ELEKTRA SERIES I.T GRADE ONLINE DOUBLE CONVERSION UPS 10KVA ~ 500KVA (3/3) Mission Critical & I.T Grade UPS

Transcription

1 ELEKTRA SERIES I.T GRADE ONLINE DOUBLE CONVERSION UPS 10KVA ~ 500KVA (3/3) Mission Critical & I.T Grade UPS

2 Elektra Series (3/3, H.F) (10KVA~500KVA) Elektra Series I.T Grade On Line Double Conversion UPS represents the best solution that is both effective and environment friendly, it delivers and excellent integrated autonomy, reduced footprint and optimum input and output performances, guaranteeing reliable and flexible power. Elektra Double conversion pure on-line three phase input and output UPS adopt double conversion technology, able to provide solutions to conditions like voltage instantaneous drop-off or damping concussion, high-voltage plus, voltage pulsation, surge voltage, harmonic distortion, and frequency fluctuation, guarantees a safe and reliable power. UPS status can be monitored at a glance on an intuitive LCD screen. Elektra Series offer redundant and capacity parallel Ups, the right solution for all applications requiring a perfect and uninterrupted power supply. This is a green product that comply with the products pollution control management measures, the product under normal use, will not harm the environment and personals using it.

3 Active Input Correction (Pfc) With digital control of active power factor correction technology, enables high input power factor 0.99 above as to avoid contamination of electrical network environment, saving energy and reducing system costs. Compatible With Generators Input voltage and frequency range is wide so it can effectively works on generator and thus provide pure, safe and stable power. 0.9 ~ 1 The 0.9 & 1 Output reaffirms your original Deutsche Power Elektra Series purchase by fully leveraging your existing UPS investment to accommodate today s and tomorrow s high power factor load requirements. High-efficient, Energy Saving, Green Environmental Protection The efficiency of the machine is as high as 94% and reaches over 98% in the ECO mode which can help to reduce the power loss of the UPS s IGBT, FM, intelligent rectifier and inverter technology, input power factor 0.99, & input current harmonic wave (THDi) is as low as 3%. Excellent Overload Capacity When higher protection required, the optional dust-proof accessories can help to increase the protection level in harsh environment and safeguard the UPS s security. Elektra series UPS provide a broader range of input voltage from 210VAC to 475VAC, which ensures to be applicable in the unpleasant grid environment of different power supply equipment like generator, with its extraordinary input frequency. Zero Switching Transfer time when UPS transferred to the battery or vice versa is zero, effectively guarantee the load operation security and reliability. Application Elektra range provide a combination of outstanding protection features and flexibility, making it the right choice for applications demanding optimum reliability and energy efficiency. Systems such as servers, networking devices, workstations, storage systems and various IT equipment find the right protection element in Elektra Series, especially, when combined with Elektra Powerful Connectivity suite. VolP equipment, railway control systems, medical laboratory instrumentation, and many other industrial applications may also benefit from the consistent and high quality power provided by the Elektra, thanks to the robustness, precision and high efficiency provided. Key Features Advance IGBT Rectifier technology, input power factor: 0/99 Powerful Extensibility Features Smart slot provides rich scalable features, USB can be selected, AS400 card, SNMP card, RS485 card and environmental monitoring card. Standards Input THDi <3% The efficiency of the machines is as high as 94%. Connect parallel for maximum flexiblity and compatible to battery share in the parallel mode, which helps the customers to extend the system capacity with low cost. Intelligent management of battery charging and discharging. Lightning and surge protection, short circuit and overload protection. Safety: IEC/EN , IEC/EN EMC IEC/ EN , IEC , IEC , IEC , IEC , IEC , IEC Noise Suppression Complies with EN62040~2

4 MODEL RANGE INPUT Principal of working Phase Bypass OUTPUT / Regulation Crest Factor Efficiency BATTERY Charge Current (A) (It can be set according to battery capacity installed) Battery SYSTEM FEATURES Transfer time Overload: Line Mode Bat. Mode LCD Display Communication Interface ENVOIRMENTAL Oprating Temperature Stroage Temperature Humidity Range Altitude Noice Level PHYSICAL Dimension D x W x H (mm) Net Weight (kg) STANDRADS Safety Noise Suppression TECHNICAL SPECIFICATION FOR THREE PHASE IN & THREE PHASE OUT ESH KVA/9KW ESH KVA/13.5KW ESH KVA/18KW ESH KVA/27KW ESH KVA//36KW ESH KVA/54KW ESH KVA/72KW True On-line, Double Conversion, Static Bypass Switch Three phase + N + PE 208~478V > /70Hz 2% (100% non-linear load) Max.Volt.: 220V+25%(optional + 10%,+15%,+20%) 230V 20% (optional +10%, +15%) 240V 15% (optional +10%) Minimum volt.: -45% (optional -20%, _30%) Protection Range: ± 10% 380/400/415V (Adjustable), Three Phase + N + PE, ±2% Line Mode: ±1% / ±2%/ ± 4%/ ± 5%/ ± 10% of the rated frequency (optional) 2.Battery Mode: (50/60±0.2%)Hz 3:1 <2% with linear load <5% with non linear load 94.5% Standrad unit: ± 216Vdc; Long run unit Optional: ± 192V\ ± 240V\ ± 216V\± 228V\ ± 240V 5.7A (Max./standard unit) 6.0A (Max./Long run unit) Advance Battery Management 12A 18A Utility to battery: 0ms; Utility to bypass:0ms Load<110%:last 60min, <125%: Last 10min, < 150%: Last 5min,>150% shutdown UPS Immediately Load<110%:last 10min, <125%: Last 1min, < 150%: Last 5S,>150% shutdown UPS Immediately Input &, Output & Load Percentage, Battery & inner Temp. RS232, RS485,Parallel,Intelligent slot,relay Card (Optional, SNMP) Card (optional) S:591 H;123 S:594 H;126 S:595 H;127 0 ~ 40C -25~55C 0~95% (non condensing) <1500m <55db 780 x 600 x 1200 S:595 H; Safety: IEC/EN , IEC/EN EMC IEC/ EN , IEC , IEC , IEC , IEC , IEC , IEC Complies with EN62040~2 DP Electronics e.k(deutsche Power Co. Limited) has a policy of continuous product development and improvement and therefore reserve the right to vary any information without prior notes.

5 MODEL RANGE INPUT Principal of working Phase Bypass OUTPUT / Regulation Crest Factor Efficiency BATTERY Charge Current (A) (It can be set according to battery capacity installed) Battery SYSTEM FEATURES Transfer time Overload: Line Mode Bat. Mode LCD Display Communication Interface ENVOIRMENTAL Oprating Temperature Stroage Temperature Humidity Range Altitude Noice Level PHYSICAL Dimension D x W x H (mm) Net Weight (kg) STANDRADS Safety Noise Suppression TECHNICAL SPECIFICATION FOR THREE PHASE IN & THREE PHASE OUT ESH KVA 90KW/100KW ESH12033 ESH16033 ESH20033 ESH30033 ESH40033 ESH KVA 160KVA 200KVA 300KVA 400KVA 500KVA 108KW/120KW 144KW/160KW 180KW/200KW 270KW/300KW 360KW/400KW 450KW/500KW True On-line, Double Conversion, Static Bypass Switch Three phase + N + PE 208~478V >0.99~1 40/70Hz 2% (100% non-linear load) Max.: 220V+25%(optional + 10%,+15%,+20%) 230V 20% (optional +10%, +15%) 240V 15% (optional +10%) Minimum voltage: -45% (optional -20%, _30%) Protection Range: ± 10% 24A 380/400/415V (Adjustable), Three Phase + N + PE, ±1% 0.9/1(Customized) 1.Line Mode: ±1% / ±2%/ ± 4%/ ± 5%/ ± 10% of the rated frequency (optional) 2.Battery Mode: (50/60±0.2%)Hz 3:1 <2% with linear load <5% with non linear load 94.5% / 96% Customized Standrad unit: ± 216Vdc; Long run unit Optional: ± 192V\ ± 240V\ ± 216V\± 228V\ ± 240V 24A 36A 50A 80A Advance Battery Management Utility to battery: 0ms; Utility to bypass:0ms Load<110%:last 60min, <125%: Last 10min, < 150%: Last 5min,>150% shutdown UPS Immediately Load<110%:last 10min, <125%: Last 1min, < 150%: Last 5S,>150% shutdown UPS Immediately Input &, Output & Load Percentage, Battery & inner Temp. RS232, RS485,Parallel,Intelligent slot,relay Card (Optional, SNMP) Card (optional) 70db 0 ~ 40C -25~55C 0~95% (non condensing) <1500m 100A 73db 130A 780 x 600 x x600x x600x x 1200 x Safety: IEC/EN , IEC/EN EMC IEC/ EN , IEC , IEC , IEC , IEC , IEC , IEC Complies with EN62040~2 DP Electronics e.k(deutsche Power Co. Limited) has a policy of continuous product development and improvement and therefore reserve the right to vary any information without prior notes.

6 DP ELECTRONICS (DEUTSCHE POWER CO., LIMITED) Germany Head Office DP electronics e.k (Deutsche Power Co., Limited) Klon, Germany. Phone: Fax: Hong Kong Office RM 1701(057), 17/F, HeNan Building No90, Wan Chai, Hong Kong. Phone: Fax: