INDEX PRODUCT CONTAINS

Transcription

1 INDEX FOREWORD PRODUCT CONTAINS OPTIONAL ACCESSORIES SPECIFICATION FEATURES WARNING and NOTES ERIES and MAX CHARGE CURRENT SYSTEM SETTING CHARGE/ LIPO ERY CHARGE/ LIFE ERY CHARGE/ LIIO ERY CHARGE/ NIMH ERY CHARGE/ NICD ERY CHARGE/ PB ERY NOTES and REMARK of WORKING STATUS MONITOR ERY IN SERIES/PARALLEL CHARGE WARRANTY LIABILITY EXCLUSION CONFORMITY DECLARATION p2 p2 p3 p3 p p5 p6-7 p8 p9-2 p3-6 p7-20 p2-23 p2-26 p27-29 p30 p3 p32 p33 p33 p3 Thank you for purchasing CASALRC C6G/C6G+/C8G DC balance r/disr. For your convenience and safety, please read this manual carefully before using this product. It s a professional and high efficiency balance r/disr which is especially designed for charging/discharging LiPo, LiFe, LiIo, NiMH, NiCd and PB Charger x DC Input Wire(AWG 50cm) PRODUCT CONTAINS Below items are included in the package, contact your supplier if any item is miss. Multi-Functional Switch *Select: turn left/right *Enter/Set/Stop: press FOREWORD 28x6 Pixel LCD Screen Cooling Fan Balance Port Charge Output Socket DC Input Clip Charge Cable x Balance Socket adapter x Rubber feet xpcs Instruction Manual x Temperature Sensor Port 2

2 OPTIONAL ACCESSORIES FEATURES Parallel Adapter Temperature Sensor(magnet) 2x2S in series Adapter 2x3S in series Adapter High efficiency synchronous DC-DC circuit. Special advanced charging technology ensure a fast and precision charging performance. The CASALRC C6G/C6G+/C8G balance rs series has a integrated cell balancer which can especially used for charging the LiPo, Lilo, LiFe, NiMH, NiCd and Pb batteries. 0 battery profile memories, default memory of latest profile, 9 custom memories can be and load by the user. SPECIFICATION C6G C6G+ C8G Input voltage range: v DC V DC V DC range: A A A Dis current range: A A A Maximum power: 300W 00W 00W Maximum dis power: 20W 20W 20W Current drain for balancing: 00mA 00mA 00mA Balance accuracy: <0mV <0mV <0mV LiPo/LiIo/LiFe battery cell count: -eries -eries -8 series NiCd/NiMH battery cell count: -5 series -5 series -20 series Pb battery cell count: -0 series (2-20V) -0 series (2-20V) -2 series (2-2V) Battery setup memories: Temperature sensor: Yes Yes Yes Weight: 30g 33g 33g Dimension(LxWxD): 5X03X35mm 5X03X35mm 5X03X35mm 28x6 pixel LCD screen shows rich information: input voltage, output voltage, outputl current, capacity (mah), time, temperature, cell voltage, cell voltage difference etc. Various functional settings can meet a wide range of use. Balance, normal, fast, and dis for Lithium batteries. auto-, manual-, and dis for NiCd/NiMH batteries. Charge, and dis for Pb batteries. Various system settings: light, contrast, key sound, safty time, temperature cutoff, capacity cutoff, power limited and input voltage cutoff. Full protection system: protection of reversed polarity (input and output), higher/lower input voltage, power supplymbattery temperature, over /dis and time limited. 3

3 WARNING and NOTES CASALRC C6G/C6G+/C8G is ONLY suitable for reable LiPo, LiFe, LiIo,NiMH and PB batteries. Do not attempt to dry cells. Charge other types of batteries may cause fire or explosion. Never leave the r unattended when it is working. If you leave, disconnect the battery to prevent any unexpected dangerous or damage. The prescript DC input voltage range from -30V. Never connect it to any other power supply which is unsuitable. Ensure program and settings match the battery pack, incorrect setting to /dis a battery may damage the battery, even would cause a fire. Protect r from dust, dirt and damp. Do not attempt to disassemble the r, contact the after sales center for maintenance if needed. Never place the r and batteries connected to it on any form of flammable surface. Never operate the r in the vicinity of inflammable material or gas. Ensure that there is an unrestricted airflow to and from the r's cooling slots. Never or dis any battery having evidence of leaking, expansion/swelling, damaged outer cover or case, color-change or distortion. Take great care to maintain correct battery polarity, and avoid shot-circuit. Read the battery manufacturer's instructions and adhere to them strictly. ERIES and MAX CHARGE CURRENT Battery Type No. of Cells Rated Voltage(V) Max Charge Current(A) Max Charge Current(A) for 300W for 00W Lipo LiFe LiIo NiMH

4 NiCd PB Lipo LiFe LiIo NiMH NiCd PB same as NiMH Voltage Level: 3.7V/cell Max Charge Voltage:.2V/cell Dis Voltage Cut off Level: 3.0V/cell or higher Voltage Level: 3.3V/cell Max Charge Voltage: 3.6V/cell Dis Voltage Cut off Level: 2.0V/cell or higher Voltage Level: 3.6V/cell Max Charge Voltage:.V/cell Dis Voltage Cut off Level: 2.7V/cell or higher Voltage Level:.2V/cell Max Charge Voltage:.6V/cell Dis Voltage Cut off Level: 0.85V/cell or higher Voltage Level:.2V/cell Max Charge Voltage:.6V/cell Dis Voltage Cut off Level:.0V/cell or higher Voltage Level: 2.0V/cell Max Charge Voltage: 2.5V/cell Dis Voltage Cut off Level:.75V/cell or higher *Select: turn left/right *Enter/Set/Stop: press STANDBY Menu standby LiPo Auto 0 00 a C 200 mv Sys Load Menu Monitor Start Default memory(the parameter setting of last work of the r) Press START r will directly work under default memory. Press LOAD, parameter will change to the memory you load, press START r will work under the setting of the memory. SYSTEM SETTING system setting Backlight contrast key safty temp sound time cut off on 0 99 min c cap cut off 5000 mah system setting Backlight contrast key safty temp sound time cut off on 0 99 min c cap cut off 5000 mah system setting Backlight contrast key safty temp sound time cut off on 0 99 min c cap cut off 5000 mah system setting Backlight contrast key safty temp sound time cut off on 0 99 min c cap cut off 5000 mah system setting Backlight contrast key safty temp sound time cut off on 0 99 min c cap cut off 5000 mah system setting Backlight contrast key safty temp sound time cut off on 0 99 min c cap cut off 5000 mah BACKLIGHT: Range from 0-00% CONTRAST: Range from 0-00% KEY SOUND: On/Off optional SAFTY TIME: Charge/dis time limit, range from minutes. Off=no limit. system setting I_V CUTOFF: I V cut off 00 v POWER LIMIT 250 w TEMPERATURE CUTOFF: Battery upper temperature limit. Range from C. Off=no limit. CAPACITY CUTOFF: Battery capacity protection. Range from mah. Off=no limit. Power supply protection. Range from -30 V. Default:V system setting POWER LIMIT: I V cut off 00 v POWER LIMIT 300 W Power supply protection. Range from W. Default:300W 7 8

5 CHARGE/ LIPO ERY *Select: turn left/right *Enter/Set/Stop: press Parameter setting TYPE lipo 0 00 a 200 MV TYPE lipo 0 00 a 200 MV BAT CELL V mr c I 2 60 v c o 2 70 v c a c mah c c STOP I 2 60 v o 2 70 v charging 69 a 958 mah STOP BAL_CHG: Balance (balance connector required) CHARGE: Normal (balance connector not required) FAST_CHG: Fast (balance connector not required) STORAGE: Charge or dis a battery according to the situation of the battery (balance connector optional) : Dis (balance connector optional) CYCLE: Charge and dis (balance connector optional) standby LiPo Auto 0 00 a C 200 mv Sys Load Menu Monitor Start TYPE lipo 0 00 a 200 MV TYPE lipo CELL CURRENT tvc 3800 MV TYPE lipo 3000 MV I 2 60 v o 2 70 v charging 69 a 958 mah STOP BAT CELL V mr c I 2 60 v c o 2 70 v c a c mah c c STOP I 2 60 v o 2 70 v DIScharging 69 a 58 mah STOP Select the cell count of the battery, range from -6. In balance mode, r can automatically detect the cell count of the battery. Important note: Except balance mode, r can not detect the correct cell count of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max /dis current. C-CUR: Range from , change unit: D-CUR: Dis current Range from , change unit: TYPE lipo CYCLE 0 00 a 200 MV 3000 MV sequence C D W TIME 0 MIN BAT CELL V mr c I 2 60 v c o 2 70 v c a c mah c c STOP Terminal Voltage Control. C-TVC: TVC of Charge Range from , change unit: 0, default: 200 D-TVC: TVC of Dis Range from , change unit: 0, default: 3000 (Storage mode range from , default: 3850) 9 0

6 SEQUENCE Only in Cycle mode, select the /dis sequence. C D: to dis D C: dis to Only in Cycle mode, set the waste time between /dis. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of /dis. Range from -9 times, change unit. Save the current setting to st-9th memory. Connect the battery, press, r will work under. Back to STANDBY menu. W-TIME SAVE Balance Charge Charge Fast Charge Storage Dis/ current Disd capacity Dis Dis/ current Disd capacity Cycle BAT CELL V mr c I 2 60 v c o 2 70 v c a c mah c c STOP Battery cells Cell internal resistance Cell voltage Cell voltage difference I 2 60 v o 2 70 v charging 69 a 958 mah STOP I 2 60 v o 2 70 v charging 69 a 958 mah STOP BAT CELL V mr c I 2 60 v c o 2 70 v c a c mah c c STOP I 2 60 v o 2 70 v DIScharging 69 a 58 mah STOP BAT CELL V mr c I 2 60 v c o 2 70 v c a c mah c c STOP Battery cells Cell voltage Cell voltage difference Cell internal resistance Work finshed I 2 60 v o 25 0 v FINISHed enter I 2 60 v o 25 0 v FINISHed enter I 2 60 v o 25 0 v FINISHed enter I 2 60 v o 23 0 v FINISHed 958 mah enter I 2 60 v o 20 0 v FINISHed 958 mah enter I 2 60 v o 20 0 v FINISHed enter 2

7 CHARGE/ LIFE ERY *Select: turn left/right *Enter/Set/Stop: press Parameter setting TYPE life 0 00 a 3600 MV TYPE life 0 00 a 3600 MV BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP I 2 60 v o 2 0 v charging 69 a 958 mah STOP BAL_CHG: Balance (balance connector required) CHARGE: Normal (balance connector not required) FAST_CHG: Fast (balance connector not required) STORAGE: Charge or dis a battery according to the situation of the battery (balance connector optional) : Dis (balance connector optional) CYCLE: Charge and dis (balance connector optional) standby LiPo Auto 0 00 a C 200 mv Sys Load Menu Monitor Start TYPE life 0 00 a 3600 MV TYPE life CELL CURRENT tvc 3300 MV TYPE life 2000 MV I 2 60 v o 2 0 v charging 69 a 958 mah STOP BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP I 2 60 v o 2 0 v DIScharging 69 a 58 mah STOP Select the cell count of the battery, range from -6. In balance mode, r can automatically detect the cell count of the battery. Important note: Except balance mode, r can not detect the correct cell count of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max /dis current. C-CUR: Range from , change unit: D-CUR: Dis current Range from , change unit: TYPE life CYCLE 0 00 a 3600 MV 2000 MV sequence C D W TIME 0 MIN BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP Terminal Voltage Control. C-TVC: TVC of Charge Range from , change unit: 0, default: 3600 D-TVC: TVC of Dis Range from , change unit: 0, default: 2000 (Storage mode range from , default: 3300) 3

8 SEQUENCE Only in Cycle mode, select the /dis sequence. C D: to dis D C: dis to Only in Cycle mode, set the waste time between /dis. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of /dis. Range from -9 times, change unit. Save the current setting to st-9th memory. Connect the battery, press, r will work under. Back to STANDBY menu. W-TIME SAVE Balance Charge Charge Fast Charge Storage Dis/ current Disd capacity Dis Dis/ current Disd capacity Cycle BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP Battery cells Cell internal resistance Cell voltage Cell voltage difference I 2 60 v o 2 0 v charging 69 a 958 mah STOP I 2 60 v o 2 0 v charging 69 a 958 mah STOP BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP I 2 60 v o 2 0 v DIScharging 69 a 58 mah STOP BAT CELL V mr CYCLE c I 2 60 v c o 2 0 v c a c mah c c STOP Battery cells Cell voltage Cell voltage difference Cell internal resistance Work finshed I 2 60 v o 2 50 v FINISHed enter I 2 60 v o 2 50 v FINISHed enter I 2 60 v o 2 50 v FINISHed enter I 2 60 v o 9 80 v FINISHed 958 mah enter I 2 60 v o 3 0 v FINISHed enter CYCLE I 2 60 v o 3 0 v FINISHed 958 mah enter 5 6

9 CHARGE/ LIIO ERY *Select: turn left/right *Enter/Set/Stop: press Parameter setting TYPE liio 0 00 a 00 MV TYPE liio 0 00 a 00 MV LiIO 6s BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP LiIO 6s I 2 60 v o 2 0 v charging 69 a 958 mah STOP BAL_CHG: Balance (balance connector required) CHARGE: Normal (balance connector not required) FAST_CHG: Fast (balance connector not required) STORAGE: Charge or dis a battery according to the situation of the battery (balance connector optional) : Dis (balance connector optional) CYCLE: Charge and dis (balance connector optional) standby LiPo Auto 0 00 a C 200 mv Sys Load Menu Monitor Start TYPE liio 0 00 a 00 MV TYPE liio CELL CURRENT tvc 3750 MV TYPE liio 2500 MV LiIO 6s I 2 60 v o 2 0 v charging 69 a 958 mah STOP LiIO 6s BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP LiIO 6s I 2 60 v o 2 0 v DIScharging 69 a 58 mah STOP Select the cell count of the battery, range from -6. In balance mode, r can automatically detect the cell count of the battery. Important note: Except balance mode, r can not detect the correct cell count of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max /dis current. C-CUR: Range from , change unit: D-CUR: Dis current Range from , change unit: TYPE liio CYCLE 0 00 a 00 MV 2500 MV sequence C D W TIME 0 MIN LiIO 6s BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP Terminal Voltage Control. C-TVC: TVC of Charge Range from , change unit: 0, default: 00 D-TVC: TVC of Dis Range from , change unit: 0, default: 2700 (Storage mode range from , default: 3750) 7 8

10 SEQUENCE Only in Cycle mode, select the /dis sequence. C D: to dis D C: dis to Only in Cycle mode, set the waste time between /dis. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of /dis. Range from -9 times, change unit. Save the current setting to st-9th memory. Connect the battery, press, r will work under. Back to STANDBY menu. W-TIME SAVE Balance Charge Charge Fast Charge Storage Dis/ current Disd capacity Dis Dis/ current Disd capacity Cycle BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP Battery cells Cell internal resistance Cell voltage Cell voltage difference I 2 60 v o 2 0 v charging 69 a 958 mah STOP I 2 60 v o 2 0 v charging 69 a 958 mah STOP BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP I 2 60 v o 2 0 v DIScharging 69 a 58 mah STOP BAT CELL V mr c I 2 60 v c o 2 0 v c a c mah c c STOP Battery cells Cell voltage Cell voltage difference Cell internal resistance Work finshed I 2 60 v o 2 50 v FINISHed enter I 2 60 v o 2 50 v FINISHed enter I 2 60 v o 2 50 v FINISHed enter I 2 60 v o v FINISHed 958 mah enter I 2 60 v o 7 0 v FINISHed 958 mah enter I 2 60 v o 7 0 v FINISHed enter 9 20

11 CHARGE/ NIMH ERY *Select: turn left/right *Enter/Set/Stop: press standby LiPo Auto 0 00 a C 200 mv NIMH Sys Load Menu Monitor Start Parameter setting TYPE nimh AUTO CHG 0 00 a TYPE nimh 5 s 000 MV TYPE nimh CYCLE 5 s 0 00 a 000 MV NIMH 5s TYPE nimh manu chg MANU chg I 2 60 v 0 00 a o 23 0 v charging 69 a 958 mah STOP SEQUENCE C W TIME D 0 MIN NIMH 5s auto chg I 2 60 v o 23 0 v charging 69 a 958 mah STOP NIMH 5s I 2 60 v o 23 0 v DIScharging 69 a 58 mah STOP NIMH 5s I 2 60 v o 23 0 v charging 69 a 958 mah STOP Select the cell count of the battery, range from -5. Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max /dis current. C-CUR: Range from , change unit: D-CUR: Dis current Range from , change unit: Terminal Voltage Control. D-TVC: TVC of Dis Range from , change unit: 0, default: 000 SEQUENCE Only in Cycle mode, select the /dis sequence. C D: to dis D C: dis to W-TIME Only in Cycle mode, set the waste time between /dis. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of /dis. Range from -9 times, change unit. SAVE Save the current setting to st-9th memory. AUTO_CHG: Auto Charge, the r will automatically the battery according to the situation of the battery, current will be adjust by the r but never over the setting. MANU_CHG: Manual Charge, the r will the battery by the setting current. : Dis CYCLE: Charge and dis Connect the battery, press, r will work under. Back to STANDBY menu. 2 22

12 CHARGE/ NICD ERY Auto_Charge NIMH 5s auto chg I 2 60 v o 23 0 v charging 69 a 958 mah STOP Work finshed NIMH 5s auto chg I 2 60 v o 2 20 v FINISHed enter *Select: turn left/right *Enter/Set/Stop: press Parameter setting TYPE nicd AUTO CHG 0 00 a Nicd 5s auto chg I 2 60 v o 23 0 v charging 69 a 958 mah STOP Manu_Charge Dis Dis/ current Disd capacity Cycle NIMH 5s NIMH 5s manu chg manu chg I 2 60 v I 2 60 v o 23 0 v charging o 2 20 v FINISHed 69 a 958 mah STOP enter NIMH 5s NIMH 5s I 2 60 v I 2 60 v o 23 0 v DIScharging o 6 0 v FINISHed 69 a 58 mah 958 mah STOP enter NIMH 5s NIMH 5s I 2 60 v I 2 60 v o 23 0 v charging o 6 0 v FINISHed 69 a 958 mah STOP enter standby LiPo Auto 0 00 a C 200 mv Sys Load Menu Monitor Start Nicd 5s TYPE nicd manu chg MANU chg I 2 60 v 0 00 a o 23 0 v charging 69 a 958 mah STOP TYPE nicd 5 s 000 MV TYPE nicd CYCLE 5 s 0 00 a 000 MV SEQUENCE C W TIME D 0 MIN Nicd 5s I 2 60 v o 23 0 v DIScharging 69 a 58 mah STOP Nicd 5s I 2 60 v o 23 0 v charging 69 a 958 mah STOP NICD AUTO_CHG: Auto Charge, the r will automatically the battery according to the situation of the battery, current will be adjust by the r but never over the setting. MANU_CHG: Manual Charge, the r will the battery by the setting current. : Dis CYCLE: Charge and dis 23 2

13 Select the cell count of the battery, range from -5. Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max /dis current. C-CUR: Range from , change unit: D-CUR: Dis current Range from , change unit: Terminal Voltage Control. D-TVC: TVC of Dis Range from , change unit: 0, default: 850 SEQUENCE Only in Cycle mode, select the /dis sequence. C D: to dis D C: dis to W-TIME Only in Cycle mode, set the waste time between /dis. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of /dis. Range from -9 times, change unit. SAVE Save the current setting to st-9th memory. Auto_Charge Manu_Charge Dis Dis/ current Disd capacity Cycle Work finshed Nicd 5s Nicd 5s auto chg auto chg I 2 60 v I 2 60 v o 23 0 v charging o 2 20 v FINISHed 69 a 958 mah STOP enter Nicd 5s Nicd 5s manu chg manu chg I 2 60 v I 2 60 v o 23 0 v charging o 2 20 v FINISHed 69 a 958 mah STOP enter Nicd 5s Nicd 5s I 2 60 v I 2 60 v o 23 0 v DIScharging o 3 80 v FINISHed 69 a 58 mah 958 mah STOP enter Nicd 5s Nicd 5s I 2 60 v I 2 60 v o 23 0 v charging o 3 80 v FINISHed 69 a 958 mah STOP enter Connect the battery, press, r will work under. Back to STANDBY menu

14 CHARGE/ PB ERY *Select: turn left/right *Enter/Set/Stop: press standby LiPo Auto 0 00 a C 200 mv Sys Load Menu Monitor Start Parameter setting TYPE PB CHARGE 0 s 0 00 a 200 MV TYPE PB 0 s 750 MV TYPE PB CYCLE 0 s 0 00 a 200 MV 750 MV sequence C D W TIME 0 MIN PB 0s manu chg I 2 60 v o 22 0 v charging 69 a 958 mah STOP PB 0s I 2 60 v o 22 0 v DIScharging 69 a 58 mah STOP PB 0s I 2 60 v o 22 0 v charging 69 a 958 mah STOP Select the max /dis current. C-CUR: Range from , change unit: D-CUR: Dis current Range from , change unit: Terminal Voltage Control. C-TVC: TVC of Charge Range from , change unit: 0, default: 200 D-TVC: TVC of Dis Range from , change unit: 0, default: 750 SEQUENCE Only in Cycle mode, select the /dis sequence. C D: to dis D C: dis to W-TIME Only in Cycle mode, set the waste time between /dis. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of /dis. Range from -9 times, change unit. PB: (Lead-acid battery) CHARGE: Charge : Dis CYCLE: Charge and dis SAVE Save the current setting to st-9th memory. Connect the battery, press, r will work under. Select the cell count of the battery, range from -0. Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Back to STANDBY menu

15 NOTES OF WORK STATUS Charge Dis Dis/ current Disd capacity Cycle Work finshed pb 0s pb 0s auto chg I 2 60 v I 2 60 v o 22 0 v charging o v FINISHed 69 a 958 mah STOP enter pb 0s pb 0s I 2 60 v I 2 60 v o 22 0 v DIScharging o 7 80 v FINISHed 69 a 58 mah 958 mah STOP enter pb 0s pb 0s I 2 60 v I 2 60 v o 22 0 v charging o 7 80 v FINISHed 69 a 958 mah STOP enter Note:, Press START or during working, if input voltage is higher than 30.0V, r will display HIGHER INPUT VOLTAGE along with Bi...Bi...Bi... sound..0v, r will display HIGHER INPUT VOLTAGE along with Bi...Bi...Bi... sound. 2, Press START or during working, if input voltage is lower than.0v, r will display LOWER INPUT VOLTAGE along with Bi...Bi...Bi... sound. 3, If output connection reverse, r will display REVERSE OUTPUT along with Bi...Bi...Bi... sound., If battery s total voltage is lower than the dis cutoff level, r will display LOWER TOTAL VOLTAGE along with Bi...Bi...Bi... sound. 5, If battery s cell voltage is lower than the dis cutoff level, r will display LOWER CELL VOLTAGE along with Bi...Bi...Bi... sound. 6, If battery detected by the r is different from your setting, r MAY display ERY ERROR along with Bi...Bi...Bi... sound. 7,Disconnect the cable during working status, r will display CONNECTION ERROR along with Bi...Bi...Bi... sound. 8, In BALCHARGE mode, disconnect the balance connector, r will display BALANCE ERROR along with Bi...Bi...Bi... sound. 9, In and STORAGE mode, plug in balance connector, r will display cell voltage. Disconnect the balance connector, r will display BALANCE ERROR along with Bi...Bi...Bi... sound. Remark:, Once the r report error, press ENTER to return STANDBY Menu. 2,Screen diagram shows in this manual only for reference, and will be different in each use

16 MONITOR Choose and enter Monitor, the r will monitoring the status of the voltage of the power supply, total/cell voltage of the battery. Voltage of power supply Total voltage of battery vpower 2 60 vbatt 2 0 TEMP 28 MONITOR c v c c a c c c c 08 0 AGAIN BACK ERY IN SERIES/PARALLEL CHARGE You can and balance several Lithium batteries at the same time, by using optional Series Adaptor or Parallel Adapter. Please note that the battery packs being d should have the close voltage, the same capacity and cell-count. Battery cells Cell voltage Cell voltage difference Note: press AGAIN r will monitor the status again, press BACK, to STANDBY menu. 3 32

17 WARRANTY CONFORMITY DECLARATION CASALRC C6G/C6G+/C8G provide a period of one year product warranty from the date of purchase. The warranty only applies to material or operational defects, which are present at the time of purchase. During that period, we will repair or replace free of service for products deemed defective due to those causes. This warranty is not valid for any damage or subsequent damage arising as a result of misuse, modification or as a result of failure to observe the use guideline in this manual. LIABILITY EXCLUSION CASALRC C6G/C6G+/C8G is designed and approved exclusively for the types of battery stated in this manual. CASALRC do not accept any liability if the r is used for any purpose other than that stated. We are unable to ensure you follow the instructions come with the r, and we have no control over the methods you employ for using, operating and maintaining this device. For this reason we are obliged to deny the liability for loss, damage or costs which are incurred due to the incompetent or incorrect use and operation of this product, or which are connected with such operation in any way. Unless otherwise prescribed by law, our obligation to pay compensation, regardless of the legal argument employed, is limited to the invoice value of those CASALRC products which were immediately and directly involved in the event in which the damage occurred. C6G/C6G+/C8G satisfies all relevant and mandatory EC directives and FCC Part 5 Subpart B: The product has been tested to meet the following technical standards: Application Test Standard Title Result CE-LVD CE-EMC FCC-VOC EN60335 EN550-:2006 For safety of household and similar electrical appliances. Electromagnetic compatibility-requirements for household appliances,electric tools and Similar apparaturs - Part : Emission Electromagnetic compatibility-requirements for household appliances,electric tools and EN550-2:997 +A:200 Similar apparaturs - Part 2: Immunity-Product family standard Electromagnetic compatibility (EMC) -- Part 6- : Generic standards - Immunity for EN (2007) residential, commercial and light-industrial environments. EN (2007) FCC Part 5B Electromagnetic compatibility (EMC) -- Part 6-3: Genericstandards - Emission standard for residential, commercial andlight-industrial environments. Electromagnetic compatibility (EMC), Conduction Emission & Radiation Emission Conform Conform Conform Conform Conform Conform This symbol means that you must dispose of electrical devices from the general household waste when it reaches the end of its useful life. Take your r to your local waste collection point or recycling centre. This applies to all countries of the European Union, and to other European countries with a separate waste collection system. SHENZHEN CASAL TECHNOLOGY CO.,LTD 33 3