CHARGER. G-FORCE, Inc. INSTRUCTION MANUAL. DC Balance Charger & Discharger. Products by

Size: px
Start display at page:

Download "CHARGER. G-FORCE, Inc. INSTRUCTION MANUAL. DC Balance Charger & Discharger. Products by"

Transcription

1 DC Balance Charger & Discharger CHARGER INSTRUCTION MANUAL Products by G-FORCE, Inc. Mare-kanda Bld.9F, 1-3-1, Kajicho, Chiyoda-ku, Tokyo, , JAPAN Copyright 2014 G FORCE, Inc. All Right Reserved.

2 INTRODUCTION SPECIAL FEATURES WARNING AND SAFETY NOTES LITHIUM BATTERY CONNECTION DIAGRAM PROGRAM FLOW CHART LITHIUM BATTERY(LIPO/LIFE/LIION)PROGRAM Charging Lithium Battery At Balance Mode Charging Of Lithium Battery fast' Charging Of Lithium Battery 'storage' Control Of Lithium Battery Discharging Lithium Battery NIMH/NICD BATTERY PROGRAM Charging Of Nimh/nicd Battery Charging Nimh/nicd Battery In The Auto Charge Mode Charging Nimh/nicd Battery In Re-peak Charge Mode Charge/discharge & Discharge/charge Cycle Of Nimh/nicd Battery PB( LEAD-SULPHURIC ACID) BATTERY PROGRAM Charging Of Pb Battery Discharging Of Pb Battery USING THE CHARGE CONTROL SOFTWARE CHARGE MASTER BATTERY MEMORY SET LITHIUM BATTERY METER SYSTEM SET UP VARIOUS INFORMATION DURING THE PROCESS WARNING AND ERROR MESSAGESPECIFICATION LIABILITY EXCLUSION Congratulations on your choice of the G-force G6 balance charger/ discharger. The unit is simple to use, but the operation of a sophisticated automatic charger such as G-force G6 balance charger/discharger does require some knowledge on the part of the user. These operating instructions are designed to ensure that you quickly become familiar with its functions. It is therefore important that you read right through the Operating Instructions, Warning and Safety Notes before you attempt to use your new automatic charger for the first time. We hope you have many years of pleasure and success with your new battery charger. G-force G6 balance charger/discharger is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types. With integral equalizer for six-cell, Lithium-Polymer (LiPo), Lithium-Ferrum (LiFe) and Lithium-Ion (LiIon) batteries. Maximum 10A charge current; maximum 80W charge power; can be powered by a 12 Volt car battery or from 100V-240V via the built in switch-mode power supply. When a Nickel battery is fully charged, the unit terminates the process using the Delta-Peak method. Lithium and lead (Pb) batteries are charged using the CC-CV method. The fan cooling system is so smart and efficient. The fan speed is controlled by internal temperature sensor. The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage. It can be dangerous to mis-handle batteries and battery chargers, as there is always a risk of batteries catching fire and exploding. Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY NOTES before you use the charger for the first time. 01

3 Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist! Scroll Through the Main Menu any Charge Processes After Values Cells in Balance Charge Mode See the Status of Individual Resume or Charge Processes Confirm an Action DC Input Power Cable 11-18V AC Temp Sensor USB Port for PC Control & Firmware Upgrade LCD Screen Balance Socket Port Pitch=2.54mm Battery Socket G-force G6 balance charger/discharger features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users! G-force G6 balance charger/discharger employs an individual-cellvoltage balancer. It isn't necessary to connect an external balancer for balance charging. During the process of discharging, G-force G6 balance charger/ discharger can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal. G-force G6 balance charger/discharger is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe series of batteries. Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery

4 1 to 3 cyclic and continuous process of charge>discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the battery's activity. The charger can store up to 10 different charge/discharge profiles for your convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting. The charger allows user to change the end voltage. The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage. In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making certain the battery is fully charged, and for checking how well the battery receives fast charges. Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically. You can set up the upper limit of the charging current when charging your NiMH or NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode. The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value. The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. * You can also limit the maximum process time to avoid any possible defect. The free Charge Master software gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge date in real-time graphs. And you can initiate, control charging and update firmware from Charge Master

5 WARNING AND SAFETY NOTES These warnings and safety notes are particularly important. Please follow the instructions for maximum safety; otherwise the charger and the battery can be damaged or at worst it can cause a fire. Never leave the charger unattended when it is connected to its power supply. If any malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the operation manual. Keep the charger well away from dust, damp, rain, heat, direct sunshine and vibration. Never drop it. The allowable DC input voltage is 11-18V DC. This charger and the battery should be put on a heat-resistant, non-flammable and non-conductive surface. Never place them on a car seat, carpet or similar surface. Keep all flammable volatile materials away from the operating area. Make sure you know the specifications of the battery to be charged or discharged to ensure it meets the requirements of this charger. If the program is set up incorrectly, the battery and charger may be damaged. Fire or explosion can occur due to overcharging. This warranty is not valid for any damage or subsequent damage arising as a result of a misuse or failure to observe the procedures outlined in this manual. To avoid short circuiting between the charge lead, always connect the charge cable to the charger first, then connect the battery. Reverse the sequence when disconnecting. Never attempt to charge or discharge the following types of batteries: A battery pack which consists of different types of cells (including different manufacturers) A battery that is already fully charged or just slightly discharged Non-rechargeable batteries (pose an explosion hazard) A faulty or damaged battery A battery fitted with an integral charge circuit or a protection circuit WARNING AND SAFETY NOTES Batteries installed in a device or which are electrically linked to other components Batteries that are not expressly stated by the manufacturer to be suitable for the currents the charger delivers during the charge process Please bear in mind the following points before commencing charging: Did you select the appropriate program suitable for the type of battery you are charging? Did you set up adequate current for charging or discharging? Have you checked the battery voltage? Lithium battery packs can be wired in parallel and in series, i.e. a 2-cell pack can be 3.7V (in parallel) or 7.4V (in series). Have you checked that all connections are firm and secure? Make sure there are no intermittent contacts at any point in the circuit. Standard Battery Parameters Nominal Voltage Max Charge Voltage Storage Voltage Allowable Fast Charge Min. Discharge Voltage LiPo 3.7V/cell 4.2V/cell 3.8V/cell 1C LiIon 3.6V/cell 4.1V/cell 3.7V/cell 1C LiFe 3.3V/cell 3.6V/cell 3.3V/cell 4C NiCd 1.2V/cell 1.5V/cell V/cell V/cell V/cell V/cell V/cell 1.8V/cell Be very careful to choose the correct voltage for different types of battery otherwise you may cause damage to the batteries. Incorrect settings could cause the cells to fire or explode. n/a 1C-2C MiMH 1.2V/cell 1.5V/cell n/a 1C-2C Pb 2.0V/cell 2.46V/cell n/a 0.4C 06 07

6 WARNING AND SAFETY NOTES Charging During charge process, a specific quantity of electrical energy is fed into the battery. The charge quantity is calculated by multiplying charge current by charge time. The maximum permissible charge current varies depending on the battery type or its performance, and can be found in the information by the battery manufacturer. Only batteries that are expressly stated to be capable of quickcharge are allowed to be charged at rates higher than the standard charge current. Connect the battery to the terminal of the charger: red is positive and black is negative. Due to the difference between resistance of cable and connector, the charger can not detect resistance of the battery pack, the essential requirement for the charger to work properly is that the charge lead should be of adequate conductor cross-section, and high quality connectors which are normally goldplated should be fitted to both ends. Always refer to the manual by the battery manufacturer pertaining to charging methods. Operate according to their recommended charging current and charging time. lithium batteries, in particular, should be charged strictly according to the manufacturer s instruction. Close attention should be paid to the connection of lithium batteries. Do not attempt to disassemble the battery pack arbitrarily. Please get highlighted that lithium battery packs can be wired in parallel and in series. In the parallel connection, the battery's capacity is calculated by multiplying single the battery's capacity by the number of cells, bearing in mind that total voltage stays the same. If the voltage is imbalanced, it may cause a fire or explosion. Lithium batteries are recommended to charge in series. Discharging WARNING AND SAFETY NOTES The main purpose of discharging is to clean the residual capacity of the battery, or to reduce the battery' voltage to a defined level. The same attention should be paid to the discharging process as the charging process. The final discharge voltage should be set up correctly to avoid deep discharging. Lithium batteries cannot be discharged to lower than the minimum voltage, or it will cause a rapid loss of capacity or a total failure. Generally, lithium batteries don't need to be discharged. Please pay attention to the minimum voltage of lithium batteries to protect them. Some rechargeable batteries have a memory effect. If they are partly used and recharged before the whole charge is accomplished, they remember this and will only use that part of their capacity next time. This is a 'memory effect' It is said that NiMH and NiCd batteries are suffering from memory effect. NiCd has more memory effect than NiMH. Lithium batteries are recommended to be discharged partially rather than fully. Frequent full discharging should be avoided if possible. Instead, charge the battery more often or use a battery of larger capacity. Full capacity cannot be reached until it has been subjected to 10 or more charge cycles. The cyclic process of charge and discharge will optimize the capacity of battery pack

7 Important!!! Before connecting a battery it is absolutely essential to check one last time that you have set the parameters correctly. If the settings are incorrect, the battery may be damaged, and could even burst into flames or explode. To avoid short circuits between the banana plugs, always connect the charge leads to the charger first, and only then to the battery. Reverse the sequence when disconnecting the pack. The balance wire attached to the battery must be connected to the charger with the black wire aligned with the negative marking. Take care to maintain correct polarity! (See the wiring diagram below.) This diagram shows the correct way to connect your battery to the G- force G6 balance charger/discharger while charging in the balance charge program mode only. Failure to connect as shown in this diagram will damage this charger 10 11

8 PROGRAM FLOW CHART PROGRAM FLOW CHART PROGRAM SELECT LiPo BATT LiPo BALANCE 2.0A 7.4V (2S) LiPo CHARGE 2.0A 7.4V (2S) LiPo FAST CHG 2.0A 7.4V (2S) LiPo STORAGE 2.0A 7.4V (2S) PROGRAM SELECT Lilo BATT Lilo BALANCE 2.0A 7.2V (2S) Lilo CHARGE 2.0A 7.2V (2S) Lilo FAST CHG 2.0A 7.2V (2S) Lilo STORAGE 2.0A 7.2V (2S) PROGRAM SELECT LiFe BATT LiFe BALANCE 2.0A 6.6V (2S) LiFe CHARGE 2.0A 6.6V (2S) LiFe FAST CHG 2.0A 6.6V (2S) LiFe STORAGE 2.0A 6.6V (2S) PROGRAM SELECT Li BATT METER V V MAIN 0.00V H0.000V L0.000V PROGRAM SELECT SYSTEM SET-> Rest Time SAFETY TIME CHG>DCHG 10Min ON 120Min Capacity Cut-Off ON 5000mAH Key Beep ON Buzzer ON Batt Type VERSION 1.00 LOAD FACTORY SET PROGRAM SELECT BATT MEMORY [1] BATT TYPE BATT MEMORY SET LiPo BATT VOLTS 7.4V ( 2S ) CHARGE CURRENT 4.9A BATT MEMORY [1] C:4.9A D:2.2A BATT MEMORY [1] LiPo 7.4V (2S ) SAVE PROGRAM SAVE. SAVE PROGRAM CHARGER LOAD LiPo BALANCE 4.9A 7.4V(2S) LiPo CHARGE 4.9A 7.4V(2S) LiPo FAST CHG 4.9A 7.4V(2S) BATT MEMORY 2 NiMH 2.4V (2S) BATT TYPE BATT VOLTS CHARGE CURRENT MiMH 2.4V (2S) 3.3A SAVE PROGRAM DELTA PEAK SENSE 4Mv/C DSCH VOLTAGE 1.1V/CELL BATT MEMORY 3 BATT TYPE Pb 4V (2S) Pb BATT VOLTS 4.0V (2S) CHARGE CURRENT 3.3A PROGRAM SELECT Pb CHARGE Pb BATT 2.0A 2.0V (1P) Pb DISCHARGE 0.1A 2.0V (1P) PROGRAM SELECT NiCD BATT NiCD CHARGE NiCD Auto CHARGE NiCD DISCHARGE CURRENT 2.0A CURRENT 2.0A 0.1A CUT: 1.0V NiCD RE-PEAK PROGRAM SELECT NiMH CHARGE NiMH BATT CURRENT 2.0A NiMH Auto CHARGE CURRENT 2.0A NiMH DISCHARGE 0.1A CUT: 1.0V NiMH RE-PEAK LiPo DISCHARGE 2.0A 7.4V (2S) Lilo DISCHARGE 2.0A 7.2V (2S) LiFe DISCHARGE 2.0A 6.6V (2S) Input Power Low Cut-Off 11.0V Ext. Temp 0C Int. Temp 37C DSCH CURRENT 2.2A TEMPERATURE CUT-OFF 50C LiPo STORAGE 4.9A 7.4V(2S) TRICKLE 100mA DSCH CURRENT 2.2A DSCH CURRENT 1.5A SAVE PROGRAM NiCD CYCLE CHG>DCHG 1 NiMH CYCLE CHG>DCHG 1 DSCH VOLTAGE 3.0V/CELL TVC=YOUR RISK 4.20V LiPo DISCHARGE 2.2A 7.4V(2S) PEAK DELAY 1Min TEMPERATURE CUT-OFF 50C DSCH VOLTAGE 1.7V/CELL TEMPERATURE CUT-OFF 50C

9 LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM These programs are only suitable for charging and discharging Lithium batteries with a nominal voltage of 3.3V, 3.6V and 3.7V per cell. These batteries need to adopt different charge technique is termed a constant voltage(cv) and constant current(cc) method. The charge current varies according to the battery capacity and performance. The final voltage of charge process is also very important; it should be precisely matched with the charade voltage of the battery. They are 4.2V for LiPo, 4.1V for Lilo, and 3.6 V for LiFe. The charge current and nominal voltage as for cell count set on the charge program must always be correct for the battery to be charged. When you are willing to alter the parameter value in the program, press / key to make it blink then change the value with or key. The value will be stored by pressing / key once. CHARGING LITHIUM BATTERY AT BALANCE MODE This function is for balancing the voltage of Lithium-polymer battery cells while charging. In the balance mode, the battery needs to have a balance lead to connect to the battery's power lead to the output of charger. In this mode, the charging process will be different from ordinary charging mode. The internal processor of the charger will monitor the voltages of each cell of the battery pack and controls charging current that is feeding to each cell to normalise the voltage. Note: We recommends charging lithium batteries with a balance lead in the balance mode only The left side of the first line shows the type of battery you choose. The value on the left of the second line of the charger is current user set. After setting the current and voltage, press / key for more than 3 seconds to start the process.(charge current: A, voltage: 2S-6S). Number of cells Charging time Charging current Battery voltage Charged capacity CHARGING OF LITHIUM BATTERY This displays the number of cells you set up and the processor detects. s detected by the charger and cells set by you at the previous screen. If both numbers are identical you can start charging by press / button. If not, press Batt Type/ button to go back to previous screen to carefully check the number of cells of the battery pack before going ahead. This screen shows the real-time status during charge process. Press Batt Type/ key once to stop the charge process. This charging mode is for charging Li-Po/Ion/Fe battery without balance lead. Note: We recommends charging lithium batteries with a balance lead in the balance mode only. LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM The left side of the first line shows the type of battery you choose. The value on the left of the second line of the charger is current user set. After setting the current and voltage, press / key for more than 3 seconds to start the process.(charge current: A, voltage: 1S-6S). This displays the number of cells you set up and the processor detects. s detected by the charger and cells set by you at the previous 14 15

10 LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM Number Charging Battery of Charged time voltage cells capacity Charging current screen. If both numbers are identical you can start charging by press / button. If not, press Batt Type/ button to go back to previous screen to carefully check the number of cells of the battery pack before going ahead. This screen shows the real-time status during charge process. Press Batt Type/ key once to stop the charge process. FAST' CHARGING OF LITHIUM BATTERY The charging current is getting smaller as the process goes to the near end term of Lithium battery charging. To finish charging process earlier, this program eliminate certain term of CV process. Actually, the charging current will goes to 1/5 from the initial value to end the process while the normal charging goes to 1/10 during CV term. The charging capacity may be a bit smaller than normal charging but the process time will be reduced. Charging Supplied Current Number time capacity voltage of Charge battery cells current not, press Batt Type/ button to go back to previous screen to carefully check the number of cells of the battery pack before going ahead. This screen shows the real-time status during charge process. Press Batt Type/ key once to stop the charge process. 'STORAGE' CONTROL OF LITHIUM BATTERY This is for charging or discharging Lithium battery not to be used for the time being. The program will determine to charge or discharge the battery to the certain voltage depending on the voltage of the battery at its initial stage. They are different from the type of the battery, 3.75V for LiIo, 3.85V for LiPo and 3.3V for LiFe per cell. If the voltage of battery at its initial stage is over the voltage level to storage, the program will start to discharge. The value on the left side of the second lines sets the charge current. The value on the right side of the second lines sets the battery pack's voltage. After setting current and voltage, press Star/ for more than 3 seconds to start the process This displays the number of cells you set up and the processor detects. s detected by the charger and cells set by you at the previous screen. If both numbers are identical you can start charging by press / button. If At this screen, you can set up the current and voltage of the battery pack. Charging and discharging will make the batteries come to the voltage level of storage state. This displays the number of cells you set up and the processor detects. s detected by the charger and cells set by you at the previous screen. If both numbers are identical you can start charging by press / button. If not, press Batt Type/ button to go back to previous screen to carefully check the number of cells of the battery pack before going ahead

11 LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM NIMH/NICD BATTERY PROGRAM Current NumberElapsed Supplied voltage of time capacity cells Charge battery or discharge current DISCHARGING LITHIUM BATTERY Number of cells elapsed time Battery discharge voltage current Discharged capacity This screen shows the real-time status charging. Press Batt Type/ key once to stop the charge process. The value of discharge current on the left can not exceed 1C, and the value on the right can not be under the voltage recommended by the manufacturer to avoid deep discharging. Press / for more than 3 seconds to start discharging. This displays the number of cells you set up and the processor detects. s detected by the charger and cells set by you at the previous screen. If both numbers are identical you can start charging by press / button. If not, press Batt Type/ button to go back to previous screen to carefully check the number of cells of the battery pack before going ahead. This shows the real-time status of discharging, you can press Batt Type/ key to stop discharging. These programs are for charging or discharging NiMH (Nickel-Metal- Hydride) or NiCd (Nickel-Cadmium) battery commonly used for R/C model aplications. To alter the value at the display, press / key to make it blink then change the value using or key. The value will be stored by pressing / key once. To start the process, press / button for more than 3 seconds. CHARGING OF NIMH/ NICD BATTERY The charger will charge NiCd and NiMh batteries using the charge current set by the user. This program is for charging of NiCd/NiMH NiMH CHARGE CURRENT 2.0A batteries associated with R/C models applications. You can press / key to make it blink and Battery - + then or to change the parameter value. type Press / key to store the value. Elapsed Battery Batterytime Charge voltage Charged type current capacity The screen displays the current state of charging. To stop the process, press / key once. The audible sound indicates you the end of process. CHARGING NIMH/ NICD BATTERY IN THE AUTO CHARGE MODE In this program the charger detects the condition of the battery which is connected to the output and automatically charges the battery. In this mode, you should set up the upper limit of the charge current to avoid damage by excessive feeding current. Some batteries of low resistance and capacity can lead to higher current in the auto charging mode. N i M H A u t o C H A R G E C U R R E N T 2. 0 A Battery type This program is for charging of NiCd/NiMH batteries. You can press the / button to make it blink and then press the / button to change the parameter value. Press the / button more than 3 seconds to start the charging process

12 NIMH/NICD BATTERY PROGRAM N i M H 2. 0 A V A U T : Elapsed Battery Batterytime Charge voltage type current Charged capacity The screen indicates the discharging state. You can press / key to alter discharge current. Press / again to store the value. Press Batt Type/ key to stop discharging. The emitted sound alerts the end of discharging. CHARGING NIMH/ NICD BATTERY IN RE-PEAK CHARGE MODE Re-peak Charge Mode (NiCd and NiMH batteries only): In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for confirming the battery is fully charged, and for checking how well the battery receives fast charges. A five minute cool-off delay occurs after each re-peak charge. See the diagram below for using re-peak charge mode. To start charging, press the / button for 3 seconds. N i M H R E - P E A K N i M H 2. 0 A V R P C : Re-peak cycle: 1 shows on the display. Press the / button to make the re-peak cycle number blink and press the / button to find the desired number of times to re-peak. Press the / button to confirm selection. CHARGE/DISCHARGE & DISCHARGE/CHARGE CYCLE OF NIMH/NICD BATTERY NiMH CYCLE CHG>DCHG 1 Battery type NiMH 1.0A 7.42V C>D 022: Elapsed Battery time voltage Discharge or charge current Discharged or charged capacity NIMH/NICD BATTERY PROGRAM You can set up sequence on the left and the number of cycles on the right. Range of the cycle number is 1-3. Press Batt Type/ key to stop program, you can press / key to alter charge current. The sound indicates the end of program. Battery type Elapsed Charged time capacity Charge Battery current voltage 20 21

13 This is programmed for charging Pb(lead-sulphuric acid) battery with nominal voltage from 2 to 20V. Pb batteries are totally different from NiCd or NiMH batteries. They can only deliver relatievely lower current compare to their capacity, and similar restrictions definitely apply to charge. So the optimal charge current will be 1/10 of the capacity. Pb batteries must not be charged rapidly. Always follow the instruction is supplied by the manufacturer of battery. When you are willing to alter the parameter value in the program, press / key to make it blink then change the value with or key. The value will be stored by pressing / key once. Battery type Elapsed Battery time voltage Charge current Charged capacity Set up the charge current on the left and the nominal voltage of the battery on the right. The charge current ranges from 0.1 to 10.0A and the voltage should be matched with the battery being charged. the charge process by pressing / key for more than 3 seconds. The screen displays the state of charging process. To stop charging forcibly, press Batt type/ key once. The audible sound indicates you at the end of process Battery Elapsed type time Discharge current Battery voltage Discharged capacity Set discharge current on the left and final voltage on the right. The discharge current ranges from 0.1 to 2.0A. To start the process, press / key for more than 3 seconds. The screen displays the current state of discharge. You can alter the discharge current by pressing / key during the process. Once you change the current value, store it by pressing / button again. To stop discharging press Batt Type/ key once. The audible sound indicates you at the end of process. The free Charge Master software gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge date in real-time graphs. And you can initiate, control charging and update firmware from Charge Master. In order to connect the charger to the computer and use the Charge Master, you are required to use a USB cable which is not included in this package. The cable must be terminated on one end with A plug and the opposite end is terminated with micro plug which can connect to charger directly. The Charge Master can be download from

14 BATTERY MEMORY SET BATTERY MEMORY SET The charger can store up to 10 different charge/discharge profiles for your convenience, and the stored profiles can be recalled quickly without having to go through the setup process. BATT MEMORY 1 SET BATT TYPE LiPo '> 3 seconds the battery memory program, you can change the battery type(lipo, Lilo, LiFe, NiMH, NiCd, Pb battery), voltage, charge current by pressing the / button to make the value blink, the or ' + buttons to change the value, and / button once more to store the value and move to the next value or screen. (Note: The battery used for this example is a 2S(7.4V) Lipo battery. TVC=YOUR RISK 4.20V TEMPERATURE CUT-OFF C - + SAVE PROGRAM Set the terminal voltage, which can be adjusted ( V). Set the cut-off temperature, which can be adjusted(20 C/68 F-80 C/176 F). BATT VOLTS 7.4V(2S) - + Set the voltage and number of cells, along with the normal voltage (1-6S). SAVE PROGRAM SAVE '> 3 seconds ' Save the program set by pressing the / button for more than three seconds. CHARGE CURRENT 4.9A - + DSCH CURRENT 2.2A - + Set the charge current, which can be adjusted( a). Set the discharge current, which can be adjusted (0.1A-2.0A). BATT MEMORY 1 LiPo 7.4V(2S) next flash BATT MEMORY 1 C:4.9A D:2.2A This screen indicate the saved profile. Once you've saved a charge profile, you can load those settings to use later. To load a memory, you have to press the / Button for more than 3 seconds. Otherwise you only enter the setting mode. DSCH VOLTAGE 3.0V/CELL - + Set the discharge voltage, which can be adjusted (3.0V/CELL-3.3V/CELL). CHARGER LOAD This screen indicates that the charge profile is being loaded

15 LITHIUM BATTERY METER The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage. Please connect the battery to the charger main battery lead to battery socket and balance wires to balance socket. PROGRAM SELECT Li BATT METER Press the / button to enter the Lithium Battery Meter. SYSTEM SET UP It will be operated with the default value of the essential user settings when it is connected to a DC 11~18V batttery for the first time.the screen displays the following information in sequence and the user can change the value of parameter on each screen. When you are willing to alter the parameter value in the program, press / key to make it blink then change the value with or key. The value will be stored by pressing / key once. PROGRAM SELECT SYSTEM SET User set up starting screen V V The screen indicate each cell's voltage. MAIN 12.52V H4.190V L4.160V The screen indicate the total voltage, the highest voltage, the lowest voltage. Rest Time CHG>DCHG 10Min The battery is on the cyclic process of charge and discharge can often become warm after charge or discharge period. The program can insert a time delay to occur after each charge and discharge process to allow the battery adequate time to cool down before being subjected to the next process. The value ranges from 1 to 60 minutes. SAFETY TIME ON 120Min When you start a charge process, the integral safety timer automatically starts running at the same time. This is programmed to prevent overcharge the battery if it proves to be faulty, or if the termination circuit cannot detect the battery full. The value for the safety timer should be generous enough to allow a full charge of the battery. Safe timer Calculation When charging NiCd or NiMH batteries, divide the capacity by current, then divide the result by 26 27

16 SYSTEM SET UP VARIOUS INFORMATION DURING THE PROCESS Capacity Cut-Off ON 5000mAH 11.9, set this number as the value for safety timer setting. If the charger stopped at this threshold, about 140% of the capacity will have been fed into the battery. For example: Capacity Current Safety Time 2000mAh 2.0A (2000/2.0=1000)/11.9=84 minutes 3300mAh 3.0A (3300/3.0=1100)/11.9=92 minutes 1000mAh 1.2A (1000/1.2=833)/11.9=70 minutes This program sets the maximum charge capacity that will be supplied to the battery during charge. If the deltapack voltage is not detected nor the safety timer expired by any reason, this feature will automatically stop the process at the selected capacity value. LOAD FACTORY SET VERSION 1.00 Press and hold the / button for more than three seconds to load the factory set. This screen shows the version. VARIOUS INFORMATION DURING THE PROCESS You can inquire various information on LCD screen during charging or discharging process. When you press button the charger shows the establishment of user settings. And also you can monitor the voltage of individual cell by pressing button when the individual connection cable is linked to the Lithium battery being processed. Key Beep Buzzer ON ON The beep sounds at every time pressing the buttons to confirm your action. The beep or melody sounded at various times during operation to alert different mode changes. These audible sounds can be on or off. It comes to the final voltage when the program ended. Present input voltage. Input Power Low Cut-Off 11.0V This program monitors the voltage of input battery. If the voltage drops below the value you set the operation forcibly terminated to protect the input battery. Ext. Temp Int. Temp 0C 26C This screen shows the internal temperature. Displayed safety timer is turn on and duration of time in minutes. Ext. Temp Int. Temp 0C 37C This screen shows the external and internal temperature. Displayed capacity cut-off function is turn on and the setting value of capacity V V The battery is connected with balance lead, you can check voltage of each cell in the battery pack

17 WARNING AND ERROR MESSAGE SPECIFICATION It incorporates a variety of functions for the systems to verify processes and the state of the electronics. In case of an error the screen will display the cause of error and emit an audible sound. CONNECT ERROR CHECK MAIN PORT BALANCE CONNECT ERROR Incorrect polarity connected. The battery is interrupted. The Battery connection is wrong. DC IN TOO LOW Input voltage less than 11V. DC IN TOO HIGH The balance connect is wrong. Input voltage higher than 18V. SPECIFICATION DC Input Charge circuit power Charge current range Discharge current power Discharge current range Current drain for balancing port NiCd/NiMH battery cell count LiPo/LiFe/Lilon cell count Pb battery voltage Net weight Dimension 11-18Volt DC Input 80W A 10W A 200mA/cell 1-15Cells 1-6Cells 2-20V 300g 138.5x80.5x28.5mm CELL ERROR LOW VOLTAGE Voltage of one cell in the battery pack is too low. (stated values refer to one charger except built-in power supply, dimension & weight) CELL ERROR HIGH VOLTAGE Voltage of one cell in the battery pack is too high. THE SET CONTAINS CELL ERROR VOLTAGE-INVALID Voltage of one cell in the battery pack is invalid. 1. G-force G6 Charger CELL NUMBER INCORRECT INT.TEMP.TOO HI The cell number is wrong. The internal temperature of the unit goes too high. 2. Plug-in battery clamps 3. XT60 DC Cable 4. Dean connector with 1 EXT.TEMP.TOO HI OVER CHARGE CAPACITY LIMIT OVER TIME LIMIT The external temperature of the unit goes too high. The battery capacity is more than the maximum capacity which the user sets. The charging time is longer than the maximum charging time which the user sets. banana plug cable 5. Tamiya charging cable 6. Futaba RX charging cable 7. 3pin XH-TP/FP adaptor cable 2 BATTERY WAS FULL The battery voltage is higher than the maximum voltage which the user sets when charging in balance mode

18 This charger is designed and approved exclusively for use with the types of battery stated in these Instruction Manual. G-force accepts no liablility of any kind if the charger is used for any purpose other than that stated. We are unable to ensure that you follow the instructions supplied with the charger, and we have no control over the methods you employ for using, operating and maintaining the device. For this reason we are obliged to deny all liability for loss, damage or costs which are incurred due to the incompetent or incorrect use and operation of our products, or which are connected with such operation in any way. Unless otherwise prescribed by law, our obligation to pay compensation, regardless of the legal argument employed, is limited to the invoice value of those G-force products which were immediately and directly involved in the event in which the damage occurred. 32

INSTRUCTION MANUAL. UP650AC: 50W, 7.0A Multi Charger UP680AC: 80W, 7.0A Multi Charger

INSTRUCTION MANUAL. UP650AC: 50W, 7.0A Multi Charger UP680AC: 80W, 7.0A Multi Charger INSTRUCTION MANUAL UP650AC: 50W, 7.0A Multi Charger UP680AC: 80W, 7.0A Multi Charger TABLE OF CONTENTS Warning and Safety Notes...2 Introduction...4 Specification...4 Special Features...6 Warning and Safety

More information

100W 100W 10A. UP100AC DUO: 100W and 50W twin Charger

100W 100W 10A. UP100AC DUO: 100W and 50W twin Charger 100W 100W 50W 50W 10A UP100AC DUO: 100W and 50W twin Charger TABLE OF CONTENTS Warning and Safety Notes...2 Introduction...4 Specification...4 Special Features...6 Warning and Safety Notes...8 Lithium

More information

UP100AC INSTRUCTION MANUAL

UP100AC INSTRUCTION MANUAL UP100AC AC/DC Charger INSTRUCTION MANUAL 100W 10A TABLE OF CONTENTS Introduction... 2 Special Features... 4 Warning and Safety Notes... 6 Lithium Battery Connection Diagram... 10 Operation Diagram - Homepage...

More information

INTRODUCTION. Specifications. Operating voltage range:

INTRODUCTION. Specifications. Operating voltage range: INTRODUCTION INTRODUCTION Thank you for purchasing the EcoPower Electron 65 AC Charger. This product is a fast charger with a high performance microprocessor and specialized operating software. Please

More information

All specifications and figures are subject to change without notice. Printed in China Instruction Manual

All specifications and figures are subject to change without notice. Printed in China Instruction Manual All specifications and figures are subject to change without notice. Printed in China 2009 Instruction Manual WARNING AND SAFETY NOTES The beep to confirm users' operation sounds every time a button is

More information

G6P INSTRUCTION MANUAL AC/DC FAST CHARGER. G-FORCE, Inc. Professional Balance Charger / Discharger

G6P INSTRUCTION MANUAL AC/DC FAST CHARGER. G-FORCE, Inc.   Professional Balance Charger / Discharger INSTRUCTION MANUAL Products by G-FORCE, Inc. www.gforce-hobby.jp Mare-kanda Bld.9F, 1-3-1, Kajicho, Chiyoda-ku, Tokyo, 1-0044, JAPAN Copyright 2014 G FORCE, Inc. All Right Reserved. Professional Balance

More information

INSTRUCTION MANUAL. Built-In AC Power Supply. Professional Balance Charger/Discharger

INSTRUCTION MANUAL. Built-In AC Power Supply. Professional Balance Charger/Discharger INSTRUCTION MANUAL Built-In AC Power Supply Professional Balance Charger/Discharger TABLE OF CONTENTS INTRODUCTION... 02 SPECIAL FEATURES... 04 WARNING AND SAFETY NOTES... 06 PROGRAM FLOW CHART... 10 LITHIUM

More information

UP120AC INSTRUCTION MANUAL

UP120AC INSTRUCTION MANUAL UP0AC INSTRUCTION MANUAL x0w A TABLE OF CONTENTS Introduction... Special Features... 4 Warning and Safety Notes... 6 Lithium Battery Connection Diagram... 0 Operation Diagram - Homepage... Operation Diagram

More information

Intelligent Digital Balance Charger

Intelligent Digital Balance Charger SURE CHARGE 2000 www.racers-edge.com Intelligent Digital Balance Charger INTRODUCTION Thank you for purchasing the SureCharge 2000 LiPo Balance Charger by Racers Edge. This is a rapid charger with a high

More information

INSTRUCTION MANUAL C SkyRC Technology Co., Ltd Version 1.0

INSTRUCTION MANUAL C SkyRC Technology Co., Ltd Version 1.0 INSTRUCTION MANUAL C SkyRC Technology Co., Ltd. 2010 Version 1.0 TABLE OF CONTENTS TABLE OF CONTENTS Introduction 02 Special Features 03 Lithium Polymer Balance Charge Program Connection Diagram 05 Warning

More information

Specifications. Operating voltage range:

Specifications. Operating voltage range: INTRODUCTION INTRODUCTION Thank you purchasing the RC-6S AC PRO 80W Balance charger by OVERLANDER. This product is a rapid charger with a high performance microprocessor and specialized operating software.

More information

FINALLY, YOUR CHARGER GETS ITS OWN APP

FINALLY, YOUR CHARGER GETS ITS OWN APP Charge Master Fly your dream FINALLY, YOUR CHARGER GETS ITS OWN APP Manufactured by SKYRC TECHNOLOGY CO., LTD. www.skyrc.com Blue Version All specifications and figures are subject to change without notice.

More information

Professional Balance Charger / Discharger

Professional Balance Charger / Discharger Professional Balance Charger / Discharger Manufactured by SKYRC TECHNOLOGY CO.,LTD. www.skyrc.com All specifications and figures are subject to change without notice. Printed in China 2011 SkyRC Technology

More information

X2 Ultima Multi-Chemistry, High-Output, Dual-Charger System

X2 Ultima Multi-Chemistry, High-Output, Dual-Charger System X2 Ultima Multi-Chemistry, High-Output, Dual-Charger System Hitec RCD 2010 Version 1.0 TABLE OF CONTENTS Introduction...02 Special features...04 Warning and safety notes...07 Initial parameter set up (users

More information

AC Balance Charger / Discharger

AC Balance Charger / Discharger S60 AC Balance Charger / Discharger SkyRC Technology Co., Ltd. 2018 Version 1.4 TABLE OF CONTENTS INTRODUCTION SPECIAL FEATURES WARNING AND SAFETY NOTES PROGRAM FLOW CHART OPERATION OPERATING PROGRAM CHARGING

More information

SkyRC Technology Co., Ltd Version 1.0

SkyRC Technology Co., Ltd Version 1.0 SkyRC Technology Co., Ltd. 2014 Version 1.0 TABLE OF CONTENTS INTRODUCTION SPECIAL FEATURES WARNING AND SAFETY NOTES PROGRAM FLOW CHART OPERATION OPERATING PROGRAM CHARGING PROGRAM BATTERY MEMORY SET AND

More information

nano Professional Balance Charger / Discharger Instruction Manual [Version 1.20]

nano Professional Balance Charger / Discharger Instruction Manual [Version 1.20] nano Professional Balance Charger / Discharger Instruction Manual [Version 1.20] TABLE OF CONTENTS INTRODUCTION SPECIAL FEATURES WARNING AND SAFETY NOTES PROGRAM FLOW CHART OPERATION OPERATING PROGRAM

More information

Specifications. Special features

Specifications. Special features Thank you for purchasing the 6Cell Charger. You get a rapid charger/discharger with a built-in balance, which is computerized with a high performance microprocessor and specialized operating software.

More information

Manufactured by ProTek R/C

Manufactured by ProTek R/C Multi-Chemistry, High Output Dual Charger System With Dual 200Watt Outputs & Integrated Cell Balancers Manufactured by ProTek R/C All specifications and figures are subject to change without notice. Printed

More information

SMART BALANCE CHARGER INSTRUCTION MANUAL

SMART BALANCE CHARGER INSTRUCTION MANUAL C1 SMART BALANCE CHARGER INSTRUCTION MANUAL TABLE OF CONTENTS INTRODUCTION... 01 SPECIFICATION...03 MAIN FEATURES... 04 WARNING AND SAFETY NOTES...06 PROGRAM FLOW CHART...09 PROGRAM DESCRIPTION...10 OPERATING

More information

AC Balance Charger/Discharger INSTRUCTION MANUAL. Overlander Batteries 2016 Version 1.0

AC Balance Charger/Discharger INSTRUCTION MANUAL. Overlander Batteries 2016 Version 1.0 AC Balance Charger/Discharger INSTRUCTION MANUAL Overlander Batteries 2016 Version 1.0 TABLE OF CONTENTS INTRODUCTION SPECIAL FEATURES WARNING AND SAFETY NOTES PROGRAM FLOW CHART OPERATION OPERATING PROGRAM

More information

INTRODUCTION. Specifications INTRODUCTION

INTRODUCTION. Specifications INTRODUCTION INTRODUCTION INTRODUCTION Thank you for purchasing the C6 Intelligent Balance Charger by XCEED-RC. This product is a rapid charger with a high performance microprocessor and specialized operating software.

More information

Version 2 AC/DC Dual Power Professional Balance Charger/Discharger

Version 2 AC/DC Dual Power Professional Balance Charger/Discharger Version 2 AC/DC Dual Power Professional Balance Charger/Discharger SkyRC Technology Co., Ltd. 2016 Version 2.1 TABLE OF CONTENTS INTRODUCTION SPECIAL FEATURES WARNING AND SAFETY NOTES PROGRAM FLOW CHART

More information

INSTRUCTION MANUAL. Built-In AC Power Supply. Professional Balance Charger/Discharger. C SKYRC Technology Co., Ltd

INSTRUCTION MANUAL. Built-In AC Power Supply. Professional Balance Charger/Discharger. C SKYRC Technology Co., Ltd INSTRUCTION MANUAL Built-In AC Power Supply Professional Balance Charger/Discharger C SKYRC Technology Co., Ltd. 2011.06 www.skyrc.com U1B6M10111 Version 1.1 TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION

More information

INSTRUCTION MANUAL ECLIPS 2100 DUO AC/DC ECLIPS 2240 DUO AC/DC ECLIPS 2400 DUO AC/DC ECLIPS 4400 QUAD AC/DC

INSTRUCTION MANUAL ECLIPS 2100 DUO AC/DC ECLIPS 2240 DUO AC/DC ECLIPS 2400 DUO AC/DC ECLIPS 4400 QUAD AC/DC INSTRUCTION MANUAL ECLIPS 2100 DUO AC/DC ECLIPS 2240 DUO AC/DC ECLIPS 2400 DUO AC/DC ECLIPS 4400 QUAD AC/DC Warning & Safety Notes These warnings and safety notes are particularly important. Please follow

More information

Instruction Manual BALANCE CHARGER/DISCHARGER FOR NICD/NIMH/LITHIUM/PB BATTERIES

Instruction Manual BALANCE CHARGER/DISCHARGER FOR NICD/NIMH/LITHIUM/PB BATTERIES X6+ AC/DC CHARGER For Sales and support in the USA please contact: Neutronics 11421 West Bernardo Ct San Diego, California 92127 Phone: 858 674 2250 Web: www.neumotors.com E-mail: sales@neutronics.com

More information

BALANCE CHARGER/DISCHARGER FOR NICD/NIMH/LITHIUM/PB BATTERIES. Dual Input Power(AC/DC) Operating Manual

BALANCE CHARGER/DISCHARGER FOR NICD/NIMH/LITHIUM/PB BATTERIES. Dual Input Power(AC/DC) Operating Manual BALANCE CHARGER/DISCHARGER FOR NICD/NIMH/LITHIUM/PB BATTERIES Dual Input Power(AC/DC) Operating Manual Thank you for purchasing the balance charger. This is a rapid charger/discharger with built in balancer,

More information

Operating Instructions 680B. 8A 6CELLs 150W. 1 to 6 LiPo and LiFe batteries Balance charger. Chargery Power Co., Ltd.

Operating Instructions 680B. 8A 6CELLs 150W. 1 to 6 LiPo and LiFe batteries Balance charger. Chargery Power Co., Ltd. Operating Instructions 8A 6CELLs 150W 1 to 6 LiPo and LiFe batteries Balance charger Chargery Power Co., Ltd. Head Office Add: Room 20B, Haihui Building, Nanhai Avenue, NanShan, ShenZhen, China Zip code:

More information

BLACKMAX. BALANCE CHARGER/DISCHARGER FOR LiFe/LiPo/LiIon/NiCd/NiMH/PB BATTERIES. BLACKMAX Users Guide

BLACKMAX. BALANCE CHARGER/DISCHARGER FOR LiFe/LiPo/LiIon/NiCd/NiMH/PB BATTERIES. BLACKMAX Users Guide Booma-RC BLACKMAX BALANCE CHARGER/DISCHARGER FOR LiFe/LiPo/LiIon/NiCd/NiMH/PB BATTERIES Dual Charge MAXPACK READY Charge 2 Booma MAXPACK Batteries Simultaneously BLACKMAX Users Guide BLACKMAX is a rapid

More information

Operating Instructions CHARGERY C650. Microprocessor controlled high performance rapid charger for LiPo battery packs with cell balancer.

Operating Instructions CHARGERY C650. Microprocessor controlled high performance rapid charger for LiPo battery packs with cell balancer. Operating Instructions CHARGERY C650 Microprocessor controlled high performance rapid charger for LiPo battery packs with cell balancer. Charge current up to 8A, 100W, for 1-6 LiPo cells 8 Chargery Power

More information

INSTRUCTION MANUAL. Item-No. C Watt. ONE Output. Li-Po HV 2-4. Li-Fe 2-4. Li-Po 2-4. Ni-Cd 6-8. Ni-MH 6-8. Li-Ion 2-4 PB 2-12V.

INSTRUCTION MANUAL. Item-No. C Watt. ONE Output. Li-Po HV 2-4. Li-Fe 2-4. Li-Po 2-4. Ni-Cd 6-8. Ni-MH 6-8. Li-Ion 2-4 PB 2-12V. Item-No. C-48485 100-240V AC 60 Watt ONE Output Charge Current 6A Li-Po 2-4 Li-Po HV 2-4 Li-Fe 2-4 Li-Ion 2-4 Ni-Cd 6-8 Ni-MH 6-8 PB 2-12V Worldwide INSTRUCTION MANUAL TABLE OF CONTENTS INTRODUCTION...03

More information

NEVER CHARGE ON OR AROUND COMBUSTIBLE MATERIALS. NEVER CHARGE A DAMAGED BATTERY PACK.

NEVER CHARGE ON OR AROUND COMBUSTIBLE MATERIALS. NEVER CHARGE A DAMAGED BATTERY PACK. 2 Table of contents Introduction...3 Warnings and Safety Notes...4 Charger Layout...10 Specifications...11 Features...12 Power Supply Connections...15 Battery Connections...16 Operating the X1 Pro...17

More information

A IT IS HIGHLY RECOMMENDED THAT YOU UTILIZE A SAFETY DEVICE SUCH A IT IS HIGHLY RECOMMENDED THAT YOU KEEP AN OPERABLE CLASS A. Table of Contents:

A IT IS HIGHLY RECOMMENDED THAT YOU UTILIZE A SAFETY DEVICE SUCH A IT IS HIGHLY RECOMMENDED THAT YOU KEEP AN OPERABLE CLASS A. Table of Contents: INSTRUCTION MANUAL WARNING: THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW 1 THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL MAY RESULT IN PROPERTY DAMAGE AND/OR LOSS

More information

Introduction Charger Layout Special Features Warnings and Safety Information Default User Preferences Setup...

Introduction Charger Layout Special Features Warnings and Safety Information Default User Preferences Setup... TABLE OF CONTENTS Introduction................................01 Charger Layout............................03 Special Features.....................04 Warnings and Safety Information....................06

More information

WARNING: THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL MAY

WARNING: THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL MAY WARNING: THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL MAY RESULT IN PROPERTY DAMAGE AND/OR LOSS OF LIFE. Table of

More information

Overlander RC-8S PRO User s Manual

Overlander RC-8S PRO User s Manual Overlander RC-8S PRO User s Manual A Digital Programmable Balancing Charger/Discharger/Cycler. http://www.overlander.com 1 Contents. Page No. Introduction. 2 Specification. 2 Special Features. 2 Charger

More information

AC/DC SMART BALANCE CHARGER INSTRUCTION MANUAL

AC/DC SMART BALANCE CHARGER INSTRUCTION MANUAL C1-XR AC/DC SMART BALANCE CHARGER INSTRUCTION MANUAL TABLE OF CONTENTS INTRODUCTION... 01 SPECIFICATION...03 MAIN FEATURES... 04 WARNING AND SAFETY NOTES...06 PROGRAM FLOW CHART...09 PROGRAM DESCRIPTION...10

More information

All specifications and figures are subject to change without notice.

All specifications and figures are subject to change without notice. All specifications and figures are subject to change without notice. Table of Contents Introduction... 02 Charger Layout... 04 Special Features... 05 Warnings and Safety Information... 07 Default User

More information

G.T POWER XDRIVE-607 BALANCE CHARGER/DISCHARGER FOR NICD/NIMH/LITHIUM/PB BATTERIES. Operating Manual

G.T POWER XDRIVE-607 BALANCE CHARGER/DISCHARGER FOR NICD/NIMH/LITHIUM/PB BATTERIES. Operating Manual G.T POWER XDRIVE-607 BALANCE CHARGER/DISCHARGER FOR NICD/NIMH/LITHIUM/PB BATTERIES 7 7 7 7 7 7 Operating Manual Thank you for purchasing the G.T POWER XDRIVE - 607. This is a rapid charger/discharger with

More information

Introduction Charger Layout Special Features Warnings and Safety Information Default User Preferences Setup...

Introduction Charger Layout Special Features Warnings and Safety Information Default User Preferences Setup... TABLE OF CONTENTS Introduction................................01 Charger Layout............................03 Special Features.....................04 Warnings and Safety Information....................06

More information

BALANCE CHARGER / DISCHARGER / POWER SUPPLY. Instruction Manual. [Version 1.1]

BALANCE CHARGER / DISCHARGER / POWER SUPPLY. Instruction Manual. [Version 1.1] BALANCE CHARGER / DISCHARGER / POWER SUPPLY Instruction Manual [Version 1.1] Table of Contents Introduction Special Features Warning and Safety Notes Program Flow Chart Operation Power and Battery Connection

More information

BALANCE CHARGER / DISCHARGER / POWER SUPPLY. Instruction Manual. [Version 1.0]

BALANCE CHARGER / DISCHARGER / POWER SUPPLY. Instruction Manual. [Version 1.0] BALANCE CHARGER / DISCHARGER / POWER SUPPLY Instruction Manual [Version 1.0] Table of Contents Introduction SetContains Special Features Warning and Safety Notes Program Flow Chart Operation Power and

More information

Ballistic Battery Management System: Professional Intelligent Digital Balance Charger Instruction Sheet

Ballistic Battery Management System: Professional Intelligent Digital Balance Charger Instruction Sheet Ballistic Battery Management System: Professional Intelligent Digital Balance Charger Instruction Sheet Charging Specifications: Operating voltage range: DC11.0~18.0 Volt AC to DC adaptor (DC11.0~18.0V/5S)

More information

e -STATION Operating Manual BC8

e -STATION Operating Manual BC8 Operating Manual e STATION BC8 Microprocessor controlled highperformance rapid charger/discharger/ balancer for NiCd/NiMH/Lithium/Pb batteries with cell voltage balancer. USB PC link, temperature sensor

More information

WARNING: THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW

WARNING: THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW INSTRUCTION MANUAL AC/DC INPUT, PROFESSIONAL BALANCE CHARGER / DISCHARGER MULTICHARGER : THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW 1 THE INSTRUCTIONS AND S

More information

Table of Contents. Table of Contents:

Table of Contents. Table of Contents: OPERATION MANUAL WARNING: THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL MAY RESULT IN PROPERTY DAMAGE AND/OR LOSS OF

More information

2 x 50W DUAL OUTPUT PROFESSIONAL BALANCE CHARGER/DISCHARGER AC DC

2 x 50W DUAL OUTPUT PROFESSIONAL BALANCE CHARGER/DISCHARGER AC DC 2 x 50W DUAL OUTPUT PROFESSIONAL BALANCE CHARGER/DISCHARGER AC DC For more information, please visit www.radientrc.com or scan the QR code with your smart phone. Part Numbers RDNA0396 Duplex 2 x 50W LCD

More information

MULTICHARGER INSTRUCTION MANUAL AC/DC INPUT, PROFESSIONAL BALANCE CHARGER DISCHARGER

MULTICHARGER INSTRUCTION MANUAL AC/DC INPUT, PROFESSIONAL BALANCE CHARGER DISCHARGER INSTRUCTION MANUAL AC/DC INPUT, PROFESSIONAL BALANCE CHARGER DISCHARGER MULTICHARGER : THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW 1 THE INSTRUCTIONS AND S IN

More information

Operating Instructions CHARGERY 680B

Operating Instructions CHARGERY 680B Operating Instructions CHARGERY 680B Synchronous Rectification and microprocessor controlled high performance rapid Charger/Balancer for LiPo, LiFe battery packs with cell balancer. Charge current up to

More information

THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW THESE EXPLICIT WARNINGS CAN

THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW THESE EXPLICIT WARNINGS CAN INSTRUCTION MANUAL WARNING: THE CHARGING AND DISCHARGING OF RC HOBBY BATTERIES CAN BE DANGEROUS. FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL MAY RESULT IN PROPERTY DAMAGE AND/OR LOSS

More information

Operating Instructions e -STATION

Operating Instructions e -STATION Operating Instructions e -STATION BC8DX Two identical and independent outputs with integrated balancer Charge current up to 9A, discharge current up to 5A, 1 to 8 series of LiIo/LiPo/LiFe, 1 to 22 cells

More information

Operating Instructions

Operating Instructions Operating Instructions BC6DC Microprocessor controlled highperformance rapid charger/discharger with integrated balancer USB PC link and temperature sensor Charge current up to 5A, discharge current up

More information

VLE8 USER MANUAL 4 HANDLEIDING 18 MODE D'EMPLOI 33 MANUAL DEL USUARIO 48 BEDIENUNGSANLEITUNG 63 INSTRUKCJA OBSŁUGI 78 MANUAL DO UTILIZADOR 93

VLE8 USER MANUAL 4 HANDLEIDING 18 MODE D'EMPLOI 33 MANUAL DEL USUARIO 48 BEDIENUNGSANLEITUNG 63 INSTRUKCJA OBSŁUGI 78 MANUAL DO UTILIZADOR 93 LI-ION/POLYMER BALANCE CHARGER LI-ION/LIPO-BALANSLADER CHARGEUR ÉQUILIBREUR POUR ACCUS LI-ION/LIPO CARGADOR BALANCEADOR PARA BATERÍAS LI-ION/LIPO LADEGERÄT MIT BALANCER FÜR LI-ION-/LIPO-AKKUS ŁADOWARKA

More information

HYPERION EOS 5i. User s Manual. Power, with Ease

HYPERION EOS 5i. User s Manual. Power, with Ease HYPERION EOS 5i User s Manual Power, with Ease HYPERION EOS 5i - User s Manual Please read the following instructions carefully, to insure safety and convenience EOS 5i Special Features *Powerful, yet

More information

Operating Instructions e -STATION

Operating Instructions e -STATION Operating Instructions e -STATION BC8DP Microprocessor controlled high-performance rapid charger/discharger for NiCd/NiMH/Lithium/Pb batteries. Dual input power(ac/dc), USB PC link, temperature sensor

More information

BC6 'Dual power' Operating Manual

BC6 'Dual power' Operating Manual Operating Manual estation BC6 'Dual power' Microprocessor controlled highperformance rapid charger/discharger for NiCd/NiMH/Lithium/Pb batteries with an integrated cell voltage balancer. Dual input power(ac/dc),

More information

INDEX PRODUCT CONTAINS

INDEX PRODUCT CONTAINS FOREWORD INDEX FOREWORD p PRODUCT CONTAINS p OPTIONAL ACCESSORIES p3 SPECIFICATION p3 FEATURES p WARNING and NOTES p BATTERIES and MAX CURRENT p6- p8 /DIS LIPO BATTERY p9- /DIS LIFE BATTERY p3-6 /DIS LIIO

More information

Intelligent Pulse Charger/Discharger KP-100W6 USER S MANUAL

Intelligent Pulse Charger/Discharger KP-100W6 USER S MANUAL Intelligent Pulse Charger/Discharger KP-100W6 USER S MANUAL 1. Features... 1 2. Specifications... 1 3. Unit Exterior & Accessories... 2 4. Operation Intro.. 3 5. Lithium battery balance charging information...

More information

Emperor L712B Pro. OpErAting instructions

Emperor L712B Pro. OpErAting instructions Emperor L712B Pro Thank you for purchasing this Fusion Emperor L712B Pro charger. We are sure you will be pleased with its performance and features. In order to ensure that you obtain the maximum benefit

More information

nano Professional Balance Charger / Discharger Instruction Manual [Version 1.20]

nano Professional Balance Charger / Discharger Instruction Manual [Version 1.20] nano Professional Balance Charger / Discharger Instruction Manual [Version 1.20] TABLE OF CONTENTS INTRODUCTION SPECIAL FEATURES WARNING AND SAFETY NOTES OPERATING PROGRAM WARNING AND ERROR MESSAGE CONTROLLING

More information

INDEX PRODUCT CONTAINS

INDEX PRODUCT CONTAINS INDEX FOREWORD PRODUCT CONTAINS OPTIONAL ACCESSORIES SPECIFICATION FEATURES WARNING and NOTES ERIES and MAX CHARGE CURRENT SYSTEM SETTING CHARGE/ LIPO ERY CHARGE/ LIFE ERY CHARGE/ LIIO ERY CHARGE/ NIMH

More information

Operating Instructions

Operating Instructions Operating Instructions Introduction Thank you for purchasing the Power Peak D7 EQ-BID automatic battery charger from Hitec, a high-performance 400 W charging / discharging station for the demanding modeler.

More information

Super Brain 989 The Pinnacle of Performance with Power to Spare User s Manual Model Rectifier Corporation

Super Brain 989 The Pinnacle of Performance with Power to Spare User s Manual Model Rectifier Corporation Super Brain 989 The Pinnacle of Performance with Power to Spare User s Manual Temperature sensor jack Sensor included Model Rectifier Corporation Please read this entire manual including all Safety Cautions,

More information

Super Brain 992 Palm Charger

Super Brain 992 Palm Charger Super Brain 992 Palm Charger INSTRUCTION MANUAL Features and Specifications DC charger with separate AC power supply included (DC input of 12V to 18V) Large backlit LCD Adjustable charge rate from 0.2

More information

HYPERION EOS0606i-B USER S MANUAL Visit for the newest manuals and news

HYPERION EOS0606i-B USER S MANUAL Visit   for the newest manuals and news HYPERION EOS0606i-B USER S MANUAL Visit http://media.hyperion.hk/dn/eos for the newest manuals and news EOS 0606i Special Features (rev B ) *Powerful, yet compact and portable with wide support for battery

More information

Digital Charger & Discharger

Digital Charger & Discharger Digital Charger & Discharger INSTRUCTION MANUAL www.copterx.com Copyright 2008 KY MODEL Company Limited. MENU Table of content...........................................................................

More information

User's Manual. Intelligent Charger/Discharger X6-Plus

User's Manual. Intelligent Charger/Discharger X6-Plus Intelligent Charger/Discharger X6-Plus User's Manual 1 INDEX Specifications........2 System Features...... 2 Warnings... 2 X6-Plus charger layout....3 General Setup & Notes...... 4 Li-Po, Li-Ion, Li-Mn,

More information

Operating Instructions BPH 35W CHARGER

Operating Instructions BPH 35W CHARGER Operating Instructions BPH 35W CHARGER Microprocessor controlled high performance Charger / Discharger/ Balancer / Cell Monitor for LiPo & LiFe battery packs. Charge current up to 4.0A, 35W, for 2-4 LiPo

More information

C10325 v1.1. Thanks for your purchasing the intelligent and powerful charger.

C10325 v1.1. Thanks for your purchasing the intelligent and powerful charger. PFC programmable charger 90V~265VAC Input Thanks for your purchasing the intelligent and powerful charger. Read the ENTIRE instruction manual to become familiar with the features/functions of the device

More information

HYPERION HP-0610i-DUO Connections and Flow Charts

HYPERION HP-0610i-DUO Connections and Flow Charts HYPERION HP-0610i-DUO Connections and Flow Charts 1. DUO CHARGER LAYOUT DC INPUT CABLE 2X16 LCD PC DATA PORT TEMP1 SENSOR OUTPUT PORT 1 OUTPUT PORT 2 TEMP2 SENSOR CH Output 1 6Cell Lithium Balancer Connector

More information

80W. Operating Manual. Dual Power. Intelligent Balance Charger LiPo/LiFe/LiIon: NiMH/NiCd: Pb: Charge Power: Charge Rate: Discharge Rate:

80W. Operating Manual. Dual Power. Intelligent Balance Charger LiPo/LiFe/LiIon: NiMH/NiCd: Pb: Charge Power: Charge Rate: Discharge Rate: 80W Dual Power /LiFe/LiIon NiMH/NiCd Pb Charge Power Charge Rate Discharge Rate 1-6S 1-16S 2-20V 80W 0.1-10.0A 0.1-2.0A Intelligent Balance Charger Operating Manual - 2 - Please read this operating manual

More information

Computerized Charger, Discharger, Cycler INSTRUCTIONS

Computerized Charger, Discharger, Cycler INSTRUCTIONS Computerized Charger, Discharger, Cycler INSTRUCTIONS Based on the industry-leading original Triton charger from ElectriFly, Triton Jr. offers most of the key specifications and features, plus the same

More information

HYPERION EOS0610iNET Ports & Net Cable

HYPERION EOS0610iNET Ports & Net Cable HYPERION EOS0610iNET Ports & Net Cable CHARGER 1 (MASTER) CHARGER 2 (SLAVE) DC CABLE DC CABLE 2X16 LCD 2X16 LCD PC DATA PORT OUTPUT PORT PC DATA PORT OUTPUT PORT TEMP SENSOR TEMP SENSOR CHG to CHG Link

More information

Features: Enhanced throttle response, excellent acceleration, linearity and driveability

Features: Enhanced throttle response, excellent acceleration, linearity and driveability 120A/150A ESC X-Car 120A/150A Series Sensored/Sensorless Brushless ESC for 1:8 scale Car or Truck Thank you for purchasing the X-Car Brushless Electronic Speed Controller (ESC). The X-Car 1:8 Scale 120A/150A

More information

5006B 5008B 50010B for up to 10S LiPo & LiFe 5mV voltage accuracy 500W charge power 1.3A balance current 2.8 TFT LCD display

5006B 5008B 50010B for up to 10S LiPo & LiFe 5mV voltage accuracy 500W charge power 1.3A balance current 2.8 TFT LCD display 5006B 5008B 50010B for up to 10S LiPo & LiFe 5mV voltage accuracy 500W charge power 1.3A balance current 2.8 TFT LCD display Thanks for your purchasing the 500W CHARGER for your RC. Read the ENTIRE instruction

More information

AC/DC Dual Touch Charger Instruction Manual

AC/DC Dual Touch Charger Instruction Manual DTXP4261 AC/DC Dual Touch Charger Instruction Manual It is strongly recommended to completely read this manual before use! Damage resulting from misuse or modification will void your warranty. WARNING!!

More information

Model 1:8 Beast-ZTWSS120A 1:8 Beast-ZTWSS150A. PN#Model Cont.Current 120A 150A. Burst Current 760A 1080A

Model 1:8 Beast-ZTWSS120A 1:8 Beast-ZTWSS150A. PN#Model Cont.Current 120A 150A. Burst Current 760A 1080A Alien Power System BEAST Series Sensored/Sensorless Brushless ESC for 1:8 scale Car or Truck Thank you for purchasing the Alien Power System Brushless Electronic Speed Controller (ESC). The Alien Power

More information

Competition Electronics, Inc

Competition Electronics, Inc Competition Electronics, Inc Turbo35-GFX LiPo User s Manual Addendum 1 Introduction This enhancement makes it possible to charge 1,2 and 3 cell LiPo battery packs with the T35-GFX. Now you can have the

More information

BATTERY CHARGER RS-1000 Instruction Manual

BATTERY CHARGER RS-1000 Instruction Manual BATTERY CHARGER RS-1000 Instruction Manual BEFORE USING OUR BATTERY CHARGER RS1000, READ IN DETAILS ALL INSTRUCTIONS CONTAINED IN THIS MANUAL. KEEP THIS MANUAL IN A SAFE PLACE AS YOU MAY NEED TO USE IT

More information

Power Meter with Balancing INSTRUCTION MANUAL

Power Meter with Balancing INSTRUCTION MANUAL Power Meter with Balancing INSTRUCTION MANUAL INSTRUCTIONS The PowerMatch meter is a perfect device for matching electronic components to optimize electric fl ight performance and satisfaction. An easy-to-read

More information

OPERATING INSTRUCTION

OPERATING INSTRUCTION OPERATING INSTRUCTION Prior to use, please read this manual thoroughly. Keep this manual in a convenient place for quick and easy reference. Contents BEFORE USE SUPPROT AND SERVICE Customer support Internet

More information

Super Brain 977. AC/DC Charger with Dual Output and Discharge Function. User s Manual. Model Rectifier Corporation

Super Brain 977. AC/DC Charger with Dual Output and Discharge Function. User s Manual. Model Rectifier Corporation Super Brain 977 AC/DC Charger with Dual Output and Discharge Function User s Manual Model Rectifier Corporation 80 Newfield Avenue Edison, NJ 08837-3817 Phone: 732-225-6360 www.modelrectifier.com Please

More information

BREEZE PLUS LX40. OpErATInG InSTrUCTIOnS Please keep for future reference

BREEZE PLUS LX40. OpErATInG InSTrUCTIOnS Please keep for future reference BREEZE PLUS LX40 OpErATInG InSTrUCTIOnS Please keep for future reference Thank you for purchasing this Breeze Plus LX40 charger. We are sure you will be pleased with its performance and features. In order

More information

INSTRUCTIONS. N61e Quick Charger

INSTRUCTIONS. N61e Quick Charger INSTRUCTIONS N61e Quick Charger Software version V 1.0 and higher Microprocessor Controlled Quick charger, Discharger, Balancer For Li-Po Li-Ion, Li-FePO4(A123), Ni-Cd, Ni-MH, Lead-Acid Up to 10 Amp charge,

More information

Special Purpose for RC

Special Purpose for RC Special Purpose for RC Instruction Manual N61e Quick Charger Software Version V 1.0 and Higher Microprocessor Controlled Quick Charger, Discharger, Balancer For Li-Po Li-Ion, Li-FePO4(A123), NiCd, NiMH,

More information

User Manual IQ338. We thank you that you have decided to purchase our intelligent charger.

User Manual IQ338. We thank you that you have decided to purchase our intelligent charger. User Manual IQ338 Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. 9 120004 642783 Please follow the safety and care instructions

More information

Cirtix series Brushless Speed Controller manual For RS1/RS A/ Page - 1 -

Cirtix series Brushless Speed Controller manual For RS1/RS A/ Page - 1 - RS1/RS20602010A/100524 Page - 1 - Thank you for purchasing the Speed Passion Cirtix series electronic speed controller (ESC). High power systems for RC models can be very dangerous, so we strongly suggest

More information

5006B 5008B 50010B for up to 10S LiPo & LiFe 5mV voltage accuracy 500W charge power 1.3A balance current 2.8 TFT LCD display

5006B 5008B 50010B for up to 10S LiPo & LiFe 5mV voltage accuracy 500W charge power 1.3A balance current 2.8 TFT LCD display 5006B 5008B 50010B for up to 10S LiPo & LiFe 5mV voltage accuracy 500W charge power 1.3A balance current 2.8 TFT LCD display Thanks for your purchasing the 500W CHARGER for your RC. Read the ENTIRE instruction

More information

2 Channels AC/DC Charger

2 Channels AC/DC Charger No. S2004 English 2 Channels AC/DC Charger OPERATING INSTRUCTION Please read this manual thoroughly. Keep this manual in a convenient place for quick and easy reference. - CONTENTS - BEFORE USE SUPPORT

More information

ULTRAMAT AC/DC EQ OPERATING INSTRUCTION

ULTRAMAT AC/DC EQ OPERATING INSTRUCTION ULTRAMAT AC/DC EQ OPERATING INSTRUCTION Prior to use, please read this manual thoroughly. Keep this manual in a convenient place for quick and easy reference. Contents BEFORE USE SUPPROT AND SERVICE Customer

More information

C4012B for up to 12S LiPo & LiFe & LiTo 5mV voltage accuracy 1500W charge power at AC 500W charge power at DC 1.2A balance current 2.

C4012B for up to 12S LiPo & LiFe & LiTo 5mV voltage accuracy 1500W charge power at AC 500W charge power at DC 1.2A balance current 2. C4012B for up to 12S LiPo & LiFe & LiTo 5mV voltage accuracy 1500W charge power at AC 500W charge power at DC 1.2A balance current 2.8 TFT LCD display Thanks for your purchasing the 1500W CHARGER for your

More information

Super Brain 969 Pro AC/DC Delta Peak Charger with Dual Output and Discharge Function Instruction Manual Model Rectifier Corporation

Super Brain 969 Pro AC/DC Delta Peak Charger with Dual Output and Discharge Function Instruction Manual Model Rectifier Corporation Super Brain 969 Pro AC/DC Delta Peak Charger with Dual Output and Discharge Function Instruction Manual Model Rectifier Corporation Please read this entire manual, including all Safety Cautions and Warnings

More information

Copyright 2009 by Venom

Copyright 2009 by Venom Copyright 2009 by Venom TABLE OF CONTENTS Introduction...2 Parts List / Specifications...3-4 Program Select MAP...5-6-7 Program Select USER SET PROGRAMING...8 Program Select LiPO BATTERY...9-10 Program

More information

FEATURES Charges two 6- to 8-cell NiCd/NiMH battery packs simultaneously Fully automatic operation Multi-color LEDs indicate state of charge at a

FEATURES Charges two 6- to 8-cell NiCd/NiMH battery packs simultaneously Fully automatic operation Multi-color LEDs indicate state of charge at a FEATURES Charges two 6- to 8-cell NiCd/NiMH battery packs simultaneously Fully automatic operation Multi-color LEDs indicate state of charge at a glance 8-bit MHz CPU intelligence control Advanced Pulse

More information

Programmable Charger, Discharger and Analyzer for R/C Cars, Trucks & Boats INSTRUCTION MANUAL

Programmable Charger, Discharger and Analyzer for R/C Cars, Trucks & Boats INSTRUCTION MANUAL Programmable Charger, Discharger and Analyzer for R/C Cars, Trucks & Boats INSTRUCTION MANUAL IntelliPeak Ice is a high performance computerized battery charger, discharger, and cycler. IntelliPeak Ice

More information

User Manual. User Manual IQ 328+

User Manual. User Manual IQ 328+ User Manual IQ 328+ Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. Please follow the safety and care instructions in

More information

BATTERY CHARGER Instruction Manual

BATTERY CHARGER Instruction Manual BATTERY CHARGER Instruction Manual BEFORE USING OUR BATTERY CHARGER, READ IN DETAILS ALL INSTRUCTIONS CONTAINED IN THIS MANUAL. KEEP THIS MANUAL IN A SAFE PLACE AS YOU MAY NEED TO USE IT AT A LATER DATE.

More information

INSTRUCTIONS SPECIAL FEATURES

INSTRUCTIONS SPECIAL FEATURES INSTRUCTIONS Discharge Termination: auto-cut based on individual cell voltages 2.75V per cell in Quick-Balance Mode 3.0V per cell in Interface Mode with separate discharger Discharge Current: 120mA per

More information

Functions and Displays

Functions and Displays Functions and Displays No. 4125 (12V/220V only - Euro-Connector) No. 4127 (12V/220V only - GB-Connector) No. 4129 (12V/110V only US/Japan-Connector) Dear Customer, thank you for purchasing this LRP product.

More information

Begin to Use The New ESC: Before use the new ESC please carefully check every connections are correct or not. Yellow motor wire B Blue motor wire A

Begin to Use The New ESC: Before use the new ESC please carefully check every connections are correct or not. Yellow motor wire B Blue motor wire A HIMOTO ZTW Brushless Electronic Speed Control for car or truck Thank you for purchasing ZTW Brushless Electronic Speed Controller(ESC). The ZTW electronic speed control (ESC) is specifically designed for

More information