Section 7: Price Schedule Form 1

Transcription

1 Section 7: Price Schedule Form The Bidder is required to prepare the Price Schedule as indicated in the Instruction to Bidders. The Price Schedule must provide a detailed cost breakdown of all goods and related services to be provided, from unit price to lot prices. Separate figures must be provided for each functional grouping or category, if any. Any estimates for cost-reimbursable items, such as travel of experts and out-of-pocket expenses, should be listed separately. The format shown on the following pages is suggested for use as a guide in preparing the Price Schedule. The format includes specific expenditures, which may or may not be required or applicable but are indicated to serve as examples. A. Cost Breakdown per Deliverable Items* No. Deliverables [list them as referred to in the ITB] LOT (+B) Supply and install solar system 500watt TO HODEIDA AND HAJJA For more technical details Please see attached annex LOT (+B) Supply and install solar system 500watt TO ABYAN AND LAHJ For more technical details Please see attached annex Qty 9 compete solar system 6 compete solar system Expected Date of Delivery/Complet ion Percentage of Total Price Price (Lump Sum, All Inclusive) Total 00% * This shall be the basis of payment tranches No deletion or modification may be made in this form. Any such deletion or modification may lead to the rejection of the Bid.

2 B. Cost Breakdown by Cost Component: The Bidders are requested to provide the cost breakdown for the above given prices for each deliverable based on the following format. UNDP shall use the cost breakdown for the price reasonability assessment purposes as well as the calculation of price in the event that both parties have agreed for additional set of goods and/or related services. NO LOT (A) : 8 COPLETE SOLAR SYSTE for 500w to HODEIDA governorate as per the below detail specification for each system. Detail specification for one system for 500w Solar Systems Technical Specification Technical Specification Photovoltaic odule Specification odule Type : Polycrystalline Power Output : 55 watts Cell number 60 cells odule Efficiency : Not less then 5 % Open Circuit Voltage (Voc) : 37.6 V aximum Power Voltage (Vmp) :.8V aximum Power Current (Imp) 8.8A Short Circuit Current : (Isc) : 8.78A Operating module temperature : 0 to 85 c Power output tolerance : not more than +/- 5 Junction box production : IP65 Connectors : C4 Cable : 4mm, length 00mm aximum system voltage : 000 vdc Warranty : Nominal power output 90% for 0 years, 80% for 5years Standards and certificates : IEC 65, IEC67 Inverter & charger Specifications Power watts : 00 watts Inverter Voltage : 4V AC Input voltage : 0V AC output voltage : 0V Frequency : 50Hz Output wave : pure sine wave QYT 6 UNIT TOTAL Brief Description of Related Services

3 3 4 Inverter Type: Transformer type Cooling method : Air Cooling, smart speed fan Surge : Times normal capacity Protection: - Overload protection - Short circuit protection - Low battery protection Led indicator - Inverter status led indicator - Battery level led indicator Battery Specifications Battery Type : AG, opzv, Container & Cover : Acid-resistant ABS resin Option : UL94-V0 = ABS Cycle number: Not less than % DOD. Battery voltage : V Capacity : 00A Cell Number : 6 Cells Charge current : 40A or more Warranty : Not less than months anufacture date : Not more than 6 months PPT Solar Charger Controller PV Power : Not less than 4 v Battery voltage : 4v aximum current : 60A Charger controller type : ( PPT ) aximum Power Point Tracking PPT open circuit voltage : Vdc Display : LCD screen LCD screen parameter Heat Sink Cover Volt, current, watts input and output PPT and Efficiency : more than 98 % Charge method : three or five stages

4 Operations temperature range: Not less than -5 ~ 55 Degree Celsius. ounting Structure for Solar Panel Fixed ounting Structure for Solar Panel Rooftop angel iron steel 5*mm coating paint resistant of corrosion for 6 panels 55watts (Total 5 watts) Battery rack Battery metal rack for battery 00a angle Iron steel 5*.5mm, with coating paint resistant of corrosion. Flex cable 4*0mm Cu/PVC, 0/500v (By eter) for PV panel Flex cable *6 mm Cu/PVC, 0/500v (By eter) Output form inverter Flex cable 35mm Cu/PVC (By eter) for battery to inverter PVC pipes with connections 0.5 inch (by meters) DC Enclosures 63 A fuse AC-Dc or 5A CB, AC, pole breaker with plastic enclosure for PV. 6A CB, AC, pole with plastic enclosure 4 lines for inverter output. 63A - AC manual change over switch CB size Earth system, copper rod 6mm with *6mm (5 meter) copper wire, carbon and salt. 0v, 50hz, 60-70watts Stand fan for cooling battery and inverter Other Related Costs Delivery to HODEIDA GRAND TOTAL 40 4

5 NO LOT (B) : COPLETE SOLAR SYSTE for 500w to HAJJA governorate as per the below detail specification for each system. Detail specification for one system for 500w Solar Systems Technical Specification Technical Specification Photovoltaic odule Specification odule Type : Polycrystalline Power Output : 55 watts Cell number 60 cells odule Efficiency : Not less then 5 % Open Circuit Voltage (Voc) : 37.6 V aximum Power Voltage (Vmp) :.8V aximum Power Current (Imp) 8.8A Short Circuit Current : (Isc) : 8.78A Operating module temperature : 0 to 85 c Power output tolerance : not more than +/- 5 Junction box production : IP65 Connectors : C4 Cable : 4mm, length 00mm aximum system voltage : 000 vdc Warranty : Nominal power output 90% for 0 years, 80% for 5years Standards and certificates : IEC 65, IEC67 Inverter & charger Specifications Power watts : 00 watts Inverter Voltage : 4V AC Input voltage : 0V AC output voltage : 0V Frequency : 50Hz Output wave : pure sine wave Inverter Type: Transformer type Cooling method : Air Cooling, smart speed fan Surge : Times normal capacity Protection: QYT 6 UNIT TOTAL Brief Description of Related Services

6 Overload protection - Short circuit protection - Low battery protection Led indicator - Inverter status led indicator - Battery level led indicator Battery Specifications Battery Type : AG, opzv, Container & Cover : Acid-resistant ABS resin Option : UL94-V0 = ABS Cycle number: Not less than % DOD. Battery voltage : V Capacity : 00A Cell Number : 6 Cells Charge current : 40A or more Warranty : Not less than months anufacture date : Not more than 6 months PPT Solar Charger Controller PV Power : Not less than 4 v Battery voltage : 4v aximum current : 60A Charger controller type : ( PPT ) aximum Power Point Tracking PPT open circuit voltage : Vdc Display : LCD screen LCD screen parameter Heat Sink Cover Volt, current, watts input and output PPT Efficiency : more than 98 % Charge method : three or five stages Operations temperature range: Not less than -5 ~ 55 Degree Celsius. ounting Structure for Solar Panel

7 Fixed ounting Structure for Solar Panel Rooftop angel iron steel 5*mm coating paint resistant of corrosion for 6 panels 55watts (Total 5 watts) Battery rack Battery metal rack for battery 00a angle Iron steel 5*.5mm, with coating paint resistant of corrosion. Flex cable 4*0mm Cu/PVC, 0/500v (By eter) for PV panel Flex cable *6 mm Cu/PVC, 0/500v (By eter) Output form inverter Flex cable 35mm Cu/PVC (By eter) for battery to inverter PVC pipes with connections 0.5 inch (by meters) DC Enclosures 63 A fuse AC-Dc or 5A CB, AC, pole breaker with plastic enclosure for PV. 6A CB, AC, pole with plastic enclosure 4 lines for inverter output. 63A - AC manual change over switch CB size Earth system, copper rod 6mm with *6mm (5 meter) copper wire, carbon and salt. 0v, 50hz, 60-70watts Stand fan for cooling battery and inverter Other Related Costs Delivery to HAJJA GRAND TOTAL 40 4

8 NO LOT (A) : 8 COPLETE SOLAR SYSTE for 500w to ABYAN governorate as per the below detail specification for each system. Detail specification for one system for 500w Solar Systems Technical Specification Technical Specification Photovoltaic odule Specification odule Type : Polycrystalline Power Output : 55 watts Cell number 60 cells odule Efficiency : Not less then 5 % Open Circuit Voltage (Voc) : 37.6 V aximum Power Voltage (Vmp) :.8V aximum Power Current (Imp) 8.8A Short Circuit Current : (Isc) : 8.78A Operating module temperature : 0 to 85 c Power output tolerance : not more than +/- 5 Junction box production : IP65 Connectors : C4 Cable : 4mm, length 00mm aximum system voltage : 000 vdc Warranty : Nominal power output 90% for 0 years, 80% for 5years Standards and certificates : IEC 65, IEC67 Inverter & charger Specifications Power watts : 00 watts Inverter Voltage : 4V AC Input voltage : 0V AC output voltage : 0V Frequency : 50Hz Output wave : pure sine wave Inverter Type: Transformer type Cooling method : Air Cooling, smart speed fan Surge : Times normal capacity Protection: QYT 6 UNIT TOTAL Brief Description of Related Services

9 Overload protection - Short circuit protection - Low battery protection Led indicator - Inverter status led indicator - Battery level led indicator Battery Specifications Battery Type : AG, opzv, Container & Cover : Acid-resistant ABS resin Option : UL94-V0 = ABS Cycle number: Not less than % DOD. Battery voltage : V Capacity : 00A Cell Number : 6 Cells Charge current : 40A or more Warranty : Not less than months anufacture date : Not more than 6 months PPT Solar Charger Controller PV Power : Not less than 4 v Battery voltage : 4v aximum current : 60A Charger controller type : ( PPT ) aximum Power Point Tracking PPT open circuit voltage : Vdc Display : LCD screen LCD screen parameter Heat Sink Cover Volt, current, watts input and output PPT Efficiency : more than 98 % Charge method : three or five stages Operations temperature range: Not less than -5 ~ 55 Degree Celsius. ounting Structure for Solar Panel

10 Fixed ounting Structure for Solar Panel Rooftop angel iron steel 5*mm coating paint resistant of corrosion for 6 panels 55watts (Total 5 watts) Battery rack Battery metal rack for battery 00a angle Iron steel 5*.5mm, with coating paint resistant of corrosion. Flex cable 4*0mm Cu/PVC, 0/500v (By eter) for PV panel Flex cable *6 mm Cu/PVC, 0/500v (By eter) Output form inverter Flex cable 35mm Cu/PVC (By eter) for battery to inverter PVC pipes with connections 0.5 inch (by meters) DC Enclosures 63 A fuse AC-Dc or 5A CB, AC, pole breaker with plastic enclosure for PV. 6A CB, AC, pole with plastic enclosure 4 lines for inverter output. 63A - AC manual change over switch CB size Earth system, copper rod 6mm with *6mm (5 meter) copper wire, carbon and salt. 0v, 50hz, 60-70watts Stand fan for cooling battery and inverter Other Related Costs Delivery to ABYAN GRAND TOTAL 40 4

11 NO LOT (B) : 8 COPLETE SOLAR SYSTE for 500w to LAHJ governorate as per the below detail specification for each system. Detail specification for one system for 500w Solar Systems Technical Specification Technical Specification Photovoltaic odule Specification odule Type : Polycrystalline Power Output : 55 watts Cell number 60 cells odule Efficiency : Not less then 5 % Open Circuit Voltage (Voc) : 37.6 V aximum Power Voltage (Vmp) :.8V aximum Power Current (Imp) 8.8A Short Circuit Current : (Isc) : 8.78A Operating module temperature : 0 to 85 c Power output tolerance : not more than +/- 5 Junction box production : IP65 Connectors : C4 Cable : 4mm, length 00mm aximum system voltage : 000 vdc Warranty : Nominal power output 90% for 0 years, 80% for 5years Standards and certificates : IEC 65, IEC67 Inverter & charger Specifications Power watts : 00 watts Inverter Voltage : 4V AC Input voltage : 0V AC output voltage : 0V Frequency : 50Hz Output wave : pure sine wave Inverter Type: Transformer type Cooling method : Air Cooling, smart speed fan Surge : Times normal capacity Protection: QYT 6 UNIT TOTAL Brief Description of Related Services

12 Overload protection - Short circuit protection - Low battery protection Led indicator - Inverter status led indicator - Battery level led indicator Battery Specifications Battery Type : AG, opzv, Container & Cover : Acid-resistant ABS resin Option : UL94-V0 = ABS Cycle number: Not less than % DOD. Battery voltage : V Capacity : 00A Cell Number : 6 Cells Charge current : 40A or more Warranty : Not less than months anufacture date : Not more than 6 months PPT Solar Charger Controller PV Power : Not less than 4 v Battery voltage : 4v aximum current : 60A Charger controller type : ( PPT ) aximum Power Point Tracking PPT open circuit voltage : Vdc Display : LCD screen LCD screen parameter Heat Sink Cover Volt, current, watts input and output PPT Efficiency : more than 98 % Charge method : three or five stages Operations temperature range: Not less than -5 ~ 55 Degree Celsius. ounting Structure for Solar Panel

13 Fixed ounting Structure for Solar Panel Rooftop angel iron steel 5*mm coating paint resistant of corrosion for 6 panels 55watts (Total 5 watts) Battery rack Battery metal rack for battery 00a angle Iron steel 5*.5mm, with coating paint resistant of corrosion. Flex cable 4*0mm Cu/PVC, 0/500v (By eter) for PV panel Flex cable *6 mm Cu/PVC, 0/500v (By eter) Output form inverter Flex cable 35mm Cu/PVC (By eter) for battery to inverter PVC pipes with connections 0.5 inch (by meters) DC Enclosures 63 A fuse AC-Dc or 5A CB, AC, pole breaker with plastic enclosure for PV. 6A CB, AC, pole with plastic enclosure 4 lines for inverter output. 63A - AC manual change over switch CB size Earth system, copper rod 6mm with *6mm (5 meter) copper wire, carbon and salt. 0v, 50hz, 60-70watts Stand fan for cooling battery and inverter Other Related Costs Delivery to LAHJ GRAND TOTAL 40 4