Package Diagram. Warning: Blade B. Body. Blade A. Motor (Reverse) Blade A. USB charging cable. Motor (Forward) Blade B

Size: px

Start display at page:

Download "Package Diagram. Warning: Blade B. Body. Blade A. Motor (Reverse) Blade A. USB charging cable. Motor (Forward) Blade B"

Andrew Harrell
5 years ago
Views:

1 Instruction Manual

2 Package Diagram Blade A Body Blade B Motor (Reverse) Blade A USB charging cable Motor (Forward) Blade B Motor (Reverse) Motor (Forward) 3.7V Lithium rechargeable battery Speed Mode Button Throttle trim Acceleration Lever Turning Trim Power Indicator Power Switch Flip Button Forward/Backward Trimming Direction Lever Fly Side Trimming Warning: Follow instructions included in this package. Do not assemble without adult supervision. Product contrains small parts that may be hazardous to children. Only charge product with the charger provided in this package. Disconnect product before cleaning the charger. Do not recharge non-rechargeable batteries. Only charge batteries under adult supervision. Do not mix old and new, or different types of batteries. Promptly remove depleted batteries. Do not short circuit or disassemble batteries. Remove batteries if the product will not be used for a long time to prevent battery damage. Do not bump or drop the product or remote control. Do not touch rotating parts to avoid injury. Only clean product with a clean, soft cloth. User is responsible to ensure product will not cause harm to self or others, or damage to personal property. Manufacturers and distributors do not take any responsibility. Please retain packaging and instruction manual for future reference. 1

Remote Control Battery Installation Remove the remote control s battery cover and install 4 AAA batteries (not included) according to the correct polarity.

3 Remote Control Battery Installation Remove the remote control s battery cover and install 4 AAA batteries (not included) according to the correct polarity. Reattach the battery cover and tightly fasten the screws. NOTE: See diagram for correct polarity. Do not mix old and new batteries. NOTE: Before charging, remote battery from the quad. Charging the Quad s Battery To charge the battery: 1. Remove the lithium battery as shown in Figures A and B. 2. Plug the USB charging cable into the USB port of your computer. The indicator light on the cable will turn on. 3. Connect the cable to the battery connector. The USB light will turn off indicating the quad is now charging. 4. When finished, the USB light will again turn on. Disconnect and reinstall the battery into the quad. Charging time is appoximitely 90 minutes. Figure A Figure B USB indicator USB charging cable Figure C Battery Cautions: If battery becomes hot during charging process, stop immediately to avoid battery damage or possible fire. Do not set battery next to high heat or flammable materials. If battery starts to emit strange odor, deformation, discoloration, or other anomolies, stop using this battery. If battery leaks, avoid contact with skin and eyes. If contact is made, immediately rinse with cold water and seek medical attention. Discontinue use of battery. Only use charger provided with product to charge battery. Do not put battery into fire, microwave over, or pressure tank. Do not use solvents, industrial alcohol, or other flammable substances to clean product or charger. Product is composed of plastics, electronic components, and batteries. Follow local garbage collection requirements when discarding. 2

4 Syncing the Quad and Remote 1. Connect the battery to the quad. Turn the power switch on and place the quad on flat ground. The quad s lights will be flashing rapidly. 2. Make sure the acceleration lever on the remote is at its lowest position. Turn the controller on, and you will hear it beep twice. The quad s lights will begin flashing more slowly. Push the acceleration lever all the way up and then back down. The remote will beep once, and the the lights on the quad will stay lit. The quad and remote are now synced. You are ready to fly your quad! Note: The blue lights on the quad are the forward direction Flight Tips: Use the slow speed mode for flying inside. Avoid obstacles, pets, and people. Use the fast speed mode for flying outdoots. Do not fly in windy or rainy weather. Flight Warnings: Do not fly quadcopter in inclement weather. Flying quadcopters within 3 miles of an airport is prohibited. Quadcopter s range is 200 feet. Do not fly quad outside of this range. Exceeding range may cause damage to your quad. Stand 10 feet behind quad when taking off. For best control when flying, it is recommended the pilot always stays behind the quad when possible. Flying the Quadcopter Basic Flying Maneuvers: Ascend Push accelerator lever up, quad will ascend. Push accelerator lever down, quad will descend. Descend Turn Left Turn Right Push accelerator lever left, quad will turn left. Push accelerator lever right, quad will turn right. Forward Backward Push direction lever up, quad will fly forward. Push direction lever down, quad will fly backward. Sidefly Left Sidefly Right Push direction lever left, quad will fly left. Push direction lever right, quad will fly right. 3

5 Flip Mode: Press the Flip Button. Remote control will beep. Front Flip Push direction lever up, quad will flip forward. Press the Flip Button. Remote control will beep. NOTE: Fly quad to 5 feet in the air to safely do flips. Back Flip Left Roll Right Roll Push direction lever down, quad will flip backward. Push direction lever left, quad will roll left. Push direction lever left, quad will roll left. Trimming the Quadcopter Gently push the acceleration lever until the quad is about 3 feet off the ground. If the quad favors any direction, you can trim the motors so it flies with more balance. Note: When the quad is flying an inch off the ground, it is affected by blade vortex and becomes unstable. Fly at a higher altitude to better trim the quad. Turn left Turn right When quad spins left, press right button until it flies straight. When quad spins right, press left button until it flies straight. Forward Backward When quad leans forward, press back button until it flies straight. When quad leans back, press forward button until it flies straight. Left Right When quad leans left, press right button until it flies straight. When quad leans right, press left button until it flies straight. Press the speed button to switch to high gear If the quad cannt take off, you can reset the quad to fix this. Switch the speed to high speed. Hold both levers down and to the left then release. The indicator will rapidly flash. Once the indicator is lit, the correction is complete. 4

6 Flight Exercises After enough practice, try the following exercises: Fixed rotation (turning) Straight ahead - turn left - forward - turn left - forward - left, practice flying a square pattern. Landing in designated locations (point landing) Forward - backward - to the left - to the right to complete a cross action Troubleshooting Problem Cause Solution Quad turns on, but can t fly 1. Remote or quad have poor power supply. 2. Remote and quad are not synced. 1. Reinstall fully charged batteries. 2. Resync remote and quad. Quad shakes violently 1. Rotor deformation 2. Hollow shaft is bent 1. Replace corresponding wing 2. Replace hollow shaft Quad takes off to one side 1. Rotor deformation 2. Motor damage 3. Aircraft was not flat when synced with remote 1. Replace corresponding wing 2. Replace motor 3. Resync quad and remote on flat surface Quad flies out of control 1. Quad is beyond control range 2. Multiple quads were synced at the same time 1. Fly quad within 200 foot flight range 2. Sync your quad independently, one by one Quad cannot fly faster 1. Rotor rotation speed is too slow 2. Quad battery is low 1. Slowly push up on accelerator lever 2. Recharge battery Quad lands too fast and crashes Pilot quickly pulled back the acceleration lever Slowly lower the acceleration lever when landing 5

7 Notes: 1. Control range will be affected when the remote control runs low on battery power. 2. If battery power is too low, the quad will have trouble taking off. 3. If quad appears damaged, promptly repair. Do not fly near trees, people, obstacles, or in high winds to avoid damage. 4. Remove the batteries during long term non usage to prevent battery leakage and damage. 5. Avoid high altitude or high impact collisions in order to prevent damage. Inventory and Product Parameters: Inventory Checklist: 1x Quadcopter, 1x Remote Controller, 1x 3.7V Lithium Battery, 1x USB Charging Cable, 1x Instruction Manual, 4x Extra Blades Quad Battery: 3.7V Lithium Battery Remote Control Battery: 4x 1.5V AAA batteries (not included) Remote Range: About 200 feet Flight Time: 5 1/2 minutes Charging Time: About 90 minutes TIP: Before each charge, wait minutes, until the battery cools to extend battery life. Parts List 01 Upper Body 02 Lower Body 03 Battery Cover 04 1 Set of Blades 05 Forward Motor 06 Reverse Motor 07 Lithium Battery 08 Circuit Board 09 Blue Light 10 Green Light 11 USB Charger 6

8 PROP 65 WARNING WARNING: This product may contain a chemical known to the State of California to cause cancer, or birth defects, or other reproductive harm. AWW INDUSTRIES is an innovative division of DGL Group, Ltd. Other trademarks and trade names are those of their respective owners. AWW INDUSTRIES, 195 Raritan Center Parkway, Edison, NJ Specifications, colors and contents may vary from illustrations. Conforms to safety requirements of ASTM, FCC, & CPSIA. BATTERY WARNING: Do no mix alkaline, standard (carbon zinc), rechargeable (nickel hydride) batteries. Do not mix old and new batteries. Non-rechargeable batteries should not be recharged. Rechargeable batteries should be removed from the appliance before being charged. Rechargeable batteries should be charged under adult supervision only. Exhausted batteries should be removed. The supply terminals should not be short-circuited. Only batteries of the same or equivalent type are recommended to be used. Batteries should be inserted with the correct polarity. WARNING: CHOKING HAZARD-Small parts. Not for children under 3 years. Tested to comply with FCC standards. FOR HOME OR OFFICE USE. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. Manufactured in China. Batch Ref: XXXX Model Number: XXXX

Micro Remote Control UFO Quadcopter KARCTUFOMNA Quick Start Guide Please read this guide carefully before use.

Micro Remote Control UFO Quadcopter KARCTUFOMNA Quick Start Guide Please read this guide carefully before use. Product Layout Battery Installation To load the batteries: Open the battery cover on the back