Impact Wrenches 1/4" and 3/8"

Transcription

1 Impact Wrenches /" and /8" Impact Socket Set /8 Set of 8 pieces impact resistant sockets in tool box, includes the sizes: 0 / / / / / 6 / 7 / 9 mm / square 5 Nm max. Very short and handy / impact wrench, easy to shift F/R with one hand. Regulation of the impacting power in both directions possible. 50 Nm max. /8 impact wrench for small bolts. Regulation of the impacting power in both directions possible. impact wrench /" impact wrench /8" Nm max. 70 Nm max. Jumbo 90 Nm max. only. kg /8 Impact Wrench for confined areas (motorcycles). Butterfly valve for F/R shifting with one hand. Integrated power regulation valve with 8 positions and 60 swivelling air inlet. impact wrench /8" 95 Nm max Smart /8" with extra short and compact design with Exhaust hose / air supply hose. Ideal for confined areas (e.g. small power motor) impact wrench /8" Very handy /8 impact wrench with high quality housing. position torque reducer in forward. 60Xi with Xtremely fast Smart mechanism and surprisingly low noise and low air consumption motor. 5RE Smart- 60Xi Pin Clutch / x70x / FT DH / x87x / FT SH / x65x / FT SH RE / x60x 0 00 / FT J Xi / x7x / FT SmartDP / x7x / FT PC max. pressure 6. bar (90 psi) norms applied : noise according to ISO57 (K PA =K WA =,7 db), vibration -axis according to ISO897-, for LwA-values see page 69.

2 /" Impact Wrenches 50 Nm max Smart 90 Nm max. only. kg Mini / Impact Wrench with high power, but low weight and high quality Composite-Housing. With position torque regulator (in forward). 60Xi with Xtremely fast Smart mechanism and Xtra low consumption air motor. Smart- 60Xi Pin Clutch Nm max. Favoured standard tool, easy to switch with one hand. With position torque regulator (in for-ward). with short anvil 05RE with long anvil 08RE Set (short anvil) short and long sockets and other / accessories you will find on page 55 Sets Every here mentioned set includes: impact wrench (with / without RE ) 0 sockets / with sizes: 9/ 0/ / / / 7/ 9/ / / 7 mm extension bar / 75 mm hex. key tool box 600 Nm max. / square 60 Nm max. Torque Wrenches, Certified Complete program with /, /8, /", /", please see page Robust and very compact Universal Tool with forged impact mechanism. With 6 position torque regulator (in forward). with short anvil 50RE with long anvil 55RE set (short anvil) 5RE Strong all-round Tool, easy to switch with one hand. With position torque regulator (in forward). with short anvil 5RE set (short anvil) 6RE set (short anvil) M Mmax LpA 5 05RE. 00x0x /" / FT PC 08RE.5 x0x RE /" x5x / FT PC RE.7 90x85x /" / FT DP 55RE.8 0x85x Xi / x7x / FT SmartDP / x7x / FT PC max. pressure 6. bar (90 psi norms applied : noise according to ISO57 (K PA =K WA =,7 db), vibration -axis according to ISO897-, for LwA-values see page 69.

3 Impact Wrenches /" 50 Nm max. Power reduction In order to prevent over-tightening of threaded connections this reduction serves to pre-tighten nuts and bolts carefully e.g. before using a torque wrench for final torquing. The power reducer and the forward / reverse shift are practically integrated in one knob, sunk into back of tool and made of metal well protected and sturdy against shocks. The F/R shift is large and easy to grab for professional use and is designed to deliver always full power in reverse. /" Composite Impact Wrenchfor universal use. Fast and high torque with forged mechanism Light weight only.0 kg even at this high power level Robust forward-reverse shift/power regulator one knob only and always full power in reverse Air exhaust down motor housing Swivel air inlet With re-greasing plug for the impact mechanism TL Torque Limited 050 Nm max. Smart.9 kg demo video on The specialist: 6TL Torque Limited with limited torque in forward (max. 90 Nm) for safe and fast pre-tightening before using a torque wrench for final and precise torquing (as officially requested for safety). Making tyre changing more efficient and much faster while maintaining maximum safety (900 Nm max. for disassembly). max. 90 Nm in forward max. 900 Nm in reverse 900 Nm 6TL The Xtra Power Pack to break open. Your ultimate /" tool with only,9 kg and smooth 8,0 db(a). with short anvil 6Xi Drive Torque Speed Weight Inner hose Dimension Air Consumption Air Inlet Impact Noise 6Xi / x85x / IG SmartDP /" x86x /"IG DP TL / max x85x / IG TL max. pressure 6. bar (90 psi) norms applied : noise according to ISO57 (K PA =K WA =,7 db), vibration -axis according to ISO897-, for LwA-values see page 69. 6

4 /" Impact Wrenches 700 Nm max. 500 Nm max. Small / Impact Wrench (Variant of 50 with bigger motor) With 6 position torque regulator in forward. Small / Impact Wrench (Variant of 50) With 6 position torque regulator in forward. Impact Socket Set / Set of 8 pieces impact resistant sockets in tool box, includes the sizes: 6 / 7 / 9 / 0 / / 5 / 6 / 8 mm RE Nm max..8 kg 800 Nm max. Compressed air hoses Only hoses with sufficiently large internal diameter provide enough compressed air for the pneumatic tool at the end of the line. Please see page 66 Well balanced lightweight Premium-s with extra small front part allowing access to confined areas. Easy to control trigger for tightening with care. Double directional reduction of the impacting power possible by position regulator. 700 Nm max Very durable tools with powerful forged impact. Equipped with ergonomic down-handle exhaust and a regulator for reduction of the impacting performance in forward operation (6 positions). Fast maintenance grease plug for servicing the impact from outside. with short anvil with long anvil Nm max. Smart Extremely powerful whilst lightweight and ideally suited to provide a fast service for small trucks and vans. With ergonomic down-handle exhaust that is also available with a silencing exhaust hose. Including a fast maintenance grease plug for regreasing of the impact from outside. The tool has an integrated forward/reverse shift/regulator on the back with power positions. with short anvil 6Xi Drive Torque Speed Weight Inner hose Dimension Air consumption Air inlet Impact Noise 7 05RE /" x95x / FT DP /" x0x /8 FT DP RE /" x0x /" FT PC /" x0x /8" FT PC x0x05 /" x0x /8" FT DP Xi /" x5x /8" FT SmartDP max. pressure 6. bar (90 psi) norms applied : noise according to ISO57 (K PA =K WA =,7 db), vibration -axis according to ISO897-, for LwA-values see page 69.

5 " Impact Wrenches Nm max. Smart 800 Nm max. 50 Nm max. Fast and very light impact wrench like model 6Xi. 0Xi Compact inch tool with extremely short design. Full power in reverse. In forward the impacting power can be reduced in 6 positions Group of tools with good price-power-ratio. Often favoured due to their well balanced construction and good performance. In-handle exhaust and power reducer with positions for each forward and reverse. Variant Article no with short anvil with long anvil Nm max. 9. kg 50 Nm max. 9. kg / 0. kg Truck Tool with forged Impact System. Ergonomic weight allocation and steel front housing with grease nipple. The side handle can swivel by 60 to be set at any position. Air exhaust down the handle. Torque power adjustable in both directions with positions. Famous basic tyre service tools for trucks and buses. Light weight and compact with forged Impact System. Steel front housing with grease nipple. The side handle can swivel by 60 to be set at any position. Forward / reverse shift with integrated position power adjustment in forward. with short anvil with short anvil with long anvil Xi " x5x /8" IG SmartDP x70x " /" IG SH x70x " x70x /" IG DP " x0x /8" IG DP x70x " /" IG DP x70x0 00. max. pressure 6. bar (90 psi) norms applied : noise according to ISO57 (K PA =K WA =,7 db), vibration -axis according to ISO897-, for LwA-values see page 69. 8

6 " Impact Wrenches 600 Nm max. Closed Hammer System 600 Nm max. Closed Hammer System Extremely robust Premium Tools especially recommended for trucks and buses. With almost maintenance-free "Closed Hammer System". The torque power can be adjusted in positions in forward as well as in reverse. with short anvil with long anvil Premium Heavy Duty Tools for use at forwarding companies and for servicing fleets of trucks and buses. Extremely robust due to almost maintenance-free "Closed Hammer System". The impacting power can be adjusted in positions in forward as well as in reverse mode. with short anvil with long anvil mm Universal power pack for truck and bus applications the lightweight front part and the motor housing reduce the total weight to incredible 6.9 kg especially well suited for confined areas and over-head use. Smart mechanism building-up torque fast and efficiently due to internal ball bearing. The rubber coated auxiliary handle is designed for super grip and can be shifted in positions by tightening only one screw. Exhaust down the handle and ready-equipped to attach a silencing exhaust hose (DUS6). 500 Nm 6.9 kg with short anvil Xi Smart One of the strongest " impact wrench in his lightweight class. The tool for the professional tyre service on trucks and buses. Easy to shift with one hand (F/R) and with integrated position power adjustment for tightening (forward). In reverse it delivers automatically full power. Optimum time saver with low air consumption. 800 Nm max. 7. / 8. kg Smart with short anvil 8Xi with long anvil 8Xi All " impact wrenches on this page are equipped with a socket retainer for short term fixation of the accessory - practical for all applications where sockets are often changed. 9 Xi ' ,9/7,* 5x 60x /'' FT Smart DP x79x " /" FT CH 9.5 x79x x80x 0.7 " /" FT CH x80x 0. 8Xi 7. 70x78x " /" FT Smart DP 8Xi 8. 50x78x max. pressure 6. bar (90 psi) * : with side handle FT : female thread norms applied : noise according to ISO57 (K PA =K WA =,7 db), vibration -axis according to ISO897-, for LwA-values see page 69.

7 " and /" Impact Wrenches Sockets Short and long, sets and single impact sockets see page 55 Big " impact wrenches for heavy duty trucks and construction machines. Available with long or short anvil. The impacting power can be reduced in both directions in steps. up to 500 Nm max. Socket Safety Retainer Sockets and other accessory which - is not often changed - is used overhead - may not drop (e.g. from scaffolding), will be protected with this retainer against slipping-off accidentally. See page 55 LIFTMASTER - 90 For moving and positioning with ease - simple to use Nm max. with short anvil with 00 mm long anvil Nm max. with short anvil with 00 mm long anvil Extremely strong and durable pistol tool with "Closed Hammer System" for reduced maintenance. postion torque regulation for both directions Nm max. Closed Hammer System suited for models: 07 / 08 / 5 / 6 5 / 6 / 5 / 6 9 / 9 * / 69 / 79 / 85 / 86 * * can be mounted after small modifications / up to 000 Nm max. Very strong tool for industrial and power plants as well as for threaded connections on track vehicles. Power regulation possible for both directions in steps. 500 Nm max Nm max / 5500 Nm max. Bull Power Tool for extremely high torques in industrial plants like chemical and petrochemical plants as well as power plants. The impacting power can be adjusted in steps for both directions [inch] [Nm] [min-] [kg] [mm] [mm] [l/min] [inch] [db(a)] [m/s²] " x00x 00 0 /8" IG CH x0x " /" IG DP x0x x0x " /" IG DP x0x /" x5x /" FT DP /" x0x 0 90 /" FT DP * /" x90x /" FT PC max. pressure 6. bar (90 psi) * please ask for stock / delivery time FT : female thread norms applied : noise according to ISO57 (K PA =K WA =,7 db), vibration -axis according to ISO897-, for LwA-values see page 69. 0