40A DC UPS Module SPECIFICATION MODEL DC INPUT / DC BUS DR-UPS40 24 ~ 29V 40A 21 ~ 29V 0 ~ 40A 2A 4 / 7 / 12AH / 24V
|
|
|
- Hector Norton
- 5 years ago
- Views:
Transcription
1 40A DC US Module Jameco SKU Number: DR-US40 SECIFICATION MODEL DC INUT / DC BUS BATTERY INUT / OUTUT FUNCTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE (Typ.) RATED CURRENT VOLTAGE RANGE (Typ.) CURRENT RANGE CHARGE CURRENT (Typ.) EXTERNAL BATTERY (Typ.) EMS IMMUNITY MTBF DIMENSION ACKING DR-US40 RELAY CONTACT RATING (max.) 30VDC, 1A DC BUS BATTERY FAIL BATTERY DISCHARGE WORKING TEM. WORKING HUMIDITY STORAGE TEM., HUMIDITY VIBRATION WITHSTAND VOLTAGE 24 ~ 29V 40A 21 ~ 29V 0 ~ 40A 2A 4 / 7 / 12AH / 24V Relay contact : Short when DC voltage between 21~29V( 3%), relay contacts LED(Green) : DC BUS : light ; DC BUS fail : dark Relay contact : Short when battery failure is observed through the battery test function, relay contacts Note.2 LED(Red) : Battery over-discharge warning or battery broken : light ; Battery : dark Relay contact : Short when battery in discharge condition, relay contacts LED(Yellow) : Battery discharging : light ; Battery is not discharging or discharging current<2.0a : dark -20 ~ ~ 90% RH -20 ~ 85, 10 ~ 95% RH Component : 10 ~ 500Hz, 2G 10min./1cycle, 60min. each X, Y, Z axes ; Mounting : Compliance to IEC Terminal-Chassis :0.5KVAC, Relay Contacts-Terminal :0.5KVAC ISOLATION RESISTANCE Terminal-Chassis :>100M Ohms/500VDC 25 70%RH EMI CONDUCTION & RADIATION Compliance to EN55022 (CISR22) Class B Compliance to EN ,3,4,5,6,8, ENV50204, heavy industry level, criteria A 161.9Khrs min. MIL-HDBK-217F (25 ) 55.5*125.2*100mm (W*H*D) 0.55Kg; 20pcs/12Kg/1.29CUFT File Name:DR-US40-SEC
2 40A DC US Module Jameco SKU Number: DR-US40 Mechanical Specification Case No.923D Unit:mm TB1 3 4 LED TB ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 35 Terminal in No. Assignment (TB1) in No. Assignment 1 BATTERY INUT 2 BATTERY INUT - 3 DC INUT - 4 DC INUT Terminal in No. Assignment (TB2) in No. Assignment 1 BAT DISC 1 BAT DISC BAT FAIL 1 BAT FAIL 2 DC 1 DC 2 Block Diagram Derating Curve LOAD OWER SULY INUT CHARGE CIRCUIT LIMIT DETECTION CIRCUIT 25Ax2 BAT. TEST 24V BATTERY LOAD (%) DC BAT FAIL BAT DISCHARGE (VERTICAL) AMBIENT TEMERATURE ( ) File Name:DR-US40-SEC
3 40A DC US Module Jameco SKU Number: DR-US40 Suggested Application 1.Back up connection for AC interruption DR-US40 24V SU Battery BAT DC V/40A max. Load Combine redundancy module (DR-RDN20) to back up AC interruption or failure of SU DR-US40 DR-RDN20 24V Battery SU Load BAT DC File Name:DR-US40-SEC
4 40Amp US DR-US40 MODEL:DR-US40 DC INUT / DC BUS NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 DC VOLTAGE RANGE (TY) 24V~29V I/: TESTING O/:FULL LOAD 23.68V~29.16 V 2 RATED CURRENT 40A I/: 24 VDC O/:FULL LOAD BATTERY INUT / OUTUT NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 VOLTAGE RANGE (TY) 21VDC~29VDC I/: TESTING O/: BATTERY 20.76V~29V 2 CURRENT RANGE 0~40A I/: 23V O/: BATTERY 3 CHARGE CURRENT (TY) 2A I/: 24.5VDC O/:BATTERY 2.1A 4 EXTERNAL BATTERY (TY) 4 / 7 / 12AH /24V I/: 24VDC O/:BATTERY FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 RELAY CONTACT RATING 30VDC / 1A (MAX) I/: 30VDC O/:1A 2 DC BUS Relay contact : short when DC voltage I/: TESTING Between 21~29V ( 3%), O/:FULL LOAD relay contacts ; Green LED on front panel LED (Green) : DC BUS : light : DC BUS fail : dark 3 BATTERY FAIL Relay contact : short when battery failure Is observed through the battery test Function, relay contacts ; Red LED on front panel LED(Green): DC BUS : light : DC BUS fail : dark I/: TESTING O/:FULL LOAD 4 BATTERY DISCHARGE Relay contact : short when battery in discharge condition relay contacts ; Yellow LED on front panel LED(Green) : DC BUS : light : DC BUS fail : dark I/: TESTING O/:FULL LOAD Model: DR-US40 Test Report 1 / 3
5 40Amp US DR-US40 ENVIRONMENT TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 TEMERATURE RISE TEST MODEL:DR-US40 1. ROOM AMBIENT BURN-IN:1HRS I/: 24VDC O/: FULL LOAD Ta= HIGH AMBIENT BURN-IN:1HRS I/: 24VVDC O/: FULL LOAD Ta= 69.8 NO osition /N ROOM AMBIENT Ta= 32.7 HIGH AMBIENT Ta= D16 MBR1545CT 15A/45V RG A/12V D9 YG802C04 10A/40V RY5 VK31H42 24V/40A RY4 VK31H42 24V/40A D17 SB540 5A/40V Q6 IRFZ44V 55A/60V Q8 IRFZ44V 55A/60V RY1 OUAZ-SS A/24V RY2 OUAZ-SS A/24V RY3 OUAZ-SS A/24V C3 2.2U/50V 105 KY C1 220U/35V 105 KY U1 LM LOW TEMERATURE TURN ON TEST TURN ON AFTER 2 HOUR I/: 24VDC O/: 100 % LOAD Ta= -20 TEST: 3 HIGH HUMIDITY HIGH TEMERATURE HIGH VOLTAGE TURN ON TEST AFTER 12 HOURS IN CHAMBER ON CONTROL 70 NO DAMAGE 4 VIBRATION TEST 1 Carton & 1 Set (1) Waveform: Sine Wave (2) Frequency:10~500Hz (3) Sweep Time:10min/sweep cycle (4) Acceleration:2G (5) Test Time:1 hour in each axis (X.Y.Z) (6) I/: 24VDC O/:FULL LOAD Ta= 70 HUMIDITY= 95 %R.H TEST: TEST: SAFETY TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 WITHSTAND VOLTAGE Terminal-chassis: 0.5 KVAC/min Terminal-chassis: 0.6 KVAC/min Terminal-chassis: 0.06 ma Relay contacts-terminal:0.5 KVAC/min Relay contacts-terminal:0.6 KVAC/min Relay contacts-terminal: 0.06 ma NO DAMAGE 2 ISOLATION RESISTANCE Terminal-chassis : 500VDC>100MΩ Terminal-chassis : 500 VDC Terminal-chassis 16 GΩ NO DAMAGE Model: DR-US40 Test Report 2 / 3
6 40Amp US DR-US40 E.M.C TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 CONDUCTION EN55022 CLASS B 2 RADIATION EN55022 CLASS B I/: 24VDC O/:FULL/50% LOAD I/: 24VDC O/:FULL/50% LOAD ASS Test by certified Lab ASS Test by certified Lab 3 E.S.D EN INDUSTRY AIR:8KV / Contact:4KV I/: 24VDC O/:FULL/50% LOAD CRITERIA A 4 E.F.T EN INDUSTRY V / V-: 0.5KV I/: 24VDC O/:FULL/50% LOAD CRITERIA A 5 SURGE IEC INDUSTRY V / V- :0.5KV V,V- / E : 0.5KV I/: 24VDC O/:FULL/50% LOAD CRITERIA A 6 Test by certified Lab & Test Report repare M.T.B.F & LIFE CYCLE CALCULATION NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 CAACITOR LIFE CYCLE SUOSE C1 IS THE MOST CRITICAL COMONENT I/: 24VDC O/:FULL LOAD Ta= 25 LIFE TIME= HRS I/: 24VDC O/:FULL LOAD Ta= 70 LIFE TIME= HRS 2 MTBF MIL-HDBK-217F NOTICES2 ARTS COUNT TOTAL FAILURE RATE: 161.9KHRS DATE SAMLE TEST RESULT TESTER AROVAL 2007/1/16 RD SAMLE ASS VINCENT TSENG MAX LIN 2007/3/ /5/9 2007/8/31 RODUCT SAMLE W0702A10 RODUCT SAMLE W0704C05 RODUCT SAMLE W0708D06 ASS VINCENT TSENG MAX LIN ASS VINCENT TSENG MAX LIN ASS VINCENT TSENG MAX LIN 2003/12/12 A50-F023 Model: DR-US40 Test Report 3 / 3
PB-600 series. Jameco SKU Number: W Single Output Battery Charger SPECIFICATION MODEL
.. Jameco SKU Number: 24381 600W Single Output Charger B-600 series SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 2) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE
Jameco SKU Number:
Jameco SKU Number: 2105842 60W Single Output with Battery Charger(US Function) SC-60 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE OUTUT NUMBER
Test Report: GST18A24-P1J
Test Report: GST18A24-1J 18W AC-DC High Reliability Industrial Adaptor DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 100W Single Output Switching ower Supply MODEL:RS-100-48 OUTUT FUNCTION
Test Report: SCP 35 12
Test Report: SC 35 12 35W Single Output Switching ower Supply DESIGN ERIFY TEST Output Function Test Input Function Test rotection Function Test Control Function Test Component Stress Test SAFETY & E.M.C.
Test Report: IRM-45-5
Test Report: IRM-45-5 45W Single Output Encapsulated Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test E.M.C.
Test Report: IRM-45-12
Test Report: IRM-45-12 45W Single Output Encapsulated Type DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test E.M.C.
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Declaration of RoHS Conformity To minimize the environmental impact and
100W Single Output Switching Power Supply MODEL:PLN OUTPUT FUNCTION TEST NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT.
100W Single Output Switching ower Supply LN-100 series MODEL:LN-100-48 OUTUT FUNCTION TEST NO TEST ITEM SECICTION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 200 mvp-p (Max ) I/: 230VC O/: 95% LOD
100W Single Output Switching Power Supply NO TEST ITEM SPECICATION TEST CONDITION RESULT VERDICT
MODEL:LPV-100-24 OUTPUT FUNCTION TEST 1 RIPPLE & NOISE V1: 150 mvp-p (Max ) V1: 6 mvp-p (Max ) 2 OUTPUT VOLTAGE TOLERANCE V1: -5 %~ +5 % (Max) I/P: 100VAC / 264 VAC O/P:FULL/ 0% LOAD V1: -0.36%~ +0.2 %
30W Single Output Switching Power Supply MODEL:PLN OUTPUT FUNCTION TEST NO TEST ITEM SPECIFICATION TEST CONDITION RESULT VERDICT
30W Single Output Switching ower Supply LN-30 series MODEL:LN-30-12 OUTUT FUNCTION TEST NO TEST ITEM SECIFICTION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 2 Vp-p (Max ) I/: 230VC O/: 100% LOD V1:
30W Single Output Switching Power Supply MODEL:PLN OUTPUT FUNCTION TEST NO TEST ITEM SPECIFICATION TEST CONDITION RESULT VERDICT
30W Single Output Switching ower Supply LN-30 series MODEL:LN-30-36 OUTUT FUNCTION TEST NO TEST ITEM SECIFICTION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 4.5 Vp-p (Max ) I/: 230VC O/: 100% LOD
Test Report: UHP
Test Report: UHP-500-36 500W Slim Type with PFC Switching Supply DESIGN VERIFY TEST Output Function Test Input Function Test Protection Function Test Component Stress Test SAFETY & E.M.C. TEST Safety Test
D R C- 4 0 s e r i e s
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PB-300 / 360 USER'S MANUAL SPECIFICATION : PB-300 MODEL BOOST CHARGE VOLTAGE
TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
Features : 3 years warranty PB PB PB V 28.8V 57.6V 13.8V 86% 87% 89%
600W Single Output Charger PB600 series SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 2) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE RECOMMENDED BATTERY
UHP-500 series. 500W Slim Type with PFC Switching Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 500W Slim Type with PFC Switching Supply S&E GB4943 UL950- EN950- IEC950- % - ~+ Industrial automation machinery Industrial
Industrial Power Supplies
, Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with
DC (on) LED Signal. Multiple output connector for easy wiring
DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage
DIN Rail Power Supplies
DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
1000W Intelligent Single Output Battery Charger PB PB PB V 28.8V 57.6V 13.8V 85% 88% 89%
PB000 series SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note ) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE OUTPUT CURRENT RECOMMENDED BATTERY 00 ~ 600Ah CAPACITY(AMP
UHP-200 series. 200W Slim Type with PFC Switching Power Supply. File Name:UHP-200-SPEC GB4943 EN EN UL IEC
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 000000000 GB494 UL950- EN950- EN5- IEC950- % - ~+ R SPECIFICATION MODEL UHP-00 -. UHP-00-4. UHP-00-5 UHP-00 - UHP-00-5 UHP-00-4 UHP-00-6
PB-600 SERIES 600 Watt Battery Charger Power Supply Measures: 9.06 x 6.22 x 2.64
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT INPUT MEAN WELL PB600 SERIES PB60012 PB60024 PB60048 BOOST CHARGE VOLTAGE 14.4V 28.8V 57.6V FLOAT
600W Intelligent Single Output Battery Charger 21A 10.5A VOLTAGE RANGE FREQUENCY RANGE
Bauart gepruft Sicherheit egelma ge od o s be wac g 600W Intelligent Single Output Charger PB600 series SPECIFICATION SAFETY & EMC (Note 3) SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
UHP-350 series. 350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 50W Slim Type with PFC Switching Power Supply GB494 UL950-1 EN950-1 EN5-1 IEC950-1 - ~ Industrial automation machinery Industrial
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 350W Slim Type with PFC Switching Power Supply S&E GB4943 UL950-1 EN950-1 EN335-1 IEC950-1 % - ~+ Industrial automation machinery
UCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet
Combined Power Supply & Battery Charger Data Sheet INTRODUCTION UCS-CHR24V55W is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
BP- A Series Switch-Mode 3 Stage Battery Charger User s Manual
BP- A Series Switch-Mode 3 Stage Battery Charger User s Manual Table of Contents 1. Important Safety Information. 1 1-1 General Safety Precautions 1 1-2 Battery Precautions..... 2 2. Features... 3 2-1
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
Models. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery
AC/DC Battery Controller Power Supply TSPC-240UPS Series Compact universal 24 VDC power supply with integrated battery controller module Battery protection for over voltage, deep discharge, short circuit
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
AC/DC Converter MBP250-2A13D13M
250W, 165-264VAC Input, Dual output AC/DC battery charging module power supply FEATURES Low stand-by power consumption, Maximum instantaneous power up to 350W With charging function, the 12V output Lead-acid
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
60W Single Output LED Power Supply. HBG-60 series. File Name:HBG-60-SPEC
Ⅱ { SPECIFICATION MODEL HBG-60-10 HBG-60-10 HBG-60-2 OUTPUT INPUT RATED CURRENT CURRENT ACCURACY EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT SHORT CIRCUIT PROTECTION OVER TEMPERATURE
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
Series AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
TDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
Video & Power Over Coax Kit
VPoC User Manual Video & Power Over Coax Kit 1CH Video Power over Coax w/ 12V DC Receiver Device VPoC24DC-01K VPoC24DC-01 N-42-1 x1 N-41C 4CH / 8CH / 16CH Video Power over Coax Server Kit VPoC24DC-04K
IS 15885(Part 2/Sec13) R ( for 24V only)
THOMAS SAMUEL THOMAS SAMUEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g W Constant Voltage + Constant Current LED Driver 110 M IP67 Features Constant Voltage + Constant Current mode output Plastic
DC/DC Converter URB1D_LD-15W & URB1D_LD-20W Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated DC/DC converter Wide range of input voltage (4:1) Efficiency up to 89% Isolation voltage :1.5K VDC Operating temperature range: -40
Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
EMC Filter FC-CxxD Series
EMC Filter FEATURES Meet IEC/EN61000-4 series standard and CISPR22/EN55022 Meets requirements of railway standard EN50155 Reverse input voltage protection High efficiency up to 98% Mounting: PCB mounting,
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W
2019-V1.0-0318 Specifications AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
FEATURES. Input Voltage (VDC) 3.3
DC/DC Converter FEATURES 15W, wide input, isolated & regulated DC/DC converter CB Patent Protection Wide input voltage range (2:1) High efficiency up to 90% No-load power consumption as low as 0.12W Isolation
PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
Safety Standards. Model Number:
Highlights & Features RoHS Compliant Relay alarm indirection Built-in 2 channel DC OK signal Caused by rugged handing Conformal coating on PCBA to protect against chemical and dust pollutants Class I,
Switching Power Supplies
, 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals
TDK-Lambda ZWS300BAF/A
ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4
60W Constant Current Mode LED Driver. HBG-60 series. File Name:HBG-60-SPEC
05 SPECIFICATION MODEL OUTPUT INPUT RATED CURRENT RATED POWER CONSTANT CURRENT REGION OPEN CIRCUIT VOLTAGE(max.) CURRENT ADJ. RANGE CURRENT RIPPLE CURRENT TOLERANCE SET UP TIME VOLTAGE RANGE FREQUENCY
KNX-20E. 640mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15. File Name:KNX-20E-SPEC Sicherheit ID
640mA KX Power Supply KX-20E Bauar t gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Isolation classⅠ Installed on DI rail TS-35/7.5 or 15 File ame:kx-20e-spec 2016-08-24 640mA
Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
![Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/80/80466451.jpg "Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
Advanced Battery Charger. 3 - stage charging capability (IUOU) 4.1 A / 100VAC 1.8A / 240VAC
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
![Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/77/76098235.jpg "Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
LPF-25 series. 25W Constant Voltage + Constant Current LED Driver
F 110 M M SELV IP67 Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP67 level Typical
RWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
SELV IP30 (CCC optional)
Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP30 level, optional IP67 rating Typical
Features. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
Features. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
MD60 Series 60W DINergy Power Supply
MD60 Series 60W DINergy Power Supply Features Compact size, high efficiency and DIN Rail mounting 60 C rated provides full power/no derating required 100-240VAC wide-range auto-selection input Overcurrent,
DC/DC Converter URA(B)_LD-15WR2 & URA(B)_LD-20WR2 Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated dual / single output DC/DC converter Patent Protection RoHS Wide range of input voltage (4:1) Efficiency up to 90% Isolation voltage
Load (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
Redundancy unit CP-C.1-A-RU Accessory for CP-C.1 range power supplies
Data sheet Redundancy unit -A-RU Accessory for range power supplies ABB s redundancy units are used to establish true redundancy which increases the availability of electrical systems significantly. 2CDC
PRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
RCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
UL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
Packaging (1) Package
Features Switching Regulator RoHS / conform (% lead free) High reflow temperature SMD package Adjustable output voltage Short circuit protection, thermal shutdown Remote ON/OFF control very low shutdown
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
Open Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
![Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/82/86441596.jpg "Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
Metal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. ide continuous voltage range: 30Vac ~ 465Vac 4. Operating temperature range: -40 C ~ +25 C Storage temperature range: -40 C ~ +50 C
RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W
2019-V1.0-0118 Specifications AC-DC Din Rail Mounted Power Supply IS-480 Series, 480W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
Load Com/Diff(KV) (Kg) Rating * V 240V 277V V 240V 277V V 240V 277V > / 4 0.
Approbations IS 15885 ( art 2 / Sec 13 ) Output Output Output Efficiency Max Case Input Max Input Inrush THD @ ower Surge Weight Envir. ower Voltage Current at Max Load Temp Current ower Current Max Load
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC10-48 S 05 W - M2 P HC Series Name Input Output Output Input Operating Temp. Remote
HAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
DC/DC Converter URB1D_LMD-10WR3 Series
DC/DC Converter FEATURES 10W, ultra wide input isolated & regulated single output DC-DC converter Ultra wide input voltage range (4:1) High efficiency up to 85% Enhanced isolation, isolation voltage: 2250VDC
4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
CX-SERIES ADVANCED BATTERY CHARGER
CX-SERIES ADVANCED BATTERY CHARGER Table of Content 1. IMPORTANT SAFETY INFORMATION... 2 1-1 General Safety Precautions... 2 1-2 Battery Precautions... 2 2. FEATURES... 3 2-1 Battery Charging Curve...
4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
HAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
C B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
N2POWER XLM240 AC-DC SERIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWER SUPPLY
N2POWE XLM240 AC-DC SEIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWE SUPPLY HIGHLIGHTS ITE & Medical switching power supply High efficiency up to 94% P.F.C. function > 0.9 < 0.5W no load input power
DC DC Converter High Precision constant voltage high efficiency dedicated to the LED panel MODEL: EF-DC-8A
DESCRIPTION: EF-DC-8A DC DC Converter, high efficiency Up to 96%, Use Aluminum solid capacitors. long life of 50,000 hours, high-precision constant voltage output, dedicated to 90w the following, all types
INDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
UNA SERIES Embedded Power Supply Features Model naming method UNA 350P / Applications UNA Conformity to RoHS Directive Product Line-up
SERIES 350PB, PN 350PB/350PN Specifications CH 2 3 5 Voltage Range (*)(*8) V AC85-265 (AC85-5 : Need output derating) Frequency (*)(*8) Hz 7-63 Power Factor (00/20VAC)(typ) (*5) 0.98 / 0.92 (Ta=25) Input
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to