POWER OPTIMIZIER. (+34) Skype

Transcription

1 Skype (+34) POER OPTIMIZIER The SolarEdge module add-on power optimizer is connected by installers to the solar modules. Ease of installation is completed by simply clipping the power optimizer to the module frame or by attaching it to the rail with a single screw. P-S e rie s Mo dule Add-On Powe r Optimize rs Connected by installers to the PV module and compatible with a wide range of modules Optimizer P Model Voc 1 / 5

2 P P P P P < 48 V < V < 80 V < 80 V * Also available with frames mounted in < 125 advance for V quicker installation. P-S e rie s Co mme rcial Powe r Optimize r Commercial solution connecting two modules per power optimizer Optimizer Model Voc P0 0* < 96 V P * < 125 V * Rated combined STC power of 2 modules connected in series. of up to +5% power tolerance allowed. * Also available with frames mounted in advance for quicker installation. Fe ature highlights: Per-module Point Tracking (MPPT) Superior efficiency (99.5% peak efficiency, 98.8% weighted efficiency) Mitigates all types of modules mismatchloss, from manufacturing tolerance to partial shading Designed for extreme environmental conditions 25 year reliability and warranty Advanced, real-time performance measurement Automatic module DC voltage shut-down for installer and firefighter safety Independent optimization technology (IndOP ) - allows operation with any inverter and requires no additional interface hardware Available with frames mounted in advance for quicker installation SPEDIFICATIONS 2 / 5

3 P300 P350 P500 P404 P405 P0 P700 /72 96 /72 Thin Film 2 x 2 x 72 INPUT Rated Input DC (1) Absolute Input (Voc at lowest temperature) Vdc MPPT Operating Range Vdc Continuous Input Current (Isc) Efficiency eighted Efficiency Overtoltage Category Adc ,1 % 99,5 % 98,8 II OUTPUT DURING OPERATION (POER OPTIMIZER CONNECTED TO OPERATING S OLAREDGE INVERTER) Current Adc 15 Vdc 85 OUTPUT DURING S TANDBY (POER OPTIMIZER DIS CONNECTED FROM S OLAREDGE INVERTER OR S OLAREDGE INVERTER OFF) Safety per Optimizer Vdc 1 S TANDARD COMPLIANCE EMC FCC Part15 Class B, IEC , IEC Safety IEC (class II safety), UL1741 RoHS Yes Fire Safety VDE-AR-E : INS TALLATION S PECIFICATIONS Compatible SolarEdge Inverters Allowed System Single Phase Vdc phases 3 / 5

4 Dimensions ( x L x H) mm 27,5 139 x 165 x 139 x x63 eight (including cables) Input Connector Connector ire Operating Temperature Range Protection Rating Relative Humidity gr MC4 (2) MC4 m 0,95 1,2 1,8 2,1 º C IP68 / NEMA6P % (1) Rated STC power of the module. of up to +5% power tolerance allowed. (2) For other connector types please contact SolarEdge. (3) For ambient temperature above +70 C / +158 F power de-rating is applied. Refer to Optimizers Temperature De-Rating Application Note for more details. PV S YS TEM DES IGN (4)(5) S ingle Phase S E15K & large r S E16K & large r S E33.3K Minimum String ( Optimizers) P300, P350, P500 P404, P P0 - P String ( Optimizers) P300, P350, P500, P404, P500 P0, P ( 30 ( 30 ( per String (6) (7) Parallel Strings of Different s or Orientations Sí Sí Sí Sí (4) It is not allowed to mix P404/P405 with P300/P350/P500/P0/P700 in one string.. It is not allowed to mix P0/P700 with P300/P350/P404/P405/P500 in one string P0 and P700 can be mixed in one string. 4 / 5

5 (5) In a case of odd number of PV s in one string it is allowed to install one P0/P700 power optimizer connected to one PV. ( 6 ) For SE27.6K: It is allowed to install up to 13,500 per string when 3 strings are connected to the inverter and when the maximum power difference between the strings is up to 2,000; inverter max DC power: 37,250. ( 7 ) PFor SE33.3K: It is allowed to install up to 15,000 per string when 3 strings are connected to the inverter and when the maximum power difference between the strings is up to 2,000; inverter max DC power: 45, / 5