INDEX PRODUCT CONTAINS

Transcription

1

2 FOREWORD INDEX FOREWORD p PRODUCT CONTAINS p OPTIONAL ACCESSORIES p3 SPECIFICATION p3 FEATURES p WARNING and NOTES p BATTERIES and MAX CURRENT p6- p8 /DIS LIPO BATTERY p9- /DIS LIFE BATTERY p3-6 /DIS LIIO BATTERY p-0 /DIS NIMH BATTERY p-3 /DIS NICD BATTERY p-6 /DIS PB BATTERY p-9 NOTES and REMARK of WORKING STATUS p30 MONITOR p3 BATTERY IN SERIES/PARALLEL p3 WARRANTY p33 LIABILITY EXCLUSION p33 CONFORMITY DECLARATION p3 Thank you for purchasing CASALRC C8G DC balance charger/discharger. For your convenience and safety, please read this manual carefully before using this product. It s a professional and high efficiency balance charger/discharger which is especially designed for charging/discharging LiPo, LiFe, LiIo, NiMH, NiCd and PB batteries. PRODUCT CONTAINS Below items are included in the package, contact your supplier if any item is miss. DC Input Clip Charger x DC Input Wire(AWG 0cm) 8x6 Pixel LCD Screen Cooling Fan Balance Port Charge Cable x Balance Socket adapter x Rubber feet xpcs Multi-Functional Switch *Select: turn left/right *Enter/Set/Stop: press Instruction Manual x Charge Output Socket Temperature Sensor Port

3 OPTIONAL ACCESSORIES FEATURES Parallel Adapter Temperature Sensor(magnet) xs in series Adapter x3s in series Adapter High efficiency synchronous DC-DC circuit. Special advanced charging technology ensure a fast and precision charging performance. The CASALRC C8G balance chargers series has a integrated cell balancer which can especially used for charging the LiPo, Lilo, LiFe, NiMH, NiCd and Pb batteries. 0 battery profile memories, default memory of latest profile, 9 custom memories can be save and load by the user. SPECIFICATION AM8G Input voltage range: v DC range: A Discharge current range: A Maximum charge power: 00W Maximum discharge power: 0W Current drain for balancing: 00mA Balance accuracy: <0mV LiPo/LiIo/LiFe battery cell count: -8 series NiCd/NiMH battery cell count: -0 series Pb battery cell count: - series (-V) Battery setup memories: 0 Temperature sensor: Yes Weight: 33g Dimension(LxWxD): X03X3mm 8x6 pixel LCD screen shows rich information: input voltage, output voltage, outputl current, charge capacity (mah), charge time, temperature, cell voltage, cell voltage difference etc. Various functional settings can meet a wide range of use. Balance charge, normal charge, fast charge, storage and discharge for Lithium batteries. auto- charge, manual-charge, cycle and discharge for NiCd/NiMH batteries. Charge, cycle and discharge for Pb batteries. Various system settings: backlight, contrast, key sound, safty time, temperature cutoff, capacity cutoff, power limited and input voltage cutoff. Full protection system: protection of reversed polarity (input and output), higher/lower input voltage, power supplymbattery temperature, over charge/discharge and time limited. 3

4 WARNING and NOTES CASALRC 8G is ONLY suitable for charge rechargeable LiPo, LiFe, LiIo,NiMH and PB batteries. Do not attempt to charge dry cells. Charge other types of batteries may cause fire or explosion. Never leave the charger unattended when it is working. If you leave, disconnect the battery to prevent any unexpected dangerous or damage. The prescript DC input voltage range from -30V. Never connect it to any other power supply which is unsuitable. Ensure program and settings match the battery pack, incorrect setting to charge/discharge a battery may damage the battery, even would cause a fire. Protect charger from dust, dirt and damp. Do not attempt to disassemble the charger, contact the after sales center for maintenance if needed. Never place the charger and batteries connected to it on any form of flammable surface. Never operate the charger in the vicinity of inflammable material or gas. Ensure that there is an unrestricted airflow to and from the charger's cooling slots. Never charge or discharge any battery having evidence of leaking, expansion/swelling, damaged outer cover or case, color-change or distortion. Take great care to maintain correct battery polarity, and avoid shot-circuit. Read the battery manufacturer's instructions and adhere to them strictly. BATTERIES and MAX CURRENT B attery T yp e N o. o f C ells R ated Voltag e(v) M ax C harg e C urrent(a) fo r 00W L ip o L if e L iio N im H

5 NiCd PB Lipo LiFe LiIo NiMH NiCd PB, 0,0 3,6 0,0 6,8 0,0 8 0,0 6 9, 0,0 0, 9,6 8,6 8, 9,8, 0 6, same as NiMH 0,0 0, ,0 8 0,0 0 0,0 6 0,0 0, , , ,0 8, 6, Voltage Level: 3.V/cell Max Charge Voltage:.V/cell Discharge Voltage Cut off Level: 3.0V/cell or higher Voltage Level: 3.3V/cell Max Charge Voltage: 3.6V/cell Discharge Voltage Cut off Level:.0V/cell or higher Voltage Level: 3.6V/cell Max Charge Voltage:.V/cell Discharge Voltage Cut off Level:.V/cell or higher Voltage Level:.V/cell Max Charge Voltage:.6V/cell Discharge Voltage Cut off Level: 0.8V/cell or higher Voltage Level:.V/cell Max Charge Voltage:.6V/cell Discharge Voltage Cut off Level:.0V/cell or higher Voltage Level:.0V/cell Max Charge Voltage:.V/cell Discharge Voltage Cut off Level:.V/cell or higher *Select: turn left/right *Enter/Set/Stop: press STANDBY Menu STANDBY LIPO AUTO 0 00 A C 00 MV Sys Load Menu Monitor Start Default memory(the parameter setting of last work of the charger) Press charger will directly work under default memory. Press LOAD, parameter will change to the memory you load, press charger will work under the setting of the memory. LIGHT CONTRAST KEY SOUND on SAFTY TEMP TIME CUTOFF 0 99 MIN C CAP CUTOFF 000 MAH LIGHT CONTRAST KEY SOUND ON SAFTY TEMP TIME CUTOFF 0 99 MIN C CAP CUTOFF 000 MAH LIGHT CONTRAST KEY SOUND ON SAFTY TEMP TIME CUTOFF 0 99 MIN C CAP CUTOFF 000 MAH LIGHT CONTRAST KEY SOUND ON SAFTY TEMP TIME CUTOFF 0 99 MIN C CAP CUTOFF 000 MAH Backlight LIGHT CONTRAST KEY SOUND on SAFTY TEMP TIME CUTOFF 0 99 MIN C CAP CUTOFF 000 MAH LIGHT CONTRAST KEY SOUND ON SAFTY TEMP TIME CUTOFF 0 99 MIN C CAP CUTOFF 000 MAH save I V CUTOFF 00 V POWER LIMIT 0 W I V CUTOFF 00 V POWER LIMIT 300 W LIGHT: Range from 0-00% CONTRAST: Range from 0-00% KEY SOUND: On/Off optional SAFTY TIME: Charge/discharge time limit, range from minutes. Off=no limit. TEMPERATURE CUTOFF: Battery upper temperature limit. Range from 0-00 C. Off=no limit. CAPACITY CUTOFF: Battery capacity protection. Range from mah. Off=no limit. I_V CUTOFF: Power supply protection. Range from -30 V. Default:V POWER LIMIT: Power supply protection. Range from W. Default:300W 8

6 /DIS LIPO BATTERY *Select: turn left/right *Enter/Set/Stop: press Parameter setting BATT TYPE LIPO 0 00 A 00 MV BATT TYPE LIPO 0 00 A 00 MV BAT CELL mv C I 60 V C 3 O 0 V C A C3 98 MAH C 0 8 C C STOP I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP BAL_CHG: Balance charge(balance connector required) : Normal charge (balance connector not required) FAST_CHG: Fast charge (balance connector not required) STORAGE: Charge or discharge a battery according to the situation of the battery (balance connector optional) DIS: Discharge (balance connector optional) : Charge and discharge (balance connector optional) STANDBY LIPO Auto 0 00 A C 00 MV Sys Load Menu Monitor Start BATT TYPE LIPO 0 00 A 00 MV BATT TYPE LIPO STORAGE CELL CURRENT 00 A TVC 3800 MV BATT TYPE LIPO DIS 00 A 3000 MV FAST CH G I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP BAT CELL mv STORAGE C I 60 V C 3 O 0 V C A C3 8 MAH C 0 8 C C STOP STORAGE I 60 V O 0 V DISCHARGING 69 A 8 MAH 8 C STOP Select the cell count of the battery, range from -6. In balance charge mode, charger can automatically detect the cell count of the battery. Important note: Except balance charge mode, charger can not detect the correct cell count of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max charge/discharge current. C-CUR: Range from , change unit: D-CUR: Discharge current Range from , change unit: BATT TYPE LIPO 0 00 A 00 MV 00 A 3000 MV SEQUENCE C D W TIME 0 MIN BAT CELL mv C I 60 V C 3 O 0 V C A C3 98 MAH C 0 8 C C STOP Terminal Voltage Control. C-TVC: TVC of Charge Range from 00-0, change unit: 0, default: 00 D-TVC: TVC of Discharge Range from 00-00, change unit: 0, default: 3000 (Storage mode range from , default: 380) 9 0

7 SEQUENCE Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge Balance Charge BAT CELL mv C I 60 V C 3 O 0 V C A C3 98 MAH C 0 8 C C STOP Work finshed I 60 V O 0 V FINISHED 08 MAH 8 C ENTER Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of charge/discharge cycle. Range from -9 times, change unit. Save the current setting to st-9th memory. Connect the battery, press start, charger will work under present setting. Back to STANDBY menu. W-TIME Charge Fast Charge Storage Discharge/ current Discharged capacity Discharge Discharge/ current Discharged capacity Cycle Battery cells Cell internal resistance Cell voltage Cell voltage difference I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP BAT CELL mv STORAGE C I 60 V C 3 O 0 V C A C3 8 MAH C 0 8 C C STOP DIS I 60 V O 0 V DISCHARGING 69 A 8 MAH 8 C BAT CELL mv C I 60 V C 3 O 0 V C A C3 98 MAH C 0 8 C C STOP Battery cells Cell voltage Cell voltage difference Cell internal resistance I 60 V O 0 V FINISHED 08 MAH 8 C ENTER I 60 V O 0 V FINISHED 08 MAH 8 C ENTER STORAGE I 60 V O 3 0 V FINISHED 98 MAH 8 C ENTER DIS I 60 V O 0 0 V FINISHED 98 MAH 8 C ENTER LiPo 6S I 60 V O 0 0 V FINISHED 08 MAH 8 C ENTER

8 /DIS LIFE BATTERY *Select: turn left/right *Enter/Set/Stop: press Parameter setting BATT TYPE LIFE 0 00 A 3600 MV BATT TYPE LIFE 0 00 A 3600 MV BAT CELL mv C I 60 V C 33 O 0 V C A C MAH C 30 8 C C STOP I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP BAL_CHG: Balance charge(balance connector required) : Normal charge (balance connector not required) FAST_CHG: Fast charge (balance connector not required) STORAGE: Charge or discharge a battery according to the situation of the battery (balance connector optional) DIS: Discharge (balance connector optional) : Charge and discharge (balance connector optional) STANDBY LIPO AUTO 0 00 A C 00 MV Sys Load Menu Monitor Start BATT TYPE LIFE 0 00 A 3600 MV BATT TYPE LIFE STORAGE CELL CURRENT 00 A TVC 3300 MV BATT TYPE LIFE DIS 00 A 000 MV I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP BAT CELL mv STORAGE C I 60 V C 33 O 0 V C A C3 3 8 MAH C 30 8 C C STOP STORAGE I 60 V O 0 V DISCHARGING 69 A 8 MAH 8 C STOP Select the cell count of the battery, range from -6. In balance charge mode, charger can automatically detect the cell count of the battery. Important note: Except balance charge mode, charger can not detect the correct cell count of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max charge/discharge current. C-CUR: Range from , change unit: D-CUR: Discharge current Range from , change unit: BATT TYPE LIFE 0 00 A 3600 MV 00 A 000 MV SEQUENCE C D W TIME 0 MIN BAT CELL mv C I 60 V C 33 O 0 V C A C MAH C 30 8 C C STOP Terminal Voltage Control. C-TVC: TVC of Charge Range from , change unit: 0, default: 3600 D-TVC: TVC of Discharge Range from , change unit: 0, default: 000 (Storage mode range from , default: 3300) 3

9 SEQUENCE Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of charge/discharge cycle. Range from -9 times, change unit. Save the current setting to st-9th memory. Connect the battery, press start, charger will work under present setting. Back to STANDBY menu. W-TIME Balance Charge Charge Fast Charge Storage Discharge/ current Discharged capacity Discharge Discharge/ current Discharged capacity Cycle BAT CELL mv C I 60 V C 33 O 0 V C A C MAH C 30 8 C C STOP Battery cells Cell voltage I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP Battery cells Cell voltage BAT CELL mv STORAGE C I 60 V C 33 O 0 V C A C3 3 8 MAH C 30 8 C C STOP DIS I 60 V O 0 V DISCHARGING 69 A 8 MAH 8 C STOP BAT CELL mv C I 60 V C 33 O 0 V C A C MAH C 30 8 C C STOP Zellen Innenwiederstand Zellenspannungsdifferenz Cell voltage difference Cell internal resistance Work finshed I 60 V O 0 V FINISHED 08 MAH 8 C ENTER I 60 V O 0 V FINISHED 08 MAH 8 C ENTER I 60 V O 0 V FINISHED 08 MAH 8 C ENTER STORAGE I 60 V O 9 80 V FINISHED 98 MAH 8 C ENTER DIS I 60 V O 3 0 V FINISHED 08 MAH 8 C ENTER I 60 V O 3 0 V FINISHED 98 MAH 8 C ENTER 6

10 /DIS LIIO BATTERY *Select: turn left/right *Enter/Set/Stop: press Parameter setting BATT TYPE LIIO 0 00 A 00 MV BATT TYPE LIIO 0 00 A 00 MV LIIO 6S BAT CELL mv C I 60 V C 03 O 0 V C A C MAH C 00 8 C C STOP LIIO 6S I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP BAL_CHG: Balance charge(balance connector required) : Normal charge (balance connector not required) FAST_CHG: Fast charge (balance connector not required) STORAGE: Charge or discharge a battery according to the situation of the battery (balance connector optional) DIS: Discharge (balance connector optional) : Charge and discharge (balance connector optional) STANDBY LIPO AUTO 0 00 A C 00 MV Sys Load Menu Monitor Start BATT TYPE LIIO 0 00 A 00 MV BATT TYPE LIIO STORAGE CELL CURRENT 00 A TVC 30 MV save BATT TYPE LIIO DIS 00 A 00 MV LIIO 6S I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP LIIO 6S BAT CELL mv STORAGE C I 60 V C 03 O 0 V C A C3 0 8 MAH C 00 8 C C STOP LIIO 6S STORAGE I 60 V O 0 V DISCHARGING 69 A 8 MAH 8 C STOP Select the cell count of the battery, range from -6. In balance charge mode, charger can automatically detect the cell count of the battery. Important note: Except balance charge mode, charger can not detect the correct cell count of the battery which has voltage intersection with the other one. So the cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max charge/discharge current. C-CUR: Range from , change unit: D-CUR: Discharge current Range from , change unit: BATT TYPE LIIO 0 00 A 00 MV 00 A 00 MV SEQUENCE C D W TIME 0 MIN LIIO 6S BAT CELL mv C I 60 V C 33 O 0 V C A C MAH C 30 8 C C STOP Terminal Voltage Control. C-TVC: TVC of Charge Range from 000-0, change unit: 0, default: 00 D-TVC: TVC of Discharge Range from 00-00, change unit: 0, default: 00 (Storage mode range from , default: 30) 8

11 SEQUENCE Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of charge/discharge cycle. Range from -9 times, change unit. Save the current setting to st-9th memory. Connect the battery, press start, charger will work under present setting. Back to STANDBY menu. W-TIME Balance Charge Charge Fast Charge Storage Discharge/ current Discharged capacity Discharge Discharge/ current Discharged capacity Cycle LIIO 6S BAT CELL mv C I 60 V C 03 O 0 V C A C MAH C 00 8 C C STOP Battery cells Cell internal resistance Cell voltage Cell voltage difference LIIO 6S I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP LIIO 6S I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP Battery cells Cell voltage LIIO 6S BAT CELL mv STORAGE C I 60 V C 03 O 0 V C A C3 0 8 MAH C 00 8 C C STOP LIIO 6S DIS I 60 V O 0 V DISCHARGING 69 A 8 MAH 8 C STOP LIIO 6S BAT CELL mv C I 60 V C 03 O 0 V C A C MAH C 00 8 C C STOP Cell voltage difference Cell internal resistance Work finshed LILO 6S I 60 V O 0 V FINISHED 08 MAH 8 C ENTER LILO 6S I 60 V O 0 V FINISHED 08 MAH 8 C ENTER LILO 6S I 60 V O 0 V FINISHED 08 MAH 8 C ENTER LILO 6S STORAGE I 60 V O 0 V FINISHED 98 MAH 8 C ENTER LILO 6S DIS I 60 V O 0 V FINISHED 98 MAH 8 C ENTER LILO 6S I 60 V O 0 V FINISHED 08 MAH 8 C ENTER 9 0

12 /DIS NIMH BATTERY *Select: turn left/right *Enter/Set/Stop: press STANDBY LIPO AUTO 0 00 A C 00 MV NIMH Sys Load Menu Monitor Start Parameter setting BATT TYPE NIMH AUTO CHG 0 00 A BATT TYPE NIMH DIS CELLs S 00 A 000 MV BATT TYPE NIMH S 0 00 A 00 A 000 MV NIMH S BATT TYPE NIMH MANU CHG MANU CHG I 60 V 0 00 A O 3 0 V CHARGING 69 A 98 MAH 8 c STOP SEQUENCE C D W TIME 0 MIN NIMH S AUTO CHG I 60 V O 3 0 V CHARGING 69 A 98 MAH 8 C STOP NIMH S DIS I 60 V O 3 0 V DISCHARGING 69 A 8 MAH 8 C STOP NIMH S I 60 V O 3 0 V CHARGING 69 A 98 MAH 8 C STOP Select the cell count of the battery, range from -. Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max charge/discharge current. C-CUR: Range from , change unit: D-CUR: Discharge current Range from , change unit: Terminal Voltage Control. D-TVC: TVC of Discharge Range from , change unit: 0, default: 000 SEQUENCE Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge W-TIME Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of charge/discharge cycle. Range from -9 times, change unit. Save the current setting to st-9th memory. AUTO_CHG: Auto Charge, the charger will automatically charge the battery according to the situation of the battery, current will be adjust by the charger but never over the setting. MANU_CHG: Manual Charge, the charger will charge the battery by the setting current. DIS: Discharge : Charge and discharge Connect the battery, press start, charger will work under present setting. Back to STANDBY menu.

13 /DIS NICD BATTERY Auto_Charge NIMH S AUTO CHG I 60 V o 3 0 V CHARGING 69 A 98 MAH 8 C STOP Work finshed NIMH S AUTO CHG I 60 V O 0 V FINISHED 08 MAH 8 C ENTER *Select: turn left/right *Enter/Set/Stop: press Parameter setting BATT TYPE NICD AUTO CHG 0 00 A NICD S AUTO CHG I 60 V O 3 0 V CHARGING 69 A 98 MAH 8 C STOP Manu_Charge Discharge Discharge/ current Discharged capacity Cycle NIMH S NIMH S MANU CHG MANU CHG I 60 V I 60 V o 3 0 V CHARGING O 0 V FINISHED 69 A 98 MAH 08 MAH 8 C 8 C STOP enter NIMH S NIMH S DIS DIS I 60 V I 60 V O 3 0 V DISCHARGING O 6 0 V FINISHED 69 A 8 MAH 98 MAH 8 C 8 C STOP ENTER NIMH S NIMH S I 60 V I 60 V O 3 0 V CHARGING O 6 0 V FINISHED 69 A 98 MAH 08 MAH 8 C 8 C STOP ENTER STANDBY LIPO AUTO 0 00 A C 00 MV Sys Load Menu Monitor Start NICD S BATT TYPE NICD MANU CHG MANU CHG I 60 V 0 00 A O 3 0 V CHARGING 69 A 98 MAH 8 C STOP BATT TYPE NICD DIS S 00 A 000 MV BATT TYPE NICD CELLs S 0 00 A 00 A 000 MV SEQUENCE C D W TIME 0 MIN Nicd S DIS I 60 V O 3 0 V DISCHARGING 69 A 8 MAH 8 C STOP NICD S I 60 V O 3 0 V CHARGING 69 A 98 MAH 8 C STOP NICD AUTO_CHG: Auto Charge, the charger will automatically charge the battery according to the situation of the battery, current will be adjust by the charger but never over the setting. MANU_CHG: Manual Charge, the charger will charge the battery by the setting current. DIS: Discharge : Charge and discharge 3

14 Select the cell count of the battery, range from -. Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Select the max charge/discharge current. C-CUR: Range from , change unit: D-CUR: Discharge current Range from , change unit: Terminal Voltage Control. D-TVC: TVC of Discharge Range from 60-00, change unit: 0, default: 80 SEQUENCE Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge W-TIME Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of charge/discharge cycle. Range from -9 times, change unit. Save the current setting to st-9th memory. Auto_Charge Manu_Charge Discharge Discharge/ current Discharged capacity Cycle Work finshed NICD S NICD S AUTO CHG AUTO CHG I 60 V I 60 V O 3 0 V charging O 0 V FINISHED 69 A 98 MAH 08 MAH 8 C 8 C STOP ENTER NICD S NICD S MANU CHG MANU CHG I 60 V I 60 V O 3 0 V CHARGING O 0 V FINISHED 69 A 98 MAH 08 MAH 8 C 8 C STOP ENTER NICD S NICD S DIS DIS I 60 V I 60 V O 3 0 V DISCHARGING O 3 80 V FINISHED 69 A 8 MAH 98 MAH 8 C 8 C STOP ENTER NICD S NICD S I 60 V I 60 V O 3 0 V CHARGING O 3 80 V FINISHED 69 A 98 MAH 08 MAH 8 C 8 C STOP ENTER Connect the battery, press start, charger will work under present setting. Back to STANDBY menu. 6

15 /DIS PB BATTERY *Select: turn left/right *Enter/Set/Stop: press STANDBY LIPO AUTO 0 00 A C 00 MV Sys Load Menu Monitor Start Parameter setting BATT TYPE PB 0 S 0 00 A 00 MV BATT TYPE PB DIS 0 S 00 A 0 MV BATT TYPE PB 0 S 0 00 A 00 A 00 MV 0 MV SEQUENCE C D W TIME 0 MIN PB 0S MANU CHG I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP PB 0S DIS I 60 V O 0 V DISCHARGING 69 A 8 MAH 8 C STOP PB 0S I 60 V O 0 V CHARGING 69 A 98 MAH 8 C STOP Select the max charge/discharge current. C-CUR: Range from , change unit: D-CUR: Discharge current Range from , change unit: Terminal Voltage Control. C-TVC: TVC of Charge Range from 300-0, change unit: 0, default: 00 D-TVC: TVC of Discharge Range from 0-90, change unit: 0, default: 0 SEQUENCE Only in Cycle mode, select the charge/discharge sequence. C D: charge to discharge D C: discharge to charge W-TIME Only in Cycle mode, set the waste time between charge/discharge. Range from 0-60 minutes, change unit. Only in Cycle mode, set the times of charge/discharge cycle. Range from -9 times, change unit. PB: (Lead-acid battery) : Charge DIS: Discharge : Charge and discharge Save the current setting to st-9th memory. Connect the battery, press start, charger will work under present setting. Select the cell count of the battery, range from -0. Important note: The cell count you sellect must be exact the same as your battery, otherwise may cause dangerous situation. Back to STANDBY menu. 8

16 NOTES OF WORK STATUS Charge Discharge Discharge/ current Discharged capacity Cycle Work finshed PB 0S PB 0S AUTO CHG I 60 V I 60 V O 0 V CHARGING O 3 90 V FINISHED 69 A 98 MAH 08 MAH 8 C 8 C STOP ENTER PB 0S PB 0S DIS DIS I 60 V I 60 V O 0 V DISCHARGING O 80 V FINISHED 69 A 8 MAH 98 MAH 8 C 8 C STOP ENTER PB 0S PB 0S I 60 V I 60 V O 0 V CHARGING O 80 V FINISHED 69 A 98 MAH 08 MAH 8 C 8 C STOP ENTER Note:, Press or during working, if input voltage is higher than 30.0V, charger will display HIGHER INPUT VOLTAGE along with Bi...Bi...Bi... sound..0v, charger will display HIGHER INPUT VOLTAGE along with Bi...Bi...Bi... sound., Press or during working, if input voltage is lower than.0v, charger will display LOWER INPUT VOLTAGE along with Bi...Bi...Bi... sound. 3, If output connection reverse, charger will display REVERSE OUTPUT along with Bi...Bi...Bi... sound., If battery s total voltage is lower than the discharge cutoff level, charger will display LOWER TOTAL VOLTAGE along with Bi...Bi...Bi... sound., If battery s cell voltage is lower than the discharge cutoff level, charger will display LOWER CELL VOLTAGE along with Bi...Bi...Bi... sound. 6, If battery detected by the charger is different from your setting, charger MAY display BATTERY ERROR along with Bi...Bi...Bi... sound.,disconnect the charge cable during working status, charger will display CONNECTION ERROR along with Bi...Bi...Bi... sound. 8, In BAL mode, disconnect the balance connector, charger will display BALANCE ERROR along with Bi...Bi...Bi... sound. 9, In DIS and STORAGE mode, plug in balance connector, charger will display cell voltage. Disconnect the balance connector, charger will display BALANCE ERROR along with Bi...Bi...Bi... sound. Remark:, Once the charger report error, press ENTER to return STANDBY Menu.,Screen diagram shows in this manual only for reference, and will be different in each use. 9 30

17 MONITOR Choose and enter Monitor, the charger will monitoring the status of the voltage of the power supply, total/cell voltage of the battery. Voltage of power supply Total voltage of battery VPOWER 60 VBATT 0 TEMP 8 MONITOR C V C 03 C 030 A C3 0 C 00 C C 08 0 AGAIN BATTERY IN SERIES/PARALLEL You can charge and balance several Lithium batteries at the same time, by using optional Series Adaptor or Parallel Adapter. Please note that the battery packs being charged should have the close voltage, the same capacity and cell-count. Battery cells Cell voltage Cell voltage difference Note: press AGAIN charger will monitor the status again, press, back to STANDBY menu. 3 3

18 WARRANTY CASALRC C8G provide a period of one year product warranty from the date of purchase. The warranty only applies to material or operational defects, which are present at the time of purchase. During that period, we will repair or replace free of service charge for products deemed defective due to those causes. This warranty is not valid for any damage or subsequent damage arising as a result of misuse, modification or as a result of failure to observe the use guideline in this manual. LIABILITY EXCLUSION CASALRC C8G is designed and approved exclusively for charge the types of battery stated in this manual. CASALRC do not accept any liability if the charger is used for any purpose other than that stated. We are unable to ensure you follow the instructions come with the charger, and we have no control over the methods you employ for using, operating and maintaining this device. For this reason we are obliged to deny the liability for loss, damage or costs which are incurred due to the incompetent or incorrect use and operation of this product, or which are connected with such operation in any way. Unless otherwise prescribed by law, our obligation to pay compensation, regardless of the legal argument employed, is limited to the invoice value of those CASALRC products which were immediately and directly involved in the event in which the damage occurred. CONFORMITY DECLARATION AM8G satisfies all relevant and mandatory EC directives and FCC Part Subpart B: 008. The product has been tested to meet the following technical standards: Application Test Standard Title Result CE-LVD CE-EMC FCC-VOC EN6033 EN0-:006 EN0-:99 +A:00 EN (00) EN (00) FCC Part B For safety of household and similar electrical appliances. Electromagnetic compatibility-requirements for household appliances,electric tools and Similar apparaturs - Part : Emission Electromagnetic compatibility-requirements for household appliances,electric tools and Similar apparaturs - Part : Immunity-Product family standard Electromagnetic compatibility (EMC) -- Part 6-: Generic standards - Immunity for residential, commercial and light-industrial environments. Electromagnetic compatibility (EMC) -- Part 6-3: Genericstandards - Emission standard for residential, commercial andlight-industrial environments. Electromagnetic compatibility (EMC), Conduction Emission & Radiation Emission Conform Conform Conform Conform Conform Conform This symbol means that you must dispose of electrical devices from the general household waste when it reaches the end of its useful life. Take your charger to your local waste collection point or recycling centre. This applies to all countries of the European Union, and to other European countries with a separate waste collection system. 33 3