KNX-20E mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15 KNX-20E_ EH-0817
|
|
- Randolph Randall
- 5 years ago
- Views:
Transcription
1 Bauar t gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID KX-20E_ EH mA KX Power Supply KX-20E-640 Isolation classⅠ Installed on DI rail TS-35/7.5 or 15 File ame:kx-20e-640-spec
2 KX-20E_ EH mA KX Power Supply KX-20E-640 SPECIFICATIO MODE BUS OUTPUT VOTAGE WITH CHOKE DC OUTPUT VOTAGE WITHOUT CHOKE RATED CURRET RATED POWER KX-20E-640 Bus,30V (KX black/red terminal block) 30V(Additional output for ancillary power) 640mA 19.2W OUTPUT IPUT RIPPE OISE (max.) ote.2 SHORT CIRCUIT CURRET SETUP, RISE TIME AC MAIS FAIURE BACK-UP TIME(Typ.) VOTAGE RAGE FREQUECY RAGE EFFICIECY (Typ.) ote.3 AC CURRET (Typ.) IRUSH CURRET (Typ.) EAKAGE CURRET 100mVp-p 1.4A 1000ms, 50ms/230VAC at full load 200ms/230VAC at full load 180 ~ 264VAC 254 ~ 370VDC 47 ~ 63Hz 86% 0.22A/230VAC COD START 40A/230VAC <1mA / 240VAC PROTECTIO FUCTIO OVEROAD OVER VOTAGE RESET ED DISPAY CHOKE WORKIG TEMP. WORKIG HUMIDITY EVIROMET STORAGE TEMP., HUMIDITY SAFETY EMC (ote 4) VIBRATIO TYPE OF PROTECTIO SAFETY STADARDS 33 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover Physical button for reset the bus (Press the RESET button for at least 20 seconds to reset the KX Bus) Green ED (O) :ormal operation One integrated choke TYPE OF PROTECTIO IP20 design EMC EMISSIO 205 ~ 235% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed -30 ~ +70 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +85, 10 ~ 95% RH 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes E ,E approved WITHSTAD VOTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC ISOATIO RESISTACE Ⅰ Ⅰ Red ED1 (Reset):Reset the bus; Red ED2 (> max ):Overload/Short I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to E ,-5-3;E ;E ,-3-3 OTHERS EMC IMMUITY MTBF DIMESIO MOUTIG PACKIG Compliance to E ,-5-3;E ,3,4,5,6,8,11, heavy industry level, criteria A 109K hrs min. MI-HDBK-217F (25 ) 52.5*90*54.5mm (W*H*D) 35mm mounting rail according to DI E Kg ; 60pcs/13.9Kg/0.97CUFT OTE File ame:kx-20e-640-spec
3 KX-20E_ EH mA KX Power Supply KX-20E-640 Block Diagram fosc :65KHz I/P EMI FITER RECTIFIERS FITER POWER SWITCHIG RECTIFIERS FITER O.C.P. CHOKE MODUE BUS -V BUS FG O..P. COTRO DETECTIO CIRCUIT O.V.P. without choke -V without choke Derating Curve Static Characteristics OAD (%) OAD (%) (VERTICA) AMBIET TEMPERATURE ( ) IPUT VOTAGE (V) 60Hz Mechanical Specification 3SU 1 standard unit (SU)=18mm EIB/KX Case o. KX Unit:mm 1 Reset KX bus termnials (Red :+, Black:-) Ancillary power termnials Reset button Power O (Green) Reset (Red) Ⅰ> Ⅰmax (Red) ADMISSIBE DI-RAI:TS35/7.5 OR TS35/15 35 File ame:kx-20e-640-spec
4 KX-20E_ EH mA KX Power Supply KX-20E-640 Configuration and Commissioning The does not need any configuration or application program. Typical application Application 1:Powering KX Bus Only KX Bus -V Reset KX-20E-640 ighting HV AC System Blinds Shutters PE Bus wiring consideration: 1. the maximum number of bus s connected is the maximum length of a line segment is 350 m, measured along the line between the power supply and the furthest bus. 3. the maximum distance between two bus s cannot exceed 700 m 4. the maximum length of a bus line is 1000 m, keeping into account all segments Application 2:Powering KX Bus and KX KX Bus Ⅰ1 Ⅰ2 -V Reset KX-20E-640 ighting HV AC System Blinds Shutters PE ote: 1. Use only ancillary output of KX-20E-640 to power the KX 2. The total current Ⅰ1 + Ⅰ2 should be equal or less than 640mA. Ⅰ1 + Ⅰ2 640mA 3. The above Bus wiring consideration is still applicable Recommended Screwdriver, Wire and Torque Setting 1.Screwdriver(Width*Thick):Slotted screwdriver 2.5*0.4~3.5* Wire:0.5~4.0mm solid core or 0.5~2.5mm finely stranded 3.Torque:0.8m Installation Manual Please refer to : File ame:kx-20e-640-spec
5 Headquarter Switzerland: Pewatron AG Thurgauerstrasse 66 CH-8050 Zurich Phone Office Germany: Pewatron Deutschland GmbH Edisonstraße 16 D Unterschleißheim Phone We are here for you. Addresses and Contacts. Sales Germany Austria Postcode Postcode Postcode Austria Kurt Stritzelberger Phone Mobile kurt.stritzelberger@pewatron.com Postcode Postcode Gerhard Vetter Phone Mobile gerhard.vetter@pewatron.com Geometrical sensors Sensor elements Thorsten Ravagni Phone thorsten.ravagni@pewatron.com Sales Switzerland iechtenstein Postcode Basil Frei Phone Mobile basil.frei@pewatron.com Postcode Christian Mohrenstecher Mobile christian.mohrenstecher@pewatron.com Sales International Key Accounts Peter Felder Phone Mobile peter.felder@pewatron.com Sales Other Countries / Product Management Pressure Sensors Philipp Kistler Phone philipp.kistler@pewatron.com Gas sensors / Gas sensor modules oad cells Dr. Thomas Clausen Phone thomas.clausen@pewatron.com Flow / evel / Medical products Dr. Adriano Pittarelli Phone adriano.pittarelli@pewatron.com Accelerometers / evel Flow sensor elements Thorsten Ravagni Phone thorsten.ravagni@pewatron.com Power supplies Sebastiano eggio Phone sebastiano.leggio@pewatron.com inear position sensors Angle sensors Eric etsch Phone eric.letsch@pewatron.com Drive technology CH Postcode / DE Roman Homa Mobile roman.homa@pewatron.com Drive technology CH Postcode / AT / IT / FR Christian Mohrenstecher Mobile christian.mohrenstecher@pewatron.com Current sensors Power solutions Osman Coban Phone osman.coban@pewatron.com Competitive sensor power supply solutions worldwide
KNX-20E. 640mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15. File Name:KNX-20E-SPEC Sicherheit ID
640mA KX Power Supply KX-20E Bauar t gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Isolation classⅠ Installed on DI rail TS-35/7.5 or 15 File ame:kx-20e-spec 2016-08-24 640mA
More informationThe factory-set pressure switches.
The factory-set pressure switches. Pressure switch 901 with factory-set pressure setting TUV. SUDWEST BAUMUSTER.. GEPRUFT. Application Factory-set pressure switch monitoring overpressure, vacuum or differential
More informationD R C- 4 0 s e r i e s
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /
More informationE4T. Miniature Optical Kit Encoder Page 1 of 6. Description. Features E4T_ EH-0117
Description Page 1 of 6 The miniature transmissive optical encoder is designed to provide digital quadrature encoder feedback for high volume, limited space applications. The is designed to be a drop in
More informationSolid State Pressure Sensor. STX Series Model 13A FEATURES DESCRIPTION
STXA-D_----EH-87 Solid State Pressure Sensor ANALOG OUTPUT STX Series Model A FEATURES Fastening Mount Calibrated Span and Offset Multi-order Temperature compensation./. or optional or Supply Customized
More informationFS20 Low Force Compression Load Cell
750 and 1500 Grams-Force High Level Output Interchangeable Industry Standard Packaging DESCRIPTION The FS20 is a low compression force sensor that creates new markets previously unrealizable due to cost
More informationOptical Kit Encoder Page 1 of 9. Description. Mechanical Drawing. Features EH-1014.pdf EH-1014
Description Page 1 of 9 The optical encoder is designed as a direct replacement for the Avago HEDS / HEDM 5500-5600 series. The is a rotary encoder with a molded polycarbonate enclosure, which utilizes
More informationFujikura Ltd. SPECIFICATIONS. Oxygen sensor V-8363A FCX - UC. August 17, No. Messrs. Model: RoHS compliance model, Ceramic base.
No. August 17, 2010 V-8363A Messrs. SPECIFICATIONS Oxygen sensor Model: FCX - UC RoHS compliance model, Ceramic base. Project: Reference: Fujikura Ltd. Specifications of Oxygen Sensor Unit V-8363A 1. General:
More informationUHP-500 series. 500W Slim Type with PFC Switching Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 500W Slim Type with PFC Switching Supply S&E GB4943 UL950- EN950- IEC950- % - ~+ Industrial automation machinery Industrial
More informationOptical Kit Encoder Page 1 of 14. Description. Features EH-1014.pdf EH-1014
Page 1 of 14 Description The Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin finger-latching connector. This optical incremental encoder is designed to easily mount
More informationUHP-200 series. 200W Slim Type with PFC Switching Power Supply. File Name:UHP-200-SPEC GB4943 EN EN UL IEC
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 000000000 GB494 UL950- EN950- EN5- IEC950- % - ~+ R SPECIFICATION MODEL UHP-00 -. UHP-00-4. UHP-00-5 UHP-00 - UHP-00-5 UHP-00-4 UHP-00-6
More informationUHP-350 series. 350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 50W Slim Type with PFC Switching Power Supply GB494 UL950-1 EN950-1 EN5-1 IEC950-1 - ~ Industrial automation machinery Industrial
More information350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 350W Slim Type with PFC Switching Power Supply S&E GB4943 UL950-1 EN950-1 EN335-1 IEC950-1 % - ~+ Industrial automation machinery
More informationIS 15885(Part 2/Sec13) R ( for 24V only)
THOMAS SAMUEL THOMAS SAMUEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g W Constant Voltage + Constant Current LED Driver 110 M IP67 Features Constant Voltage + Constant Current mode output Plastic
More informationPB-600 SERIES 600 Watt Battery Charger Power Supply Measures: 9.06 x 6.22 x 2.64
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT INPUT MEAN WELL PB600 SERIES PB60012 PB60024 PB60048 BOOST CHARGE VOLTAGE 14.4V 28.8V 57.6V FLOAT
More information600W Intelligent Single Output Battery Charger 21A 10.5A VOLTAGE RANGE FREQUENCY RANGE
Bauart gepruft Sicherheit egelma ge od o s be wac g 600W Intelligent Single Output Charger PB600 series SPECIFICATION SAFETY & EMC (Note 3) SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
More informationSELV IP30 (CCC optional)
Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP30 level, optional IP67 rating Typical
More informationPressure. Measurement Specialties leads the industry with. a wide array of standard and custom products. ranging from board level components to fully
.pdf Solutions by Sensor type: Measurement Specialties leads the industry with a wide array of standard and custom products ranging from board level components to fully amplified and packaged transducers,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PB-300 / 360 USER'S MANUAL SPECIFICATION : PB-300 MODEL BOOST CHARGE VOLTAGE
More information60W Single Output LED Power Supply. HBG-60 series. File Name:HBG-60-SPEC
Ⅱ { SPECIFICATION MODEL HBG-60-10 HBG-60-10 HBG-60-2 OUTPUT INPUT RATED CURRENT CURRENT ACCURACY EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT SHORT CIRCUIT PROTECTION OVER TEMPERATURE
More informationLPF-25 series. 25W Constant Voltage + Constant Current LED Driver
F 110 M M SELV IP67 Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP67 level Typical
More information60W Constant Current Mode LED Driver. HBG-60 series. File Name:HBG-60-SPEC
05 SPECIFICATION MODEL OUTPUT INPUT RATED CURRENT RATED POWER CONSTANT CURRENT REGION OPEN CIRCUIT VOLTAGE(max.) CURRENT ADJ. RANGE CURRENT RIPPLE CURRENT TOLERANCE SET UP TIME VOLTAGE RANGE FREQUENCY
More informationVideo & Power Over Coax Kit
VPoC User Manual Video & Power Over Coax Kit 1CH Video Power over Coax w/ 12V DC Receiver Device VPoC24DC-01K VPoC24DC-01 N-42-1 x1 N-41C 4CH / 8CH / 16CH Video Power over Coax Server Kit VPoC24DC-04K
More informationFeatures : 3 years warranty PB PB PB V 28.8V 57.6V 13.8V 86% 87% 89%
600W Single Output Charger PB600 series SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 2) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE RECOMMENDED BATTERY
More information1000W Intelligent Single Output Battery Charger PB PB PB V 28.8V 57.6V 13.8V 85% 88% 89%
PB000 series SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note ) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE OUTPUT CURRENT RECOMMENDED BATTERY 00 ~ 600Ah CAPACITY(AMP
More information1000W Intelligent Single Output Battery Charger 27.6V 55.2V OUTPUT CURRENT 16 ~ 18V 32 ~ 35V 64.5 ~ 69.5V OVER VOLTAGE PROTECTION
auart gepruft Sicherheit egelma ge od o s be wac g 000W Intelligent Single Output attery Charger P000 series SPECIFICTION SFETY & EMC (Note 3) SFETY STNDRDS WITHSTND VOLTGE ISOLTION RESISTNCE EMC EMISSION
More informationJameco SKU Number:
Jameco SKU Number: 2105842 60W Single Output with Battery Charger(US Function) SC-60 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE OUTUT NUMBER
More informationPB-600 series. Jameco SKU Number: W Single Output Battery Charger SPECIFICATION MODEL
.. Jameco SKU Number: 24381 600W Single Output Charger B-600 series SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 2) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE
More informationTRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
More informationOpen Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
More informationBP- A Series Switch-Mode 3 Stage Battery Charger User s Manual
BP- A Series Switch-Mode 3 Stage Battery Charger User s Manual Table of Contents 1. Important Safety Information. 1 1-1 General Safety Precautions 1 1-2 Battery Precautions..... 2 2. Features... 3 2-1
More informationE4T. OEM Miniature Optical Kit Encoder Page 1 of 6. Description. Features EH-0315.pdf
Description Page 1 of 6 The miniature transmissive optical encoder is designed to provide digital quadrature encoder feedback for high volume, limited space applications. The is designed to be a drop in
More informationDIN Rail Power Supplies
DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
More information+V -V D1 - D2 L N + - M6/8 M10/10 PE L N 13/02/2019 ALIMENTATION 48V 300W-SJN-V8. Code W. Al Jour/Nuit. Alarme. Al Jour. Relais. Relais.
+.. 4-6 ) 1-6 ) 6 1 " & 8 @?! 9 * H EA H I ) = H A I, F = H JI 7 JE EI = JE I * 5 6 ) HK A 6 H O '! $ 5 L HA I M M M > I J=? U1 A1 - + C NCNO +V -V N L D1 - D2 A2 22 12 21 24 14 Relais Alarme A2 A1 14
More informationSwitching Power Supplies
Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTIO DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES Compact size preserves panel
More informationSwitching Power Supplies
Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTIO DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES Compact size preserves panel
More informationSwitching Power Supplies
Features Boxed Power Supplies with Screw Terminal Block Single- and Triple Output Models EMI Compliance with EN 55022 and FCC Part 15, Level B Short Cirquit Protection Overvoltage Protection High Efficiency
More information5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]
R AC-DC Power Supplies Configurable type series Ordering information ACO - OOOOOO- OO- OO 6 7 8 9 Recommended EMI/EMC Filter F AC-6-7 F AC--7 6F AC--7 9F AC--7 High voltage pulse noise type : AP series
More informationUCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet
Combined Power Supply & Battery Charger Data Sheet INTRODUCTION UCS-CHR24V55W is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range
More information5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]
Recommended EMI/EMC Filter ACEF AC-6-7 ACEF AC--7 ACE6F AC--7 ACE9F AC--7 High voltage pulse noise type : AP series ow leakage current type : AM series *The EMI/EMC Filter is recommended *to connect with
More information40A DC UPS Module SPECIFICATION MODEL DC INPUT / DC BUS DR-UPS40 24 ~ 29V 40A 21 ~ 29V 0 ~ 40A 2A 4 / 7 / 12AH / 24V
40A DC US Module Jameco SKU Number: 2103273 DR-US40 SECIFICATION MODEL DC INUT / DC BUS BATTERY INUT / OUTUT FUNCTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE (Typ.) RATED CURRENT VOLTAGE RANGE
More informationTest Report: UHP
Test Report: UHP-500-36 500W Slim Type with PFC Switching Supply DESIGN VERIFY TEST Output Function Test Input Function Test Protection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test
More informationSpecifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W
2019-V1.0-0318 Specifications AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
More informationIndustrial Power Supplies
, Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with
More informationPower Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies
Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include:
More informationPS6R 480W Switching Power Supply
ew Series PS6R 4W Switching Power Supply Reduced size and high efficiency cuts operating costs. Energy-saving 93% Efficiency Space-saving 85mm wide Efficiency (%) 96 94 92 88 86 84 82 Competitor A Competitor
More informationTDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
More informationPower Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs.
Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module
More informationUNA SERIES Embedded Power Supply Features Model naming method UNA 350P / Applications UNA Conformity to RoHS Directive Product Line-up
SERIES 350PB, PN 350PB/350PN Specifications CH 2 3 5 Voltage Range (*)(*8) V AC85-265 (AC85-5 : Need output derating) Frequency (*)(*8) Hz 7-63 Power Factor (00/20VAC)(typ) (*5) 0.98 / 0.92 (Ta=25) Input
More informationTDK-Lambda ZWS300BAF/A
ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4
More informationSwitching Power Supplies
, 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals
More informationZurik EMLV LED Driver
White Zurik EMV Dimmable Driver (Phase Dimming) For Forward Phase, MV, Reverse Phase, and EV Model: ZRK-EMV-120-24VDC : 100-130V~ 2A 50/60 Hz λ: 0.65 : 24V 5A COFORMS TO U STD.1012 CERTIFIED TO CSA STD.C22.2
More informationMODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
More informationEmergency lighting units EM powerled
EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage
More informationINDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
More informationConstant Voltage TRIAC Dimmable Driver---120W Series. Features
Features Specification Output constant voltage Universal AC input: 90-130VAC.Power Factor:up to 0.95 High Efficiency: up to 84% Protections: short circuit / over loading / over current Full protection
More informationSpecifications 2019-V AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W
2019-V1.0-0118 Specifications AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationEmergency lighting units EM powerled
EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
More informationRUZ- _/_ Protection (3) Isolation Option (4)
Features Unregulated Converters Description Dual output from a single input rail 1kVDC or 2kVDC input/output basic isolation 1kVDC output/output isolation Power sharing on outputs Optional continuous short
More informationDC DC Converter High Precision constant voltage high efficiency dedicated to the LED panel MODEL: EF-DC-8A
DESCRIPTION: EF-DC-8A DC DC Converter, high efficiency Up to 96%, Use Aluminum solid capacitors. long life of 50,000 hours, high-precision constant voltage output, dedicated to 90w the following, all types
More informationGB60S 60W Single Output General Purpose Series
Features 2 x 3 x 1.0 Package Operates to 80 C Ambient For 1U Applications 60W convection cooled Universal Input 90-264Vac Optional Power ON LED Approved to CSA/EN/IEC/UL60950-1, 2 nd Edition Efficiency
More informationEmergency lighting units EM powerled
EM power EM power PRO EZ-3, 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with I interface and automatic test function For self-contained emergency lighting
More informationEmergency lighting units EM powerled
EM power EM power BASIC 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60
More informationMD60 Series 60W DINergy Power Supply
MD60 Series 60W DINergy Power Supply Features Compact size, high efficiency and DIN Rail mounting 60 C rated provides full power/no derating required 100-240VAC wide-range auto-selection input Overcurrent,
More informationFeatures. Unregulated Converters. 2 Watt SIP7 Single and Dual Output RKZE. RKZE- _/_ Protection (4) Isolation Option (3) Single or Dual
Features Unregulated Converters Low cost 2W converter Industry standard SIP7 package 3kVDC or 4kVDC isolation options Single or dual outputs Short circuit protected (/P versions) EN62368-1 DC/DC Converter
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
More informationFeatures. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More informationNotes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
More information100W Single Output Switching Power Supply NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT
MODEL:LPV-100-24 OUTPUT FUNCTION TEST 1 RIPPLE & NOISE V1: 150 mvp-p (Max ) V1: 6 mvp-p (Max ) 2 OUTPUT VOLTAGE TOLERANCE V1: -5 %~ +5 % (Max) I/P: 100VAC / 264 VAC O/P:FULL/ 0% LOAD V1: -0.36%~ +0.2 %
More informationTest Report: GST18A24-P1J
Test Report: GST18A24-1J 18W AC-DC High Reliability Industrial Adaptor DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
More informationAdvanced Battery Charger. 3 - stage charging capability (IUOU) 4.1 A / 100VAC 1.8A / 240VAC
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationDC (on) LED Signal. Multiple output connector for easy wiring
DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage
More informationRWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
More informationZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
More informationAdvanced Battery Charger 0 ~ 15A 0 ~ 25A 0 ~ 35A 0 ~ 50A 0 ~ 80A. 3 - stage charging capability (IUOU) 90 ~ 264VAC (refer to de-rating curve)
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationDPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationDPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationCUT75 Series. Dual or Triple Output 75W Low Profile Power Supplies. CUT75 Series 1. Specification
CUT75 Series www.emea.tdk-lambda.com/cut Dual or Triple Output 75W Low Profile Power Supplies Features Benefits Triple (useable as dual) output supply Addresses multiple voltage needs in one hit Compact
More informationDPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
More information1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
More informationPRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
More informationABB i-bus EIB EIB Power Supply Units SV/S SV/S SU/S
Product Manual ABB i-bus EIB EIB Power Supply Units SV/S 30.320.5 SV/S 30.640.5 SU/S 30.640. Intelligent Installation Systems Contents Page EIB Power Supply Units. Introduction.........................................
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationDPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More information4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
More informationEfficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
More informationTest Report: IRM-45-12
Test Report: IRM-45-12 45W Single Output Encapsulated Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test E.M.C.
More informationAdvanced Battery Charger. 3 - stage charging capability (IUoU) 25A
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationZWD100PAF Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
More informationZWD225PAF Series Instruction Manual
Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.
More information