of 6" diameter with male threading, NPT standard. Storm - 62 Effective 02/2016

77 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS SPECIFICATIONS: 15 Horsepower Single Phase or Three Phase 50 Hertz or 60 Hertz 200 Volts or 230 Volts or 460 Volts or 575 Volts 12E Impeller or 14E Impeller or 18E Impeller The pump shall be composed of the following: Motor: Pump Shell: Impeller: Fasteners: Base Pads: Lead: Cycle Capacity: Lift: Discharge: A Franklin Electric Super-6" Submersible Motor; rated 15 Horsepower with a service factor of 1.15 (1.0 for 3PH/380V/50Hz); thrust capacity of 3500 pounds; RPM of 3450 (2875 for 50 Hz); corrosion-resistant construction; double flange design; stainless steel shell; epoxy coated end frames; stainless steel splined shaft; hermetically-sealed stator; resin encapsulated windings; filter check valve; Kingsbury-type water lubricated thrust bearing; pressure-equalizing diaphragm; sand fighter slinger and copper bar rotor. A Schedule stainless steel shell with 303 stainless steel investment casted base and crown, and a 303 stainless steel investment cast recuperator that is CNC precision machined; all components are assembled using a controlled welding process. A 303 stainless steel investment cast impeller; CNC precision machined and dynamically balanced. All stainless steel hex head bolts, nuts and washers. Buna Urethane Rubber with a durometer of 80 and molded stainless steel washer inserts. A 30' SEOW 4 AWG/3-wire with ground motor lead or A 30' SEOW 6 AWG/3-wire with ground motor lead or A 30' SEOW 10 AWG/3-wire with ground motor lead. Single Phase = 50 times per 24 hour period, Three Phase = 100 times per 24 hour period. Three Phase with a VFD = 200 times per 24 hour period. Axial-Flow A discharge of 6" diameter with male threading, NPT standard. Storm - 63 Effective 02/2016

78 HIGH VOLUME 6" (CP06) DISCHARGE STORM WATER MODELS This page intentionally left blank. Storm - 64 Effective 02/2016

79 HIGH VOLUME 8" (CP08) DISCHARGE STORM WATER MODELS PUMP SPECIFICATIONS: Carry Manufacturing is introducing the High Volume 8" (CP08) Stainless Steel Axial Flow Submersible Pumps for The pumps are available in the vertical style only at this time. Future enhancements will include strainer screens and horizontal models. If you need additional information, please contact the factory. PUMP: < Axial-Flow/Lift < Stainless Steel construction < Stainless Steel impeller, investment casting, dynamically balanced DISCHARGE: < 8" Diameter < NPT standard threading, male 60 or 50 Hz SERVICE: < Three Phase IMPELLER: < 10E Impeller: 20HP < 13E Impeller: 20 or 25HP < 16E Impeller: 20 or 25HP CYCLE CAPACITY: < up to 300 times per 24 hour period < See each HP page for specifics MOTOR: < Franklin Electric Super-6" Submersible < Thrust Capacity: 3500 pounds < 3450 RPM (2875 for 50 Hz) < Corrosion-Resistant Construction < Double Flange Design < Stainless Steel Splined Shaft < Hermetically-Sealed Stator < Resin Encapsulated Windings < Stainless Steel Shell < Epoxy Coated End Frames < Filter Check Valve < Kingsbury-type Water Lubricated Thrust Bearing < Pressure-Equalized Diaphragm < Sand Fighter Slinger < Copper Bar Rotor < Available with or without Subtrol protection Storm - 65 Effective 02/2016