CELLS AND BATTERIES Understand the general features of cells and batteries Describe the relationship between cells and batteries. Describe the basic

Size: px

Start display at page:

Download "CELLS AND BATTERIES Understand the general features of cells and batteries Describe the relationship between cells and batteries. Describe the basic"

Bethany Lawrence
6 years ago
Views:

1 Cell & Batteries

2 CELLS AND BATTERIES Understand the general features of cells and batteries Describe the relationship between cells and batteries. Describe the basic operation of a battery. Compare between primary and secondary cells. List types of cells and batteries. Understand cell connections in series, parallel and series-parallel Discuss the effects of different cell connections: a. Series b. Parallel c. Series-parallel Determine the total voltage of series sources with the same polarities. Determine the total voltage of series sources with opposite polarities. Describe the internal resistance of cells connected in series and parallel. Determine the total internal resistance of cells connected in series and parallel. Identify the relationship between the terminal voltage drops and load current.

CELLS AND BATTERIES THE CELL A cell is a device that transforms chemical energy into electrical energy. The simplest cell, known as either a galvanic or voltaic cell, is shown in figure 2-1.

3 CELLS AND BATTERIES THE CELL A cell is a device that transforms chemical energy into electrical energy. The simplest cell, known as either a galvanic or voltaic cell, is shown in figure 2-1. It consists of a piece of carbon (C) and a piece of zinc (Zn) suspended in a jar that contains a solution of water (H20) and sulfuric acid (H2S04) called the electrolyte. Figure Simple voltaic or galvanic cell.

THE CELL The cell is the fundamental unit of the battery. A simple cell consists of two electrodes placed in a container that holds the electrolyte.

4 THE CELL The cell is the fundamental unit of the battery. A simple cell consists of two electrodes placed in a container that holds the electrolyte. In some cells the container acts as one of the electrodes and, in this case, is acted upon by the electrolyte. This will be covered in more detail later.

5 ELECTRODES The electrodes are the conductors by which the current leaves or returns to the electrolyte. In the simple cell, they are carbon and zinc strips that are placed in the electrolyte; while in the dry cell (fig. 2-2), they are the carbon rod in the center and zinc container in which the cell is assembled.

6 ELECTROLYTE The electrolyte is the solution that acts upon the electrodes. The electrolyte, which provides a path for electron flow, may be a salt, an acid, or an alkaline solution. In the simple galvanic cell, the electrolyte is in a liquid form. In the dry cell, the electrolyte is a paste.

7 ELECTROCHEMICAL ACTION If a load (a device that consumes electrical power) is connected externally to the electrodes of a cell, electrons will flow under the influence of a difference in potential across the electrodes from the CATHODE (negative electrode), through the external conductor to the ANODE (positive electrode). A cell is a device in which chemical energy is converted to electrical energy. This process is called ELECTROCHEMICAL action.

8 ELECTROCHEMICAL ACTION The voltage across the electrodes depends upon the materials from which the electrodes are made and the composition of the electrolyte. The current that a cell delivers depends upon the resistance of the entire circuit, including that of the cell itself. The internal resistance of the cell depends upon the size of the electrodes, the distance between them in the electrolyte, and the resistance of the electrolyte. The larger the electrodes and the closer together they are in the electrolyte (without touching), the lower the internal resistance of the cell and the more current the cell is capable of supplying to the load.

9 Types of cells Cells are classified as either primary or secondary. In a primary cell, chemical reactions use up some of the materials in the cell as electrons flow from it. They can t be recharged. When these materials have been used up, the cell is said to be discharged and cannot be recharged.*

10 Primary cells Primary cells can be further classified as either wet or dry. The primary wet cell was first developed in 1800 by Italian scientist, Alessandro Volta. This cell is therefore called the voltaic cell.

11 Dry cell battery

12 Secondary Cells Unlike primary cells, a secondary cell can be discharged and recharged many hundreds of times. Secondary cells are often referred to rechargeable batteries. A car battery consists of a group of secondary cells.

BATTERIES A battery is a voltage source that uses chemical action to produce a voltage. In many cases the term battery is applied to a single cell, such as the flashlight battery.

14 BATTERIES A battery is a voltage source that uses chemical action to produce a voltage. In many cases the term battery is applied to a single cell, such as the flashlight battery. In the case of a flashlight that uses a battery of 1.5 volts, the battery is a single cell. The flashlight that is operated by 6 volts uses four cells in a single case and this is a battery composed of more than one cell. There are three ways to combine cells to form a battery.

15 TYPES OF CONNECTION CELLS Series cells Parallel cells Series-Parallel cells Cells connected in SERIES provide a higher voltage. while cells connected in PARALLEL provide a higher current capacity. To provide adequate power when both voltage and current requirements are greater than the capacity of one cell, a combination SERIES- PARALLEL network of cells must be used.

16 Series-Connected Cells Assume that a load requires a power supply of 6 volts and a current capacity of 1/8 ampere. Since a single cell normally supplies a voltage of only 1.5 volts, more than one cell is needed. To obtain the higher voltage, the cells are connected in series as shown in figure 2-6.

17 Series connected cells

18 Series-Connected Cells Formula ; Total of Internal resistance = n x r ( ) Where n = total of cells in the circuit Load Resistance = RL Total of resistance = (RL + nr) Total of e.m.f = n x E (volt) Current, I = n E (Ampere) (RL + nr)

19 Parallel-Connected Cells

20 Parallel-Connected Cells Formula ; Total of Internal resistance = r / n ( ) Where n = total of cells in the circuit Load Resistance = RL Total of resistance = (RL + r/n) ( ) Total of e.m.f = E (volt) Current, I = E (Ampere) (RL + r/n)

21 Series-Parallel Connected Cells

22 Series-Parallel Connected Cells Formula ; Total of Internal resistance (in series) = nr ( ) Total of Internal resistance = nr / m ( ) Where m = total of internal resistance in parallel Load Resistance = RL Total of resistance = (RL + nr / m) ( ) Total of e.m.f = ne (volt) Current, I = ne (Ampere) (RL + nr/m)

23 Example for series cells connection

25 Example for Parallel cells connection

27 Example for Series-Parallel cells connection

UNIT 2 CELLS AND BATTERY

2.1 General Features of batteries UNIT 2 CELLS AND BATTERY 2.1.1 The relationship between cell and batteries Generally, a cell delivers a certain voltage that is a function of what chemical reactions are