INDUSTRIAL VENTILATION NEW

Size: px
Start display at page:

Download "INDUSTRIAL VENTILATION NEW"

Transcription

1 INDUSTRIAL VENTILATION NEW

2 HEADQUARTERS VORTICE IN THE WORLD Founded in 17, Vortice France is located at Crétail about 1 Km from Paris. Our current Vortice Headquarters have been located in Tribiano (Milan) since 172. Vortice main company s philosopy is the concept that air is our life. Our mission is always to provide effective solutions for improved air quality using the latest technology to develop and manufacture effective products worldwide. Vortice has achieved European market leadership by dedicating their efforts to the production of products for ventilation, climate control, heating, extraction, purification and the treatment of air, for domestic, commercial and industrial applications. Since 15 Vortice has been synonymous with quality and excellence and continues to make significant improvements by investing in continuous research to improve the efficiency and quality of its products. Founded in 177, Vortice Limited is located at Burton on Trent in the East Midlands Our Moscow representative office was established. Founded in 212, Vortice Ventilation System is located about 2 Km from Shanghai. Founded in 212, Vortice Latam in San Josè Costarica. 2

3 INDEX PRACTICAL STEPS TOWARDS SAVING ENERGY 7 LEGEND INDUSTRIAL VENTILATION 1 VORTICEL E RANGE Low-pressure plate axial fans with AC motor shafts mounted on ball bearings combined with plastic resin impellers 1 E ATEX RANGE Axial plate-mounted fans for installation in potentially explosive areas 18 VORTICEL A-E RANGE Compact plate axial fans equipped with thermo-protected AC motor, external rotor, 1 speed and shafts mounted on ball bearings combined with metal impellers 2 VORTICEL MPC - E RANGE Medium-pressure long cased axial fans with single- phase and three-phase AC motor, mounted on ball bearings combined with blade profile impellers 36 C ATEX RANGE Centrifugal fans for installation in potentially explosive areas TORRETTE RF - EU RANGE Centrifugal roof fans with horizontal discharge 6 TORRETTE TR E RANGE Centrifugal roof fans for horizontal discharge with auto-ventilated AC motor, rotor mounted on ball bearings 52 TORRETTE TR E-V RANGE Centrifugal roof fans for vertical discharge with asynchronous AC motor, rotor mounted on ball bearings 58 TORRETTE TR ED RANGE Centrifugal roof fans with horizontal discharge for hot fumes extraction 6 TORRETTE TR ED-V RANGE Centrifugal roof fans with vertical discharge for hot fumes extraction 72 ACCESSORIES INDUSTRIAL VENTILATION 28 VORTICENT C E RANGE Centrifugal fans with single-phase and three-phase AC motor, mounted on ball bearings combined with centrifugal metal forward-curved impellers 3

4 Practical steps towards saving energy Following ratification of the Kyoto Protocol, the European Commission launched the plan, which sets Member States the target of reducing energy consumption by 2% and increasing their share of renewable energies by 2% by 22. Directive 2/125/EC ErP (Energy-related Products) fis aimed at achieving these results. Its purpose is to limit the direct and indirect energy consumption of products placed on EU markets. It replaces Directive 25/32/CE EuP (Energy-using Products), cwhich referred to a smaller number of products, largely intended for private use. The ErP Directive is applied in a series of Regulations which establish, for each type of energy-consuming product or device, the minimum efficiency limit below which they are not eligible for CE marking and may not therefore be placed on the markets of Member States. These Regulations have the status of European Union laws. As such, they are not subject to the approval of national parliaments, and compliance with them is binding in the event of any conflict with national laws. A common feature of all the Regulations in question is the criterion used for their application: to facilitate their assimilation by manufacturers, the legislator has established a two-stage pathway, under which the final efficiency target is preceded, generally two years earlier, by an intermediate target intended to be easier and less costly to reach.

5 Vortice and its commitment to the ErP Directive The Regulations approved to date which affect Vortice products are summarised below.» EC Regulation N 1275/28, in force since January 21, which establishes the maximum consumption of electrical appliances in stand-by mode.» EC Regulation N 6/2, in force since August 2, which sets a minimum efficiency limit for all single-speed and three-phase electric motors having 2 to 6 poles and whose power rating is between 75 W and 375 kw. The Regulation does not apply to certain types of motor: motors which are fully integrated into a product (e.g. a fan), whose energy perfor mance cannot be tested independently of the product itself; motors designed specifically to operate at ambient air temperatures exceeding C; motors designed to operate in potentially explosive atmospheres (ATEX).» EU Regulation N 26/212, in force since January 213, which establishes the minimum energy efficiency requirements for CONDITIONERS with rated capacity of up to 12 kw, and requires that performance, energy consumption and sound power level be declared for COMFORT FANS with electric power input of up to 125 W.» EU Regulation N 66/21, in force since February 215, which establishes the minimum values of efficiency (energy and air flow) and average illumination on the cooking surface of RANGE HOODS FOR DOMESTIC USE.» EU Regulation N 327/211, in force since January 213, which sets a minimum efficiency limit on all fans (whether axial, centrifugal, cross flow or mixed flow fans, such as those in the VORTICEL E, VORTICEL A-E, VORTICEL MPC-E and VORTICENT C-E Series), whose electric input power at its optimum energy efficiency point is between 125 W and 5 kw. The Regulation does not apply to certain types of fan, including the following: cooling fans of electric motors; fans specifically designed to operate in potentially explosive atmospheres (E ATEX and C ATEX Series); fans designed for emergency use only, at short-time duty, with regard to fire safety requirements (such as those installed in the TORRETTE TR ED and TR ED-V Series); fans specifically designed to operate where the operating ambient temperature for the motor, if located outside the gas stream, driving the fan, exceeds 65 C (like those used in the TR E and TR E-V Seires). Compliance with the ErP Directive of fans placed on the markets of European Union Member States (the requirement obviously does not apply to devices intended for sale in countries outside the EU), is indicated by affixing the CE mark and, in the case of fans sold individually (i.e. not integrated into products of greater complexity), by the indication of a series of data, including maximum efficiency and the speed corresponding to maximum efficiency, which the manufacturer is required to publish in the respective technical documentation, on its publicly accessible web sites, and, in certain cases, on the fan itself. 5

6 In addition to the series listed above, EU Regulation N 327/211 also covers products such as our CA MD E in-line centrifugal extractor fans, VORT QBK, VORT QBK SAL, VORT QBK COMFORT and VORT QBK QUIET box fans, RF-EU EU extractor fans for roof application and VORT NRG, heat recovery units, whose fans must in turn meet the stipulated efficiency requirements (the requirement to make a declaration of efficiency that applies to fans does not apply to these appliances); These ranges will in turn be required to comply with a further Regulation, specifically designed to improve the energy efficiency levels of finished products. This Regulation is scheduled to come into force in January 216. The Commercial and Industrial range Vortice ErP 215 After the steps taken in 212 to bring the following series into line with regulatory requirements ahead of 215: - CA MD E, - CA ES, - CA V E, - CA WE D E - CA MD E RF, - CA MD E W, - VORTICEL E, Vortice completed the process of bringing the following series into line with 215 ErP requirements: - VORTICEL A-E, - VORTICEL MPC-E, - VORTICENT C-E The same process was also completed for the fans installed in the following series: - VORT QBK, - VORT QBK SAL, - VORT QBK COMFORT, - VORT QBK QUIET, - VORT NRG, - TORRETTE RF-EU. To simplify the management of the new appliances along the entire distribution chain, Vortice has decided to keep the respective part numbers unchanged, fand assume responsibility for issues con nected with managing the interim period. WARNING: THE OBLIGATIONS/RESTRICTIONS REFER ONLY TO MANUFACTURERS AND IMPORTERS, NOT WHOLESALE DISTRIBUTORS OF ELECTRICAL GOODS, RETAILERS, INSTALLERS OR END USERS. 6

7 TM LEGEND LEGEND ErP COMPLIANT - The ErP compliant logo indicates that the appliance is eco-compatible and adheres to ErP Directive 2/125/EC. Er DATA: under the terms of the regulatory framework, the energy efficiency data of fans with electric input power of between 125 W and 5 kw must be declared in all technical and commercial documentation, in addition to the electrical data and pressure/performance curves. Measurement cat. = test category (A; B; C; D) Efficiency cat. = efficiency category (Static - Total) Year of market release = year Variable drive = variable speed drive η = overall energy efficiency n. = efficiency grade (kw) Pe = electric input power at optimum energy efficiency point (m 3 /h) q = air flow at optimum energy efficiency point (Pa) p = pressure (Static - Total) at optimum energy efficiency point RPM = revolutions per minute at optimum energy efficiency point Rapp spec. <1. = specific ratio ENERGY SAVING - The ES label shows that the appliances are fitted with EC Brushless motors and therefore offer guaranteed energy savings, thanks to the wide range of speed regulation options and significantly reduced consumption levels. LONG LIFE 3. h VERSIONE LONG LIFE - The Long Life 3, h label certifies that the appliance is guaranteed to operate for 3, continuous hours without mechanical failure thanks to its motor, which is equipped with ball bearings. This special configuration allows the appliance to be run continuously, and ensures efficient, silent operation throughout its service life. HABITAT VERSIONE HABITAT - The Habitat label indicates that the product is suitable for ventilating small or medium domestic or commercial environments on a continuous or intensive basis with high performance and low energy consumption. This label means that the products are designed to offer energy savings by means of heat exchange between the inlet and outlet air flows in room ventilation systems, thereby combining comfort with a higher energy efficiency class. The IMQ logo denotes compliance with C.E.I product safety regulations, and this is certified by the Istituto Italiano del Marchio di Qualità. The IMQ logo denotes compliance with C.E.I product performance regulations, and this is certified by the Istituto Italiano del Marchio di Qualità. 7

8 CE MARKING Commercial Ventilation appliances conform to the following European Directives: 2/125/EC ErP Directive (ERP) //EC Atex Directive 26/5/EC Low Voltage Directive (LVD) 2/18/EC Electromagnetic Compatibility (EMC) According to the following state-of-the-art standards: Safety: EN 62-1, EN ISO 121-1, EN ISO 121-2, EN (onlytr-ed; TR ED-V), EN ISO 12, EN ISO Electromagnetic Compatibility: EN 551-1, EN 551-2, EN , EN Ecocompatible design of energy-related products: EU regulation N 327/211; EU regulation N 35/211 (EN ). 8

9 INDUSTRIAL VENTILATION INDUSTRIAL VENTILATION

10 INDUSTRIAL VENTILATION VORTICEL E RANGE Low pressure plate axial fans PRODUCT SPECIFICATIONS Suitable for commercial and industrial applications as garages, warehouses, gyms, dry cleaners, carpentry workshops, etc. LONG LIFE 3. h 7 models single-phase and 3 three-phase. Frames equipped with air intake with aerodynamic section, made using sheet steel protected with polyester paint. Class F ball bearing motors. Impellers with optimized blades profiles to reduce noise caused by turbulence, made of shock-proof polypropylene. All die-cast aluminium hubs. Protective grilles made of steel rings, black epoxy polyester. painted, removable for maintenance and cleaning purpose. Wide range of continuous operation temperatures between -25 C and +5/+7 C. Electric supply 22-2 V / 5 Hz for single phase models, V / 5 Hz for three phase models. Motor protection rating: IP. Insulation class: I.. Fans used in VORTICEL E range comply with ErP Lot. 6 Reg. N 327/211/UE. TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a) 3 m* C Max Kg E 252 M SINGLE-FASE THREE-FASE E 25 M E 3 M E 35 M E 25 T 356 E 3 T 556 E 35 T /.2./.23.32/.1.38/.22.3/.2.38/ * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode, in accordance with standard EN ISO 371:2. 1

11 VORTICEL E RANGE DIMENSIONS B C E G A B Ø D F Models Ø nom. A B C Ø D E Ø F G E E 25 E E Dimensions (mm) PRODUCT ACCESSORIES Models Description Code Product IRM 3 - Three position single-phase speed controller IRT 15 - Three position three-phase speed controller IREM 3 - Single-phase speed controller 1231 IREM 5 - Single-phase speed controller* IREM - Single-phase speed controller** DPU - Spacer for panel installation * Can control several fans up to a max of 5 A. ** Intended to simultaneously control appliances, up to a max of A. Description and sizes on page

12 INDUSTRIAL VENTILATION PERFORMANCE CURVES 11 E 252 M 1 1 3,6 E 25 M , p [Pa] ,8 1,22 p [Pa] , q [l/s] q [l/s] E 3 M E 35 M p [Pa] p [Pa] q [l/s] q [l/s] E 25 T E 3 T 2,6 2 63, , , ,77 1,18 p [Pa] ,88 1,2 p [Pa] ,5 6 13, q [l/s] q [l/s] 6 E 35 T 5 1 Consumption Delivery

13 NOTE NOTE 13

14 INDUSTRIAL VENTILATION E ATEX RANGE Low pressure plate axial fans PRODUCT SPECIFICATIONS Can be used in environments where the atmosphere might become explosive due to the presence of flammable substances in the form or gases and/or powders. LONG LIFE 3. h GAS 1 models. 5 single phase, three phase. 1 speed motors. Double-coated galvanised steel wire mesh over both outlet and inlet ports. Impeller withs aluminium hub and plastic blades. In single phase models condenser is housed in explosion-proofcasing. Painting consisting of protective base coat and polyurethane finishing paint. Airflow up to 6 m³/h. Constant operating temperature between -2 C and + C. Electric supply 23 V / 5 Hz for single phase models, V / 5 Hz for three phase models. Protection ratings: IP65. Insulation class: CI. I. ATEX certified asynchronous induction motors. Metal cable gland for ATEX certified electrical connection. ATEX certified for use in areas at risk of explosion due to gases and/or dust particles. IMQ 1 ATEX 2 X certified. GR II cat 2G/D b T/135 X. Constructed in compliance with EN 186 standards governing the design of fans operating in potentially explosive areas. TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a) a 3 m* C Max Kg E 25 M ATEX SINGLE-FASE E 3 M ATEX E 35 M ATEX E M ATEX E 5 M ATEX E 25 T ATEX E 3 T ATEX E 35 T ATEX THREE-FASE E T ATEX E 5 T ATEX E 5 T ATEX E 56 T ATEX E 6 T ATEX E 66 T ATEX

15 E ATEX RANGE DIMENSIONS A D G L C Ø H E F D B Ø Ø Models Ø nom A B C D Ø E Ø F G Ø H L E 25 ATEX E 3 ATEX E 35 ATEX E ATEX E 5 ATEX E 5 ATEX E 56 ATEX 361 E 6 ATEX E 66 ATEX Dimensions (mm) APPLICATIONS 15

16 INDUSTRIAL VENTILATION PERFORMANCE CURVES 1 E 25 M ATEX E 3 M ATEX p [Pa] p [Pa] q [l/s] q [l/s] E 35 M ATEX E M ATEX p [Pa] p [Pa] q [l/s] q [l/s] E 5 M ATEX E 25 T ATEX p [Pa] p [Pa] q [l/s] q [l/s] E 3 T ATEX E 35 T ATEX p [Pa] p [Pa] q [l/s] q [l/s] 16

17 SERIE E ATEX PERFORMANCE CURVES 15 E T ATEX E 5 T ATEX p [Pa] p [Pa] q [l/s] q [l/s] E 5 T ATEX E 56 T ATEX p [Pa] p [Pa] q [l/s] q [l/s] E 6 T ATEX E 66 T ATEX p [Pa] p [Pa] q [l/s] q [l/s] Consumption Delivery 17

18 INDUSTRIAL VENTILATION NEW VORTICEL A-E RANGE Compact plate axial fans PRODUCT SPECIFICATIONS Suitable for commercial and industrial applications environments as warehouses, hospitals, nightclubs, offices, theatres, factories, gyms, restaurants, etc. LONG LIFE 3. h 1 models single-phase and 1 three-phase. Phosphated sheet steel panels, painted with epoxy powder, in grey colour hammered finishing, resistant to atmospheric agents. Thermo-protected, class F, 1 speed, motors equipped with ball bearings. High aeraulic performance impellers with electro-galvanised. sheet steel blades, painted with polyester paint. Low noise levels. Motor holders blade acting an anti-bird guards, made of electro-welded steel rings black epoxy painted, easy to remove for maintenance. Wide range of continuous operation temperatures between -3 C and +5 C. Electric supply 23 V / 5 Hz for single phase models, V / 5 Hz for three phase models. Protection motor: IP5. Insulation class: I.. Fans used in VORTCEL A-E range comply with ErP Lot. 6 Reg. N 327/211/UE. TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lw db(a) Lp db(a)* 1-3 m C Max Kg A-E 252 M A-E 25 M A-E 3 M SINGLE-FASE THREE-FASE A-E 35 M A-E M A-E 5 M A-E 5 M A-E 56 M A-E 566 M A-E 25 T A-E 3 T A-E 35 T A-E T A-E 5 T A-E 5 T A-E 56 T A-E 56 T A-E 566 T A-E 636 T * Sound pressure level measured at 1-3 m in free field conditions with long-cased appliance in delivery mode, in accordance with standard EN ISO 371:2. 18

19 VORTICEL A-E RANGE ERP DATA DIRECTIVE N 327/211/UE (LOTTO 11, 1ST TIER) Models Code Measurement cat. Efficiency cat. Year of construction Variable drive η N. (kw) Pe (m 3 /h) q BEP* p Pa RPM Spec. ratio <1. A-E 35 M SINGLE-FASE A-E M A-E 5 M A-E 5 M A-E 56 M A-E 566 M A-E 35 T A STATIC NO A-E T YES THREE-PHASE A-E 5 T A-E 5 T A-E 56 T A-E 56 T A-E 566 T A-E 636 T * Best efficiency point. DIMENSIONS Models Nr. pale A Ø B C D E F Ø G A A-E 252 M F A-E 25 M A-E 25 T 1 8 G A-E 3 M A-E 3 T A-E 35 M A-E 35 T E C D A-E M A-E T A-E 5 M A-E 5 T A-E 5 M A-E 5 T B A-E 56 M 7 A-E 56 T A-E 56 T A-E 566 M A-E 566 T A-E 636 T Dimensions (mm) 1

20 INDUSTRIAL VENTILATION PRODUCT ACCESSORIES Models Description Code Product IRM 3 - Three position single-phase speed controller IRT 15 - Three position three-phase speed controller IRT 35 - Three-phase variable voltage drive IREM 3 - Single-phase speed controller C Electronic speed controller DPU - Spacer for panel installation Description and sizes on page 162 PERFORMANCE CURVES A-E 252 M A-E 25 M A-E 3 M A-E 35 M

21 VORTICEL A-E RANGE PERFORMANCE CURVES 18 A-E M A-E 5 M A-E 5 M A-E 56 M A-E 566 M A-E 25 T A-E 3 T A-E 35 T

22 INDUSTRIAL VENTILATION PERFORMANCE CURVES 28 A-E T A-E 5 T A-E 5 T A-E 56 T A-E 56 T A-E 566 T A-E 636 T Consumption Delivery

23 NOTE NOTE 23

24 INDUSTRIAL VENTILATION NEW VORTICEL MPC-E RANGE Medium-pressure long cased axial fans PRODUCT SPECIFICATIONS Suitable for commercial and industrial application as warehouses, farm buildings, greenhouses and underground car parks, for extraction into a ventilation duct or directly outdoors. 1 models 5 single-phase and 5 three-phase. Structures consisting of two flanged parts, held together by screws, allowing connection to standardised pipes. Single-phase and three-phase class F, ball bearings motors complete with highly efficient impellers. Steel motor support protected by black epoxy polyester paint. Wide range of continuous operation temperatures between -25 C and +7 C; -25 C and +5 C for M model. Electric supply 23 V / 5 Hz for single-phase models and V / 5 Hz for three-phase models. Protection rating: IPX. Insulation class: I.. Fans used in VORTICEL MPC-E range comply with ErP Lot. 6 Reg. N 327/211/UE. LONG LIFE 3. h TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lw db(a) Lp db(a)* 3 m C Max Kg MPC-E 25 M SINGLE-FASE THREE-SINGLE MPC-E 32 M MPC-E 3 M MPC-E 35 M MPC-E M MPC-E 25 T MPC-E 32 T MPC-E 3 T MPC-E 35 T MPC-E T * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode, in accordance with standard EN ISO 371:2. 2

25 VORTICEL MPC-E RANGE ERP DATA DIRECTIVE N 327/211/UE (LOTTO 11, 1ST TIER) Models Code Measurement cat. Efficiency cat. Year of construction Variable drive η N. (kw) Pe (m 3 /h) q BEP* p Pa RPM Spec. ratio <1. MPC-E 32 M SINGLE-FASE MPC-E 35 M MPC-E M C STATIC 215 NO YES MPC-E 32 T THREE-FASE MPC-E 35 T DIMENSIONS A C G D B MPC-E T * Best efficiency point. H E F Models Ø A Ø B C Ø D E F G H MPC-E MPC-E MPC-E 3 33 MPC-E MPC-E Dimensions (mm) 25

26 INDUSTRIAL VENTILATION PRODUCT ACCESSORIES Models Description Code Product IRM 3 - Three-position single-phase speed controller IRM - Three-position single-phase speed controller IRT 15 - Three-position single-phase speed controller IREM 3 - Single-phase speed controller IRET 6 - Three-phase speed controller MPC BO - Suction connector MPC RA - Flexible connector MPC SU - Mounting feet MPC FL - Coupling flange MPC RP - Protection grille Description and sizes on page 162 PERFORMANCE CURVES MPC-E 25 M MPC-E 32 M

27 VORTICEL MPC-E RANGE PERFORMANCE CURVES Consumption Delivery 7 MPC-E 3 M MPC-E 35 M MPC-E M MPC-E 25 T MPC-E 32 T 81 7 MPC-E 3 T MPC-E 35 T MPC-E T

28 INDUSTRIAL VENTILATION NEW VORTICENT C E RANGE Centrifugal fans PRODUCT SPECIFICATIONS Suitable for residential, commercial and industrial applications as kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars, theatres, ballrooms, etc. 21 models, including single phase and 12 three phase. Sheet steel scroll with epoxy resin powder coated finish, and fixing holes configured to allow alignment of the motor in 8 different positions relative to the outlet port. Class F asynchronous motors, with shafts mounted on ball bearings. High efficiency forward blade centrifugal impellers made of zinc-coated steel; easy removal of fan for maintenance and cleaning purposes, even when permanently installed. Continuous operating temperature between 25 C and +5 C. Protection rating: IP55. Insulation class: I.. Fans used in VORTICENT C E range comply with ErP Lot. 6 Reg. N 327/211/UE. TECHNICAL DATA SINGLE-FASE THREE-FASE Models Code V ~ 5 Hz W A Poles RPM C 1/2 M Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a)* 3 m * C 15/2 M * 5. C 2/2 M E ** 6. C 25/2 M E ** 6.8 C 3/2 M E ** 8. C 3/ M E C 35/ M E ** C 37/ M E ** 2.5 C 1/2 T / *.6 23/ 5 C 15/2 T / * 3.3 C Max **. C / M E ** 21. C 2/2 T E ** 5.8 C 25/2 T E ** 6.3 C 3/2 T E ** C 3/ T E ** C 31/ T E ** C 35/ T E C 37/ T E ** 2.5 C / T E ** 21.5 C 5/ T E ** 23.3 C 6/ T E ** Kg * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode, in accordance with standard EN ISO 371. ** Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode, in accordance with standard EN ISO

29 F F VORTICENT C E RANGE ERP DATA DIRECTIVE N 327/211/UE (LOTTO 11, 1ST TIER) Models Code Measurement cat. Efficiency cat. Year of construction Variable drive η N. (kw) Pe (m 3 /h) q BEP* p Pa RPM Spec. ratio <1. * Best efficiency point. C 1 C 5 C 6 C E H A C M G L D G P B P B D L SINGLE-FASE THREE-FASE C 2/2 M E C 25/2 M E C 3/2 M E C 35/ M E C 37/ M E C / M E C 2/2 T E B TOTAL NO C 25/2 T E C 3/2 T E C 35/ T E C 37/ T E C / T E C 5/ T E C 6/ T E YES DIMENSIONS N Q R M N Q H E R A Models A B C D E F G H L Ø M N P Q R C 1/2 M-T* C 15/2 M-T* C 2/2 E M-T* C 25/2 E M* C 25/2 E T* C 3/2 E M-T* C 3/ E M-T* C 31/ E T** C 35/ E M** C 35/ E T** C 37/ E M-T** C / E M-T** C 5/ E T** Dimensions (mm) * Equipment supplied with scroll oriented counterclockwise (CCW) when seen from the opposite side of air intake LG. ** Equipment supplied with scroll oriented counterclockwise (CCW) when seen from the opposite side of air intake LG 27. Models A B C D E F G H L Ø M N P Q R C 6/ E** Dimensions (mm) 2

30 INDUSTRIAL VENTILATION PERFORMANCE CURVES Air intanke Delivery oulet D A B C D E F C B A G Models Ø A Ø B Ø C Ø D n holes C C Models A B C D E F Ø G n holes C C C 2 C C C C C C C C C.6 8 C C C C C C Dimensions (mm) C C Dimensions (mm) Orientation 135 The position of a radial fan delivery outlet is represented by a direction of rotation symbol (LG - that is, towards the left or anti-clockwise, looking from the side opposite the air intake inlet) and the angle (in degrees) of the delivery outlet to the reference axis (a straight line perpendicular to the base plane, passing through the axis of rotation), measured in the direction of rotation. Designation of delivery outlet position for radial fans. Adjacent example: LG 135 LG LG LG 5 LG LG 135 LG 18 LG 225 LG 27 LG 315 3

31 VORTICENT C E RANGE PERFORMANCE CURVES Models Description Code Product / C RA - Raccordo flangiato aspirazione 31/ / C MS - Supporto motore 31/ / C GM - Griglia protezione mandata / C GA - Griglia protezione aspirazione / / Description and sizes on page

32 INDUSTRIAL VENTILATION PERFORMANCE CURVES 26 C 1/2 M C 15/2 M C 2/2 M C 25/2 M q [l/s] q [l/s] 76 C 3/2 M C 3/ M C 35/ M C 37/ M

33 VORTICENT C E RANGE PERFORMANCE CURVES 5 C / M C 1/2 T q [l/s] C 15/2 T C 2/2 T C 25/2 T C 3/2 T C 3/ T C 31/ T q [l/s] 33

34 INDUSTRIAL VENTILATION PERFORMANCE CURVES 32 C 35/ T C 37/ T q [l/s] C / T C 5/ T C 6/ T Consumption Delivery

35 NOTE NOTE 35

36 INDUSTRIAL VENTILATION C ATEX RANGE Centrifugal fans for installation in potentially explosive areas PRODUCT SPECIFICATIONS Suitable for installation in environments (home, commercial and industrial) where potentially explosive atmospheres can be expected, such as battery charging bays, or industrial process areas. LONG LIFE 3. h GAS models three-phase. One speed. Double-coated sheet-steel frames with spiral housings. Brushed copper nozzles. Double-coated galvanised steel wire mesh over the inlet port. Aluminium centrifugal impeller with front blades and die-cast aluminium hub. Painting consisting of protective base coat and polyurethane finishing paint. Airflow up to 215 m³/h. High pressures over 8 Pa. Constant operating temperature between -2 C and + C. Electric supply V / 5 Hz Protection ratings: IP65. Insulation class: I.. ATEX certified asynchronous induction motors. Metal cable gland for ATEX certified electrical connection. ATEX certified for use in areas at risk of explosion due to gases and/or dust particles. IMQ 1 ATEX 2 X certified. GR II cat 2G/D b T/135 X. Constructed in compliance with EN 186 standards governing the design of fans operating in potentially explosive areas. TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a)* 3 m C Max Kg C 1/2 T ATEX C 15/2 T ATEX THREE-FASE C 2/2 T ATEX C 25/2 T ATEX C 3/2 T ATEX C 3/ T ATEX C 31/ T ATEX C 35/ T ATEX C 37/ T ATEX

37 C ATEX RANGE DIMENSIONS C E H F A G B D L ø M Models A B C D E F G H L Ø M C 1/2 T ATEX C 15/2 T ATEX C 2/2 T ATEX C 25/2 T ATEX C 3/2 T ATEX C 3/ T ATEX C 31/ T ATEX C 35/ T ATEX 17 1 C 37/ T ATEX Dimensions (mm) APPLICATIONS 37

38 INDUSTRIAL VENTILATION PERFORMANCE CURVES C 1/2 T ATEX C 15/2 T ATEX p [Pa] p [Pa] q [l/s] q [l/s] 5 C 2/2 T ATEX C 25/2 T ATEX p [Pa] p [Pa] q [l/s] q [l/s] C 3/2 T ATEX C 3/ T ATEX p [Pa] p [Pa] q [l/s] q [l/s] 3 C 31/ T ATEX C 35/ T ATEX p [Pa] p [Pa] q [l/s] q [l/s] 38

39 C ATEX RANGE PERFORMANCE CURVES C 37/ T ATEX p [Pa] q [l/s] Consumption Delivery 3

40 INDUSTRIAL VENTILATION TORRETTE RF-EU RANGE Centrifugal roof fans with horizontal discharge PRODUCT SPECIFICATIONS Suitable for residential and industrial applications as factories, hospitals, nightclubs, offices, theatres, apartment blocks, gyms, restaurants, etc. Easy to install on top of all roofs. LONG LIFE 3. h 17 models 6 single-phase e 11 three-phase. Thermo-protected, class F external rotor motors equipped with ball bearings. Centrifugal impellers, plastic or aluminium made with self-cleaning backward-curved blades. Sheet steel motor covers, pickled and phosphated with polyester powder coated finish, colour metallic grey. Protective safety and bird-stop grilles, made of electrically welded steel rings with galvanizing treatment. Protection rating motor IP (models M1, M15, M2, T1, T15); IP5 (models M3, M5, M7, T2, T3, T5, T7, T1 P-6P-8P, T15 6P). Operating temperatures: -15 C to + C for models T1, T2, T7 6P, T1 6P; -2 C to + C for models M3, M5, M7, T15, T3, T5, T7 P, T1 P, T1 8P, T15; -3 C a + C for models M1, M15, M2. Insulation class: I.. Fans used in TORRETTE RF-EU range comply with ErP Lot. 6 Reg. N 327/211/UE. TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a)* 3 m C Max Kg RF-EU M1 P MONO-FASE RF-EU M15 P RF-EU M2 P RF-EU M3 P RF-EU M5 P RF-EU M7 P RF-EU T1 P RF-EU T15 P RF-EU T2 P THREE-FASE RF-EU T3 P RF-EU T5 P RF-EU T7 P RF-EU T7 6P RF-EU T1 P RF-EU T1 6P RF-EU T1 8P RF-EU T15 6P

41 TORRETTE RF-EU RANGE DIMENSIONS A E F D G H C B Models Ø A B C Ø D E F Ø G H RF-EU M1 P RF-EU M15 P RF-EU M2 P RF-EU M3 P RF-EU M5 P RF-EU M7 P RF-EU T1 P RF-EU T15 P RF-EU T2 P RF-EU T3 P RF-EU T5 P RF-EU T7 P RF-EU T7 6P RF-EU T1 P 5 56 RF-EU T1 6P RF-EU T1 8P RF-EU T15 6P Dimensions (mm) 1

42 INDUSTRIAL VENTILATION PRODUCT ACCESSORIES Models Description Code Product IRM 3 - Three position single-phase speed controller IRM - Three position single-phase speed controller IRM 5 - Three position single-phase speed controller IRT 15 - Three position three-phase speed controller IRT 35 - Three position three-phase speed controller IRT - Three position three-phase speed controller IREM 3 - Single-phase speed controller IREM 5 - Single-phase speed controller IREM - Single-phase speed controller * IRET 6 - Three-phase speed controller C Electronic speed controller 1.5 A IREM INVERTER M IREM INVERTER 6 M IRET INVERTER 2.5 M IRET INVERTER 2.5 M POTENZIOMETRO POTI 1K IP per i codici / TR-CU - Controtelaio di base 2/3/ / /3/ TR-S - Backdraught shutter 7/ /15/18/ /3/ TR-B - Suction connector 7/ /15/18/ /3/ TR-G - Protection grille 7/ /15/18/ * Used for simultaneous control of multiple appliances up to a maximum A. Description and sizes on page 162 2

43 TORRETTE RF-EU RANGE PERFORMANCE CURVES 18 RF-EU M1 P RF-EU M15 P RF-EU M2 P RF-EU M3 P RF-EU M5 P RF-EU M7 P RF-EU T1 P RF-EU T15 P

44 INDUSTRIAL VENTILATION PERFORMANCE CURVES 36 RF-EU T2 P RF-EU T3 P RF-EU T5 P RF-EU T7 P RF-EU T7 6P RF-EU T1 P RF-EU T1 6P RF-EU T1 8P

45 TORRETTE RF-EU RANGE PERFORMANCE CURVES 5 RF-EU T15 6P Consumption Delivery 5

46 INDUSTRIAL VENTILATION TORRETTE TR E RANGE Centrifugal roof fans for radial blast PRODUCT SPECIFICATIONS Suitable for application in residential and industrial environments, for factories, hospitals, nightclubs, offices, theatres, apartment blocks, gyms, restaurants, etc. Easy to install on top of all roofs. LONG LIFE 3. h 2 models 6 single-phase and 1 three-phase. Metal frames coated in corrosion-proof epoxy resin to assure long life and weather resistance. Aerodynamic suction nozzles in polyester painted steel sheet. All models fitted with steel bird guard. Self-ventilated motors equipped with ball bearings, standard sizes UNELMEC B5. Galvanised steel sheet fans with self cleaning, backward curved blades, die cast aluminium hubs. Single phase models can be controlled by an optional speed controller. Alternatively they can be controlled by means of optional inverters. Max airflow up to 18. m 3 /h. Motor insulation class H for models 1525, 1573, 1576, 1578, 157; F for all other models. Protection rating: IP55. Insulation class: I.. Fans used in TORRETTE TR E range comply with ErP Lot. 6 Reg. N 327/211/UE. TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a)* 3 m C Max Kg MONOFASE TRIFASE TRM 1 E P TRM 15 E P TRM 2 E P TRM 3 E P TRM 5 E P TRM 7 E P TRT 1 E P TRT 15 E P TRT 2 E P TRT 3 E P TRT 5 E P TRT 7 E P TRT 7 E 6P TRT 1 E P TRT 1 E 6P TRT 1 E 8P TRT 15 E 6P TRT 15 E 8P TRT 18 E 6P TRT 21 E 6P The sound pressure values conform to standard ISO 37. The appliances are designed so that they are able to operate at an air temperature more than 65 C. 6

47 TORRETTE TR E RANGE DIMENSIONS A E BLADE H D F L ext M int N G C B 11 G Models Ø A B C D E F G H Ø L Ø M Ø N TR 1 E P TR 15 E P TR 2 E P TR 3 E P TR 5 E P TR 7 E P TR 7 E 6P TR 1 E P TR 1 E 6P TR 1 E 8P TR 15 E 6P TR 15 E 8P TR 18 E 6P TR 21 E 6P Dimensions (mm) 7

48 INDUSTRIAL VENTILATION PRODUCT ACCESSORIES Models Description Code Product IRM 3 - Three position single-phase speed controller IRM - Three position single-phase speed controller IRM 5 - Three position single-phase speed controller IRT 15 - Three position three-phase speed controller IRT 35 - Three position three-phase speed controller IRT - Three position three-phase speed controller IREM 3 - Single-phase speed controller IREM 5 - Single-phase speed controller* IREM - Single-phase speed controller ** IRET 6 - Three-phase speed controller IREM INVERTER 1. - Single-phase speed controller INVERTER IREM INVERTER.2 - Single-phase speed controller INVERTER IREM INVERTER 7 - Single-phase speed controller INVERTER IRET INVERTER Three-phase speed controller INVERTER IRET INVERTER Three-phase speed controller INVERTER IRET INVERTER 5 - Three-phase speed controller INVERTER IRET INVERTER 5 - Three-phase speed controller INVERTER / TR-CU - Sub-frame 2/3/ / /15/18/ / TR-S - Backdraught shutter 2/3/ / /15/18/ / TR-B - Suction connector 2/3/ / /15/18/ / TR-G - Protection grille 2/3/ / /15/18/ * Can control multiple fans up to a maximum 5A. ** Used for simultaneous control of multiple appliances up to a maximum A. Description and sizes on page 162 8

49 TORRETTE TR E RANGE PERFORMANCE CURVES 22 TRM 1 E P TRM 15 E P TRM 2 E P TRM 3 E P TRM 5 E P TRM 7 E P TRT 1 E P TRT 15 E P

50 INDUSTRIAL VENTILATION PERFORMANCE CURVES 37 TRT 2 E P TRT 3 E P TRT 5 E P TRT 7 E P TRT 7 E 6P TRT 1 E P TRT 1 E 6P TRT 1 E 8P

51 TORRETTE TR E RANGE PERFORMANCE CURVES 5 TRT 15 E 6P TRT 15 E 8P TRT 18 E 6P TRT 21 E 6P Consumption Delivery 51

52 INDUSTRIAL VENTILATION TORRETTE TR E-V RANGE Centrifugal roof fans for vertical blast PRODUCT SPECIFICATIONS Suitable for residential and industrial applications as factories, hospitals, nightclubs, offices, theatres, apartment blocks, gyms, restaurants, etc. Easy to install on top of all roofs. LONG LIFE 3. h 2 modells 6 single-phase and 1 three-phase. Max airflow up to 15 m 3 /h. Vertical air extraction with polyester painted, galvanised steel reinforcements. Metal frames coated in corrosion-proof epoxy resin to assure long life and weather resistance. Aerodynamic suction nozzles in polyester painted steel sheet. All models fitted with steel bird guards. Self-ventilated motors equipped with ball bearings, standard sizes UNELMEC B5. Galvanised steel sheet fans with self cleaning, backward curved blades, die casted aluminium hubs. Single phase models can be controlled by an optional speed controller. Alternatively they can be controlled by means of optional inverters. Max airflow up to 18. m 3 /h. Motor insulation class H for models 15182, 151, 1513, 1515, 1516; F for all other models. Protection rating: IP55. Insulation class: I.. Fans used in TORRETTE TR E-V range comply with ErP Lot. 6 Reg. N 327/211/UE. TECHNICAL DATA SINGLE-FASE THREE-FASE Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a)* 3 m TRM 1 E-V P TRM 15 E-V P TRM 2 E-V P TRM 3 E-V P TRM 5 E-V P TRM 7 E-V P TRT 1 E-V P TRT 15 E-V P TRT 2 E-V P TRT 3 E-V P TRT 5 E-V P TRT 7 E-V P TRT 7 E-V 6P TRT 1 E-V P TRT 1 E-V 6P TRT 1 E-V 8P TRT 15 E-V 6P TRT 15 E-V 8P TRT 18 E-V 6P TRT 21 E-V 6P C Max Kg The sound pressure values conform to standard ISO 37. The appliances are designed so that they are able to operate at an air temperature more than 65 C. 52

53 TORRETTE TR E-V RANGE DIMENSIONS G F E H AxA CxC G BxB DxD Models Ø A B C D E F G H Ø L Ø M Ø N Ø Q TR 1 E-V P TR 15 E-V P TR 2 E-V P TR 3 E-V P TR 5 E-V P TR 7 E-V P TR 7 E-V 6P TR 1 E-V P 5 TR 1 E-V 6P TR 1 E-V 8P 65 TR 15 E-V 6P TR 15 E-V 8P TR 18 E-V 6P TR 21 E-V 6P Dimensions (mm) 53

54 INDUSTRIAL VENTILATION PRODUCT ACCESSORIES Models Description Code Product IRM 3 - Three position single-phase speed controller IRM - Three position single-phase speed controller IRM 5 - Three position single-phase speed controller IRT 15 - Three position three-phase speed controller IRT 35 - Three position three-phase speed controller IRT - Three position three-phase speed controller IREM 3 - Single-phase speed controller IREM 5 - Single-phase speed controller* IREM - Single-phase speed controller ** IRET 6 - Three-phase speed controller IREM INVERTER 1. - Single-phase speed controller INVERTER IREM INVERTER.2 - Single-phase speed controller INVERTER IREM INVERTER 7 - Single-phase speed controller INVERTER IRET INVERTER Three-phase speed controller INVERTER IRET INVERTER Three-phase speed controller INVERTER IRET INVERTER 5 - Three-phase speed controller INVERTER IRET INVERTER 5 - Three-phase speed controller INVERTER / TR-CU - Sub-frame 2/3/ / /15/18/ / TR-S - Backdraught shutter 2/3/ / /15/18/ / TR-B - Suction connector 2/3/ / /15/18/ / TR-G - Protection grille 2/3/ / /15/18/ * Can control multiple fans up to a maximum 5A. ** Used for simultaneous control of multiple appliances up to a maximum A. Description and sizes on page 162 5

55 TORRETTE TR E-V RANGE PERFORMANCE CURVES 22 TRM 1 E-V P TRM 15 E-V P TRM 2 E-V P TRM 3 E-V P TRM 5 E-V P TRM 7 E-V P TRT 1 E-V P TRT 15 E-V P

56 INDUSTRIAL VENTILATION PERFORMANCE CURVES 37 TRT 2 E-V P TRT 3 E-V P TRT 5 E-V P TRT 7 E-V P TRT 7 E-V 6P TRT 1 E-V P TRT 1 E-V 6P TRT 1 E-V 8P

57 TORRETTE TR E-V RANGE PERFORMANCE CURVES 5 TRT 15 E-V 6P TRT 15 E-V 8P TRT 18 E-V 6P TRT 21 E-V 6P Consumption Delivery 57

58 INDUSTRIAL VENTILATION TORRETTE TR ED RANGE Centrifugal roof fans for radial blast for hot fumes extraction PRODUCT SPECIFICATIONS Suitable for mounting on flat roofs of commercial, industrial buildings and blocks of flats, etc. LONG LIFE 3. h 2 models 6 single-phase anbd 1 three-phase. All models fitted with steel bird guards. Class, self ventilated motors equipped with ball bearings, standars sizes UNLMEC B5. Galvanised steel sheet fans with self cleaning, backward curved blades, die casted aluminium hubs. Streamlined cross-section intake port, made of polyestere painted steel. For long term safety each unit has a safety cable to anchor it to the base. Max airflow up to 18. m 3 /h. Motors insulation class H. Protection rating: IP55. Insulation class: I.. The usage is admitted also in ambient temperature between -25 C and + C only in countries where the N 327/211/UE European Regulation is not recognized. Minimum speed operation is admitted for products used for cold air treatment (fans not intended for hot fumes C / 2h aspiration) in countries that do not adhere to N 327/211/UE European Regulation. 58

59 TORRETTE TR ED RANGE TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a)* 3 m C Max Kg TRM 1 ED P SINGLE-FASE TRM 15 ED P TRM 2 ED P TRM 3 ED P TRM 5 ED P THREE-FASE TRM 7 ED P TRT 1 ED P 15 TRT 15 ED P 152 TRT 2 ED P 155 TRT 3 ED P 157 TRT 5 ED P 15 TRT 7 ED P 1581 TRT 7 ED 6P 1582 TRT 1 ED P 1583 TRT 1 ED 6P 158 TRT 1 ED 8P 1585 TRT 15 ED 6P 1586 TRT 15 ED 8P C/2h TRT 18 ED 6P TRT 21 ED 6P The sound pressure values conform to standard ISO 37. DIMENSIONS Models Ø A B C D E F G H Ø L Ø M Ø N G D E TR 1 ED P TR 15 ED P TR 2 ED P TR 3 ED P TR 5 ED P F TR 7 ED P TR 7 ED 6P TR 1 ED P TR 1 ED 6P 15 TR 1 ED 8P TR 15 ED 6P TR 15 ED 8P TR 18 ED 6P H C B H TR 21 ED 6P Quote (mm) 5

60 INDUSTRIAL VENTILATION PRODUCT ACCESSORIES USE IN CONJUNCTION WITH APPLIANCES HAVING SPEED SELECTORS OR CONTROLLERS IS NOT PERMITTED IN COUNTRIES IMPLEMENTING EUROPEAN REGULATION 327/211/EU. Models Description Code Product IRM 3 - Three position single-phase speed controller IRM - Three position single-phase speed controller IRM 5 - Three position single-phase speed controller IRT 15 - Three position three-phase speed controller IRT 35 - Three position three-phase speed controller IRT - Three position three-phase speed controller IREM 3 - Single-phase speed controller IREM 5 - Single-phase speed controller* IREM - Single-phase speed controller ** IRET 6 - Three-phase speed controller IRET INVERTER Three-phase speed controller INVERTER IRET INVERTER Three-phase speed controller INVERTER IRET INVERTER 5 - Three-phase speed controller INVERTER IRET INVERTER 5 - Three-phase speed controller INVERTER / TR-CU - Sub-frame 2/3/ / /15/18/ / TR-G - Protection grille 2/3/ / /15/18/ * Can control multiple fans up to a maximum 5A. ** Used for simultaneous control of multiple appliances up to a maximum A. Description and sizes on page 162 6

61 TORRETTE TR ED RANGE PERFORMANCE CURVES 2 TRM 1 ED P TRM 15 ED P TRM 2 ED P TRM 3 ED P TRM 5 ED P TRM 7 ED P TRT 1 ED P TRT 15 ED P

62 INDUSTRIAL VENTILATION PERFORMANCE CURVES 3 TRT 2 ED P TRT 3 ED P TRT 5 ED P TRT 7 ED P TRT 7 ED 6P TRT 1 ED P TRT 1 ED 6P TRT 1 ED 8P

63 TORRETTE TR ED RANGE PERFORMANCE CURVES TRT 15 ED 6P TRT 15 ED 8P TRT 18 ED 6P TRT 21 ED 6P Consumption Consumption Delivery Delivery 63

64 INDUSTRIAL VENTILATION TORRETTE TR ED-V RANGE Centrifugal roof fans with vertical discharge for hot fumes extraction PRODUCT SPECIFICATIONS Suitable for commercial and industrial applications as industrial buildings, blocks of flats, etc. LONG LIFE 3. h 2 models 6 single-phase and 1 three-phase. All models fitted with steel bird guards. Class, self ventilated motors equipped with ball bearings, standars sizes UNLMEC B5. Galvanised steel sheet fans with self cleaning, backward curved blades, self-ventilating, die casted aluminium hubs. Streamlined cross-section intake ports, made of polyestere steel painted. For long term safety each unit has a safety cable to anchor it to the base. Max airflow up to 18. m 3 /h. Protection rating: IP55. Insulation class: I.. The usage is admitted also in ambient temperature between -25 C and + C only in countries where the N 327/211/UE European Regulation is not recognized. Minimum speed operation is admitted for products used for cold air treatment (fans not intended for hot fumes C / 2h aspiration) in countries that do not adhere to N 327/211/UE European Regulation. 6

65 TORRETTE TR ED-V RANGE TECHNICAL DATA Models Code V ~ 5 Hz W A Poles RPM Max Airflow Max Pressure m 3 /h l/s mmh 2 O Pa Lp db(a)* 3 m C Max Kg TRM 1 ED-V P SINGLE-FASE THREE-FASE TRM 15 ED-V P TRM 2 ED-V P TRM 3 ED-V P TRM 5 ED-V P TRM 7 ED-V P TRT 1 ED-V P TRT 15 ED-V P TRT 2 ED-V P TRT 3 ED-V P TRT 5 ED-V P 1516 C/2h TRT 7 ED-V P TRT 7 ED-V 6P TRT 1 ED-V P TRT 1 ED-V 6P TRT 1 ED-V 8P TRT 15 ED-V 6P TRT 15 ED-V 8P TRT 18 ED-V 6P TRT 21 ED-V 6P The sound pressure values conform to standard ISO 37. DIMENSIONS Models Ø A B C D E F G H Ø L Ø M Ø N Ø Q H TR 1 ED-V P TR 15 ED-V P E TR 2 ED-V P F TR 3 ED-V P TR 5 ED-V P DxD TR 7 ED-V P TR 7 ED-V 6P TR 1 ED-V P AxA CxC G BxB TR 1 ED-V 6P TR 1 ED-V 8P TR 15 ED-V 6P TR 15 ED-V 8P TR 18 ED-V 6P G TR 21 ED-V 6P Dimensions (mm) 65

66 INDUSTRIAL VENTILATION PRODUCT ACCESSORIES USE IN CONJUNCTION WITH APPLIANCES HAVING SPEED SELECTORS OR CONTROLLERS IS NOT PERMITTED IN COUNTRIES IMPLEMENTING EUROPEAN REGULATION 327/211/EU. Models Description Code Product IRM 3 - Three position single-phase speed controller IRM - Three position single-phase speed controller IRM 5 - Three position single-phase speed controller IRT 15 - Three position three-phase speed controller IRT 35 - Three position three-phase speed controller IRT - Three position three-phase speed controller IREM 3 - Single-phase speed controller IREM 5 - Single-phase speed controller* IREM - Single-phase speed controller ** IRET 6 - Three-phase speed controller IRET INVERTER Three-phase speed controller INVERTER IRET INVERTER Three-phase speed controller INVERTER IRET INVERTER 5 - Three-phase speed controller INVERTER IRET INVERTER 5 - Three-phase speed controller INVERTER / TR-CU - Sub-frame 2/3/ / /15/18/ / TR-G - Protection grille 2/3/ / /15/18/ * Can control multiple fans up to a maximum 5A. ** Used for simultaneous control of multiple appliances up to a maximum A. Description and sizes on page

67 TORRETTE TR ED-V RANGE PERFORMANCE CURVES 1 TRM 1 ED-V P TRM 15 ED-V P TRM 2 ED-V P TRM 3 ED-V P TRM 5 ED-V P TRM 7 ED-V P TRT 1 ED-V P TRT 15 ED-V P

68 INDUSTRIAL VENTILATION PERFORMANCE CURVES 3 TRT 2 ED-V P TRT 3 ED-V P TRT 5 ED-V P 68 TRT 7 ED-V P TRT 7 ED-V 6P TRT 1 ED-V P TRT 1 ED-V 6P TRT 1 ED-V 8P 68

69 TORRETTE TR ED-V RANGE PERFORMANCE CURVES 6 TRT 15 ED-V 6P TRT 15 ED-V 8P TRT 18 ED-V 6P TRT 21 ED-V 6P Consumption Consumption Delivery Delivery 6

70 INDUSTRIAL VENTILATION CERTIFICATION C/2h DECLARATION DICHIARAZIONE OF PERFORMANCE DI PRESTAZIONE CE VORTICE ELETTROSOCIALI S.p.A Strada Cerca, 2 - frazione di Zoate 267 TRIBIANO Milano, Italy hereby dichiara declares che that la prestazione the performance dei prodotti: of products: Modello Codice Code Ente Notified Notificato Body Modello Codice Code Ente Notified Notificato Body TRM 1 ED P 153 TÜV TRT 1 ED P 15 TÜV TRM 15 ED P 151 TÜV TRT 15 ED P 152 TÜV TRM 2 ED P 153 TÜV TRT 2 ED P 155 TÜV TRM 3 ED P 156 TÜV TRT 3 ED P 157 TÜV TRM 5 ED P 158 TÜV TRT 5 ED P 15 TÜV TRM 7 ED P 158 TÜV TRT 7 ED P 1581 TÜV TRT 7 ED 6P 1582 TÜV TRT 1 ED P 1583 TÜV TRT 1 ED 6P 158 TÜV TRT 1 ED 8P 1585 TÜV TRT 15 ED 6P 1586 TÜV TRT 15 ED 8P 1587 TÜV TRT 18 ED 6P 151 APPLUS TRT 21 ED 6P 152 APPLUS TRM 1 ED-V P 1516 APPLUS TRT 1 ED-V P APPLUS TRM 15 ED-V P APPLUS TRT 15 ED-V P APPLUS TRM 2 ED-V P 1516 APPLUS TRT 2 ED-V P APPLUS TRM 3 ED-V P APPLUS TRT 3 ED-V P APPLUS TRM 5 ED-V P APPLUS TRT 5 ED-V P 1516 APPLUS TRM 7 ED-V P 1517 APPLUS TRT 7 ED-V P APPLUS TRT 7 ED-V 6P APPLUS TRT 1 ED-V P APPLUS TRT 1 ED-V 6P 1517 APPLUS TRT 1 ED-V 8P APPLUS TRT 15 ED-V 6P APPLUS TRT 15 ED-V 8P APPLUS TRT 18 ED-V 6P APPLUS TRT 21 ED V-6P 1517 APPLUS used for utilizzati the evacuation per l evacuazione of fumes and di fumo heat, e iscalore as follows: è : Essential Caratteristiche characteristics essenziali Performance Prestazione Harmonised Norma armonizzata standard CC for per auna duration durata ofdi minutes minuti F verified verificata by thedai following seguenti European Enti Europei Notified Notificati: Bodies: TÜV SÜD INDUSTRIE SERVICE GMBH MÜNCHEN : Certification Body N 36 N Certificate Certificato: No.: 36 CPD RG CPD RG CPD RG CPD RG3 APPLUS- LGAI TECHNOLOGICAL CENTRE SA : Certification Body N 37 Certificate N Certificato: No.: 37 CPD CPD 861 Smoke and heat control system Specification for powered smoke and heat exhaust ventilators EN (22)+AC(25) The La verifica consistent della performance costanza della of the prestazione above products dei prodotti is guaranteed sopra elencati by a Grade è garantita 1 system, da un insistema accordance di grado with1, appendix secondo l allegato V of European V del Regolamento Regulation No. Europeo 35/211 N (EU). 35/211 (UE) WARNING TR ED-V ROOF FANS ( C/2H) ARE CERTIFIED ACCORDING TO THE EN STANDARD FOR OPERATING AT MAX SPEED; NOT SUITABLE FORCOUPLING WITH COMMUTARS ABD SPEED CONTROLLERS IF USED FOR THESE FUNCTIONS. 7

71 NOTE NOTE 71

72 INDUSTRIAL VENTILATION ACCESSORIES ACCESSORIES Models Code Dimensions C1.5 Non reversible variable electronic speed controller. Not suitable for products with timer or automatic shutters. Convertible to flush-mounted using SCB kit. Weight.2 Kg. Maximum load 2 W 1.5 A (C 1.5). Double insulation A B A B 12 3 Dimensions (mm) A C Models Code A Kg IRM IRM IRM e IRT Variable voltage drive for industrial extractor fans 3 position variable speed drive. Supply voltage: 22-2 V for single-phase models. Supply voltage: V for three-phase models. Frequency: 5 Hz. Protection rating: IP56. Insulation class: Cl. I B D IRM IRT IRT IRT Models A B C D IRM IRM IRM 5 IRT 15 IRT 35 IRT Dimensions (mm) Models Code A Kg IREM IREM IREM IRET IREM e IRET Electrical speed controller for industrial extractor. Single-phase and three-phase speed controllers. Supply voltage: 22-2 V for single-phase models. Supply voltage: V for three-phase models. Frequency: 5Hz. Protection rating: IP5. Insulation class: Cl. I A D B C E E IREM 3/5 IRET 6 IREM Models A C D E F IREM IREM IREM IRET Dimensions (mm) 72

73 INDUSTRIAL VENTILATION ACCESSORIES Models Code Dimensions IREM INVERTER and IRET INVERTER Electronic INVERTER speed controllers for single-phase and three-phase extractor fans. Products of the IREM / IRET INVERTER series are frequency converters, designed to control the speed of three-phase motors connected to an a.c. power supply. The range includes 7 models, in single-phase (IREM) and three-phase (IRET) versions, complete with enclosures (allowing wall-mounted installation) and EMC filters. Models are differentiated from one another by maximum permissible load (A); accordingly, it is important to make a correct evaluation of the maximum overall current drawn by the driven fan, or fans, which must always be less than the maximum rated current of the inverter device. Products of the IREM / IRET INVERTER range are compact, reliable and efficient devices, simple and safe to use, especially suitable for controlling the speed of one or more fans. Models Code V ~ 5/6 Hz A Kg IREM INVERTER IREM INVERTER IREM INVERTER IRET INVERTER IRET INVERTER IRET INVERTER IRET INVERTER Range of frequency in out (Hz):.2 - Protection rating: IP2. Insulation class: Cl. I. C A B D Main technical specifications: Maximum length of power cables to the driven fan 2 m, in the case of unscreened conductors (where screened cables are employed, maximum length is reduced to 1 m). Maximum length of signal cable 3 m, in the case of screened conductors (or 2 m using unscreened cables); for longer cable runs, signal amplifiers will be needed. Overload capacity up to 2%.. Possibility of controlling multiple fans, depending on the maximum permissible current value. Wall-mounting enclosure. Built-in control potentiometer. Analog input for speed selection (signal -1 V; -2 ma). Protection against short-circuits. Protection against voltage peaks. Ambient operating limits: - Temperature between -1 C and + 5 C; - RH up to %; - Maximum altitude: 1 m. Built-in EMC filter. Built-in programming unit complete with LED display. Cooling fans driven by motors with shafts mounted on ball bearings. Optimum reliability guaranteed by diagnostic routines that will indicate the need for action when detecting an excessive reduction in efficiency of the cooling fan, or when the capacitors reach the end of their service life. Scheduling of maintenance operations is facilitated by a service meter. Protection mechanisms, including detection of phase loss on input and output circuits, help to ensure smooth and trouble-free operation at all times Models Code A B C D IREM INVERTER IREM INVERTER IREM INVERTER IRET INVERTER IRET INVERTER IRET INVERTER IRET INVERTER Dimensions (mm) 25 73

74 INDUSTRIAL VENTILATION ACCESSORIES ACCESSORIES Models Code Dimensions IREM INVERTER and IRET INVERTER M Electronic INVERTER speed controllers for single-phase and three-phase extractor fans. Products of the IREM / IRET INVERTER M series are compact, reliable and efficient frequency converters, simple and safe to use, especially suitable for controlling the speed of one or more fans driven by single-phase or threephase motors. The inclusion of an all-pole sinusoidal filter (phase-phase and phase-earth), integrated directly into each device of the range, guarantees correct speed control for every fan of compatible rated load without jeopardizing the reliability and durability of the motor, even if not specifically designed for inverter-controlled operation, and dispensing with the need for screened power cables. The IREM/IRET INVERTER M range comprises models, in single-phase (IREM M) and three-phase (IRET M) versions, complete with filters and with wall-mounting enclosures rated dust-tight and water-tight to a standard allowing installation outdoors. Models are differentiated from one another by maximum permissible load (A); accordingly, it is important to make a correct evaluation of the maximum overall current drawn by the driven fan, or fans, which must always be less than the maximum rated current of the selected inverter device. Main technical specifications: No limit on maximum length of power cables to the driven fan, even when unscreened cables are utilized. Maximum length of signal cable 3 m, in the case of screened conductors (or 2 m using unscreened cables); for longer cable runs, signal amplifiers will be needed. Possibility of controlling multiple fans, depending on the maximum current value. Wall-mounting enclosures with ingress protection IP5. Analog input for speed selection (signal -1 V; -2 ma or PWM). Digital input (2 V) for the connection of external devices, typically control potentiometers. Built-in motor protection; facility of connection to thermostats TB or thermistors TP ; where multiple fans are controlled simultaneously, thermostats or thermistors must be connected in series. Switching frequency 16 khz (guaranteeing smooth and quiet operation of the interlocked motor). Built-in EMC and Sinusoidal Filters RH up to 85%, without condensation.. Maximum altitude: m (at elevations above 1 m, the rated current must be reduced by 5% per 1 m) Models Code V ~ 5/6 Hz A Kg IREM INVERTER M IREM INVERTER 6 M IRET INVERTER 2.5 M IRET INVERTER 5 M Protection rating: IP5. Insulation class: Cl. I. B Models A B C IREM INVERTER M IREM INVERTER 6 M IRET INVERTER 2.5 M IRET INVERTER 5 M Dimensions (mm) A C C A POTENTIOMETR POTI 1K IP5 Potentiometer for IREM INVERTER and IRET INVERTER M (code 12815, 12818, 12816, 12817). Protection rating: IP5. Insulation class Cl. I Models A B C Kg POTENTIOMETR Dimesions (mm) B 7

VORTICENT C E RANGE Centrifugal fans

VORTICENT C E RANGE Centrifugal fans NEW VORTICENT C E RANGE Centrifugal fans Suitable for domestic, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars,

More information

VORT QBK SAL KC RANGE COMMERCIAL VENTILATION

VORT QBK SAL KC RANGE COMMERCIAL VENTILATION www.vortice.ltd.uk VORT QBK SAL KC RANE COMMERCIAL VENTILATION HEADQUARTERS VORTICE IN THE WORLD Founded in 1974, Vortice France is located at Crétail about 1 Km from Paris. Our current Vortice Headquarters

More information

vortice.com COMMERCIAL VENTILATION CATALOGUE IN-LINE FANS

vortice.com COMMERCIAL VENTILATION CATALOGUE IN-LINE FANS vortice.com COMMERCIAL VENTILATION B CATALOGUE INLINE FANS Vortice main company s philosopy is the concept that air is our life. Our mission is always to provide effective solutions for improved air quality

More information

vortice.com COMMERCIAL VENTILATION VORT NGR EVO RANGE High efficiency heat recovery units equipped with static exchangers NEW

vortice.com COMMERCIAL VENTILATION VORT NGR EVO RANGE High efficiency heat recovery units equipped with static exchangers NEW vortice.com COMMERCIAL VENTILATION VORT NGR EVO RANGE High efficiency heat recovery units equipped with static exchangers NEW B Vortice main company s philosophy is the concept that air is our life. Our

More information

IN-LINE FANS COMMERCIAL VENTILATION

IN-LINE FANS COMMERCIAL VENTILATION www.vortice.com IN-LINE FNS OMMERIL VENTILTION HEDQURTERS VORTIE IN THE WORLD Founded in 1974, Vortice France is located at rétail about 1 Km from Paris. Our current Vortice Headquarters have been located

More information

HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS

HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends in ventilation which will help to preserve the environment and

More information

NEW CA MD VENTILATION AIR CONDITIONING AIR CLEANING HEATING ATORTAT. DUISIM DELESTIO COMMOLOBORE

NEW CA MD VENTILATION AIR CONDITIONING AIR CLEANING HEATING ATORTAT. DUISIM DELESTIO COMMOLOBORE NEW CA MD in-line CENTRIFUGAL duct FANS WITH two speeds ATORTAT. DUISIM DELESTIO COMMOLOBORE DOLENISL UTPATET IP44 NONSEQUAM, Lo n g Li f e 3. h VELIT, SI. VENTILATION AIR CONDITIONING AIR CLEANING HEATING

More information

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators

More information

Specifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).

Specifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and

More information

Work area: Max. pressure: 2,150Pa Max. air volume: 2.100m³/h. Manufacturer. Production year. Model number/type. page

Work area: Max. pressure: 2,150Pa Max. air volume: 2.100m³/h. Manufacturer. Production year. Model number/type. page Centrifugal fan with closed fan wheel that is used at source extraction from air pollulant or chip making work processes. The transported air may not contain adhestive or sticky fumes or dust. Work area:

More information

AC Commercial Fans Edition. ErP ready

AC Commercial Fans Edition. ErP ready AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application

More information

AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:

AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average

More information

Short casing. Long casing (L version) Commercial premises

Short casing. Long casing (L version) Commercial premises CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled

More information

supplied in Form (B) configuration. Airflow over Impeller- Motor.

supplied in Form (B) configuration. Airflow over Impeller- Motor. CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,

More information

400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity

400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity 400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,

More information

FEATURES & BENEFITS UPON REQUEST

FEATURES & BENEFITS UPON REQUEST ErP 27 IDUSTRIAL CETRIFUGAL FAS WITH VERY HIGH PRESSURE APPLICATIO High pressure industrial centrifugal fans with backward curved impeller, suitable for exhausting clean or slightly dusty air. They can

More information

Multifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows

Multifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection

More information

IN-LINE DUCT FANS MIXVENT-TD Fan Systems

IN-LINE DUCT FANS MIXVENT-TD Fan Systems IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment

More information

VORT QUADRO RANGE. Design: F. Trabucco & Associati

VORT QUADRO RANGE. Design: F. Trabucco & Associati VORT QUADRO RANGE CENTRIFUGAL EXTRACTOR FANS FOR WALL/CEILING INSTALLATION AND FLUSH MOUNTING WITH OPTIONAL SIDE EXTRACTION VENTILATION AIR CONDITIONING AIR TREATMENT HEATING TM Design: F. Trabucco & Associati

More information

Dynamically-balanced impellers with extremely robust cores CMP T 5.5

Dynamically-balanced impellers with extremely robust cores CMP T 5.5 Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.

More information

PRODUCT SELECTION DATA. Performance. Flexibility. Intelligence. Energy optimisation. Acoustic optimisation. Drycoolers 09PE

PRODUCT SELECTION DATA. Performance. Flexibility. Intelligence. Energy optimisation. Acoustic optimisation. Drycoolers 09PE PRODUCT SELECTION DATA Performance Flexibility Intelligence Energy optimisation Acoustic optimisation Drycoolers 09PE Translation of the original document N 20030, 02.2017 Use 09PE The 09PE range is particularly

More information

IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems

IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range

More information

CMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C

CMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C BACKWARD CURVED CENTRIFUGAL FANS CMRT Series 80 C Continuous operation Range of single inlet direct drive centrifugal fans designed for continuous extraction of air stream up to 80ºC. Casings are manufactured

More information

Powerful centrifugal fans for universal use: The product ranges TEM and REM

Powerful centrifugal fans for universal use: The product ranges TEM and REM Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which

More information

Multifunctional 400ºC/2h and 300ºC/2h roof fans

Multifunctional 400ºC/2h and 300ºC/2h roof fans HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544

More information

400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet

400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS THT/ROOF 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Roof-mounted helical extractor fans with vertical air outlet, for

More information

Centrifugal fan with highly efficient EC drive motor

Centrifugal fan with highly efficient EC drive motor Centrifugal fan with highly efficient EC drive motor simple and safe application and installation 2 Why HLU? 90 years of experience in the plastics processing market More than 10.000 m² production in Germany

More information

CA V0 E RANGE In-line centrifugal fans in self-extinguishing plastic

CA V0 E RANGE In-line centrifugal fans in self-extinguishing plastic new CA V E RANGE In-line centrifugal fans in self-extinguishing plastic Suitable for the continuous or intensive ventilation of medium or large domestic, commercial or industrial environments. 7 models:

More information

THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G

THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.

More information

Powerful centrifugal fans for universal use: The product ranges TEM and REM

Powerful centrifugal fans for universal use: The product ranges TEM and REM Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which

More information

Sabre Plate Mounted Sickle Fans (VSP)

Sabre Plate Mounted Sickle Fans (VSP) Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation

More information

CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB

CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The

More information

Energy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation. (Catalogue no. 1)

Energy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation. (Catalogue no. 1) Industrial and commercial ventilation (Catalogue no. 1) Industrial and commercial ventilation components - fans for round and rectangular ducts, sound-insulated, axial and roof fans, air handling units

More information

HIGH-POWERED VENTILATORS

HIGH-POWERED VENTILATORS HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series

More information

CJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation

CJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBX/AL CJBX/ALS CJBX/ALF VENTILATION UNITS WITH ALUMINIUM PROFILES According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBD/AL: Soundproofed ventilation units with profiles in

More information

CYLINDRICAL CASED AXIAL FLOW FANS

CYLINDRICAL CASED AXIAL FLOW FANS - Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate

More information

When Italian Design meets Technology

When Italian Design meets Technology W A L L A X I A L F A N S Flexo www.vortice.com When Italian Design meets Technology NEW RESIDENTIAL VENTILATION W A L L A X I A L F A N S Flexo Italian design, elegance and quality. Vortice has always

More information

Unobox units with backward curved centrifugal impellers

Unobox units with backward curved centrifugal impellers Unobox Fans Unobox units with backward curved centrifugal impellers Type Code UNO 67-450 -4 E W Unobox Box size 50=500mm ; 67=670mm 80=800mm ; 102=1020mm Impeller diameter Number of poles D - Three Phase

More information

Centrifugal performance characteristics with axial flow pattern: RADAX VAR

Centrifugal performance characteristics with axial flow pattern: RADAX VAR High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers

More information

product selection data Performance Flexibility Intelligence Energy optimisation Acoustic optimisation Drycoolers - Air-cooled condensers 09PE

product selection data Performance Flexibility Intelligence Energy optimisation Acoustic optimisation Drycoolers - Air-cooled condensers 09PE product selection data Performance Flexibility Intelligence Energy optimisation Acoustic optimisation Drycoolers - 09PE Translation of the original document N 20030, 03.2015 Use The 09PE range, available

More information

PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with

More information

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey

More information

VORT QUADRO RANGE CENTRIFUGAL EXTRACTOR FANS FOR WALL/CEILING INSTALLATION AND FLUSH MOUNTING WITH OPTIONAL SIDE EXTRACTION

VORT QUADRO RANGE CENTRIFUGAL EXTRACTOR FANS FOR WALL/CEILING INSTALLATION AND FLUSH MOUNTING WITH OPTIONAL SIDE EXTRACTION NEW VORT QUADRO RANGE CENTRIFUGAL EXTRACTOR FANS FOR WALL/CEILING INSTALLATION AND FLUSH MOUNTING WITH OPTIONAL SIDE EXTRACTION VENTILATION AIR CONDITIONING AIR TREATMENT HEATING Design F. Trabucco & Associati

More information

vortice.com VORT QUADRO EVO RANGE RESIDENTIAL VENTILATION NEW

vortice.com VORT QUADRO EVO RANGE RESIDENTIAL VENTILATION NEW vortice.com VORT QUADRO EVO RANGE RESIDENTIAL VENTILATION NEW VORT QUADRO EVO RANGE Centrifugal extractor fans for wall/ceiling and flush mounting CONSTRUCTION: VENTILATION UNIT: AC motor, shaft on ball

More information

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey

More information

In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.

In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information. In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V

More information

CONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,

CONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard, RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from

More information

ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE

ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4

More information

Centrifugal medium-pressure fans fitted with multi-blade

Centrifugal medium-pressure fans fitted with multi-blade CMP/ATEX CMP/ATEX impeller Centrifugal medium-pressure fans fitted with multi-blade with ATEX certification Centrifugal single-inlet, medium-pressure fans with casing and sheet steel impeller to work in

More information

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to

More information

Performance. Sound Levels. Impellers. Motors. Accessories

Performance. Sound Levels. Impellers. Motors. Accessories EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class

More information

CHMT Series, F Rated Fans

CHMT Series, F Rated Fans CNTRIFUGAL SINGL INLT FANS CT Series, F400 120 Rated Fans Officially approved to N12101-3 standard (certificate number 0370-CPD-0348) Range of single inlet direct drive centrifugal fans designed for smoke

More information

product selection data Slim design Acoustic comfort 40% smaller footprint Drycoolers 09VE

product selection data Slim design Acoustic comfort 40% smaller footprint Drycoolers 09VE product selection data Slim design Acoustic comfort 40% smaller footprint Drycoolers 09VE Translation of the original document N 20033, 03.2015 Drycoolers Use Drycoolers in this range are mainly designed

More information

CGT Series Adjustable Pitch Fans

CGT Series Adjustable Pitch Fans AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel

More information

HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel

More information

CAV controllers. Type RN-Ex. For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) PD RN-Ex 1

CAV controllers. Type RN-Ex. For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) PD RN-Ex 1 X X testregistrierung CAV controllers Type Adjustment scale ATEX-Zertifizierung For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) Circular, mechanical self-powered

More information

Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.

Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1. xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof

More information

CJSX-SILENT 400º/2H BELT-DRIVEN EXTRACTION UNITS SOUNDPROOFED DOUBLE-WALL OF SOUNDPROOFING 40 MM THICK

CJSX-SILENT 400º/2H BELT-DRIVEN EXTRACTION UNITS SOUNDPROOFED DOUBLE-WALL OF SOUNDPROOFING 40 MM THICK CJSX-SILENT 400º/2H BELT-DRIVEN EXTRACTION UNITS SOUNDPROOFED DOUBLE-WALL OF SOUNDPROOFING 40 MM THICK CJSX- SILENT 400ºC/2h single-inlet belt-driven extraction units, in pre-lacquered sheet metal, double-wall

More information

MVSI. Technical features

MVSI. Technical features MVSI The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market,

More information

CGT Series Adjustable Pitch Fans

CGT Series Adjustable Pitch Fans AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel

More information

ROOF FAN ROOFMASTER STEC

ROOF FAN ROOFMASTER STEC AIR COMFORT AIR MOVEMENT ROOF FANS ROOF FAN ROOFMASTER STEC INSULATED VERSION» TECHNICAL CATALOGUE 2 STEC Roofmaster - Technical Catalogue CONTENTS GENERAL DESCRIPTION Application/specification... 3 Features...

More information

CRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS

CRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire

More information

Technical features Certifications

Technical features Certifications The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market, with

More information

TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans

TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester

More information

Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1.

Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1. X X testregistrierung Shut-off dampers Type ATEX-compliant parts and units For low-leakage shut-off of volume flows in potentially explosive atmospheres (ATEX) Circular shut-off dampers for shutting off

More information

MegaBox Product-specific information

MegaBox Product-specific information MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions

More information

Versatility. Features. By installing the SILENT MV, you will never experience the disturbance of noisy ventilation again. Benefits

Versatility. Features. By installing the SILENT MV, you will never experience the disturbance of noisy ventilation again. Benefits Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent insulation and manufactured with an adjustable

More information

BRIZA 22 HYBRID HEATING & COOLING

BRIZA 22 HYBRID HEATING & COOLING BRIZA 22 HYBRID HEATING & COOLING Built-in Ceiling: BABC/BT BABC/FT Built-in Wall: BABW/BT BABW/BF BABW/FT BABW/FF INFO SHEET BRIZA 22 HYBRID, COMPACT FANCOIL With EC Greentech EBM-PAPST technology Europe

More information

CAV controllers. Type EN-Ex. For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX)

CAV controllers. Type EN-Ex. For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX) X X testregistrierung CAV controllers Type Adjustment scale For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX) Rectangular, mechanical self-powered

More information

TCDH F400-TCDV F400. Smoke extract - Fire protection SMOKE EXTRACT FANS CENTRIFUGAL BACKWARD ROOF FANS F Application. Range.

TCDH F400-TCDV F400. Smoke extract - Fire protection SMOKE EXTRACT FANS CENTRIFUGAL BACKWARD ROOF FANS F Application. Range. N OU VE A U Approved F400 10 (400 C 10 mn) CE marked Special range for speed variation VAR Easy installation and maintenance Low sound level Electrical accessories and relay box mounted wired New vertical

More information

CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series

CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester

More information

CENTRIFLOW 3D WITH EC MOTOR >> Technical catalogue

CENTRIFLOW 3D WITH EC MOTOR >> Technical catalogue CENTRIFLOW 3D Plug Fan WITH EC MOTOR >> Technical catalogue air comfort CentriFlow 3D 2 GMEC CentriFlow 3D - Technical Catalogue Contents GENERL Description and survey chart pplication... 3 General Survey

More information

Novenco axial flow fans. ZerAx - Standard January 2010

Novenco axial flow fans. ZerAx - Standard January 2010 Novenco axial flow fans ZerAx - Standard January 2010 Product facts Product The Novenco ZerAx series of axial flow fans uses innovative design to reduce power consumption by improving efficiency. As an

More information

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).

More information

TGT Series Adjustable Pitch Fans

TGT Series Adjustable Pitch Fans CYLINDRICAL CASED AXIAL FLOW FANS Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot dipped

More information

ROOFMASTER STEF-ATEX ROOF FAN

ROOFMASTER STEF-ATEX ROOF FAN Air Comfort Air movement Roof fans ROOFMASTER STEF-ATEX ROOF FAN» Technical CATALOGuE 2 STEF-ATEX Roofmaster - Technical Catalogue Contents General description Application/specification... 3 Features...

More information

Axial fans. What s more, non-stock models are normally available within two weeks.

Axial fans. What s more, non-stock models are normally available within two weeks. Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive

More information

hore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &

hore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC & hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL

More information

CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.

CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced. LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a

More information

AC axial fan. sickled blades (S series) with full square nozzle

AC axial fan. sickled blades (S series) with full square nozzle WD5-GA-9 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Small centrifugal fans made of plastic

Small centrifugal fans made of plastic Small centrifugal fans made of plastic durable application-optimised wide range of variants 2 Small centrifugal fans made of plastic Index Small centrifugal fans made of plastic HF R 75-16 D and HF R 110-18

More information

GigaBox centrifugal fans Product specific information

GigaBox centrifugal fans Product specific information GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,

More information

ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series

ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air

More information

Explosion proof electric motor For Fuel dispensing application. Main characteristic

Explosion proof electric motor For Fuel dispensing application. Main characteristic Ad-pe ed.2018/0 1 Explosion proof electric motor For Fuel dispensing application RAEL motori elettrici, since its inception in the late 60s, has assembled more than a million of explosion proof electric

More information

TGT Series Adjustable Pitch Fans

TGT Series Adjustable Pitch Fans CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot

More information

Section 4. Axial Fans - Section 4

Section 4. Axial Fans - Section 4 Axial Flow Fans Section 4 Fläkt Woods offers a wide range of axial flow fans for general air movement and special applications such as emergency high temperature smoke extract and pressurisation. ATEX

More information

TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller.

TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller. TSA TSAT CJTSA TSA: Single inlet, belt-driven centrifugal fans with shaft outlet and forward-curved impeller. TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors, a set of pulleys

More information

Medium Pressure Centrifugal Fans

Medium Pressure Centrifugal Fans Medium Pressure Centrifugal Fans 2012 Edition ...About Axair Fans UK Application Knowledge: Over 20 years experience in general air movement; including corrosive, explosive and hot fume handling. Stock

More information

AXIAL FANS Axis / Tubo OPERATION MANUAL

AXIAL FANS Axis / Tubo OPERATION MANUAL TUBO-M AXIS-QA AXIS-Q AXIS-QR AXIS-F AXIS-QRA AXIAL FANS Axis / Tubo OPERATION MANUAL Axis / Tubo www.blaubergventilatoren.de CONTENT 3 Introduction 3 General 3 Safety rules 3 Transport and storage requirements

More information

.3 Section Vibration Isolation and Seismic Control..2 ANSI/AMCA 210/ASHRAE 51 Laboratory Methods of Testing Fans for Rating.

.3 Section Vibration Isolation and Seismic Control..2 ANSI/AMCA 210/ASHRAE 51 Laboratory Methods of Testing Fans for Rating. Issued 2005/06/01 Section 15831 Commercial Fans Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal..2 Section 15053 Motors, Drives and Guards..3 Section 15072

More information

Control and monitoring of laboratory ventilation Corrosion resistant ventilation systems

Control and monitoring of laboratory ventilation Corrosion resistant ventilation systems Control and monitoring of laboratory ventilation Corrosion resistant ventilation systems Corrosion resistant polypropylene fans urability Single piece high density polypropylene molded casing, more durable.

More information

SILENT MV Ultra Quiet In-line Fans

SILENT MV Ultra Quiet In-line Fans Ultra Quiet In-line Fans 5 IP44 2 YEAR GUARANTEE Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent

More information

Centriflow Plus EC. Technical data

Centriflow Plus EC. Technical data Technical data Centriflow Plus CTLOGUE Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Inlet cone and supporting frame...5 EC motor...5 ir flow sensor...6

More information

Protection against mechanical impacts IK 08 according to IEC 68, EN Insulation class Class F (155 C), class H (180 C) on request.

Protection against mechanical impacts IK 08 according to IEC 68, EN Insulation class Class F (155 C), class H (180 C) on request. MVSI The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market,

More information

RLM EVO High Performance - Plug Fans Impeller with true airfoil blades

RLM EVO High Performance - Plug Fans Impeller with true airfoil blades RLM EVO High Performance - Plug Fans Impeller ith true airfoil blades Issue 1 1 RLM EVO Ready for the next generation Overall static RLM EVO 211 213 215 ErP-Guideline 9/125/EG We have accelerated impeller

More information

VKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.

VKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille. Application Features Power supply Circular duct fans are used in low-to medium-pressure ducted systems. Fans are suitable for air supply or exhaust of residential buildings, warehouses, bathrooms, lavatories,

More information

ACOUSTIC CABINET FANS CVB / CVT Series

ACOUSTIC CABINET FANS CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive

More information

NEOSTAR NEW! Condensers. www. 18 kw 1250 kw

NEOSTAR NEW! Condensers. www. 18 kw 1250 kw Condensers NEOSTAR 18 kw 12 kw Friga-Bohn reserves itself the right to make changes at any time without preliminary notice - Photos non-contractual www NEW! The air cooled condenser units of the new NEOSTAR

More information

AC centrifugal fan - RadiCal

AC centrifugal fan - RadiCal RE5-RB6- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Vent-Axia Sabre Sickle Roof Fans (VSR)

Vent-Axia Sabre Sickle Roof Fans (VSR) Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,

More information