1166 Oak Street Red Wing, Minnesota Fax

Transcription

1 1166 Oak Street Red Wing, Minnesota Fax LED LIGHTING UPGRADE PHASE 2 PROJECT BID INSTRUCTIONS AND SPECIFICATIONS Background The Goodhue County Historical Society, which operates the Goodhue County History Center, is soliciting bids to complete Phase 2 of a LED lighting upgrade project. This phase will focus on the exhibit and collection areas. Rummel Design completed design work for this project in April Project Scope For this project, a list of product specifications is included along with cut sheets. Vendors are to include the cost of fixtures and lamps for each item. Vendors may provide a comparable fixture or lamp from another manufacturer as long as cut sheets for the comparable item are included in the bid package. All installation work will be completed by the City of Red Wing Public Works Department. Project Timeline Bid Letting January 17 to February 9, 2018 Bid Review February 12 to February 23, 2018 Bid Award February 26, 2018 Bid Submission All bid packages are due to the Project Contact by 4 p.m. on Friday, February 9, Packages should be sent by postal mail or as a PDF to the Project Contact. Vendors will get an confirmation that the package was received. Project Contact Dustin Heckman, Executive Director Goodhue County Historical Society 1166 Oak Street Red Wing, MN (651) director@goodhistory.org

2 Fixture Schedule Goodhue County History Center LED Lighting Upgrades Phase 2 Fixtures Fixture # Cut Sheet Page # Quantity B C C T Head Halo L1378MB T Head Halo L1378P U Head Halo L806SMNF8030MB U Head Halo L806SMNF8030P Track & Track Accessories Fixture # Cut Sheet Page # Quantity Line Volt Motion Sensor Ceiling n/a 19 T/U Halo L653MB 12 9 T/U Halo L653P T/U Halo L652MB 12 8 T/U Halo L652P T/U - Halo L900MB 13 2 T/U - Halo L900P T/U - Halo L901MB 13 6 T/U - Halo L901P T/U - Halo L904MB 14 6 T/U - Halo L904P T/U - Halo L905MB 14 1 T/U - Halo L905P 14 4 T/U - Halo L908MB 14 5 T/U - Halo L908P T/U - Halo L909P 15 9 Lamps Lamp # Bulb Type Quantity G A19 LED 2700K 1000L 80CRI 25 T LED17PAR38/PRO/930/FL40/P3 (Cut Sheet Page 18-20) 310

3 Catalog Number 2BZL2 34L EZB LP830 FEATURES & SPECIFICATIONS INTENDED USE The BZL recessed troffer provides fresh architectural aesthetics in a recessed LED lighting fixture. The soft indirect lighting is ideal for retail, schools, healthcare facilities and commercial office spaces. The high efficacy LED system provides long life and excellent color to deliver superior quality indirect lighting. CONSTRUCTION Enclosure constructed from powder coated cold rolled steel with tabbed and screwed on end plates. Fixture sides contain rolled and completely hemmed edges to promote easy handling. End plate edges formed inward to provide smooth edges. Large, easy to position T-bar clips conveniently located and integral to the end plates. Reflector system constructed from a combination of cold roll steel ends, end trim, reflector and aluminum extrusion side flanges. Components are securely screwed together to maintain the integrity and relationship of the optical components. Parts are painted after fabrication for durability and consistency in appearance. OPTICS Reflector system features highly reflective optical composite coating and unique shape that delivers efficient and balanced lighting into the space. LED lamp assemblies captured in aluminum extrusions to maintain the integrity and consistency of the optical system performance. Secondary reflectors redirect light to enhance system performance. ELECTRICAL Long-life LEDs coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000). eldoled driver options deliver choice of dimming range, and choices for control, while assuring flickerfree, low current inrush, 89% efficiency and low EMI. nlight intergrated controls make each luminaire addressable - allowing it to digitally communicate with other nlight enabled controls such as dimmers, switches, occupancy sensors and photocontrols. Simply connect all the nlight enabled control devices and the BZL luminaires using standard CAT-5 cabling. Unique plug-and-play convenience as devices and luminaires automatically discover each other and self-commission. Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing the energy waste created by the traditional practice of over-lighting. Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance. Driver disconnect provided where required to comply with US and Canadian codes. INSTALLATION Easily installs in most standard T-bar systems. Drywall grid adapters available for dry wall ceilings. Suitable for damp location. LISTINGS CSA Certified to meet US and Canadian standards. IC rated. Patents pending. DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. Notes Type Goodhue County Lighting Renovation B INDUSTRY RECOGNITION/AWARDS BREEZ Series Recessed Indirect LED WARRANTY 5-year limited warranty. Complete warranty terms located at Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice. 2BZL 2' x 2' LED Patent No.: US D677,820 S ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 2BZL2 30L EZ1 LP835 2BZL2 34L EZB LP830 Series Lumens 2 Voltage Driver Color temperature Controls 6 Options 2BZL2 BZL LED 1 24L 2400 lumens (blank) MVOLT EZ1 eldoled LP CRI, 3000 K 5 (blank) No controls JP32 Palletized job 30L 3000 lumens ( V) dims to 1% LP CRI, 3500 K pack, qty. 32 N80 nlight with 80% lumen (0-10 volt 34L 3400 lumens dimming) LP CRI, 4000 K management EL14L 1400 lumen battery pack N80EMG nlight with 80% lumen EZB eldoled dims management. For use with to black generator supply EM power (0-10 volt dimming) N100 nlight without lumen management EDB eldoled DALI 3 N100EMG nlight without lumen EXB eldoled management. For use with DMX/RDM 3,4 generator supply EM power SLD Step-level dimming 3 LED Performance Data Lumen Package Color Temp (K) Lumens Watts LPW L L L Accessories: Order as separate catalog number. DGA22 Drywall ceiling adaptor, unit installation Actual wattage may differ by +/- 5% when operating between V +/- 10% Notes 1 Air function not available. 2 Approximate lumen output. 3 Not available with N80,N80EMG,N100 or N100EMG. 4 EXB option not available for 24L and 30L. 5 Consult factory for lead time. 6 nio access limitations. 2BZL-2X2

4 2BZL2 Architectural Recessed LED Lighting 2'x2' PHOTOMETRICS 2BZL2 24L EZ1 LP835, 2397 delivered lumens, test no. LTL 24736, tested in accordance to IESNA LM BZL2 30L EZ1 LP835, 3098 delivered lumens, test no. LTL 24736P3, tested in accordance to IESNA LM BZL2 34L LP835 EZ1, 3672 delivered lumens, test no. LTL25223P, tested in accordance to IESNA LM CP Summary CP Summary CP Summary Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10% RCR Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10% RCR Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10% RCR Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zonal Lumen Summary Zone Lumens % Lamp % Fixture BZL-2X2 LED: One Lithonia Way, Conyers, GA Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/28/15

5 2BZL2 Architectural Recessed LED Lighting 2'x2' nlight Control Accessories: Order as separate catalog number. Visit for complete listing of nlight controls. WallPod stations Model number Occupancy sensors Model number On/Off npodm [color] Small motion 360, ceiling (PIR / dual tech) ncm 9 / ncm PDT 9 On/Off & Raise/Lower npodm DX [color] Large motion 360, ceiling (PIR / dual tech) ncm 10 / ncm PDT 10 Graphic Touchscreen npod GFX Wall switch with raise/lower nwsxpdtlvdx Photocell controls Model number Cat-5 cable bundles (plenum rated) Model number On/Off & Dimming ncm ADCX 10', 15 pieces per bundle CAT5 10FT 30', 15 pieces per bundle CAT5 30FT Constant Lumen Management Enabled by the embedded nlight control, the BZL LED actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred to as lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting. Without Lumen Management Energy is wasted and light level is inconsistent. With Lumen Management Energy is saved and light level remains consistent. 100% 33W 100% 33W POWER INPUT Saved Energy LIGHT OUTPUT LIGHT OUTPUT POWER INPUT LIGHT OUTPUT POWER INPUT POWER INPUT Wasted Energy 80% 26W THOUSAND OPERATING HOURS LIGHT OUTPUT 80% 26W THOUSAND OPERATING HOURS Mounting Data Dimensions All dimensions are inches (centimeters) unless otherwise specified. Specifications Length: 24 (61.0) Width: 23-13/16 (60.5) Depth: 3-5/8 (9.2) Weight: 18lbs 3-5/8 (9.2) 23-13/16 (60.5) 2BZL-2X2 LED: One Lithonia Way, Conyers, GA Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/28/15

6 Catalog Number L LM MDD MVOLT 30K 90CRI WH FEATURES & SPECIFICATIONS INTENDED USE Sharing many popular Z Series elements, this solid-state strip offers long maintenance-free life, several color temperatures, lumen outputs and lengths. Ideal for new construction and retrofit applications in T5 and T8 lengths. Ideal for uplight and downlight in commercial, retail, manufacturing, warehouse, cove and display applications. CONSTRUCTION Compact-design channel and cover are formed from code-gauge, cold-rolled steel. Improved easy "snap 'n' lock" end plates allow for quick attachment. Finish: Paint options include high-gloss, baked white enamel (WH), galvanized (GALV), matte black (MB) and smoke gray (SKGY). Five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance. OPTICS Replaceable medium diffuse lens (up to 10%) offer ingress protection from debris. ELECTRICAL Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring cool-running operation. Internal pluggable wiring harness prevents wiring errors. Electronic LED driver is rated for 75 input watts maximum (see Operational Data on page two for actual wattage consumption), multi-volt input and 0-10V dimming standard. This fixture is designed to withstand a maximum line surge of 1.5kV at 0.75kA combination wave for indoor locations, for applications requiring higher level of protection additional surge protection must be provided. LEDs provide 83 CRI at 3000 K, 3500 K,4000 K or 5000 K. Lumen output ranges from 2100 to 6000 lumens. Beam angle is 110 FWHM (full width at half maximum). Lumen output up to 1,300 lumens per foot. In 86 F (30 C) ambient environments, L70 is predicted to be 100,000+ hours, L85 at 44,000 hours. Luminaire should be installed in applications where ambient temperatures do not exceed 86 F (30 C). Ambient temperatures that exceed 86 F (30 C) will result in reduced life and will void warranty. INSTALLATION Tool-less channel cover for easy installation. Fixture may be surface, pendant or stem mounted. Three-point aligner locks in place for easy continuous row mounting. LISTINGS UL Listed. CSA certified to US and Canadian safety standards. For use in damp locations between -4 F (-20 C) and 86 F (30 C). WARRANTY 5-year limited warranty. Complete warranty terms located at Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Notes Type Goodhue County Lighting Renovation C1 Lensed LED Striplight 24" and 48" Lengths ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: L LM MDD MVOLT 40K 80CRI WH 48" 5000LM MDD MVOLT 30K 90CRI WH Series Length Nominal lumens 1 Diffuser Voltage Lensed LED striplight L24 24" L46 46" L48 48" 2000LM 2000LM 3000LM 5000LM 2,000 lumens 2,000 lumens 3,000 lumens 5,000 lumens MDD ZSD Medium diffuse Zebra striped lens Color temperature MVOLT V 40K 4000 K HVOLT V 2 30K 3000 K 35K 3500 K 50K 5000 K Color rendering index Options Paint finish 80CRI 90CRI 80 CRI 90 CRI PLR Plug-in wiring 3 PLR1LVG Plug-in wiring low voltage 4 BSL722 Emergency battery pack 5,6 WH GALV MB SKGY White Galvanized Matte black Smoke gray Notes Accessories: Order as separate catalog number. ZACVH Aircraft cable with hook HC36 Hanger chain, 36" ZSPRG For 15/16" T-grid only LSXR Sensor Switch LSXR occupancy sensor 3 LZL2 XX MDIF Replacement Lens Medium-diffuse lens. Specify length 24 or 48 (example: LZL2 24 MDIF) 7 1 See Operational Data on page 2 for actual lumens. 2 Not available with L24, 24" fixture. 3 See ordering information on page 3. 4 Use ZSPRG for surface mounting when order this option. 5 Specify voltage, 120 or Output is 1400 lumens. 7 XX denotes length. INDUSTRIAL Page 1 of 4

7 LED Striplight OPERATIONAL DATA Nominal lumen package Length (inches) Delivered lumens 3000 K 77 F (25 C) ambient temperature Delivered lumens 3500 K 77 F (25 C ) ambient temperature Delivered lumens 4000 K 77 F (25 C) ambient temperature Delivered lumens 5000 K 77 F (25 C) ambient temperature 120V/277V Comparable light source 2,000LM 24 2, 009 2,092 2,249 2,457 34W/32W 1-lamp 32W T8, 1-lamp 54W T5HO, 50W HID 2,000LM 46 or 48 1,830 1,905 2,048 2,237 32W/31W 1-lamp 32W T8, 1-lamp 54W T5HO, 50W HID 3,000LM 46 or 48 2,835 2,952 3,173 3,467 42W/41W 2-lamp 32W T8, 1-lamp 54W T5HO, 70W HID 5,000LM 46 or 48 4,274 4,450 4,784 5,226 72W/70W 2-lamp 32W T8, 1-lamp 54W T5HO, 70W HID PROJECTED LUMEN MAINTENANCE Operating hours 0 10,000 20,000 30,000 40,000 50,000 60, ,000 Lumen maintenance factor Based on incomplete LM-80 data. Update expected Q DIMENSIONS All dimensions are shown in inches (centimeters) unless otherwise noted. Specifications subject to change without notice. PALLET DIMENSIONS Length Approximate weight Fixtures per pallet Approximate pallet dimensions (L x W x H) L24 6 lbs " x 46" x 32-11/18" L46 8 lbs " x 46" x 31-1/3" L48 8 lbs " x 46" x 31-1/3" L92 16 lbs /2" x 46" x 31-1/16" L96 16 lbs /2" x 46" x 31-1/16" 1-3/8 (3.6) 48-1/8 (122.2) 1-3/8 (3.6) 2-1/2 (6.3) 21-5/8 (54.9) 21-5/8 (54.9) 2-1/2 (6.3) 1-3/8 (3.6) 24-1/8 (61.3) 1-3/8 (3.6) 1-1/4 (3.0) 3-1/4 (8.3) 2-1/2 (6.3) 9-5/8 (24.4) 9-5/8 (24.4) 2-1/2 (6.3) KO SIZE = 7/8 (22) Dia SLOT SIZE = 1/2 (12.7) X 1/8 (4.0) 3-3/8 (8.6) PHOTOMETRICS Please see INDUSTRIAL Page 2 of 4

8 LED Striplight PRODUCT INFORMATION Advanced plug-in system with three-circuit capability. Available on industrial and strip products and a variety of architectural products mounted in continuous rows. 1, 2, 3 and 4-lamp fixtures. PLR22 (2-circuit) and PLR33 (3-circuit) crossover harness switches hot circuit serving next fixture in row. Reduces fixture types on job for alternating circuit applications (see example below.) Easy one-step installation, saves up to 35% on labor costs. Expanded switching flexibility helps save energy. Rows can be 50% longer with two-circuit systems. Polarized, lock-together nylon connectors prevent miswiring in the field. #12 THHN conductor, rated 600V, 90 C. White neutral wire included. Grounding accomplished by fixture in-row connectors. CSA certified systems available with up to 2 circuits. G ground required. Note: Specifications subject to change without notice. Wiring PLR Advanced 3-Circuit Plug-In ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Series Number of hot wires Branch circuits Dimming Ground PLR PLR22 PLR33 (blank) Not required for 22 or 33 1 Black 2 Black and red 3 Black, red and blue Circuits to which ballast is connected (blank) Not required for 22 or 33 A Black wire B C Red wire Blue wire LV Low-voltage dimming (blank) No ground in PLR G Ground. Maximum 2 circuits Typical Applications Multiple-circuit and single-circuit for longer continuous rows Multiple-circuit with alternating fixtures on separate circuits, 2-circuit (PLR 22) and 3-circuit (PLR 33) Multiple circuit with night-lights located along row as desired TYPICAL APPLICATIONS PLR 3 C PLR 3 C PLR 3 C PLR 3 C PLR 2 B PLR 2 B PLR 2 B PLR 2 B PLR 1 PLR 1 PLR 1 (All PLR22) Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A (All PLR33) Circuit A Circuit B Circuit C Circuit A Circuit B Circuit C Circuit A Circuit B Circuit C Circuit A Circuit B PLR 3 A PLR 3 A PLR 3 A PLR 3 C PLR 3 B PLR 3 B PLR 3 B PLR 3 C PLR 3 A PLR 3 A PLR 3 A PRODUCT INFORMATION A standard occupancy time delay is also present to ensure lights turn off (once minimum on timer has also elapsed) if no occupancy is detected. This timer is factory set at 10 minutes to promote energy savings, but is adjustable between 30 seconds and 30 minutes. These adjustments may be done through the unit s push-button. FEATURES Four interchangeable lenses - high mount 360, low mount 360, high mount aisleway, and small motion 360. Integrated mounting bracket drops lens down 3" from chase nipple - no bracket accessory required. 100% digital PIR detection - provides excellent RF immunity Note: Specifications subject to change without notice. Passive Infrared Indoor Occupancy Sensor LSXR Single Relay ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: LSXR 10 ADC HVOLT 30M LSXR Series Lens option Dimming/photocell LSXR Passive Infrared Indoor (blank) No lens 610 High and low mount 360 (blank) None Occupancy Sensor 6 High mount, High mount 360 and aisleway HL High/low occupancy operation 10 Low mount, 360 3PK High and low mount 360 and aisleway P Switching photocell (on/off) 50 High mount aisleway 4PK All lenses ADC Dimming and switching photocell 9 Small motion, 360 ANL Dimming and switching photocell with high/low occupancy operation MVOLT Voltage Max dim level Min dim level Lead length Temp humidity Default time delay (blank) HVOLT VAC (MVOLT) VAC (blank) 9H 8H 7H For additional information see 10 VDC 9 VDC 8 VDC 7 VDC (blank) 1V 2V 3V 4V 5V 6V Minimum dimming level of ballast 1 VDC 2 VDC 3 VDC 4 VDC 5 VDC 6 VDC (blank) 14" 42L 42" (blank) LT None Low temperature (blank) 5M 15M 20M 30M 10 minutes (with minimum 15 minutes on time) 5 minutes (LED only) 15 minutes 20 minutes 30 minutes INDUSTRIAL Page 3 of 4

9 LED Striplight OPTIONS AND ACCESSORIES The Z Series fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories. HANGER CHAIN 36" chain with Y hanger. Order as: HC36 Z SPRING HANGER Snap n lock design requires no fasteners and can be used on T-grid ceiling or universal mounting systems. Order as: ZSPRG ZACVH HANGER 10' Aircraft cable with Y hanger. Order as: ZACVH INDUSTRIAL: One Lithonia Way, Conyers, GA Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/04/15 Page 4 of 4

10 FEATURES & SPECIFICATIONS INTENDED USE Sharing many popular Z Series elements, this solid-state strip offers long maintenance-free life, several color temperatures, lumen outputs and lengths. Ideal for new construction and retrofit applications in T5 and T8 lengths. Ideal for uplight and downlight in commercial, retail, manufacturing, warehouse, cove and display applications. CONSTRUCTION Compact-design channel and cover are formed from code-gauge, cold-rolled steel. Improved easy "snap 'n' lock" end plates allow for quick attachment. Finish: Paint options include high-gloss, baked white enamel (WH), galvanized (GALV), matte black (MB) and smoke gray (SKGY). Five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance. OPTICS Replaceable medium diffuse lens (up to 10%) offer ingress protection from debris. ELECTRICAL Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring cool-running operation. Internal pluggable wiring harness prevents wiring errors. Electronic LED driver is rated for 75 input watts maximum (see Operational Data on page two for actual wattage consumption), multi-volt input and 0-10V dimming standard. This fixture is designed to withstand a maximum line surge of 1.5kV at 0.75kA combination wave for indoor locations, for applications requiring higher level of protection additional surge protection must be provided. LEDs provide 83 CRI at 3000 K, 3500 K,4000 K or 5000 K. Lumen output ranges from 2100 to 6000 lumens. Beam angle is 110 FWHM (full width at half maximum). Lumen output up to 1,300 lumens per foot. In 86 F (30 C) ambient environments, L70 is predicted to be 100,000+ hours, L85 at 44,000 hours. Luminaire should be installed in applications where ambient temperatures do not exceed 86 F (30 C). Ambient temperatures that exceed 86 F (30 C) will result in reduced life and will void warranty. INSTALLATION Tool-less channel cover for easy installation. Fixture may be surface, pendant or stem mounted. Three-point aligner locks in place for easy continuous row mounting. LISTINGS UL Listed. CSA certified to US and Canadian safety standards. For use in damp locations between -4 F (-20 C) and 86 F (30 C). WARRANTY 5-year limited warranty. Complete warranty terms located at Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. Catalog Number Notes Type L LM MDD MVOLT 30K 90CRI WH w/lsxr 4PK P Goodhue County Lighting Renovation C2 Lensed LED Striplight 24" and 48" Lengths ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: L LM MDD MVOLT 40K 80CRI WH 48" 5000LM MDD MVOLT 30K 90CRI WH Series Length Nominal lumens 1 Diffuser Voltage Lensed LED striplight L24 24" L46 46" L48 48" 2000LM 2000LM 3000LM 5000LM 2,000 lumens 2,000 lumens 3,000 lumens 5,000 lumens MDD ZSD Medium diffuse Zebra striped lens Color temperature MVOLT V 40K 4000 K HVOLT V 2 30K 3000 K 35K 3500 K 50K 5000 K Color rendering index Options Paint finish 80CRI 90CRI 80 CRI 90 CRI PLR Plug-in wiring 3 PLR1LVG Plug-in wiring low voltage 4 BSL722 Emergency battery pack 5,6 WH GALV MB SKGY White Galvanized Matte black Smoke gray LSXR Accessories: Order as separate catalog number. ZACVH Aircraft cable with hook HC36 Hanger chain, 36" ZSPRG For 15/16" T-grid only LSXR Sensor Switch LSXR occupancy sensor 3 LZL2 XX MDIF Replacement Lens Medium-diffuse lens. Specify length 24 or 48 (example: LZL2 24 MDIF) 7 Notes 1 See Operational Data on page 2 for actual lumens. 2 Not available with L24, 24" fixture. 3 See ordering information on page 3. 4 Use ZSPRG for surface mounting when order this option. 5 Specify voltage, 120 or Output is 1400 lumens. 7 XX denotes length. INDUSTRIAL Page 1 of 4

11 LED Striplight OPERATIONAL DATA Nominal lumen package Length (inches) Delivered lumens 3000 K 77 F (25 C) ambient temperature Delivered lumens 3500 K 77 F (25 C ) ambient temperature Delivered lumens 4000 K 77 F (25 C) ambient temperature Delivered lumens 5000 K 77 F (25 C) ambient temperature 120V/277V Comparable light source 2,000LM 24 2, 009 2,092 2,249 2,457 34W/32W 1-lamp 32W T8, 1-lamp 54W T5HO, 50W HID 2,000LM 46 or 48 1,830 1,905 2,048 2,237 32W/31W 1-lamp 32W T8, 1-lamp 54W T5HO, 50W HID 3,000LM 46 or 48 2,835 2,952 3,173 3,467 42W/41W 2-lamp 32W T8, 1-lamp 54W T5HO, 70W HID 5,000LM 46 or 48 4,274 4,450 4,784 5,226 72W/70W 2-lamp 32W T8, 1-lamp 54W T5HO, 70W HID PROJECTED LUMEN MAINTENANCE Operating hours 0 10,000 20,000 30,000 40,000 50,000 60, ,000 Lumen maintenance factor Based on incomplete LM-80 data. Update expected Q DIMENSIONS All dimensions are shown in inches (centimeters) unless otherwise noted. Specifications subject to change without notice. PALLET DIMENSIONS Length Approximate weight Fixtures per pallet Approximate pallet dimensions (L x W x H) L24 6 lbs " x 46" x 32-11/18" L46 8 lbs " x 46" x 31-1/3" L48 8 lbs " x 46" x 31-1/3" L92 16 lbs /2" x 46" x 31-1/16" L96 16 lbs /2" x 46" x 31-1/16" 1-3/8 (3.6) 48-1/8 (122.2) 1-3/8 (3.6) 2-1/2 (6.3) 21-5/8 (54.9) 21-5/8 (54.9) 2-1/2 (6.3) 1-3/8 (3.6) 24-1/8 (61.3) 1-3/8 (3.6) 1-1/4 (3.0) 3-1/4 (8.3) 2-1/2 (6.3) 9-5/8 (24.4) 9-5/8 (24.4) 2-1/2 (6.3) KO SIZE = 7/8 (22) Dia SLOT SIZE = 1/2 (12.7) X 1/8 (4.0) 3-3/8 (8.6) PHOTOMETRICS Please see INDUSTRIAL Page 2 of 4

12 LED Striplight PRODUCT INFORMATION Advanced plug-in system with three-circuit capability. Available on industrial and strip products and a variety of architectural products mounted in continuous rows. 1, 2, 3 and 4-lamp fixtures. PLR22 (2-circuit) and PLR33 (3-circuit) crossover harness switches hot circuit serving next fixture in row. Reduces fixture types on job for alternating circuit applications (see example below.) Easy one-step installation, saves up to 35% on labor costs. Expanded switching flexibility helps save energy. Rows can be 50% longer with two-circuit systems. Polarized, lock-together nylon connectors prevent miswiring in the field. #12 THHN conductor, rated 600V, 90 C. White neutral wire included. Grounding accomplished by fixture in-row connectors. CSA certified systems available with up to 2 circuits. G ground required. Note: Specifications subject to change without notice. Wiring PLR Advanced 3-Circuit Plug-In ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Series Number of hot wires Branch circuits Dimming Ground PLR PLR22 PLR33 (blank) Not required for 22 or 33 1 Black 2 Black and red 3 Black, red and blue Circuits to which ballast is connected (blank) Not required for 22 or 33 A Black wire B C Red wire Blue wire LV Low-voltage dimming (blank) No ground in PLR G Ground. Maximum 2 circuits Typical Applications Multiple-circuit and single-circuit for longer continuous rows Multiple-circuit with alternating fixtures on separate circuits, 2-circuit (PLR 22) and 3-circuit (PLR 33) Multiple circuit with night-lights located along row as desired TYPICAL APPLICATIONS PLR 3 C PLR 3 C PLR 3 C PLR 3 C PLR 2 B PLR 2 B PLR 2 B PLR 2 B PLR 1 PLR 1 PLR 1 (All PLR22) Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A (All PLR33) Circuit A Circuit B Circuit C Circuit A Circuit B Circuit C Circuit A Circuit B Circuit C Circuit A Circuit B PLR 3 A PLR 3 A PLR 3 A PLR 3 C PLR 3 B PLR 3 B PLR 3 B PLR 3 C PLR 3 A PLR 3 A PLR 3 A PRODUCT INFORMATION A standard occupancy time delay is also present to ensure lights turn off (once minimum on timer has also elapsed) if no occupancy is detected. This timer is factory set at 10 minutes to promote energy savings, but is adjustable between 30 seconds and 30 minutes. These adjustments may be done through the unit s push-button. FEATURES Four interchangeable lenses - high mount 360, low mount 360, high mount aisleway, and small motion 360. Integrated mounting bracket drops lens down 3" from chase nipple - no bracket accessory required. 100% digital PIR detection - provides excellent RF immunity Note: Specifications subject to change without notice. Passive Infrared Indoor Occupancy Sensor LSXR Single Relay ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: LSXR 10 ADC HVOLT 30M LSXR Series 4PK Lens option P Dimming/photocell LSXR Passive Infrared Indoor (blank) No lens 610 High and low mount 360 (blank) None Occupancy Sensor 6 High mount, High mount 360 and aisleway HL High/low occupancy operation 10 Low mount, 360 3PK High and low mount 360 and aisleway P Switching photocell (on/off) 50 High mount aisleway 4PK All lenses ADC Dimming and switching photocell 9 Small motion, 360 ANL Dimming and switching photocell with high/low occupancy operation MVOLT Voltage Max dim level Min dim level Lead length Temp humidity Default time delay (blank) HVOLT VAC (MVOLT) VAC (blank) 9H 8H 7H For additional information see 10 VDC 9 VDC 8 VDC 7 VDC (blank) 1V 2V 3V 4V 5V 6V Minimum dimming level of ballast 1 VDC 2 VDC 3 VDC 4 VDC 5 VDC 6 VDC (blank) 14" 42L 42" (blank) LT None Low temperature (blank) 5M 15M 20M 30M 10 minutes (with minimum 15 minutes on time) 5 minutes (LED only) 15 minutes 20 minutes 30 minutes INDUSTRIAL Page 3 of 4

13 LED Striplight OPTIONS AND ACCESSORIES The Z Series fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories. HANGER CHAIN 36" chain with Y hanger. Order as: HC36 Z SPRING HANGER Snap n lock design requires no fasteners and can be used on T-grid ceiling or universal mounting systems. Order as: ZSPRG ZACVH HANGER 10' Aircraft cable with Y hanger. Order as: ZACVH INDUSTRIAL: One Lithonia Way, Conyers, GA Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/04/15 Page 4 of 4

14 D E S C R I P T I O N Miniature size, decorator finishes, push-in connectors, economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. Polarized connectors and end caps are molded polycarbonate. Halo Miniature Track accepts both Halo and Lazer-by- Halo lampholders. Catalog # Project Comments HALO Type Date Prepared by S P E C I F I C A T I O N F E A T U R E S A. Structural Extruded aluminum.060" [1.5mm] nominal wall thickness B. Line Conductor: Solid copper bus bars [cross section equivalent to # 12 AWG wire]. C. Insulating Liner Extruded polyvinyl insulator. D. Ground Conductor Exclusive independent grounding bus conductor. Maintains an independent positive ground #12 AWG path between lampholder, Trac channel and building s ground system. E. Neutral Conductor Cross section equivalent of #12 AWG wire. F. Polarity Indicator (Neutral) Visual polarity groove indicates proper electrical installation of lampholder adapter. Listings culus listed for use with Halo and Lazer-by-Halo lampholders. A B C D E H L650, L651 L652, L653 W Y F M I N I A T U R E S I N G L E C I R C U I T T R A C S Y S T E M S A M P L E N U M B E R : L M B T r a c F i n i s h e s L650=2' L651=4' L652=8' L653=12' L650 L =2' Nominal Actual length: 20-1/8" [511mm] W=1 3/8" [35mm] H =11/16" [17.5mm] Finish Codes P = White MB = Black B = Polished Brass SL =Silver P=Satin White MB=Matte Black BZ=Bronze L651 L =4' Nominal Actual length: 44-1/8" [1121mm] W=1 3/8" [35mm] H =11/16" [17.5mm] Finish Codes P = White MB = Black BZ = Bronze AB = Antique Brass B = Polished Brass SL =Silver AB=Antique Brass PB=Polished Brass SL =Silver L652 L =8' Nominal Actual length: 98-1/8" [2492mm] W=1 3/8" [35mm] H =11/16" [17.5mm] Finish Codes P = White MB = Black BZ = Bronze AB = Antique Brass B = Polished Brass SL =Silver A c c e s s o r i e s (See Below) L653 L =12'Nominal Actual length: 140-1/8" [3559mm] W=1 3/8" [3559mm] H =11/16" [17.5mm] Finish Codes P = White MB = Black SL =Silver Connectors L900 Outlet Box Cover L901 Live End connector L902 Flexible Connector L903 Straight Connector L904 L Connector L905 T Connector L906 X Connector L907 Outlet Box for use with T-Bar ceiling L908 Mini Joiner L909 Floating Canopy and Connector L950 Cord and Plug Connector L979 Conduit Continuation Kit L980 Live End Conduit Adapter DE600 Dead End Accessories L951 Wire Way Cover for Pendant Assembly Kit L983 T-Bar Attachment Clip L992 Pendant Kit assembly L48 48 Steel Stem L994 Pendant Adapter Current Limiter - End Feed LC901CB120=120W LC901CB300=300W LC901CB600=600W LC901CB960=960W LC901CB1200=1200W Current Limiter - Center Feed LC903CB120=120W LC903CB300=300W LC903CB600=600W LC903CB960=960W LC903CB1200=1200W P o w e r - T r a c Finish Codes P = White MB = Black ADV Supersedes ADV042177, ADV & ADV /08

15 D E S C R I P T I O N LC901, LC903 Current Limiter - End and Center Feeds End-feed and Center-feed capable: Five breaker sizes are available. Consult factory if other sizes are required. Can be utilized on hard or grid ceilings. Can be used with pendant suspended track. Breaker can be used as an on-off switch. Breaker features a tripped condition indicator. Approved by the California Energy Commission meets Title 24 requirements. culus Listed 1.02" [26mm] 5.54" [140mm] Feed Type Circuit 1 Breaker Finish 5.30" [160mm] LC901 LC903 LC901 = Halo Power-Trac 1-Circuit End Feed LC903 = Halo Power-Trac 1-Circuit Center Feed CB120 = 120W 120V) CB300 = 300W 120V) CB600 = 600W 120V) CB960 = 960W 120V) CB1200 = 1200W 120V) P = White MB = Black 6.33" [160mm] 7" [179mm] Sample catalog number: LC901CB120P (Field assembly of feed and circuit breaker required) Consult factory for Single Circuit Center-feed requiring two circuit breakers L900 Outlet Box Cover Can be used at any electrical feed connection point (Live, Straight, L, T or X). Drill guides on back for virtually all standard outlet boxes. Size: 5 sq. Screws included. Color codes: P (White), MB (Black) 5" (127mm) 1 1/4" (32mm) 1 1/4" (32mm) C o n n e c t o r L900 F i n i s h 5" (127mm) 3/32" (2.4mm) L900 L901 Live End Connector To start a run. Color codes: P (White), MB (Black) 4 1/4" (108mm) 2 3/4" (70mm) 1 3/8" (35mm) C o n n e c t o r F i n i s h L901 L902 Flexible Connector To connect two track sections at any angle up to 90 in either plane or wall to ceiling or pitched ceiling applications. Color codes: P (White), MB (Black) C o n n e c t o r F i n i s h L902 11/16" (17mm) 5 3/4" (146mm) 4 3/16" (107mm) L901 L902 ADV Supersedes ADV042177, ADV & ADV /08

16 D E S C R I P T I O N L903 Straight Connector To connect two track sections end-to-end. L903 differs from mini connector L908 in that it provides a center feed option and is longer. May be used as feed point. Color codes: P (White), MB (Black) C o n n e c t o r F i n i s h L903 4" (102mm) 7" (178mm) L903 L904 L Connector To connect two track sections at a right angle. Field adjustable for either right hand or left hand application. May be used as feed point. Color codes: P (White), MB (Black) 2 3/4" (70mm) 4 1/4" (108mm) C o n n e c t o r L904 F i n i s h 2 3/4" (70mm) 4 1/4" (108mm) L904 L905 T Connector To connect three track sections into a T configuration. Field adjustable for either right hand or left hand application. May be used as feed point. Color codes: P (White), MB (Black) C o n n e c t o r F i n i s h L905 5" (127mm) 8" (204mm) L905 L906 X Connector To connect four track sections into a cross configuration. May be used as feed point. Color codes: P (White), MB (Black) 7" (176mm) 4" (102mm) C o n n e c t o r L906 F i n i s h L907 Outlet Box for use with T-Bar ceiling L901, L903, L904, L905 or L906 connector also required. 4 x 4 x 1 1/8. Color codes: P (White), MB (Black) 1 1/4" (32mm) 4" (102mm) 4" L906 C o n n e c t o r L907 F i n i s h 1/2" (13mm) L907 L908 Mini Joiner A low profile connector to cleanly and crisply join two straight track sections end-to-end. (Note: The L908 is not a feed point). Color codes: P (White), MB (Black) C o n n e c t o r F i n i s h L /8" (86mm) L908 ADV Supersedes ADV042177, ADV & ADV /08

17 D E S C R I P T I O N L909 Floating Canopy and Connector Track can be connected to existing outlet box located anywhere along the track. Comes with canopy cover, connector, dead-end and mounting hardware. 4 1/8 x 4 1/4 x 1 3/8. Color codes: P (White), MB (Black) 1/4" (6.4mm) 4 1/4" (108mm) 3 1/4" (83mm) C o n n e c t o r L909 F i n i s h 1 3/8" (35mm) 4 1/4" (108mm) L909 L950 Cord and Plug Connector 12 three-wire cord with grounded plug. Maximum capacity 10 AMP Color Codes: P (White), MB (Black) C o n n e c t o r L950 F i n i s h L950 L951 Wire Way Cover for Pendant Assembly Kit For track to be wired through stem (order one for each feed point used). For use with line connectors (L901, L902, L903, L904, L905 or L906) and pendant stem kit (L992) order separately Color Codes: P (White), MB (Black) C o n n e c t o r F i n i s h L951 13/16" (21mm) 3/16" (2.8mm) 15/16" (24mm) L901, L902, L903, L904, L905 or L /8" (207mm) Stem L951 Cover Track L951 L979 Conduit Continuation Kit Consisting of one left feed and one right feed. To continue a run around obstructions. Designed to accept 1/2 trade size conduit fitting (not included). 1 3/8" Color Codes: P (White), MB (Black) (35mm) C o n n e c t o r F i n i s h L /8" (35mm) 1 3/4" (45mm) 5 3/4" L979 L980 Live End Conduit Adapter Designed to accept standard 1/2 trade size conduit fitting (not supplied). Use when feeding to track through surface conduit system. Color Codes: P (White), MB (Black) C o n n e c t o r F i n i s h L /8" (35mm) 1-3/8" (35mm) 1-3/4" (45mm) 5-3/4" (146mm) L980 ADV Supersedes ADV042177, ADV & ADV /08

18 D E S C R I P T I O N L983 T-Bar Attachment Clip Allows track to be attached to inverted tee ceiling. Order as follows: 2 kits for 2 Trac; 2 kits for 4 Trac; 3 kits for 8 Trac and 4 kits for 12 Trac. L986 Mini-T Bar Clip For mounting Trac on suspended ceilings with mini-grid (9/16 wide) system. C o n n e c t o r F i n i s h L98_ 1-1/16" (27mm) 13/16" (21mm) 1-1/2" (38mm) L983 L992 Pendant Kit Assembly Order 2 kits for 2 Trac; 2 kits for 4 Trac; 3 kits for 8 Trac; and 4 kits for 12 Trac. Includes one 18 threaded steel stem, canopy and mounting hardware. L48 48 Steel Stem For additional length with L992. Can be field cut. Color Codes: P (White), MB (Black) C o n n e c t o r F i n i s h L992 5" (127mm) 1" (25mm) 18" (458mm) 13/16" (21mm) 1 5/16" (33mm) 2 5/8" (69mm) L992 L994 Pendant Adapter For installing pendant mounted Power-Trac on sloped ceiling. For use with L992. Color Codes: P (White), MB (Black) C o n n e c t o r L994 F i n i s h 5 7/8" (150mm) 1 7/8" (48mm) L994 Note: Specifications and Dimensions subject to change without notice. Visit our web site at Customer First Center 1121 Highway 74 South Peachtree City, GA FAX Cooper Lighting McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B FAX

19 Goodhue County Lighting Renovation T

20 ULTRA PRO & ULTRA PRO HD LED PAR Lamps Key Features & Benefits Attractive directional light Extensive new portfolio CRI: 80+ and 90+ CCT: 2700K, 3000K, 3500K, 4000K Beam angles: 12, 15, 25, 40 Dimmable down to 5% on select dimmers* Design life: 50,000 hours (L 70)** Damp rated Energy savings up to 86% Longer life than traditional halogen lamps No warm-up time, instant on with full light output and stable color 90+ CRI product offering compliant with "California Quality" specification 5 year warranty * Performance may vary depending on dimmer used in application. Please refer to Dimmer Compatibility List (RETRO-DIM) for a list of compatible dimmers or visit ** Rated life: 25,000 hours (L70) Note: Made-To-Order Products available. Refer to RETRO069R4-MTO for details. ULTRA PRO & ULTRA PRO HD LED PAR lamps offer extreme energy efficiency, high power factor and beam characteristics that closely match halogen PAR lamps featuring a high center beam candlepower and soft edges. This lamp family offers an extensive selection of lamps with four PAR lamp categories, four color temperatures and four beam angles. For those color critical applications, this offering provides a 90+, as well as an 80+ color rendering index. The high R9 (R9 up to 85) feature enhances warm color palettes and makes whites more crisp, making them ideal for hospitality, healthcare and retail applications. With efficiencies up to 90 lumens per watt, ULTRA PRO and ULTRA HD PRO LED lamps are an ideal part of any energy conservation strategy. Application Information Product Offering Ordering Beam Color Abbreviation Wattage Angle Temperature CRI PAR20 LED 7, 8 15, 25, K, 3000K, 3500K 80+, 90+ PAR30 LED 10, 11 15, 25, K, 3000K, 3500K, 4000K 80+, 90+ PAR30LN LED 13 12, 15, 25, K, 3000K, 3500K, 4000K 80+, 90+ PAR38 LED 17 15, 25, K, 3000K, 3500K, 4000K 80+, 90+ Applications General lighting Recessed downlights Track lighting Wall washer Market Segments Art galleries Hospitality Museums Offices Residential Restaurants Retail Application Notes 1. Operating Temperature: -4 F to 104 F (-20 C to +40 C) 2. Not for use with emergency light fixtures or exit lights 3. Can be used in enclosed fixtures 4. Suitable for use in UL rated fixture where protected from the weather 5. Consult sales representative for alternative heat sink color 6. For lamp warranty information please visit: 7. All PAR lamps from OSRAM SYLVANIA use polymethyl methacrylate (PHMA) for their lenses. It is a transparent thermoplastic often used as a lightweight, shatter-resistant alternative to glass. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For FCC Part 15 user information, please see RETRO069R5 1-15

21 Catalog # LED17PAR38/PRO/930/FL40/P3 Type J, T Project Goodhue County Museum Renovation Comments Prepared by Rummel Design Specification Data Ordering Information Item Ordering Wattage Input Typical Beam Power ENERGY Number Abbreviation (W) Replaces Volts CCT Lumens LPW CBCP CRI Angle R9 Factor STAR PAR20 CRI LED7PAR20/PRO/827/NFL25/P3 7 50W K cd Yes LED7PAR20/PRO/827/FL40/P3 7 50W K cd Yes LED7PAR20/PRO/830/NFL25/P3 7 50W K cd Yes LED7PAR20/PRO/830/FL40/P3 7 50W K cd Yes LED7PAR20/PRO/835/NFL25/P3 7 50W K cd Yes LED7PAR20/PRO/835/FL40/P3 7 50W K cd Yes PAR20 CRI LED7PAR20/PRO/927/FL40/P3 7 50W K cd Yes LED8PAR20/PRO/930/WSP15/P3 8 50W K cd Pending LED7PAR20/PRO/930/NFL25/P3 7 50W K cd Yes LED7PAR20/PRO/930/FL40/P3 7 50W K cd Yes LED8PAR20/PRO/935/WSP15/P3 8 50W K cd Pending LED7PAR20/PRO/935/NFL25/P3 7 50W K cd Yes LED7PAR20/PRO/935/FL40/P3 7 50W K cd Yes LED7PAR20/PRO/940/NFL25/P3 7 50W K cd Yes LED7PAR20/PRO/940/FL40/P3 7 50W K cd Yes PAR30 CRI LED10PAR30/PRO/827/NFL25/P W K cd Yes LED10PAR30/PRO/827/FL40/P W K cd Yes LED10PAR30/PRO/830/NFL25/P W K cd Yes LED10PAR30/PRO/830/FL40/P W K cd Yes LED10PAR30/PRO/835/NFL25/P W K cd Yes LED10PAR30/PRO/835/FL40/P W K cd Yes PAR30 CRI LED11PAR30/PRO/930/WSP15/P W K cd Pending LED10PAR30/PRO/930/NFL25/P W K cd Yes LED10PAR30/PRO/930/FL40/P W K cd Yes LED11PAR30/PRO/935/WSP15/P W K cd Pending LED10PAR30/PRO/935/NFL25/P W K cd Yes LED10PAR30/PRO/935/FL40/P W K cd Yes PAR30LN CRI LED13PAR30LN/PRO/827/NFL25/P W K cd Yes LED13PAR30LN/PRO/827/FL40/P W K cd Yes LED13PAR30LN/PRO/830/NFL25/P W K cd Yes LED13PAR30LN/PRO/830/FL40/P W K cd Yes LED13PAR30LN/PRO/835/SP12/P W K cd Pending LED13PAR30LN/PRO/835/NFL25/P W K cd Yes LED13PAR30LN/PRO/835/FL40/P W K cd Yes PAR30LN CRI LED13PAR30LN/PRO/930/WSP15/P W K cd Yes LED13PAR30LN/PRO/930/NFL25/P W K cd Yes LED13PAR30LN/PRO/930/FL40/P W K cd Yes LED13PAR30LN/PRO/935/NFL25/P W K cd Yes LED13PAR30LN/PRO/935/FL40/P W K cd Yes PAR38 CRI LED17PAR38/PRO/827/NFL25/P W K cd Yes LED17PAR38/PRO/827/FL40/P W K cd Yes LED17PAR38/PRO/830/NFL25/P W K cd Yes LED17PAR38/PRO/830/FL40/P W K cd Yes LED17PAR38/PRO/835/NFL25/P W K cd Yes LED17PAR38/PRO/835/FL40/P W K cd Yes PAR38 CRI LED17PAR38/PRO/930/WSP15/P W K cd Yes LED17PAR38/PRO/930/NFL25/P W K cd Yes LED17PAR38/PRO/930/FL40/P W K cd Yes LED17PAR38/PRO/935/NFL25/P W K cd Yes LED17PAR38/PRO/935/FL40/P W K cd Yes * Additional beam angles and color temperatures available as made-to-order. Ordering Guide LED 17 PAR38 / PRO / 827 / FL 40 / P3 LED Lamps Wattage: Lamp type: Professional CRI=80 Flood Beam PRO 3 7, 8, 10, 11, PAR38, Series Color Temp. Angle 13, 17, 18 PAR30LN, 2700K PAR30, 3000K PAR K 4000K

22 Energy Savings Product LED Similar Halogen Watts Energy Energy Savings LED Life vs. Description Life (hrs.) Halogen Lumens Saved Savings* per Year Incandescent LED7PAR20 50,000 50W PAR $ $ X LED8PAR20 50,000 50W PAR $ $ X LED10PAR30 50,000 50W PAR $ $ X LED11PAR30 50,000 50W PAR $ $ X LED13PAR30LN 50,000 75W PAR30LN $ $ X LED17PAR38 50,000 90W PAR $ $ X LED18PAR38 50,000 90W PAR $ $ X *Energy savings over life of lamp calculated at $0.11/kWh at 50,000 hours Lamp Dimensions (A) MOL inches (mm) (B) Diameter inches (mm) PAR (88) 2.52 (64) PAR (92) 3.78 (96) PAR30LN 4.69 (119) 3.78 (96) PAR (127) 4.80 (122) B B B B A A A A PAR20 PAR30 PAR30LN PAR38 Americas Headquarters OSRAM SYLVANIA Inc. 100 Endicott Street Danvers, MA USA Phone LIGHTBULB ( ) SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc. LED CREATING TOMORROW is a registered trademark of OSRAM GmbH. ENERGY STAR is a registered trademark of the U.S. Government. Specifications subject to change without notice. /sylvania /sylvania 2015 OSRAM SYLVANIA

23 DESCRIPTION High efficacy low profile track fixture ideal for accent and display lighting applications. Featuring die cast construction with a simple low profile design. These lampholders are perfect for those applications where performance is required from a discreet source. Catalog # Project Comments HALO Type Date Prepared by SPECIFICATION FEATURES Quick Lock Adapter Attaches electrically and mechanically anywhere along the track. Includes discrete locking tab that locks the luminaire on the track and allows for easy removal and repositioning. Driver Housing Die-cast and extruded aluminum housing incorporates the lamp control circuit. Heat Sink Aluminum die-cast heat sink provides exceptional thermal management to yield 70% lumen maintenance after 50,000 hours of operation. Luminaire Arm Arm allows the lamp housing tilt to adjust +/- 90 horizontally. This enables the ballast housing to remain static on the track creating a clean look while providing full aiming capabilities. LED Light Engine Equipped with (5) 3-Watt white LEDs. Configurable optic allows for 3 optical distributions and can be changed in the field to adjust to the current lighting need. CRI of 85. Dimming The 806/807SM is dimmable to 15% with electronic low voltage equipment. (ELV dimmers need a neutral connection in the wall box.) See our website for dimmer compatibility guide Compliance UL/cUL listed for use with Halo Power-Trac and Lazer Track. UL/cUL classified for Juno [See Footnote #1 in Ordering Information below], Lightolier [See Footnote #2 below], and Global [See Footnote #3 below] TEK/HTEK Track. L806SM 5.35 [135.8mm] 4.52 [114.9mm] 2.26 [57.4mm] L807SM L806SM L807SM Halo LED Ø 3.54 [90mm] 12W 3000 K CBCP Spot 14 11,119 Wide Spot 19 6,482 Narrow Flood 30 2,639 Flood 40 1, [153.3mm] Lighting Data 3000 K Spot 1.82 [46.2mm] Ø 3.54 [90mm] 2.26 [57.4mm] Lumens: 1073 Lumens per watt: 89 Watts at 120VAC Energy Data: Input Power: 12.06W Power Factor: >.9 Input Current:.149 Amps ORDERING INFORMATION SAMPLE NUMBER: L806SMFL830AH (Halo or Lazer Track connector, Spot Distribution, 3000 K, with Aluminum Haze Finish) Track LED Beam CRI CCT Finish Voltage Accessories (order separately) L= Halo and Lazer Power-Trac LJ=Juno Track 1 LL=Lightolier Track 2 L2G=Global TEK or HTEK 3 806SM=806SM 807SM=807SM SP=Spot 14 WS=Wide Spot 18 NF= Narrow Flood 28 FL=Flood 44 80=80+ 27=2700 K 30=3000 K 40=4000 K AH=Aluminum Haze MB=Black P=White 277=277 VAC (Only with HTEK) [Blank]=120V OPK8067SMSP= Kit, Optics 806SM, 807SM, Spot OPK8067SMWS= Kit, Optics 806SM, 807SM, Wide Spot OPK8067SMNF= Kit, Optics 806SM, 807SM, Narrow Flood OPK8067SMFL= Kit, Optics 806SM, 807SM, Flood NOTES: 1. Juno T single circuit and 2-circuit track contact. Juno is a registered trademark of Juno Lighting. 2. Lightolier Lyfespan 6000 single circuit and 2 circuit track contact. Lightolier is a registered trademark of Philips Lighting. 3. Global is a registered trademark of Nordic Aluminum. ADV December 10, :39 PM