MODEL MMC8A-1 MMC8A-2 MMC8A-3 V1 +5V 1.2A +5V 1.1A +5V 1.2A DC OUTPUT V2 +12V 0.1A +15V 0.1A +12V 0.1A V3-12V 0.1A -15V 0.1A -5V 0.
|
|
|
- Letitia Perkins
- 5 years ago
- Views:
Transcription
1 Unit type 8A Ordering information 8A -1 -O R 1Series name 2Output wattage 3Output voltage combination 4Optional G :Low leakage current N :with Cover MODEL 8A-1 8A-2 8A-3 V1 +5V 1.2A +5V 1.1A +5V 1.2A DC OUTPUT V2 +12V 0.1A +15V 0.1A +12V 0.1A V3-12V 0.1A -15V 0.1A -5V 0.1A SPECIFICATIONS MODEL 8A-1 8A-2 8A-3 VOLTAGE[V] AC f or DC CURRENT[A] ACIN 100V 0.3typ (Io=100%) INPUT FREQUENCY[Hz] or DC EFFICIENCY[%] ACIN 100V 68typ (Io=100%) INRUSH CURRENT[A] ACIN 100V 20typ (Io=100%) VOLTAGE[V] CURRENT[A] MINIMUM CURRENT[A] LINE REGULATION[mV] 20max 48max 48max 20max 60max 60max 20max 48max 20max LOAD REGULATION[mV] 60max 120max 120max 60max 150max 150max 60max 120max 100max OUTPUT RIPPLE[mVp-p] *1 80max 120max 120max 80max 120max 120max 80max 120max 120max RIPPLE NOISE[mVp-p] *1 120max 150max 150max 120max 150max 150max 120max 150max 150max TEMPERATURE REGULATION[mV] 0to +50C 50max 350max 350max 50max 350max 350max 50max 350max 350max START-UP TIME[ms] 100max (ACIN 85V, Io=100%) HOLD-UP TIME[ms] 15typ (ACIN 85V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed Fixed Fixed Fixed Fixed Fixed OUTPUT VOLTAGE SETTING[V] xx to to xx to to xx to to PROTECTION CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically INPUT-CASE, OUTPUT AC2,000V 1minute, DC500V 50MWmin (At Room Temperature) ISOLATION OUTPUT-CASE AC500V 1minute, DC500V 50MWmin (At Room Temperature) OUTPUT-OUTPUT(V1-V2,V3) AC100V 1minute, DC100V 10MWmin (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE 0to +65C, 20-90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20-90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 10-55Hz, 19.6m/s 2 (2G), 3minutes period, 30minutes each along X, Y and Z axis IMPACT 98.0m/s 2 (10G), 20ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL , C-UL Complies with DEN-AN NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-B *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). * When units are operated with chassis and cover, derating is required. * Avoid prolonged use under over-load. B-36
2 8A External view I/O Connector CN1 Mating Connector Terminal Chain : CN Loose : (Mfr : Molex) Performance data STATIC CHARACTERISTICS (8A-1) RISE TIME & FALL TIME (8A-1) OVERCURRENT CHARACTERISTICS (8A-1) DERATING CURVE B-37
3 Unit type 50A Ordering information 50A -1 -O R 1Series name 2Output wattage 3Output voltage combination 4Optional C :with Coating G :Low leakage current J :Connector type N :with Cover MODEL 50A-1 50A-2 50A-3 50A-4 V1 +5V 5.0A +5V 5.0A +5V 5.0A +5V 7.0A DC OUTPUT V2 +12V 1.5(Peak 2.0)A +15V 1.2A +12V 1.5(Peak 2.0)A +12V 1.0(Peak 1.5)A V3-12V 0.5A -15V 0.5A -5V 0.5A -12V 0.3A SPECIFICATIONS MODEL 50A-1 50A-2 50A-3 50A-4 VOLTAGE[V] AC f or DC CURRENT[A] ACIN 100V 1.5typ (Io=100%) INPUT FREQUENCY[Hz] or DC EFFICIENCY[%] ACIN 100V 70typ (Io=100%) INRUSH CURRENT[A] ACIN 100V 30typ (Io=100%) (At cold start) VOLTAGE[V] CURRENT[A] * (Peak2) (Peak2) (Peak1.5) 0.3 MINIMUM CURRENT[A] LINE REGULATION[mV] 20max 48max 100max 20max 60max 60max 20max 48max 20max 20max 48max 48max LOAD REGULATION[mV] 40max 150max 150max 40max 150max 150max 40max 150max 100max 40max 150max 150max OUTPUT RIPPLE[mVp-p] *2 80max 120max 120max 80max 120max 120max 80max 120max 120max 80max 120max 120max RIPPLE NOISE[mVp-p] *2 120max 150max 150max 120max 150max 150max 120max 150max 150max 120max 150max 150max TEMPERATURE REGULATION[mV] 0to +50C 50max 350max 350max 50max 350max 350max 50max 350max 350max 50max 350max 350max START-UP TIME[ms] 100max (ACIN 85V, Io=100%) HOLD-UP TIME[ms] 15typ (ACIN 85V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed OUTPUT VOLTAGE SETTING[V] xx to to xx to to xx to to xx to to PROTECTION OVERCURRENT PROTECTION Works over 105% of rating (V2 works at peak current) and recovers automatically CIRCUIT OVERVOLTAGE PROTECTION Works at % of rating (+5V) INPUT-CASE, OUTPUT AC2,000V 1minute, DC500V 50MWmin (At Room Temperature) ISOLATION OUTPUT-CASE AC500V 1minute, DC500V 50MWmin (At Room Temperature) OUTPUT-OUTPUT(V1-V2,V3) AC100V 1minute, DC100V 10MWmin (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE 0to +65C, 20-90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20-90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 10-55Hz, 19.6m/s 2 (2G), 3minutes period, 30minutes each along X, Y and Z axis IMPACT 196.1m/s 2 (20G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL , C-UL Complies with DEN-AN NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 Peak current for 30 seconds. *2 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). * When units are operated with chassis and cover, derating is required. * Avoid prolonged use under over-load. B-38
4 50A External view I/O Connector CN1 Mating Connector Terminal Chain : CN Loose : (Mfr : Molex) Use J cover for connector type. Connector type Barrier strip type Performance data STATIC CHARACTERISTICS (50A-1) RISE TIME & FALL TIME (50A-1) OVERCURRENT CHARACTERISTICS (50A-1) DERATING CURVE B-39
5 Unit type 75A Ordering information 75A -1 -O R 1Series name 2Output wattage 3Output voltage combination 4Optional C :with Coating G :Low leakage current J :Connector type N :with Cover MODEL 75A-1 75A-2 75A-3 75A-4 V1 +5V 8.0A +5V 8.0A +5V 8.0A +5V 6.0A DC OUTPUT V2 +12V 2.5A +15V 1.8A +12V 2.5A +12V 3.2A V3-12V 0.5A -15V 0.5A -5V 0.5A -12V 0.5A SPECIFICATIONS MODEL 75A-1 75A-2 75A-3 75A-4 VOLTAGE[V] AC f or DC CURRENT[A] ACIN 100V 2.1typ (Io=100%) INPUT FREQUENCY[Hz] or DC EFFICIENCY[%] ACIN 100V 75typ (Io=100%) INRUSH CURRENT[A] ACIN 100V 20typ (Io=100%) VOLTAGE[V] CURRENT[A] MINIMUM CURRENT[A] LINE REGULATION[mV] 20max 48max 48max 20max 60max 60max 20max 48max 20max 20max 48max 100max LOAD REGULATION[mV] 40max 100max 150max 40max 120max 150max 40max 100max 100max 40max 100max 150max OUTPUT RIPPLE[mVp-p] *1 80max 120max 120max 80max 120max 120max 80max 120max 120max 80max 120max 120max RIPPLE NOISE[mVp-p] *1 120max 150max 150max 120max 150max 150max 120max 150max 150max 120max 150max 150max TEMPERATURE REGULATION[mV] 0to +50C 50max 120max 350max 50max 150max 350max 50max 120max 350max 50max 120max 350max START-UP TIME[ms] 200max (ACIN 85V, Io=100%) HOLD-UP TIME[ms] 15typ (ACIN 85V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed OUTPUT VOLTAGE SETTING[V] xx to to xx to to xx to to xx to to PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT OVERVOLTAGE PROTECTION Works at % of rating (+5V) INPUT-CASE, OUTPUT AC2,000V 1minute, DC500V 50MWmin (At Room Temperature) ISOLATION OUTPUT-CASE AC500V 1minute, DC500V 50MWmin (At Room Temperature) OUTPUT-OUTPUT(V1-V2,V3) AC100V 1minute, DC100V 10MWmin (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE 0to +65C, 20-90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20-90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 10-55Hz, 19.6m/s 2 (2G), 3minutes period, 30minutes each along X, Y and Z axis IMPACT 196.1m/s 2 (20G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL , C-UL Complies with DEN-AN NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). * When units are operated with chassis and cover, derating is required. * Avoid prolonged use under over-load. B-40
6 75A External view I/O Connector CN1 Mating Connector Terminal Chain : CN Loose : (Mfr : Molex) Use J cover for connector type. Connector type Barrier strip type Performance data STATIC CHARACTERISTICS (75A-4) RISE TIME & FALL TIME (75A-4) OVERCURRENT CHARACTERISTICS (75A-4) DERATING CURVE B-41
7 Unit type 100A Ordering information 100A -1 -O R 1Series name 2Output wattage 3Output voltage combination 4Optional C :with Coating G :Low leakage current J :Connector type N :with Cover MODEL 100A-1 100A-2 100A-3 100A-4 V1 +5V 13.0A +5V 13.0A +5V 13.0A +5V 8.0A DC OUTPUT V2 +12V 2.0A +15V 1.5A +12V 2.0A +12V 4.0A V3-12V 1.0A -15V 1.0A -5V 1.0A -12V 1.0A SPECIFICATIONS MODEL 100A-1 100A-2 100A-3 100A-4 VOLTAGE[V] AC f or DC CURRENT[A] ACIN 100V 2.8typ (Io=100%) INPUT FREQUENCY[Hz] or DC EFFICIENCY[%] ACIN 100V 75typ (Io=100%) INRUSH CURRENT[A] ACIN 100V 25typ (Io=100%) VOLTAGE[V] CURRENT[A] MINIMUM CURRENT[A] LINE REGULATION[mV] 20max 48max 48max 20max 60max 60max 20max 48max 20max 20max 48max 100max LOAD REGULATION[mV] 40max 100max 150max 40max 120max 150max 40max 100max 100max 40max 100max 150max OUTPUT RIPPLE[mVp-p] *1 80max 120max 120max 80max 120max 120max 80max 120max 120max 80max 120max 120max RIPPLE NOISE[mVp-p] *1 120max 150max 150max 120max 150max 150max 120max 150max 150max 120max 150max 150max TEMPERATURE REGULATION[mV] 0to +50C 50max 120max 350max 50max 150max 350max 50max 120max 350max 50max 120max 350max START-UP TIME[ms] 200max (ACIN 85V, Io=100%) HOLD-UP TIME[ms] 15typ (ACIN 85V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed OUTPUT VOLTAGE SETTING[V] xx to to xx to to xx to to xx to to PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT OVERVOLTAGE PROTECTION Works at % of rating (+5V) INPUT-CASE, OUTPUT AC2,000V 1minute, DC500V 50MWmin (At Room Temperature) ISOLATION OUTPUT-CASE AC500V 1minute, DC500V 50MWmin (At Room Temperature) OUTPUT-OUTPUT(V1-V2,V3) AC100V 1minute, DC100V 10MWmin (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE 0to +65C, 20-90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20-90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 10-55Hz, 19.6m/s 2 (2G), 3minutes period, 30minutes each along X, Y and Z axis IMPACT 196.1m/s 2 (20G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL , C-UL Complies with DEN-AN NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). * When units are operated with chassis and cover, derating is required. * Avoid prolonged use under over-load. B-42
8 100A External view I/O Connector CN1 Mating Connector Terminal Chain : CN Loose : (Mfr : Molex) Connector type Barrier strip type Performance data STATIC CHARACTERISTICS (100A-4) RISE TIME & FALL TIME (100A-4) OVERCURRENT CHARACTERISTICS (100A-4) DERATING CURVE B-43
MODEL LEP100F-24 LEP100F-36 LEP100F-48 DC OUTPUT +24V 4.2(Peak 7)A +36V 2.8(Peak 4.7)A +48V 2.1(Peak 3.5)A
AC-DC Power Supplies Open Frame/ Enclosed type 00F Ordering information 00 F -2 -O 2 3 R Recommended EMI/EMC Filter NAC-06-72 High voltage pulse noise type : NAP series Low leakage current type : NAM series
SUC W 1R B P -O
DC-DC Converters PCB Mount Type SUCWR5 Ordering information SUC W R5 2 2 B P -O 2 3 4 5 6 8 R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing
MODEL TUNS50F05 TUNS50F12 TUNS50F24 VOLTAGE[V]
![MODEL TUNS50F05 TUNS50F12 TUNS50F24 VOLTAGE[V]](/thumbs/80/80423684.jpg "MODEL TUNS50F05 TUNS50F12 TUNS50F24 VOLTAGE[V]")
AC-DC Power Supplies Bus Converter. Power Module Type 50F Ordering information TUN S 50 F 05 -O 1 2 3 5 6 * Providing heat sink as option 1 Series name 2 Single output 3 Output wattage Universal Input
<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost
SERIES Board type, ultra-small size, and low cost Ordering Information Switching power supplies General Description 2. Allowable Input Voltage Range AC85
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current [A] Rated input fuse Inrush current protection circuit Material PCB/Pattern Single sided
Basic Characteristics Data
PLA Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current [A] Rated input fuse Inrush current protection circuit Material PCB/Pattern Single
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current *1 [A] Inrush current protection Material PCB/Pattern Single sided Double sided Series/Parallel
5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]
![5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]](/thumbs/83/87221273.jpg "5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]")
R AC-DC Power Supplies Configurable type series Ordering information ACO - OOOOOO- OO- OO 6 7 8 9 Recommended EMI/EMC Filter F AC-6-7 F AC--7 6F AC--7 9F AC--7 High voltage pulse noise type : AP series
5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]
![5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]](/thumbs/84/90972835.jpg "5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]")
Recommended EMI/EMC Filter ACEF AC-6-7 ACEF AC--7 ACE6F AC--7 ACE9F AC--7 High voltage pulse noise type : AP series ow leakage current type : AM series *The EMI/EMC Filter is recommended *to connect with
RWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency
SERIES (DC/DC) "TESLA Converter" (next-generation power supply) adopted : ultra small size and super high efficiency.chassis module/open-frame type Super high efficiency 94.5 to 96.5% (typical) Ordering
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model 1F 15F 2F 3F Circuit method Switching frequency [khz] Active filter 6 Forward converter 13 Active filter 6 Forward converter 13 Active filter
Power Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs.
Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module
POWER-WIN TECHNOLOGY CORP.
atts Dual to Quad Output FEATURES Build-in active PFC function, PF > 0.9 Compact design for multiple outputs Dual to Quad output, Flexible DC output combination from 3.3V to 48V 2 year warranty ELECTRICAL
1 Terminal Block A-22
1 Terminal Block A-22 2 Function 2.1 Input voltage range 2.2 Inrush current limiting 2.3 Overcurrent protection 2.4 Overvoltage protection 2.5 Thermal protection 2.6 Output voltage adjustment 2.7 Remote
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current [A] Rated input fuse Inrush current protection circuit Material PCB/Pattern Single sided
DC9~ typ max 40max 80max. 71 typ max. 120max 120max. 120max. 120max. 60max. 48max. 20max
ZU SERIES DC/DC CONVERTER ZUS1R R Thin profile Isolated between input-output Built-in overcurrent protection circuit UL recognized, TÜV approved, CSA certified Five-year warranty ORDERING INFORMATION ZUS1R120
PS6R 480W Switching Power Supply
ew Series PS6R 4W Switching Power Supply Reduced size and high efficiency cuts operating costs. Energy-saving 93% Efficiency Space-saving 85mm wide Efficiency (%) 96 94 92 88 86 84 82 Competitor A Competitor
POWER-WIN TECHNOLOGY CORP.
FEATURES Medical 60601-1 3.1 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
TDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
UNA SERIES Embedded Power Supply Features Model naming method UNA 350P / Applications UNA Conformity to RoHS Directive Product Line-up
SERIES 350PB, PN 350PB/350PN Specifications CH 2 3 5 Voltage Range (*)(*8) V AC85-265 (AC85-5 : Need output derating) Frequency (*)(*8) Hz 7-63 Power Factor (00/20VAC)(typ) (*5) 0.98 / 0.92 (Ta=25) Input
UL8750 EN EN UL1310 EN61547 EN55015 EN EN EN Last update: 16 June 2016 Page: 1 of 6
Constant Current & Constant Voltage LED Power Supply Product description This series was designed for compromise between an attractive price and high performance, which meets SELV standard of preventing
TDK-Lambda ZWS300BAF/A
ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4
Isolated and rugged 24 Vdc power for battery powered electronic control systems on rail equipment
TECHNICAL DATASHEET #TDAX083200 Isolated 110Vdc/24Vdc Converter 110V, 96V or 72Vdc Nominal Input Optional Enable Input 24Vdc Output, 240W P/N: AX083200 or AX083201 or AX083202 Isolated and rugged 24 Vdc
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model GHA3F GHA5F Circuit method Switching frequency [khz] boost chopper 6-22 LLC resonant converters 9-1 boost chopper 6-22 LLC resonant converters
DC/DC converter SINGLE OUTPUT
DC/DC converter SINGLE OUTPUT SOPHISTICATED DC/DC TOPOLOGY! η = 94%!! DC/DC high efficiency module Wide Input range Various output voltages High output current High efficiency up to 94% Approved: UL60950,
LS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
Proud UK distributor for Self Electronics
Proud UK distributor for Self Electronics Constant Current & Constant Voltage LED Power Supply Product description This series was designed for compromise between an attractive price and high performance,
Open Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
PRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.
0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:
ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
GB60S 60W Single Output General Purpose Series
Features 2 x 3 x 1.0 Package Operates to 80 C Ambient For 1U Applications 60W convection cooled Universal Input 90-264Vac Optional Power ON LED Approved to CSA/EN/IEC/UL60950-1, 2 nd Edition Efficiency
UCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet
Combined Power Supply & Battery Charger Data Sheet INTRODUCTION UCS-CHR24V55W is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range
ORIENT Electronics. FDR Series, JSF Series CSF Series, NCSF Series DC-DC Converter, Noise filter. Innovation and Reliability.
ORIENT Electronics Innovation and Reliability FDR Series, JSF Series CSF Series, NCSF Series DC-DC Converter, Noise filter www.orientelec.co.kr FDR Series Compact Size Universal AC input full range Installation
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model EA12F NA12F EA24F NA24F Circuit method Switching frequency [z] Active filter 4-1 Flyback converter 2-15*2 Active filter 5-7 Forward converter
ZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current [A] Inrush current protection circuit Material PCB/Pattern Single sided Double sided Series/Parallel
MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
Ordering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES
Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current [A] Inrush current protection circuit Material PCB/Pattern Single sided Double sided Series/Parallel
Sorensen XG Series / XTR Series W A. 850 W, 1U Half Rack Programmable DC Power Supplies V
Sorensen XG Series / XTR Series 670 850 W 850 W, 1U Half Rack Programmable DC Power Supplies 6 600 V Highest Power Density Comprehensive Digital and Analog Interface Options Scalable, Multi-Unit Design
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
SELV IP30 (CCC optional)
Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP30 level, optional IP67 rating Typical
60W Single Output LED Power Supply. HBG-60 series. File Name:HBG-60-SPEC
Ⅱ { SPECIFICATION MODEL HBG-60-10 HBG-60-10 HBG-60-2 OUTPUT INPUT RATED CURRENT CURRENT ACCURACY EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT SHORT CIRCUIT PROTECTION OVER TEMPERATURE
INDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
Sorensen XG 1700 Series 1700 W A Watt, 1U Programmable DC Power Supplies V. Key Features. Key Modes
Sorensen XG 1700 Series 1700 W 1700 Watt, 1U Programmable DC Power Supplies 6 600 V Industry Leading Power Density Up to 1700 Watts in 1U Standard Digital Interfaces USB&RS232/485 LXI Ethernet and Isolated
UHP-200 series. 200W Slim Type with PFC Switching Power Supply. File Name:UHP-200-SPEC GB4943 EN EN UL IEC
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 000000000 GB494 UL950- EN950- EN5- IEC950- % - ~+ R SPECIFICATION MODEL UHP-00 -. UHP-00-4. UHP-00-5 UHP-00 - UHP-00-5 UHP-00-4 UHP-00-6
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
D R C- 4 0 s e r i e s
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /
Versatile and Rugged Industrial LIthium/LiPO Charger Series
Versatile and Rugged Industrial LIthium/LiPO Charger Series Description The M-series is an environmentally robust and sophisticated battery chargers with models supporting Lithium or LiPo batteries. With
EN UL8750 EN UL1310 EN61547 EN55015 EN EN EN62384 Last update: 16 June 2016 Page: 1 of 6
Constant Current & Constant Voltage LED Power Supply Product description This series was designed for compromise between an attractive price and high performance, which meets SELV standard of preventing
MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
IS 15885(Part 2/Sec13) R ( for 24V only)
THOMAS SAMUEL THOMAS SAMUEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g W Constant Voltage + Constant Current LED Driver 110 M IP67 Features Constant Voltage + Constant Current mode output Plastic
DC (on) LED Signal. Multiple output connector for easy wiring
DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage
UHP-500 series. 500W Slim Type with PFC Switching Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 500W Slim Type with PFC Switching Supply S&E GB4943 UL950- EN950- IEC950- % - ~+ Industrial automation machinery Industrial
UHP-350 series. 350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 50W Slim Type with PFC Switching Power Supply GB494 UL950-1 EN950-1 EN5-1 IEC950-1 - ~ Industrial automation machinery Industrial
Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W
2019-V1.0-0318 Specifications AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 350W Slim Type with PFC Switching Power Supply S&E GB4943 UL950-1 EN950-1 EN335-1 IEC950-1 % - ~+ Industrial automation machinery
SPECIFICATION FSP350-60APN(85) Bronze. (Erp2013) DATE:MAY, 14, 2013 表單編號 :7000P Page1
SPECIFICATION FSP350-60APN(85) Bronze (Erp2013) DATE:MAY, 14, 2013 REV:2 表單編號 :7000P-0105 Page1 TABLE OF CONTENTS PAGE 1. GENERAL REQUIREMENTS 3 2. INPUT REQUIREMENTS 3 3. OUTPUT REQUIREMENTS 3 3.1 Output
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model 1F 15F Circuit method Active filter Forward converter Active filter Forward converter Switching frequency [khz] 8 12 8 13 Input current *2 [A]
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] (reference) Input current [A] Inrush current protection PCB/Pattern *3 Material Single sided Double
Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Part Numbers
Standard Series Key features: Wide power range: 7.W-4W Universal input : 7.W-W: 8-264V /1-37V DC W: 8-2V /17-264V 24-37V DC (selectable) W, W, 24W: 8-264V /11-3V DC 4W: 3 phase: 32- V 3 phase: 3- V Overcurrent/overvoltage
Switching Power Supplies
Features Boxed Power Supplies with Screw Terminal Block Single- and Triple Output Models EMI Compliance with EN 55022 and FCC Part 15, Level B Short Cirquit Protection Overvoltage Protection High Efficiency
55GS1 DC/DC Converter
DC/DC Converter 25-Watt Ruggedized Converter Conduction-Cooled, Single Output Proudly made in the USA Description NAI s is a COTS, that accepts a +28 VDC input and provides a single full-power output at
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
1SVC F SVC F 0607 R100.20/30 R100.45
SIGMASWITCH Content Solid state relays Description, certificates, approvals... 163 Ordering details... 164 Technical data R111, R12x... 167 Technical data R100... 168 Technical data HDS R2... 169 Selection
Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
PRODUCT SPECIFICATION File: EA-400H2U-02 Date: Feb., 16, 2005
SWITCHING POWER SUPPLY Page: 1 of 1 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC OUTPUT CHARACTERISTICS
Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
PRODUCT SPECIFICATION File: EA- 400ET1-10 Date: Jul., 28, 2006
SWITCHING POWER SUPPLY Page: 1 of 5 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC OUTPUT CHARACTERISTICS
(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
Basic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model TUXS150F TUXS200F Circuit method Switching frequency [khz] Active filter 80-600 LLC resonant converter 100-300 Active filter 80-600 LLC resonant
CUS200M Series. Single Output 200 to 250W Medical & ITE Power Supplies. CUS200M Series 1. Specification
CUS200M Series www.emea.tdk-lambda.com/cus200m Single Output 200 to 250W Medical & ITE Power Supplies Features Benefits IEC 1-1 (2x MOPP) & IEC 950-1 Approvals Suitable for B & BF type Medical and ITE
Power Supplies. Automation & Sensing. Selection Guide
Automation & Sensing Selection Guide... 14 PS5R Slim Line Series... 141 Part Numbers... 142 Specifications... 143 Dimensions and Terminal Markings... 145 PS5R Standard Series... 147 Part Numbers... 147
PRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
Switching Power Supply
Switching Power Supply Easy-to-use Industrial Power Supply with Versatile Functions (); Power Supply Suitable for Peak Loads such as Motors and Solenoids (-P) Remote control function incorporated. Remote
LPF-25 series. 25W Constant Voltage + Constant Current LED Driver
F 110 M M SELV IP67 Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP67 level Typical
AC/DC Converter. Figure 1. Simplified Schematic. Figure 1. DMS-PS-CM Series Simplified Schematic
Universal Input 85-264Vac or 110-340Vdc OBSOLETE PRODUCT Contact Factory for Replacement Model FEATURES Up to 80% efficient single, dual, and tripleoutput model Individual, fully-isolated outputs: 3000Vac
VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
PRODUCT SPECIFICATION File: EA-600ETF-C10 Date: Mar. 29, 2010
SWITCHING POWER SUPPLY Full Range Rev.:C1.0 Page: 1 of 5 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC
(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
Video & Power Over Coax Kit
VPoC User Manual Video & Power Over Coax Kit 1CH Video Power over Coax w/ 12V DC Receiver Device VPoC24DC-01K VPoC24DC-01 N-42-1 x1 N-41C 4CH / 8CH / 16CH Video Power over Coax Server Kit VPoC24DC-04K
RWS-B Series. 50W to 600W Single Output General Purpose Power Supplies. RWS-B Series 1. Specification
RWS-B Series www.uk.tdk-lambda.com/rws-b 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 5 Year Warranty Global Safety Approvals Compact Size Benefits Better Field
AC-DC POWER SUPPLY SINGLE OUTPUT, DESK TOP, 130 WATTS MEDICAL APPLICATIONS MUIG130 SERIES
AC-DC POWER SUPPLY SINGLE OUTPUT, DESK TOP, 130 WATTS MEDICAL APPLICATIONS SERIES FEATURES Active PFC Function CEC Compliance RoHS Compliance Over Voltage Protection Built-in Over Current Protection Built-in
BITMAIN. APW PSU Series User Guide
BITMAIN APW5-12- 2600 PSU Series User Guide 1 Content 1. Overview... 3 2. Features... 3 3. Specifications... 4 4. Order Information & Wire Type... 6 5. Trouble Shooting & FAQ... 7 6. Precautions for Use...
ZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification
ZMS100 Series www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x
(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
Models. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery
AC/DC Battery Controller Power Supply TSPC-240UPS Series Compact universal 24 VDC power supply with integrated battery controller module Battery protection for over voltage, deep discharge, short circuit
PRODUCT SPECIFICATION File: EA-520H1U-01 Date: Apr., 7, 2005
SWITCHING POWER SUPPLY Page: 1 of 1 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 OUTPUT RIPPLE and NOISE 3 3.3 DYNAMIC DC OUTPUT CHARACTERISTICS 3 3.4 DC OUTPUT ON/OFF
ZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification (1)
www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x 4 inch footprint
EVS Series. 300 and 600W Constant Current Power Supplies. EVS Series 1. Specification
EVS Series www.emea.tdk-lambda.com/evs 300 and 600W Constant Current Power Supplies Features Benefits 300W Convection cooled and 600W fan model Silent fanless chargers CC (constant current) mode Quick
Basic Characteristics Data
asic haracteristics Data asic haracteristics Data Model ircuit method Switching frequency [khz] Input current []*1 Inrush current protection P/Pattern Material Single sided Double sided Series/Parallel
DIN Rail Power Supplies
DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
Datasheet of UBS Series Bidirectional Programmable DC Power Source/Load
Datasheet of UBS Series Bidirectional Programmable Power Source/Load Jiangsu United Core Electrical Technology Co.,Ltd Version Information Current Version:V1.0 Notice: Please refer to the datasheet and
Document: PRODSPEC-140 Revision: G DCN No Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger
Document: PRODSPEC-140 Revision: G DCN No. 106512 Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger 1. GENERAL DESCRIPTION 1.1 General Description Fully regulated, constant voltage,
PRODUCT SPECIFICATION File: EA-250U1C-10 Date: May, 25, 2005
SWITCHING POWER SUPPLY Page: 1 of 5 1. SCOPE 2 2. AC INPUT and AC OUTPUT 2 3. DC OUTPUT CURRENT LOAD RANGES 2 3.1 DYNAMIC DC OUTPUT CHARACTERISTICS 2 3.2 DC OUTPUT ON/OFF CONTROL 2 3.3 OUTPUT RIPPLE and
ZWD100PAF Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
ZWD225PAF Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
Advanced Battery Charger 0 ~ 15A 0 ~ 25A 0 ~ 35A 0 ~ 50A 0 ~ 80A. 3 - stage charging capability (IUOU) 90 ~ 264VAC (refer to de-rating curve)
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.