WELD THE WORLD Product Range 11_2015 English

Size: px
Start display at page:

Download "WELD THE WORLD Product Range 11_2015 English"

Transcription

1 WELD THE WORLD Product Range 11_2015 English

2 Weco has been producing and selling for 15 years welding machines. All our welding machines are 100 % in Europe (North of Italy) produced. A wide range of welding machines have been by Weco developed MMA - TIG (DC and AC/DC) - MIG/MAG - MIG/MAG PULS. Service and relations from a partnership point of view. Each year we invest over 10% of our turnover in the design and development of technologies that can innovate our products. 11_2015 2

3 Index MMA PAG. Discovery 150TP 8 Multipower Discovery 200S 10 Discovery Cruiser Cruiser TIG DC Discovery 161T 16 Discovery 171T MAX 17 Multipower 204T 18 Discovery 220T 19 Discovery 300T 20 Cruiser 322T 21 Cruiser 402T 22 Cruiser 502T 23 TIG AC/DC Discovery 200AC/DC 26 Discovery 221AC/DC 27 Discovery 300AC/DC 28 Cruiser 322AC/DC 29 Cruiser 402AC/DC 30 Cruiser 502AC/DC 31 MIG-MAG Synergic Pioneer 321MKS 34 Pioneer 401MKS 35 Pioneer 321MSR 36 Pioneer 401MSR 38 MULTIFUNCTION Discovery 161MF (TP) 42 MicroMAG 301 Plus 43 MicroMAG 302MFK 44 Cruiser 402 SYNERGIC 46 Cruiser 502 SYNERGIC 46 Cruiser 402 SYNERGIC TWIN FEEDER 48 Cruiser 502 SYNERGIC TWIN FEEDER 48 Cruiser 402T SYNERGIC 50 Cruiser 502T SYNERGIC 50 Cruiser 402T SYNERGIC TWIN FEEDER 52 Cruiser 502T SYNERGIC TWIN FEEDER 52 Cruiser 402AC/DC SYNERGIC 54 Cruiser 502AC/DC SYNERGIC 54 Cruiser 402AC/DC SYNERGIC TWIN FEEDER 56 Cruiser 502AC/DC SYNERGIC TWIN FEEDER 56 MIG MAG PULSE / DOUBLE PULSE Micropulse 302MFK 60 Pioneer Pulse 321MKS 62 Pioneer Pulse 321MSR 64 Power Pulse Power Pulse Power Pulse 402 TWIN FEEDER 68 Power Pulse 502 TWIN FEEDER 68 Power Pulse 402T 70 Power Pulse 502T 70 Power Pulse 402T TWIN FEEDER 72 Power Pulse 502T TWIN FEEDER 72 Power Pulse 402AC/DC 74 Power Pulse 502AC/DC 74 Power Pulse 402AC/DC TWIN FEEDER 76 Power Pulse 502AC/DC TWIN FEEDER 76 PLASMA CUTTING Discovery 35P 80 ACCESSORIES COOLING UNITS 82 SLIDING KIT / TROLLEY 83 REMOTE CONTROLS 86 KIT DIGIMANAGER / KIT PUSH PULL 87 OVERCUT 88 GAS REGULATORS 89 SUITCASES 90 ELECTRODE HOLDERS - EARTH CABLES 91 TIG TORCHES 92 MIG MAG TORCHES 94 SOFTWARE UPGRADING KIT 96 FEEDING ROLLS 97 11_2015 3

4 Welding process MMA TIG MIG MAG PULSE DOUBLE PULSE ARC AIR PLASMA Power Inverter Inside Lower Energy Demand Technology es. Overall weight reduction for easier transportation and movement. peatable Reworking time and money saving. Real lower overall electric consumption. W.ECO Technology Inside Lower harmonic current emissions emissions. W.ECO PFC POWER FACTOR CORRECTOR: Lower harmonic current emissions Lower input current Total Protection Maximum reliability A built-in Total Protection Device saves the inverter components from overvoltage and makes the unit suitable for use with unstable power supply and motor-generators. Volt Reduction Device Maximum safety Function VRD (Volt Reduction Device) reduces automatically the voltage of the welding machine during the Standby mode in order to allow the processing in those building site where low voltages are demanded for safety HAC Hybrid Arc Control ing in any working conditions. 11_2015 4

5 Special Functions Digital control and excellent welding with cellulosic electrodes is an optimized combination also for piping and Oil & Gas industry applications. input on workpiece. only welding current. increases the welding current as the arc voltage decreases and reduces the welding current if the arc voltage increases. The Q-Spot (Quick Spot) function makes it possible to minimise tacking times for light gauge sheet metal. 11_2015 5

6 Special Functions This makes it possible to create a highly penetrative and precise fusion bath so that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC - TIG welding. This allows to obtain high welding speed and creating the weld puddle rapidly on a cold workpiece. Questa funzionalità permette di ottenere elevate velocità di saldatura e creando più velocemente il bagno di saldatura a pezzo freddo. E inoltre possibile la saldatura di spessori più grossi con amperaggi modesti. 1. Higher execution speed 2. Higher deposition rate 3. Lower heat input and less plastic deformation 4. Better mechanical properties 6. Lower production costs and depreciation 2 - Higher execution speed 3 - Higher arc stability also with longer stick-out Approvals The complete WPQR packet for execution class 1 and 2 up to S355 is available for all MIG/MAG power sources in Weco s range. 11_2015 6

7 MMA 11_2015 7

8 Discovery 150TP : MMA - TIG DC LIFT EN: EN EN x 230Vac Discovery 150TP is an advanced inverter power source characterized by a robust and reliable industrial construction. It is recommended for MMA welding and TIG DC applications providing excellent arc characteristics. Discovery 150TP is ideal for operations on site like basic maintenance and building construction. A built-in Total Protection Device saves the inverter components from overvoltage and makes the unit suitable for use with unstable power supply and motor-generators. Factory optimized Hot Start, Arc Force and Anti Sticking al- Discovery 150TP Lift Start function guarantees arc ignition without damaging the tungsten electrode. Handle and Shoulder Strap for easy carrying Inverter Power Source for low energy demand and best arc performance Microprocessor controls real time welding parameters. Lift TIG DC ignition reduces Tungsten inclusions lower deformations Ideal for outdoor operations Technology Discovery 150TP 1x230Vac ± 50-60Hz 16A MMA TIG - WIG 35% 60% 100% 35% 60% 100% 140A 110A 100A 150A 115A 100A 5A 140A 5A 150A 94V 23S 310 x 120 x 215mm Discovery 150TP Electrode Holder 16mm 2 L= 4m Earth Cable 16mm2 L=3m Torch TIG 17 valve L= 4m Suitcase 01 ABS BLACK KIT MMA Suggested composition: Discovery 150TP + Suitcase 01 + KIT MMA 11_2015 8

9 Multipower 184 POWER FACTOR CORRECTOR 1 x 115Vac / 1 x 230Vac Multipower 184 is an advanced inverter Power Source characterized by robust and reliable industrial construction. It is recommended for MMA MMA/CELL and LIFT TIG DC applications providing excellent arc characteristics. Multipower 184 Total Protection age and makes the unit suitable for use with unstable power supply and motor generators. PFC (Power Factor Corrector) designed for voltage support from 90 Vac up to 270 Vac able to supply all the demanded current according to the needed welding conditions. Through such devices it is possible the using of this machine both with not stabilized motor-generator and with over 100 meters long power supply Lift Start function guarantees arc ignition without damaging the tungsten electrode. VRD (Volt Reduction Device for safety) DYNarc (Dynamic arc for deeper welding penetration) and V.EL (switch off Arc Voltage). the remote control RC 03. : MMA - MMA CELLULOSIC - TIG DC LIFT EN: EN EN Technology Special Function Handle and Shoulder for easy carrying Inverter Power Sorce for low energy demand and best arc performances Microprocessor controls real time welding parameters. Lift TIG DC reduces Tungsten inclusions. Ideal for outdoor operations. Multipower SLIDING KIT Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 valve L= 4m RC03 Remote Control 1 potentiometer Cable RC03 L=5m 6pins Cable RC03 L=10m 6pins Cable RC03 L=15m 6pins Suitcase 03 ABS BLACK Suggested composition: Multipower Electrode Holder 35mm2 L=4m + Earth Cable 35mm2 L=4m + Suitcase 03 Multipower 184 1x230Vac ± 50-60Hz 1x115Vac ± 50-60Hz 16A 32A MMA TIG - WIG MMA TIG - WIG 35% 60% 100% 35% 60% 100% 50% 60% 100% % 180A 130A 120A 180A 130A 120A 115A 110A 105A A 10A 180A 5A 180A 10A 115A 5A 115A 83V - 11V 23S 400 x 160 x 260 mm 11_2015 9

10 Discovery 200S 3 x 400Vac Discovery 200S is a compact and portable 3 Phase inverter power source for MMA and TIG DC welding applications with excellent arc characteristics in both processes. Discovery 200S repair. The inner PFC W.ECO (Power Factor Corrector)es harmonic current emissions according to the CE regulations. TIG DC functions and digital control available is an optimized medium metal structures. - ing. Anti Sticking allows electrode unstick from the base material in case of accidental sticking. Most of market-electrodes up to 5mm diameter can be easily welded. - input and lower deformations. : MMA - TIG DC LIFT EN: EN EN Technology Light weight and reliable Handle and Shoulder Strap for easy carrying Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Microprocessor controls real-time welding parameters Hot Start increases the start-current and gives better arc ignition Arc Force avoids short circuits and lack of fusion during the welding Lift TIG DC ignition reduces Tungsten inclusions Remote Control applicable Discovery 200S 3x400Vac ± 50-60Hz 16A MMA TIG - WIG 40% 60% 100% 40% 60% 100% 200A 170A 130A 200A 170A 130A 5A 200A 5A 200A 61V 23S 400 x 160 x 260mm Discovery 200S Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 valve L= 4m RC03 Remote Control 1 potentiometer Cable RC03 L=5m 6pins Cable RC03 L=10m 6pins Cable RC03 L=15m 6pins Suitcase 03 ABS BLACK Suggested composition: Discovery 200S + Electrode Holder 35mm2 L=4m + Earth Cable 35mm2 L=4m + Suitcase 03 11_

11 Discovery x 400Vac Discovery 250 source for MMA welding and TIG DC applications with excellent arc characteristics. Discovery TIG DC functions and digital control available is an optimized medium metal structures. - ing. Anti Sticking allows electrode unstick from the base material in case of accidental sticking. Most of market-electrodes up to 6mm diameter can be easily welded. - input and lower deformations. : MMA - TIG DC LIFT EN: EN EN Technologie Technology Robust construction for heavy duty use Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Digital display for setting and reading welding parameters Microprocessor controls real-time welding parameters Hot Start increases the start-current and gives better arc ignition Arc Force avoids short circuits and lack of fusion during the welding Lift TIG DC ignition reduces Tungsten inclusions Trolley available Remote Control applicable Discovery 250 3x400Vac ± 50-60Hz 16A MMA TIG - WIG 35% 60% 100% 35% 60% 100% 250A 190A 160A 250A 200A 170A 5A 250A 5A 250A 77V 23S 460 x 230 x 325mm Discovery Trolley Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 valve L= 4m RC03 Remote Control 1 potentiometer Cable RC03 L=5m 6pins Cable RC03 L=10m 6pins Cable RC03 L=15m 6pins Suggested composition: Discovery Electrode Holder 35mm2 L=4m + Earth Cable 35mm2 L=4m 11_

12 Cruiser 402 : MMA - TIG DC LIFT - MMA CELLULOSIC - ARC AIR EN: EN EN Technology 3 x 400Vac Cruiser 402 is an Heavy Duty professional 3 Phase inverter power source for MMA Welding and TIG DC applications with excellent arc characteristics. Electrodes up to 8mm diameter can be easily welded thanks to its 400A- 100% duty factor at 40 C. Cruiser Digital control and excellent welding with cellulosic electrodes is an optimized combination also for piping and Oil & Gas industry applications. Arc Air diameter carbon electrode. Hot Start and Arc Force welding. Anti Sticking allows electrode unstick from the base material in case of accidental sticking. Cruiser 402 can be easily upgraded to Cruiser 402 MIG/MAG - Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Microprocessor controls real-time welding parameters Digital display for setting and reading welding parameters Lift TIG DC Ignition reduces Tungsten inclusions Trolley available Remote Control applicable Special Function Cruiser 402 3x400Vac ± 50-60Hz 32A MMA TIG - WIG 100% 100% 400A 400A 5A - 400A 5A - 400A 9/83V 9/83V x290x510mm 49.5Kg Cruiser Trolley E Trolley Electrode Holder 70mm2 L=4m Earth Cable 70mm2 L=4m Torch TIG 26 valve L= 4m RC03 Remote Control 1 potentiometer Cable RC03 L=5m 6pins Cable RC03 L=10m 6pins Cable RC03 L=15m 6pins Suggested composition: Cruiser Trolley E + Electrode Holder 70mm2 L=4m + Earth Cable 70mm2 L=4m 11_

13 Cruiser 502 : MMA - TIG DC LIFT - MMA CELLULOSIC - ARC AIR EN: EN EN Technology 3 x 400Vac Cruiser 502 is an Heavy Duty professional 3 Phase inverter power source for MMA Welding and TIG DC applications with excellent arc characteristics. Electrodes up to 8mm diameter can be easily welded thanks to its 400A- 100% duty factor at 40 C. Cruiser Digital control and excellent welding with cellulosic electrodes is an optimized combination also for piping and Oil & Gas industry applications. Arc Air diameter carbon electrode. Hot Start and Arc Force welding. Anti Sticking allows electrode unstick from the base material in case of accidental sticking. Cruiser 402 can be easily upgraded to Cruiser 502 MIG/MAG - Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Microprocessor controls real-time welding parameters Digital display for setting and reading welding parameters Lift TIG DC Ignition reduces Tungsten inclusions Trolley available Remote Control applicable Special Function Cruiser 502 3x400Vac ± 50-60Hz 32A MMA TIG - WIG 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 5A - 500A 5A - 500A 8/95V 8/85V x 290 x 510mm 49.5Kg Cruiser Trolley E Trolley Electrode Holder 70mm2 L=4m Earth Cable 70mm2 L=4m Torch TIG 26 valve L= 4m RC03 Remote Control 1 potentiometer Cable RC03 L=5m 6pins Cable RC03 L=10m 6pins Cable RC03 L=15m 6pins Suggested composition: Cruiser Trolley E + Electrode Holder 70mm2 L=4m + Earth Cable 70mm2 L=4m 11_

14 Note... 11_

15 TIG DC 11_

16 Discovery 161T 1 x 230Vac Discovery 161T is an Advanced Inverter Power Source for TIG DC and MMA welding with excellent arc characteristics. Friendly-user digital interface allows precise parameters setting. Weco Special HF control provides100% rapid and precise arc ignition. The welding is here optimal thanks to: TIG PULS SYN (Synergic) The Q-Spot function- sheet deformation. It allows the positioning of the electrode on the exact tacking spot. - Sticking facilitate operations with up to 3.25mm diameter electrode. : TIG DC HF - MMA EN: EN EN EN Light weight and reliable construction Handle and Shoulder Strap for easy carrying Microprocessor controls real time welding parameters Full Functions TIG DC setting with Digital Display Slow Pulse TIG DC for welding with TIG rod er deformations Technology Special Function Discovery 161 T 1x230Vac ± 50-60Hz 16A TIG - WIG MMA 25% 60% 100% 30% 60% 100% 160A 120A 100A 150A 115A 100A 5A 160A 5A 150A 54V 23S 360 x 120 x 215mm Discovery 161T OVERCUT BOX (Generator Protection) Electrode Holder 16mm 2 L= 4m Earth Cable 16mm2 L=3m Torch TIG 17 L=4m AIR PT Suitcase 02 ABS BLACK KIT MMA Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Discovery 161T + Suitcase 02 + Earth Cable 16mm2 L=3m + Torch TIG 17 L=4m AIR PT + Gas regulator FLOWMETER 11_

17 Discovery 171T MAX : TIG DC HF - MMA EN: EN EN EN Technology 1 x 230Vac Discovery 171T MAX is an innovative Inverter Power Source for TIG DC and MMA welding with excellent arc characteristics. Discovery 171T MAX Q-Start Tack-welding in any conditions. Heat imput and deformations are no longer barriers thanks to Multi-Tack system. It minimizes heat impact on welding material and guarantees high Synergic Pulse TIG DC SYN current. Weco Special HF control provides100% rapid and precise arc ignition. Friendly-user digital interface allows precise parameters setting. parameters control (Base Current and Duty Cycle) allow operating in slow pulse and fast pulse. Trigger control sets 2T/4T/Bi-Level and Spot Welding. Sticking facilitate operations with up to 3.25mm diameter electrode. Handle and Shoulder Strap for easy carrying Microprocessor controls real time welding parameters Slow Pulse TIG DC for thicker plate and welding with TIG rod lower deformations Remote Control applicable Special Function Discovery 171 T MAX 1x230Vac ± 50-60Hz 16A TIG - WIG MMA 40% - 100% 50% - 100% 170A - 120A 150A - 120A 5A 170A 5A 150A 65V 23S 400 x 160 x 260 mm Discovery 171T MAX OVERCUT BOX (Generator Protection) Trolley Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 L=4m AIR PT Torch TIG 26 L=4m AIR Potentiometer(*) RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Suitcase 03 ABS BLACK Gas regulator MANOMETER Gas regulator FLOWMETER (*) Suggested composition: Discovery 171T MAX + Suitcase 03 + Torch TIG 26 L=4m AIR PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_

18 Multipower 204T POWER FACTOR CORRECTOR 1 x 115Vac / 1 x 230Vac : TIG DC HF - MMA - MMA CELLULOSIC EN: EN EN EN Technology Special Function Multipower 204 T 1x230Vac ± 50-60Hz 1x115Vac ± 50-60Hz 16A 32A TIG - WIG MMA TIG - WIG MMA 30% 60% 100% 35% 60% 100% 100% 50% 60% 100% 200A 140A 130A 180A 130A 120A 115A 115A 110A 105A 5A 200A 10A 180A 5A/10A 115A 83V - 11V 23S 400 x 160 x 260 Multipower 204 T is a high sophisticated single Phase Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld Multipower 204 T is particularly indicated for extremely precise construc- - Multipower 204 T PFC device (Power Factor Corrector) which is dimensioned fur supporting a voltage range from 90 Vac up to 270 Vac, there is besides an intelligent system inside able to apply - used both with not stabilized lines or motor generators and with over 100 meters long supplying cables. Weco Special HF control grants 100% a rapid and highly precise arc ignition. The welding is here optimal thanks to: TIG PULS SYN (Synergic) The Dynamic Arc (DYNarc) function which ensures an enhanced weld- The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function tion. It allows the positioning of the electrode on the exact tacking spot. Multipower 204 T allows setting of different coated electrodes types (CELLULOSIC machine can automatically optimize the processing parameters for each kind of base material. The DYNac function ensures a deeper penetration and more stable arc; - The V.EL function (Switch of arc Voltage MMA) allows to set up a switch from the base material. 50 programs can be loaded and saved in memory foot pedal or remote control unit Multipower 204T Cooling Unit C.U KIT C.U./204T Trolley SLIDING KIT Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 L=4m AIR PT Torch TIG 26 L=4m AIR Potentiometer(*) Torch TIG 26 L=4m AIR Up/Down Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Suitcase 03 ABS BLACK Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Discovery 204T + Suitcase 03 + Torch TIG 26 L=4m AIR PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_

19 Discovery 220T POWER FACTOR CORRECTOR : TIG DC HF - MMA EN: EN EN EN Technology 1 x 230Vac Discovery 220T is a high sophisticated single Phase Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Discovery 220T is particularly indicated for extremely precise The inner PFC W.ECO (Power Factor Corrector) harmonic current emissions according to the CE regulations. In TIG DC it is possible the welding with a duty cycle of 220 A-40% at 16 A. Weco Special HF control grants 100% a rapid and highly precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Special Function Discovery 220 T 1x230Vac ± 50-60Hz 16A 25A TIG - WIG MMA 40% 60% 100% - 60% 100% 220A 180A 160A - 180A 150A 5A 220A 10A 180A 81V 23S 460 x 230 x 325mm Discovery 220T Cooling Unit C.U Trolley P Trolley SLIDING KIT Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 L=4m AIR PT Torch TIG 26 L=4m AIR Potentiometer(*) Torch TIG 26 L=4m AIR Up/Down Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Discovery 220T + C.U Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_

20 Discovery 300T : TIG DC HF - MMA EN: EN EN EN Technology Special Function Discovery 300 T 3x400Vac ± 50-60Hz 20A TIG - WIG MMA 50% 60% 100% 40% 60% 100% 300A 250A 210A 300A 230A 200A 5A 300A 10A 300A 76V 23S 460 x 230 x 325mm Discovery 300T Cooling Unit C.U Trolley P Trolley SLIDING KIT Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 L=4m AIR PT Torch TIG 26 L=4m AIR Potentiometer(*) Torch TIG 26 L=4m AIR Up/Down Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER x 400Vac Discovery 300 T is a high sophisticated Three Phases Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Discovery 300T is particularly indicated for extremely precise In TIG DC it is possible the welding with a duty cycle of 300 A-50% / 40C Weco Special HF control grants 100% a rapid and highly precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Suggested composition: Discovery 300T + C.U.12 + Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_

21 Cruiser 322T 3 x 400Vac Cruiser 322T is a high sophisticated Three Phases Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Cruiser 322T is particularly indicated for extremely precise Weco Special HF control grants 100% a rapid and highly precise arc ignition. : TIG DC HF - MMA EN: EN EN EN Technology The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Special Function Cruiser 322 T 3x400Vac ± 50-60Hz 25A TIG - WIG MMA 45% 60% 100% 50% 60% 100% 320A 280A 240A 300A 270A 240A 5A 320A 10A 300A 7/66V 7/71V x 290 x 450mm Cruiser 322 T Cooling Unit C.U Trolley L Electrode Holder 70mm2 L=4m Earth Cable 70mm2 L=4m Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Cruiser 322T + C.U.09 + Trolley L 11_

22 Cruiser 402T 3 x 400Vac Cruiser 402T is a high sophisticated Three Phases Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Cruiser 402T is particularly indicated for extremely precise Weco Special HF control grants 100% a rapid and highly precise arc ignition. : TIG DC HF - MMA - ARC AIR EN: EN EN EN Technology The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Special Function CRUISER 402 T 3x400Vac ± 50-60Hz 32A TIG - WIG MMA 100% 100% 400A 400A 5A 400A 10A 400A 9/83V 9/83V x 290 x 450mm Cruiser 402 T Cooling Unit C.U Trolley L Electrode Holder 70mm2 L=4m Earth Cable 70mm2 L=4m Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Cruiser 402T + C.U.09 + Trolley L 11_

23 Cruiser 502T 3 x 400Vac Cruiser 502T is a high sophisticated Three Phases Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Cruiser 502T is particularly indicated for extremely precise Weco Special HF control grants 100% a rapid and highly precise arc ignition. : TIG DC HF - MMA - ARC AIR EN: EN EN EN Technology The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Special Function CRUISER 502 T 3x400Vac ± 50-60Hz 32A TIG - WIG MMA 50% 60% 100% 50% 60% 100% 500A 460A 400A 500A 450A 400A 5A 500A 10A 500A 9/83V 9/83V x 290 x 450mm Cruiser 502 T Cooling Unit C.U Trolley L Electrode Holder 70mm2 L=4m Earth Cable 70mm2 L=4m Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Cruiser 502T + C.U.09 + Trolley L 11_

24 Note... 11_

25 TIG AC/DC 11_

26 Discovery 200AC/DC 1 x 230Vac Discovery 200 AC/DC is a complete and reliable Single Phase Inverter Power Source for TIG AC and DC welding. easily welded in TIG DC. age Industry and Shipyards are Discovery 200 AC/DC main applications. Trigger control sets 2T/4T/Bi-Level. able in TIG DC. Weco Special HF control provides100% rapid and precise arc ignition. TIG AC welding is optimized thanks to: Synergic arc ignition Advanced Soft AC-Square Waveform for outstanding weld- noise reduction. Friendly-user digital interface allows precise parameters setting. Up to 3.25mm diameter electrode welding is possible in MMA. : TIG AC/DC HF - MMA EN: EN EN EN Technology Light weight and reliable construction Microprocessor controls real time welding parameters AC Balance for oxide-cleaning and penetration and penetration Remote Controlled and Cooling Unit applicable Discovery 200 AC/DC 1x230Vac ± 50-60Hz 16A TIG - WIG MMA 30% 60% 100% 40% 60% 100% 200A 150A 130A 150A 130A 120A 7A 200A 7A 150A 88V 23S 460 x 230 x 325mm Discovery 200 AC/DC Cooling Unit C.U Trolley P Trolley SLIDING KIT Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 L=4m AIR PT Torch TIG 26 L=4m AIR Potentiometer(*) Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Discovery 200AC/DC + C.U Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_

27 Discovery 221AC/DC POWER FACTOR CORRECTOR 1 x 230Vac Discovery 221 AC/DC is a high sophisticated single Phase Inverter TIG AC/DC portable welding machine. steel and copper. Discovery 221AC/DC welding performance. The inner PFC W.ECO device (Power Factor Corrector) reduces harmonic current emissions according to the CE regulations. Weco Special HF control grants 100% a rapid and highly precise arc ignition. The AC welding is here optimized thanks to: the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it possible to create a highly penetrative and tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC reduce the deformation on the base material. : TIG AC/DC HF - MMA EN: EN EN EN Technology Special Function Discovery 221 AC/DC 1x230Vac ± 50-60Hz 16A 25A TIG - WIG MMA 35% 60% 100% 40% 60% 100% 220A 180A 160A 180A 150A 120A 5A 220A 10A 180A 23S 460 x 230 x 325mm The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced welding at any welding conditions. The Q-Start function at the beginning of the welding process. The Multi-Tack function process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory or remote control unit Discovery 221 AC/DC Cooling Unit C.U Trolley P Trolley SLIDING KIT Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 L=4m AIR PT Torch TIG 26 L=4m AIR Potentiometer(*) Torch TIG 26 L=4m AIR Up/Down Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Discovery 221AC/DC + C.U Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_

28 Discovery 300AC/DC 3 x 400Vac : TIG AC/DC HF - MMA EN: EN EN EN Technology Special Function Discovery 300 AC/DC 3x400Vac ± 50-60Hz 20A TIG - WIG MMA 30% 60% 100% 30% 60% 100% 300A 220A 180A 300A 220A 180A 5A 300A 10A 300A 9/59V 23S 460 x 230 x 325mm Discovery 300 AC/DC is a high sophisticated three Phase Inverter TIG AC/DC portable welding machine. Discovery 300AC/DC is particularly in- Weco Special HF control grants 100% a rapid and highly precise arc ignition. The AC welding is here optimized thanks to: calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it possible to create a high- be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC in order to reduce the deformation on the base material. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced weld- The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function tion. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory or remote control unit Discovery 300 AC/DC Cooling Unit C.U Trolley P Trolley SLIDING KIT Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch TIG 26 L=4m AIR PT Torch TIG 26 L=4m AIR Potentiometer(*) Torch TIG 26 L=4m AIR Up/Down Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Discovery 300AC/DC + C.U Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_

29 Cruiser 322AC/DC : TIG AC/DC HF - MMA EN: EN EN EN Technology Special Function 3 x 400Vac Cruiser 322AC/DC is an advanced technology Three Phase Inverter Power Source for TIG AC and DC welding. easily welded in TIG DC. age industry and shipyards are Cruiser 322AC/DC main applications. Weco Special HF control provides100% rapid and precise arc ignition. The AC welding is here optimized thanks to: the calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC welding is besides useful when welding for The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Cruiser 322 AC/DC 3x400Vac ± 50-60Hz 25A TIG - WIG MMA 45% 60% 100% 50% 60% 100% 320A 280A 240A 300A 270A 240A 5A 320A 10A 300A 7/66V 7/71V x 290 x 450mm Cruiser 322 AC/DC Cooling Unit C.U Trolley L Electrode Holder 70mm2 L=4m Earth Cable 70mm2 L=4m Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Cruiser 322T + C.U.09 + Trolley L 11_

30 Cruiser 402AC/DC : TIG AC/DC HF - MMA - ARC AIR EN: EN EN EN Technology Special Function CRUISER 402 AC/DC 3x400Vac ± 50-60Hz 32A TIG - WIG MMA %40 C 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 370A 340A %RT 100% 100% 400A 400A 5A 400A 10A 400A 9/81V 9/81V x 290 x 450mm 55.5kg Cruiser 402AC/DC Cooling Unit C.U Trolley L Electrode Holder 70mm2 L=4m Earth Cable 70mm2 L=4m Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Cruiser 402AC/DC + C.U.09 + Trolley L 3 x 400Vac Cruiser 402AC/DC is an advanced technology Three Phase Inverter Power Source for TIG AC and DC welding. easily welded in TIG DC. age industry and shipyards are Cruiser 402AC/DC main applications. Weco Special HF control provides100% rapid and precise arc ignition. The AC welding is here optimized thanks to: the calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC welding is besides useful when welding for The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory 11_

31 Cruiser 502AC/DC : TIG AC/DC HF - MMA - ARC AIR EN: EN EN EN Technology Special Function CRUISER 502AC/DC 3x400Vac ± 50-60Hz 32A TIG - WIG MMA %40 C 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 370A 340A %RT 50% 60% 100% 50% 60% 100% 500A 470A 400A 500A 460A 400A 5A 500A 5A 500A 9/81V 9/81V x 290 x 450mm 3 x 400Vac Cruiser 502AC/DC is an advanced technology Three Phase Inverter Power Source for TIG AC and DC welding. easily welded in TIG DC. age industry and shipyards are Cruiser 502AC/DC main applications. Weco Special HF control provides100% rapid and precise arc ignition. The AC welding is here optimized thanks to: the calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC welding is besides useful when welding for The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Cruiser 502AC/DC Cooling Unit C.U Trolley L Electrode Holder 70mm2 L=4m Earth Cable 70mm2 L=4m Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer(*) Torch TIG 18 L=4m H2O Up/Down RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m Gas regulator MANOMETER Gas regulator FLOWMETER Suggested composition: Cruiser 502AC/DC + C.U.09 + Trolley L 11_

32 Note... 11_

33 MIG MAG Synergic 11_

34 Pioneer 321MKS For 200mm - 300mm Spools 3 x 400Vac Pioneer 321 MKS is a powerful synergic 3 Phase Inverter for welding. Pioneer 321 MKS easy to move on the working site. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Friendly-user interface allows precise parameters setting using only one knob. 3T Special included for perfect arc ignition and optimum wire cutting at the end of welding. curves and memory locations for customized welding parameters assure complete welding process repeatability. WECO unique HAC (Hybrid Arc Control) supplies a soft and and minimal spattering in any working conditions. : MIG/MAG Synergic Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull Gun applicable for better MIG aluminum welding EN: EN EN EN Technology Pioneer 321 MKS Cooling Unit C.U.07B Torch MIG 36 L= 4m AIR EURO MOTOR DRIVE Torch MIG 240 L= 4m H2O EURO VDC Earth Cable 35mm2 L=4m W RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down d D N 4 D=30mm - d=14mm RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=30 d=14 V Pioneer 321 MKS ROLL 0.8/1.0 D=30 d=14 V x400Vac ± 50-60Hz ROLL 1.0/1.2 D=30 d=14 V A ROLL 0.8/1.0 D=30 d=14 U MIG/MAG ROLL 1.0/1.2 D=30 d=14 U % 60% 100% ROLL 1.0/1.2 D=30 d=14 VK A 280A 230A 30A - 320A Suggested composition AIR: 50V Pioneer 321MKS + Torch MIG 36 L= 4m AIR EURO kVA KW Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 23 Suggested composition H2O: 1110 x 550 x 805mm Pioneer 321MKS + C.U.07B + Torch MIG 240 L= 4m H2O + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_

35 Pioneer 401MKS For 200mm - 300mm Spools 3 x 400Vac Pioneer 401 MKS is a powerful synergic 3 Phase Inverter for welding. Pioneer 401 MKS easy to move on the working site. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Friendly-user interface allows precise parameters setting using only one knob. 3T Special included for perfect arc ignition and optimum wire cutting at the end of welding. curves and memory locations for customized welding parameters assure complete welding process repeatability. WECO unique HAC (Hybrid Arc Control) supplies a soft and and minimal spattering in any working conditions. : MIG/MAG Synergic EN: EN EN EN d D Technology MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Pioneer 401 MKS 3x400Vac ± 50-60Hz 16A MIG/MAG 50% 60% 100% 400A 360A 320A 20A - 400A 53V x 550 x 805mm Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull Gun applicable for better MIG aluminum welding Pioneer 401 MKS Cooling Unit C.U.07B Torch MIG 36 L= 4m AIR EURO Torch MIG MB 501D L= 4m H2O EURO Earth Cable 70mm2 L=4m RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 V ROLL 1.0/1.2 D=37 d=19 V ROLL 1.2/1.6 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 U ROLL 1.2/1.6 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 VK ROLL 1.2/1.6 D=37 d=19 VK Suggested composition AIR: Pioneer 401MKS + Torch MIG 36 L= 4m AIR EURO + Earth Cable 70mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer 401MKS + C.U.07B + Torch MIG MB 501D L= 4m H2O EURO + Earth Cable 70mm2 L=4m + Gas regulator MANOMETER 11_

36 Pioneer 321MSR For 200mm - 300mm Spools 3 x 400Vac Pioneer 321 MSR is a synergic 3 Phase Inverter with separated wire-feeder. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. WF 107 is a portable 4-roll drive wire feeder designed to withstand Friendly-user interface allows precise parameters setting using only one knob. - 3T Special Spot and Intermittent welding mode give excellent welding spots. curves and memory locations for customized welding parameters assure complete welding process repeatability. WECO unique HAC (Hybrid Arc Control) supplies a soft and and minimal spattering in any working conditions. : MIG/MAG Synergic EN: EN EN Technology Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Up to 50m cable bundle can be used with no performances reduction Push-Pull Gun applicable for better MIG aluminum welding All settings can be found on the WF-107 front panel. Solid metallic 4 rolls motor drive-system and optical encoder give the better wire feeding with any type of wire. Pioneer 321 MSR 3x400Vac ± 50-60Hz 16A MIG/MAG 45% 60% 100% 320A 280A 230A 30A - 320A 50V 11.6kVA KW x 550 x 925mm Thanks to the inverter technology and software you can use cable bundles up to 50 meters without affecting the welding performance. ble bundle. 11_

37 Wire Feeder WF107 For 200mm - 300mm Spools EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Pioneer 321 MSR Wire Feeder WF Wheels Kit WF Cooling Unit C.U.07B Interconnection cable 70mmq L=4mt H2O Torch MIG 36 L= 4m AIR EURO Torch MIG 240 L= 4m H2O EURO Earth Cable 35mm2 L=4m RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 V ROLL 1.0/1.2 D=37 d=19 V ROLL 1.2/1.6 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 U ROLL 1.2/1.6 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 VK ROLLO 1.2/1.6 D=37 d=19 VK Suggested composition AIR: Pioneer 321MSR + WF107 + Wheels Kit WF + Interconnection cable L=4mt AIR + Torch MIG 36 L= 4m AIR EURO + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer 321MSR + C.U.07B + WF107 + Wheels Kit WF + Interconnection cable L=4mt H2O + Torch MIG 240 L= 4m H2O + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_

38 Pioneer 401MSR For 200mm - 300mm Spools 3 x 400Vac Pioneer 401 MSR is a synergic 3 Phase Inverter with separated wire-feeder. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. WF 107 is a portable 4-roll drive wire feeder designed to withstand Friendly-user interface allows precise parameters setting using only one knob. - 3T Special Spot and Intermittent welding mode give excellent welding spots. curves and memory locations for customized welding parameters assure complete welding process repeatability. WECO unique HAC (Hybrid Arc Control) supplies a soft and and minimal spattering in any working conditions. : MIG/MAG Synergic EN: EN EN Technology Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Up to 50m cable bundle can be used with no performances reduction Push-Pull Gun applicable for better MIG aluminum welding All settings can be found on the WF-107 front panel. Solid metallic 4 rolls motor drive-system and optical encoder give the better wire feeding with any type of wire. Pioneer 401 MSR 3x400Vac ± 50-60Hz 16A MIG/MAG 50% 60% 100% 400A 360A 320A 20A - 400A 53V x 550 x 925mm Thanks to the inverter technology and software you can use cable bundles up to 50 meters without affecting the welding performance. ble bundle. 11_

39 Wire Feeder WF107 For 200mm - 300mm Spools EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Pioneer 401 MSR Wire Feeder WF Wheels Kit WF Cooling Unit C.U.07B Interconnection cable Interconnection cable 70mmq L=4mt H2O Interconnection cable Torch MIG 36 L= 4m AIR EURO Torch MIG MB 501D L= 4m H2O EURO Earth Cable 70mm2 L=4m RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 V ROLL 1.0/1.2 D=37 d=19 V ROLL 1.2/1.6 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 U ROLL 1.2/1.6 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 VK ROLL 1.2/1.6 D=37 d=19 VK Suggested composition AIR: Pioneer 401MSR + WF107 + Wheels Kit WF + Interconnection cable L=4mt AIR + Torch MIG 36 L= 4m AIR EURO + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer 401MSR + C.U.07B + WF107 + Wheels Kit WF + Interconnection cable L=4mt H2O + Torch MIG 240 L= 4m H2O + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_

40 Note... 11_

41 MULTIFUNCTION 11_

42 DISCOVERY 161MF (TP) For 200mm Spools 1 x 230Vac Discovery 161 MF is a compact and portable Single Phase In- welding. only 17,6kg (including a spool of 5kg 200mm diameter) Discovery 161 MF offers excellent mig-brazing characteristics using CuSi3 and CuSi6. Polarity change allows welding with self shielded wires. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Friendly-user interface allows precise parameters setting using only two knobs. optimizes the arc. Built-in Wind Tunnel protects electronic devices from dust and Discovery 161 MF life cycle. Light weight and reliable Lift TIG DC ignition reduces Tungsten inclusions Optional Spool Gun torch available for MIG aluminum welding : MIG/MAG Manual - TIG DC LIFT - MMA EN: EN EN EN Technology d D MOTOR DRIVE 24VDC 25W N 2 D=40mm - d=22mm Discovery 161 MF 1x230Vac ± 50-60Hz 16A MIG - MAG TIG - WIG MMA 30% 60% 100% 40% 60% 100% 35% 60% 100% 160A 120A 100A 140A 130A 110A 140A 120A 100A 5A - 160A 5A - 140A 5A - 140A 91V 23S 460 x 230 x 325mm Discovery 161MF Discovery 161MF TP (Total Protection) Trolley OVERCUT BOX (Generator Protection) Electrode Holder 16mm 2 L= 4m Earth Cable 16mm2 L=3m Torch MIG 15 L= 3m AIR EURO Torch MIG SPOOL GUN PLUS 15 L=6m EURO Torch TIG 17 L= 4m AIR EURO Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=40 d=22 V ROLL 0.8/1.0 D=40 d=22 V ROLL 1.0/1.2 D=40 d=22 V ROLL 0.8/1.0 D=40 d=22 U ROLL 1.0/1.2 D=40 d=22 U ROLL 1.0/1.2 D=40 d=22 VK Suggested composition Discovery 161MF: Discovery 161MF + Torch MIG 15 L= 3m AIR + Earth Cable 16mm2 L=4m + Gas regulator MANOMETER Suggested composition Discovery 161MF TP: Discovery 161MF TP + Torch MIG 15 L= 3m AIR + Earth Cable 16mm2 L=4m + Gas regulator MANOMETER 11_

43 MicroMAG 301 PLUS For 200mm Spools 3 x 400Vac MicroMAG 301 PLUS only 24kg (including a spool of 5kg 200mm diameter) Polarity change allows welding with self shielded wires. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Friendly-user interface allows precise parameters setting using only two knobs. Soft Arc parameter optimizes the current and the arc based on the welding material. Post Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. optimizes the arc. Built-in Wind Tunnel protects electronic devices from dust and A perfect wire feeding is guaranteed thanks to a 4-rolls motor drive included in MicroMAG 301 PLUS. : MIG/MAG Manual - TIG DC LIFT - MMA Up to 5mm electrodes in MMA Lift TIG ignition to reduce Tungsten inclusions. EN: EN EN EN Technology d D MOTOR DRIVE 24VDC 35W N 4 D=30mm - d=14mm MicroMag 301 PLUS 3x400Vac ± 50-60Hz 16A MIG - MAG TIG - WIG MMA 35% 60% 100% 50% 60% 100% 40% 60% 100% 300A 230A 200A 250A 240A 210A 250A 220A 190A 5A - 300A 5A - 250A 5A - 250A 53V 23S 410 x 270 x 355mm MicroMag 301 PLUS SLIDING KIT 2 MicroMAG SLIDING KIT 3 MicroMAG 301 (DOUBLE) Trolley Trolley H Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch MIG 36 L= 4m AIR EURO Torch TIG 26 L= 4m AIR EURO Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=30 d=14 V ROLL 0.8/1.0 D=30 d=14 V ROLL 1.0/1.2 D=30 d=14 V ROLL 0.8/1.0 D=30 d=14 U ROLL 1.0/1.2 D=30 d=14 U ROLL 1.0/1.2 D=30 d=14 VK Suggested composition: MicroMag 301 PLUS + Torch MIG 36 L= 4m AIR + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_

44 MicroMAG 302 MFK For 200mm - 300mm Spools 3 x 400Vac MicroMAG 302 MFK only 22kg - Polarity change allows welding with self shielded wires. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Post Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. curves and memory locations for customized welding parameters assure complete welding process repeatability. optimizes the arc. A perfect wire feeding is guaranteed thanks to a 4-rolls motor drive included in MicroMAG 302 MFK. : MIG/MAG Synergic - TIG DC LIFT- MMA EN: EN EN EN Technology Up to 5mm electrodes in MMA Lift TIG ignition to reduce Tungsten inclusions. Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull torch applicable for MIG aluminum welding 15kg spool 300mm diameter Remote Controlled by MIG-torch( UP-DOWN) and RC unit d D MOTOR DRIVE 24VDC 35W N 4 D=30mm - d=14mm MicroMag 302 MFK 3x400Vac ± 50-60Hz 16A MIG-MAG TIG - WIG MMA % 40 C 35% 60% 100% 50% 60% 100% 40% 60% 100% 300A 230A 200A 250A 240A 210A 250A 220A 190A % RT - 60% 100% % % - 300A 250A A A 5A - 300A 5A - 250A 5A - 250A 11-60V 23S 560 x 280 x 390mm 11_

45 MicroMAG 302 MFK + C.U.11 MicroMag 302 MFK Cooling Unit C.U Trolley SLIDING KIT 5 MicroMAG Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch MIG 36 L= 4m AIR EURO Torch TIG 26 L= 4m AIR EURO RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=30 d=14 V ROLL 0.8/1.0 D=30 d=14 V ROLL 1.0/1.2 D=30 d=14 V ROLL 0.8/1.0 D=30 d=14 U ROLL 1.0/1.2 D=30 d=14 U ROLL 1.0/1.2 D=30 d=14 VK Suggested composition: MicroMag 302 MFK + Torch MIG 36 L= 4m AIR + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER MicroMAG 302 MFK + C.U.11 + TROLLEY 03 11_

46 Cruiser Synergic Version H2O : MIG/MAG Synergic - TIG DC LIFT - MMA - MMA CELLULOSIC - ARC AIR EN: EN EN Technology 3 x 400Vac Cruiser 402/502 Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40 C) with separated wire feeder for MIG-MAG welding. MMA, MMA cellulosic, Lift TIG DC and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402/502 Synergic power source can be easily moved WF 103 shipyard applications. WF 105 wire feeder is ideal for any kind of tomotive. welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a soft and very stable MIG-MAG arc with excellent weld - Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. Modular concept allows easy welding system upgrade Up to 8mm diameter electrode welding is possible in MMA Arc Air gouging and cutting up to 6mm electrode Lift TIG DC ignition reduces Tungsten inclusions Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull torch applicable for MIG aluminum welding Version AIR Special Function VP01 Cruiser 402 Synergic 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9-83V x 670 x 1530mm Cruiser 502 Synergic 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9-83V x 670 x 1530mm 11_

47 Wire Feeder WF103 - WF105 For 200mm - 300mm Spools WF103 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d WF105 d D D MOTOR DRIVE 42VDC 120W N 4 D=30mm - d=22mm EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Cruiser Cruiser Wire Feeder WF Wire Feeder WF Wheels Kit WF Cooling Unit C.U Interconnection cable Interconnection cable 70mmq L=4mt H2O Interconnection cable Torch MIG MB 501D L= 4m H2O Trolley M Tool BOX VP-01 (AIR VERSION) Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 26 valve L= 4m RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER KIT CRUISER 402 AIR WF103: Cruiser WF103 + Wheels Kit WF + Trolley M + VP-01 + KIT CRUISER 402 AIR WF105: Cruiser WF105 + Wheels Kit WF + Trolley M + VP-01 + KIT CRUISER 402 H2O WF103: Cruiser C.U.09 + WF103 + Wheels Kit WF + Trolley M + Interconnection cable KIT CRUISER 402 H2O WF105: Cruiser C.U.09 + WF105 + Wheels Kit WF + Trolley M + Interconnection cable KIT CRUISER 502 AIR WF103: Cruiser WF103 + Wheels Kit WF + Trolley M + VP-01 + KIT CRUISER 502 AIR WF105: Cruiser WF105 + Wheels Kit WF + Trolley M + VP-01 + KIT CRUISER 502 H2O WF103: Cruiser C.U.09 + WF103 + Wheels Kit WF + Trolley M + Interconnection cable KIT CRUISER 502 H2O WF105: Cruiser C.U.09 + WF105 + Wheels Kit WF + Trolley M + Interconnection cable 11_

48 Cruiser Synergic Twin Feeder Version H2O : MIG/MAG Synergic - TIG DC LIFT - MMA - MMA CELLULOSIC - ARC AIR EN: EN EN x 400Vac Cruiser 402/502 Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40 C) with DOUBLE separated wire feeder and DOUBLE gas bottle holder. The TWIN FEEDER wires and two different gasses with the same power generator. MMA, MMA cellulosic, Lift TIG DC and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402/502 Synergic power source can be easily moved on WF 105 on the wire feeder. curves and memory locations for customized welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Post Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. Modular concept allows easy welding system upgrade Up to 8mm diameter electrode welding is possible in MMA Arc Air gouging and cutting up to 6mm electrode Lift TIG DC ignition reduces Tungsten inclusions Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull torch applicable for MIG aluminum welding Technology Special Function Cruiser 402 Synergic 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9-83V x 670 x 1530mm Cruiser 502 Synergic 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9-83V x 670 x 1530mm 11_

49 Wire Feeder WF105 For 200mm - 300mm Spools WF105 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Cruiser Cruiser WIRE FEEDER Wire Feeder WF COOLING UNIT Cooling Unit C.U TROLLEY Trolley L Kit TWIN FEEDER (Switching PCB included) Tool BOX VP-01 (AIR VERSION) Kit Twin Bottles Interconnection cable Generator - Trolley mod.l Interconnection cable 70mmq L=2mt H2O Interconnection cable Trolley mod.l - WF Interconnection cable 70mmq L=0.65mt H2O Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 26 valve L= 4m Gas regulator MANOMETER Gas regulator FLOWMETER Torch MIG MB 501D L= 4m H2O KIT CRUISER 402 TWIN FEEDER AIR Cruiser (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 502 TWIN FEEDER AIR Cruiser (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 402 TWIN FEEDER H2O Cruiser (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT CRUISER 502 TWIN FEEDER H2O Cruiser (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_

50 Cruiser 402T / 502T Synergic H2O Version : MIG/MAG Synergic - TIG DC HF - MMA - ARC AIR EN: EN EN EN Technology 3 x 400Vac Cruiser 402T/502T Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40 C) with separated wire feeder for MIG-MAG welding. MMA, TIG DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a soft and very stable MIG-MAG arc with excellent weld Weco Special HF control provides100% rapid and precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. Version AIR Special Function VP01 CRUISER 402T SYNERGIC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V x 670 x 1530mm CRUISER 502T SYNERGIC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA kW x 670 x 1530mm 11_

51 Wire Feeder WF103 - WF105 For 200mm - 300mm Spools WF103 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d WF105 d D D MOTOR DRIVE 42VDC 120W N 4 D=30mm - d=22mm EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Cruiser 402T Cruiser 502T Wire Feeder WF Wire Feeder WF Wheels Kit WF Cooling Unit C.U Interconnection cable Interconnection cable 70mmq L=4mt H2O Interconnection cable Torch MIG MB 501D L= 4m H2O Trolley M Tool BOX VP-01 (AIR VERSION) Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 18 L=4m H2O PT RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER KIT Cruiser 402T AIR WF103: Cruiser 402T + WF103 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 402T AIR WF105: Cruiser 402T + WF105 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 402T H2O WF103: Cruiser 402T + C.U.09 + WF103 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 402T H2O WF105: Cruiser 402T + C.U.09 + WF105 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 502T AIR WF103: Cruiser 502T + WF103 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 502T AIR WF105: Cruiser 502T + WF105 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 502T H2O WF103: Cruiser 502T + C.U.09 + WF103 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 502T H2O WF105: Cruiser 502T + C.U.09 + WF105 + Wheels Kit WF + Trolley M Interconnection cable 11_

52 Cruiser 402T - 502T Synergic Twin Feeder Version H2O : MIG/MAG Synergic - TIG DC HF - MMA - ARC AIR EN: EN EN EN Technology Special Function 3 x 400Vac Cruiser 402T/502T Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40 C) with DOUBLE separated wire feeder and DOUBLE gas bottle holder. The TWIN FEEDER wires and two different gasses with the same power generator. MMA, TIG DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402T/502T Synergic power source can be easily moved WF 105 on the wire feeder. curves and memory locations for customized welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Post Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. Weco Special HF control provides100% rapid and precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. CRUISER 402T SYNERGIC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V x 670 x 1530mm CRUISER 502T SYNERGIC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA kW x 670 x 1530mm 11_

53 Wire Feeder WF105 For 200mm - 300mm Spools WF105 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Cruiser 402T Cruiser 502T WIRE FEEDER Wire Feeder WF COOLING UNIT Cooling Unit C.U TROLLEY Trolley L Kit TWIN FEEDER (Switching PCB included) Tool BOX VP-01 (AIR VERSION) Kit Twin Bottles Interconnection cable Generator - Trolley mod.l Interconnection cable 70mmq L=2mt H2O Interconnection cable Trolley mod.l - WF Interconnection cable 70mmq L=0.65mt H2O Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 18 L=4m H2O PT Gas regulator MANOMETER Gas regulator FLOWMETER Torch MIG MB 501D L= 4m H2O KIT CRUISER 402T TWIN FEEDER AIR Cruiser 402T + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 502T TWIN FEEDER AIR Cruiser 502T + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 402T TWIN FEEDER H2O Cruiser 402T + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT CRUISER 502T TWIN FEEDER H2O Cruiser 502T + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_

54 Cruiser 402AC/DC - 502AC/DC Synergic H2O Version : MIG/MAG Synergic - TIG AC/DC HF - MMA - ARC AIR EN: EN EN EN Technology Special Function CRUISER 402AC/DC SYNERGIC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 380A 340A 400A 370A 340A 20A - 400A 5A - 400A 10A - 400A 9/81V 9/81V 9/81V x 670 x 1530mm 3 x 400Vac Cruiser 402AC/DC - 502AC/DC Synergic is a professional synergic 3 Phase Inverter Power Source (340A 100% at 40 C) with separated wire feeder for MIG-MAG welding. MMA, TIG AC/DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402T/502T Synergic power source can be eas- - customized welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a soft and very stable MIG-MAG arc with ex- conditions. Weco Special HF control provides100% rapid and precise arc ignition. The AC welding is here optimized thanks to: the calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC welding is besides useful when welding for The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. CRUISER 502AC/DC SYNERGIC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 30% 60% 100% 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 380A 340A 500A 370A 340A 20A - 500A 5A - 500A 5A - 500A 9/81V 9/81V 9/81V x 670 x 1530mm 11_

55 Wire Feeder WF103 - WF105 For 200mm - 300mm Spools WF103 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d WF105 d D D MOTOR DRIVE 42VDC 120W N 4 D=30mm - d=22mm EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Cruiser 402AC/DC Cruiser 502AC/DC Wire Feeder WF Wire Feeder WF Wheels Kit WF Cooling Unit C.U Interconnection cable Interconnection cable 70mmq L=4mt H2O Interconnection cable Torch MIG MB 501D L= 4m H2O Trolley M Tool BOX VP-01 (AIR VERSION) Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 18 L=4m H2O PT RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER KIT Cruiser 402AC/DC AIR WF103: Cruiser 402AC/DC + WF103 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 402AC/DC AIR WF105: Cruiser 402AC/DC + WF105 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 402AC/DC H2O WF103: Cruiser 402AC/DC + C.U.09 + WF103 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 402AC/DC H2O WF105: Cruiser 402AC/DC + C.U.09 + WF105 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 502AC/DC AIR WF103: Cruiser 502AC/DC + WF103 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 502AC/DC AIR WF105: Cruiser 502AC/DC + WF105 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 502AC/DC H2O WF103: Cruiser 502AC/DC + C.U.09 + WF103 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 502AC/DC H2O WF105: Cruiser 502AC/DC + C.U.09 + WF105 + Wheels Kit WF + Trolley M Interconnection cable 11_

56 Cruiser 402AC/DC - 502AC/DC Synergic Twin Feeder Version H2O : MIG/MAG Synergic - TIG AC/DC HF - MMA - ARC AIR EN: EN EN EN Technology Special Function 3 x 400Vac Cruiser 402T/502T Synergic is a professional synergic 3 Phase Inverter Power Source (340A 100% at 40 C) with DOUBLE separated wire feeder and DOUBLE gas bottle holder. The TWIN FEEDER wires and two different gasses with the same power generator. MMA, TIG AC/DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402T/502T Synergic power source can be easily moved on the wire feeder. curves and memory locations for customized welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Weco Special HF control provides100% rapid and precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. CRUISER 402AC/DC SYNERGIC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 380A 340A 400A 370A 340A 20A - 400A 5A - 400A 10A - 400A 9/81V 9/81V 9/81V x 670 x 1530mm CRUISER 502AC/DC SYNERGIC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 30% 60% 100% 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 380A 340A 500A 370A 340A 20A - 500A 5A - 500A 5A - 500A 9/81V 9/81V 9/81V x 670 x 1530mm 11_

57 Wire Feeder WF105 For 200mm - 300mm Spools WF105 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Cruiser 402AC/DC Cruiser 502AC/DC WIRE FEEDER Wire Feeder WF COOLING UNIT Cooling Unit C.U TROLLEY Trolley L Kit TWIN FEEDER (Switching PCB included) Tool BOX VP-01 (AIR VERSION) Kit Twin Bottles Interconnection cable Generator - Trolley mod.l Interconnection cable 70mmq L=2mt H2O Interconnection cable Trolley mod.l - WF Interconnection cable 70mmq L=0.65mt H2O Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 18 L=4m H2O PT Gas regulator MANOMETER Gas regulator FLOWMETER Torch MIG MB 501D L= 4m H2O KIT CRUISER 402AC/DC TWIN FEEDER AIR Cruiser 402AC/DC + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 502AC/DC TWIN FEEDER AIR Cruiser 502AC/DC + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 402AC/DC TWIN FEEDER H2O Cruiser 402AC/DC + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT CRUISER 502AC/DC TWIN FEEDER H2O Cruiser 502AC/DC + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_

58 Note... 11_

59 11_

60 MicroPulse 302 MFK For 200mm - 300mm Spools 3 x 400Vac MicroMAG 302 MFK designed Inverter for MIG/MAG Synergic, Pulse Synergic and Double Pulse Synergic, MMA and Lift TIG Arc welding. only 24kg - Pulse Synergic and Double Pulse Synergic modes guarantee excellent bead appearance wthout spatters and deformations of MicroMAG 302 MFK - A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) MIG/MAG Pulse/Double Pulse/Synergic - TIG DC LIFT - MMA EN: EN EN EN Technology Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers Remote Controlled by MIG-torch DIGIMANAGER 240 and RC unit Special Function MicroPulse 302 MFK 3x400Vac ± 50-60Hz 16A MIG-MAG TIG - WIG MMA % 40 C 35% 60% 100% 50% 60% 100% 40% 60% 100% 300A 230A 200A 250A 240A 210A 250A 220A 190A % RT - 60% 100% % % - 300A 250A A A 20A - 300A 5A - 250A 5A - 250A 11/60V 23S 560 x 280 x 390mm 11_

61 MOTOR DRIVE 42VDC 45W MicroPulse 302 MFK Cooling Unit C.U Trolley d D n 4 (ø30mm - ø14mm) SLIDING KIT 5 MicroMAG Electrode Holder 35mm2 L=4m Earth Cable 35mm2 L=4m Torch MIG 36 L= 4m AIR EURO Torch MIG 240 L= 4m H2O EURO KIT Digimanager Torch MIG MB 240D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14pins Cable RC08 L=10m 14pins Cable RC08 L=15m 14pins Torch TIG 26 L= 4m AIR EURO RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ MicroPulse 302 MFK + C.U.11 Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=30 d=14 V ROLL 0.8/1.0 D=30 d=14 V ROLL 1.0/1.2 D=30 d=14 V ROLL 0.8/1.0 D=30 d=14 U ROLL 1.0/1.2 D=30 d=14 U ROLL 1.0/1.2 D=30 d=14 VK Suggested composition: MicroPulse 302 MFK + C.U.11 + Torch MIG 240 L= 4m H2O EURO + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER Trolley 03 MicroPulse 302 MFK + C.U.11 + TROLLEY 03 11_

62 Pioneer Pulse 321MKS For 200mm - 300mm Spools Version H2O 3 x 400Vac Pioneer Pulse 321MKS is professional 3 Phase Inverter Power Source (320A 45% at 40 C)MIG-MAG available modes are: Man- Pulse Synergic and Double Pulse Synergic modes guarantee excellent bead appearance wthout spatters and deformations of Pioneer Pulse 321MKS - A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input : MIG/MAG Pulse/Double Pulse/Synergic EN: EN EN EN Technology Special Function Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers Pioneer Pulse 321MKS areas tanks to robust and big wheels. - Cooling Unit available vices from dust and saltiness and improves reliability for optimal penetration at start and crater _lling at bead s end - Memory locations for welding process repeatability - Push-Pull torch applicable for MIG aluminum welding - Remote Controlled by MIG-torch DIGIMANAGER 240 and RC unit - Phases Control Device to supervise the right connection to the electrical NET Pioneer Pulse 321 MKS 3x400Vac ± 50-60Hz 25A MIG/MAG 45% 60% 100% 320A 280A 230A 20A - 320A 71V 14.6kVA KW x 550 x 805mm 11_

63 MOTOR DRIVE 42VDC Pioneer Pulse 321MKS W Cooling Unit C.U.07B Torch MIG 36 L= 4m AIR EURO d D N 4 D=37mm - d=19mm Torch MIG 240 L= 4m AIR EURO KIT Digimanager Torch MIG MB 240D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14pins Cable RC08 L=10m 14pins Cable RC08 L=15m 14pins Earth Cable 70mm2 L=4m RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321 PULSE / WF Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 V ROLL 1.0/1.2 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 VK ROLL D=37 d=19 LISCIO ROLL D=37 d=19 knurled Suggested composition AIR: Pioneer Pulse 321 HSL + Torch MIG 36 L= 4m AIR EURO + Earth Cable 70mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer Pulse 321 HSL + C.U.07B + Torch MIG MB 240D L=4m Digimanager + Earth Cable 70mm2 L=4m + Gas regulator MANOMETER 11_

64 Pioneer Pulse 321MSR For 200mm - 300mm Spools 3 x 400Vac Pioneer Pulse 321MSR is a professional 3 Phase Inverter Power Source with separated wire feeder WF 104. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic EN: EN EN EN Technology Pioneer Pulse 321MSR areas tanks to robust and big wheels. - Cooling Unit available vices from dust and saltiness and improves reliability for optimal penetration at start and crater _lling at bead s end - Memory locations for welding process repeatability - Push-Pull torch applicable for MIG aluminum welding - Remote Controlled by MIG-torch DIGIMANAGER 240 and RC unit - Phases Control Device to supervise the right connection to the electrical NET Special Function Pioneer Pulse 321 MSR 3x400Vac ± 50-60Hz 25A MIG/MAG 45% 60% 100% 320A 280A 230A 20A - 320A 71V 14.6kVA KW x 550 x925mm 11_

65 Wire Feeder WF104 For 200mm - 300mm Spools EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Pioneer Pulse 321MSR Wire Feeder WF Wheels Kit WF Cooling Unit C.U.07B Interconnection cable 70mmq L=4mt H2O Torch MIG 36 L= 4m AIR EURO Torch MIG 240 L= 4m H2O EURO KIT Digimanager Torch MIG MB 240D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14poli Cable RC08 L=10m 14poli Cable RC08 L=15m 14poli Earth Cable 70mm2 L=4m RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321MKS WF105/ Gas regulator MANOMETER Gas regulator FLOWMETER ROLL 0.6/0.8 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 V ROLL 1.0/1.2 D=37 d=19 V ROLL 1.2/1.6 D=37 d=19 V ROLL 0.8/1.0 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 U ROLL 1.2/1.6 D=37 d=19 U ROLL 1.0/1.2 D=37 d=19 VK ROLLO 1.2/1.6 D=37 d=19 VK Suggested composition AIR: Pioneer Pulse 321MSR + WF104 + Wheels Kit WF + Interconnection cable L=4mt AIR + Torch MIG 36 L= 4m AIR EURO + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer Pulse 321MSR + C.U.07B + WF104 + Wheels Kit WF + Interconnection cable L=4mt H2O + Torch MIG 240 L= 4m H2O + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_

66 Power Pulse 402 / 502 Version H2O 3 x 400Vac Power Pulse 402/502 is an Heavy Duty (400A 100% at 40 C) professional 3 Phase Inverter Power Source with separated wire feeder. MMA, MMA cellulosic, Lift TIG DC and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG DC LIFT - MMA - MMA CELL - ARC AIR EN: EN EN Technology - Modular concept allows multi-welding processes - Cooling Unit available vices from dust and saltiness and improves reliability for optimal penetration at start and crater _lling at bead s end - Memory locations for welding process repeatability - Push-Pull torch applicable for MIG aluminum welding - Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit Special Function Power Pulse 402 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V x 670 x 1530mm Power Pulse 502 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA kW x 670 x 1530mm 11_

67 Wire Feeder WF104 For 200mm - 300mm Spools EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Power Pulse Power Pulse Wire Feeder WF Wheels Kit WF Cooling Unit C.U Interconnection cable Interconnection cable 70mmq L=4mt H2O Interconnection cable Torch MIG MB 501D L= 4m H2O KIT Digimanager Torch MIG MB 501D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14poli Cable RC08 L=10m 14poli Cable RC08 L=15m 14poli Trolley M Tool BOX VP-01 (AIR VERSION) Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 26 valve L= 4m RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321 PULSE / WF Gas regulator MANOMETER Gas regulator FLOWMETER KIT Power Pulse 402 HSL AIR Power Pulse WF104 + Kit ruote WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 502 HSL AIR Power Pulse WF104 + Kit ruote WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 402 HSL H2O Power Pulse C.U.09 + WF104 + Kit ruote WF + Trolley M + Interconnection cable KIT Power Pulse 502 HSL H2O Power Pulse C.U.09 + WF104 + Kit ruote WF + Trolley M + Interconnection cable 11_

68 Power Pulse 402/502 Twin Feeder Version H2O 3 x 400Vac Power Pulse 402/502 TWIN FEEDER is an Heavy Duty (400A 100% at 40 C) professional 3 Phase Inverter Power Source with DOUBLE separated wire feeder and DOUBLE gas bottle holder. MMA, MMA cellulosic, Lift TIG DC and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG DC LIFT - MMA - MMA CELL - ARC AIR EN: EN EN Technology - Modular concept allows multi-welding processes - Cooling Unit available vices from dust and saltiness and improves reliability for optimal penetration at start and crater _lling at bead s end - Memory locations for welding process repeatability - Push-Pull torch applicable for MIG aluminum welding - Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit Special Function Power Pulse 402 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V x 670 x 1530mm Power Pulse 502 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA kW x 670 x 1530mm 11_

69 Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Power Pulse Power Pulse WIRE FEEDER Wire Feeder WF COOLING UNIT Cooling Unit C.U TROLLEY Trolley L Kit TWIN FEEDER (Switching PCB included) Tool BOX VP-01 (AIR VERSION) Kit Twin Bottles Interconnection cable Generator - Trolley mod.l Interconnection cable 70mmq L=2mt H2O Interconnection cable Trolley mod.l - WF Interconnection cable 70mmq L=0.65mt H2O Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 26 valve L= 4m Gas regulator MANOMETER Gas regulator FLOWMETER Torch MIG MB 501D L= 4m H2O KIT Digimanager Torch MIG MB 501D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14poli Cable RC08 L=10m 14poli Cable RC08 L=15m 14poli KIT POWER PULSE 402 TWIN FEEDER AIR Power Pulse (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 502 TWIN FEEDER AIR Power Pulse (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 402 TWIN FEEDER H2O Power Pulse (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT POWER PULSE 502 TWIN FEEDER H2O Power Pulse (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_

70 Power Pulse 402T / 502T H2O Version 3 x 400Vac Power Pulse 402T / 502T is an Heavy Duty (400A 100% at 40 C) professional Multifunction 3 Phase Inverter Power Source with separated wire feeder WF 104. MMA, TIG DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG DC HF - MMA - ARC AIR EN: EN EN EN Technology Mig Mag Special Function The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function It allows the positioning of the electrode on the exact tacking spot. Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit Version AIR Tig Special Function VP01 Power Pulse 402T 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V x 670 x 1530mm Power Pulse 502T 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA kW x 670 x 1530mm 11_

71 Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Power Pulse 402T Power Pulse 502T Wire Feeder WF Wheels Kit WF Cooling Unit C.U Interconnection cable Interconnection cable 70mmq L=4mt H2O Interconnection cable Torch MIG MB 501D L= 4m H2O KIT Digimanager Torch MIG MB 501D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14poli Cable RC08 L=10m 14poli Cable RC08 L=15m 14poli Trolley M Tool BOX VP-01 (AIR VERSION) Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 18 L=4m H2O PT RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321 PULSE / WF Gas regulator MANOMETER Gas regulator FLOWMETER KIT Power Pulse 402T AIR Power Pulse 402T + WF104 + Kit ruote WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 502T AIR Power Pulse 502T + WF104 + Kit ruote WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 402T H2O Power Pulse 402T + C.U.09 + WF104 + Kit ruote WF + Trolley M + Interconnection cable KIT Power Pulse 502T H2O Power Pulse 502T + C.U.09 + WF104 + Kit ruote WF + Trolley M + Interconnection cable 11_

72 Power Pulse 402T/502T Twin Feeder Version H2O 3 x 400Vac Power Pulse 402T / 502T TWIN FEEDER is an Heavy Duty (400A 100% at 40 C) professional Multifunction 3 Phase Inverter Power Source with DOUBLE separated wire feeder and DOU- BLE gas bottle holder. MMA, TIG DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input : MIG/MAG Pulse/Double Pulse/Synergic - TIG DC HF - MMA - ARC AIR EN: EN EN EN Technology Mig Mag Special Function Tig Special Function Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit Power Pulse 402T 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V x 670 x 1530mm Power Pulse 502T 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA kW x 670 x 1530mm 11_

73 Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Power Pulse 402T Power Pulse 502T WIRE FEEDER Wire Feeder WF COOLING UNIT Cooling Unit C.U TROLLEY Trolley L Kit TWIN FEEDER (Switching PCB included) Tool BOX VP-01 (AIR VERSION) Kit Twin Bottles Interconnection cable Generator - Trolley mod.l Interconnection cable 70mmq L=2mt H2O Interconnection cable Trolley mod.l - WF Interconnection cable 70mmq L=0.65mt H2O Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 18 L=4m H2O PT Gas regulator MANOMETER Gas regulator FLOWMETER Torch MIG MB 501D L= 4m H2O KIT Digimanager Torch MIG MB 501D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14poli Cable RC08 L=10m 14poli Cable RC08 L=15m 14poli KIT POWER PULSE 402T TWIN FEEDER AIR Power Pulse 402T + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 502T TWIN FEEDER AIR Power Pulse 502T + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 402T TWIN FEEDER H2O Power Pulse 402T + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT POWER PULSE 502T TWIN FEEDER H2O Power Pulse 502T + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_

74 Power Pulse 402AC/DC - 502AC/DC H2O Version 3 x 400Vac Power Pulse 402AC/DC / 502AC/DC is an Heavy Duty professional Multifunction 3 Phase Inverter Power Source with separated wire feeder WF 104. MMA, TIG AC/DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG AC/DC HF - MMA - ARC AIR EN: EN EN EN Technology The AC welding is here optimized thanks to: calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it possible to create a can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC in order to reduce the deformation on the base material. Mig Mag Special Function Tig Special Function The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function It allows the positioning of the electrode on the exact tacking spot. Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit POWER PULSE 402AC/DC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 380A 340A 400A 370A 340A 20A - 400A 5A - 400A 10A - 400A 9/81V 9/81V 9/81V x 670 x 1530mm POWER PULSE 502AC/DC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 30% 60% 100% 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 380A 340A 500A 370A 340A 20A - 500A 5A - 500A 5A - 500A 9/81V 9/81V 9/81V x 670 x 1530mm 11_

75 Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Power Pulse 402AC/DC Power Pulse 502AC/DC Wire Feeder WF Wheels Kit WF Cooling Unit C.U Interconnection cable Interconnection cable 70mmq L=4mt H2O Interconnection cable Torch MIG MB 501D L= 4m H2O KIT Digimanager Torch MIG MB 501D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14poli Cable RC08 L=10m 14poli Cable RC08 L=15m 14poli Trolley M Tool BOX VP-01 (AIR VERSION) Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 18 L=4m H2O PT RC04 Remote Control 2 potentiometers RC05 Remote Control 1 up/down RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins PUSH PULL KIT 321 PULSE / WF Gas regulator MANOMETER Gas regulator FLOWMETER KIT Power Pulse 402AC/DC AIR Power Pulse 402AC/DC + WF104 + Wheels Kit WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 502AC/DC AIR Power Pulse 502AC/DC + WF104 + Wheels Kit WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 402AC/DC H2O Power Pulse 402AC/DC + C.U.09 + WF104 + Wheels Kit WF + Trolley M + Interconnection cable KIT Power Pulse 502AC/DC H2O Power Pulse 502AC/DC + C.U.09 + WF104 + Wheels Kit WF + Trolley M + Interconnection cable 11_

76 Power Pulse 402AC/DC - 502AC/DC Twin Feeder Version H2O 3 x 400Vac Power Pulse 402AC/DC - 502AC/DC TWIN FEEDER is an Heavy Duty professional Multifunction 3 Phase Inverter Power Source with DOUBLE separated wire feeder and DOUBLE gas bottle holder. MMA, TIG AC/DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG AC/DC HF - MMA - ARC AIR EN: EN EN EN Technology Mig Mag Special Function Tig Special Function The AC welding is here optimized thanks to: calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it possible to create a can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC in order to reduce the deformation on the base material. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function It allows the positioning of the electrode on the exact tacking spot. Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit POWER PULSE 402AC/DC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 380A 340A 400A 370A 340A 20A - 400A 5A - 400A 10A - 400A 9/81V 9/81V 9/81V x 670 x 1530mm POWER PULSE 502AC/DC 3x400Vac ± 50-60Hz 32A MIG - MAG TIG - WIG MMA 30% 60% 100% 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 380A 340A 500A 370A 340A 20A - 500A 5A - 500A 5A - 500A 9/81V 9/81V 9/81V x 670 x 1530mm 11_

77 Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN EN Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Power Pulse 402AC/DC Power Pulse 502AC/DC WIRE FEEDER Wire Feeder WF COOLING UNIT Cooling Unit C.U TROLLEY Trolley L Kit TWIN FEEDER (Switching PCB included) Tool BOX VP-01 (AIR VERSION) Kit Twin Bottles Interconnection cable Generator - Trolley mod.l Interconnection cable 70mmq L=2mt H2O Interconnection cable Trolley mod.l - WF Interconnection cable 70mmq L=0.65mt H2O Earth Cable 70mm2 L=4m Electrode Holder 70mm2 L=4m Torch TIG 18 L=4m H2O PT Gas regulator MANOMETER Gas regulator FLOWMETER Torch MIG MB 501D L= 4m H2O KIT Digimanager Torch MIG MB 501D L=4m Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14poli Cable RC08 L=10m 14poli Cable RC08 L=15m 14poli KIT POWER PULSE 402AC/DC TWIN FEEDER AIR Power Pulse 402AC/DC + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 502AC/DC TWIN FEEDER AIR Power Pulse 502AC/DC + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 402AC/DC TWIN FEEDER H2O Power Pulse 402AC/DC + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT POWER PULSE 502AC/DC TWIN FEEDER H2O Power Pulse 502AC/DC + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_

78 Note... 11_

79 Plasma Cutting 11_

80 Discovery 35P 1 x 230Vac Discovery 35P is a portable Single Phase Inverter Power Source for PLASMA cutting. Its reliable industrial construction is suitable Discovery 35P is ideal for cutting steel and non-ferrous material up to 10mm thickness. Friendly-user interface allows precise parameters setting. sparing time and increasing productivity. Start without High Frequency avoids interferences with electronical devices. Grating function permits continuous cutting of grates and expanded metal. Light weight and reliable Handle and Shoulder Strap for easy carrying Inverter Power Source reduces energy demand and gives the best arc performance : PLASMA EN: EN EN Technology DISCOVERY 35P 1x230Vac ± 50-60Hz 25A PLASMA 45% 60% 100% 35A 30A 27A 20A 35A 0V 23S 450 x 160 x 260mm 10.6Kg Discovery 35P OVERCUT BOX (Generator Protection) Earth Cable 16mm2 L=3m Suggested composition: Discovery 35P + OVERCUT + Earth Cable 11_

81 ACCESSORIES COOLING UNITS 76 SLIDING KIT / TROLLEY 77 REMOTE CONTROLS 79 PUSH PULL KIT 80 OVERCUT 81 GAS REGULATOR 81 SUITCASES 82 ELECTRODE HOLDER - EARTH CABLES 83 TIG TORCHES 84 MIG MAG TORCHES 86 SOFTWARE UPGRADING KIT 88 FEEDING ROLLS 89 11_

82 Cooling Unit CU 07B Cooling Unit CU 09 P1 l/min P max Cooling Unit 07B 1x230Vac ± 50-60Hz 23S 280 x 142 x 570mm C.U.07B P1 l/min P max Cooling Unit 09 1x400Vac ± 50-60Hz 23S 720 x 290 x 235mm C.U Cooling Unit CU 12 Cooling Unit CU 11 P1 l/min Pmax l/min P max C.U Cooling Unit 12 1x230Vac ± 50-60Hz 700W 1.1KW x 230 x 210mm P1 l/min Pmax l/min P max C.U Cooling Unit 11 1x400Vac ± 50-60Hz 2.8kW 4.5l x 290 x 240mm 18Kg (22.5Kg) 11_

83 Sliding Kit 2 MACHINE Sliding KIT MicroMAG 301 PLUS Sliding Kit 3 Sliding Kit 5 MACHINE Sliding KIT MicroMAG 301 PLUS Sliding KIT MicroMAG 302 MFK Sliding Kit 6 Sliding Kit 7 MACHINE Sliding KIT Discovery 220T - 300T - 200AC/DC - 221AC/DC - 300AC/DC Sliding KIT Multipower T 11_

84 Trolley 02 Trolley 03 TROLLEY x 420 x 1110mm Trolley TROLLEY x 650 x 1110mm Trolley Trolley E Trolley H TROLLEY E 1120 x 400 x 690 mm Trolley E TROLLEY H 850 x 340 x 570 mm Trolley H _

85 Trolley L Trolley M TROLLEY L 630 x 420 x1110 mm Trolley L 36Kg - VP-01 13Kg Trolley L VP TROLLEY M 630 x 420 x1110 mm Trolley M 36Kg - VP-01 13Kg Trolley M VP Trolley P TROLLEY P 1015 x 500 x 900 mm Trolley P _

86 RC02 Foot pedal TECHNICAL DATA 6-10 PINS 100KOhm RC02 Foot pedal Cable RC02 L=5m Cable RC02 L=10m Cable RC02 L=15m RC03 Single Potentiometer TECHNICAL DATA 14 PINS 100KOhm RC03 Remote Control 1 potentiometer Cable RC03 L=5m 6pins Cable RC03 L=10m 6pins Cable RC03 L=15m 6pins RC04 Double Potentiometer TECHNICAL DATA 14 PINS 2 x 100KOhm RC04 Remote Control 2 potentiometers Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins RC05 Single Up & Down TECHNICAL DATA 14 PINS RC05 Remote Control 1 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins _

87 RC06 Double Up & Down TECHNICAL DATA 14pins RC06 Remote Control 2 up/down Cable RC03/04/05/06 L=5m 14pins Cable RC03/04/05/06 L=10m 14pins Cable RC03/04/05/06 L=15m 14pins RC08 Remote Control Digimanager TECHNICAL DATA 14pins CODICE KIT Digimanager RC08 Remote Control Digimanager Cable RC08 L=5m 14pins Cable RC08 L=10m 14pins Cable RC08 L=15m 14pins Kit Digimanager Kit Push-Pull TECHNICAL DATA INPUT 48VAC OUTPUT 42VDC KIT PUSH PULL 321 PULSE / WF KIT PUSH PULL 320MKS WF105/ _

88 Adaptor A1 Adaptor AMPHENOL-MILITARY A Adaptor A2 Adapter MILITARY-AMPHENOL A OVERCUT BOX (Generator Protection) single phase TECHNICAL DATA 500Vac ± 50-60Hz 32A 100% 21S 210 x 120 x 140mm OVERCUT BOX (Generator Protection) _

89 Gas regulator MANOMETER TECHNICAL DATA GAS Ar - Ar/CO 2 200bar Gas regulator MANOMETER Gas regulator FLOWMETER TECHNICAL DATA GAS Ar - Ar/CO 2 200bar Gas regulator FLOWMETER _

90 Suitcase 01 ABS BLACK TECHNICAL DATA 400 x 370 x 220mm MACHINE Suitcase 01 ABS BLACK Suitcase 02 ABS BLACK TECHNICAL DATA 500 x 400 x 270mm MACHINE Suitcase 02 ABS BLACK Suitcase 03 ABS BLACK (Without Pocket) TECHNICAL DATA 500 x 400 x 270mm MACHINE Suitcase 03 ABS BLACK Kit MMA COMPOSITION MASK Electrode Holder 16mm2 L=3m Earth Cable 16mm2 L=2.5m BRUSH - HAMMER MACHINE KIT MMA _

91 Electrode Holder 16 mm 2 Earth Cable 16 mm 2 TECHNICAL DATA L 3m X% 150A (60%) 200A (35%) Electrode Holder 16mm 2 L= 4m Electrode Holder 35 mm 2 TECHNICAL DATA L 2m X% 150A (60%) 200A (35%) 40mm Earth Cable 16mm 2 L=3m Earth Cable 35 mm 2 TECHNICAL DATA L 4m X% 300A (60%) 400A (35%) Electrode Holder 35mm 2 L= 4m TECHNICAL DATA L 4m X% 300A (60%) 400A (35%) 74mm Earth Cable 35mm 2 L=4m Electrode Holder 70 mm 2 Earth Cable 70 mm 2 TECHNICAL DATA L 4m X% 400A (60%) 500A (35%) Electrode Holder 70mm 2 L= 4m TECHNICAL DATA L 4m X% 400A (60%) 500A (35%) 74mm Earth Cable 70mm 2 L=4m _

92 Torch TIG 17 valve L=4m Torch TIG 26 valve L=4m TECHNICAL DATA X% 140A (35%) DC 125A (35%) AC GAS Argon Torch TIG 17 valve L= 4m Torch TIG 17 L=4m AIR PT TECHNICAL DATA X% 180A (35%) DC 150A (35%) AC GAS Argon Torch TIG 26 valve L= 4m Torch TIG 17 L=4m AIR EURO TECHNICAL DATA X% 140A (35%) DC 100A (35%) AC GAS Argon Torch TIG 17 L=4m AIR PT TECHNICAL DATA X% 140A (35%) DC 125A (35%) AC GAS Argon Torch TIG 17 L= 4m AIR EURO Torch TIG 26 L=4m AIR PT Torch TIG 26 Potentiometer L=4m TECHNICAL DATA X% 180A (35%) DC 150A (35%) AC GAS Argon Torch TIG 26 L=4m AIR PT TECHNICAL DATA X% 180A (35%) DC 130A (35%) AC GAS Argon Torch TIG 26 L=4m AIR Potentiometer _

93 Torch TIG 26 L=4m AIR Up/Down Torch TIG 26 L=4m AIR EURO TECHNICAL DATA X% 180A (35%) DC 150A (35%) AC GAS Argon Torch TIG 26 L=4m AIR Up/Down TECHNICAL DATA X% 180A (35%) DC 150A (35%) AC GAS Argon Torch TIG 26 L= 4m AIR EURO Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer TECHNICAL DATA X% 320A (35%) DC 270A (35%) AC GAS Argon Torch TIG 18 L=4m H2O PT TECHNICAL DATA X% 320A (35%) DC 270A (35%) AC GAS Argon Torch TIG 18 L=4m H2O Potentiometer Torch TIG 18 L=4m H2O Up/Down TECHNICAL DATA X% 320A (100%) DC 230A (100%) AC GAS Argon Torch TIG 18 L=4m H2O Up/Down _

94 Torch MIG 15 L=3m AIR Torch MIG 25 L=4m AIR TECHNICAL DATA X% 180A (60%) CO2 150A (60%) MIX ø mm Torch MIG 15 L= 3m AIR EURO TECHNICAL DATA X% 230A (60%) CO2 200A (60%) MIX ø mm Torch MIG 25 L= 4m AIR EURO Torch MIG 36 L=4m AIR Torch MIG 240 L=4m H2O TECHNICAL DATA X% 340A (60%) CO2 320A (60%) MIX ø mm Torch MIG 36 L= 4m AIR EURO Torch MIG Digimanager 240 L=4m H2O TECHNICAL DATA X% 300A (100%) CO2 270A (100%) MIX ø mm Torch MIG 240 L= 4m AIR EURO Torch MIG MB 501D L=4m H2O X% ø mm TECHNICAL DATA 300A (100%) CO2 270A (100%) MIX 300A (100%) PULS X% ø mm TECHNICAL DATA 550A (100%) CO2 500A (100%) MIX 325A (100%) PULS Torch MIG MB 240D L=4m Digimanager Torch MIG MB 501D L=4m H2O _

95 Torch MIG Digimanager 501 L=4m H2O Torch MIG Spool Gun Plus 15 L=6m Euro X% ø mm Torch MIG MB 501D L=4m Digimanager TECHNICAL DATA 550A (100%) CO2 500A (100%) MIX A (100%) PULS TECHNICAL DATA X% 230A (60%) CO2 200A (60%) MIX ø mm Torch MIG SPOOL GUN PLUS 15 L=6m EURO _

96 Kit Upgrading Software Pioneer Pulse / Power Pulse Kit Upgrading Software Pioneer Pulse / Power Pulse _

97 Roll D30 - d14 Roll D30 - d22 30mm 14mm 30mm 22mm ROLL ROLL SG2/SG3 0.6/0.8 D=30 d=14 V /1.0 D=30 d=14 V /1.2 D=30 d=14 V /1.6 D=30 d=14 V SG2/SG3 0.8/1.0 D=30 d=22 V /1.2 D=30 d=22 V /1.6 D=30 d=22 V Al / SS 0.8/1.0 D=30 d=14 U /1.2 D=30 d=14 U /1.6 D=30 d=14 U FCW 1.0/1.2 D=30 d=14 VK /1.6 D=30 d=14 VK MACHINE PIONEER 321MKS - MICROMAG 301 PLUS MICROMAG 302MFK - MICROPULSE 302MFK Roll D37 - d19 Al / SS FCW /1.2 D=30 d=22 U MACHINE WF103 Roll D40 - d22 37mm 19mm 40mm 22mm SG2/SG3 Al / SS FCW ROLL 0.6/0.8 D=37 d=19 V /1.0 D=37 d=19 V /1.2 D=37 d=19 V /1.6 D=37 d=19 V /1.0 D=37 d=19 U /1.2 D=37 d=19 U /1.6 D=37 d=19 U /2.0 D=37 d=19 U /3.2 D=37 d=19 U /1.2 D=37 d=19 VK /1.6 D=37 d=19 VK /3.2 D=37 d=19 VK SG2/SG3 Al / SS FCW ROLL 0.6/0.8 D=40 d=22 V /1.0 D=40 d=22 V /1.2 D=40 d=22 V /1.0 D=40 d=22 U /1.2 D=40 d=22 U /1.2 D=40 d=22 VK FLAT D=37 d=19 FLAT MACHINE D=37 d=19 knurled FLAT MACHINE PIONEER 401MKS - PIONEER 321 PULSE - WF104/105/106/107 11_

98 WECO srl Via S. Antonio 22 - Loc. Belvedere Tezze sul Brenta (Vicenza) - Italy Tel fax info@weco.it - DISTRIBUTOR

WELDING THE FUTURE - TODAY!

WELDING THE FUTURE - TODAY! TODAY! THE Technical Data MAX 403 MAX 403S multiprocess inverter, stick, tig lift, mig, pulse mig Main Voltage Phase Frequency Real Current (35%) Real Power (35%) Power Factor No Load Voltage Current Range

More information

CITOTIG II DC Industrial range

CITOTIG II DC Industrial range CITOTIG II DC Industrial range The best of TIG welding using inverter technology for the most demanding welders. www.oerlikon-welding.com CITOTIG II DC Industrial range Single or three-phase portable inverters

More information

Welding. Product Catalogue. Total Welding & Cutting Solutions ISO 9001 ISO OHSAS PREMIUM QUALITY

Welding. Product Catalogue. Total Welding & Cutting Solutions ISO 9001 ISO OHSAS PREMIUM QUALITY Welding Product Catalogue LAUNCH PROMOTION Total Welding & Cutting Solutions ISO 9001 ISO 14001 OHSAS 18001 PREMIUM QUALITY Quality & Standard ISO 9001 ISO 14001 OHSAS 18001 Developed according to international

More information

MERKLE OptiMIG. The MIG/MAG Industrial series! MIG/ MAG

MERKLE OptiMIG. The MIG/MAG Industrial series!   MIG/ MAG MERKLE OptiMIG. The MIG/MAG Industrial series! MIG/ MAG www.merkle.de MIG/ MAG Merkle OptiMIG MIG/MAG series OptiMIG The series OptiMIG 350/450/550 consists of step controlled MIG/MAG welding units from

More information

ADVANCEMIG Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps

ADVANCEMIG Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps ADVANCEMIG 200 - Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps ORDER CODE: Ex GST Inc GST $2,194.00 $2,523.10 W1107 MODEL: ADVANCEMIG 200 Type: MIG / TIG / MMA & Multifunction Part Number:

More information

PipeWorx Welding System

PipeWorx Welding System PipeWorx Welding System Issued Aug. 009 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe The Power

More information

VIPER MIG-MMA Welder Package Amps #KUMJRVW182 $ $ Product Brochure For K019A. Description. Features

VIPER MIG-MMA Welder Package Amps #KUMJRVW182 $ $ Product Brochure For K019A. Description. Features VIPER 182 - MIG-MMA Welder Package 30-180 Amps #KUMJRVW182 Package Deal Ex GST Inc GST $530.00 $583.00 Package Contents - SAVE $51.50 (Inc) 1 x W244 - VIPER 182 Multi-Function Inverter Welder-MIG-MMA $519.00

More information

Minarc Evo family Wherever work takes you

Minarc Evo family Wherever work takes you Wherever work takes you Minarc Evo 180 Benefits More powerful and affordable than ever before The little MMA giant is back, stronger than ever Kemppi has upgraded the powerful Minarc Evo equipment range.

More information

MERKLE CompactMIG. The professional MIG/MAG series! MIG / MAG ELECTRODE

MERKLE CompactMIG. The professional MIG/MAG series!  MIG / MAG ELECTRODE MERKLE CompactMIG. The professional MIG/MAG series! MIG / MAG ELECTRODE www.merkle.de THE COMPACT POWERFUL MIG/MAG-MACHINES! CompactMIG 280 K CompactMIG 400 K Functionality and ease of operation Simple,

More information

PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS

PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS 2018 PRODUCT GUIDE Dent Pulling Solutions for Steel & Aluminum Dual-Spotter Solutions for Steel & Aluminum Panels UNI-9700 DELUXE Aluminum & Steel

More information

MAX 503/ 503 IP54/ 503 IP54- ATX

MAX 503/ 503 IP54/ 503 IP54- ATX igh performances and Safety The many Multi-Process combinations from this robust globetrotter offer safe solutions to wide range of welding applications. Underground or Cross-country, Off-shore, Petro-che,

More information

HIGHLIGHTS. TIG Welding Machine for the Professional Welder

HIGHLIGHTS. TIG Welding Machine for the Professional Welder HIGHLIGHTS TIG Welding Machine for the Professional Welder HF ignition or Liftarc Infinitely adjustable: Welding current (5A to 160A) Down-Slope time, gas post-flow time Gas pre-flow time 0,2sec. (fixed)

More information

Improves Safety, Productivity & Profitability.

Improves Safety, Productivity & Profitability. Improves Safety, Productivity & Profitability. TM GAME-CHANGING TECHNOLOGIES CAN STOP YOU FROM WASTING HOURS EVERY DAY. ArcReach welding technology minimises the non-valueadded time spent walking to and

More information

Inverter Series. Lightweight & Portable FOR ONSITE & FIELD MAINTENANCE

Inverter Series. Lightweight & Portable FOR ONSITE & FIELD MAINTENANCE Inverter Series Lightweight & Portable FOR ONSITE & FIELD MAINTENANCE WIA s Inverter Series Weldmatic 200i, Weldarc 180i & Weldarc 140i The Weldmatic 200i, Weldarc 180i and Weldarc 140i are lightweight

More information

Transmig F: CIGWELD.COM.AU

Transmig F: CIGWELD.COM.AU AUTO SET WELDING INVERTER Transmig 1300 654 674 F: 03 9474 7391 enquiries@cigweld.com.au CIGWELD.COM.AU Our customers spoke and we listened. CIGWELD have been listening to market feedback about having

More information

A3 MIG Welder. All-inclusive welding solution for robotic applications. And you know.

A3 MIG Welder. All-inclusive welding solution for robotic applications. And you know. All-inclusive welding solution for robotic applications And you know. 2 3 12 9 7 5 4 8 11 1 10 6 1 Power source 7 Wire conduit 2 Wire feeder 8 Wire spool set 3 Wire feeder roller kit 9 Wire feeder mounting

More information

NEW IN OUR PRODUCT RANGE!

NEW IN OUR PRODUCT RANGE! NEW IN OUR PRODUCT RANGE! until revocation DigiStar MIG/MAG Inverter 350/500 perfect to welding stainless steel and cored wire WIG HF MMA & Spot welding Features 2-cycle/4-cycle With digital voltmeter

More information

TransPuls Synergic MIG/MAG, TIG DC & rod electrode (MMA) welding

TransPuls Synergic MIG/MAG, TIG DC & rod electrode (MMA) welding TransPuls Synergic 2700 MIG/MAG, TIG DC & rod electrode (MMA) welding What do you get when you cross digital quality with portability? GENERAL REMARKS UTILISATION A high-performance system The TPS 2700

More information

WELDING MACHINES 08 / 2018

WELDING MACHINES 08 / 2018 WELDING MACHINES 08 / 2018 WE MANUFACTURE WELDING CONSUMABLES & EQUIPMENT Magmaweld is a manufacturer of Stick Electrodes, MIG/MAG & TIG Wires, Flux Cored Wires, SubmergedArc Wires and Fluxes, Welding

More information

KEMPPI K8 WELDING EQUIPMENT. X8 MIG Welder THE FUTURE OF WELDING IS HERE

KEMPPI K8 WELDING EQUIPMENT. X8 MIG Welder THE FUTURE OF WELDING IS HERE KEMPPI K8 WELDING EQUIPMENT X8 MIG Welder THE FUTURE OF WELDING IS HERE 8.12.2017 X8 MIG Welder THE MOST ADVANCED MULTI-PROCESS WELDING EQUIPMENT IN THE MARKET The X8 MIG Welder covers it all, from synergic

More information

Transmig 3 Phase & Synergic Pulse

Transmig 3 Phase & Synergic Pulse Transmig 3 Phase & Synergic Pulse CIGWELD Professional: When welding is your business At CIGWELD we distinguish ourselves from our competition through superior featured, dependable products, technical

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Stick (SMAW) Flux Cored (FCAW) Air Carbon Arc (CAC-A) Cutting and Gouging. Invision 354MP

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Stick (SMAW) Flux Cored (FCAW) Air Carbon Arc (CAC-A) Cutting and Gouging. Invision 354MP 354MP/456MP Issued Aug. 27 Index No. DC/23 Invision MIG Welding Power Source Quick Specs Industrial Applications Metal Fabrication Heavy Manufacturing Construction Light Manufacturing Processes MIG (GMAW)

More information

MMA welding. Minarc Evo 46 Minarc Master MLS 50 FastMig KMS 400 AS 52 KempGouge 54

MMA welding. Minarc Evo 46 Minarc Master MLS 50 FastMig KMS 400 AS 52 KempGouge 54 44 MMA welding MMA welding Minarc Evo 46 Minarc 220 48 Master MLS 50 FastMig KMS 400 AS 52 KempGouge 54 Compact, lightweight and capable. Kemppi MMA equipment meets professional welding demands in every

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () MIG

More information

PipeWorx Welding System

PipeWorx Welding System PipeWorx Welding System Issued Jan. 011 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes

More information

X8 MIG Welder THE FUTURE OF WELDING IS HERE

X8 MIG Welder THE FUTURE OF WELDING IS HERE X8 MIG Welder THE FUTURE OF WELDING IS HERE "The X8 MIG Welder is a first-class equipment for demanding, high-quality aluminum welding from the point of view of both arc performance and usability." Kimmo

More information

Alura Trailer Mobile Workshop Systems

Alura Trailer Mobile Workshop Systems Diesel Generator TIG / Electrod Welding MIG / MAG Welding Hand Grinders Hand Drille Hand Tools Air Compressor High pressure washing Column Drilled Lahte Mahcine / 1.000mm Mobile Starting Assistance Grinders

More information

HiArc family Professional performance - simple control

HiArc family Professional performance - simple control HiArc family Professional performance - simple control 1 Professional performance - Simple control The distinctive grey casing colour of HiArc weld ing equipment communicates professional welding per formance,

More information

VIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVM150 Ex GST Inc GST. $ $ $ $ Special Ends 31/12/2018

VIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVM150 Ex GST Inc GST. $ $ $ $ Special Ends 31/12/2018 VIPER 150 - Multi-Function Inverter Welder-MIG-MMA 30-150 Amps #KUMJRVM150 Ex GST Inc GST $430.00 $473.00 $400.00 $440.00 Special Ends 31/12/2018 ORDER CODE: W245 MODEL: VIPER 150 Type: MIG / MMA & Multifunction

More information

Processes MIG (GMAW)/Pulsed MIG (GMAW-P) Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)

Processes MIG (GMAW)/Pulsed MIG (GMAW-P) Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A) XMT 34/456 CC/CV Issued August 21 Index No. DC/18.8 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication

More information

SPEEDTEC 200C BR OPERATOR S MANUAL IM /2016 REV03 ENGLISH

SPEEDTEC 200C BR OPERATOR S MANUAL IM /2016 REV03 ENGLISH SPEEDTEC 200C BR OPERATOR S MANUAL IM3058 05/2016 REV03 ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu 12/05 THANKS! For having chosen

More information

MINI MIG MIG Welder Amps

MINI MIG MIG Welder Amps MINI MIG 180 - MIG Welder 35-180 Amps #KMM180 ORDER CODE: W240 MODEL: MINI MIG 180 Type: MIG Part Number: KMM180 Voltage (V): 240 Recommended Plug Amperage (amp): 15 Welding Current Range MIG (amp): 35-180

More information

STT II Power Wave C300 Power Wave S350. Power Wave 455M/(STT) KEY: Excellent Good Optional. Computer screen showing waveform arc characteristic.

STT II Power Wave C300 Power Wave S350. Power Wave 455M/(STT) KEY: Excellent Good Optional. Computer screen showing waveform arc characteristic. A Wide Variety of Welding Waveforms for Every Application Fast, Reliable Digital Communication Expand or Update With Lincoln s Latest Welding Multi-Process Welding On A Variety Of Materials Waveform Control

More information

Welding & Cutting EQUIPMENT PRODUCT CATALOGUE.

Welding & Cutting EQUIPMENT PRODUCT CATALOGUE. Welding & Cutting EQUIPMENT PRODUCT CATALOGUE LINCOLN RANGE OF GAS REGULATORS Model LE601D-L For light duty MIG/TIG welding applications. Model LE651 All welding applications. Deliver high accuracy gas

More information

MIG 300 D3 Synergic puls

MIG 300 D3 Synergic puls MIG 300 D3 Synergic puls 290-030450-00000 TEAMWELDER MIG 300 D3 SYNERGIC the powerful multi-talent featuring three welding procedures MIG/MAG, MMA and TIG Welding of self-shielded flux cored wires without

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG (GMAW)** Flux Cored

More information

DIGIPULS III 320C DIGISTEEL III 320C

DIGIPULS III 320C DIGISTEEL III 320C DIGIPULS III 320C DIGISTEEL III 320C Innovative and powerful MIG/MAG machine with integrated feeder www.saf-fro.com DIGIPULS III 320C - DIGISTEEL III 320C Modest in size, but with everything a big machine

More information

WELDING & CUTTING EQUIPMENT

WELDING & CUTTING EQUIPMENT WELDING & CUTTING EQUIPMENT www.dnhsecheroninds.com PROILE D & H Sécheron in a span of over 48 years has become a well established/well accepted group of welding companies. D & H Sécheron Industries Private

More information

Equipment for manual metal arc (MMA) welding

Equipment for manual metal arc (MMA) welding Equipment for manual metal arc (MMA) welding www.cemont.com POWER SOURCES FOR MMA WELDING COLT 2.5 / 3.2 Ø ELECTRODES.6 to 3.2 mm The COLT range, known for its exceptional weight/power ratio, is suitable

More information

GENERAL WELDING PRODUCTS CATALOG

GENERAL WELDING PRODUCTS CATALOG GENERAL WELDING PRODUCTS CATALOG The Thermadyne Specialty Markets group operates within multiple distribution channels to meet the needs of several distinct industry segments. Specialty Markets These

More information

SubArc Digital Series

SubArc Digital Series Series Issued June 208 Index No. AD/7. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes Submerged

More information

KEMPPI K5 WELDING EQUIPMENT. MinarcMig Evo 200 ULTIMATE ENERGY PERFORMANCE WITH PORTABLE COMFORT

KEMPPI K5 WELDING EQUIPMENT. MinarcMig Evo 200 ULTIMATE ENERGY PERFORMANCE WITH PORTABLE COMFORT KEMPPI K5 WELDING EQUIPMENT MinarcMig Evo 200 ULTIMATE ENERGY PERFORMANCE WITH PORTABLE COMFORT 6.04.2018 MinarcMig Evo 200 EASY MIG/MAG WELDING FOR THE MOBILE WELDER MinarcMig Evo 200 is a portable MIG/MAG

More information

STANDARD WELDING AND PLASMA CUTTING EQUIPMENT

STANDARD WELDING AND PLASMA CUTTING EQUIPMENT STANDARD WELDING AND PLASMA CUTTING EQUIPMENT 8th EDITION 2 WELDING AND CUTTING TECHNOLOGY For over 100 years now ESAB has been one of the leading and most innovative companies in welding and cutting technology

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux

More information

3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range

3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range PowerMaster Range Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded

More information

Power MIG. The Professional s Choice.

Power MIG. The Professional s Choice. WIRE FEEDER/WELDERS Power MIG. The Professional s Choice. When you want the flexibility of more than just a MIG machine, the new is the choice for you. Lincoln Chopper Technology delivers more welding

More information

Standard welding and plasma cutting equipment. 7th EDITION

Standard welding and plasma cutting equipment. 7th EDITION Standard welding and plasma cutting equipment 7th EDITION Welding and cutting technology For over 100 years now ESAB has been one of the leading and most innovative companies in welding and cutting technology.

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux

More information

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux-Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux-Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A) XMT 350/450 Series Issued July 2012 Index No. DC/18.83 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication

More information

Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources

Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources FP90 Enjoy the ease of wire feed welding at an affordable price. This unit operates on standard 115 volt household current and requires no

More information

english Technologies and systems for automatic and robot welding lines

english Technologies and systems for automatic and robot welding lines english Technologies and systems for automatic and robot welding lines THE TECHNOLOGY OF TOMORROW, TODAY Selco has developed a range of all-new and highly innovative hardware and software solutions for

More information

HOW TO CONTACT US Telephone overseas Fax overseas

HOW TO CONTACT US Telephone overseas Fax overseas 1 A-H AC/DC clamp meter 20 AC/DC TIG machines 4, 14, 16 Add on TIG boxes 23 Air regulators & fittings 57 Amphenol connectors 63-64 Arc air gouging machines 10, 12, 13, 18 Arc voltage controller (AVC) 25

More information

MULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS

MULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS FLEXTEC 650X MULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS Shown: K3425-1 SIMPLE. RELIABLE. FLEXIBLE. This multi-process welder delivers up to 815 amps of welding power for a variety of applications,

More information

PipePro Welding System

PipePro Welding System PipePro Welding System Root-Fill-Cap Welding Issued Apr. 00 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe Fabrication

More information

Enhanced low-end performance for stainless steel and thin-metal applications.

Enhanced low-end performance for stainless steel and thin-metal applications. XMT 400 CC/CV Issued January 2004 Index No. DCX/18.92 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck and Trailer Manufacturing Fabrication

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) Millermatic 255 Issued Oct. 2018 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops

More information

KEMPPI K7 WELDING EQUIPMENT. A7 MIG Welder 450 ENGINEERED FOR YOUR PROFIT

KEMPPI K7 WELDING EQUIPMENT. A7 MIG Welder 450 ENGINEERED FOR YOUR PROFIT KEMPPI K7 WELDING EQUIPMENT A7 MIG Welder 450 ENGINEERED FOR YOUR PROFIT 12.05.2018 A7 MIG Welder 450 THE NEW STANDARD IN ROBOTIC MIG WELDING A7 MIG Welder 450 is the state-of-the-art solution for robotic

More information

SPEEDTEC 215C OPERATOR S MANUAL IM /2016 REV01 ENGLISH

SPEEDTEC 215C OPERATOR S MANUAL IM /2016 REV01 ENGLISH SPEEDTEC 215C IM3057 06/2016 REV01 OPERATOR S MANUAL ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu Declaration of conformity Lincoln

More information

PLASMA. Product Catalogue 1.0/V1.

PLASMA. Product Catalogue 1.0/V1. T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 1.0/V1 www.binzel-abicor.com Content PLASMA-Cutting Torches Plasma-Cutting Torches ABIPLAS CUT air-cooled Page 04 05 ABIPLAS

More information

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It. Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Sept. 2010 Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG

More information

Pioneer 321 MKS. Instruction manual

Pioneer 321 MKS. Instruction manual WECO srl Via S. Antonio, 22 - BELVEDERE 36056 TEZZE SUL BRENTA (VICENZA) ITALY Tel.+39 0424 561943 Fax +39 0424 561944 www.weco.it - E-mail info@weco.it GB Instruction manual 2/32 0 1 INTRODUCTION... 4

More information

PipePro Welding System

PipePro Welding System PipePro Welding System Root-Fill-Cap Welding Issued Feb. 008 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe

More information

Specifications for Arc welding Robot with Hot wire TIG welding Unit Specifications for Arc welding Robot

Specifications for Arc welding Robot with Hot wire TIG welding Unit Specifications for Arc welding Robot Specifications for Arc welding Robot with Hot wire TIG welding Unit Specifications for Arc welding Robot S.No Specification 1 Arm type Articulated 2 Number of Axes 6 3 Robot Wrist (4,5,6 axes) Thermally

More information

TIG IS GETTING MORE COMPACT

TIG IS GETTING MORE COMPACT TIG IS GETTING MORE COMPACT 2 The efficiency package Flexibility with integrated water cooling The water-cooled series is the right solution for a wide range of tasks. The compact combination units offer

More information

WALTER europe

WALTER europe State of the Art Inverter Welders: Designed and Manufactured in Serbia WALTER ------- europe atom 200 cell ------- PROFESsional MMA/cell INFO FLASH. WALTER ATOM 200 MMA CELL A tool that will reliably finish

More information

Semi-Automatic Wire Feeders. Semi-Automatic Contents Wire Feeders. Equipment

Semi-Automatic Wire Feeders. Semi-Automatic Contents Wire Feeders. Equipment Semi-Automatic Contents Wire Feeders Semi-Automatic Wire Feeders LF-72 & LF-74 LN-742 LN-8 LN-9 LN-10 DH-10 Power Feed TM 25M Power Feed TM 10M Power Feed TM 10M Dual LN-23P LN-25 Page 2 Page 3 Page 4

More information

Dimension Multiprocess Welding

Dimension Multiprocess Welding Series Issued Nov. 9 Index No. DC/19.2 Dimension Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Fabrication and Construction Heavy Manufacturing MRO Maintenance/Repair Pressure

More information

Power MIG. The Professional s Choice.

Power MIG. The Professional s Choice. WIRE FEEDER/WELDERS Power MIG. The Professional s Choice. When you want the flexibility of more than just a MIG machine, the new is the choice for you. Lincoln Chopper Technology delivers more welding

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) Millermatic 255 Issued January 2019 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops

More information

Bryan Fuller - and avid welder Product Catalog.

Bryan Fuller - and avid welder Product Catalog. Bryan Fuller - host of TWO GUYS GARAGE and avid welder. 2009 Product Catalog www.lincolnelectric.com INTRODUCTION The Lincoln Electric Company The Welding Experts Welding is everywhere, and Lincoln Electric

More information

*Available on select models.

*Available on select models. XMT 350 Series Issued Sept. 2017 Index No. DC/18.93 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/trailer manufacturing Fabrication

More information

PipeWorxFieldPro System

PipeWorxFieldPro System PipeWorxFieldPro System Issued June 2013 Index No. PWS/6.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Field Operations Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes

More information

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1 TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) DC stick (SMAW) DC Lift-Arc TIG (GTAW) Pulsed TIG (GTAW-P)

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) DC stick (SMAW) DC Lift-Arc TIG (GTAW) Pulsed TIG (GTAW-P) Multimatic 255 MIG/Multiprocess Power Source, Wire Feeder and Gun Package Issued January 2019 Index No. DC/12.9 Quick Specs Industrial Applications Contract welding services Plant maintenance shops General

More information

Intelligent Welding and Air Solutions for the Automotive Professional

Intelligent Welding and Air Solutions for the Automotive Professional +353 1 419 1611 www.techntools.ie Unit A1 Knockmitten, Western Industrial Estate, Dublin 12, Ireland Intelligent Welding and Air Solutions for the Automotive Professional www.techntools.ie MIG 160 Package

More information

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It. Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG Welders Fully

More information

JM-160C,JM-175C, JM-180C, JM-200C

JM-160C,JM-175C, JM-180C, JM-200C wilkinsonstar.com MIG Series MIG/MAG/MMA Compact welding machines Order code! JM-160C,JM-175C, JM-180C, JM-200C OPERATOR MANUAL Your new product Thank you for selecting this Jasic Technology, Wilkinson

More information

THE AUTOWELD SYSTEM. Automated Pipe Welding System. High Productivity

THE AUTOWELD SYSTEM. Automated Pipe Welding System. High Productivity THE AUTOWELD SYSTEM Automated Pipe Welding System High Productivity THE AUTOWELD SYSTEM The System is so simple, with just a few quick connections you re ready to weld! You re probably wondering how that

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) DC stick (SMAW) DC Lift-Arc TIG (GTAW) Pulsed TIG (GTAW-P)

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) DC stick (SMAW) DC Lift-Arc TIG (GTAW) Pulsed TIG (GTAW-P) Multimatic 255 MIG/Multiprocess Power Source, Wire Feeder and Gun Package Issued Nov. 2018 Index No. DC/12.9 Quick Specs Industrial Applications Contract welding services Plant maintenance shops General

More information

Pioneer 321 MSR. 2/14 Antwerpsesteenweg Gent - Oostakker T +32 (0) F +32 (0)

Pioneer 321 MSR. 2/14 Antwerpsesteenweg Gent - Oostakker   T +32 (0) F +32 (0) GB Instruction manual 2/14 www.welda.be F +32 (0)9 355 92 01 0 1 INTRODUCTION... 4 2 FRONT PANEL... 4 3 REAR PANEL... 5 4 INSTALLATION... 6 4.1 UNIT ASSEMBLY... 6 4.2 CONNECTIONS TO THE ELECTRICAL MAINS

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS Multi-WeldTM 350 MULTI-OPERATOR Connect Several DC+ Welders to One Power Supply. The is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the

More information

Light, Compact... and Portable

Light, Compact... and Portable INERTER Light, Compact... and Portable Year * Dragster 85 comes with: Power cord & plug 2 x dinse 25mm plugs Carrying strap Best package systems Order Information Part No: 0-3077 Description: Dragster

More information

The new standard in WIG welding

The new standard in WIG welding The new standard in WIG welding 2 Working at the highest level WIG welding redefined The new range revolutionises WIG welding from start to finish. Duration of use, welding seam quality and energy efficiency

More information

OWNER S OPERATING MANUAL

OWNER S OPERATING MANUAL OWNER S OPERATING MANUAL MIG/TIG/ARC 240 ELECTRONIC INVERTER INVERTER MULTI PULSE PRO TABLE OF CONTENTS Safety instructions 3-4 Multi Pulse Pro 240 Welder 5 Page Installation 6 Welder Information 6-9

More information

Tel: Fax MTS255S

Tel: Fax MTS255S www.r-techwelding.co.uk email: sales@r-techwelding.co.uk Tel: 01452 733933 Fax 01452 733939 MTS255S MIG-TIG-MMA WELDING MACHINE OPERATION INSTRUCTIONS Version 2017-10 - 2 - Thank you for selecting the

More information

TECHNICAL SERVICE MANUAL FOR MASTERTIG ACDC MACHINES

TECHNICAL SERVICE MANUAL FOR MASTERTIG ACDC MACHINES TECHNICAL SERVICE MANUAL FOR MASTERTIG ACDC MACHINES TECHNICAL SERVICE MANUAL FOR MASTERTIG ACDC INTRODUCTION / GENERAL MAINTENANCE OF MASTERTIG ACDC Maintenance of the Mastertig ACDC machine would normally

More information

Miller PipePro Auto XCS

Miller PipePro Auto XCS Pg. 1/7 Pg. 2/7 Digital Automatic Welding System specific to weld the root pass with or without backing support in the pipeline. Note: the system needs to be fed with an electric generator having a minimum

More information

A7 MIG Welder 350/450 New standard in Robotic welding. General presentation

A7 MIG Welder 350/450 New standard in Robotic welding. General presentation A7 MIG Welder 350/450 New standard in Robotic welding General presentation 2016.04.18 2 Complete arc welding function package for robotic welding from KEMPPI Wire feeder Torch cable bundle length according

More information

MIG Welding Equipment Operations Reference Guide

MIG Welding Equipment Operations Reference Guide MIG Welding Equipment Operations Reference Guide Fronius USA Office: 1-877-376-6487 www.fronius-usa.com General Information Table of Contents Conversion Charts page 1 3d-Drawing page 2 Weld System Component

More information

QUATRO 450 OPERATOR S MANUAL

QUATRO 450 OPERATOR S MANUAL QUATRO 450 OPERATOR S MANUAL IMPORTANT DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL AND THE SAFETY SECTION CONTAINED INSIDE THIS MANUAL STARWELD WELDING SOLUTIONS WEBSITE:

More information

E EQUIPMENT CATALOG.

E EQUIPMENT CATALOG. E1. 10 2012 EQUIPMENT CATALOG www.lincolnelectric.com About the cover photo Scan this tag for the video of the wind tower construction The cover photo was taken at Katana Summit, LLC during the actual

More information

Machines for welding automatisation Renting machines for every case.

Machines for welding automatisation Renting machines for every case. Machines for welding automatisation Renting machines for every case. ARTwelding GmbH In der Aue 14 34613 Schwalmstadt Tel: +49 6691 927 3338 Fax: +49 6691 927 3339 Mail: info@artwelding.de -Germany- 1

More information

Smootharc Advance MIG Range

Smootharc Advance MIG Range Smootharc Advance MIG Range Introducing a modern-style family of MIG/MAG welding machines that are sleek in design but perform like workhorses. These inverter-based machines offer high duty cycles at rated

More information

PLASMA. Product Catalogue 2.0/V1.

PLASMA. Product Catalogue 2.0/V1. T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 2.0/V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS AUTOMATED SOLUTIONS Tandem MIG Process Increased Production Tandem MIG is a dual wire, high productivity GMAW process designed for flexible robotic or fixed hard automation welding applications. The process

More information

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A) XMT 350 Series Issued August 2010 Index No. DC/18.83 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication

More information

PF22 OPERATOR S MANUAL IM /2017 REV03 ENGLISH

PF22 OPERATOR S MANUAL IM /2017 REV03 ENGLISH PF22 IM3046 05/2017 REV03 OPERATOR S MANUAL ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu Declaration of conformity Lincoln Electric

More information

Inverter Welding System

Inverter Welding System POWER WAVE 455/STT AND POWER FEED 10 DUAL Inverter Welding System NEW! POWER WAVE 455/STT AND POWER FEED 10 DUAL ADVANTAGE LINCOLN HIGHEST PERFORMANCE SYSTEM Superior STT, pulsed GMAW and FCAW welding

More information

88 Plasma Cutting Cuts Steel, stainless steel, aluminium, cast iron, copper brass, titanium, magnesium alloys Typical Usage Metal fabrication, construction, weld repair, automotive repair, automotive racing,

More information

OWNER S OPERATING MANUAL

OWNER S OPERATING MANUAL OWNER S OPERATING MANUAL MIG/TIG/ARC 200 ELECTRONIC INVERTER INVERTER MULTITASK TABLE OF CONTENTS Safety instructions 3-4 Multitask 200 Welder 5 Page Installation 6 Welder Information 6-8 Control panel

More information