RPM AC Inverter Duty Stock Motor Mod Express. CA401 Effective Date: September 3, 2012

Size: px

Start display at page:

Download "RPM AC Inverter Duty Stock Motor Mod Express. CA401 Effective Date: September 3, 2012"

Hugo Kelley
5 years ago
Views:

1 RPM AC Inverter Duty Stock Motor CA401 Effective Date: September 3, 2012

2 Modification Section for RPM AC Motors RPM AC Frames FL180 through L440 How to Price an Order 1. Find the basic list price of the required stock RPM AC motor. 2. Add list prices of the Modifications from this section to the basic motor list price. 3. Apply appropriate multiplier for discount symbol E-2 to total list price. 4. Enter Order. Note: Customers will absorb all freight costs Note: Modification prices do not include the cost of the motor. Some modifications may require more than (1) Modification Number to complete the Mod. How and Where to Enter an Order BaldorReliance customers can send their orders to the local BaldorReliance District Office. To order, specify the catalog number of the stock product and the mod number. Notice No charge orders will not be accepted or processed. This includes warranty replacement orders. The correct method is to charge for the replacement order and issue credit for the original order. Delivery Cycle The delivery cycle will be subject to the availability of the stock motors and parts. Some modifications only take a couple of days, others may take 1-2 weeks. For rush orders, check that the basic motor is in stock and then call the local district office customer service to get a quotation on the time required for your particular modifications. Lead times of 1-2 weeks are subject to availability of stock motors in the Fort Smith warehouse. Mods done at the Gainesville motor plant will have transportation time from the Fort Smith warehouse and will require an additional delivery time. MOD Express Cancellation Policy Should it be necessary to cancel an order for a motor after it is modified, but before it ships a cancellation charge of double the modification charge will be invoiced to the customer. Any MOD order cancelled before the modification is completed is subject to a 25% cancellation charge. Once the motor is shipped, modified motors can be returned to stock at purchaser's expense and will be invoiced at double the MOD price plus a 10% restock fee.

3 Mod No. Modification Page Mod No. Modification Page M1 Adapter Bases or Rails...1 Slide Base Adapter Rails M2 Air Pressure Switch...1 M3 Balance, Dynamic...1 M4 Bearings, Insulated...2 M5 Belted Drive...3 M6 M7 M8 M9 M10 M11 Brakes - Drive End...3 Conduit Box Modifications...3 One Size Larger than Std Cast Iron Mill Type Auxiliary Mounting F-1 or F-2 Covers (DPFV)...4 Vertical Mount Splashproof Drain Plugs...4 Automatic Breather Drain Standard T Drain Enclosure Modification...4 Separately Ventilated TEAO-Piggyback XT Features Paper Mill Duty End Brackets...5 C-Face Bracket D-Flange Bracket M12 Feedback Devices...5 M13 Encoder Mounting...6 M13.1 Encoder Mounting Special...6 M13.2 Provisions for Mounting...6 M14 Filter Kits...6 M15 Insulation Tropical...7 M16 Lubrication...7 Fittings Automatic Grease Relief Fittings M17 Nameplates...7 M18 Packaging...7 M19 Paint, Special...7 M20 Service Factor...8 M21 Shaft Modifications...8 Slinger Lip Seal M22 Space Heaters...8 Space Heater Aux. Conduit Box M23 Terminal Blocks...9 Main Terminal Block Accessory Terminal Block M24 Tests...9 Routine Test Complete Test

4 M1 M2 M3 Adapter Rails Or Slide Base Bases Rails-Adapter $571 $1,128 $1,328 $1,619 $2,014 $2,797 $3,354 $4,390 Rails are not suitable for wall or ceiling mounting. Air Pressure Switch Switches Standard Enclosure All Frames $1049 Weatherproof Enclosure All Frames $1542 Monitors pressure differential between inside and outside of motor to actuate SPDT switch when pressure drops below preset value giving an immediate indication that the air supply to the motor is reduced. Applicable to forced ventilated motors with either motor mounted blower or separately forced ventilated by customer supplied air. Since motors dependent on force ventilation will have a rapid rise in temperature after the air supply is interrupted, the customer must take immediate corrective action when the switch trips. Contacts rated 15 amps, volts, 60 Hz AC resistive; 1/8 HP at 125 volts; 1/4 HP at 250 volts, 60Hz AC. Applicable to frames FL180 thru L440. Note: Mounted on motor bracket at air inlet end. Balance, Dynamic Electric Motor Balance And Vibration Preface Balance can be defined as the state of the mass distribution within the rotating assembly about its axis of rotation. The eccentricities of this mass distribution are referred to as unbalance. The amount of unbalance is stated in units of mass times a distance, such as gram-inches, gram-centimeters or gram-millimeters. Vibration is defined as the motion of a body in response to forces imposed upon that body. Vibration in assembled motors can be measured as amplitude in inches, peak to peak, or as velocity in inches per second or as velocity in millimeters per second. Displacement, inches, Peak to Peak = x Velocity, Inches per Second, Peak RPM Displacement, Inches, Peak to Peak = x Velocity, Millimeters per Second RMS RPM Displacement, Inches, Peak to Peak = x Velocity, Millimeters per Second, Peak RPM Velocity, in/sec peak = Displacement, inches peak x 2 p x f 60 or Displacement, in p-p x p x f 60 RMS = Peak to Peak x Peak = Peak to Peak x 0.50 (f = rpm) In addition to unbalance, there are other sources of motor vibration such as even air gap, frame distortion due to improper torquing of foot mounting bolts, operation at or near critical speed and various bearing, support, coupling and electromagnetic effect problems. Unbalance is the predominant component in vibration when displacement is measured. The many other, higher frequency components show up when measuring velocity. 1

5 Pricing Standard BaldorReliance motors are manufactured in accordance with the vibration limits stated in NEMA MG1, Part 7. Per NEMA, bearing housing vibration is stated as the peak value of the unfiltered vibration velocity in inches per second. Table I shows bearing housing vibration velocity in inches per second as well as other units for comparison. Shaft vibration measurements are recommended for sleeve bearing machines only. Contact BaldorReliance when you have sleeve bearing requirements. Table I - Standard Machine Vibration Limits Speed rpm (NEMA Standard) Unfiltered Vibration Velocity in/sec peak 2 (IEC Terminology) Unfiltered Vibration Velocity mm/sec rms Less than Table II - Special Machine Vibration Limits Unfiltered Vibration Velocity (in/sec) peak Speed rpm Standard Precision (1) Use the following pricing chart for Machine Vibration Limits Vibration Category Standard per Table I M4 N/C N/C N/C N/C N/C N/C N/C N/C Precision $765 $765 $765 $1,426 $2,875 $4,118 $4,118 $4,361 Bearing Insulated To change the opposite drive end ball bearing to an insulated bearing, please make the following list price addition. These are for horizontal mounting only. If both bearings are to be insulated, use two times the list price in the table. Insulated bearings are not available for roller bearings. FL180 FL/RL210 FL/RL250 L/FL/RL280 L320 L360 L400 L440* $1,503 $1,503 $1,758 $2,669 $2,945 $2,945 $2,992 $3,100 Note: All L440 and FL440 frames include an insulated opposite drive end bearing as standard.

6 M5 Belted Drive Provides for roller bearings and special shaft on frames UL280-UL320 used for belted drive. Drive Type Belted Drive (1) (1) (1) $1,378 $1,604 (2) (2) (2) (1) Standard oversized ball bearing is normally suitable for belted or coupled duty. See RADIAL LOAD CAPACITY in application section. (2) Order as custom motor. M6 Brakes Table I - Drive End -The Stearns double C-Face 87,700 series brake can be mounted on the drive end of all C-Face stock enclosures. Motor mounting positions, i.e. horizontal or vertical, must be specified on the order. Note: Drive end mounted brakes are not suitable for belted duty. Manual release - standard on all Stearns brakes. Motor Mounted Brake - Drive End (1) Nominal Brake (ft.-lbs) Standard Enclosure Dust-Tight, Waterproof Enclosure 10 $4,363 $5, $4,467 $5, $4,558 $5, $4,711 $5, $4,920 $5, $6,461 $7, $6,913 $7,902 (1) For coupled duty only. M7 Conduit Box Conduit Box Feature One Size Larger C/B - (Not applicable on L400 - L440 frames) $363 $363 $363 $363 $454 $539 N/A N/A Cast Iron C/B - (Not applicable to L400 - L440 frames) $363 $363 $363 $564 $806 $972 N/A N/A Mill Type C/B (1) - (RL210 - L360), standard on all L400 & L440 frames $803 $803 $803 $1,128 $1,606 $1,931 Std Std Auxiliary C/B N/A $371 $371 $674 $674 $674 $791 $791 F-1 or F-2 Mounting(2) $467 $622 $622 $648 $648 $680 $751 $751 (1) Heavy gauge, large rectangular metal box. Standard on L400 and L440 frames. (2) All stock totally enclosed RPM AC have top mounted conduct box. All DPFV motors are F-1 as standard. Note: For FL180 - FL/RL 250 Frames, Stock Kits available for conversion to F-1 or F-2 mounting on all TEFC & TEBC, and for F-2 mounting on DPFV. 3

7 M8 M9 M10 Covers (DPFV) Type Vertical Mount Louvers (1) $163 $247 $247 $376 $648 $648 $907 $907 Splashproof Covers (2) $273 $571 $726 $726 $726 $726 $1,088 $1,088 (1) Special bracket louvers designed to insure drip-proof protection for vertically operated foot or flange mounted motors. (2) For dripproof machines to meet NEMA MG requirements for splashproof enclosures. Provides protection against liquid drops or solid particles from entering the motor at any angle not greater than 100 degrees downward from the vertical. Drain Plugs Type Automatic Breather Drain* All Frames $202 Standard T Drain* All Frames $48 Note: Drain Plugs are at the lowest point of the motor. Enclosure Modification Encl. Mod. Separately Ventilated N/A -$301 -$946 -$1,426 -$1,788 -$2,060 -$2,241 -$2,687 TEAO Piggyback $571 $571 $803 $1,076 $1,437 $1,697 $2,292 $2,629 CP/XT Features N/A $843 $1,128 $1,400 $1,877 $2,914 $3,664 $3,664 Note: List price deduct Separately Ventilated - For applications where ventilated air is piped into the machine from an external source, basic DPG-FV enclosures may be separately ventilated at 3, 9 and 12 o clock for the above list price deductions, (FL180 ventilated at 12 o clock only, exit atmosphere). The inlet pipe can be fastened to one end bracket, and, if required and specified, an outlet pipe can be fastened to the other end bracket. Price does not include blower or pipe. Locations of air entry and air exhaust, if used, should be specified on order. Motors must not be operated without the separate air supply. Contact BaldorReliance for separate ventilating air requirements. (To insure adequate protection of a separately ventilated motor against loss of cooling air, an overtemperature device for interlocking with the controller overload protection circuit is recommended and should be added as standard practice. An air pressure differential switch is also recommended.) See pricing deduction chart below. Note: On stock motors, air entry must be opposite drive end of motor for proper thermostat protection of windings TEAO-Piggyback - For totally enclosed machines where blower motor must be on top or side of base motor housing, use the following pricing chart to add to TEAO inline price for top- or side-mounted blower and shroud for direct cooling air over base motor frame. Includes 3-phase 60 Hz 230/460 Volt AC Induction Motor. XT-Features (IP54) - (RL210 thru L440 frames) The BaldorReliance CP/XT Severe Duty motor is designed for operation in damp locations where the motor will be subjected to corrosive conditions. Typical applications are paper, chemical, petroleum, fertilizer and plastics industries. XT motors are provided in totally enclosed non-ventilated, totally enclosed fan-cooled and totally enclosed air-over construction. TEAO-BC will use an XT blower motor with longer blower housing than TEAO-BC standard. 4

8 CP/XT Motor Construction Includes the Following Features: Conduit box has pipe tab lead outlet. Neoprene gaskets on cover and box frame. Box construction is - Epoxy coated cast iron. (Mill type on L400 designs above 510 amps and all L440 frames). Shaft (in-board of bearing caps) painted with epoxy enamel. Stainless steel or neoprene slinger mounted on external shaft extensions. External fan on TEFC motors is plastic or epoxy coated cast iron Fan cover on TEFC motors is finished with epoxy enamel. Assembled motor with mounted accessories painted with epoxy enamel. Conduit box has pipe tab lead outlet. Neoprene gaskets on cover and box frame. Box construction is - Epoxy coated cast iron. (Mill type on L400 designs above 510 amps and all L440 frames). Bracket to frame rabbet fit sealed with special sealing compound. All hardware corrosion resistant. Motor accessories such as brakes must be specified and priced as totally enclosed construction for CP/XT motors. Motors located in damp, moist environments must have space heaters to protect against condensation when the motor is not operating. Motors operating in dirty areas with fine abrasive dust such as taconite surrounding the motor should have Dustproof/taconite features added in addition to this modification. M11 End Brackets All totally enclosed RPM AC 5 30HP are stocked with a C-Face per 501 catalog as noted. NEMA C-Face or D-Flange bracket with standard dimensions and feet. Special Seals required when oil will be around the shaft. C-Face available on frames FL180C thru L360C only. D-Flange only available on DPFV RL210 - L440 frames. Note: Since RPM AC motors are designed for maximum horsepower per frame size, it is important to state the specific NEMA C-Face or D-Flange and shaft diameter required for mounting, when motor will be mounted to a reducer. Type C-FACE $550 $577 $577 $690 $862 $1,390 N/A N/A D-FLANGE N/A $1,070 $1,366 $1,562 $2,482 $3,159 $4,108 $4,108 Important: Motor C-Face is intended for mounting auxiliary equipment such as pumps, gears, etc. When mounted horizontally, frames L280C thru L360C & L400D thru L440D must be supported by the feet and not by the C-Face or D-Flange alone. Note: Prices above cover only a bracket change with no shaft changes. To supply smaller than standard diameter and/or length, add the following: (FL/RL210 - L280 $490 LIST); (L320 - L440 $970 LIST) M12 Feedback Devices Stock Encoder Kits (Price Includes Encoder plus all Mounting Hardware and Mating Connector) See encoder mounting on page 9 for assembly price. See 501 Catalog for encoder kit pricing. 5

9 M13 Encoder Mounting Mounting of Stock Encoder Kits Mounting of Encoder Kits $358 $358 $389 $389 $389 $389 $519 $714 to RPM AC Motors See stock kits above or in the 501 catalog M13.1 Encoder Mounting Special Mounting of Customer Supplied 56 C-Face or other Encoder M13.2 Encoder/Resolver Mounting Provisions Only Mounting of Customer Supplied All Frames $3, C-Face or other Encoder Includes mounting and all mounting hardware. Note: May require TEAO-Piggyback blower on TEAO -in-line blowercooled designs. Contact BaldorReliance for assistance. PROVISION - APPLICABLE TO TENV, DPFV, DPSV, and TEAO-PIGGYBACK ENCLOSURES. Requires specific brand and part number of feed back device with order entry. List Price Machined motor bracket and counter bore of opposite drive end shaft only. Standard On FL180-L440 frames STD. Machined motor bracket and stub shaft with protective cover over stub shaft. $806 Machined motor bracket, cast iron adapter, and stub shaft for mounting of any feedback device with 56 C-Face or other encoder. $1,924 Machined motor bracket, cast iron adapter, stub shaft and coupling for mounting of any feedback device with 56 C-Face or other encoder. $2,238 PROVISION - APPLICABLE TO TEFC ENCLOSURES. Requires specific brand and part number of feedback device with order entry. List Price Counter bore of opposite drive end shaft. STD. Adapter, stub shaft and coupling - for future mounting of any feedback device with 56 C-Face. $2,238 M14 Filter Kits Filters Catalog Number Kit Price $658 $658 $658 $658 $658 $825 $1,214 $1,801 * Installed Price $1,036 $1,036 $1,036 $1,036 $1,036 $1,271 $1,709 $2,396 *124 is a Square Replaceable Polyester Type 6

10 M15 Insulation Insulation System Mod. Tropical Protection Add 5% of Basic Motor Minimum $300 Net Standard RPMAC motors utilize an advanced insulation system that provides excellent protection against fungus and high humidity as found in tropical climates. The standard motor is suitable for operation in tropical climates without additional treatment. For additional protection, especially during shipment and prolonged storage, this modification provides a fungicidal air dry varnish treatment per MIL-V-173C (Type I Treatment) applied over all motor windings. Note: Motors applied in highly corrosive, moist and dirt-laden environments should have an enclosure with XT Dirty / Duty features to limit the entrance of contaminants into the motor. M16 Lubrication Grease Fittings Automatic Grease Relief Fittings - Add $54 List Price - all frames 2 Fittings The frame RPMAC motors come standard with a Permanently lubricated bearing system (Lubricated for the bearing life). Larger frames comes with the PLS bearing system which has regressing provisions with alemite fittings as standard. M17 Nameplate Nameplate Change Rerate of Stock Motors Separate Nameplate for Customer Data M18 Packaging M19 Paint Packaging Modification Add $183 List Price - all frames Add $183 List Price - all frames Export Boxing $1,231 $1,231 $1,231 $1,489 $1,555 $1,555 $3,754 $3,754 For ocean freight shipment. Does not include broker fees, customs, documentation, etc. Paint Modification Special Paint-Factory $389 $389 $389 $389 $389 $648 $907 $1,328 Supplied Special color or type of paint. Supply Federal Standard, RAL number or paint chip with order. Special color or type of paint must be compatible with our standard air dry primer. 7

11 M20 Service Factor Standard listed motors are for 1.0 service factor. For greater than standard service factor, use the price of the listed machine with the same enclosure and speed with a horsepower rating equal to the rated HP times the required service factor. If the HP thus calculated is not standard, use the next higher standard rating. See nameplate for rerate. Note: Oversizing the inverter may increase the size of the Variable Frequency Controller. M21 Shaft Modifications & Seals Shaft Modification Shaft Modifications Shaft Seal Modification See CA400 Price Catalog Slinger- V-Ring $31 $42 $62 $72 $86 $101 $134 $147 This Forsheda rotating seal protects the bearing from oil splash and dust contamination. Lip Seal $681 $810 $810 $810 $810 $1,684 $1,684 $1,684 This modification provides a lip seal on the drive end to protect the bearing when operated with oil splashing against the shaft. Typical application is on a horizontal motor mounted to a gear case where the stationary oil level is below the motor shaft. List price is per bearing. Caution: Seals operated dry for extended periods will be damaged. M22 Space Heaters Modification Space Heaters $476 $476 $476 $731 $731 $731 $1,366 $1,366 Auxiliary Conduit Box $619 $619 $619 $619 $619 $619 $725 $725 Mounted inside the motor. Recommended to prevent condensation of moisture for motors remaining unenergized for long periods of time. Standard heater is single phase 120, 240, or 480 volts, 50/60 Hz. Leads are terminated in motor conduit box unless modification for Separate Auxilary Conduit Box for Space Heater Leads is specified. 8

12 M23 Terminal Blocks Terminal Board in Main Conduit Box Main Terminal Board (1) $505 $505 $634 $823 $1,088 $1,348 $1,774 $1,774 Accessory Terminal Block (2) $183 $183 $183 $183 $183 $183 $183 $183 (1) Provides terminal block in conduit box for connection of RPMAC motor power leads, instead of the standard leads with terminal lugs. Thermostat leads will not be connected to the terminal block. (2) Provides terminal block in auxiliary conduit box for connection of pulse tachometer or digital encoder. Requires auxiliary conduit box - see conduit box tab. M24 Tests As standard practice, every RPM AC motor is full load check tested on a dynamometer with a PWM power supply, and receives a Routine Test per IEEE 112 modified for inverter power supply. Tests Routine Test with Report (1) All Frames $114 Routine Test Witnessed $714 $714 $951 $1,188 $1,426 $1,663 $1,900 $2,138 Complete Test (2) $2,459 $2,459 $3,799 $3,799 $5,580 $6,115 $6,910 $8,465 Complete Test (2) Witnessed $8,318 $8,318 $9,595 $9,595 $9,595 $9,595 $9,595 $13,590 (1) Certified Routine Test Report per IEEE 112 modified for inverter power (2) Complete test provides complete performance test and heat run on PWM inverter power per IEEE 112 modified for operation on an inverter. 9

13 BALDOR SALES OFFICES EDMONTON VANCOUVER WINNIPEG PORTLAND TORONTO MINNEAPOLIS MILWAUKEE MONTREAL CHICAGO AUBURN SALT LAKE CITY DETROIT DES MOINES BOSTON CLEVELAND WALLINGFORD DENVER KANSAS CITY PITTSBURGH NEW YORK HAYWARD INDIANAPOLIS PHILADELPHIA ST LOUIS CINCINNATI BALTIMORE TULSA MEMPHIS LOS ANGELES GREENSBORO CLARKSVILLE FORT PHOENIX SMITH ATLANTA DALLAS HOUSTON DISTRICT OFFICE MONTERREY & WAREHOUSES TAMPA UNITED STATES ARIZONA PHOENIX 4211 S 43RD PLACE PHOENIX, AZ PHONE: FAX: LEON GUADALAJARA MEXICO CITY ARKANSAS CLARKSVILLE 706 WEST MAIN STREET CLARKSVILLE, AR PHONE: FAX: CALIFORNIA LOS ANGELES 6480 FLOTILLA STREET COMMERCE, CA PHONE: FAX: HAYWARD FORBES STREET HAYWARD, CA PHONE: FAX: COLORADO DENVER 3855 FOREST STREET DENVER, CO PHONE: FAX: CONNECTICUT WALLINGFORD 65 SOUTH TURNPIKE ROAD WALLINGFORD, CT PHONE: FAX: FLORIDA TAMPA/PUERTO RICO/ VIRGIN ISLANDS 3906 EAST 11TH AVENUE TAMPA, FL PHONE: FAX: GEORGIA ATLANTA 62 TECHNOLOGY DRIVE ALPHARETTA, GA PHONE: FAX: ILLINOIS CHICAGO 340 REMINGTON BLVD. BOLINGBROOK, IL PHONE: FAX: INDIANA INDIANAPOLIS 5525 W. MINNESOTA STREET INDIANAPOLIS, IN PHONE: FAX: IOWA DES MOINES 1943 HULL AVENUE DES MOINES, IA PHONE: FAX: MARYLAND BALTIMORE 6660 SANTA BARBARA RD. SUITES ELKRIDGE, MD PHONE: FAX: MASSACHUSETTS BOSTON 6 PULLMAN STREET WORCESTER, MA PHONE: FAX: MICHIGAN DETROIT 5993 PROGRESS DRIVE STERLING HEIGHTS, MI PHONE: FAX: MINNESOTA MINNEAPOLIS GEORGE WEBER DR, SUITE 400 ROGERS, MN PHONE: FAX: MISSOURI ST LOUIS LAKEFRONT DRIVE EARTH CITY, MO PHONE: FAX: KANSAS CITY 1501 BEDFORD AVENUE NORTH KANSAS CITY, MO PHONE: FAX: NEW YORK AUBURN ONE ELLIS DRIVE AUBURN, NY PHONE: FAX: NORTH CAROLINA GREENSBORO 1220 ROTHERWOOD ROAD GREENSBORO, NC PHONE: FAX: OHIO CINCINNATI 2929 CRESCENTVILLE ROAD WEST CHESTER, OH PHONE: FAX: CLEVELAND 8929 FREEWAY DRIVE MACEDONIA, OH PHONE: FAX: OKLAHOMA TULSA 5555 E. 71ST ST., SUITE 9100 TULSA, OK PHONE: FAX: OREGON PORTLAND SE CAPPS ROAD CLACKAMAS, OR PHONE: FAX: PENNSYLVANIA PHILADELPHIA 1035 THOMAS BUSCH MEMORIAL HIGHWAY PENNSAUKEN, NJ PHONE: FAX: PITTSBURGH 159 PROMINENCE DRIVE NEW KENSINGTON, PA PHONE: FAX: TENNESSEE MEMPHIS 4000 WINCHESTER ROAD MEMPHIS, TN PHONE: FAX: TEXAS DALLAS TH STREET SUITE 100 GRAND PRAIRIE, TX PHONE: FAX: HOUSTON W. LITTLE YORK ROAD SUITE 300 HOUSTON, TX PHONE: FAX: UTAH SALT LAKE CITY 2230 SOUTH MAIN STREET SALT LAKE CITY, UT PHONE: FAX: WISCONSIN MILWAUKEE 1960 SOUTH CALHOUN ROAD NEW BERLIN, WI PHONE: FAX: INTERNATIONAL SALES FORT SMITH, AR P.O. BOX 2400 FORT SMITH, AR PHONE: FAX: CANADA EDMONTON, ALBERTA STREET EDMONTON, ALBERTA T6E 6R8 PHONE: FAX: TORONTO OAKVILLE, ONTARIO 2750 COVENTRY ROAD OAKVILLE, ONTARIO L6H 6R1 PHONE: FAX: MONTREAL, QUEBEC 5155 J-ARMAND BOMBARDIER SAINT-HUBERT, QUÉBEC CANADA J3Z 1G4 PHONE: FAX: VANCOUVER, BRITISH COLUMBIA 1538 KEBET WAY PORT COQUITLAM, BRITISH COLUMBIA V3C 5M5 PHONE FAX: WINNIPEG, MANITOBA 54 PRINCESS STREET WINNIPEG, MANITOBA R3B 1K2 PHONE: FAX: MEXICO LEON, GUANAJUATO KM. 2.0 BLVD. AEROPUERTO LEON, GUANAJUATO, CP37545 MEXICO PHONE: FAX: Baldor Electric Company P.O. Box 2400 Fort Smith, AR U.S.A. Ph: (479) Fax (479) International Fax (479) Baldor Electric Company CA401 All Rights Reserved. Printed in USA. 9/12

RPM AC Inverter Duty Stock Motor Mod Express. CA401 Effective Date: January 2, 2011

RPM AC Inverter Duty Stock Motor CA401 Effective Date: January 2, 2011 Modification Section for RPM AC Motors RPM AC Frames FL180 through L440 How to Price an Order 1. Find the basic list price of the