Issued: February 27, 2017 Effective: March 29, 2017 Issued by: Darrin R. Ives, Vice President 1200 Main, Kansas City, MO 64105

Transcription

1 KCP&L GREATER MISSOURI OPERATIONS COMPANY P.S.C. MO. No. 1 th Revised Sheet No. 117 Canceling P.S.C. MO. No. 1 th Revised Sheet No. 117 NET METERING INTERCONNECTION APPLICATION AGREEMENT ELECTRIC For Missouri Retail Service Area INTERCONNECTION APPLICATION/AGREEMENT FOR NET METERING SYSTEMS WITH CAPACITY OF ONE HUNDRED KILOWATTS (100 kw) OR LESS KCP&L PO Box 1879 Kansas City, MO Attn: Solar Rebates/Net Metering For Customers Applying for Interconnection: If you are interested in applying for interconnection to GMO s electrical system, you should first contact GMO and ask for information related to interconnection of parallel generation equipment to GMO s system and you should understand this information before proceeding with this Application. If you wish to apply for interconnection to GMO s electrical system, please complete sections A, B, C, and D and attach the plans and specifications, including, but not limited to, describing the net metering, parallel generation, and interconnection facilities (hereinafter collectively referred to as the Customer-Generator s System ) and submit them to GMO at the address above. GMO will provide notice of approval or denial within thirty (0) days of receipt by GMO for Customer-Generators of ten kilowatts (10 kw) or less and within ninety (90) days of receipt by GMO for Customer-Generators of greater than ten kilowatts (10 kw). If this Application is denied, you will be provided with the reason(s) for the denial. If this Application is approved and signed by both you and GMO, it shall become a binding contract and shall govern your relationship with GMO. For Customers Who Have Received Approval of Customer-Generator System Plans and Specifications: After receiving approval of your Application, it will be necessary to construct the Customer-Generator System in compliance with the plans and specifications described in the Application, sign and complete sections E and F of this Application, and forward this Application to GMO for review and completion of section G at the address above. Prior to the interconnection of the qualified generation unit to GMO s system, the Customer-Generator will furnish GMO a certification from a qualified professional electrician or engineer that the installation meets the plans and specification described in the application. If a local Authority Having Jurisdiction (AHJ) requires permits or certifications for construction or operation of the qualified generation unit, a Customer-Generator must show the permit number and approval certification to KCP&L prior to interconnection. If the application for interconnection is approved by GMO and the Customer-Generator does not complete the interconnection within one (1) year after receipt of notice of the approval, the approval shall expire and the Customer-Generator shall be responsible for filing a new application. FILED Missouri Public Service Commission JE Issued: February 7, 017 Effective: March 9, 017 Issued by: Darrin R. Ives, Vice President 100 Main, Kansas City, MO 10

2 KCP&L GREATER MISSOURI OPERATIONS COMPANY P.S.C. MO. No. 1 th Revised Sheet No. 118 Canceling P.S.C. MO. No. 1 th Revised Sheet No. 118 NET METERING INTERCONNECTION APPLICATION AGREEMENT ELECTRIC For Missouri Retail Service Area For Customers Who Have Received Approval of Customer-Generator System Plans and Specifications (continued) Within 1 days of when the Customer-Generator completes submission of all required post construction documentation, including sections E and F, other supporting documentation and local AHJ inspection approval (if applicable) to the electric utility, the electric utility will make any inspection of the Customer-Generator s interconnection equipment or system it deems necessary and notify the Customer- Generator: 1. That the net meter has been set and parallel operation by Customer Generator is permitted; or,. That the inspection identified no deficiencies and the net meter installation is pending; or,. That the inspection identified no deficiencies and the timeframe anticipated for the electric utility to complete all required system or service upgrades and install the meter; or,. Of all deficiencies identified during the inspection that need to be corrected by the Customer-Generator before parallel operation will be permitted; or,. Of any other issue(s), requirement(s), or condition(s) impacting the installation of the net meter or the parallel operation of the system. For Customers Who Are Installing Solar Systems: Customer-Generators who are Missouri electric utility retail account holders will receive a solar rebate, if available, based on the capacity stated in the application, or the installed capacity of the Customer-Generator System if it is lower, if the following requirements are met: a. KCP&L must have confirmed the Customer-Generator s system is operational; and, b. Sections H and I of this Application must be completed. The amount of the rebate will be based on the system capacity measured in direct current. The rebate will be based on the schedule below up to a maximum of,000 watts (kw).. $.00 per watt for systems operational on or before June 0, 01; $1.0 per watt for systems operational between July 1, 01 and June 0, 01; $1.00 per watt for systems operational between July 1, 01 and June 0, 01; $0.0 per watt for systems operational between July 1, 01 and June 0, 019; $0. per watt for systems operational between July 1, 019 and June 0, 00; $0.00 per watt for systems operational after June 0, 00. For Customers Who Are Assuming Ownership or Operational Control of an Existing Customer-Generator System: If no changes are being made to the existing Customer-Generator System, complete sections A, D, and F of this Application/Agreement and forward to GMO at the address above. GMO will review the new Application/Agreement and shall approve such, within fifteen (1) days of receipt by GMO if the new Customer- Generator has satisfactorily completed Application/Agreement, and no changes are being proposed to the existing Customer-Generator System. There are no fees or charges for the Customer-Generator who is assuming ownership or operational control of an existing Customer-Generator System if no modifications are being proposed to that System. FILED Missouri Public Service Commission JE Issued: February 7, 017 Effective: March 9, 017 Issued by: Darrin R. Ives, Vice President 100 Main, Kansas City, MO 10

3 Malta Bend 101 Pine St Everett O'Donnell MO 9 maverickodie@yahoo.com Everett O'Donnell X SMA SB 7.7-1SP-US-0 Exterior West Wall of Home 10' of Meter, with a placard of placement Exterior WEst Wall of Home about 10 ft from the meter on the pole, we will have a placard for placement X 00 0

4 KCP&L GREATER MISSOURI OPERATIONS COMPANY P.S.C. MO. No. 1 nd Revised Sheet No Canceling P.S.C. MO. No. 1 1 st Revised Sheet No NET METERING INTERCONNECTION APPLICATION AGREEMENT ELECTRIC For Missouri Retail Service Area C. Installation Information/Hardware and Installation Compliance Company Installing System: Simple Solar Contact Person of Company Installing System: Cathy Bloss Phone Number: Contractor s License No. (if applicable): Approximate Installation Date: 0/0/018 Mailing Address: 1 N Patterson Ave City: Springfield State: MO Zip Code: 80 Daytime Phone: Fax: Cathy@getsimplesolar.com Person or Agency Who Will Inspect/Certify Installation: Dustin Douglas The Customer-Generator s proposed System hardware complies with all applicable National Electrical Safety Code (NESC), National Electrical Code (NEC), Institute of Electrical and Electronics Engineers (IEEE), and Underwriters Laboratories (UL) requirements for electrical equipment and their installation. As applicable to System type, these requirements include, but are not limited to, UL 170, UL 171 and IEEE 17. The proposed installation complies with all applicable local electrical codes and all reasonable safety requirements of GMO. The proposed System has a lockable, visible AC disconnect device, accessible at all times to GMO personnel and switch is located adjacent to the Customer-Generator s electric service meter (except in cases where GMO has approved an alternate location). The System is only required to include one lockable, visible disconnect device, accessible to GMO. If the interconnection equipment is equipped with a visible, lockable, and accessible disconnect, no redundant device is needed to meet this requirement. The Customer-Generator s proposed System has functioning controls to prevent voltage flicker, DC injection, overvoltage, undervoltage, overfrequency, underfrequency, and overcurrent, and to provide for System synchronization to GMO s electrical system. The proposed System does have an anti-islanding function that prevents the generator from continuing to supply power when GMO s electric system is not energized or operating normally. If the proposed System is designed to provide uninterruptible power to critical loads, either through energy storage or back-up generation, the proposed System includes a parallel blocking scheme for this backup source that prevents any backflow of power to GMO s electrical system when the electrical system is not energized or not operating normally. Printed Name (Installer): Dustin Douglas Signed (Installer): Date: 0/1/018 Dustin Douglas FILED Missouri Public Service Commission JE Issued: February 7, 017 Effective: March 9, 017 Issued by: Darrin R. Ives, Vice President 100 Main, Kansas City, MO 10

5 KCP&L GREATER MISSOURI OPERATIONS COMPANY P.S.C. MO. No. 1 rd Revised Sheet No Canceling P.S.C. MO. No. 1 nd Revised Sheet No NET METERING INTERCONNECTION APPLICATION AGREEMENT ELECTRIC For Missouri Retail Service Area D. Additional Terms and Conditions In addition to abiding by the Company s other applicable rules and regulations, the Customer-Generator understands and agrees to the following specific terms and conditions: 1. Operation/Disconnection If it appears to the Company, at any time, in the reasonable exercise of its judgment, that operation of the Customer-Generator s System is adversely affecting safety, power quality, or reliability of the Company s electrical system, the Company may immediately disconnect and lock-out the Customer- Generator s System from the Company s electrical system. The Customer-Generator shall permit the Company s employees and inspectors reasonable access to inspect, test, and examine the Customer-Generator s System.. Liability Liability insurance is not required for Customer-Generators of ten kilowatts (10 kw) or less. For generators greater that ten kilowatts (10 kw), the Customer-Generator agrees to carry no less than one hundred thousand dollars ($100,000) of liability insurance that provides for coverage of all risk of liability for personal injuries (including death) and damage to property arising out of or caused by the operation of the Customer-Generator s System. Insurance may be in the form of an existing policy or an endorsement on an existing policy. Customer-Generators, including those whose systems are ten kilowatts (10 kw) or less, may have legal liabilities not covered under their existing insurance policy in the event the Customer-Generator s negligence or other wrongful conduct causes personal injury (including death), damage to property, or other actions and claims.. Metering and Distribution Costs A Customer-Generator s facility shall be equipped with sufficient metering equipment that can measure the net amount of electrical energy produced or consumed by the Customer-Generator. If the Customer-Generator s existing meter equipment does not meet these requirements or if it is necessary for GMO to install additional distribution equipment to accommodate the Customer- Generator s facility, the Customer-Generator shall reimburse GMO for the costs to purchase and install the necessary additional equipment. At the request of the Customer-Generator, such costs may be initially paid for by GMO, and any amount up to the total costs and a reasonable interest charge may be recovered from the Customer-Generator over the course of up to twelve (1) billing cycles. Any subsequent meter testing, maintenance, or meter equipment change necessitated by the Customer-Generator shall be paid for by the Customer-Generator.. Ownership of Renewable Energy Credits or Renewable Energy Certificates (RECs) RECs created through the generation of electricity by the Customer-Owner are owned by the Customer-Generator however, if the Customer-Generator receives a solar rebate, the Customer- Generator transfers to GMO all rights, title, and interest in and to the RECs associated with the new or expanded solar electric system that qualified the Customer-Generator for the solar rebate for a period of ten (10) years from the date the electric utility confirms the solar electric system was installed and operational. FILED Missouri Public Service Commission JE Issued: February 7, 017 Effective: March 9, 017 Issued by: Darrin R. Ives, Vice President 100 Main, Kansas City, MO 10

6 KCP&L GREATER MISSOURI OPERATIONS COMPANY P.S.C. MO. No. 1 nd Revised Sheet No Canceling P.S.C. MO. No. 1 1 st Revised Sheet No NET METERING INTERCONNECTION APPLICATION AGREEMENT ELECTRIC For Missouri Retail Service Area D. Additional Terms and Conditions (continued). Energy Pricing and Billing The net electric energy delivered to the Customer-Generator shall be billed in accordance with the Utility s Applicable Rate Schedules. The value of the net electric energy delivered by the Customer- Generator to GMO shall be credited in accordance with the net metering rate schedule(s). The Customer-Generator shall be responsible for all other bill components charged to similarly situated customers. Net electrical energy measurement shall be calculated in the following manner: (a) For a Customer-Generator, a retail electric supplier shall measure the net electrical energy produced or consumed during the billing period in accordance with normal metering practices for customers in the same rate class, either by employing a single, bidirectional meter that measures the amount of electrical energy produced and consumed, or by employing multiple meters that separately measure the Customer-Generator s consumption and production of electricity; (b) If the electricity supplied by the supplier exceeds the electricity generated by the Customer- Generator during a billing period, the Customer-Generator shall be billed for the net electricity supplied by the supplier in accordance with normal practices for customers in the same rate class; (c) If the electricity generated by the Customer-Generator exceeds the electricity supplied by the supplier during a billing period, the Customer-Generator shall be billed for the appropriate customer charges as specified by the applicable Customer-Generator rate schedule for that billing period and shall be credited an amount for the excess kilowatt-hours generated during the billing period at the net metering rate identified in GMO s tariff filed at the Public Service Commission, with this credit applied to the following billing period; and (d) Any credits granted by this subsection shall expire without any compensation at the earlier of either twelve (1) months after their issuance, or when the Customer-Generator disconnects service or terminates the net metering relationship with the supplier.. Terms and Termination Rights This Agreement becomes effective when signed by both the Customer-Generator and GMO, and shall continue in effect until terminated. After fulfillment of any applicable initial tariff or rate schedule term, the Customer-Generator may terminate this Agreement at any time by giving GMO at least thirty (0) days prior written notice. In such event, the Customer-Generator shall, no later than the date of termination of Agreement, completely disconnect the Customer-Generator s System from parallel operation with GMO s system. Either party may terminate this Agreement by giving the other party at least thirty (0) days prior written notice that the other party is in default of any of the terms and conditions of this Agreement, so long as the notice specifies the basis for termination, and there is an opportunity to cure the default. This Agreement may also be terminated at any time by mutual agreement of the Customer-Generator and GMO. This agreement may also be terminated, by approval of the commission, if there is a change in statute that is determined to be applicable to this contract and necessitates its termination. FILED Missouri Public Service Commission JE Issued: February 7, 017 Effective: March 9, 017 Issued by: Darrin R. Ives, Vice President 100 Main, Kansas City, MO 10

7 KCP&L GREATER MISSOURI OPERATIONS COMPANY P.S.C. MO. No. 1 rd Revised Sheet No Canceling P.S.C. MO. No. 1 nd Revised Sheet No NET METERING INTERCONNECTION APPLICATION AGREEMENT ELECTRIC For Missouri Retail Service Area D. Additional Terms and Conditions (continued) 7. Transfer of Ownership If operational control of the Customer-Generator s System transfers to any other party than the Customer-Generator, a new Application/Agreement must be completed by the person or persons taking over operational control of the existing Customer-Generator System. GMO shall be notified no less than thirty (0) days before the Customer-Generator anticipates transfer of operational control of the Customer-Generator s System. The person or persons taking over operational control of Customer-Generator s System must file a new Application/Agreement, and must receive authorization from GMO, before the existing Customer-Generator System can remain interconnected with GMO s electrical system. The new Application/Agreement will only need to be completed to the extent necessary to affirm that the new person or persons having operational control of the existing Customer-Generator System completely understand the provisions of this Application/Agreement and agree to them. If no changes are being made to the Customer-Generator s System, completing sections A, D, and F of this Application/Agreement will satisfy this requirement. If no changes are being proposed to the Customer-Generator System, GMO will assess no charges or fees for this transfer. GMO will review the new Application/Agreement and shall approve such, within fifteen (1) days if the new Customer-Generator has satisfactorily completed the Application/Agreement, and no changes are being proposed to the existing Customer-Generator System. GMO will then complete section G and forward a copy of the completed Application/Agreement back to the new Customer- Generator, thereby notifying the new Customer-Generator that the new Customer-Generator is authorized to operate the existing Customer-Generator System in parallel with GMO s electrical system. If any changes are planned to be made to the existing Customer-Generator System that in any way may degrade or significantly alter that System s output characteristics, then the Customer- Generator shall submit to GMO a new Application/Agreement for the entire Customer-Generator System and all portions of the Application/Agreement must be completed. 8. Dispute Resolution If any disagreements between the Customer-Generator and GMO arise that cannot be resolved through normal negotiations between them, the disagreements may be brought to the Missouri Public Service Commission by either party, through an informal or formal complaint. Procedures for filing and processing these complaints are described in CSR The complaint procedures described in CSR apply only to retail electric power suppliers to the extent that they are regulated by the Missouri Public Service Commission. FILED Missouri Public Service Commission JE Issued: February 7, 017 Effective: March 9, 017 Issued by: Darrin R. Ives, Vice President 100 Main, Kansas City, MO 10

8

9 9 Jinko JKM9P X X

10 KCP&L GREATER MISSOURI OPERATIONS COMPANY P.S.C. MO. No. 1 rd Revised Sheet No Canceling P.S.C. MO. No. 1 nd Revised Sheet No NET METERING INTERCONNECTION APPLICATION AGREEMENT ELECTRIC For Missouri Retail Service Area H. Solar System Data (For Solar Installations only) (continued) Solar system must be permanently installed on the applicant s premises for a valid application Required documents to receive solar rebate to be attached OR provided before GMO authorizes the rebate payment: Copies of detail receipts/invoices with purchase date circled Copies of detail spec sheets on each component Copies of proof of warranty sheet (minimum of 10 year warranty) Photo(s) of completed system Completed Taxpayer Information Form Customer Affidavit I. Solar Rebate Declaration (For Solar Installations only) I understand that the complete terms and conditions of the solar rebate program are included in GMO s Rules and Regulations, Section 9.18 Solar Photovoltaic Rebate Program. I understand that this program has a limited budget, and that application will be accepted on a first-come, first-served basis, while funds are available. It is possible that I may be notified I have been placed on a waiting list for the next year s rebate program if funds run out for the current year. This program may be modified or discontinued at any time without notice from GMO. I understand that the solar system must be permanently installed and remain in place on premises for a minimum of 10 years and the system shall be situated in a location where a minimum of eighty-five percent (8%) of the solar resource is available to the solar system. I understand the equipment must be new when installed, commercially available, and carry a minimum 10 year warranty. I understand a rebate may be available from KCP&L in the amount of: $.00 per watt for systems operational on or before June 0, 01; $1.0 per watt for systems operational between July 1, 01 and June 0, 01; $1.00 per watt for systems operational between July 1, 01 and June 0, 01; $0.0 per watt for systems operational between July 1, 01 and June 0, 019; $0. per watt for systems operational between July 1, 019 and June 0, 00; $0.00 per watt for systems operational after June 0, 00. I understand an electric utility may, through its tariff, require applications for solar rebates to be submitted up to one hundred eighty-two (18) days prior to the applicable June 0 operational date for the solar rebate. I understand that a maximum of kilowatts of new or expanded system capacity will be eligible for a rebate. FILED Missouri Public Service Commission JE Issued: February 7, 017 Effective: March 9, 017 Issued by: Darrin R. Ives, Vice President 100 Main, Kansas City, MO 10

11 PINE ST 1 A B GENERAL NOTES PROJECT NOTES: 1.1. THIS PHOTOVOLTAIC (PV) SYSTEM SHALL COMPLY WITH THE NATIONAL ELECTRIC CODE (NEC) ARTICLE 90, ALL MANUFACTURERS S LISTING AND INSTALLATION INSTRUCTIONS, AND THE RELEVANT CODES AS SPECIFIED BY THE AUTHORITY HAVING JURISDICTION S (AHJ) APPLICABLE CODES GROUND FAULT DETECTION AND INTERRUPTION (GFDI) DEVICE IS INTEGRATED WITH THE INVERTER IN ACCORDANCE WITH [NEC 90.(A)] 1.1. THE UTILITY INTERCONNECTION APPLICATION MUST BE APPROVED AND PV SYSTEM INSPECTED PRIOR TO PARALLEL OPERATION 1.1. LOAD-SIDE INTERCONNECTION SHALL BE IN ACCORDANCE WITH [NEC 90. (B)] 1.1. ALL PV SYSTEM COMPONENTS; MODULES, UTILITY-INTERACTIVE INVERTERS, AND SOURCE CIRCUIT COMBINER BOXES ARE IDENTIFIED AND LISTED FOR USE IN PHOTOVOLTAIC SYSTEMS AS REQUIRED BY [NEC 90.] & [NEC 90.0] PV MODULES:UL 170 CERTIFIED, NFPA 70 CLASS C FIRE INVERTER(S):UL 171 CERTIFIED, IEEE 17, 99, 19 COMBINER BOX(S):UL 170 OR UL 171 ACCESSORY 1..1 SCOPE OF WORK: 1.. PRIME IS RESPONSIBLE FOR THE DESIGN AND SPECIFICATIONS OF THE GRID-TIED PHOTOVOLTAIC SYSTEM RETROFIT. PRIME WILL BE RESPONSIBLE FOR COLLECTING EXISTING ONSITE REQUIREMENTS TO DESIGN, SPECIFY, AND INSTALL THE EXTERIOR ROOF-MOUNTED PORTION OF THE PHOTOVOLTAIC SYSTEMS DETAILED IN THIS DOCUMENT WORK INCLUDES: 1.. PV ROOF ATTACHMENTS - ECOFASTEN GF1, S!PROTEA BRACKET 1.. PV RACKING SYSTEM INSTALLATION - IRONRIDGE XR PV MODULE AND INVERTER INSTALLATION - JINKO SOLAR JKM9P-7 / (1) SMA SB 7.7-1SP-US-0 (0V) 1.. PV EQUIPMENT GROUNDING 1.. PV SYSTEM WIRING TO A ROOF-MOUNTED SOLA DECK JUNCTION BOX 1..7 PV INSTALLING SYSTEM MONITORING EQUIPMENT 1..8 PV LOAD CENTERS (IF NEC.) 1..9 PV METERING (IF NEC.) PV DISCONNECTS PV GROUNDING ELECTRODE & BONDING TO (E) GEC 1..1 PV FINAL COMMISSIONING 1..1 (E) ELECTRICAL EQUIPMENT RETROFIT FOR PV NEW PV SYSTEM: 9.0 kwp MAILTA BEND, MO 9 01 AERIAL PHOTO NOT TO SCALE SHEET LIST TABLE SHEET NUMBER PROJECT INFORMATION OWNER NAME: SHEET TITLE T-001 COVER PAGE G-001 NOTES A-101 SITE PLAN A-10 ELECTRICAL PLAN A-10 SOLAR ATTACHMENT PLAN E-01 LINE DIAGRAM E-0 DESIGN TABLES E-0 PLACARDS S-01 ASSEMBLY DETAILS S-0 ASSEMBLY DETAILS R-001 RESOURCE DOCUMENT R-00 RESOURCE DOCUMENT R-00 RESOURCE DOCUMENT R-00 RESOURCE DOCUMENT R-00 RESOURCE DOCUMENT R-00 RESOURCE DOCUMENT O`DONNELL PROJECT MANAGER NAME: DUSTIN DOUGLAS PHONE: NAME: PHONE: PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 AUTHORITIES HAVING JURISDICTION BUILDING: SALINE COUNTY ZONING: SALINE COUNTY UTILITY: KCP&L SCOPE OF WORK SYSTEM SIZE: STC: x 9 = 9.0 kw PTC: x 8.8 = 8.0 kw DC () JINKO SOLAR JKM9P-7 (1) SMA SB 7.7-1SP-US-0 (0V) ATTACHMENT TYPE: ECOFASTEN GF1, S!PROTEA BRACKET MSP UPGRADE: NO 0 PLAT MAP NOT TO SCALE DESIGN SPECIFICATIONS OCCUPANCY: II CONSTRUCTION: SINGLE-FAMILY ZONING: RESIDENTIAL GROUND SNOW LOAD: 0 PSF WIND EXPOSURE: C WIND SPEED: 11 MPH APPLICABLE CODES & STANDARDS BUILDING: IBC 01 IRC 01 ELECTRICAL: NEC 011 FIRE: IFC 01 W N S E COVER PAGE DATE: T (SHEET 1)

12 1 A B.1.1 SITE NOTES.1. A LADDER SHALL BE IN PLACE FOR INSPECTION IN COMPLIANCE WITH OSHA REGULATIONS..1. THE PV MODULES ARE CONSIDERED NON-COMBUSTIBLE AND THIS SYSTEM IS AN UTILITY INTERACTIVE SYSTEM WITH NO STORAGE BATTERIES..1. THE SOLAR PV INSTALLATION SHALL NOT OBSTRUCT ANY PLUMBING, MECHANICAL, OR BUILDING ROOF VENTS..1. PROPER ACCESS AND WORKING CLEARANCE AROUND EXISTING AND PROPOSED ELECTRICAL EQUIPMENT WILL BE PROVIDED AS PER SECTION [NEC 110.].1. ALTERNATE POWER SOURCE PLACARD SHALL BE PLASTIC, ENGRAVED IN A CONTRASTING COLOR TO THE PLAQUE. THIS PLAQUE WILL BE ATTACHED USING AN APPROVED METHOD. IF EXPOSED TO SUNLIGHT, IT SHALL BE UV RESISTANT. ALL PLAQUES AND SIGNAGE WILL BE INSTALLED AS REQUIRED BY THE NEC..1.7 THE GROUNDING ELECTRODE CONDUCTOR SHALL BE PROTECTED FROM PHYSICAL DAMAGE BETWEEN THE GROUNDING ELECTRODE AND THE PANEL (OR INVERTER) IF SMALLER THAN # AWG COPPER WIRE PER NEC 0-B. THE GROUNDING ELECTRODE CONDUCTOR WILL BE CONTINUOUS, EXCEPT FOR SPLICES OR JOINTS AT BUSBARS WITHIN LISTED EQUIPMENT PER [NEC 0.C.].1.8 ROOF COVERINGS SHALL BE DESIGNED, INSTALLED, AND MAINTAINED IN ACCORDANCE WITH THIS CODE AND THE APPROVED MANUFACTURER'S INSTRUCTIONS SUCH THAT THE ROOF COVERING SHALL SERVE TO PROTECT THE BUILDING OR STRUCTURE..1.9 RIGID CONDUIT (AND/OR NIPPLES) MUST HAVE A PULL BUSHING TO PROTECT WIRES BOLTED CONNECTION REQUIRED IN DC DISCONNECTS ON THE WHITE GROUNDED CONDUCTOR (USE POLARIS BLOCK OR NEUTRAL BAR).1.11 ANY CONNECTION ABOVE LIVE PARTS MUST BE WATERTIGHT. REDUCING WASHERS DISALLOWED ABOVE LIVE PARTS, MEYERS HUBS RECOMMENDED..1 SOLAR.. MODULE CERTIFICATIONS WILL INCLUDE UL170, IEC1, IEC IF APPLICABLE, MODULE GROUNDING LUGS MUST BE INSTALLED AT THE MARKED GROUNDING LUOLES PER THE MANUFACTURERS' INSTALLATION REQUIREMENTS... AS INDICATED BY DESIGN, OTHER NRTL LISTED MODULE GROUNDING DEVICES MAY BE USED IN PLACE OF STANDARD GROUNDING LUGS AS SHOWN IN MANUFACTURER DOCUMENTATION AND APPROVED BY THE AHJ... CONDUIT AND WIRE SPECIFICATIONS ARE BASED ON MINIMUM CODE REQUIREMENTS AND ARE NOT MEANT TO LIMIT UP-SIZING AS REQUIRED BY FIELD CONDITIONS... CONDUIT POINT OF PENETRATION FROM EXTERIOR TO INTERIOR TO BE INSTALLED AND SEALED WITH A SUITABLE SEALING COMPOUND...7 DC WIRING LIMITED TO MODULE FOOTPRINT W/ ENPHASE AC SYSTEM...8 WIRING SYSTEMS SHALL BE LOCATED AND SECURED UNDER THE ARRAY W/ SUITABLE WIRING CLIPS...9 MAX DC VOLTAGE CALCULATED USING MANUFACTURER PROVIDED TEMP COEFFICIENT FOR VOC UNLESS NOT AVAILABLE...10 ALL INVERTERS, MOTOR GENERATORS, PHOTOVOLTAIC MODULES, PHOTOVOLTAIC PANELS, AC PHOTOVOLTAIC MODULES, SOURCE CIRCUIT COMBINERS, AND CHARGE CONTROLLERS INTENDED FOR USE IN A PHOTOVOLTAIC POWER SYSTEM WILL BE IDENTIFIED AND LISTED FOR THE APPLICATION PER 90. (D)...11 ALL SIGNAGE TO BE PLACED IN ACCORDANCE WITH LOCAL BUILDING CODE...1 EQUIPMENT LOCATIONS.. ALL EQUIPMENT SHALL MEET MINIMUM SETBACKS AS REQUIRED BY [NEC 110.]... EQUIPMENT INSTALLED IN DIRECT SUNLIGHT MUST BE RATED FOR EXPECTED OPERATING TEMPERATURE AS SPECIFIED BY [NEC 90.1 (A)-(B)] AND [NEC TABLE 10.1 (B)()(C)]... ADDITIONAL AC DISCONNECTS SHALL BE PROVIDED WHERE THE INVERTER IS NOT ADJACENT TO THE UTILITY AC DISCONNECT, OR NOT WITHIN SIGHT OF THE UTILITY AC DISCONNECT... ALL EQUIPMENT SHALL BE INSTALLED ACCESSIBLE TO QUALIFIED PERSONNEL ACCORDING TO NEC APPLICABLE CODES... ALL COMPONENTS ARE LISTED FOR THEIR PURPOSE AND RATED FOR OUTDOOR USAGE WHEN APPROPRIATE...1 WIRING & CONDUIT NOTES.. ALL CONDUIT SIZES AND TYPES, SHALL BE LISTED FOR ITS PURPOSE AND APPROVED FOR THE SITE APPLICATIONS.. ALL PV CABLES AND HOMERUN WIRES BE #10AWG *USE-, PV WIRE, OR PROPRIETARY SOLAR CABLING SPECIFIED BY MFR, OR EQUIVALENT; ROUTED TO SOURCE CIRCUIT COMBINER BOXES AS REQUIRED.. ALL CONDUCTORS AND OCPD SIZES AND TYPES SPECIFIED ACCORDING TO [NEC 90.8 (A)(1) & (B)(1)], [NEC 0] [NEC 90.7] FOR MULTIPLE CONDUCTORS.. ALL PV DC CONDUCTORS IN CONDUIT EXPOSED TO SUNLIGHT SHALL BE DERATED ACCORDING TO [NEC TABLE 10.1 (B)()(C)] BLACK ONLY**.. EXPOSED ROOF PV DC CONDUCTORS SHALL BE USE-, 90 C RATED, WET AND UV RESISTANT, AND UL LISTED RATED FOR 00V, UV RATED SPIRAL WRAP SHALL BE USED TO PROTECT WIRE FROM SHARP EDGES..7 PHASE AND NEUTRAL CONDUCTORS SHALL BE DUAL RATED THHN/THWN- INSULATED, 90 C RATED, WET AND UV RESISTANT, RATED FOR 00V PER NEC 008 OR 1000V PER NEC WIRE DELTA CONNECTED SYSTEMS HAVE THE PHASE WITH THE HIGHER VOLTAGE TO GROUND MARKED ORANGE OR IDENTIFIED BY OTHER EFFECTIVE MEANS..9 ALL SOURCE CIRCUITS SHALL HAVE INDIVIDUAL SOURCE CIRCUIT PROTECTION..10 VOLTAGE DROP LIMITED TO % FOR DC CIRCUITS AND 1% FOR AC CIRCUITS..11 NEGATIVE GROUNDED SYSTEMS DC CONDUCTORS SHALL BE COLOR CODED AS FOLLOWS: DC POSITIVE - RED (OR MARKED RED), DC NEGATIVE - GREY (OR MARKED GREY)..1 POSITIVE GROUNDED SYSTEMS DC CONDUCTORS COLOR CODED: DC POSITIVE - GREY (OR MARKED GREY), DC NEGATIVE - BLACK (OR MARKED BLACK)..1 AC CONDUCTORS >AWG COLOR CODED OR MARKED: PHASE A OR L1- BLACK, PHASE B OR L- RED, PHASE C OR L- BLUE, NEUTRAL- WHITE/GRAY *USE- IS NOT INDOOR RATED BUT PV CABLE IS RATED THWN/THWN- AND MAY BE USED INSIDE **USE- IS AVAILABLE AS UV WHITE..1 STRUCTURAL NOTES:.. RACKING SYSTEM & PV ARRAY SHALL BE INSTALLED ACCORDING TO CODE-COMPLIANT INSTALLATION MANUAL... ROOF MOUNTED STANDARD RAIL REQUIRES ONE THERMAL EXPANSION GAP FOR EVERY RUN OF RAIL GREATER THAN 0'... ARRAY SHALL BE A MIN. HEIGHT OF " ABOVE THE COMPOSITION ROOF... JUNCTION BOX SHALL BE INSTALLED PER MANUFACTURERS' SPECIFICATIONS. IT SHALL BE FLASHED & SEALED PER LOCAL REQUIREMENTS... ROOFTOP PENETRATIONS PERTAINING TO SOLAR RACKING WILL BE COMPLETED AND SEALED W/ APPROVED CHEMICAL SEALANT PER CODE BY A LICENSED...7 ALL PV RELATED RACKING ATTACHMENTS WILL BE SPACED NO GREATER THAN THE SPAN DISTANCE SPECIFIED BY THE RACKING MANUFACTURER. O.C. FINAL ATTACHMENT LOCATIONS MAY BE ADJUSTED IN THE FIELD AS NECESSARY...8 ALL PV RELATED RACKING ATTACHMENTS SHALL BE STAGGERED BY ROW AMONGST THE ROOF FRAMING MEMBERS...1 GROUNDING NOTES.. A GROUNDING ELECTRODE SYSTEM IN ACCORDANCE WITH [NEC 90-7] AND [NEC 0-0] THROUGH [NEC 0 0-1] SHALL BE PROVIDED. PER NEC, GROUNDING ELECTRODE SYSTEM OF EXISTING BUILDING MAY BE USED AND BONDED TO AT THE SERVICE ENTRANCE. IF EXISTING SYSTEM IS INACCESSIBLE, OR INADEQUATE, OR IS ONLY METALLIC WATER PIPING, A SUPPLEMENTAL GROUNDING ELECTRODE WILL BE USED AT THE INVERTER LOCATION CONSISTING OF A UL LISTED 8 FT GROUND ROD WITH ACORN CLAMP... GROUNDING ELECTRODE CONDUCTORS SHALL BE NO LESS THAN #8 AWG AND NO GREATER THAN # AWG COPPER AND BONDED TO THE EXISTING GROUNDING ELECTRODE TO PROVIDE FOR A COMPLETE SYSTEM... PV SYSTEM SHALL BE GROUNDED IN ACCORDANCE TO [NEC 0.1], [NEC TABLE 0.1], AND ALL METAL PARTS OR MODULE FRAMES ACCORDING TO [NEC 90.]... MODULE SOURCE CIRCUITS SHALL BE GROUNDED IN ACCORDANCE TO [NEC 90.]... THE GROUNDING CONNECTION TO A MODULE SHALL BE ARRANGED SUCH THAT THE REMOVAL OF A MODULE DOES NOT INTERRUPT A GROUNDED CONDUCTOR TO ANOTHER MODULE...7 EACH MODULE WILL BE GROUNDED USING THE SUPPLIED CONNECTIONS POINTS IDENTIFIED IN THE MANUFACTURER'S INSTALLATION INSTRUCTIONS...8 ENCLOSURES SHALL BE PROPERLY PREPARED WITH REMOVAL OF PAINT/FINISH AS APPROPRIATE WHEN GROUNDING EQUIPMENT WITH TERMINATION GROUNDING LUGS...9 GROUNDING SYSTEM COMPONENTS SHALL BE LISTED FOR THEIR PURPOSE, AND GROUNDING DEVISES EXPOSED TO THE ELEMENTS SHALL BE RATED FOR DIRECT BURIAL...10 GROUNDING AND BONDING CONDUCTORS SHALL BE COPPER, SOLID OR STRANDED, AND BARE WHEN EXPOSED...11 EQUIPMENT GROUNDING CONDUCTORS SHALL BE SIZE ACCORDING TO [NEC 90.] AND BE A MINIMUM OF #10AWG WHEN NOT EXPOSED TO DAMAGE (#AWG SHALL BE USED WHEN EXPOSED TO DAMAGE)...1 GROUNDING AND BONDING CONDUCTORS, IF INSULATED, SHALL BE COLOR CODED GREEN (OR MARKED GREEN IF # AWG OR LARGER)..1 ALL CONDUIT BETWEEN THE UTILITY AC DISCONNECT AND THE POINT OF CONNECTION SHALL HAVE GROUNDED BUSHINGS AT BOTH ENDS...1 AC SYSTEM GEC SIZED ACCORDING TO [NEC 90.7], [NEC TABLE 0.], DC SYSTEM GEC SIZED ACCORDING TO [NEC 0.1], MINIMUM #8AWG WHEN INSULATED, #AWG WHEN EXPOSED TO DAMAGE...1 EXPOSED NON-CURRENT CARRYING METAL PARTS OF MODULE FRAMES, EQUIPMENTS, AND CONDUCTOR ENCLOSURES SHALL BE GROUNDED IN ACCORDANCE WITH 0.1 OR 0.1(A) REGARDLESS OF VOLTAGE..7.1 INTERCONNECTION NOTES.7. PV DEDICATED BACKFEED BREAKERS MUST BE LOCATED AT THE OPPOSITE END OF THE BUS FROM THE MAIN SERVICE BREAKER OR TRANSFORMER INPUT FEEDER IN ACCORDANCE WITH [NEC 90.(B)(7)].7. SUM OF BREAKER RATINGS SUPPLYING THE BUS MAY NOT EXCEED 10% OF THE THE BUSBAR RATING PER [NEC 90.(B)()] AND/OR [NEC 70.1(D)(1)..7. GROUND FAULT PROTECTION IN ACCORDANCE WITH [NEC 1.9] & [NEC 0.9] ALL EQUIPMENT TO BE RATED FOR BACKFEEDING..7. SUPPLY SIDE INTERCONNECTION ACCORDING TO [NEC 90.(A)] AND/OR [NEC 70.1(A)] WITH SERVICE ENTRANCE CONDUCTORS IN ACCORDANCE WITH [NEC 0.(B)].7. MICROINVERTER BRANCHES SHALL BE CONNECTED TO A SINGLE BREAKER OCPD IN ACCORDANCE WITH [NEC 110.(B)]..8.1 DISCONNECT NOTES.8. DISCONNECTING SWITCHES SHALL BE WIRED SUCH THAT WHEN THE SWITCH IS OPENED THE CONDUCTORS REMAINING LIVE ARE CONNECTED TO THE TERMINALS MARKED LINE SIDE (TYPICALLY THE UPPER TERMINALS).8. AC DISCONNECT MUST BE ACCESSIBLE TO QUALIFIED UTILITY PERSONNEL, BE LOCKABLE, AND BE A VISIBLE-BREAK SWITCH.8. DC CURRENT CONDUCTORS ARE TO REMAIN OUTSIDE OF BUILDING PRIOR TO EITHER A FUSEABLE SOURCE CIRCUIT COMBINER BOX OR A LOAD-BREAK DISCONNECTING DEVICE PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 DATE: CHECKED BY: NOTES M.M. G (SHEET )

13 1 A B GENERAL NOTES 1. FIELD VERIFY ALL MEASUREMENTS. ITEMS BELOW MAY NOT BE ON THIS PAGE N SALINE HWY PROPERTY LINE PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 1'-8" PERMISSION FROM IS IN PINE ST POLE MOUNTED UTILITY METER POLE MOUNTED SERVICE DISCONNECT 8'-11" AREA OF WORK NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 ENTRANCE AC DISCONNECT INVERTER 0'-0" SITE PLAN 1'-10" SITE PLAN 01 1/" = 1'-0" 0 1'-1" '-" N W E S DATE: A (SHEET )

14 1 A B GENERAL NOTES 1. FIELD VERIFY ALL MEASUREMENTS. ITEMS BELOW MAY NOT BE ON THIS PAGE EXTERIOR PV EQUIPMENT (E) (1) POLE MOUNTED UTILITY METER (E) (1) POLE MOUNTED SERVICE DISCONNECT ARRAY kw [x10] (N) MODULES TILT: 0 DEGREES ROOF PITCH: 7:1 AZIMUTH: 180 DEGREES A B C MODULE STRINGING MODULE STRINGING MODULE STRINGING (N) (1) SOLA DECK A A A A A A A A A A CONDUIT PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN INTERIOR PV EQUIPMENT (E) (1) MAIN ELECTRICAL PANEL EXTERIOR PV EQUIPMENT (N) (1) AC DISCONNECT (N) (1) INVERTER NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 CONDUIT IN TRENCH FEET LENGTH MIN 18 INCHES DEEP ARRAY -.90 kw [x] (N) MODULES TILT: 0 DEGREES ROOF PITCH: 7:1 AZIMUTH: 180 DEGREES B B B B B B B B B B B (N) (1) JUNCTION BOX C C C C C C C C C C C ELECTRICAL PLAN 01 1/1" = 1' 0 8' 1' 77.01" 9.0" MODULE: JINKO SOLAR JKM9P-7 9 WATTS W N S E ELECTRICAL PLAN DATE: A (SHEET )

15 1 A B GENERAL NOTES 1. FIELD VERIFY ALL MEASUREMENTS. ITEMS BELOW MAY NOT BE ON THIS PAGE 1'-" ROOF TRUSSSES CORRUGATED METAL RIBS FLUSH MOUNT SOLAR MODULES ATTACHED TO ROOF SURFACE (SEE SHEET S-01 FOR MOUNTING DETAILS) ROOF MATERIAL IS 1 LAYER ASPHALT SHINGLE PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 FLUSH MOUNT SOLAR MODULES ATTACHED TO ROOF SURFACE (SEE SHEET S-0 FOR MOUNTING DETAILS) ROOF MATERIAL IS CORRUGATED METAL SOLAR ATTACHMENT PLAN 01 /" = 1' 0 '-" 10'-8" 77.01" 9.0" MODULE: JINKO SOLAR JKM9P-7 9 WATTS '-" W N S E SOLAR ATTACHMENT PLAN DATE: A (SHEET )

16 1 CONDUCTOR AND CONDUIT SCHEDULE W/ELECTRICAL CALCULATIONS CURRENT-CARRYING CONDUCTORS ID TYPICAL CONDUCTOR CONDUIT OCPD EGC TEMP. CORR. FACTOR CONDUIT FILL FACTOR CONT. CURRENT MAX. CURRENT (1%) BASE AMP. DERATED AMP. TERM. TEMP. RATING TERMINAL VOLTAGE DROP IN CONDUIT AWG PV WIRE, COPPER FREE AIR N/A AWG BARE, COPPER 0.71 (7.7 C) A 1.99A A 9.0A 7 C 0A 0.11% AWG THWN-, COPPER 0.7" DIA EMT N/A 10 AWG THWN-, COPPER 0.71 (7.7 C) A 1.99A 0A 8.A 7 C A 0.11% AWG THWN-, COPPER 0.7" DIA EMT, PVC-0 N/A 10 AWG THWN-, COPPER 0.71 (7.7 C) A 1.99A 0A.7A 7 C A 0.18% AWG THWN-, COPPER 0.7" DIA EMT 0A 8 AWG THWN-, COPPER 0.91 (.7 C) 1 A 0A A 0.0A 7 C 0A 0.08% 0 1 AWG THWN-, COPPER 0.7" DIA EMT N/A AWG THWN-, COPPER 0.91 (.7 C) 1 A 0A 7A 8.A 7 C A 0.0% A A B MODULE STRINGING TO UTILITY GRID (OH) B C MODULE STRINGING MODULE STRINGING A B C JINKO SOLAR JKM9P-7 01 JUNCTION BOX 0 SMA SB 7.7-1SP-US-0 (0V) G L N G L1 0 AC DISCONNECT 0A G EQUIPMENT ABOVE LINE IS (N) NEW 0 L1 L EQUIPMENT BELOW LINE IS (E) EXISTING UNLESS OTHERWISE NOTED. SERVICE DISCONNECT 0/10 V 1Ø, W MAIN BUSS: 00A MAIN SERVICE PANEL 0/10 V 1Ø, W MAIN BUSS: A MAX BREAKER SIZE: ( A x 1. ) - 00 A = 70 A N L L1 TAP (E) MAIN 00A N N L N L1 G TO (E) LOADS (E) UTILITY METER N G GROUND ROD (E) GROUNDING ELECTRODE PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 LINE DIAGRAM 01 0 DATE: CHECKED BY: M.M. SOLA DECK E (SHEET )

17 1 A B SYSTEM SUMMARY MPPT #1 MPPT # MPPT # MODULES IN SERIES ARRAY VMP 8V 0.8V 0.8V ARRAY IMP 8.0A 8.0A 8.0A ARRAY VOC V 97.V 97.V ARRAY MAX VOC 1.7V.9V.9V ARRAY ISC 8.9A 8.9A 8.9A ARRAY STC POWER 9,0W ARRAY PTC POWER 8,0W MAX AC CURRENT A MAX AC POWER 7,80W DERATED (CEC) AC POWER 7,80W DESIGN TEMPERATURES ASHRAE EXTREME LOW -.7 C (-1. F), SOURCE: WHITEMAN AFB (8.7 ; -9. ) ASHRAE % HIGH.7 C (9. F), SOURCE: WHITEMAN AFB (8.7 ; -9. ) MODULES REF. QTY. MAKE AND MODEL PMAX PTC ISC IMP VOC VMP TEMP. COEFF. OF VOC FUSE RATING P1- JINKO JKM9P-7 9W 8.8W 8.9A 8.0A.V.8V -0.1V/ C (-0.7%/ C) 1A REF. QTY. MAKE AND MODEL AC VOLTAGE GROUND INVERTERS OCPD RATING RATED POWER MAX OUTPUT CURRENT BILL OF MATERIALS CATEGORY MAKE MODEL NUMBER REF QTY UNIT QTY/UNIT DESCRIPTION MODULE JINKO JKM9P-7 PM1- PIECES 1 JINKO JKM9P-7 9W 7 CELLS, POLYCRYSTALLINE SILICON INVERTER SMA SB 7.7-1SP-US-0 (0V) I1 1 PIECE 1 SMA SB 7.7-1SP-US-0 (0V) 780W INVERTER DISCONNECT SQUARE D DNRB SW1 1 PIECE 1 SQUARE D DNRB, -POLE, 0A, 0VAC OR EQUIVALENT WIRING GEN-10-AWG-PV-WIRE-CU WR1 70 FEET 1 10 AWG PV WIRE, COPPER (POSITIVE AND NEGATIVE) WIRING GEN--AWG-BARE-CU WR1 1 FEET 1 AWG BARE, COPPER (GROUND) WIRING GEN-10-AWG-THWN--CU-RD WR- 100 FEET 1 10 AWG THWN-, COPPER, RED (POSITIVE) WIRING GEN-10-AWG-THWN--CU-BLK WR- 100 FEET 1 10 AWG THWN-, COPPER, BLACK (NEGATIVE) WIRING GEN-10-AWG-THWN--CU-GR WR- 100 FEET 1 10 AWG THWN-, COPPER, GREEN (GROUND) WIRING GEN-8-AWG-THWN--CU-RD WR 10 FEET 1 8 AWG THWN-, COPPER, RED (LINE 1) WIRING GEN-8-AWG-THWN--CU-BLK WR 10 FEET 1 8 AWG THWN-, COPPER, BLACK (LINE ) WIRING GEN-8-AWG-THWN--CU-WH WR 10 FEET 1 8 AWG THWN-, COPPER, WHITE (NEUTRAL) WIRING GEN-8-AWG-THWN--CU-GR WR 10 FEET 1 8 AWG THWN-, COPPER, GREEN (GROUND) WIRING GEN--AWG-THWN--CU-RD WR 10 FEET 1 AWG THWN-, COPPER, RED (LINE 1) WIRING GEN--AWG-THWN--CU-BLK WR 10 FEET 1 AWG THWN-, COPPER, BLACK (LINE ) WIRING GEN--AWG-THWN--CU-WH WR 10 FEET 1 AWG THWN-, COPPER, WHITE (NEUTRAL) WIRING GEN--AWG-THWN--CU-GR WR 10 FEET 1 AWG THWN-, COPPER, GREEN (GROUND) WIREWAY GEN-PVC-0-0,7" DIA WW FEET 1 PVC-0 CONDUIT, 0.7'' DIA WIREWAY GEN-EMT-0,7" DIA WW- 90 FEET 1 EMT CONDUIT, 0.7'' DIA OCPD GENERIC MANUFACTURER GEN-FU-0A-0VAC F1- PIECES 1 FUSE, 0A, 0VAC TRANSITION BOX GENERIC MANUFACTURER GEN-AWB-TB--X JB1 1 PIECE 1 TRANSITION/PASS-THROUGH BOX, WITH TERMINAL BLOCKS TRANSITION BOX SOLADECK 078-R-ER JB1 1 PIECE 1 SOLADECK 078-1, INPUTS, OR EQUIVALENT MAX INPUT CURRENT MAX INPUT VOLTAGE CEC WEIGHTED EFFICIENCY I1 1 SMA SB 7.7-1SP-US-0 (0V) 0V FLOATING 0A 780W A X18A 00V 97.0% DISCONNECTS REF. QTY. MAKE AND MODEL RATED CURRENT MAX RATED VOLTAGE SW1 1 SQUARE D DNRB OR EQUIV. 0A 0VAC OCPDS REF. QTY. RATED CURRENT MAX VOLTAGE F1-0A 0VAC PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 DESIGN TABLES DATE: E-0.00 (SHEET 7)

18 1 A B!CAUTION! POWER TO THIS BUILDING IS ALSO SUPPLIED FROM ROOF MOUNTED SOLAR ARRAYS WITH SAFETY DISCONNECTS AS SHOWN: BACK! WARNING! ELECTRIC SHOCK HAZARD. THE DC CONDUCTORS OF THIS PHOTOVOLTAIC SYSTEM ARE UNGROUNDED AND MAY BE ENERGIZED. LABEL 1 AT EACH JUNCTION, COMBINER, DISCONNECT AND DEVICE WHERE ENERGIZED UNGROUNDED CONDUCTORS MAY BE EXPOSED DURING SERVICE [NEC 90.(F)] PHOTOVOLTAIC AC DISCONNECT OPERATING CURRENT: A AC OPERATING VOLTAGE: 0 V AC LABEL AT POINT OF INTERCONNECTION, MARKED AT DISCONNECTING MEANS [NEC 90.]! WARNING! ELECTRIC SHOCK HAZARD DO NOT TOUCH TERMINALS. TERMINALS ON BOTH LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION. LABEL AT EACH DISCONNECTING MEANS FOR PHOTOVOLTAIC EQUIPMENT [NEC 90.17]! WARNING! DUAL POWER SOURCES. SECOND SOURCE IS PV SYSTEM OPERATING CURRENT: OPERATING VOLTAGE: MAX SHORT CURRENT: MAX VOLTAGE:! CAUTION! 8.0 A DC 0.8 V DC 8.9 A DC.9 V DC LABEL AT EACH DC DISCONNECTING MEANS [NEC 90.] PHOTOVOLTAIC SYSTEM CIRCUIT IS BACKFED LABEL LABEL AT POINT OF INTERCONNECTION; LABEL, SUCH AS LABEL OR LABEL MUST IDENTIFY PHOTOVOLTAIC SYSTEM [NEC 70.1(D)()] DIRECTORY PERMANENT PLAQUE OR DIRECTORY PROVIDING THE LOCATION OF THE SERVICE DISCONNECTING MEANS AND THE PHOTOVOLTAIC SYSTEM DISCONNECTING MEANS IF NOT IN THE SAME LOCATION [NEC 90.(B)] WHERE THE INVERTERS ARE REMOTELY LOCATED FROM EACH OTHER, A DIRECTORY IN ACCORDANCE WITH SHALL BE INSTALLED AT EACH DC PV SYSTEM DISCONNECTING MEANS, AT EACH AC DISCONNECTING MEANS, AND AT THE MAIN SERVICE DISCONNECTING MEANS SHOWING THE LOCATION OF ALL AC AND DC PV SYSTEM DISCONNECTING MEANS IN THE BUILDING. [NEC 90.(H)] N E W PV ARRAY S MAIN DISTRIBUTION UTILITY DISCONNECT FRONT POLE MOUNTED SERVICE DISCONNECT PV ARRAY PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 INTERACTIVE PHOTOVOLTAIC SYSTEM CONNECTED PHOTOVOLTAIC DC DISCONNECT INTERACTIVE PHOTOVOLTAIC SYSTEM CONNECTED PHOTOVOLTAIC SYSTEM DISCONNECT LOCATED WEST SIDE OF THE HOUSE LABEL 7 AT UTILITY METER [NEC 90.(B)] WARNING: PHOTOVOLTAIC POWER SOURCE LABEL 9 AT EXPOSED RACEWAYS, CABLE TRAYS, AND OTHER WIRING METHODS; SPACED AT MAXIMUM 10 FT SECTION OR WHERE SEPARATED BY ENCLOSURES, WALLS, PARTITIONS, CEILINGS, OR FLOORS. [NEC 90.1(E)] LETTERS AT LEAST /8 INCH; WHITE ON RED BACKGROUND; REFLECTIVE [IFC ] LABEL 8 AT EACH DC DISCONNECTING MEANS [NEC 90.1(C)()] PHOTOVOLTAIC AC DISCONNECT LABEL 10 AT EACH AC DISCONNECTING MEANS [NEC 90.1(C)()] PLAQUE! WARNING! INVERTER OUTPUT CONNECTION. DO NOT RELOCATE THIS OVERCURRENT DEVICE LABEL 11 AT POINT OF INTERCONNECTION OVERCURRENT DEVICE [NEC 70.1(D)(7)] LABELING NOTES: 1.1 LABELING REQUIREMENTS BASED ON THE 011 NATIONAL ELECTRICAL CODE, INTERNATIONAL FIRE CODE 0.11, OSHA STANDARD , ANSI Z. 1. MATERIAL BASED ON THE REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION. 1. LABELS TO BE OF SUFFICIENT DURABILITY TO WITHSTAND THE ENVIRONMENT INVOLVED. 1. LABELS TO BE A MINIMUM LETTER HEIGHT OF /8 AND PERMANENTLY AFFIXED. PLACARDS DATE: E-0.00 (SHEET 8)

19 A B 1 8 D S-01 7 D S-01 0 GENERAL NOTES 1. FIELD VERIFY ALL MEASUREMENTS D1 RACKING DETAIL (TRANSVERSE) NOT TO SCALE ROOF SLOPE D RACKING DETAIL (LONGITUDINAL) NOT TO SCALE SHEET KEYNOTES 1. ROOF MATERIAL: ASPHALT SHINGLE. ROOF STRUCTURE: TRUSS. ATTACHMENT TYPE: ECOFASTEN GF1. MODULE MANUFACTURER: JINKO SOLAR. MODULE MODEL: JKM9P-7. MODULE LENGTH: IN. 7. MODULE WIDTH: 9.0 IN. 8. MODULE WEIGHT: 9. LBS. 9. SEE SHEET A-10 FOR DIMENSION(S) 10. MIN. FIRE OFFSET: NO FIRE CODE ENFORCED 11. TRUSS SPACING: IN. O.C. 1. TRUSS SIZE: X NOMINAL 1. LAG BOLT DIAMETER: /1 IN. 1. LAG BOLT EMBEDMENT: IN. 1. TOTAL # OF ATTACHMENTS: 1. TOTAL AREA: SQ. FT. 17. TOTAL WEIGHT:.8 LBS. 18. WEIGHT PER ATTACHMENT: 8. LBS. 19. DISTRIBUTED LOAD:.98 PSF. 0. MAX. HORIZONTAL STANDOFF: 8 IN. 1. MAX. VERTICAL STANDOFF: LANDSCAPE: IN., PORTRAIT: IN.. STANDOFF STAGGERING: YES. RAIL MANUFACTURER (OR EQUIV.): IRONRIDGE. RAIL MODEL (OR EQUIVALENT): XR10. RAIL WEIGHT: 0. PLF.. MAX. TRUSS SPAN: 0 FT. 7. MODULE CLEARANCE: IN. MIN., IN. MAX. PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 D 7 RACKING DETAIL (TOP) NOT TO SCALE D DETAIL (TRANSVERSE) NOT TO SCALE D DETAIL (LONGITUDINAL) NOT TO SCALE ASSEMBLY DETAILS DATE: S (SHEET 9)

20 A B 1 8 D S-01 7 D S-01 0 GENERAL NOTES 1. FIELD VERIFY ALL MEASUREMENTS D1 RACKING DETAIL (TRANSVERSE) NOT TO SCALE ROOF SLOPE D RACKING DETAIL (LONGITUDINAL) NOT TO SCALE SHEET KEYNOTES 1. ROOF MATERIAL: CORRUGATED METAL. ROOF STRUCTURE: TRUSS. ATTACHMENT TYPE: S!PROTEA BRACKET. MODULE MANUFACTURER: JINKO SOLAR. MODULE MODEL: JKM9P-7. MODULE LENGTH: IN. 7. MODULE WIDTH: 9.0 IN. 8. MODULE WEIGHT: 9. LBS. 9. SEE SHEET A-10 FOR DIMENSION(S) 10. MIN. FIRE OFFSET: NO FIRE CODE ENFORCED 11. TRUSS SPACING: IN. O.C. 1. TRUSS SIZE: X NOMINAL 1. LAG BOLT DIAMETER: /1 IN. 1. LAG BOLT EMBEDMENT: IN. 1. TOTAL # OF ATTACHMENTS: 1. TOTAL AREA: 9. SQ. FT. 17. TOTAL WEIGHT: 171. LBS. 18. WEIGHT PER ATTACHMENT:. LBS. 19. DISTRIBUTED LOAD:.98 PSF. 0. MAX. HORIZONTAL STANDOFF: 8 IN. 1. MAX. VERTICAL STANDOFF: LANDSCAPE: IN., PORTRAIT: IN.. STANDOFF STAGGERING: YES. RAIL MANUFACTURER (OR EQUIV.): IRONRIDGE. RAIL MODEL (OR EQUIVALENT): XR10. RAIL WEIGHT: 0. PLF.. MAX. TRUSS SPAN: 0 FT. 7. MODULE CLEARANCE: IN. MIN., IN. MAX. PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 D 7 RACKING DETAIL (TOP) NOT TO SCALE D DETAIL (TRANSVERSE) NOT TO SCALE D DETAIL (LONGITUDINAL) NOT TO SCALE ASSEMBLY DETAILS DATE: S-0.00 (SHEET 10)

21 A B 1 PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 RESOURCE DOCUMENT DATE: R (SHEET 11 )

22 A B 1 PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 RESOURCE DOCUMENT DATE: R (SHEET 1)

23 A B 1 PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 RESOURCE DOCUMENT DATE: R (SHEET 1)

24 A B 1 PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 RESOURCE DOCUMENT DATE: R (SHEET 1)

25 A B 1 PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 RESOURCE DOCUMENT DATE: R (SHEET 1)

26 A B 1 PHONE: ADDRESS: 1 N PATTERSON AVE SPRINGFIELD,MISSOURI 80 PERMISSION FROM IS IN NEW PV SYSTEM: 9.0 kwp MALTA BEND, MO 9 RESOURCE DOCUMENT DATE: R (SHEET 1)