2017 Product Catalog.

Transcription

1 2017 Product Catalog

2 Your Off-Grid Partner Phocos passion is off-grid. Our mission is to deliver high-quality, off-grid power solutions that maximize system reliability and minimize total cost of ownership for both our clients and end users. With millions of products in service worldwide, we offer a wide variety of solutions that have been used to bring light and electricity to some of the most remote places on Earth. Our roots are tied deeply in rural electrification applications throughout the developing world. We built our off-grid reputation by supplying high-quality energy solutions to markets throughout regions where a huge population do not have access to reliable grid power. Phocos has emphasized the development of intelligent, reliable products and solutions for rural electrification applications that incorporate the latest technology advances at the most affordable cost. Over time, our product portfolio and expertise have expanded to serve various industrial off-grid applications as well. Phocos solutions help ensure that reliable energy is available for all types of industrial applications and equipment. From solar lighting to oil and gas, traffic/security to telecom, we pride ourselves with meeting the high demands of any industrial off-grid application precisely with the right solution for the job Contents Contents/Your Off Grid Partner MPPT Charge Controllers PWM Charge Controllers Off-Grid Inverters DC Lighting & Refrigeration Turnkey Solutions Wire Gauge Recommendations for Solar Installations MPPT Charge Controllers CXN-MPPT MPPT 230/100 CIS-MPPT MPPT 100/40 CML-MPPT PWM Charge Controllers ECO-N-T CXNup CIS-N CMLup CMLsolid CIS-N-LED ECO CM Dingo SPS

3 There is a growing demand for off-grid solutions for recreation activities like boats, cabins, RVs and camping. In such applications, energy independence is not only a necessity, but it is a way of life. Phocos is dedicated to developing solutions to support clean, sustainable living on the road, on the water or off the beaten path. Phocos recreational solutions make living responsibly easier than ever before with optimized user experience. Phocos is headquartered in Ulm, Germany. However, Phocos global presence reaches far beyond its German origins. Today, we operate 13 sales, support and R&D subsidiaries in all major continents and markets on Earth. Our commitment to local service and support anywhere in the world makes Phocos much more than a supplier of components and solutions for off-grid systems. It makes us Your Off-grid Partner. We look forward to having the opportunity of working with you! Sincerely, The Phocos Global Network Off-Grid Inverters DC Lighting & Refrigeration Turnkey Solutions GP-IC Inverter/Charger GP-SW Series Pure Sine Inverters GP Series Modified Sine Inverters SL-BY LED Lamps SFL LED Lamps CFL Lamps FR Series Refrigerator/Freezer LS LiFePO4 Solar Home Systems Mini Pico Lamp Kit Pico Lamp Kit P-Box/Ebox

4 MPPT Charge Controllers

5

6 CXN-MPPT Versatile MPPT Solar Charge Controller with LCD Display Technical Drawing x

7 MPPT Charge Controllers Protection Functions Phocos CXN-MPPT is an excelllent choice for mid-sized PV charging systems that require maximum charging efficiency in any environmental conditions. Equipped with innovative Maximum Power Point Tracking (MPPT) regulation, CXN-MPPT is capable of charging 12V, 24V or 48V batteries with PV arrays up to 150Voc. This makes CXN-MPPT great for off-grid PV arrays uilitizing 36-cell, 60-cell and 72-cell panels alike. Low voltage disconnect Overvoltage disconnect Undervoltage disconnect Short circuit disconnect Reverse polarity protection Over-temperature protection The built-in, backlit LCD screen displays both real-time and historical system data. Up to 2 years of historical system data can be accessed via the MXI/MXI-232 accessory and CXLink software. Product Features Application Example Suitable for 12/24/48V systems up to 3KW Up to 150V PV input Innovative MPPT algorithm delivers up to 98% power conversion efficiency. Up to 30% more charging power than conventional PWM controllers 2 years of system datalogging Programmable charging for Lead Acid and LiFePO4 batteries Backlit LCD display & 7-LED system status indicators Powerful software tool (CXLink) for programming UL1741 and C22.2 No and CE certification (Pending) CXN-MPPT MXI Inverter TV Technical Data Type CXN-MPPT-150/35 CXN-MPPT-150/50 System voltage 12/24/48V Max. charge/load current 35A 50A Max PV Input Power: 500W/1000W/2000W 750W/1500W/3000W Float charge 13.8/27.6 V (25 C) Main charge 14.4/28.8 V (25 c), 0.5 h (daily) Boost charge 14.4/28.8 V (25 C), for 2 h; Activation: battery voltage < 12.3/24.6 V Equalization charge 14.8/29.6 V (25 C), for 2 h; Activation: battery voltage < 12.1/24.2 V Max Panel/Array Voltage 150 Voc Deep discharge protection: LVD: 11-12V (12V System), 22-24V (24V System), 44-48V (48V System) Cut-off voltage Reconnect level 12.8V (12V system)/25.6v (24V system)/51.2v (48V system) Temperature compensation -5mV/K/cell Battery type Lead acid (GEL, AGM, flooded), LiFePO4 on request Grounding Negative Grounded Ambient temperature -4 to +140deg F (-20 to +60deg C) with derating over +122deg F (+50deg C) Max. wire cross section 0 AWG/50mm 2 Weight 3 lbs (1.36kg) Dimensions (W x H x D) 167 x 150 x 52 mm Certifications CE, UL1741 (Pending), IEC (Pending) Warranty 5 years 7

8 MPPTsolid 230/100 High-Power MPPT Solar Charge Controller Technical Drawing

9 MPPT Charge Controllers The MPPTsolid charge controller provides up to 100A of charging power into battery banks between 24 to 72V from solar panel arrays up to 230V open circuit. Our patented MPPT (Maximum Power Point Tracking) algorithm maximizes the power output of the solar array. MPPTsolid allows the use of a higher voltage PV arrays than the batteries being charged as it is designed to step down the array voltage, allowing greater flexibility in the choice of array of wiring configurations. A PC communication port and software allow viewing and programming the MPPTsolid s parameters as well as data logging. A battery temperature sensor (supplied) enables programmable temperature compensation of charging voltage. Product Features Protection Functions Patented MPPT design Short circuit protection (Maximum Power Point Overcurrent protection Tracking) Adjustable 3-stage charging algorithm 230V open circuit input capable Up to 100 A output current 97% efficiency at 100A out Input and output current sensor Low noise, EMC tested Battery temperature sensor included 24-72VDC nominal battery voltages (programmable through PC interface) UL1741/CSA107/CE/IEC approved Optional digital display Technical Data Type MPPTsolid 230/100 System voltage 24/28/36/48/60/72V Max solar input voltage 230 Voc Max. input current 100A Input protection No internal fuse, 100 A in-line input circuit breaker recommended Max. output current 100A Output protection No internal output fuse, 100 A in-line input circuit breaker recommended Output voltage range User programmable V via RS232 PC-interface Battery voltage range V (specify battery voltage when ordering) Charge type 3 stage: float, main, boost PV maximum power voltage (Vmp) > Battery voltage x 1.25 (ie. Vmp > 30 V for 24 V battery) Power conversion efficiency Up to 97% Idle self-consumption 3 W max. Grounding No common grounding. Connect earth to corresponding terminal Operating temperature range -13 to +131deg F (-25 to +55deg C) with derating over +104deg F (+40deg C) Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded) Battery temperature compensation User programmable (mv/k) Status display Green LED (operation), RS232- PC interface Data logging Via RS232 PC-interface: PC data logging software included Certifications / compliance UL1741, CSA107.1 and CE Ruggedization options Call for options Conduit connections 4x1 inch conduit connections Connections Four contact terminals, AWG 1/0 maximum gage, other possible options Material Anodized marine grade aluminum Finish Orange anodized Fastenings All 18-8 stainless steel Dimensions (WxHxD) 208 x 89 x 434 mm Clearance 1 inch (25 mm) all around Weight 20.4 lb / 9.25 kg Type of protection IP20 Warranty 3 years MPPTsolid stand-alone 9

10 CIS-MPPT Series Industrial MPPT Charge Controllers with Optional Lighting Control Product Family CIS-MPPT-50/10 Single load output Positive grounded Auto recognition of system voltage 12/24 V Max. charge current: 10 A Nightlight function Datalogger CIS-MPPT-85/20 Single load output Negative grounded Auto recognition of system voltage 12/24 V Max. charge current: 20 A Nightlight function Datalogger CIS-CU, CIS-CU-LCD Infrared remote control Programming accessory MXI-IR Interface for CIS communication with computer USB and IR interface MXI-IR Technical Drawing CIS-CU-LCD CIS-CU CIS-MPPT (20 A) 88.5 CIS-MPPT (10 A) CISCOM Software 10

11 MPPT Charge Controllers Off-grid PV systems exposed to extreme weather/environmental conditions impose increased risk of damage to the power electronics. In order to assure reliable battery protection under such conditions, Phocos developed a fully-encapsulated MPPT charge controller range to prevent corrosion: The CIS-MPPT Series solar charge controllers. Product Features Infrared-programmable load timing feature with dimming ideal for lighting systems 2 year log of system performance data accessible via MXI-IR accessory, PC software (CISCOM) Up to 98% power conversion efficiency 3-stage I/V curve sweep algorithm increases battery lifespan Anodized aluminum extrusion with built-in heat dissipation Fully encapsulated design prevents damage from corrosion, insects and/or dust. Works in 12 or 24V battery systems (automatic battery voltage detection) Compatible with 60-cell modules Technical Data Protection Functions Low voltage disconnect function: LVD or SOC are available Overvoltage disconnect function: Disconnects loads when battery voltage reaches 15.5V in 12V system and 31V in 24V system Undervoltage disconnect function: Disconnects loads when battery voltage falls below 10.5V in 12V system and 21V in 24V system Short circuit disconnect function: When the load current is >300% nominal current, controller will disconnect loads immediately Reverse polarity protection/over-temperature protection Power+ Current Limiting Feature allows oversizing PV power by up to 50% during winter months. Application Examples ROAD WORK AHEAD Solar Streetlight Message Board Security/Surveillance Type CIS-MPPT-50/10 CIS-MPPT-85/20 System voltage 12/24 V auto recognition Max. charge/load current 10A 20A Max PV Power Input 125/250W 250/500W Float charge 13.8/27.6 V (25 C) Main charge 14.4/28.8V (25 c), 0.5 h (daily) Boost charge 14.4/28.8V (25 C), for 2 h; Activation: battery voltage < 12.3/24.6V Equalization charge 14.8/29.6V (25 C), for 2 h; Activation: battery voltage < 12.1/24.2V Max. panel voltage 50V 85V Idle self-consumption <10 ma 15 ma (12V), 8 ma (24V) Deep discharge protection: Cut-off voltage Reconnect level Dimming value Temperature compensation Battery type LVD: V (12V system); V (24V system) SOC: V (12V system); V (24V system) 12.8V (12V system)/25.6v (24V system) % output power -25mV/K at 12V; -50 mv/k at 24V Lead acid (GEL, AGM, flooded), LiFePO4 on request Grounding Positive grounded Negative grounded Ambient temperature -40 to +122deg F (-40 to +60deg C) Weight 1.38 lbs (360g) 2.31 lbs (625g) Dimensions (W x H x D) 88.5 x 112 x 41.4 mm 130 x 150 x 45 mm Type of protection IP 68 (1.5m, 72 h) Certification CE Warranty 5 Years 11

12 MPPT Charge Controllers MPPT 100/40 (40A) Modular MPPT Charge Controller Technical Drawing Product Family With innovative maximum power point tracking technology, Phocos MPPT 100/40 ensures optimal performance from the solar array at all times and in all weather conditions. Innovative MPPT charging can yield an energy gain from your PV array of up to 30%. The temperature-compensated three-stage I/V curve charge algorithm significantly extends the lifespan of the battery. Power+ current limiting allows for over-sizing PV power by up to 50% for winter months. Product Features and Functions Thermal overload protection and temperature compensation Equipped with a short circuit disconnect function Works in 12 or 24V systems Use as a stand alone 40A controller or part of modular system Faster recharging by converting excess PV voltage to charge current Highest charging efficiency in low irradiation conditions MCU Modular Central Unit System voltage 12/24/48V selectable MPS Modular Power Switch Auto recognition of system voltage 12/24/48V Max. charge current: 45/80A versions MXI Interface for communication with computer USB interface MODCOM Application software for MCU communication with computer Technical Data Type System voltage Nominal charge current Max. battery charge current Float charge MCS Modular Current Sensor System voltage 12/24/48V RS485 socket Current measurement range 50/100/200/400/800A MTS External temp. sensor for MCU MRD Remote display for MCU Displays panel current, load current and battery voltage, Ah, SOC, etc. MXI 232 Interface for MCU RS232 interface communication with computer MPPT 100/40 (40A) 12/24 V auto recognition 40A 41A 13.8/27.6V (25 C) Main charge 14.4V/28.8V (25 C), 0.5 h (daily) Boost charge / activation 14.4/28.8V (25 C), 2 h / battery voltage < 12.3/24.6V Equalization charge / activation 14.8/29.6V (25 C), 2 h / battery voltage < 12.1/24.2V Max. battery voltage 32V Max. PV voltage 95V Min. PV voltage 17/34V Max. PV input power 600W at 12V, 1200W at 24V Standby power consumption < 30 mw at 12 V system voltage (< 2 ma) < 80 mw at 24 V system voltage (< 3 ma) Temperature compensation -25 mv/k at 12V; -50 mv/k at 24V Power conversion efficiency Up to 98% Grounding Negative grounded Ambient temperature -40 to +113deg F (-40 to +45deg C) Battery type Lead acid (GEL, AGM, flooded) Wire cross section AWG 2/ 33mm 2 Dimensions (W x H x D) 185 x 150 x 115 mm Weight 3.5 lbs (1.6kg) Type of protection IP20 Warranty 2 Years 12

13 CML-MPPT (10 A) Intuitive MPPT Controller w/ USB Charging MPPT Charge Controllers Technical Drawing Technical Data The CML-MPPT charge controller is equipped with a number of outstanding features such as charge status indication, low voltage disconnect alarm and safety functions. A user-friendly MPPT charge controller, the CML-MPPT also includes a built-in USB charging port for charging mobile devices from a larger off-grid solar system. Product Features and Functions LED status indication of the battery s charge level Optional acoustic battery status alarm 3-stage I/V curve sweep algorithm increases battery lifespan Temperature-compensated charging for sealed or vented lead acid batteries Works in 12 or 24V systems (automatic battery voltage detection) Available USB charging port allows charging portable devices from PV system Type CMLmppt 10 System voltage 12/24V auto recognition Max. charge/load current 10 A Float charge 13.8/27.6V (25 C) Main charge 14.4/28.8V (25 C), 0.5 h (daily) Boost charge 14.4/28.8V (25 C), for 2 h Activation: battery voltage < 12.3/24.6V Equalization charge 14.8/29.6V (25 C), for 2 h Activation: battery voltage < 12.1/24.2V Deep discharge protection: Sate-of-charge dependent Voltage dependent Reconnect level Overvoltage protection Undervoltage protection Max. panel voltage (Overvoltage protection) Max. panel power Temperature compensation Idle self-consumption Grounding V / 22.8V 23.8V 11.0 / 22V 12.8/25.6V 15.5/31.0V 10.5/21.0V 42V in 12V system 50V in 24V system 150W (12 V system), 300W (24V system) -25 mv/k at 12V -50 mv/k at 24V < 10 ma Positive grounded Ambient temperature -40 to +122deg F (-40 to +50deg C) Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded) USB port 5.0V; 800 ma Wire cross section AWG 6/16mm 2 Dimensions (W x H x D) 127 x 126 x 38 mm Weight.71 lbs (320g) Type of protection IP20 Warranty 2 Years 13

14 PWM Charge Controllers

15

16 ECO-N-T Series Solar Charge Controller Technical Drawing ECO-N-T

17 PWM Charge Controllers Phocos ECO-N-T is the answer for any tough solar project. Its small size makes it perfect to fit well in tricky places. ECO-N-T is fully encapsulated with IP68 standard casing which means it can handle harsh environments. The ECO-N-T charge controller is versatile and offers the flexibilty of operating with 12 or 24V systems. It will also protect your batteries from overcharging and over discharging. Product Features Ideal for almost any off-grid PV application Same model can be used in 12 or 24V systems (fewer components to stock) Fully potted PCB Rugged housing with corrosion-resistant screw terminals Easy-to-understand 3-LED system status interface Install only requires a flathead screwdriver UL1741/Class I Div. 2 Certified Protection Functions Low voltage disconnect function: Disconnects loads when battery voltage is 11.0V Overvoltage disconnect function Overcurrent disconnect function Short circuit disconnect function Reverse polarity protection Overload protection Technical Data ECO-N-T Type ECO-N-10-T ECO-N-20-T System voltage 12/24V (auto recognition) Max charge/load current 10A 20A Float charge 13.8V/27.6V (25degC) Main charge 14.4V/28.8V (25degC) 30 min daily Boost charge 14.4V/28.8V (25degC), 2 hrs Activation: <12.3/24.6V Deep discharge protection 11.0/22.0V Cut-off voltage Overvoltage protection 15.5/31.0V Undervoltage protection 10.5/21.0V Max. PV panel voltage 30V (12V system)/ 50V (24V System) Temperature compensation -25mV/K at 12V; -50 mv/k at 24V Idle self-consumption 4 ma Grounding Negative grounded Ambient temperature -40 to +140deg F (-40 to +60deg C) Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded) Max Wire cross section AWG 8/10mm 2 Dimensions (W x H x D) 100 x 61 x 20 mm Weight.35 lbs (160g) Type of protection IP68 (case), IP21 (terminals) Certifications CE, UL1741, ANSI/ISA Class I Div. 2 Locations (Groups A-D) Warranty 5 Years Application Examples The CIS-N is NRTL certified Hazardous Locations (HazLoc) tested according to: ANSI/ISA , Class I Division 2 (Groups A-D). Ordinary Locations (OrdLoc) tested according to: UL1741:2005 CAN/CSA C22.2 No Security/Surveillance Traffic 17

18 CXNup Series Solar Charge Controller with Datalogging/LCD Display Technical Drawing 18

19 PWM Charge Controllers The CXNup series is a highly intelligent charge controller family for a wide range of applications. It features an intuitive user interface and stores up to two (2) years of valuable system performance data which is accessible via Phocos CXLink software. Real-time battery voltage, SOC %, charge and load current, and system status are clearly displayed on the large, backlit LCD display. Optional acoustic battery alarms and a programmable solar lighting function are also standard. Product Family Product Features Prepared for 12 or 24V battery charging Suitable for charging systems up to 1.4kW 2 years datalogging Corrosion-resistant, set screw type wire terminals Long-lasting, capacitive touch-sensor buttons eliminate mechanical button failures Application Examples MXI and MXI-232 Interface for CXNup controller communication with computer via USB or RS232 interface Protection Functions Deep discharge protection: / V current adapted (SOC) / V independent from current Overvoltage disconnect function: Disconnects loads when battery voltage is >15.5V in 12V system, >31V in 24V system Undervoltage disconnect function: Disconnects loads when battery voltage is <10.5V in 12V system, <21V in 24V system Overcurrent disconnect function Short circuit disconnect function Reverse polarity protection Over-temperature protection Technical Data Type CXNup10 CXNup20 CXNup40 System voltage 12/24V auto recognition Max. charge/load current 10A 20A 40A Float charge 13.7/27.4V (25 C) Main charge 14.4/28.8V (25 c), 0.5 h (daily) Boost charge 14.4/28.8V (25 C), for 2 h Activation: battery voltage < 12.3/24.6V Equalization charge 14.8/29.6 V (25 C), for 2 h Activation: battery voltage < 12.1/24.2V Deep discharge protection: Cut-off voltage Reconnect level Overvoltage protection Undervoltage protection Max. panel voltage (Surge protection by varistor) Temperature compensation Idle self-consumption Grounding / V current adapted (SOC) / V independent from current 12.8/25.6V 15.5/31.0V 10.5/21.0V 30V in 12V system 50V in 24V system -25mV/K at 12V; -50 mv/k at 24V < 4 ma Negative grounded Ambient temperature -40 to +122deg F (-40 to +50deg C) Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded), LiFePO4 (on request) Datalogger 2 Years USB charging port 5.0V; 1.5A External temperature sensor Yes Wire cross section AWG 6/16mm 2 Weight.37 lbs (168g).39 lbs (179g) Dimensions (W x H x D) 101mm x 103mm x 32mm Type of protection IP22 Warranty 2 Years CXNup Mobile charging TV NTC MXI CXLink 19

20 CXNsolid (50 A) Programmable Solar Charge Controller Technical Drawing x

21 PWM Charge Controllers The CXNsolid is a programmable PWM solar charge controller for the toughest industrial applications. At 50A max charge/load current, CXNsolid is suitable for PV systems up to 3.5 kw. CXNsolid can be easily paired with the Go Power! GP-SW Pure Sine Wave In (GP-SW-1000, GP-SW-2000, GP-SW-3000). The battery state of charge is clearly displayed using an LED bar graph. The deep discharge protection function can be set to up to 2 different modes: voltage-controlled or SOC-controlled. Acoustic warnings (e. g. load-disconnect) are built-in. Product Family Product Features Multifunction LCD display shows system status User friendly configuration interface with keys LEDs display the battery state of charge Flexible load disconnect algorithms Temperature-compensated four-stage PWM series charging regulation Automatic 12/24/48V detection External temperature sensor Remote output terminal for the Phocos inverter series Optional USB interface (MXI + CXLink) Aluminum housing (IP20) Datalogger (2 years) MXI USB and MXI 232 Interface for CXNsolid controller communication with computer via USB or RS232 interface Protection Functions Overvoltage disconnect function: Disconnects loads when battery voltage is > 15.5 V in 12V system and > 31 V in 24V system Deep discharger protection: / / V current adapted (SOC) / / V independent from current Undervoltage disconnect function: Disconnects loads immediatelly when battery voltage is < 10.5V in 12V system, < 21V in 24V system and < 42V in 48V system Overcurrent disconnect function Short circuit disconnect function Reverse polarity protection Over-temperature protection Technical Data Type CXNsolid 50 System voltage 12/24/48V, auto recognition Max. charge/load current 50 A Float charge 13.8/27.6/55.2V (25 C) Main charge 14.4/28.8/57.6V (25 c), 0.5 h (daily) Boost charge 14.4/28.8/57.6V (25 C), for 2 h Activation: battery voltage < 12.3/24.6/49.2V Equalization charge 14.8/29.6/59.2V (25 C), for 2 h Activation: battery voltage < 12.1/24.2/48.4V Deep discharge protection / / V current adapted (SOC) / / V independent from current Load disconnect voltage Reconnect level 12.8/25.6/51.2V Overvoltage protection 15.5/31.0/62.0V Undervoltage protection 10.5/21.0/42.0V Max. panel voltage 30 V (12V system); 50 V (24V system); 100 V (48V system) Temperature compensation -25mV/K at 12 V; -50 mv/k at 24V; -100 mv/k at 48V Remote control Yes (GP-SW-1000, GP-SW-2000, GP-SW-3000) for Go Power! GP-SW Inverters Idle self-consumption < 15 ma Grounding Negative grounded Ambient operating -4 to +122deg F (-20 to +50degC) temperature Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded) Datalogger 2 Years Max. wire cross section Up to 50 mm 2 Dimensions (W x H x D) 167 x 150 x 52 mm Weight 2.2 lbs (1kg) Type of protection IP20 Warranty 2 Years Application Examples CXNsolid MXI Inverter TV 21

22 PWM Charge Controllers CIS-N-LED (10-20A) Solar Charge Controllers with integrated LED Driver and Timer, and Input for Motion Sensor Technical Drawing 22 The CIS-N-LED is a 3-in-1 solution that increases lifetime, reliability, efficiency and cost effectiveness. It is the perfect charge controller for solar lighting applications such as streetlights or bus shelters, and its motion detection capabilities regulate LED brightness to conserve energy. To further conserve energy and extend the system s lifetime, the CIS-N-LED has two low voltage disconnect levels. The levels can be programmed using one of Phocos handheld remote control accessories: CIS-CU/CIS-CU-LCD or the MXI-IR USB device and our free CISCOM PC software. Product Family CIS-CU, CIS-CU-LCD Infrared remote control programming accessory MXI-IR Interface for CIS communication with computer USB and IR interface Product Features and Functions Combines three functions in one: charge controller + flexible timer + LED drivers Developed especially for rough environments, solar LED lamps, and solar LED streetlights Fully protected by the encapsulated case (protection class IP68): increased lifetime and reliability, reduced costs Flexible dimming functions Auto-protect function: two voltage disconnects extend system operation time and reliability Small size: fits everywhere True color PWM dimming Input for motion sensor Technical Data Type CIS-N-LED 350 ma CIS-N-LED 600 ma CIS-N-LED 700 ma CIS-N-LED 1050 ma CIS-N-LED 1400 ma System voltage 12/24V auto recognition Max. charge current 10 A (15A, 50 C*) 20 A (30A, 50 C*) Float charge 13.8/27.6V (25 C) Main charge 14.4/28.8V (25 C), 0.5 h (daily) Boost charge 14.4/28.8V (25 C), 2 h Activation: battery voltage < 12.3/24.6V Equalization charge 14.8/29.6V (25 C), 2 h Activation: battery voltage < 12.1/24.2V (at least every 30 days) Deep discharge protection: Cut-off voltage Reconnect level Overvoltage protection Undervoltage protection Max. panel voltage Temperature compensation Idle self-consumption Grounding Ambient temperature / V by SOC / V by voltage (adjustable step 0.1/0.2V) 12.8/25.6V 15.5/31.0V 10.5/21.0V 50 V -25 mv/k at 12V -50 mv/k at 24V 5 8 ma Negative grounded -40 to +140degF (-40 to +60degC) Absolute max. device temp. +85 C Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded), LiFePO4 (on request) Adjustment range: 0 15 h / 0 14 h Evening/morning hours timer Night/day detection V/ V (adjust step 0.5/1.0V), V/ V (adjust step 0.5/1.0V) Connection wire length 7.87 in (200mm) Wire cross section AWG 13/2.5mm 2 Dimensions (W x H x D) 82 x 94 x 20 mm 92 x 99 x 22 mm Weight.46 lbs (210g).55 lbs (250g) Type of protection IP68 (1.5 m, 72 h) Warranty 5 Years LED driver data CIS-N-LED 350 ma CIS-N-LED 600 ma CIS-N-LED 700 ma CIS-N-LED 1050 ma CIS-N-LED 1400 ma CIS-N-LED 2800 ma CIS-N-LED 2800 ma** Output voltage 15-49V for 12V system (5-15 LEDS in series), 30-49V for 24V system, (10-15 LEDs in series) Nominal output current 350 ma 600 ma 700 ma 1050 ma 1400 ma 2800 ma per string Max. load power 15W 25W 30W 45W 60W 60W (12 V) / 120W (24 V) Dimming level 0 100% (adjust step 10%) PIR-input (for motion sensor) 4 30V with respect to battery negative, >= 0.7 ma; limited protection up to 50V *Without simultaneous LED output current at a maximum ambient temperature of 50 C. Please note: The CIS-N-LED features an integrated over-temperature protection that will reduce the average charge current in case of too high temperatures. **12 V: V (5-8 LEDs in series)

23 CIS-N (5-20A) Solar Charge Controller w/optional Lighting Control PWM Charge Controllers Technical Drawing CIS=61 CIS-N= CIS / CIS-N The CIS-N was especially developed to deliver optimum performance in industrial PV systems in demanding environments. It features 4-stage, series-switching PWM charge regulation and is fully programmable via infrared device (CIS-CU or MXI-IR). There are two available versions of the CIS-N: Single Load with LED dimming for dimmable ballasted lamps or Dual Load with two independent load channels to prioritize load disconnect. Product Features and Functions Works in 12 or 24V systems (auto recognition) Available in Single Load (w/dimming) or Dual Load versions Fully programmable charge/discharge program via infrared (CIS-CU, CIS-CU-LCD, or MXI-IR) Timed and low-voltage dimming for external LED drivers (Single load only) Fully potted (IP68) aluminum housing UL1741/Class I Div. 2 Certified The CIS-N is NRTL certified Hazardous Locations (HazLoc) tested according to: ANSI/ISA , Class I Division 2 (Groups A-D). Ordinary Locations (OrdLoc) tested according to: UL1741:2005 CAN/CSA C22.2 No Technical Data Type CIS-N-05 CIS -N-05-2L 12/24V auto recognition CIS-N-10 CIS-N-10-2L System voltage Max. charge current 5A 10A 20A Float charge 13.8/27.6V (77 F/25 C) Main charge 14.4/28.8V (77 F/25 C), 30 min. (daily) Boost charge 14.4/28.8V (77 F/25 C), 2 h Activation: battery voltage < 12.3/24.6 V Equalization charge 14.8/29.6V (77 F/25 C), 2 h Activation: battery voltage < 12.1/24.2 V (at least every 30 days) Deep discharge protection: Cut-off voltage 11 12V / 22 24V Reconnect level 12.8/25.6V Overvoltage protection 15.5/31.0V Undervoltage protection 10.5/21V Max. panel voltage 30/50V Temperature compensation -4.2 mv/k per 2V cell (Charge Voltage) Max self-consumption 5 8 ma at 12V 6 10 ma at 24V Grounding Negative grounded Ambient temperature -40 to 140 F / 40 to +60 C Absolute max. device temp. +85 C Max. altitude 13,000 ft (4,000 m) above sea level Battery type Lead acid (GEL, AGM, ooded) Adjustment range: Evening/morning hours Night/day detection Connection wire length Dimensions (W x H x D) Weight 0 15 h (Evenings), 0 14 h (Mornings) V 3.94 in (100mm) 3.2 x 2.5 x.8 in (82 x 64 x 20 mm).33 lbs (150g) CIS-N-20 CIS-N-20-2L Wire cross section AWG 14/2.5mm 2 14 AWG/2.5 mm² 14 AWG/2.5 mm² Type of protection IP68 (5 ft / 1.5 m water depth, 72 h) Warranty 5 Years Technical data dimming CIS-N-05 CIS-N-10 CIS-N-20 output Dimming value 0 100% output power Dimming output voltage 0 10 V (max. 1 ma) 23

24 PWM Charge Controllers CMLup (10-20A) Solar Charge Controllers with Mobile Phone Charging Capability Technical Drawing The CMLup is the new and improved version of Phocos best-selling CML series featuring an easy-to-install design and intuitive LED display. This makes CMLup ideal for rural electrification and recreation systems alike. The CMLup features 4-stage, pulse-width modulated (PWM) charging with series switching. This reduces thermal stress on the controller and PV panel which increases system lifespan compared to shunt-type controllers. Product Features Works in 12 or 24V Systems Intuitive 5-LED User Interface USB Charging port for mobile phones/devices Optional acoustic battery SOC% alarm Selectable current-compensated SOC% or fixed voltage LVD Easy-to-access set-screw wire terminals Application Examples Mobile charging CMLup Technical Data Type CMLup 10 CMLup 20 System voltage 12/24V auto recognition Max. charge/load current 10A 20A Float charge 13.8/27.6V (25 C) Main charge 14.4/28.8V (25 c), 0.5 h (daily) Boost charge 14.4/28.8V (25 C), for 2 h Activation: battery voltage < 12.3/24.6V Equalization charge 14.8/29.6V (25 C), for 2 h Activation: battery voltage < 12.1/24.2V Deep discharge protection Load disconnect voltage Reconnect level Overvoltage protection Undervoltage protection Max. panel voltage V / 22.8V by SOC 11.0/22.0V by voltage 12.8/25.6V 15.5/31.0V 10.5/21.0V 30V (12V system); 50V (24V system) Temperature compensation -25 mv/k at 12V; -50 mv/k at 24V Idle self-consumption < 5 ma Grounding Positive grounded Ambient operating -40 to +122deg F (-40 to +50degC) temperature Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded) USB port 5.0V: 800 ma Max. wire cross section AWG 6 (16mm 2 ) Dimensions (W x H x D) 100 x 100 x 28 mm Weight.27lbs (130g) Type of protection IP20 Warranty 2 Years 24

25 CMLsolid (30 A) Solar Charge Controllers with Mobile Phone Charging and Remote Inverter Control PWM Charge Controllers Technical Drawing At 30A max charge/load current, the CMLsolid is the highest powered version of Phocos popular CML family. With over a million CML controllers in service all over the world, it is easily one of the most widely deployed controllers on Earth. CMLsolid offers additional powerful features such as automatic inverter load control for Go Power! SW Series inverters (GP-SW-1000, GP-SW-2000, and GP-SW-3000) protecting the battery from damage due to deep discharge. An on-board USB port charges mobile phones, tablets and other portable devices from the PV system. Product Family Product Features CMMsolid NEW! Remote display for Phocos CMLsolid charge controller Displays panel current, load current and battery voltage Battery state-of-charge indication via 3 LEDs Load disconnect pre-warning via acoustic signal can be switched ON/OFF Four-stage PWM charging algorithm with (integrated) temperature compensation (float, main, boost & equalization) Automatic 12/24V detection Large terminals: up to 16 mm 2 SOC and voltage-controlled LVD Full electronic protection Aluminium housing (IP20) Charger for external devices via USB port Remote output connector for the GP-SW inverter series Technical Data 140 Type CMLsolid 30 System voltage 12/24V auto recognition Max. charge/load current 30A Float charge 13.8/27.6V (25 C) Main charge 14.4/28.8V (25 c), 0.5 h (daily) Boost charge 14.4/28.8V (25 C), for 2 h Activation: battery voltage < 12.3/24.6V Equalization charge 14.8/29.6 V (25 C), for 2 h Activation: battery voltage < 12.1/24.2 V Deep discharge protection Load disconnect voltage Reconnect level Overvoltage protection Undervoltage protection Max. panel voltage V / V by SOC 11.0/22.0V by voltage 12.8/25.6V 15.5/31.0V 10.5/21.0V 30 V (12V system); 50 V (24V system) Temperature compensation -25mV/K at 12V; -50 mv/k at 24V Remote control Yes (GP-SW-1000, GP-SW-2000, GP-SW-3000) for Go Power! GP-SW Inverters Idle self-consumption 10 ma Grounding Positive grounded Ambient operating -40 to +122deg F (-40 to +50degC) temperature Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded) USB port 5.0 V: 800 ma Max. wire cross section AWG 6/16mm 2 Dimensions (W x H x D) 140 x 90 x 40 mm Weight 0.93 lbs (420g) Type of protection IP20 Warranty 2 Years 25

26 PWM Charge Controllers ECO Series Solar Charge Controller Technical Drawing Phocos ECO solar charge controller is the perfect option for any low-power application requiring superior resistance to the elements. Its small size, reliability, and price make it a great solution for a wide range of projects. ECO is equipped with low-voltage disconnect. It is fully protected electronically and it has an LED display that communicates charge and load status. Product Features and Functions Electronically regulated charging mode: boost, main and float charge Deep discharge protection PWM series regulation (PV panel is not short-circuited) Integrated temperature compensation Fully electronically protected against: panel surge voltage, wrong polarity (panel or battery), overload and short circuit at load Three LED indicators: charge status, SOC, LVD, overload/short circuit IP68 protection Protection Functions Low voltage disconnect function: Disconnects loads when battery voltage is 11.0V Overvoltage disconnect function Overcurrent disconnect function Short circuit disconnect function Reverse polarity protection Overload protection Technical Data Type Eco 10 System voltage 12V Max. charge/load current 10A Float charge 13.8V (25 C) Main charge 14.4V (25 C), 0.5 h (daily) Boost charge 14.4V (25 C), for 2 h Activation: battery voltage < 12.3 V Deep discharge protection 11.0V Load disconnect voltage Overvoltage protection 15.5V Undervoltage protection 10.5V Max. PV panel voltage 30V Temperature compensation -25 mv/k Idle self-consumption 4 ma Grounding Positive grounded Ambient operating -40 to +140degF (-40 to +60deg C) temperature Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded) Wire cross section AWG 13/2.5mm 2 Dimensions (W x H x D) 87 x 51 x 16 mm Weight.24 lbs (110g) Type of protection IP68 Warranty 2 Years Application Examples Eco 26

27 CM Series (4-10 A) Solar Charge Controller PWM Charge Controllers Technical Drawing x The CM Series is an economic solution for preventing battery overcharging in low-power systems. It is simple, compact and easy to use and install. CM Series features a 2-stage PWM charging algorithm that supplies an even charge across all battery cells which lengthens battery lifespan. One green LED states when the CM controller is charging and reducing current via PWM. Product Features and Functions LED charging display Large terminals up to AGW 6/16mm 2 Two-stage PWM charging algorithm (boost & float charging) Reverse polarity protection Designed to work simply and efficiently in small PV systems Technical Data Type CM 04 CM 10 System voltage 12 Max. charge/load current 4A 10A Float charge 13.7V Boost charge 14.5V Activation: battery voltage < 12.2V Max. panel voltage 30V Idle self-consumption Max. panel voltage (Overvoltage protection) 4 ma Grounding Positive grounded Ambient temperature -40 to +122deg F (-40 ro +50deg C) Max. altitude 4,000 m above sea level Battery type Lead acid (GEL, AGM, flooded) 30V Wire cross section AWG 6/16mm 2 Dimensions (W x H x D) 72.6 x 61 x 30.4 mm Weight.15 lbs (68g) Type of protection IP22 Warranty 2 Years 27

28 PWM Charge Controllers Dingo (20A-40A) Programmable Solar Charge Controllers Technical Drawing Phocos DINGO charge controller has a negative ground that makes it a great option to be used in vehicles. Its communication interface uses the MODBUS protocol, which has been tried and tested in harsh environments. Technical Data 57.0 The DINGO s large memory allows data such as charging Ah, load Ah, battery voltage range and the daily state of charge for 512 days. The data of the past 99 days can be accessed directly using the LCD display with LED backlighting. Product Features and Functions User-programmable charge regime and low-voltage disconnect Powerful event control feature can be programmed for the load port and/or a general purpose, voltage-only port Up to 512 days of battery data storage Backlit LCD display shows real time and 99 days of historical data. Auto generator start feature ideal for backup diesel and fuel cell gensets Terminals can be configured as diversion load controllers for wind/hydro charging inputs Accessories D232 - RS232 Interface DNet - Ethernet Adapter DT - Remote Temperature Sensor (neoprene) SHUNT - External current shunt DUSB - USB Interface DSA - External Shunt Adapter DTB - Remote Temperature Sensor (bolt on) PRISM - PC Software Type D2020N D4040P System voltage 12/24/32/36/48V (Selectable) Max. charge/load current 20A 40A Float charge 13.0 V V (Adjustable) Boost charge 13.5 V V (Adjustable) Equalization charge 14.0 V V (Adjustable) (at least every 30 days) Load disconnect voltage 10.0 V V Reconnect level 11.0 V V (Adjustable) Max. panel voltage 20A 40A Temperature compensation (charge voltage) Default: -5mV/K per cell (Adjustable) Self-consumption 9mA@12V - 26mA@60V Grounding Negative grounded Ambient temperature -4 to 131 F (-20 t0 55 C) Max. altitude 13,000 ft (4,000 m) above sea level Battery type Lead Acid (AGM, GEL, ooded) Wire cross section 6 AWG (16 mm 2 ) Dimensions (W x H x D) 5.4 x 4.8 x 1.8 in (137 x 121 x 45 mm) Weight 1 lb (455g) 2.2 lbs (1 kg) Type of protection IP20 Warranty 5 Years 28

29 SPS Series Industrial Telecom Charge Controllers PWM Charge Controllers Technical Drawing The SPS Series solar charge controllers are advanced electronic systems for solar powered applications in remote locations, such as telecommunication sites. They prevent overcharging, reduce electrolyte loss and stop deep discharge. These features considerably extend battery life. Simple modular construction enables this system to display better performance and more features than any other contoller in its class. Slow-switching regulation minimizes EMI emission making SPS ideal for telecom applications. Product Features and Functions Ideal for large telecom sites up to 21 kwp All control levels are fully adjustable and can be changed via serial interface Ultra-low EMI emissions due to (up to 4) bank switching design Two-stage boost/float charging with low heat generation Setup data stored in non-volatile EEPROM memory Available in positive and negative ground versions Available in cabinet or rack mount configurations Customizable to site requirements Technical Data Type SPS 100 SPS 200 SPS 300 System voltage 12/24/48 V versions Max. charge/load current 100 A 200 A 300 A Float charge Adjustable (12-15V/24-30V/48-60V) Boost Maximum Adjustable ( V/27-34V/54-68V) Boost Activation Adjustable ( V/24-27 V/48-54 V) Deep discharge protection, Cut-off voltage Overvoltage protection Max. PV panel voltage Temperature compensation Idle self-consumption Grounding Adjustable ( V/ V/44-47V) Adjustable 23.5V (12V systems), 47.5V (24V systems), 94V (48V systems) -5mV/ C/cell (with optional remote sensor) 60mA (typical)/170ma (max) Positive or Negative ground versions available Ambient operating 5 F to 131 F (-15 C to 55 C) temperature Max. elevation 16,400 ft (5,000 m) Battery type Lead acid (GEL, AGM, ooded) Wire cross section 4/0 AWG (120mm²) Weight 35.3 lbs (16 Kg) Dimensions (W x H x D) 19.7 x 15.8 x 8.3 in (500 x 400 x 210 mm) Type of protection IP66 Cabinet Warranty 5 Years 29

30 Off-Grid Inverters

31

32 GP-IC Series Inverter/Charger with Automatic Transfer Switch W W W GP-SW150 GP-SW300 GP-SW600 GP-SW1000 GP-HS1500 (can surge to 3000 watts) GP-SW1500 GP-SW2000 GP-IC-2000 (can surge to 3000 watts) GP-SW3000 i i i i *B/C = Battery Charging Review additional product specs for actual wattage requirements i = Ideal for high voltage alternators 32

33 Off-Grid Inverters The Go Power! 2000W Inverter Charger 2000 delivers top features and performance at an economical price. It is a 3-in-1 system that expertly combines an inverter, battery charger and automatic transfer switch into one powerful and lightweight unit. The GP-IC-2000 has a compact footprint that saves space and simplifies installation there are fewer components and cables to install! The two 50A legs set its performance apart from common 30A inverter chargers. The configuration allows users to make full use of a 50A shore power service (240V) by passing through up to 12,000 watts of power! It is also compatible with all 30A services. The inverter charger also includes a battery temperature sensor helping extend battery life. Product Features and Functions 2000W pure sine wave inverter; 3400W surge (5 seconds) High inverter efficiency - 90% 100A battery converter/charger, power factor corrected Automatic transfer switch, 2 legs at 50A each (240VAC split-phase) Built-in handles offer easier handling during installation Industry standard protection features Meets UL 458 with marine supplement 3 year warranty Inverter Specifications Output Power (up to 40ºC) Surge Power (5 seconds) Peak Output Current Continuous Output Current Output Voltage Output Frequency Output Waveform Charger Specifications 2000W 3400W 60A 17A 120 VAC Efficiency (Peak) 90% DC Input Voltage Range Maximum Continuous DC Input Current No Load Power Consumption AC Connections Additional Specifications 60 Hz ±0.1Hz Pure Sine Wave 9-17VDC 267ADC Normal Mode:25W, Sleep Mode: 5W Split Phase In/Dual Out, Dual In/ Dual Out Input Voltage Nominal 120VAC Input Voltage Range VAC Input Current 15A Input Power Factor Correction 0.97 typical Optimal Efficiency > 85% Charge Control 3 stage with manual equalize Output Voltage Output Current Change Temperature Compensation 5-16VDC 100ADC Remote Battery Sensor UL 458 UL 1741 (pending) CSA 22.2 #107.1 Part 15, Class B Temperature Humidity -200C to 600C (Over 400C output derates) 0 to 95% RH non condensing Dimensions 12.6 x 6.9 x 13.7 Net Weight lbs Regulatory and Safety Specifications UL certified to 458 (with Marine Supplement) and to CSA 22.2 No FCC Path 15, Class B Tranfer Relay Specifications Transfer Time Transfer Relay Rating 16ms 2 legs at 50A each (240V split-phase) 33

34 Off-Grid Inverters GP-SW Series Pure Sine Wave Inverters Go Power! Pure Sine Wave Inverters are the ultimate choice for appliances and devices that demand a clean, pure source of AC power. The GP-SW1000 will run practically everything in your RV, work truck or cottage and still have pure power for the sensitive loads. Both feature a duplex GFCI receptacle and full overload protection. These inverters are ideal for: kitchen appliances, utility truck equipment, office equipment and consumer electronics. Product Features and Functions Premium DC Pure Sine Wave Inverters Powersave mode Innovative, compact design Ideal Applications Utility Truck Equipment - power tools, battery chargers, test equipment Office Equipment - computers, printers, fax machines and monitors Consumer Electronics - TVs, music systems, lighting, fans, DVD players and satellite dishes Technical Data Common Specifications for all GP-SW Series Inverters Output Waveform Output Voltage ± 3% Input Voltage Protection Pure Sine Wave Low Battery Alarm ± 2% 24V: 10.5V 12V: 21V Low Battery Shut-Down ± 2% 12V: 10V 24V: 20V Operating Temperature Range Storage Temperature Range Cooling Remote Port Option Warranty 110VAC RMS 12V: VDC 24V: 21-30VDC Overload, Short Circuit, Reverse Polarity (Fuse), Over/Under Input Voltage, Over Temperature 32 F F (0-40 C) -22 F F (-30 C - 70 C) Thermostatically Controlled Fan Yes 2 Years Model-Specific Specifications Type GP-SW150 12/24V GP-SW300 12/24V GP-SW600 12/24V GP-SW100012/24V GP-SW /24V GP-SW /24V Continuous Output Power 150W 300W 600W 1000W 2000W 3000W Surge Rating 260W 450W 860W 2000W 4000W 6000W Efficiency 80-90% 80-90% 85-92% 85-92% 85-92% 85-90% No Load Current Draw 12V: 0.2A 24V: 0.2A Powersave 12V: 0.15A 24V: 0.15A 12V: 0.26A 24V: 0.23A 12V: 0.26A 24V: 0.23A 12V: 0.90A 24V: 0.50A 12V: 0.90A 24V: 0.50A 12V: 1.4A 24V:.75A 12V: 0.25A 24V:.15A 12V: 2.8A 24V: 1.5A 12V: 0.6A 24V: 0.3A 12V: 2.0A 24V: 1.6A 12V: 0.55A 24V: 0.35A AC Receptacle Standard NA Dual GFCI Dual GFCI Dual GFCI Dual GFCI Dual GFCI Dimensions (L x W x H) mm 200 x 132 x x 155 x x 180 x x 182 x x 208 x x 208 x 166 Dimensions (L x W x H) in 8 x 5.3 x x 5.3 x x 7.1 x x 7.2 x x 8.2 x x 8.2 x 6.5 Weight 5.9 lbs (2.7 kg) 7.7 lbs (3.5 kg) 5.9 lbs (2.7 kg) 8.8 lbs (4 kg) 21 lbs (9.5 kg) 22 lbs (9.8 kg) Inverter Install Kits Auto Utility Adapter Anderson Lug Terminals GP-DC-KIT2 GP-DC-KIT2 GP-DC-KIT4/3 GP-DC-KIT5/3 Remotes (Optional) No No No Yes Yes Yes 34

35 GP Series Modified Sine Wave Inverters Off-Grid Inverters Go Power! Modified Sine Wave Inverters let you run standard AC appliances wherever you travel. Silent, lightweight, and easy to use, Go Power! Inverters bring electricity to your RV, boat, truck, or even your home in the event of a power failure. Simply plug the item you wish to run into one of the AC receptacles. With an inverter, your AC loads run on your batteries and they can be used any time of day or night - without a generator. This versatile product can run: Utility truck equipment, kitchen appliances, office equipment and consumer electronics. Product Features and Functions Powerful and economical Light-weight and compact Thermal and overload protection Low voltage alarm shutdown Retail ready packaging 1 year warranty Model-Specific Specifications Technical Data Common Specifications for all GP Series Inverters Output Waveform Modified Sine Wave Output Voltage ± 3% 110 VAC RMS +5%/-10% Output Frequency ± 1% 60 Hz Input Voltage 10-15VDC Protection Overload, Over-Voltage, Under-Voltage, Over Temperature Low Battery Alarm ± 2% 10.5V Low Battery Shut-Down ± 2% Operating Temperature Range Storage Temperature Range Warranty watts GP-SW150 GP-SW600 GP-SW300 Laptop Fan Gaming console Music system DVD player Soldering gun Power tool charger Flatscreen TV Jigsaw Drill 3/8 Disc grinder Skill saw Microwave Laser printer Well Pump (AC) Drill 1/2 10V 32 F F (0-40 C) -22 F F (-30 C - 70 C) 1 Year GP-SW1000 GP-SW1500 GP-SW3000 GP-SW2000 Type GP-175 GP-300 GP-600 GP-1000 GP-1750HD GP-3000HD Continuous Output Power 175W 300W 600W 1000W 1500W 3000W Surge Rating 210W 400W 860W 1300W 2100W 6000W Efficiency 80-90% 80-90% 80-90% 80-90% 80-90% 85-90% No Load Current Draw 0.2A 0.2A 0.2A 0.2A 1.1A 1.5A Cooling Passive Continuous Fan Continuous Fan Continuous Fan Thermostatically controlled Thermostatically controlled AC Receptacle Dimensions (L x W x H) mm 135 x 53 x x 89 x x 86 x x 147 x x 240 x x 230 x 158 Dimensions (L x W x H) in 5.3 x 2.1 x x 3.5 x 2 9 x 3.4 x x 5.8 x x 9.4 x x 9.1 x 6.2 Weight 1.1 lbs (.5 kg) 1.8 lbs (.8 kg) 4.6 lbs (2.1 kg) 4.2 lbs (2 kg) 12.1 lbs (5.5 kg) 14.9 lbs (6.8 kg) Remotes (Optional) No No No No Yes Yes 35

36 DC Lighting/Refrigeration

37

38 DC Lighting/Refrigeration SL LEDs (3-13W) DC LED Bulb Lamps The Phocos SL LED lamps provide high illumination levels with very low power consumption and a long lifespan. The 12/24V DC lamps can be used directly in 12V or 24V battery or solar systems without any ballast. Product Features and Functions Extremely low power consumption High luminous efficiency Lifespan 50,000h Infinite number of switching cycles Metal housing Product Family SL-BY03 DC high efficiency LED lamp Power consumption 3W SL-BY05 DC high efficiency LED lamp Power consumption 5W SL-BY07 DC high efficiency LED lamp Power consumption 7W SL-BY09 DC high efficiency LED lamp Power consumption 9W SL-BY13 DC high efficiency LED lamp Power consumption 13W Technical Data Type SL-BY03 SL-BY05 SL-BY07 SL-BY09 SL-BY13 System voltage 10.5V - 30V Power consumption 3W 5W 7W 9W 13W Supply current V ± 10% V ± 10% V ± 10% V ± 10% V ± 10% Luminous intensity > 210 Im > 350 Im > 490 Im > 630 Im > 900 Im Luminous efficiency > 80 Im / W (@12 V) Irradiation angle Light color Cool white (typical: 5,600 K) Ambient temperature -4 to +140deg F (-20 to +60deg C) Humidity max. Socket 95% not condensing E27 (Edison) Diameter 50 mm 60 mm 60 mm 70 mm 90 mm Length 95 mm 105 mm 120 mm 120 mm 175 mm Type of protection IP30 IP52 IP30 Warranty 2 Years 38

39 SFL Series DC LED Sunflower Lamps DC Lighting/Refrigeration The Phocos SFL Sunflower Series LED lamps have high lumen output and are extremely reliable. Due to their advanced and over-temperature protection, SFL series lamps can withstand extreme conditions. The unique heat sink design with fins or gaps helps avoid insects and dust from blocking heat dissipation. SFL Series lamps provide excellent performance in light efficiency (up to 100lm/watt). Product Features and Functions 50,000-hour lifespan Withstand extreme conditions Infinite number of switching cycles Unique design protects from insects or dust blocking heat dissipation Technical Data Type SFLw - 12/02CW SFLw - 12/03CW SFLw - 12/05CW System voltage 10.5V - 30V Power consumption 2W 3W 5W Supply current 0.17A 0.25A 0.42A Luminous intensity 200 lm 300 lm 500 lm Luminous efficiency >100lm/W CRI 80% Light color 6000K (+/-10%) Temperature range -4 to 122 F (-20 C to +50 C) Humidity max. 95% not condensing Wire/connector 5m, AWG20 with Switch and Barrel plug Diameter 122/60 mm Length 122/60 mm Application Examples Solar home systems Off-grid cabins Mobile vendors RVs Boats Type of protection Warranty IP50 2 Years 39

40 DC Lighting/Refrigeration CL Series DC Compact Fluorescent Lamps Phocos CL Series lamps can be used directly in 12V battery or in PV systems to provide very high levels of light and extremely low power consumption. The lamps are regulated by DC-preheating circuit which makes a large number of switching cycles possible (IEC925). The CL Series lamps have a lifespan of over 8,000 hours which makes them reliable and low-maintenance. Units 11W+ are equipped with over-temperature protection (OTP) to prevent damage from overheating. Technical Data Type Nominal Voltage Voltage range CL1207C CL1207W 12V 11-15V CL1211C CL1211W CL1215C CL1215W Nominal power rating 7 W 11 W 15 W Nominal current rating 560 ma 900 ma 1,200 ma Light intensity 350 lm 630 lm (C) 670 lm (W) Light temperature 6,400 K (C) / 2,700 K (W) 925 lm (C) 950 lm (W) Product Features and Functions Lifespan > 8,000 hour Over 8,000 hours of light High lumen/watt efficiency Large number of switching cycles Standard E27 screw-in socket Temperature range Type of protection Socket +14 to +122deg F (-10 to +50degC) IP30 E27 (Edison) +14 to +104deg F (-10 to +40deg C) Dimensions ø 55 x 138 mm ø 55 x 170 mm ø 58 x 145 mm Application Examples Solar home systems Off-grid cabins RVs Boats Weight 0.19 lbs (85g) 0.22 lbs (100g) 0.21 lbs (95g) Warranty 2 Years 40

41 FR Series DC Chest Refrigerator/Freezer DC Lighting/Refrigeration Phocos FR Series are 12/24V, battery-powered refrigerators that does not require an inverter to operate. Their maintenance-free, Danfoss brushless DC compressor allows for direct operation from a battery which increases system efficiency. Energy-effcient features such as extra-thick insulation and a lockable lid make them especially suited for solar-powered applications. The four caster glides make moving the unit around a breeze. The aluminum lining is easy-to-clean, there is an interior light, adjustable temperature, and a low-frost system that reduces the formation of water condensation and ice. Product Features and Functions Doesn t require an inverter Works with both 12/24V systems (Auto Detection) High-efficiency cooling Eco-friendly cooling agent Application Examples Off-grid homes Cabins Food trucks/vendors Rural merchants Technical Data Type FR170MP FR240MP Operating voltage 12/24V DC (nominal) Temperature range +3 to +43 F/-16 to +6 C Ambient temperature +50 to +110 F/10 to 43 C PV panel size (typ./ max.) 80/160W 100/20W Energy consumption at 70 F/21 C Energy consumption at 90 F/32 C 90 Wh/day (fridge), 296 Wh/day (freezer) 197 Wh/day (fridge), 485 Wh/day (freezer) Content (capacity) 170 l 240 l Refrigerant Door type Color Wheels Dimensions of Cabinet (W x H x D) Inner Dimensions (W x H x D) R-134a Top opening White Optional 34 x 29.7 x 26.7 in 914 x 755 x 680 mm 26.4 x 26.4 x 17.2 in 671 x 670 x 436 mm 104 Wh/day (fridge), 398 Wh/day (freezer) 218 Wh/day (fridge), 572 Wh/day (freezer) 45 x 33.4 x 27 in 1144 x 849 x 684 mm 35.4 x 26.4 x 17.3 in 900 x 671 x 440 mm Weight 110 lbs (50kg) 154 lbs (70kg) Warranty 2 Years 41

42 Turnkey Solutions

43

44 LS Series Plug and Play LiFePO4 Solar Home System Kits Technical Drawing 44

45 Turnkey Solutions Phocos LS Series portable energy kits were designed to supply long-lasting home lighting and mobile device charging in a compact and portable package. Built around a high-quality, long lasting Lithium Iron Phosphate (LiFePO4) battery pack with MPPT charging, the LS series supports up to 6 A of continuous current at 12 VDC and is available in standard 4 Ah and 7 Ah versions. The plug and play design allows for simple integration and customization based on a wide range of standard and optional accessories. Product Features and Functions Long-lasting Lithium battery pack (LiFePO4) Intuitive user interface with back-lit LCD Onboard USB charging port for mobile device Built-in solar charger with MPPT 2-Year warranty Application Examples Solar home systems Camping Remote cabins/buildings RVs/boats Hiking/backpacking Accessories Technical Data Battery Pack Type LS4000-Kit1 LS7000-Kit2 Nominal System Voltage 12.8V Battery Type Accessories Included LiFePO4 Battery Capacity 4000mAh/51Wh 7000mAh/89Wh Charging Current 1.5A (max. 20W) Load Current 5A 6A Working Temperature USB Outlet -4 to 122 F (-20 to +50 C) 5V/1.5A Size 6.2 x 3.3 x 2.6 in (158 x 85 x 65 mm) 8.8 x 3.3 x 2.6 in (224 x 85 x 65 mm) Display LCD + LED Connectors Panel: 1 Barrel (5.5/2.5mm) - Load: 3 Barrel (4.75/1.7mm) - USB: USB-A Certfications Lighting Global Certied Type LS4000-Kit1 LS7000-Kit2 2W, 200 lm SFL LED bulb 2 2 3W, 300 lm SFL LED Bulb W Mini SFL LED Bulb 1 3W TL LED Tube Lamp 1 10W Poly Solar Panel Panel Mounting Hardware Panel Combiner/Distributor 1 Sm Tube Lamp Extension Wire 1 Cigarette Lighter Socket USB Splitter 1 Phone Charging Set 1 1 iphone 3-4 Adapter 1 1 iphone 5+ Adapter 1 1 LEDs Type SFLw-12/02CW SFLw-12/03CW SFLw-5/0.25CW TL-12/03CW Light Color/Temperature 6000K (+/-10%) Power (+/-0.5W) 2W 3W.25W 3W Voltage 12V 5V 12V Current 0.17A 0.25A 0.05A 0.25A Nominal Lumen Output 200lm 300lm 17 lm 270 lm Lumen Efficiency >100 lm/w >68 lm/w >90 lm/w CRI >80% >70% >80% Working Temperature -20C to +50C LED Lifespan >50,000 hrs IP Rating IP50 IP40 IP30 Humidity <95% (non-condensing) Diameter/Height 4.8/2.4 in 2.4 x 1 in (122/60 mm) (60/26 mm) Diameter/Length 11.8/1 in (300/25mm) Switching Cycles Infinite 45

46 Turnkey Solutions Mini Pico Lamp Compact Solar Lamp and Energy Hub Technical Drawing 69 mm 197 mm 94 mm The Mini Pico is the latest member of Phocos innovative family of Pico portable light and energy stations. Brighter and more compact than ever before, Mini Pico features a rugged, sealed housing that was built to withstand dust, insects, shock and water/corrosion. Two available USB charging ports keep your mobile devices charged anywhere you go, with and without AC power. High Powered 220 lumens for up to 6 hours on a single charge Multi-functional 2 USB outputs to charge mobile devices such as phones & music players Keep Mini Pico charged with a solar panel, car charger or AC adapter Tough Protection Protective housing (IP65) against soil and climate influences Application Examples Backpacking Emergency preparedness Camping Boating/RVs Rural electrication Technical Data Type Battery Light intensity Light color Lighting level (time) DC charging input Charge time via solar panel Charge time via AC Charging technology Ambient temperature range Type of protection Dimensions (L x D) Weight Warranty USB Charge Data: Type Mini Pico Output voltage 5.5V Nominal output current 500 ma Overload and short-circuit protection Yes Plug 2 x USB-A Mini Pico Rechargeable 7.4V, 2000 mah Li-Ion battery pack highly protected and safe 220 Im 6500K 220 lm about 6 hours 120 lm about 15 hours 60 lm about 26 hours 5 lm about 120 hours Solar module Vmp > 7V, Voc < 21V (Imp: 590 ma, Isc:610 MA) 4-6 hours (with 10W panel) depending on solar irradiation 3-4 hours (12V/1A) MPPT -4 to 122 F (-20 to +50 C) IP x 3.7 in (197 x 94 mm).73 lbs (330g) 2 Years 46

47 Pico Lamp Solar Light and Energy Hub Turnkey Solutions Technical Drawing The Pico Lamp is a multifunctional stationary or mobile lighting device that is specially designed to meet the needs of rural households and recreational activities. It is equipped with a high-efficiency power LED and excellent charging technology. The device can easily be installed as a ceiling lamp and is portable for using as a lantern/flashlight. The Pico features industry-leading charge capacity which allows the user to have sufficient light for up to 55 hours depending upon the level of light selected. The high-power LED supplies up to 120 lumens of light and has an extremely long lifespan (50,000 h). Equipped with a USB output, the Pico Lamp also facilitates fast mobile phone or MP3 player charging. A robust sealed housing ensures continued function in dusty or humid environments. The capacitive touch switch has no moving parts and is fully protected against corrosion. With the Pico Accessory Series, the Pico Lamp can be extended to a modular lighting system and can be configured precisely according to the needs of the user. Optionally available: Pico Lamp Accessory Series USB mobile phone adaptor for most common brands AC charger, 12V car adaptor Remote switch USB extension with 3m cable NiMH 2100 mah rechargeable batteries 3W and 5W module USB hub for using remote switch and charging mobile phone at the same time Pico System Expander: Allows charging and operation of multiple Pico Lamps in the same system Technical Data Type Battery Light intensity Light color Lighting level (time) DC charging input Charge time via solar panel Charge time via AC Charging technology Ambient temperature range Type of protection Dimensions (L x D) Weight Warranty USB Charge Data: Type Output voltage Nominal output current Overload and short-circuit protection Plug Pico Lamp 4.8V (4x AA NiMH, 2,100mAh, low self-discharge) 120 lm 3,950-4,300K 120 lm about 5.5 hours 50 lm about 16.5 hours 20 lm about 55 hours Solar module Vmp > 7V, Voc < 25V (Imp: 1450mA, Isc: 1500mA) 5-8 Hours (with 3W solar panel) depending on solar irradiation 2-3 Hours (12V/800mA) MPPT -4 to +122deg F (-20 to +50degC) IP x 6.10 in (296 x 155mm) 1.26 lbs (330g) 2 Years Pico Lamp V 750mA Yes USB-A 47

48 P-Box/E-Box Solar Powered Pre-Assembled Cabinets P-Box P-BOX The P-Box off-grid cabinet can provide a small business and other consumers such as solar home system with energy. It can also provide back-up power in various other applications. Only PV modules and batteries are addtionally required. E-Box The E-Box off-grid cabinet can provide a small business and other consumers such as solar home system with energy. It can also provide back-up power in various other applications. The system can be configured to use different types of battery technologies. Product Features and Functions P-Box Quick AC energy solution out of a box Only additional PV modules and batteries required 1 phase, 3 phase VAC: 120/220V 1 Ø; 380/220V 3 Ø Fully integrated (all-in-one) Easy to install (plug and play) PV modules string box included E-Box Quick AC energy solution out of a box Only additional PV modules required 1 phase, 3 phase VAC: 220V 1 Ø; 380/220V 3 Ø Fully integrated (all-in-one) Easy to install (plug and play) Storage battery PV modules string box included E-BOX Storage 48

49 Turnkey Solutions Technical Data Type Suggested Size SOLAR PV SOLAR CHARGER INVERTER Kit Name Model PV Panel (Wp) Nr. of panels Solar Power (W) Nr. of strings Max nr. panels Max nr. strings Model Charger USB port Type of Charger Charger Output Model Inverter P-Box Solar Home Mini AC350 12V CMLsolid Yes PWM 30A SI V P-Box Solar Home Basic AC700 24V CMLsolid Yes PWM 30A SI V P-Box Solar Home Basic 38V /40 No MPPT 40A SI V AC700MP P-Box Solar Home Basic 38V /40 No MPPT 40A SI V AC1500MP P-Box Solar Home Basic 38V /40 No MPPT 40A SI V AC2000MP P-Box Solar Advanced 38V /60 No MPPT 60A SI V AC3500MP24 P-Box Solar Advanced 38V /60 No MPPT 60A SI V AC3500MP48 P-Box Solar PRO AC7000MP 38V /60 No MPPT 60A 2 x SI V P-Box Solar PRO AC10500MP 38V /100 No MPPT 100A 3 x SI V Inverter Output (W) Voltage Optional AC Power Supply Phocos P-Box can also be equipped with an optional AC power supply for charging batteries and powering AC loads. In parts of the world where grid power is available from a utility, the addition of AC charging enables the P-Box system to utilize both PV and AC power to power loads and charge batteries. This allows backup to PV power when solar conditions are less than ideal and supplies constant energy to critical and sensitive loads. Datalogging/Communication Contact us about remote datalogging and networking solutions for P-Box. Automatic Change-Over Relay (ACR) Another available option for Phocos P-Box systems is the inclusion of an automatic change-over relay (ACR) for switching to battery backup in the event of a grid outage. Phocos ACR options switch loads to battery backup within a few milliseconds once outage occurs and automatically switches back to grid power when service has been restored. This ensures constant power to critical loads in the event of a service outage. Maintenance / Care Phocos provides continuous assistance to users and installers with engineering services that will help installers devise and size very reliable, cost-effective solutions. Special attention must be delivered to solar insolation conditions of the locality/site of the installation. In addition, battery storage must be appropriately sized to ensure system autonomy 24/7/365. The P-Box/E-Box can be sized for hours, days, or even weeks of backup power. 49

50 Wire Gauge Recommendations for Solar Installations The distance between the battery and charge controller should be as short as possible to minimize voltage drops due to resistance in the wiring. Battery to Charge Controller Phocos recommends that the maximum voltage drop between the battery and charge controller not exceed 0.1V in a 12V system and 0.2V in a 24V system. Solar to Charge Controller Phocos recommends that the maximum voltage drop between the solar panel/array and the charge controller should not exceed 1.0VDC in a 12V system and 2.0V in a 24V system. The following tables contain a selection of possible combinations of minimum wire cross sections and matching maximum wire lengths to limit the voltage drop due to resistance in wiring. Charge Controller / Battery Charge Controller / PV-Module / Load Current Max Distance (m) Min. Wire Cross Section (mm 2 ) Max Voltage Drop (mm2) Max Distance (m) Min. Wire Cross Section (mm2) Max Voltage Drop (mm2) 12V 24V 12V 24V 12V 24V 12V 24V 12V 24V 12V 24V 5A A A A A A

51 Wire Gauge Recommendations for Solar Installations, Continued Charge Controller / Battery Charge Controller / PV-Module / Load Current Max Distance (m) Min. Wire Cross Section (mm 2 ) Max Voltage Drop (mm2) Max Distance (m) Min. Wire Cross Section (mm 2 ) Max Voltage Drop (mm2) 12V 24V 12V 24V 12V 24V 12V 24V 12V 24V 12V 24V 5A A A A A A Metric Cable Size Diameter Cross Section (mm2) AWG Zoll mm mm *Phocos strongly recommends installing an inline fuse as close to the battery terminal as possible. 15A fuse for 10A charging or 30A fuse for 20A charging. 51

52 Germany Bangladesh China Japan USA Indonesia Kenya India Bolivia Brazil South Africa Singapore Australia Phocos North America 325 S. Euclid Ave. Tucson, AZ Phone +1(520) Fax +1 (520) Version: Subject to change without notice