EENERGY EFFICIENCY. German-Japanese Energy Symposium Lithium-Ion-Technology in mobile und stationary applications. February 10 th, 2011

Size: px

Start display at page:

Download "EENERGY EFFICIENCY. German-Japanese Energy Symposium Lithium-Ion-Technology in mobile und stationary applications. February 10 th, 2011"

Jonathan Preston
5 years ago
Views:

February 10 th, 2011 Carsten Kolligs Evonik

1 German-Japanese Energy Symposium 2011 Lithium-Ion-Technology in mobile und stationary applications EENERGY EFFICIENCY CO EENERGY EFFICIENCY CLIMATE PROTECTION2 February 10 th, 2011 Carsten Kolligs Evonik Degussa GmbH Creavis Technology & Innovation Version 2.0

5 l Diesel ca. 10 kwh 1.0 l Diesel ca. 25 kwh 2.

2 With Lithium-Ion-Technology cruising ranges of greater than 150 km are first time possible Ranges in km with a 125 kg battery Lead Acid Nickel-Metal-Hydride Lithium-Ion ca. 5 kwh 0.5 l Diesel ca. 10 kwh 1.0 l Diesel ca. 25 kwh 2.5 l Diesel Lead Acid 33 km Nickel-Metal-Hydride 69 km Lithium-Ion 167 km The energy input per 100 km relates to 1.5 l Diesel, Li-Tec page 2

3 At the charging process Lithium-Ions are stored into the graphite grid Charging of battery cell Cathode Anode Oxygen Electrones e - Separator Metal Oxide (NMC) Lithium Li + Li + Graphite grid, Li-Tec page 3

The pairs of electrodes determine the possible cell voltage LITARION Electrodes Type / Specifications Cathode Anode LITARION AC 1411 NMC Hard Carbon LITARION AC 3521 NMC Graphite Capacity 1.

4 The pairs of electrodes determine the possible cell voltage LITARION Electrodes Type / Specifications Cathode Anode LITARION AC 1411 NMC Hard Carbon LITARION AC 3521 NMC Graphite Capacity 1.4 mah/cm² 3.5 mah/cm² Current stability/c- Ratio > 20C > 5C Cycle stability > 5,000 Cycles > 3,000 Cycles Typical applications Premium High Power Premium High Energy / Medium Power NMC : LiNi 1/3 Mn 1/3 Co 1/3 O 2, Li-Tec page 4

SEPARION is the technological pacer for large-format

coating (alumina, zirconia, silica) Polymeric

SEPARION flexible ceramic battery separator Source:

5 SEPARION is the technological pacer for large-format cells Composition of separator Continuous ceramic coating (alumina, zirconia, silica) Polymeric non-woven support (polyethylene terephthalate) plus SEPARION flexible ceramic battery separator Source: Science-to-Business Center Eco2 (February 2011), Li-Tec page 5

Lithium-Ion-Technology allows for direct electricity storage Characteristics of

density High cycle stability Short response time High efficiency (> 95%) Broad load

discharge (< 1 % per month) High cell voltage (3.

6 Lithium-Ion-Technology allows for direct electricity storage Characteristics of Lithium-Ion-Technology Technology advantage Cell components High power / energy density High cycle stability Short response time High efficiency (> 95%) Broad load range without battery damage High safety due to ceramic separator - SEPARION Low self discharge (< 1 % per month) High cell voltage (3.6 V) Moderate temperature window SEPARION ceramic separator LITARION C Ready to use cathodes LITARION A Ready to use anodes, Li-Tec page 6

7 Besides deployment in mobile applications also stationary ones have great potential From E-mobility to stationary applications Lithium-Ion-Technology E-mobility, Li-Tec Stationary applications page 7

8 Trends in electricity supply demand for measures in the electrical network Expansion of renewable energies Removal of conventional energy generation Load management Network expansion Decentralized energy generation Increasing energy prices E-mobility North-Southdecline of wind Trigeneration More competition? Smart Grids Virtual combined power plants Storages!? Trigeneration: Combined-heat-cold-power-plants page 8

optimization power supply Use of excess current especially from RE (longer duration) Keeping RE-prognoses Balancing

9 Manifold fields of applications exist for stationary storages result Areas of applications UPS Control power Increase of grid quality / grid stability Grid relief, switching / avoiding network extension Peak shifting, peak shaving, optimization power supply Use of excess current especially from RE (longer duration) Keeping RE-prognoses Balancing fluctuating resources (base-load-capabilities) Allocation of reactive power UPS: Uninterruptible power supply, RE : Renewable energies page 9

10 Future mobility is indicated by electrification of the drive chain Electrification of drive chain Drive system Combustion engine Hybrid Electrical driving (emission free) Stop/ Start Mild Full Plug-in parallel Plug-in serial Fuel cell Battery 100 % 0 % Degree of electrification, Li-Tec page 10

11 Mobile and stationary applications have common ground but also distinctions Differences E-mobility Storage capacities and power vary by order of magnitude of one Power and energy density leading More intense changing boundaries ( e. g. temperature) Shock Crash Safety Added value higher (?) Stationary applications Storage capacities and power vary by order of magnitude of four Low energy prices low added value (per cycle) High number of possible applications and combinations ( however different and changing demands) LIT: Lithium-Ion-Technology, Li-Tec page 11

12 Number of possible cycles decides on total range Cycles of different storage technologies 100 Capacity [%] 80 Lead NiMH Standard Lithium-Ion Premium Lithium-Ion 500 Cycles Lead Technology / Cycles [-] 800 Cycles NiMH 1500 Cycles Standard Lithium-Ion > 2500 Cycles Premium Lithium-Ion 50, , , , , , ,000 Total range during lifetime [km], Li-Tec page 12

13 Cycle lifetime of Lithium-Ion-Cells are strongly dependent on load profile Cycle lifetime of a 40 Ah cell at 100% DoD Capacity [%] C/3C (120 A) 2C/2C (80 A) 1C/1C (40 A) EoL Cycles [-] C-Ratio ( Power/Capacity ) Cycles DoD Cycles (also total energy conversion!) EoL: End of Life DoD: Depth of Discharge, Li-Tec page 13

Operation and particular application determine the specific costs not only investment Example Specific costs of throughput energy (without capital costs) Investment: 1,000 /kwh installed Throughput

14 Operation and particular application determine the specific costs not only investment Example Specific costs of throughput energy (without capital costs) Investment: 1,000 /kwh installed Throughput energy: 4,000 kwh throughput /kwh installed Investment: 400 /kwh installed Throughput energy:40,000 kwh throughput /kwh installed Specific costs of retrieved power (without capital costs) C-Ratio: 1 h -1 Investment: 1,000 /kwh installed C-Ratio: 20 h -1 Investment: 400 /kwh installed 25 ct/kwh throughput 1 ct/kwh throughput 1,000 /kw 20 /kw page 14

15 LESSY (Lithium-Electricity-Storage-System) provides ancillary services Project overview Goal: Proof of technical and economical feasibility of large-format stationary electricity storages on the basis of Lithium-Ion-Technology at the example of the application Primary Control Power Power Plant Fenne (Evonik Power Saar) Duration: Control power: Storage capacity: 3 years +/- 1 MW 700 kwh Project volume: 4.91 Mil. page 15

Control power supports the stability of the electrical network frequency Explanation of provision of control power P/P N [%] Displace principle of control power provision f Grid [Hz] 50,050 100 %

16 Control power supports the stability of the electrical network frequency Explanation of provision of control power P/P N [%] Displace principle of control power provision f Grid [Hz] 50, % Primary control Secondary control Minute reserve 50, s 5 min 15 min t 49, t [h] Requirement of control power: High load gradients Frequent change between power acceptance and discharge Quick response High availability page 16

17 The large format storage shows compact design Design of LESSY storage Periphery room Battery room Block (28 cells incl. BMS), Digatron Cell (3.6 V, 40 Ah) page 17

Besides primary control power also other ancillary services will be tested Focus during test operation Primary control 380 kv Transmisson grid Stand alone In combination with power plant USP

18 Besides primary control power also other ancillary services will be tested Focus during test operation Primary control 380 kv Transmisson grid Stand alone In combination with power plant USP Realization of black start capability Compensation of reactive power G MKV Fenne 110 kv G HKV Fenne G GT Fenne 65 kv 10kV aux. power GT : Gas Turbine MKV : Modellkraftwerk Völklingen, HKV : Heizkraftwerk Völklingen page 18

19 Statistic analyses of load profile provide the design basis Examination of load profile Number [-] a) stationary P/P N fnetz [Hz] 50, mhz -10 mhz10 mhz 200 mhz f - 50 Hz DoD [%] 50,000 49, t [h] b) dynamic f P N Number [-] Frequency data 30 s t Transmission Code C-Ratio [1/h] Statistic analyses Operation at provision of primary control power demands for detailed comprehension of ageing procedures page 19

Power electronics adjustment of existing technologies 100 cells Examination of cell deterioration and

20 Tasks and challenges resulting from the size of the battery storage system Main project tasks Availability / reliability Battery management system (BMS) some cells Battery architecture Safety concept Grid connection Power electronics adjustment of existing technologies 100 cells Examination of cell deterioration and optimized layout for real world conditions Charging time velocity and dynamics of battery storage system 5,000 cells page 20

(especially at high power over longer time) Development business models Adjust and create formalities and

21 Besides only technical requirements also regulatory questions have to be solved Development focus Optimization of low and part load operation SoC-/SoH-control, balancing between cells, blocks, strings Thermal management (especially at high power over longer time) Development business models Adjust and create formalities and conditions for provision of ancillary services Alternative applications requirements SoC: State of Charge SoH: State of Health page 21

22 Complementary technologies must be understood and combined to system solutions Alternative and complementary technologies Lead acid / gel batteries Sodium sulfur batteries Redox-Flow-Batteries NiMH-Batteries Lithium- Ion- Technology Alternative Technology?? Application Supercaps Fly wheel High Power Lithium-Ion-Batteries Hydrogen Compressed air energy storage Lithium- Ion- Technology Complementary Technology! Application page 22

Mobile and stationary storages can provide a contribution to Smart Grid Preconditions and measures Stationary Mobile Integration of stationary storages Adopt market requirements Development of

23 Mobile and stationary storages can provide a contribution to Smart Grid Preconditions and measures Stationary Mobile Integration of stationary storages Adopt market requirements Development of storage solutions Provision of charging infrastructure Grid integration of available EV Setup of ICT structures Development of V2G concepts ICT : Information-Communication-Technologies EV : Electrical vehicles V2G : Vehicle to Grid page 23

Lithium-Ion-Technology as driver of E-mobility and stationary applications Conclusions Lithium-Ion-Technology provides due to its characteristics acceptable ranges with EV Mobile applications

24 Lithium-Ion-Technology as driver of E-mobility and stationary applications Conclusions Lithium-Ion-Technology provides due to its characteristics acceptable ranges with EV Mobile applications establish basis for break through of storage applications Mass market accounts for reduction of cell prices Stationary storages will already provide at short notice ancillary services and a contribution to the integration of renewable energies Mobile and stationary storages will be needed for the realization of decentralized, intelligent networks page 24

25 page 25

E-Highway2050 WP3 workshop April 15 th, 2014 Brussels. Battery Storage Technology Assessment Lukas Sigrist, Comillas, Eric Peirano, TECHNOFI

E-Highway2050 WP3 workshop April 15 th, 2014 Brussels Battery Storage Technology Assessment Lukas Sigrist, Comillas, Eric Peirano, TECHNOFI Content Introduction Methodology Results Concluding remarks WP3