Fall 1997 EE361: MIDTERM EXAM 2. This exam is open book and closed notes. Be sure to show all work clearly.

Size: px
Start display at page:

Download "Fall 1997 EE361: MIDTERM EXAM 2. This exam is open book and closed notes. Be sure to show all work clearly."

Transcription

1 NAME: STUDENT NUMBER: Fall 1997 EE361: MIDTERM EXAM 2 This exam is open book and closed notes. Be sure to show all work clearly points - Mechanical and Electrical Energy Relationships: A dc motor is rotating at 800 RPM with E a =1000 V and I a =10 A. Mechanical rotational losses are 200 W. (a) Find the useful mechanical torque. (Here, useful means that the torque is actually available to do work such as in lifting a weight, turning a fan, etc.) (b) Find the stored rotational energy, if the rotational inertia of the machine is J=0.25 kg-m 2. (Note: kg-m 2 N-m-s 2 )

2 2. 30 points - General Rotating Machine Relationship: A two pole cylindrical rotor AC motor can be modeled by the circuit parameters given below. The stator is connected to a source so that i s (t)=5sin377t A and the rotor to a source so that i r (t)=5a. The rotor is spinning at a constant rate of 3600 RPM. Neglect winding and rotational losses. Machine Parameters: Armature (stator): L ss =3.2 H N s =50 turns Field (rotor): L rr =0.8 H N r =25 turns Coupling: L sr =1.6cosθ m H (a) What is the stored magnetic energy in the rotating machine as a function of time? (b) What is the torque on the motor shaft? (c) What is the stator voltage as a function of time?

3 3. 15 points - Three Phase Induction Motor: A three phase 208 V two-pole 60 Hz induction motor when operating at full load has a slip of 5%. Circuit parameters are given below. Neglect core effects. Circuit Parameters (per phase model): Armature: R 1 =1.0 Ω X 1 =2.0 Ω Field: R 2 =0.6 Ω X 2 =1.5 Ω (a) Find the frequency of the rotor current when operating at full load? (b) Find the magnitude of the per phase rotor current referred to the stator when operating at full load?

4 4. 15 points - DC Machine: A shunt connected 200 V DC Motor has an armature resistance of R a =2Ω and a field resistance R f =200Ω.. When the motor draws 3 A, it is seen to rotate at 1000 RPM. Neglect brush voltage drop and rotational losses in answering the following. (a) What is the motor voltage constant K a? (b) What is the rotational speed if the motor draws 10 A with the same 200 V supply?

5 5. 15 points - Synchronous Machine: Consider a three phase synchronous generator connected to an infinite bus with the parameters given below. Circuit Parameters (per phase in p.u.): Armature resistance: R a 0.0 Synchronous reactance: X s =0.6 p.u. Internal voltage: E a =1.2 p.u. Infinite bus voltage: V t =1.0 p.u. (a) What is the rotor angle δ if the real power output is 1.5 p.u.? (b) What is the reactive power output for this system in p.u.?

6 6. (15 points) Short Answer. (a) Why are induction machines seldom used for electric power generation? (b) Why are synchronous machines less frequently used as motors? (c) A four pole single phase induction motor has a 60 Hz signal applied to the stator windings and runs at 5% slip. What is (are) the rotor current frequency(s)?

7 NAME: STUDENT NUMBER: Spring 2001 EE361: MIDTERM EXAM 2 This exam is open book and closed notes. Be sure to show all work clearly points - Three Phase Induction Motor: A three phase 25kW 500 V four-pole 60 Hz induction motor when operating at full load has a slip of 2%. Circuit parameters are given below. Neglect rotational losses. Circuit Parameters (per phase model, line to neutral): Stator: R 1 =0.5 Ω (0.05 p.u.) X 1 =1.0 Ω (0.1 p.u.) Rotor: R 2 =0.2 Ω (0.02 p.u.) X 2 =0.75 Ω (0.075 p.u.) Magnetization: X m =80 Ω (8.0 p.u.) (a) Find the frequency of the rotor current when operating at full load? (b) Find the power developed (i.e., the actual electrical power converted to mechanical power) when running at full load. Solution can be given in either per unit or SI units but mark solution clearly. (c) Find the mechanical torque under full load conditions. Solution should be in SI units.

8 2. 15 points - DC Machine: A shunt connected 200 V DC Motor has an armature resistance of R a =2Ω and a field resistance R f =200Ω.. When the motor draws 3 A, it is seen to rotate at 1000 RPM. Neglect brush voltage drop and rotational losses. What is the motor voltage constant K a?

9 3. 25 points - General Rotating Machine Relationship: A two pole cylindrical rotor AC motor can be modeled by the circuit parameters given below. The stator is connected to a source so that i s (t)=5sin377t A and the rotor to a source so that i r (t)=5a. The rotor is spinning at a constant rate of 3600 RPM. Neglect winding resistance and rotational losses. Machine Parameters: Armature (stator): L ss =0.8 H N s =25 turns Field (rotor): L rr =3.2 H N r =50 turns Coupling: L sr =1.6cosθ m H (a) What is the average mechanical torque on the motor shaft? Neglect the initial angle of θ m, i.e., let θ m =377t. (b) What is the terminal voltage (voltage across the stator terminals)?

10 4. 20 points - Synchronous Machine: Consider a three phase 10MVA 12kV synchronous generator connected to an infinite bus with the parameters given below. Solution can be given in either per unit or SI units but mark solution clearly. Circuit Parameters (per phase model, line to neutral): Armature resistance: R a 0.0 Synchronous reactance: X s =23 Ω (1.6 p.u.) Internal voltage: E a =8.31kV (1.2 p.u.) Infinite bus voltage: V t =6.93kV (1.0 p.u.) (a) What rotor angle(s), δ (0<δ<180 o ), will give a three phase real power output of 5 MW (0.5 p.u.)? (b) If there is more than one solution to (a), which of the angles can the generator actually operate at? (c) What is the reactive power output for this generator at this operating point?

11 5. (15 points) Short Answer. (a) A two pole single phase induction motor has a 60 Hz signal applied to the stator windings and runs at 5% slip. What is (are) the rotor current frequency(s)? (b) Match the following rotating machines to a typical application. (Just draw a line matching the machine to the application) Machine type Synchronous paper) Induction Brushless DC Stepper motor Typical application Paper feeder in printer (precise positioning of Hard disk drive (constant speed spinning of disk) Compressor or pump Large hydro generator unit

12 ECE 325: MIDTERM EXAM II Fall 2013 NAME: STUDENT NUMBER: There are 6 problems be sure to show all work clearly. 1. Three phase Induction Motor (20 points). For a three phase 381V, 60 Hz, 6 pole induction motor, you are given the per phase parameters below. When operating at full load, this motor has a slip of 4%. Find: (a) the frequency (or frequencies) of the rotor current at full load, and (b) the mechanical power output neglecting any rotational losses. Motor parameters: R X 1 1 = 0. 2 W = 0. 6 W R X 2 2 = 10. W = 2. 0 W X m = 80 W

13 2. DC Motor and Mechanical/Electrical Energy Relationships (15 points). A series connected 250 V DC motor has a total armature and field winding impedance of R a + R f =50 W. A lab test reveals that the motor draws 1.5 A when operating at 1000 RPM. Neglect any brush voltage drop. Find: (a) the electrical torque developed under this operating condition, (b) the stored rotational energy, if the rotational inertia of the machine is J=0.25 kgm 2. (Note: kg-m 2 º N-m-s 2 ).

14 3. General Rotating Machine (20 points): A two pole cylindrical rotor AC generator can be modeled by the parameters given below. The field is connected to a source with i r (t)=10 A. The rotor is spinning at a constant rate of 1800 RPM and the stator is open circuited. Neglect winding and rotational losses. Machine Parameters: Armature (stator): L ss =0.4 H N s =40 turns Field (rotor): L rr =1.6 H N r =80 turns Coupling: L sr =0.8cosq m H (a) Find the stored magnetic energy in the machine as a function of time. (b) Find the open circuit stator voltage as a function of time.

15 4. Synchronous Machine (15 points): A three-phase synchronous generator is connected to a load (infinite bus) as sketched in the one-line diagram below. Circuit Parameters: Armature resistance: R a» 0.0 Synchronous reactance: X s =0.3 p.u. Internal voltage: E a =1.2 p.u. Terminal voltage: V t =1.0 p.u. (a) At what rotor angle d will the generator operate if the real power output is 1.5 p.u.? (b) What is the maximum possible power output for this generator in p.u.? ~ X s = 0. 5 V load = 1. 0 E a Ð d = 1. 3Ðd

16 5. Three phase fundamentals (10 points). Three 69 kv voltage sources are connected in a balanced wye configuration as sketched below. These are then connected to an unbalanced delta load with the values indicated in circuit below. Find the total real and reactive power delivered to the 3 phase load. V an j100 W 50 W V cn V bn + j100 W

17 6. Short Answer (20 points). (a) True or false. A three-phase induction motor (connected to a positive sequence three phase voltage source) can operate either clockwise or counterclockwise depending on the initial direction of rotation? Explain your answer, don t merely answer true or false. (b) What type of rotating machine is most commonly used for power generation? (c) A two pole single phase induction motor has a 50 Hz signal applied to the stator windings and runs at 5% slip. What is (are) the rotor current frequency(s)? (d) Select ONE of the motors listed below, identify a typical application, and then state why this motor is good for such an application. Stepper Permanent magnet Brushless DC Induction

DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1

DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help

More information

2014 ELECTRICAL TECHNOLOGY

2014 ELECTRICAL TECHNOLOGY SET - 1 II B. Tech I Semester Regular Examinations, March 2014 ELECTRICAL TECHNOLOGY (Com. to ECE, EIE, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~~

More information

R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]

R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M] Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question

More information

Scheme - I. Sample Question Paper

Scheme - I. Sample Question Paper Program Name Program Code Course Title Sample Question Paper : Diploma in Industrial Electronics : IE : Electrical Machines and Transformers Max. Marks : 70 Time : 3 Hrs. Q1. ATTEMPT ANY FIVE OF THE FOLLOWING.

More information

694 Electric Machines

694 Electric Machines 694 Electric Machines 9.1 A 4-pole wound-rotor induction motor is used as a frequency changer. The stator is connected to a 50 Hz, 3-phase supply. The load is connected to the rotor slip rings. What are

More information

Electrical Machines -II

Electrical Machines -II Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and

More information

Regulation: R16 Course & Branch: B.Tech EEE

Regulation: R16 Course & Branch: B.Tech EEE SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Regulation: R16 Course & Branch: B.Tech

More information

DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation

More information

The Wound-Rotor Induction Motor Part I

The Wound-Rotor Induction Motor Part I Experiment 1 The Wound-Rotor Induction Motor Part I OBJECTIVE To examine the construction of the three-phase wound-rotor induction motor. To understand exciting current, synchronous speed and slip in a

More information

Synchronous Generators I. EE 340 Spring 2011

Synchronous Generators I. EE 340 Spring 2011 Synchronous Generators I EE 340 Spring 2011 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is

More information

Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors

Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase 2. Which part of a three-phase squirrel-cage induction motor is a hollow core? 3. What are

More information

Unit-II Synchronous Motor

Unit-II Synchronous Motor Unit-II Synchronous Motor CONSTRUCTION OF THREE PHASE SYNCHRONOUS MOTOR PRINCIPLE OF OPERATION Prepared By P.Priyadharshini Ap/EEE - 1 - Note: 1. The average torque exerted on the rotor of synchronous

More information

Synchronous Generators I. Spring 2013

Synchronous Generators I. Spring 2013 Synchronous Generators I Spring 2013 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is then turned

More information

AE105 PRINCIPLES OF ELECTRICAL ENGINEERING JUNE 2014

AE105 PRINCIPLES OF ELECTRICAL ENGINEERING JUNE 2014 Q.2 a. Explain in detail eddy current losses in a magnetic material. Explain the factors on which it depends. How it can be reduced? IETE 1 b. A magnetic circuit with a single air gap is shown in given

More information

14 Single- Phase A.C. Motors I

14 Single- Phase A.C. Motors I Lectures 14-15, Page 1 14 Single- Phase A.C. Motors I There exists a very large market for single-phase, fractional horsepower motors (up to about 1 kw) particularly for domestic use. Like many large volume

More information

SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road QUESTION BANK (DESCRIPTIVE)

SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road QUESTION BANK (DESCRIPTIVE) SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : PSD (16EE223) Year & Sem: III-B.Tech & II-Sem Course & Branch: B.Tech

More information

Fachpraktikum Elektrische Maschinen. Experiments with a 400/ 690 V Squirrel Cage Induction Machine

Fachpraktikum Elektrische Maschinen. Experiments with a 400/ 690 V Squirrel Cage Induction Machine Fachpraktikum Elektrische Maschinen Experiments with a 400/ 690 V Squirrel Cage Induction Machine Prepared by Arda Tüysüz January 2013 1. Questions to answer before the experiment - Describe the operation

More information

ESO 210 Introduction to Electrical Engineering

ESO 210 Introduction to Electrical Engineering ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction

More information

COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES

COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT I SYNCHRONOUS RELUCTANCE

More information

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI -603104 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK VII SEMESTER EE6501-Power system Analysis

More information

Department of Electrical and Computer Engineering

Department of Electrical and Computer Engineering Page 1 of 1 Faculty of Engineering, Architecture and Science Department of Electrical and Computer Engineering Course Number EES 612 Course Title Electrical Machines and Actuators Semester/Year Instructor

More information

34 th Hands-On Relay School

34 th Hands-On Relay School 34 th Hands-On Relay School Generation Track Overview Lecture Generator Design, Connections, and Grounding 1 Generator Main Components Stator Core lamination Winding Rotor Shaft Poles Slip rings Stator

More information

R07 SET - 1

R07 SET - 1 R07 SET - 1 II B. Tech II Semester Supplementary Examinations April/May 2013 ELECTRICAL MACHINES - II (Electrical and Electronics Engineering) Time: 3 hours Max. Marks: 80 Answer any FIVE Questions All

More information

Question Bank ( ODD)

Question Bank ( ODD) Programme : B.E Question Bank (2016-2017ODD) Subject Semester / Branch : EE 6703 SPECIAL ELECTRICAL MACHINES : VII-EEE UNIT - 1 PART A 1. List the applications of synchronous reluctance motors. 2. Draw

More information

Contents. Review of Electric Circuitd. Preface ;

Contents. Review of Electric Circuitd. Preface ; Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current

More information

APGENCO/APTRANSCO Assistant Engineer Electrical Previous Question Papers Q.1 The two windings of a transformer is conductively linked. inductively linked. not linked at all. electrically linked. Q.2 A

More information

Lesson 16: Asynchronous Generators/Induction Generators

Lesson 16: Asynchronous Generators/Induction Generators Lesson 16: Asynchronous s/induction s ET 332b Ac Motors, s and Power Systems et332bind.ppt 1 Learning Objectives After this presentation you will be able to: Explain how an induction generator erates List

More information

Special-Purpose Electric Machines

Special-Purpose Electric Machines Special-Purpose Electric Machines The machines introduced in this lecture are used in many applications requiring fractional horsepower, or the ability to accurately control position, velocity or torque.

More information

QUESTION BANK SPECIAL ELECTRICAL MACHINES

QUESTION BANK SPECIAL ELECTRICAL MACHINES SEVENTH SEMESTER EEE QUESTION BANK SPECIAL ELECTRICAL MACHINES TWO MARK QUESTIONS 1. What is a synchronous reluctance 2. What are the types of rotor in synchronous reluctance 3. Mention some applications

More information

5. The force required to bring an object weighing 65 lb from rest to a speed of 50 fps in 10 sec is approximately

5. The force required to bring an object weighing 65 lb from rest to a speed of 50 fps in 10 sec is approximately Student ID: 53703105 Exam: 4341RR - Industrial Motor Applications When you have completed your exam and reviewed your answers, click Submit Exam. Answers will not be recorded until you hit Submit Exam.

More information

10. Starting Method for Induction Motors

10. Starting Method for Induction Motors 10. Starting Method for Induction Motors A 3-phase induction motor is theoretically self starting. The stator of an induction motor consists of 3-phase windings, which when connected to a 3-phase supply

More information

AC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque.

AC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque. Various types of AC motors are used for specific applications. By matching the type of motor to the appropriate application, increased equipment performance can be obtained. EO 1.5 EO 1.6 EO 1.7 EO 1.8

More information

SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR

SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : ET(16EE212) Year & Sem: II-B.Tech & II-Sem UNIT I DC GENERATORS Course

More information

DC CIRCUITS ELECTROMAGNETISM

DC CIRCUITS ELECTROMAGNETISM DC CIRCUITS 1. State and Explain Ohm s Law. Write in brief about the limitations of Ohm s Law. 2. State and explain Kirchhoff s laws. 3. Write in brief about disadvantages of series circuit and advantages

More information

Iowa State University Electrical and Computer Engineering. E E 452. Electric Machines and Power Electronic Drives

Iowa State University Electrical and Computer Engineering. E E 452. Electric Machines and Power Electronic Drives Electrical and Computer Engineering E E 452. Electric Machines and Power Electronic Drives Laboratory #12 Induction Machine Parameter Identification Summary The squirrel-cage induction machine equivalent

More information

Introduction. Introduction. Switched Reluctance Motors. Introduction

Introduction. Introduction. Switched Reluctance Motors. Introduction UNIVERSITY OF TECHNOLOGY, SYDNEY FACULTY OF ENGINEERING 48550 Electrical Energy Technology Switched Reluctance Motors Topics to cover: 1. Introduction 2. Structures & Torque Production 3. Drive Circuits

More information

Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 25 kw to 10 MVA or less)

Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 25 kw to 10 MVA or less) Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 25 kw to 10 MVA or less) Interconnection Customer Contact Information Name Alternative Contact Information (if different

More information

SYLLABUS 1. SYNCHRONOUS GENERATOR 9 2. SYNCHRONOUS MOTOR 8

SYLLABUS 1. SYNCHRONOUS GENERATOR 9 2. SYNCHRONOUS MOTOR 8 SYLLABUS 1. SYNCHRONOUS GENERATOR 9 Constructional details Types of rotors emf equation Synchronous reactance Armature reaction Voltage regulation EMF, MMF, ZPF and A.S.A methods Synchronizing and parallel

More information

St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad

St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad-500 014 Subject: STATIC DRIVES Class : EEE III TUTORIAL QUESTION BANK Group I QUESTION BANK ON SHORT ANSWER QUESTION UNIT-I 1 What is meant by electrical

More information

Electrical Theory. Generator Theory. PJM State & Member Training Dept. PJM /22/2018

Electrical Theory. Generator Theory. PJM State & Member Training Dept. PJM /22/2018 Electrical Theory Generator Theory PJM State & Member Training Dept. PJM 2018 Objectives The student will be able to: Describe the process of electromagnetic induction Identify the major components of

More information

Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors

Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase motor? Stator and Rotor 2. Which part of a three-phase squirrel-cage induction motor is a

More information

Lab 6: Wind Turbine Generators

Lab 6: Wind Turbine Generators Lab 6: Wind Turbine Generators Name: Pre Lab Tip speed ratio: Tip speed ratio (TSR) is defined as: Ω, where Ω=angular velocity of wind, and R=radius of rotor (blade length). If the rotational speed of

More information

GROUP OF INSTITUTIONS :: PUTTUR UNIT I SINGLE PHASE TRANSFORMERS

GROUP OF INSTITUTIONS :: PUTTUR UNIT I SINGLE PHASE TRANSFORMERS SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Course & Branch: B.Tech EEE Regulation:

More information

INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad

INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :

More information

Science 30 Unit C Electromagnetic Energy

Science 30 Unit C Electromagnetic Energy Science 30 Unit C Electromagnetic Energy Outcome 1: Students will explain field theory and analyze its applications in technologies used to produce, transmit and transform electrical energy. Specific Outcome

More information

Mechatronics and Electrical Drives

Mechatronics and Electrical Drives Fachgebiet eistungselektronik und Elektrische Antriebstechnik Prof. Dr. Ing. Joachim Böcker Mechatronics and Electrical Drives 29.02.2016 Surname: Student number: First name: Course of Study: Task: (Points)

More information

UNIT-I ALTERNATORS PART-A

UNIT-I ALTERNATORS PART-A UNIT-I ALTERNATORS 1. What principle is used in Alternators? 2. What are the requirements of an alternator? 3. Mention the types of alternator rotor. 4. What is hunting in alternators? 5. What are the

More information

9/7/2010. Chapter , The McGraw-Hill Companies, Inc. MOTOR CLASSIFICATION. 2010, The McGraw-Hill Companies, Inc.

9/7/2010. Chapter , The McGraw-Hill Companies, Inc. MOTOR CLASSIFICATION. 2010, The McGraw-Hill Companies, Inc. Chapter 2 MOTOR CLASSIFICATION 1 In general, motors are classified according to the type of power used (AC or DC) and the motor's principle of operation. AC DC Motor Family Tree 2 DC MOTOR CONNECTIONS

More information

Full Voltage Starting (Number of Starts):

Full Voltage Starting (Number of Starts): Starting Method Full Voltage Starting (Number of Starts): Squirrel cage induction motors are designed to accelerate a NEMA inertia along a NEMA load curve with rated voltage applied to the motor terminals.

More information

(d) None of the above.

(d) None of the above. Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution affiliated to Anna niversity) CCET II (2016 Regulation) Name of Programme: B.E. (EEE) Course Code & Course Title:

More information

Single Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX

Single Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX Single Phase Induction Motor Dr. Sanjay Jain Department Of EE/EX Application :- The single-phase induction machine is the most frequently used motor for refrigerators, washing machines, clocks, drills,

More information

Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kva to 10 MVA or less)

Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kva to 10 MVA or less) Section 466.APPENIX C Levels 2 to 4 Application Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kva to 10 MVA or less) Interconnection Customer Contact Information

More information

Mechatronics Chapter 10 Actuators 10-3

Mechatronics Chapter 10 Actuators 10-3 MEMS1049 Mechatronics Chapter 10 Actuators 10-3 Electric Motor DC Motor DC Motor DC Motor DC Motor DC Motor Motor terminology Motor field current interaction Motor commutator It consists of a ring of

More information

Single Phase Induction Motors

Single Phase Induction Motors Single Phase Induction Motors Prof. T. H. Panchal Asst. Professor Department of Electrical Engineering Institute of Technology Nirma University, Ahmedabad Introduction As the name suggests, these motors

More information

Part- A Objective Questions (10X1=10 Marks)

Part- A Objective Questions (10X1=10 Marks) Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution) CCET 3(2016Regulation) Name of Programme: B.E. (EEE) Course Code&Course Title: 16EET41 & Synchronous & Induction

More information

Three-Phase Induction Motor With Frequency Inverter

Three-Phase Induction Motor With Frequency Inverter Objectives Experiment 9 Three-Phase Induction Motor With Frequency Inverter To be familiar with the 3-phase induction motor different configuration. To control the speed of the motor using a frequency

More information

Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II. Handout: AC Commutator Motors

Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II. Handout: AC Commutator Motors Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II Handout: AC Commutator Motors Prepared by: Prof. T. H. Panchal Learning Objective: Introduction

More information

2. Draw the speed-torque characteristics of dc shunt motor and series motor. (May2013) (May 2014)

2. Draw the speed-torque characteristics of dc shunt motor and series motor. (May2013) (May 2014) UNIT 2 - DRIVE MOTOR CHARACTERISTICS PART A 1. What is meant by mechanical characteristics? A curve is drawn between speed-torque. This characteristic is called mechanical characteristics. 2. Draw the

More information

ECE 325 Electric Energy System Components 6 Three Phase Induction Motors. Instructor: Kai Sun Fall 2016

ECE 325 Electric Energy System Components 6 Three Phase Induction Motors. Instructor: Kai Sun Fall 2016 ECE 325 Electric Energy System Components 6 Three Phase Induction Motors Instructor: Kai Sun Fall 2016 1 Content (Materials are from Chapters 13-15) Components and basic principles Selection and application

More information

Chapter 3.2: Electric Motors

Chapter 3.2: Electric Motors Part I: Objective type questions and answers Chapter 3.2: Electric Motors 1. The synchronous speed of a motor with 6 poles and operating at 50 Hz frequency is. a) 1500 b) 1000 c) 3000 d) 750 2. The efficiency

More information

Electrical Machines, Drives, and Power Systems Theodore Wildi Sixth Edition

Electrical Machines, Drives, and Power Systems Theodore Wildi Sixth Edition Electrical Machines, Drives, and Power Systems Theodore Wildi Sixth Edition Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world Visit us

More information

Unit III-Three Phase Induction Motor:

Unit III-Three Phase Induction Motor: INTRODUCTION Unit III-Three Phase Induction Motor: The three phase induction motor runs on three phase AC supply. It is an ac motor. The power is transferred by means of induction. So it is also called

More information

Synchronous Motor Drives

Synchronous Motor Drives UNIT V SYNCHRONOUS MOTOR DRIVES 5.1 Introduction Synchronous motor is an AC motor which rotates at synchronous speed at all loads. Construction of the stator of synchronous motor is similar to the stator

More information

Permanent Magnet Synchronous Frameless Torque Motors KSO/H Series

Permanent Magnet Synchronous Frameless Torque Motors KSO/H Series Permanent Magnet Synchronous Frameless Torque Motors KSO/H Series Icpe 313 Splaiul Unirii 030138, Bucureşti, România tel./ fax +40213467233 email servo@icpe.ro web http://www.icpe.ro/ Model Number KSO/H

More information

Instructor. Payam Zarbakhsh. Department of electrical electronics engineering

Instructor. Payam Zarbakhsh. Department of electrical electronics engineering Instructor Payam Zarbakhsh Department of electrical electronics engineering Electrical Machines Induction Motors_Note(1) Comparing with synchronous motor No dc field current is required to run the machine.

More information

Electrical Machines II. Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit

Electrical Machines II. Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit Electrical Machines II Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit Asynchronous (Induction) Motor: industrial construction Two types of induction

More information

CHAPTER 5 FAULT AND HARMONIC ANALYSIS USING PV ARRAY BASED STATCOM

CHAPTER 5 FAULT AND HARMONIC ANALYSIS USING PV ARRAY BASED STATCOM 106 CHAPTER 5 FAULT AND HARMONIC ANALYSIS USING PV ARRAY BASED STATCOM 5.1 INTRODUCTION Inherent characteristics of renewable energy resources cause technical issues not encountered with conventional thermal,

More information

Figure 4.1.1: Cartoon View of a DC motor

Figure 4.1.1: Cartoon View of a DC motor Problem 4.1 DC Motor MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Electrical Engineering and Computer Science 6.007 Applied Electromagnetics Spring 2011 Problem Set 4: Forces and Magnetic Fields

More information

Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1

Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1 Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1 OBJECT 1. To determine the general performance of a squirrel motors 2. To observe the characteristics of induction generators.

More information

CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR

CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR 100 CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR 6.1 INTRODUCTION Conventional energy resources are not sufficient to meet the increasing electrical power demand. The usages of

More information

BHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR GENERAL Make : Jinan Power Equipment Factory Type : WX2

BHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR GENERAL Make : Jinan Power Equipment Factory Type : WX2 BHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR 1.00.00 GENERAL 1.01.00 Make : Jinan Power Equipment Factory 1.02.00 Type : WX21Z-073LLT 1.03.00 Reference Standard : GB/T7064-2002

More information

VIII. Three-phase Induction Machines (Asynchronous Machines) Induction Machines

VIII. Three-phase Induction Machines (Asynchronous Machines) Induction Machines VIII. Three-phase Induction Machines (Asynchronous Machines) Induction Machines 1 Introduction Three-phase induction motors are the most common and frequently encountered machines in industry simple design,

More information

A Practical Primer On Motor Drives (Part 11): AC And DC Motor Types

A Practical Primer On Motor Drives (Part 11): AC And DC Motor Types A Practical Primer On Motor Drives (Part 11): AC And DC Motor Types by Ken Johnson, Teledyne LeCroy, Chestnut Ridge, N.Y. ISSUE: December 2016 In the previous part in this series, the basic principles

More information

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of electrical machines

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of electrical machines Page 1 of 5 Title Demonstrate and apply knowledge of electrical machines Level 5 Credits 15 Purpose This unit standard covers knowledge and the application of d.c. and a.c. electrical machines for engineers.

More information

Maryland Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kw to 10 MW or less)

Maryland Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kw to 10 MW or less) Maryland Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kw to 10 MW or less) Interconnection Customer Contact Information Name: Address: Alternative Contact Information

More information

Unit 34 Single-Phase Motors

Unit 34 Single-Phase Motors Unit 34 Single-Phase Motors Objectives: Unit 34 Single-Phase Motors List the different types of split-phase motors. Discuss the operation of split-phase motors. Reverse the direction of rotation of a splitphase

More information

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Name Course Code Class Branch INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad - 500 0 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING : Static Drives : A60225 : III -

More information

Three-Phase Induction 208V Motor with MATLAB

Three-Phase Induction 208V Motor with MATLAB EXPERIMENT Induction motor with Matlab Three-Phase Induction Motors 208V LL OBJECTIVE This experiment demonstrates the performance of squirrel-cage induction motors and the method for deriving electrical

More information

Short Term Course On Hydropower Development Engineering (Electrical) for Teachers of Polytechnics in Uttarakhand L33-2

Short Term Course On Hydropower Development Engineering (Electrical) for Teachers of Polytechnics in Uttarakhand L33-2 Short Term Course On Hydropower Development Engineering (Electrical) for Teachers of Polytechnics in Uttarakhand ( July 14-18, 2007) Lecture on L33-2 By S.N.Singh Senior Scientific officer ALTERNATE HYDRO

More information

The instantaneous torque is pulsating. The average value of the torque is

The instantaneous torque is pulsating. The average value of the torque is Problems 113 2. ω m = ω s ω r. Both stator and rotor windings carry ac currents at different frequencies and the motor runs at an asynchronous speed (ω m 6¼ ω s, ω m 6¼ ω r ). From Eq. 3.50, the torque

More information

AGN Single Phase Loading for Re- Connectable 3-Phase Windings

AGN Single Phase Loading for Re- Connectable 3-Phase Windings Application Guidance Notes: Technical Information from Cummins Alternator Technologies AGN 154 - Single Phase Loading for Re- Connectable 3-Phase Windings TECHNICAL OVERVIEW It must be accepted; when reconnecting

More information

PDF - TYPES OF DC MOTOR DOCUMENT

PDF - TYPES OF DC MOTOR DOCUMENT 10 November, 2017 PDF - TYPES OF DC MOTOR DOCUMENT Document Filetype: PDF 334.03 KB 0 PDF - TYPES OF DC MOTOR DOCUMENT DC motors are very easy to implement and most commonly used actuators in robots. The

More information

Lab Electrical Power Engineering I

Lab Electrical Power Engineering I INSTITUT FÜR ELEKTRISCHE MASCHINEN RHEINISCH-WESTFÄLISCHE TECHNISCHE HOCHSCHULE AACHEN Lab Electrical Power Engineering I Test 3: Induction machine with squirrel cage rotor and slip ring rotor 1 Experiment

More information

Comprehensive Technical Training

Comprehensive Technical Training Comprehensive Technical Training For Sugar Mills Staff on Operation & Maintenance of Baggase Based HP Cogeneration System Schedule: 10 th July to 13 th July, 2017 A.C. GENERATOR Topics Covered. Introduction.

More information

AIT EHMF Collaborative project

AIT EHMF Collaborative project AIT EHMF Collaborative project Performance test results for characteristic of Permanent magnet synchronous generator: a. Specification of the machine(pmzg132s-4) being tested: Machine Type : Permanent

More information

PAC TRAINING PUMP MOTORS

PAC TRAINING PUMP MOTORS PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary

More information

EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION

EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION 1. What is meant by drive and electric drive? Machines employed for motion control are called drives and may employ any one of the prime movers for

More information

2 kw Electromechanical Training Systems

2 kw Electromechanical Training Systems 2 kw Electromechanical Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 Load Modules 3 Metering Modules 3 Courseware 3 Features

More information

2-marks question bank UNIT I - TRANSFORMERS UNIT II: AC MACHINES

2-marks question bank UNIT I - TRANSFORMERS UNIT II: AC MACHINES 2-marks question bank UNIT I - TRANSFORMERS 1. What is all day efficiency? 2. What are the applications of auto transformers? 3. Why transformer rating is expressed in KVA? 4. Does transformer draw any

More information

EXPERIMENT 19. Starting and Synchronizing Synchronous Machines PURPOSE: BRIEFING: To discover the method of starting synchronous motors.

EXPERIMENT 19. Starting and Synchronizing Synchronous Machines PURPOSE: BRIEFING: To discover the method of starting synchronous motors. EXPERIMENT 19 Starting and Synchronizing Synchronous Machines PURPOSE: To discover the method of starting synchronous motors. BRIEFING: When three-phase is applied to the stator of a three-phase motor,

More information

BELT-DRIVEN ALTERNATORS

BELT-DRIVEN ALTERNATORS CHAPTER 13 BELT-DRIVEN ALTERNATORS INTRODUCTION A generator is a machine that converts mechanical energy into electrical energy using the principle of magnetic induction. This principle is based on the

More information

HCI 534E/544E - Technical Data Sheet

HCI 534E/544E - Technical Data Sheet HCI 34E/44E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards

More information

HCI 434E/444E - Technical Data Sheet

HCI 434E/444E - Technical Data Sheet HCI 434E/444E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards

More information

Fachpraktikum Elektrische Maschinen. Theory of Induction Machines

Fachpraktikum Elektrische Maschinen. Theory of Induction Machines Fachpraktikum Elektrische Maschinen Theory of Induction Machines Prepared by Arda Tüysüz January 2013 Fundamentals Induction machines (also known as asynchronous machines) are by far the most common type

More information

ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors

ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors (2 of 4) Text Book: Chapter 5 Electric Motors, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015.

More information

Technical Guide No. 7. Dimensioning of a Drive system

Technical Guide No. 7. Dimensioning of a Drive system Technical Guide No. 7 Dimensioning of a Drive system 2 Technical Guide No.7 - Dimensioning of a Drive system Contents 1. Introduction... 5 2. Drive system... 6 3. General description of a dimensioning

More information

ST. ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY 9001:2015 CERTIFIED INSTITUTION) ANGUCHETTYPALAYAM, PANRUTI

ST. ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY 9001:2015 CERTIFIED INSTITUTION) ANGUCHETTYPALAYAM, PANRUTI ST. ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY (AN ISO 9001:2015 CERTIFIED INSTITUTION) ANGUCHETTYPALAYAM, PANRUTI 607 110. EE6504 ELECTRICAL MACHINES - II UNIT I SYNCHRONOUS GENERATOR PART A 1. What

More information

UNIT-1 Drive Characteristics

UNIT-1 Drive Characteristics UNIT-1 Drive Characteristics DEFINITION: Systems employed for motion control are called as DRIVES Drives may employ any of the prime movers such as diesel or petrol engine, gas or steam turbines, steam

More information

PSNH INTERCONNECTION REQUEST

PSNH INTERCONNECTION REQUEST PSNH INTERCONNECTION REQUEST Send the completed Interconnection Request and required attachments to: Public Service of New Hampshire Attn: Michael Motta, Senior Engineer Supplemental Energy Sources P.

More information

IT 318 SUPPLEMENTARY MATERIAL CHAPTER 4

IT 318 SUPPLEMENTARY MATERIAL CHAPTER 4 IT 318 SUPPLEMENTARY MATERIAL CHAPTER 4 Electric Motors V. 2013 BARRY M. LUNT Brigham Young University Table of Contents Chapter 4: Electric Motors... 2 Overview... 2 4-1 Commutation... 2 4-2 Stepper Motors...

More information