Axial Flux. Seven-Phase Machine

Size: px
Start display at page:

Download "Axial Flux. Seven-Phase Machine"

Transcription

1 Soft Magnetic Composite Axial Flux Seven-Phase Machine F. Locment, E. S and F. Piriou Laboratory of Power Electronic of Lille 1/21 ENSAM & University of Lille, France

2 Soft Magnetic Composite Axial Flux Seven-Phase Machine Outline I> Introduction II> Machine: 3d-modelling and experimental results 6 EXPERIMENTAL 3D-FEM Cogging torque (Nm) Position ( ) III> Drive : experimental torque DC 0 drive motor Torque Repartition Tref im1qref of reference 0 torques im2qref 0 im3qref 2/21 R(θ) R(9θ) cospθ sin pθ R(θ) = sin pθ cospθ R(3θ) +- M3α M3β M2α M2β vm2βref R-1(θ) im2d im2q im3q vbref vcref [C7 ] vdref PWM 7-Phase veref VSI AFPM vfref vgref vm3βref im1α M1α M1β im1β M3α M3β M2α M2β im2α R-1(9θ) [C7 ] 1 im2β im3α R-1(3θ) im3β ABCDEFG encoder varef ABCDEFG im3d Optical M1α M1β vm1βref vm3αref im1q AFPM vm1αref vm2αref im1d transducer IV> Conclusion +- θ ia,ib,ic,id,ie,if,ig

3 I. Introduction Why such a seven-phase axial-flux Machine? Axial or radial Flux Machine? Earliest machines are axial-flux machines (Faraday 1831) Reasons for shelving axial-flux machines? Manufacturing difficulties and corresponding high costs : for control of uniform air gap (axial magnetic attraction) for laminated sheets and slot of the stator 3/21 Iron lamination enrolled and compacted as a spiral

4 I. Introduction Why a SMC Axial Flux Seven-Phase Machine? Axial or radial Flux Machine? 1>Earliest machines are axial-flux machines (Faraday 1831) 2>Reasons for shelving axial-flux machines? Manufacturing difficulties and corresponding high costs : for control of uniform air gap (axial magnetic attraction) for laminated sheets and slot of the stator core 4/21 Not easy to cut slots in a stator made with iron lamination enrolled and compacted as a spiral

5 I. Introduction Why a SMC Axial Flux Seven-Phase Machine? Axial or radial Flux Machine? 1>Earliest machines are axial-flux machines (Faraday 1831) 2>Reasons for shelving axial-flux machines? Manufacturing difficulties and corresponding high costs : for control of uniform air gap (axial magnetic attraction) for laminated sheets and teeth of the stator for windings arrangement : asymmetry 5/21 Problem of space with end windings at inner radius

6 I. Introduction Consequences of manufacturing difficulties 1> Use of Soft Magnetic Composite? easy to cut slots 3D magnetic property New process of fabrication 6/21

7 I. Introduction Consequences of manufacturing difficulties 2> Simple arrangements of the winding Consequence for 3-phase axial machine Toroidal winding No distributed winding flux linked by one phase is not sinusoidal Non-sinusoidal Electromotive forces except with special shapes of magnets Concentrated winding 7/21 No performant vector control with weak torque ripples

8 I. Introduction Two interesting points of multiphase machines: 1. performant vector control with weak torque ripple even with non-sinusoidal emf 2. intrinsically fault-tolerant machine (already used in electrical ship, future offshore wind generator?) To sum up For performant vector control (torque quality) Multiphase machines impose less constraints on the designer than three-phase machines 8/21 It is particularly interesting for axial-flux machines.

9 Characteristics of the machine 9/21

10 II. Characteristics of the machine Two rotors, 6 poles, a SMC stator with 42 slots ROTORS STATOR MAGNETS COILS 189mm 287mm 10/21 ATOMET EM1(QMP) NdFeB N48

11 II. Characteristics of the machine 11/21 Φ S S (a) NN type N N Nominal power at 750 rpm (kw) Nominal Torque with 50 C in coil (Nm) Nominal Speed (rpm) S Φ N (b) NS type N S Seven phases with toroidal winding 1 slot/pole/phase No filtering effect 750 Nominal current at 65 Nm (A) 5 4/5 arc pole for the magnet repartition: cancellation of the fifth harmonic of emf shift of one slot (mechanical angle 4.3 ) between the two rotors : reduction of the cogging torque 5 65

12 II. Characteristics of the machine Determination of the characteristics? 1>Classical analytical modelling by determination of average flux magnetic density in airgap for determination : of main geometrical characteristics rms value of main harmonic of emf. 2> 3D-Finite Element Method for determination of more sensitive characteristics: cogging torque ; 12/21 harmonics of flux magnetic density and emf ;

13 II. Characteristics of the machine With a shift of 4.3 between the two rotors 60 airgap magnetic flux density by 3D-FEM (Carmel) Electromotive force for 1rd/s 6 % of error on the first harmonic Electromotive force 13/21

14 II. Characteristics of the machine Cogging Torque 0.25 p.u. 3D-FEM cogging torque Peak value 0.06 in p.u. without and with shift between rotors Comparison of cogging torques with shift between rotors 14/21 (experimental and simulation)

15 Characteristics of the drive 15/21

16 III. Characteristics of the drive 7-leg Voltage Source Inverter Dspace 1005 controller board 7-phase axial-flux Supply electronic charge 16/21 Back-ground with DC motor, seven-phase machine and torque transducer (MAGTROL TM211)

17 III. Characteristics of the drive Multi-machine modelling of a seven-phase machine Well known Generalization Wye-coupled 3-phase machine Wye-coupled 7-phase machine ONE 2-phase machine (d,q) Sinusoidal emf required for 2-phase machine for vector control THREE 2-phase machines mechanically and electrically coupled Sinusoidal emf required for EACH 2-phase machine 17/21

18 III. Characteristics of the drive Fictitious 2-phase machines M1 M2 M3 Families of odd harmonics 1, 13, 15, 27,, 5, 9, 19, 23,, 3, 11, 17, 25,, 1>Only one harmonic/2-phase fictitious machine (as for classical 3-phase machine) Back-emf (%) M1 M3 M Order of harmonics EXPERIMENTAL 3D-FEM Ideal emf with only the 1st, the 3rd and the 5th harmonic 18/21 2>For good ability in open-phase fault operation smallest emf for M2

19 III. Characteristics of the drive Synoptic of the 7-phase vector control T ref Repartition of reference torques 0 i M1qref 0 i M2qref 0 i M3qref i M1d i M1q R(θ) R(9θ) R(3θ) R -1 (θ) v M1αref v M1βref v M2αref v M2βref v M3αref v M3βref i M1α M1 i M1β M1α M1β M2α M2β M3α M3β [ ] C 7 ABCDEFG M1α M1β M2α M2β M3α M3β v Aref v Bref v Cref v Dref v Eref v Fref v Gref PWM VSI 7-Phase AFPM 19/21 [ C 7 ] = cospθ sinpθ R( θ ) = sinpθ cospθ π 2π 4 π 4 π 6 π 6 π cos sin cos sin cos sin π 4π 8 π 8 π 12π 12π cos sin cos sin cos sin π 6 π 12π 12π 18π 18π cos sin cos sin cos sin π 8 π 16 π 16 π 24 π 24 π cos sin cos sin cos sin π 10 π 20π 20 π 30π 30π cos sin cos sin cos sin π 12π 24 π 24 π 36 π 36π cos sin cos sin cos sin i M2d i M2q i M3d i M3q R -1 (9θ) R -1 (3θ) θ i M2α i M2β i M3α M3 i M3β [ C ] 1 7 ABCDEFG i A,i B,i C,i D,i E,i F,i G

20 III. Characteristics of the drive Currents in one phase for two cases Measured mechanical torques Only M1 machine supplied - 65 Nm -70 Nm 20/21 M1 and M3 supplied (1st and 3rd harmonics) Amplitude of 0.04 p.u. for pulsating torque

21 IV. Conclusion If vector control and weak torque ripples are required If axial spatial constraints are imposed Prototype Multiphase axial-flux machines are very interesting because sinusoidal emfs are not necessary. For the quality of torque, the seven-phase drive presents good characteristics in agreement with predeterminations obtained by 3D-FEM Performance of the drive with two open phases? 21/21 Other paper in poster session: «A Vector Controlled Axial-flux Seven-phase Machine in Fault Operation

22 IV. Conclusion If vector control and weak torque ripples are required If axial spatial constraints are imposed Multiphase axial-flux machines are very interesting because sinusoidal emfs are not necessary. For the quality of torque, the seven-phase drive presents good characteristics in agreement with predeterminations obtained by 3D-FEM For the efficiency of the drive and its thermal limits, further investigations on materials and modelling must be achieved to predict the obtained results. 22/21

European Conference on Nanoelectronics and Embedded Systems for Electric Mobility

European Conference on Nanoelectronics and Embedded Systems for Electric Mobility European Conference on Nanoelectronics and Embedded Systems for Electric Mobility emobility emotion 25-26 th September 2013, Toulouse, France 6-phase Fault-Tolerant Permanent Magnet Traction Drive for

More information

CHAPTER 4 HARDWARE DEVELOPMENT OF DUAL ROTOR RADIAL FLUX PERMANENT MAGNET GENERATOR FOR STAND-ALONE WIND ENERGY SYSTEMS

CHAPTER 4 HARDWARE DEVELOPMENT OF DUAL ROTOR RADIAL FLUX PERMANENT MAGNET GENERATOR FOR STAND-ALONE WIND ENERGY SYSTEMS 66 CHAPTER 4 HARDWARE DEVELOPMENT OF DUAL ROTOR RADIAL FLUX PERMANENT MAGNET GENERATOR FOR STAND-ALONE WIND ENERGY SYSTEMS 4.1 INTRODUCTION In this chapter, the prototype hardware development of proposed

More information

DESIGN OF COMPACT PERMANENT-MAGNET SYNCHRONOUS MOTORS WITH CONCENTRATED WINDINGS

DESIGN OF COMPACT PERMANENT-MAGNET SYNCHRONOUS MOTORS WITH CONCENTRATED WINDINGS DESIGN OF COMPACT PERMANENT-MAGNET SYNCHRONOUS MOTORS WITH CONCENTRATED WINDINGS CSABA DEAK, ANDREAS BINDER Key words: Synchronous motor, Permanent magnet, Concentrated winding. The design and comparison

More information

Design of Low Speed Axial Flux Permanent Magnet Generators for Marine Current Application. Sanjida Moury. Supervised by Dr.

Design of Low Speed Axial Flux Permanent Magnet Generators for Marine Current Application. Sanjida Moury. Supervised by Dr. Design of Low Speed Axial Flux Permanent Magnet Generators for Marine Current Application Sanjida Moury Supervised by Dr. Tariq Iqbal Faculty of Engineering and Applied Science Memorial University of Newfoundland

More information

Design and Comparison of Axial-Flux Permanent Magnet Motors for In-Wheel Electric Vehicles by 3D-FEM

Design and Comparison of Axial-Flux Permanent Magnet Motors for In-Wheel Electric Vehicles by 3D-FEM o. E-4-AAA-0000 Design and Comparison of Axial-Flux Permanent Magnet Motors for In-Wheel Electric Vehicles by 3D-FEM S.M. JafariShiadeh, M. Ardebili Department of Computer and Electrical Engineering K..

More information

Joule losses of magnets in permanent magnet synchronous machines - case concentrated winding machine

Joule losses of magnets in permanent magnet synchronous machines - case concentrated winding machine Joule losses of magnets in permanent magnet synchronous machines - case concentrated winding machine Hanne Jussila Lappeenranta University of Technology 1 Joule losses of permanent magnets Eddy current

More information

Axial Flux Permanent Magnet Brushless Machines

Axial Flux Permanent Magnet Brushless Machines Jacek F. Gieras Rong-Jie Wang Maarten J. Kamper Axial Flux Permanent Magnet Brushless Machines Second Edition Springer Contents 1 Introduction 1 1.1 Scope 1 1.2 Features 1 1.3 Development of AFPM Machines

More information

AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES

AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES Jacek F. Gieras, Rong-Jie Wang and Maarten J. Kamper Kluwer Academic Publishers, Boston-Dordrecht-London, 2004 TABLE OF CONTENETS page Preface v 1. Introduction

More information

Optimization Design of an Interior Permanent Magnet Motor for Electro Hydraulic Power Steering

Optimization Design of an Interior Permanent Magnet Motor for Electro Hydraulic Power Steering Indian Journal of Science and Technology, Vol 9(14), DOI: 10.17485/ijst/2016/v9i14/91100, April 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Optimization Design of an Interior Permanent Magnet

More information

CHAPTER 5 ANALYSIS OF COGGING TORQUE

CHAPTER 5 ANALYSIS OF COGGING TORQUE 95 CHAPTER 5 ANALYSIS OF COGGING TORQUE 5.1 INTRODUCTION In modern era of technology, permanent magnet AC and DC motors are widely used in many industrial applications. For such motors, it has been a challenge

More information

CHAPTER 3 DESIGN OF THE LIMITED ANGLE BRUSHLESS TORQUE MOTOR

CHAPTER 3 DESIGN OF THE LIMITED ANGLE BRUSHLESS TORQUE MOTOR 33 CHAPTER 3 DESIGN OF THE LIMITED ANGLE BRUSHLESS TORQUE MOTOR 3.1 INTRODUCTION This chapter presents the design of frameless Limited Angle Brushless Torque motor. The armature is wound with toroidal

More information

CHAPTER 1 INTRODUCTION

CHAPTER 1 INTRODUCTION 1 CHAPTER 1 INTRODUCTION 1.1 ELECTRICAL MOTOR This thesis address the performance analysis of brushless dc (BLDC) motor having new winding method in the stator for reliability requirement of electromechanical

More information

Electrical Engineering Department, Government Engineering College, Bhuj, India. Figure 1 Dual rotor single stator Axial Flux PM motor

Electrical Engineering Department, Government Engineering College, Bhuj, India. Figure 1 Dual rotor single stator Axial Flux PM motor American International Journal of Research in Science, Technology, Engineering & Mathematics Available online at http://www.iasir.net ISSN (Print): 2328-3491, ISSN (Online): 2328-3580, ISSN (CD-ROM): 2328-3629

More information

Design and Analysis of Radial Flux Permanent Magnet Brushless DC Motor for Gearless Elevators

Design and Analysis of Radial Flux Permanent Magnet Brushless DC Motor for Gearless Elevators International Journal of Control Theory and Applications ISSN : 0974-5572 International Science Press Volume 9 Number 43 2016 Design and Analysis of Radial Flux Permanent Magnet Brushless DC Motor for

More information

Prototype of an Axial Flux Permanent Magnet Generator for Wind Energy Systems Applications

Prototype of an Axial Flux Permanent Magnet Generator for Wind Energy Systems Applications Prototype of an Axial Flux Permanent Magnet Generator for Wind Energy Systems Applications A. P. Ferreira 1, A. M. Silva 2, A. F. Costa 2 1 School of Technology and Management, Polytechnic Institute of

More information

Brushless dc motor (BLDC) BLDC motor control & drives

Brushless dc motor (BLDC) BLDC motor control & drives Brushless dc motor (BLDC) BLDC motor control & drives Asst. Prof. Dr. Mongkol Konghirun Department of Electrical Engineering King Mongkut s University of Technology Thonburi Contents Brushless dc (BLDC)

More information

Permanent Magnet Machines for Distributed Generation: A Review

Permanent Magnet Machines for Distributed Generation: A Review Permanent Magnet Machines for Distributed Generation: A Review Paper Number: 07GM0593 Authors: Tze-Fun Chan, EE Department, The Hong Kong Polytechnic University, Hong Kong, China Loi Lei Lai, School of

More information

Aspects of Permanent Magnet Machine Design

Aspects of Permanent Magnet Machine Design Aspects of Permanent Magnet Machine Design Christine Ross February 7, 2011 Grainger Center for Electric Machinery and Electromechanics Outline Permanent Magnet (PM) Machine Fundamentals Motivation and

More information

Quiet-running family of products with the lowest torque pulsation

Quiet-running family of products with the lowest torque pulsation Press release Highly dynamic, 3-phase internal rotor motor for industrial applications Quiet-running family of products with the lowest torque pulsation For industrial systems and devices, compact motors

More information

THE advancement in the manufacturing of permanent magnets

THE advancement in the manufacturing of permanent magnets IEEE TRANSACTIONS ON MAGNETICS, VOL. 43, NO. 8, AUGUST 2007 3435 Design Consideration to Reduce Cogging Torque in Axial Flux Permanent-Magnet Machines Delvis Anibal González, Juan Antonio Tapia, and Alvaro

More information

Converteam: St. Mouty, A. Mirzaïan FEMTO-ST: A. Berthon, D. Depernet, Ch. Espanet, F. Gustin

Converteam: St. Mouty, A. Mirzaïan FEMTO-ST: A. Berthon, D. Depernet, Ch. Espanet, F. Gustin Permanent Magnet Design Solutions for Wind Turbine applications Converteam: St. Mouty, A. Mirzaïan FEMTO-ST: A. Berthon, D. Depernet, Ch. Espanet, F. Gustin Outlines 1. Description of high power electrical

More information

A novel flux-controllable vernier permanent-magnet machine

A novel flux-controllable vernier permanent-magnet machine Title A novel flux-controllable vernier permanent-magnet machine Author(s) Liu, C; Zhong, J; Chau, KT Citation The IEEE International Magnetic Conference (INTERMAG2011), Teipei, Taiwan, 25-29 April 2011.

More information

Design of Brushless Permanent-Magnet Machines. J.R. Hendershot Jr. T.J.E. Miller

Design of Brushless Permanent-Magnet Machines. J.R. Hendershot Jr. T.J.E. Miller Design of Brushless Permanent-Magnet Machines J.R. Hendershot Jr. T.J.E. Miller Contents 1 GENERAL INTRODUCTION l 1.1 Definitions and types of brushless motor 1 1.2 Commutation,. 4 1.3 Operation of 3-phase

More information

Ironless Double Rotor Radial Flux Air-cored PM Machine

Ironless Double Rotor Radial Flux Air-cored PM Machine 1 / 26 Ironless Double Rotor Radial Flux Air-cored PM Machine G.I. Oosthuizen & P.J. Randewijk Stellenbosch University, Faculty of Engineering, Dep. of Electrical & Electronic Engineering, Electrical Machines

More information

A Novel Axial-flux Electric Machine for In-wheel Gearless Drive in Plug-in Hybrid Electric Vehicles

A Novel Axial-flux Electric Machine for In-wheel Gearless Drive in Plug-in Hybrid Electric Vehicles A Novel Axial-flux Electric Machine for In-wheel Gearless Drive in Plug-in Hybrid Electric Vehicles W. N. Fu, and S. L. Ho The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong A novel low-speed

More information

ECEg439:-Electrical Machine II

ECEg439:-Electrical Machine II ECEg439:-Electrical Machine II 2.2 Main Structural Elements of DC Machine Construction of DC Machines A DC machine consists of two main parts 1. Stationary Part (Stator):-It is designed mainly for producing

More information

Effect of Permanent Magnet Rotor Design on PMSM Properties

Effect of Permanent Magnet Rotor Design on PMSM Properties Transactions on Electrical Engineering, Vol. 1 (2012), No. 3 98 Effect of Permanent Magnet Rotor Design on PMSM Properties SEKERÁK Peter, HRABOVCOVÁ Valéria, RAFAJDUS Pavol, KALAMEN Lukáš, ONUFER Matúš

More information

Chapter 1 INTRODUCTION. 1.1 Scope. 1.2 Features

Chapter 1 INTRODUCTION. 1.1 Scope. 1.2 Features Chapter 1 INTRODUCTION 1.1 Scope The term axial flux permanent magnet (AFPM) machine in this book relates only to permanent magnet (PM) machines with disc type rotors. Other AFPM machine topologies, e.g.

More information

Experimental Evaluations of the Dual-Excitation Permanent Magnet Vernier Machine

Experimental Evaluations of the Dual-Excitation Permanent Magnet Vernier Machine Experimental Evaluations of the Dual-Excitation Permanent Magnet Vernier Machine Akio Toba*, Hiroshi Ohsawa*, Yoshihiro Suzuki**, Tukasa Miura**, and Thomas A. Lipo*** Fuji Electric Co. R&D, Ltd. * 1 Fuji-machi,

More information

Electromagnetic and Thermal Modeling of a Permanent Magnet Synchronous Machine with Either a Laminated or SMC Stator

Electromagnetic and Thermal Modeling of a Permanent Magnet Synchronous Machine with Either a Laminated or SMC Stator Electromagnetic and Thermal Modeling of a Permanent Magnet Synchronous Machine with Either a Laminated or SMC Stator David K. Farnia Burgess Norton Mfg. Geneva, IL 60134 dkfarnia@burgessnorton.com Tetsuya

More information

DESIGN OF AXIAL FLUX BRUSHLESS DC MOTOR BASED ON 3D FINITE ELEMENT METHOD FOR UNMANNED ELECTRIC VEHICLE APPLICATIONS

DESIGN OF AXIAL FLUX BRUSHLESS DC MOTOR BASED ON 3D FINITE ELEMENT METHOD FOR UNMANNED ELECTRIC VEHICLE APPLICATIONS DESIGN OF AXIAL FLUX BRUSHLESS DC MOTOR BASED ON 3D FINITE ELEMENT METHOD FOR UNMANNED ELECTRIC VEHICLE APPLICATIONS 1 H. SURYOATMOJO, R. MARDIYANTO, G. B. A. JANARDANA, M. ASHARI Department of Electrical

More information

New Self-Excited Synchronous Machine with Tooth Concentrated Winding

New Self-Excited Synchronous Machine with Tooth Concentrated Winding New Self-Excited Synchronous Machine with Tooth Concentrated Winding Gurakuq Dajaku 1) and Dieter Gerling 2), IEEE 1 FEAAM GmbH, D-85577 Neubiberg, Germany 2 Universitaet der Bundeswehr Muenchen, D-85577

More information

University of L Aquila. Permanent Magnet-assisted Synchronous Reluctance Motors for Electric Vehicle applications

University of L Aquila. Permanent Magnet-assisted Synchronous Reluctance Motors for Electric Vehicle applications University of L Aquila Department of Industrial and Information Engineering and Economics Permanent Magnet-assisted Synchronous Reluctance Motors for Electric Vehicle applications A. Ometto, F. Parasiliti,

More information

Automotive Electric Drives An Overview

Automotive Electric Drives An Overview Automotive Electric Drives An Overview Dr. Dorin ILES R&D Laboratory for Electric Drives ebm-papstst. Georgen Dr. Dorin ILES (iles@ieee.org) FISITA 2008 September 14-19, Munich, Germany Targets Overview

More information

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI -603104 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK VII SEMESTER EE6501-Power system Analysis

More information

Noise and vibration due to rotor eccentricity in a HDD spindle system

Noise and vibration due to rotor eccentricity in a HDD spindle system DOI 10.1007/s00542-014-2139-2 Technical Paper Noise and vibration due to rotor eccentricity in a HDD spindle system Sangjin Sung Gunhee Jang Kyungjin Kang Received: 7 October 2013 / Accepted: 8 March 2014

More information

Page 1. Design meeting 18/03/2008. By Mohamed KOUJILI

Page 1. Design meeting 18/03/2008. By Mohamed KOUJILI Page 1 Design meeting 18/03/2008 By Mohamed KOUJILI I. INTRODUCTION II. III. IV. CONSTRUCTION AND OPERATING PRINCIPLE 1. Stator 2. Rotor 3. Hall sensor 4. Theory of operation TORQUE/SPEED CHARACTERISTICS

More information

Data Sheet PM Generator Kit version K535S-4-11 K535S-4-12 K535S-4-14 K535S-4-17 K535S-4-22

Data Sheet PM Generator Kit version K535S-4-11 K535S-4-12 K535S-4-14 K535S-4-17 K535S-4-22 Data Sheet PM Generator Kit version -11-12 -14-17 -22 HIGH THERMAL CLASS HIGH EFFICIENCY RELIABILITY DESIGNED AND MANUFACTURED IN FRANCE OPTIMISED INTEGRATION HIGH QUALITY SAMARIUM COBALT MAGNETS This

More information

An investigation on development of Precision actuator for small robot

An investigation on development of Precision actuator for small robot An investigation on development of Precision actuator for small robot Joo Han Kim*, Se Hyun Rhyu, In Soung Jung, Jung Moo Seo Korea Electronics Technology Institute (KETI) * 203-103 B/D 192 Yakdae-Dong,

More information

Prototyping of Axial Flux Permanent Magnet Motors

Prototyping of Axial Flux Permanent Magnet Motors Prototyping of Axial Flux Permanent Magnet Motors Ferhat Daldaban and Emrah Çetin Faculty of Engineering Department of Electrical and Electronics Engineering Erciyes University, Turkey Contents; //CV //Axial

More information

Axial-flux PM Synchronous Machines with Air-gap Profiling and Very High Ratio of Spoke Rotor Poles to Stator Concentrated Coils

Axial-flux PM Synchronous Machines with Air-gap Profiling and Very High Ratio of Spoke Rotor Poles to Stator Concentrated Coils Axial-flux PM Synchronous Machines with Air-gap Profiling and Very High Ratio of Spoke Rotor Poles to Stator Concentrated Coils Vandana Rallabandi, Narges Taran and Dan M. Ionel, Fellow, IEEE Department

More information

Design Analysis of a Novel Double-Sided Axial- Flux Permanent-Magnet Generator for Micro-Wind Power Applications

Design Analysis of a Novel Double-Sided Axial- Flux Permanent-Magnet Generator for Micro-Wind Power Applications Design Analysis of a Novel Double-Sided Axial- Flux Permanent-Magnet Generator for Micro-Wind Power Applications Mihai CHIRCA, Stefan BREBAN, Claudiu OPREA, Mircea M. RADULESCU Technical University of

More information

Characteristics Analysis of Novel Outer Rotor Fan-type PMSM for Increasing Power Density

Characteristics Analysis of Novel Outer Rotor Fan-type PMSM for Increasing Power Density Journal of Magnetics 23(2), 247-252 (2018) ISSN (Print) 1226-1750 ISSN (Online) 2233-6656 https://doi.org/10.4283/jmag.2018.23.2.247 Characteristics Analysis of Novel Outer Rotor Fan-type PMSM for Increasing

More information

Transient Analysis of Offset Stator Double Sided Short Rotor Linear Induction Motor Accelerator

Transient Analysis of Offset Stator Double Sided Short Rotor Linear Induction Motor Accelerator Transient Analysis of Offset Stator Double Sided Short Rotor Linear Induction Motor Accelerator No. Fred Eastham Department of Electronic and Electrical Engineering, the University of Bath, Bath, BA2 7AY,

More information

14 Single- Phase A.C. Motors I

14 Single- Phase A.C. Motors I Lectures 14-15, Page 1 14 Single- Phase A.C. Motors I There exists a very large market for single-phase, fractional horsepower motors (up to about 1 kw) particularly for domestic use. Like many large volume

More information

INFLUENCE OF MAGNET POLE ARC VARIATION ON THE COGGING TORQUE OF RADIAL FLUX PERMANENT MAGNET BRUSHLESS DC (PMBLDC) MOTOR

INFLUENCE OF MAGNET POLE ARC VARIATION ON THE COGGING TORQUE OF RADIAL FLUX PERMANENT MAGNET BRUSHLESS DC (PMBLDC) MOTOR INFLUENCE OF MAGNET POLE ARC VARIATION ON THE COGGING TORQUE OF RADIAL FLUX PERMANENT MAGNET BRUSHLESS DC (PMBLDC) MOTOR Amit N.Patel 1, Aksh P. Naik 2 1,2 Department of Electrical Engineering, Institute

More information

Electrical Machines II. Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit

Electrical Machines II. Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit Electrical Machines II Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit Asynchronous (Induction) Motor: industrial construction Two types of induction

More information

PM Assisted, Brushless Wound Rotor Synchronous Machine

PM Assisted, Brushless Wound Rotor Synchronous Machine Journal of Magnetics 21(3), 399-404 (2016) ISSN (Print) 1226-1750 ISSN (Online) 2233-6656 http://dx.doi.org/10.4283/jmag.2016.21.3.399 PM Assisted, Brushless Wound Rotor Synchronous Machine Qasim Ali 1,

More information

Permanent Magnet Synchronous Frameless Torque Motors KSO/H Series

Permanent Magnet Synchronous Frameless Torque Motors KSO/H Series Permanent Magnet Synchronous Frameless Torque Motors KSO/H Series Icpe 313 Splaiul Unirii 030138, Bucureşti, România tel./ fax +40213467233 email servo@icpe.ro web http://www.icpe.ro/ Model Number KSO/H

More information

An Investigation of Advanced Magnetic Materials for Axial Field Brushless Permanent Magnet Motor Drives for Automotive Applications

An Investigation of Advanced Magnetic Materials for Axial Field Brushless Permanent Magnet Motor Drives for Automotive Applications The following paper posted here is not the official IEEE published version. The final published version of this paper can be found in the Proceedings of the IEEE Power Electronics Specialist Conference

More information

EVS25. Shenzhen, China, Nov 5-9, 2010

EVS25. Shenzhen, China, Nov 5-9, 2010 Page00053 EVS5 Shenzhen, China, Nov 5-9, 010 Application for Step-sewing of Rotor of IPM Motors Used in EV Hongliang Ying 1, Zhouyun Zhang 1, Jun Gong 1, Surong Huang, Xuanming Ding 1 1 Technique center

More information

DERATING OF THREE-PHASE SQUIRREL-CAGE INDUCTION MOTOR UNDER BROKEN BARS FAULT UDC : Jawad Faiz, Amir Masoud Takbash

DERATING OF THREE-PHASE SQUIRREL-CAGE INDUCTION MOTOR UNDER BROKEN BARS FAULT UDC : Jawad Faiz, Amir Masoud Takbash FACTA UNIVERSITATIS Series: Automatic Control and Robotics Vol. 12, N o 3, 2013, pp. 147-156 DERATING OF THREE-PHASE SQUIRREL-CAGE INDUCTION MOTOR UNDER BROKEN BARS FAULT UDC 621.313.33:621.316.1.017 Jawad

More information

Magnet Skew in Cogging Torque Minimization of Axial Gap Permanent Magnet Motors

Magnet Skew in Cogging Torque Minimization of Axial Gap Permanent Magnet Motors Proceedings of the International Conference on Electrical Machines Paper ID 11 Magnet Skew in Cogging Torque Minimization of Axial Gap Permanent Magnet Motors M. Aydin maydin@ieee.org Dept. of Mechatronics

More information

Cogging Reduction of a Low-speed Direct-drive Axial-gap Generator

Cogging Reduction of a Low-speed Direct-drive Axial-gap Generator APSAEM14 Jorunal of the Japan Society of Applied Electromagnetics and Mechanics Vol.23, No.3 (2015) Regular Paper Cogging Reduction of a Low-speed Direct-drive Axial-gap Generator Tomoki HASHIMOTO *1,

More information

LIMITED ANGLE TORQUE MOTORS

LIMITED ANGLE TORQUE MOTORS LIMITED ANGLE TORQUE MOTORS Limited Angle Torque Motors H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion (

More information

Question Number: 1. (a)

Question Number: 1. (a) Session: Summer 2008 Page: 1of 8 Question Number: 1 (a) A single winding machine cannot generate starting torque. During starting the switch connects the starting winding via the capacitor. The capacitor

More information

MODULAR ELECTRICAL MACHINES A SURVEY

MODULAR ELECTRICAL MACHINES A SURVEY MODULAR ELECTRICAL MACHINES A SURVEY BENŢIA Ioana, RUBA Mircea, SZABÓ Loránd Department of Electrical Machines, Technical University of Cluj-Napoca 400020 Cluj, Daicoviciu nr. 15, Romania; e-mail: ioana.bentia@yahoo.com

More information

Comparison and analysis of flux-switching permanent-magnet double-rotor machine with 4QT used for HEV

Comparison and analysis of flux-switching permanent-magnet double-rotor machine with 4QT used for HEV Title Comparison and analysis of flux-switching permanent-magnet double-rotor machine with 4QT used for HEV Author(s) Mo, L; Quan, L; Zhu, X; Chen, Y; Qiu, H; Chau, KT Citation The 2014 IEEE International

More information

EVS28 KINTEX, Korea, May 3-6, 2015

EVS28 KINTEX, Korea, May 3-6, 2015 EVS28 KINTEX, Korea, May 3-6, 2015 Development and performance investigation of 60kW induction motor with copper diecasting rotor for electric vehicle propulsion applications Yondo Chun, Pilwan Han, Jaehak

More information

High Performance Machine Design Considerations

High Performance Machine Design Considerations High Performance Machine Design Considerations High Performance Machine Design Considerations Abstract From Formula One race cars to consumer vehicles, the demand for high performing, energy efficient

More information

Design of Inverter Driven Induction Machines. Daniel M. Saban, PE PhD

Design of Inverter Driven Induction Machines. Daniel M. Saban, PE PhD Design of Inverter Driven Induction Machines Daniel M. Saban, PE PhD saban@ieee.org Overview The induction machine problem Stakeholders & design drivers Analysis & synthesis challenges Design rules-of-thumb

More information

Chapter 2 PRINCIPLES OF AFPM MACHINES. 2.1 Magnetic circuits Single-sided machines Double-sided machines with internal PM disc rotor

Chapter 2 PRINCIPLES OF AFPM MACHINES. 2.1 Magnetic circuits Single-sided machines Double-sided machines with internal PM disc rotor Chapter 2 PRINCIPLES OF AFPM MACHINES In this chapter the basic principles of the AFPM machine are explained in details. Considerable attention is given to the magnetic circuits, windings, torque production,

More information

THE electric motors have never been designed in the

THE electric motors have never been designed in the 1 Design and Implementation of a 20 kw, 12000 RPM Permanent Magnet Synchronous Motor (PMSM) for the IST Formula Student Powertrain João Viseu Sarrico Formula Student is a worldwide competition for engineering

More information

Analysis of Innovative Design Variations for Double-Sided Coreless-Stator Axial-Flux Permanent-Magnet Generators in Micro-Wind Power Applications

Analysis of Innovative Design Variations for Double-Sided Coreless-Stator Axial-Flux Permanent-Magnet Generators in Micro-Wind Power Applications Analysis of Innovative Design Variations for Double-Sided Coreless-Stator Axial-Flux Permanent-Magnet Generators in Micro-Wind Power Applications M. Chirca, S. Breban, C.A. Oprea, M.M. Radulescu Abstract

More information

Design of a Cost-Efficient High-Speed High- Efficiency PM Machine for Compressor Applications

Design of a Cost-Efficient High-Speed High- Efficiency PM Machine for Compressor Applications Design of a Cost-Efficient High-Speed High- Efficiency PM Machine for Compressor Applications A. Gilson, S. Tavernier, M. Gerber and C. Espanet Moving Magnet Technologies Besançon, France adrien.gilson@movingmagnet.com

More information

AFPM MACHINES WITHOUT STATOR CORES

AFPM MACHINES WITHOUT STATOR CORES Chapter 5 AFPM MACHINES WITHOUT STATOR CORES 5.1 Advantages and disadvantages Depending on the application and operating environment, stators of AFPM machines may have ferromagnetic cores or be completely

More information

Torque Analysis of Magnetic Spur Gear with Different Configurations

Torque Analysis of Magnetic Spur Gear with Different Configurations International Journal of Electrical Engineering. ISSN 974-158 Volume 5, Number 7 (1), pp. 843-85 International Research Publication House http://www.irphouse.com Torque Analysis of Magnetic Spur Gear with

More information

DESIGN AND IMPLEMENTATION OF THE DOUBLE-SIDED AXIAL-FLUX PMSG WITH SLOTTED STATOR BY USING SIZING EQUATION AND FEA SOFTWARE

DESIGN AND IMPLEMENTATION OF THE DOUBLE-SIDED AXIAL-FLUX PMSG WITH SLOTTED STATOR BY USING SIZING EQUATION AND FEA SOFTWARE DESIGN AND IMPLEMENTATION OF THE DOUBLE-SIDED AXIAL-FLUX PMSG WITH SLOTTED STATOR BY USING SIZING EQUATION AND FEA SOFTWARE 1 SAINT SAINT SOE, YAN AUNG OO 1, Department of Electrical Power Engineering,

More information

26 poles and 24 slots

26 poles and 24 slots IEEE Intermag 2009, Sacramento, CA May 8, 2009, GG-02 Novel bearingless motor concept with 26 poles and 24 slots. Zürcher, T. Nussbaumer*, W. Gruber**, and J. W. Kolar Power Electronic Systems Laboratory

More information

Design and Analysis of Novel Bearingless Permanent Magnet Synchronous Motor for Flywheel Energy Storage System

Design and Analysis of Novel Bearingless Permanent Magnet Synchronous Motor for Flywheel Energy Storage System Progress In Electromagnetics Research M, Vol. 51, 147 156, 216 Design and Analysis of Novel Bearingless Permanent Magnet Synchronous Motor for Flywheel Energy Storage System Huangqiu Zhu and Ronghua Lu*

More information

Application of Soft Magnetic Composite Material in the Field of Electrical Machines Xiaobei Li 1,2,a, Jing Zhao 1,2,b*, Zhen Chen 1,2, c

Application of Soft Magnetic Composite Material in the Field of Electrical Machines Xiaobei Li 1,2,a, Jing Zhao 1,2,b*, Zhen Chen 1,2, c Applied Mechanics and Materials Online: 2013-08-30 I: 1662-7482, Vols. 380-384, pp 4299-4302 doi:10.4028/www.scientific.net/amm.380-384.4299 2013 Trans Tech Publications, witzerland Application of oft

More information

Sub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES. 2. What are the two type of poles used in salient pole machines?

Sub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES. 2. What are the two type of poles used in salient pole machines? SRI VIDYA COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF EEEE QUESTION BANK Sub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES 1. Name the two types of synchronous machines. 1. Salient

More information

1. This question is about electrical energy and associated phenomena.

1. This question is about electrical energy and associated phenomena. 1. This question is about electrical energy and associated phenomena. Electromagnetism The current in the circuit is switched on. electromagnet State Faraday s law of electromagnetic induction and use

More information

This is a repository copy of Influence of design parameters on cogging torque in permanent magnet machines.

This is a repository copy of Influence of design parameters on cogging torque in permanent magnet machines. This is a repository copy of Influence of design parameters on cogging torque in permanent magnet machines. White Rose Research Online URL for this paper: http://eprints.whiterose.ac.uk/889/ Article: Zhu,

More information

Investigation of Short Permanent Magnet and Stator Flux Bridges Effects on Cogging Torque Mitigation in FSPM Machines

Investigation of Short Permanent Magnet and Stator Flux Bridges Effects on Cogging Torque Mitigation in FSPM Machines Investigation of Short Permanent Magnet and Stator Flux Bridges Effects on Cogging Torque Mitigation in FSPM Machines Chun Gan, Member, IEEE, Jianhua Wu, Mengjie Shen, Qingguo Sun, Yihua Hu, Senior Member,

More information

MQ1 based Redesign of Battery Blower Fan Motor. March, 2018

MQ1 based Redesign of Battery Blower Fan Motor. March, 2018 MQ1 based Redesign of Battery Blower Fan Motor March, 2018 Benchmarking Process A battery cooling blower fan motor is procured from the market. The motor is benchmarked Physical dimension benchmarking

More information

Comparison of different 600 kw designs of a new permanent magnet generator for wind power applications

Comparison of different 600 kw designs of a new permanent magnet generator for wind power applications Comparison of different 600 kw designs of a new permanent magnet generator for wind power applications E. Peeters, Vito, Boeretang 200, 2400 Mol, Belgium, eefje.peeters@vito.be, tel +32 14 33 59 23, fax

More information

A Quantitative Comparative Analysis of a Novel Flux-Modulated Permanent Magnet Motor for Low-Speed Drive

A Quantitative Comparative Analysis of a Novel Flux-Modulated Permanent Magnet Motor for Low-Speed Drive ANSYS 11 中国用户大会优秀论文 A Quantitative Comparative Analysis of a Novel Flux-Modulated Permanent Magnet Motor for Low-Speed Drive W. N. Fu, and S. L. Ho The Hong Kong Polytechnic University, Hung Hom, Kowloon,

More information

Axial Flux Permanent Magnet Brushless Machines

Axial Flux Permanent Magnet Brushless Machines Axial Flux Permanent Magnet Brushless Machines Axial Flux Permanent Magnet Brushless Machines by JACEK F. GIERAS United Technologies Research Center, East Hartford, Connecticut, U.S.A. RONG-JIE WANG University

More information

Comparison of IPM and SPM motors using ferrite magnets for low-voltage traction systems

Comparison of IPM and SPM motors using ferrite magnets for low-voltage traction systems EVS28 KINTEX, Korea, May 3-6, 215 Comparison of IPM and SPM motors using ferrite magnets for low-voltage traction systems Yong-Hoon Kim 1, Suwoong Lee 1, Eui-Chun Lee 1, Bo Ram Cho 1 and Soon-O Kwon 1

More information

Design of Slotted and Slotless AFPM Synchronous Generators and their Performance Comparison Analysis by using FEA Method

Design of Slotted and Slotless AFPM Synchronous Generators and their Performance Comparison Analysis by using FEA Method International Journal of Electrical and Computer Engineering (IJECE) Vol. 5, No. 4, August 2015, pp. 810~820 ISSN: 2088-8708 810 Design of Slotted and Slotless AFM Synchronous Generators and their erformance

More information

COMPARING SLOTTED vs. SLOTLESS BRUSHLESS DC MOTORS

COMPARING SLOTTED vs. SLOTLESS BRUSHLESS DC MOTORS COMPARING SLOTTED vs. SLOTLESS Authored By: Engineering Team Members Pittman Motors Slotless brushless DC motors represent a unique and compelling subset of motors within the larger category of brushless

More information

Losses Calculation of an Aerospace Retraction Wheel Motor with Regarding to Electromagnetic-Field Analysis Investigation

Losses Calculation of an Aerospace Retraction Wheel Motor with Regarding to Electromagnetic-Field Analysis Investigation Journal of Energy and Power Engineering 10 (2016) 183-190 doi: 10.17265/1934-8975/2016.03.006 D DAVID PUBLISHING Losses Calculation of an Aerospace Retraction Wheel Motor with Regarding to Electromagnetic-Field

More information

Development of High-Efficiency Permanent Magnet Synchronous Generator for Motorcycle Application

Development of High-Efficiency Permanent Magnet Synchronous Generator for Motorcycle Application Development of High-Efficiency Permanent Magnet Synchronous Generator for Motorcycle Application Toshihiko Noguchi, Yuki Kurebayashi, Tetsuya Osakabe, and Toshihisa Takagi Shizuoka University and Suzuki

More information

Permanent Magnet Synchronous Motor. High Efficiency Industrial Motors

Permanent Magnet Synchronous Motor. High Efficiency Industrial Motors VoltPro is a new industrial motor range to meet high efficiency needs of industry by higher level of IE4 efficiency class. Main advantage of this product is cost effective solution ensured by using standard

More information

Development and Test of a High Force Tubular Linear Drive Concept with Discrete Wound Coils for Industrial Applications

Development and Test of a High Force Tubular Linear Drive Concept with Discrete Wound Coils for Industrial Applications Development and Test of a High Force Tubular Linear Drive Concept with Discrete Wound Coils for Industrial Applications Ralf Wegener 1 Member IEEE, Sebastian Gruber, 2 Kilian Nötzold, 2 Florian Senicar,

More information

QUESTION BANK SPECIAL ELECTRICAL MACHINES

QUESTION BANK SPECIAL ELECTRICAL MACHINES SEVENTH SEMESTER EEE QUESTION BANK SPECIAL ELECTRICAL MACHINES TWO MARK QUESTIONS 1. What is a synchronous reluctance 2. What are the types of rotor in synchronous reluctance 3. Mention some applications

More information

Novel Dual-Excitation Permanent Magnet Vernier Machine

Novel Dual-Excitation Permanent Magnet Vernier Machine Novel Dual-Excitation Permanent Magnet Vernier Machine Akio Toba Fuji Electric Co. R &D, Ltd. Fuji-machi 1, Hino-city Tokyo 191-8502, JAPAN Thomas A. Lipo University of Wisconsin - Madison 1415 Engineering

More information

INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET)

INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 ISSN 0976-6480 (Print) ISSN

More information

Design of Sensorless Controlled IPMSM with Concentrated Winding for EV Drive at Low speed

Design of Sensorless Controlled IPMSM with Concentrated Winding for EV Drive at Low speed EVS27 Barcelona, Spain, November 17-20, 2013 Design of Sensorless Controlled IPMSM with Concentrated Winding for EV Drive at Low speed Myung-Seop Lim 1, Seung-Hee Chai 1 and Jung-Pyo Hong 1, Senior Member,

More information

Simulation of dynamic torque ripple in an auxiliary power unit for a range extended electric vehicle

Simulation of dynamic torque ripple in an auxiliary power unit for a range extended electric vehicle The Low Cost Auxiliary Power Unit Project (LowCAP) Simulation of dynamic torque ripple in an auxiliary power unit for a range extended electric vehicle Dian Liu, Sam Akehurst, Christian J Brace University

More information

Part- A Objective Questions (10X1=10 Marks)

Part- A Objective Questions (10X1=10 Marks) Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution) CCET 3(2016Regulation) Name of Programme: B.E. (EEE) Course Code&Course Title: 16EET41 & Synchronous & Induction

More information

Permanent Magnet Synchronous Machines with Fractional Slot and Concentrated Winding Configurations

Permanent Magnet Synchronous Machines with Fractional Slot and Concentrated Winding Configurations CRANFIELD UNIVERSITY Defence Academy - College of Management and Technology Department of Engineering and Applied Science, Power and Drive Systems Group PhD Thesis 2011 Weizhong Fei Permanent Magnet Synchronous

More information

COMPARATIVE STUDY ON MAGNETIC CIRCUIT ANALYSIS BETWEEN INDEPENDENT COIL EXCITATION AND CONVENTIONAL THREE PHASE PERMANENT MAGNET MOTOR

COMPARATIVE STUDY ON MAGNETIC CIRCUIT ANALYSIS BETWEEN INDEPENDENT COIL EXCITATION AND CONVENTIONAL THREE PHASE PERMANENT MAGNET MOTOR COMPARATIVE STUDY ON MAGNETIC CIRCUIT ANALYSIS BETWEEN INDEPENDENT COIL EXCITATION AND CONVENTIONAL THREE PHASE PERMANENT MAGNET MOTOR A. Nazifah Abdullah 1, M. Norhisam 2, S. Khodijah 1, N. Amaniza 1,

More information

Induction Motor Control

Induction Motor Control Induction Motor Control A much misunderstood yet vitally important facet of electrical engineering. The Induction Motor A very major consumer of electrical energy in industry today. The major source of

More information

Fig. 1 Cross section of 8P18S IPM motor. Fig. 2 FEA model of the IPM motor. 3. Design Optimization Variables Design optimization is carried out using

Fig. 1 Cross section of 8P18S IPM motor. Fig. 2 FEA model of the IPM motor. 3. Design Optimization Variables Design optimization is carried out using 2011 International Conference on Signal, Image Processing and Applications With workshop of ICEEA 2011 IPCSIT vol.21 (2011) (2011) IACSIT Press, Singapore Effect of Skew and Radii Ratio on Motor Performance

More information

WITH the requirements of reducing emissions and

WITH the requirements of reducing emissions and IEEE TRANSACTIONS ON MAGNETICS, VOL. 51, NO. 3, MARCH 2015 8201805 Investigation and Design of a High-Power Flux-Switching Permanent Magnet Machine for Hybrid Electric Vehicles Wei Hua, Gan Zhang, and

More information

Electrical Machines -II

Electrical Machines -II Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and

More information

Forced vibration frequency response for a permanent magnetic planetary gear

Forced vibration frequency response for a permanent magnetic planetary gear Forced vibration frequency response for a permanent magnetic planetary gear Xuejun Zhu 1, Xiuhong Hao 2, Minggui Qu 3 1 Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System, Yanshan

More information

2 Principles of d.c. machines

2 Principles of d.c. machines 2 Principles of d.c. machines D.C. machines are the electro mechanical energy converters which work from a d.c. source and generate mechanical power or convert mechanical power into a d.c. power. These

More information