PRODUCT SPECIFICATION

Transcription

1 PRODUCT SPECIFICATION Buyer Name Buyer spart No. Buyer s Approval & Signatures /Spec No. Product Description /Part No. /Date /Designed by Coin type vibration motor /Checked by /Approved by / WANG ZX / FU MZ / SHAO JS /Address: /Tel: / Fax: / cherry_xie@kotl.com.cn /Website:

2 / Contents 1. /General Scope of Application 1/8 2. /Operating Conditions 1/8 3. /Conditions of Measurement 1/8 4. /Electrical Characteristics 1/8 5. /Mechanical Characteristics 2/8 6. /Reliability Test 2/8 7. /Requirements after Reliability Tests 4/8 8. /Cautions for Use 5/8 9. /Packaging Description 6/8 10. /Outline Drawings 7/8 11. /Records of Revisions 8/8

3 /Specification 1. /General Scope of Application C1034B006F. /No KOTL-009 1/8 This specification applies to coin type permanent-magnetic motors DC model C1034B006F. 2. /Operating Conditions /Item Rated voltage Operating voltage Rotation Operating environment Storage environment /Specifications 3.0V DC 2.7~3.3V DC CW (clockwise) or CCW (counter clockwise) -2060, /Ordinary Humidity:65±20%RH -3070, /Ordinary Humidity:65±20%RH 3. /Conditions of Measurement /Item Temperature Humidity Power supply /Specification 25±3 65±20% RH 3.0V Constant Power supply 3.0V DC. 4. /Electrical Characteristics /Item Rated speed Rated current Starting current Starting voltage Insulation resistance Terminal resistance /Specification 80mA Max 120mA Max 2.3V DC Max 10MΩ Min /Condition At rated voltage. Motor is rotating at minimum starting voltage. 100V At DC 100V between lead wire and case. 25 At 25

4 /Specification 5. /Mechanical Characteristics /No KOTL-009 2/8 /Item 5-1 Bracket Deflection strength Mechanical noise At rated voltage. /Specification 9.8N 9.8N or more. 50. A 50dB (A) Max. 28dB. A. Back ground noise 28dB (A) Max. 5-2 Motor Test block Foam 6. / Reliability Tests /Item 6-1 Lifetime /Specification / Rated voltage: 3.0V DC / Test mode: 2s On, 2s Off, as one cycle. / Test cycle: 50,000 cycles /Judgment 7-1 After the test, motors shall be approved as specified in item Low temperature exposure High temperature Exposure /Temperature: 30 /Time: 96h /Temperature: +70 /Time: 96h 4h 7-2 After 4 hours exposure in ordinary temperature and humidity, motors shall be approved as specified in item h 7-2 After 4 hours exposure in ordinary temperature and humidity, motors shall be approved as specified in item 7-2.

5 /Specification /Item /Specification /Temperature: +40 /Humidity: 95%RH High / Exposure time: 96h Humidity / No condensation of moisture exposure Vibration /Displacement: 1.5mm (p-p) /Frequency: 10~55Hz /Acceleration: 22m/s 2 /Period: 10 (10~55~10Hz)/ /No KOTL-009 3/8 /Judgment 4h 7-2 After 4 hours exposure in ordinary temperature and humidity, Motors shall be approved as specified in item 7-2. test motors shall be 10 Minutes log sweep (10~55~10Hz) approved as specified /Condition: 3 10 in item 7-2. Samples shall be applied for a period of 10 minutes in three axial directions. /Test mode: 100 Set the motor to a fixture of approx. 100g (include the motor) and drop it onto the concrete floor. /Height: 1.5m Free fall /Direction: ±x, ±y, ±z Thermal shock /Number of times: 3 / Each 3 times / Test mode: 1 hour at -40, 1 hour at +85, as one cycle. Transfer time between extreme temperatures 5 /5min /Test cycle: 15 cycles Temp. T ( C) +85 1h Transfer < 5min 1h - 40 C Transfer < 5min End Time 7-2 After the 7-2 After the test motors shall be approved as specified in item h, 7-2 After 4 hours exposure in ordinary temperature and humidity, Motors shall be approved as specified in item 7-2.

6 /Specificationn 7. / Judgments after Reliability Tests /No KOTL-009 4/8 /Item A Table A B Table B Requirements 1) /Rated speed: -30% +50%/ No lower than -30% of initial data; No more than +50% of initial data. 2) /Rated current: -30% +50% No lower than -30% of initial data; No more than +50% of initial data. 3) /Terminal resistance: ±15% No more than +15% of initial data; No less than -15% of initial data. 4) /Starting voltage: 2.5V 2.5V DC Max 5) /Insulation resistance: 10Ω/ 10Ω Min 1) /Rated speed: 2) /Rated current: ±20% No more than +20% of initial data; No less than -20% of initial data. ±20% No more than +20% of initial data; No less than -20% of initial data. 3) /Starting voltage: 2.5V 2.5V DC Max 4) /Terminal resistance: ±15% No more than +15% of initial data; No less than -15% of initial data.

7 /Specification 8. / Cautions for Use /No KOTL-009 5/8 8-1, Unless it is used in accordance with the specifications, the performance and life may be considerably reduced. Due attention should be paid to voltage and range for use. 8-2, 1. 2., H 2 SSO 2 NO 2 Cl 2 3. Advice uses this motor within 6 months as avoiding as possible. Avoid use or save the motor in the following environment. 1. High temperature and high humidity area 2. Corrosive gas such as H 2 S, SO 2, NO 2, Cl Dusty area. 8-3 Due attention must be paid to the handling and working environments because such objects as iron powder if attracted by the motor magnet, will cause noise, characteristic deterioration thus reducing the reliability. 8-4 Please confirm enough no problems of standards and laws and ordinances on your cellular phone. 8-5 To handle the motor, hold the motor case softly. 8-6 Rust of plate (steel) and similar edge should be OK.

8 9. /PACKING

9 10. / OUTLINE DRAWINGS

10 /Specification 11. / Records of Revision /No KOTL-009 8/8 Rev. No. Rev. Date Page No. Revised Item Reason / / Release for Production