MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad
|
|
- Bethany Simon
- 5 years ago
- Views:
Transcription
1 MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad JNTUH REGISTRATION ID : NAME OF FACULTY: Dr. Ch. Kesava Reddy 3. DESIGNATION : Sr.Assistant Professor 4. YEARS OF EXPERIENCE : 17 Years 5. ID : kesavareddy@mgit.ac.in 6. UG DEGREE: B.E(Mechanical Engineering) 7. PG DEGREE: M.Tech (Thermal Engineering) 8. PH.D(AREA OF THE PH.D WORK): Internal Combustion Engines 9. SUBJECTS TAUGHT: Optimization Techniques, Non Conventional Energy sources, Engineering Drawing, Thermal Science, Fluid mechanics and Heat transfer, Automobile Engineering, Applied thermal Engineering-I, Applied thermal Engineering-II, Fluid mechanics and Hydraulic machinery 10. PAPER PUBLICATIONS IN INTERNATIONAL JOURNALS: May 2018, Experimental Investigation-Magnetic Assisted Electro Discharge Machining, IOP Con. Series, Material science and Engineering, ISSN: X,pp March 2018, Thermal Analysis of YZTP Coated Piston Crown,International Journal Of Creative Research Thoughts (IJCRT), e-issn: ,6(1),pp , UGC Journal(UGC ). 3. Feb 2018, Effect of low thermal conductivity materials on performance of Internal Combustion engine-a review and experimentation, International Organisation of Scientific Research(IOSR) Journal of Mechanical and Civil Engineering (IOSR- JMCE),e-ISSN: ,p-ISSN: X,15(1),pp87-94, Imapact Factor : Oct 2016, Effect of injection timing, pressure and preheating on exhaust emissions of ceramic coated diesel engine with Pongamia Biodiesel, International Journal of Current Engineering and Technology (IJCET), ISSN: ,6(5),pp , Imapact Factor : Sep 2016, Experimental Investigations on exhaust emissions of low heat rejection diesel engine with pongamia Biodiesel, International Journal of Application of Innovation in Engineering & Management (IJAIEM), ISSN: ,5(9),pp , Imapact Factor : Sep 2016, Experimental Investigations on Exhaust emissions of low heat rejection diesel engine with crude Mahua oil, International Journal of Thermal technologies, (IJTT), ISSN: ,6(3),pp ,Impact Factor:3.2
2 7. Sep 2016, Experimental Investigations on Performance parameters of semi adiabatic diesel engine with Mahua Bio diesel, International Journal of Application of Innovation in Engineering & Management (IJAIEM), ISSN: ,5(9),pp 32-44, Imapact Factor : Feb 2016, Studies on exhaust emissions and combustion characteristics of DI- Diesel engine with air gap insulation with varied injection timing and injector opening pressure, International Journal of Current Engineering and Technology (IJCET), E-ISSN ,6(1)pp: , Imapact Factor : Mar 2015, Effect of injection timing on performance parameters of Direct injection Diesel Engine with Air gap insulation, International Journal of Thermal technologies, (IJTT), ISSN: ,6(3),pp 9-17,IF: Feb 2015, Influence of Injector opening pressure on performance parameters of DI Diesel engine with three levels of insulation with Diesel operation, International Journal of Current Engineering and Technology (IJCET), E-ISSN ,5(1),pp 53-60, Imapact Factor : Feb 2015, Effect of injection timing on exhaust emissions and combustion charecterestics of Direct Injection Diesel engine with ceramic coated cylinder head, International Journal of Current Engineering and Technology (IJCET), E- ISSN ,5(1),pp 46-52, Imapact Factor : Dec 2014, Effect of injection timing on exhaust emissions and combustion characteristics of Direct injection Diesel engine with high grade insulated combustion chamber, International Journal of Application of Innovation in Engineering & Management (IJIAEM), ISSN: , Vol 3, Issue 12, PP , Imapact Factor : Dec 2014, Effect of injection timing on performance parameters of direct diesel engine with ceramic coated cylinder head, International Journal of Scientific Engineering Research(IJSER), ISSN: , Vol5, Issue12, PP , Thomson Reuters, Index Copernicus. 14. Dec 2014, Experimental Investigations on DI Diesel engine with different Combustion chambers Insulation, British Journal of Applied Science & Technology (BJAST), ISSN: , 6(3),PP , Science Domain,Thomson Reuters,copernicus index. 15. May 2014, Effect of sorret and magnetic field on unsteady flow of a radiating and chemical reacting fluid, International academy of science, Engineering and Technology,(IASET-IJME),ISSN: , 3(3),pp 1-11, Impact Factor:4.9395,Copernicus index, Thomson Reuters. 16. Dec 2013, ComparativePerformance of a crude pongamia oil in a low heat rejection Diesel engine, International Organisation of Scientific Research(IOSR) Journal of Mechanical and Civil Engineering (IOSR-JMCE),e-ISSN: ,p- ISSN: X,10(3),44-55, Imapact Factor : June 2013, Performance, Exhaust Emissions and Combustion Characteristics of Mohr oil based Bio-diesel in a Medium Grade Low Heat Rejection Diesel Engine, International Journal of Automotive Engineers and Technologies (IJAET),ISSN: , 2(2),pp 70-84, Copernicus index,, Imapact Factor : 2.0.
3 18. May 2013, Performance, Exhaust Emissions and Combustion Characteristics of Mohr oil based Bio-diesel in a Medium Grade Low Heat Rejection Diesel Engine International Journal of Science,Engineering and Technology Research, (IJSETR),ISSN: , 2(5),PP , Copernicus index. 19. Apr 2013, Performance, Exhaust Emissions and Combustion Characteristics of Mohr oil in crude form and Bio-diesel form in a Medium Grade Low Heat Rejection Diesel Engine, International Journal of Engineering Research and Development(IJERD), (IJSETR),ISSN: X, 6(8),pp 58-70, UGC Approved Journal (UGC-4739),Copernicus index. 20. Apr 2013, Studies on performance of ceramic coated diesel engine with Fueled With crude Mohr oil, TI Journals-International Journal of Engineering Sciences, (IJES),ISSN: , 2(4),PP Feb 2013, Comparative performance of ceramic coated diesel engine with mohr oil in crude and biodiesel form, International Journal of Engineering and Advanced Technology, (CSIR), ISSN: , 2(3), PP (Impact factor=1.0). 22. Nov 2012, Performance evaluation of mohr oil based biodiesel in low grade low heat rejection diesel engine, International Journal of Innovative Research in Science, Engineering and Technology, (IJIRSET), ISSN: , 1(1), PP 80-94, (Impact factor=7.08). 23. June 2012, Performance evaluation of a low heat rejection diesel engine with mohr oil based biodiesel, British Journal of Applied Science & Technology, ISSN: , 2(2), PP , Science Domain,Thomson Reuters,copernicus index. 24. June 2012, A comparative study of the performance evaluation of a low heat rejection engine with three different levels of insulation with crude pongamia oil operation, Canadian Journal on Mechanical Sciences & Engineering, 3(3), pp May 2012, Performance evaluation of a medium grade low heat rejection diesel engine with mohr oil based Bio diesel, International Journal of Recent Advances in Mechanical Engineering (IJMECH),(Australia),ISSN: ,1(1),PP Apr 2012, Control of oxides of nitrogen emissions from high grade low heat rejection diesel engine with crude pongamia oil by catalytic reduction, International Journal of Advanced Scientific Engineering & Technological Research (IJASETR),(Australia),ISSN: , 1(2),Article No-2, April, PP 10-25, Impact factor= Sep 2012, Performance evaluation of a high grade low heat rejection diesel engine with crude pongamia oil, International Journal of Engineering Research and Applications (IJERA), ISSN: , 2(5), PP , UGC Approved Journal (UGC-4525),Copernicus index. 28. Sep 2012, Comparative performance of different versions of the low heat rejection diesel engine with mohr oil based bio-diesel, International Journal of Research & Reviews in Applied Sciences (IJRRAS), ISSN: X, 1(1), PP
4 29. Jan 2012, Performance evaluation of a low grade low heat rejection diesel engine with crude pongamia oil, International Scholarly Research Network (ISRN) Renewable Energy (USA), ISSN: , Article ID pp 1-10.(Impact factor=2.0). 30. Dec 2011, Potential of a low heat rejection diesel engine with crude pongamia oil, International Journal of modern Engineering Research(IJMER),ISSN: ,Vol 1, Issue 1, PP , ISO:3297:2007,copernicus index,impact Factor: PAPER PUBLICATIONS IN INTERNATIONAL CONFERENCES : Nov 2017, Experimental Investigation-Magnetic Assisted Electro Discharge Machining, International Conference on Recent advances in Materials and Manufacturing Technology, at BITS Pilani, Dubai Campus, Dubai,UAE,28 th to 29 th Nov Oct 2016, Effect of injection timing,pressure and Preheating on Exhaust emissions of Diesel engine with air gap insulated combustion chamber with Pongamia biodiesel, Recent Trends In Engineering, Science and Technology (ICRTPNFE- 2016)),Elsevier Energy Procedia Proceedings pp ,Department of Mechanical Engineering,St.Peter s engineering college, IFHE, Hyderabad.25 th to 27 th October, Hyderabad. 3. Sep 2016, Experimental Investigations on performance parameters of semi adiabatic Diesel engine with crude Mahua oil, Recent Trends In Engineering, Science and Technology (ICRTPNFE-2016)),Elsevier Energy Procedia Proceedings pp ,Department of Mechanical Engineering,St.Peter s engineering college, IFHE, Hyderabad.25 th to 27 th October, Hyderabad. 4. Sep 2016, Performance and emission evaluation of a crude pongamia oil in a low heat rejection Diesel engine, Emerging Trends In Mechanical Engineering (ICTiME 2016),23 to 24 th September2016, Proceedings of International conference, pp ,Department of Mechanical Engineering of Faculty of Science and Technology, IFHE, Hyderabad. 5. Sep 2016, Android controller based Automatic oil dispensing, Emerging Trends In Mechanical Engineering (ICTiME 2016),23 to 24 th September2016, Proceedings of International conference, pp ,Department of Mechanical Engineering of Faculty of Science and Technology, IFHE, Hyderabad 12. PAPER PUBLICATIONS IN NATIONAL CONFERENCES : Feb 2018, Investigation of Di-DieselEngine with LHR Combustion chambers with alternative fuels, Recent Trends in Mechanical Engineering(NCRTME-18),Feb 26-27,2018 at JNTUH College of Engineering(Autonomous),Hyderabad Dec 2014, CFD Analysis on Heat transfer and Pressure drop characteristics of a corrugated louvered fin and flat tube compact heat exchanger, National conference on Relevance of English, Mathematics and management Sciences to Technical courses (REMMT-2014), Mahatma Gandhi Institute of Technology Hyderabad.
5 3. Dec 2014, Design of connecting rod of internal combustion engine: optimization approach, Mathematical modelling in science and Engineering, Department of Mathematics & Humanities, MGIT, Hyderabad. 13. BOOKS PUBLISHED: 06 Published a text book of Thermal Engineering - I, Sure publications, Hyderabad, 2004 Published a text book of Thermal Engineering - II, sure publications, Hyderabad, 2004 Revised Edition of Thermal Engineering II, Sure publications-2006 Published a Text book of 4-Stroke Compression ignition Engine noise using different blends of Pongamiaoil, Lambert Academic Publishing,Germany,U.K, ISBN: ,Jan Published a Text book of Design and Analysis of Axial Flow Fans, Lambert Academic Publishing, Germany,U.K, ISBN: , April 2018 Published a Text book of Design Analysis and Fabrication of Piston on CNC Machine, SIA omni Scriptum Publishing (Scholars Press), Lativa, European Union, ISBN: ,,April Published a Text book of Structural and Thermal Analysis of Silver coated Piston crown, SIA omni Scriptum Publishing (Scholars Press), Lativa, European Union, ISBN: , May CONTRIBUTIONS AT THE DEPARTMENTAL LEVEL: Thermal Engineering and Heat Transfer lab inchrage, Time Table in-charge 15. CONTRIBUTIONS AT THE COLLEGE LEVEL: Convener for various committees. 16. REFRESHER COURSES/ WORKSHOPS/CONFERENCES ATTENDED: 1. An Intensive course on Environmental studies organized by Srinidhi Institute of Technology, Hyderabad, 31 st November th December A Short term training programme on Robotics & Automation System organized by Mahatma Gandhi Institute of Technology, Hyderabad, 2 nd 7 th June A National Workshop on Surface modifications and its applications in industry organized by MJ Engineering College, Hyderabad, 18 th 20 th December International Conference on Applications on IC Engines organized by JNTU, Hyderabad during Dec One week Short term training programme on Mechatronics organized by Institute of Engineers (India), during June 16-20th 2008, Hyderabad. 6. Attended a One week workshop on STTP on Mechatronics at M.G.I.T, Gandipet, Hyd during 12th 16th July Attended One week Faculty Development Programme on Alternate Energy Options for I.C. Engines organized by National Institute of Technology, Calicut
6 sponsored by Ministry of HRD during 28 June 03 July, Attended Two week ISTE Workshop on Thermodynamics in Mechanical Engineering conducted by IIT, Bombay from June, Attended a One day Seminar on Innovation and Technology for Sustainable development (Sponcered by IIPC-AISTE,New Delhi) Organised by Department of Physics and Chemistry held at MGIT,Hyderabad during 12 th April Attended AICTE Sponsored Two week FDP Recent advances in Manufacturing automation and Simulation conducted by Dept. of Mechanical Engg, CBIT from May Attended Powder metallurgy association of India and Department of metallurgy,mgit Sponsored One week Short term course on Powder Metallurgy conducted by Dept. of Mechanical Engg, MGIT from DEC 18 to 22, Attended a One day International Conference on Advanced trends in IC engines and Combustion workshop at JNTUH, Kukatpally, Hyderabad during 28 Feb One week Short term training programme on Mechatronics organized by ISTE- SRM STTP, (ISTE,New Delhi and SRM University,Chennai), at MGIT,Hyderabad, during May 5 th -10 th 2014, Hyderabad. 14. Attended Faculty development Programme on Project Management from an Industry Perspective held on 8 th march 2014 at M.G.I.T,Hyderabad. 15. Worked as Co-convener for IGNITO 15, Department of Mechanical Engineering (Mechatronics) MGIT,Hyderabad 16. Attended one week Faculty development Programme on Finete Element Applications in Mechanical and Civil Engineering (Sponsored by Tequip-II) at CBIT, Hyderabad, during January 23-28, Attended National workshop on Alternative Liquid Fuels in IC Engines (ALFICE-17) organized by Department of Mechanical Engineering (Sponsored by Tequip-II) at CBIT, Hyderabad, during February 17-18, Attended Two weeks Faculty development Programme on Current trends in materials and manufacturing (Organized by CMR group of Institutions) at Department of Mechanical Engineering, CMR College of Engineering and Technology, Medchal, Hyderabad, during May 15-27, Attended Two weeks Faculty development Programme on Recent Advances in Design and Development of Mechatronics & Robotic Ststems at Department of Mechanical Engineering, Mahatma Gandhi Institute of Technology, Gandipet, Hyderabad, during Dec 4 th to16 th, Attended one week Faculty development Programme on Computational Fluid Dynamics & its Applications in Mechanical Engineering (Sponsored by Tequip-III) at JNTUH, Hyderabad, during April 23-27, MEMBERSHIP OF PROFESSIONAL BODIES : 05 Life Member - Indian Society for Technical Education - LM31795 Life Member Indian society of theoretical and applied mechanics - LM 808 Life Member Indian society for Heat and Mass transfer - LM-834
7 Life Member - International Association of Engineers, Hong Kong-LM Life Member The Combustion Institute Indian Section (CI-IS) LM 1233
FACULTY PROFILE. Degree Branch / Specialization College University
FACULTY PROFILE Name Designation Email ID : S.Benjamin Franklin : Assistant Professor (Sr.Gr) : benjaminfranklin.me@srit.com Area of Specialization Total Experience : Thermal Engineering : Academic : 7
More informationSRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING
SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING Name & Photo Dr. B. RAJENDRA PRASATH Designation Professor & Head Qualification UG(Specialization) Mechanical Engineering PG(Specialization)
More informationFaculty Vitae. Education Degree Discipline Institution Year UG BE Mechnical Madras university 1997
Faculty Vitae Name of the Faculty Dr.R.VENKATESH BABU Education Degree Discipline Institution Year UG BE Mechnical Madras university 1997 PG ME CAD Madras University 2001 PhD Ph.D IC Engines Bharath Institute
More informationFACULTY PROFILE. School/Collage. JNTU College of Engineering, Kakinada. National Institute of Technology, Warangal.
FACULTY PROFILE Name of the faculty: D. SRINIVASA RAO Department: ELECTRICAL & ELECTRONICS ENGINEERING : GUDLAVALLERU ENGINEERING COLLEGE: GUDLAVALLERU Phone No: 08674-273737 (O) Mobile: 9866981707 E-Mail:
More informationB.Tech. Final Year (Mechanical) Projects Supervised: 1. Development of Transient Droplet Combustion Model. (1995).
Annexure-I Theory Courses Taught (UG Level): 1. Basic Thermal Science (B.Tech 1st Year). 2. Applied Thermodynamics (B.Tech II Year Mechanical). 3. Energy Conversion Systems (Pre final Year). 4. Power Plant
More informationVISHNU SANKAR M.Tech (Ph.D Scholar at CUSAT), Thermal Engineering Mobile: ,
M.Tech (Ph.D Scholar at CUSAT), Thermal Engineering Mobile: 9567683959, 9497509992. Email: vishnusankar9369@gmail.com PERSONAL DETAILS Nationality : Indian Date of Birth : 03-10-1990 Sex : Male Marital
More informationEducational qualification:
hoto S.RAJKUMAR Designation: Assistant Professor (SG) Manakula Vinayagar Institute of Technology, Madagadipet, Puducherry, Pin code 605 107. E mail: rajkumareee@mvit.edu.in Phone: 0413-2680020 Mobile:
More informationPune University First
All India Shivaji Memorable Society s COLLEGE OF ENGINEERING, RESUME 1. Name of the teaching Staff: - Choudhari Chandrakishor Shrirang 2. Designation: - ASSISTANT PROFESSOR 3. Department: Mechanical Engineering
More informationPROF. V.R.Patil. Assistant Professor CONTACT
PROF. V.R.Patil Assistant Professor CONTACT E-mail:vrpatil@aissmscoe.com Phone: + 7720073869 Office: 91 (20)26058587, Research Interests Courses Taught Qualifications 1. Basic Mechanical Engineering 2.
More informationK.S.R. COLLEGE OF ENGINEERING, TIRUCHENGODE
K.S.R. COLLEGE OF ENGINEERING, TIRUCHENGODE 637 215. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING FACULTY PROFILE 01. Name :Dr.R.SANKARGANESH 02. Designation :Assistant Professor (Sr.) 03. Date
More informationIJENS-RPG [IJENS Researchers Promotion Group]
Full Name Major Areas of Interest : Dr.S.Sankar : FACTS, Electrical Machines, Voltage Stability, power quality, Power system security,power System Analysis, Induction generator, renewable power generation,
More informationEXPERIMENTAL INVETIGATIONN ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DI- CI ENGINE FUELED WITH PREHEATED SHEA OLEIN BIODIESEL
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 2006 2014, Article ID: IJMET_09_11 211 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtype=
More informationB.Shanker. 35 Years. S.No Degree University Year of passing 1 M.Tech. N.I.T.W 2007 Power Systems Engineering 2
Profile of Mr. B.SHANKER Name: B.Shanker Age: Permanent Address: 35 Years Islampet Opposite: L.E.F Church Bapatla-522101 Mail:shanker.bhanath@becbapatla.ac.in Educational Qualifications: S.No Degree University
More informationA STUDY ON DIESEL ENGINE PERFORMANCE DEPENDS ON BP AND BSFC BY APPLYING DIFFERENT INJECTION PRESSURE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 599 603, Article ID: IJMET_09_11_059 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=11
More informationCurriculum Vitae Dr. HAFIZUR RAHMAN Phone (Residence): ; Mobile:
Curriculum Vitae Dr. HAFIZUR RAHMAN Phone (Residence): +91 571 2504970; Mobile: +91 9997549589 Email: hifz.rahman@gmail.com; SUMMARY OF SKILLS AND EXPERIENCE B.Sc. Engineering (Electrical), M.Sc. Engineering
More informationChandra Prasad B S, Sunil S and Suresha V Asst. Professor, Dept of Mechanical Engineering, SVCE, Bengaluru
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 7, July 2018, pp. 997 1004, Article ID: IJMET_09_07_106 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=7
More informationEXPERIMENTAL INVESTIGATION OF THE EFFECT OF BTE AND NOX IN A DIRECT INJECTION VCR DIESEL ENGINE RUNNING WITH RICE BRAN METHYL ESTER
EXPERIMENTA INVESTIGATION OF THE EFFECT OF BTE AND NOX IN A DIRECT INJECTION VCR ENGINE RUNNING WITH RICE BRAN METHY ESTER Mr.V.Nageswara Reddy 1, Dr.G.Sreenivasa Rao 2. vnredd7@gmail.com 1, R.G.M. College
More informationGeneration of Air Swirl through Inlet Poppet Valve Modification and To Enhance Performance on Diesel Engine
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 12, Issue 6 Ver. VI (Nov. - Dec. 2015), PP 55-65 www.iosrjournals.org Generation of Air Swirl through
More informationCURRICULUM VITAE. Dr. PRAVEEN R.P. Professional Objective:
CURRICULUM VITAE Dr. PRAVEEN R.P Professional Objective: To prove myself as a dedicated and energetic employee in a progressive organization that gives me scope to apply my knowledge and skills and be
More informationFACULTY PROFILE. Date of Birth : No 9-A Block, Tamil Nadu Housing Board, Maharajapuram, Villupuram Educational Qualification:
Phone No : 04146 224500. 9942005782 FACULTY PROFILE Dr.V.Gnanamoorthi Assistant Pressor & HOD i/c Mechanical College engineering Kakuppam -605103 Email ID : cvgnana@gmail.com cvgnana@aucev.edu.in Date
More informationResume. Name of Institute S. S. G. B. H. H. School Bhusawal S. S. G. B. Polytechnic Bhusawal C. O. E. Badnera V. R. C. E. Nagpur. P. C. E.
Resume 1. Name of the Applicant- Manish Sheshrao 2. Date of Birth 13/07/1972 3. Marital Status- Married 4. Address- M. S., D-805, ORVI Apartments, Behind MITCON Institute Balewadi Pune-411045 (M. S.) India,
More informationMECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE
More informationFACULTY PROFILE SAKKER SATH, UDASI BADA AMARAVATI
FACULTY PROFILE NAME : DEVDAS BHIKULAL LATA DATE OF BIRTH : 16.06.1963 PERMANENT ADDRESS : Dr. D.B. LATA SAKKER SATH, UDASI BADA AMARAVATI 444 601 ADDRESS FOR : Dr. D. B. LATA CORRESPONDANCE Behind sai
More informationPrediction of Performance and Emission of Palm oil Biodiesel in Diesel Engine
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN: 2278-1684, PP: 16-20 www.iosrjournals.org Prediction of Performance and Emission of Palm oil Biodiesel in Diesel Engine Sumedh Ingle 1,Vilas
More informationElectrical Engineering
Electrical Engineering FACULTY PROFILE Year (2018-19) 1. Name: Mr. Naik Yogesh R. 2. Designation: Assistant Professor 3. Qualification: M.Tech [Power Systems] 4. Area of Specialization: Power Systems 5.
More informationSUMMARY OF SKILLS AND EXPERIENCE
Curriculum Vitae Dr. HAFIZUR RAHMAN Professor, Electrical Engineering Department, AMU, Aligarh-202002, India Phone (Residence): +91 571 2504970; Mobile: +91 9997549589 Email: hifz.rahman@gmail.com; SUMMARY
More informationCURRICULUM VITAE. S.No. Degree Discipline College/University Year of Percentage/ passing CGPA/GGPA th All subjects MP Board Bhopal
CURRICULUM VITAE Dr. Naresh Kumar Raghuwanshi Assistant Professor Mechanical Engineering Department Government Engineering College Banswara, Rajasthan, India Email: raghuwanshink@gmail.com Contact No.:
More informationRESUME. : Raghuram. L. Naik. Institute/ University/ Board. Visvesvaraya Technological University. Belagavi
RESUME PERSONAL: Name : Raghuram. L. Naik Date of Birth : 01 July 1974 Branch of Study Qualification : Electrical & Electronics Engineering : PhD Present Occupation Experience Permanent Address Marital
More informationREDUCTION OF EMISSIONS BY ENHANCING AIR SWIRL IN A DIESEL ENGINE WITH GROOVED CYLINDER HEAD
REDUCTION OF EMISSIONS BY ENHANCING AIR SWIRL IN A DIESEL ENGINE WITH GROOVED CYLINDER HEAD Dr.S.L.V. Prasad 1, Prof.V.Pandurangadu 2, Dr.P.Manoj Kumar 3, Dr G. Naga Malleshwara Rao 4 Dept.of Mechanical
More informationPERFORMANCE EVALUATION AND EMISSION CHARACTERISTICS OF LOW HEAT REJECTION ENGINE USING AIR GAP INSULATION
PERFORMANCE EVALUATION AND EMISSION CHARACTERISTICS OF LOW HEAT REJECTION ENGINE USING AIR GAP INSULATION M. IRSHAD AHMED #1, C. THAMODHARAN #2, P. RAMAN #3 #1 Dept. of Automobile Engg., BIST, Bharath
More informationPERFORMANCE OF DIRECT INJECTION C.I. ENGINE USING KARANJA OIL AT DIFFERENT INJECTION PRESSURES
IJRET: International Journal of Research in Engineering and Technology eissn: 239-63 pissn: 232-738 PERFORMANCE OF DIRECT INJECTION C.I. ENGINE USING KARANJA OIL AT DIFFERENT INJECTION PRESSURES A.G. Matani,
More information4. With a neat sketch explain in detail about the different types of fuel injection system used in SI engines. (May 2016)
SYED AMMAL ENGINEERING COLLEGE (Approved by the AICTE, New Delhi, Govt. of Tamilnadu and Affiliated to Anna University, Chennai) Established in 1998 - An ISO 9001:2000 Certified Institution Dr. E.M.Abdullah
More informationCEO PROGRAM September 2018
CEO PROGRAM September 2018 1 Sept 17th: ALL! CEO High Orientation (Kiva 6pm 7:30pm) 2 3 4 5 6 7 8 Sept 18th: ALL! CEO Orientation (Kiva 6pm 7:30pm) 9 10 11 12 13 14 15 *Parents please drop off/pick up
More informationEXPERIMENTAL INVESTIGATIONS ON 4- STROKE SINGLE CYLINDER DIESEL ENGINE (C.I) WITH CHANGING GEOMETRY OF PISTON
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 218, pp. 693 7, Article ID: IJMET_9_13_72 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=13
More informationEffect of Low Thermal Conductivity Materials on Performance of Internal Combustion Engine- A Review And Experimentation
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 15, Issue 1 Ver. III (Jan. - Feb. 2018), PP 87-94 www.iosrjournals.org Effect of Low Thermal Conductivity
More informationPerformance Analysis of 40 KW Solar Photovoltaic System at DTU
International Journal of Research and Scientific Innovation (IJRSI) Volume III, Issue VI, June 216 ISSN 2321 275 Performance Analysis of 4 KW Solar Photovoltaic System at DTU Dr. R. S. Mishra 1, Dr. J.
More informationResume. January 21, 2016 onwards. AMU 1988 First (Hons.) 76.38
General Information: Resume Page 1 Name ABU TARIQ Date of Birth May 1, 1967 Current Designation: Professor Faculty positions held: Lecturer April 16,1990-July 26, 1998 Lecturer ( Senior Scale) July 27,
More informationNational Institute of Technology, Tiruchirappalli: Performa for CV of Faculty/ Staff Members
Curriculum Vitae Dr. Vivek Mohan is a recent Post-Doctoral Fellow from The Hong Kong Polytechnic University, Hong Kong, with a Doctoral of degree in Energy with specialization in Electric Power System
More informationComputational Investigation of Normal and Hybrid Cooling Fins of Internal Combustion Engine
Computational Investigation of Normal and Hybrid Cooling Fins of Internal Combustion Engine Aswin Mohan, R. Titus, Adarsh Kumar.P.S Abstract In this research work a hybrid material (Aluminium-Copper) compound
More informationDate Event or Holiday :Sun, 2:Mon North Orchard Delong Preschool North Orchard Delong Preschool
2018 6 1 1:Sun, 2:Mon 2018-2019 Date Event or Holiday Aug 16 Board Meeting 6pm Aug 23 Open House June 2018 July 2018 August 2018 Sep 06 Board Meeting 6pm Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th
More informationBio data ( As on Nov 2015)
Bio data ( As on Nov 2015) 1. Name Dr Purnanand V Bhale Assistant Professor, SV National Institute of Technology, Surat (NIT Surat; Under MHRD Govt. of India) Areas of Interest Solar Thermal, Biogas, biodiesel,
More informationComparative Performance of Crude Pongamia Oil in A Low Heat Rejection Diesel Engine
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 10, Issue 3 (Nov. - Dec. 2013), PP 44-54 Comparative Performance of Crude Pongamia Oil in A Low
More informationPROFILE. Examination University Institute Year. Ph.D. * IIT Bombay IIT Bombay Osmania University. Osmania University
PROFILE Department of Electrical Engineering University College of Engineering(A) Osmania University, Hyderabad-500007 Telangana, India Phone: (040)27098628(O) Dr. B. Mangu Mobile No.: 9849794210 Professor
More informationResearch Article Studies on Exhaust Emissions from Copper-Coated Gasohol Run Spark Ignition Engine with Catalytic Converter
International Scholarly Research Network ISRN Mechanical Engineering Volume, Article ID 779, 6 pages doi:.//779 Research Article Studies on Exhaust Emissions from Copper-Coated Gasohol Run Spark Ignition
More informationResume. Mahdi Hedayati (+98) RESEARCH INTERESTS
Resume Mahdi Hedayati (+98) 26-3418 2763 m.hedayati@kiau.ac.ir mahdi_hedayati@yahoo.com RESEARCH INTERESTS Power electronics applications in power systems and electrical drives Power converters technologies
More informationInfluence of Injection Timing and Preheating on Exhaust Emissions of Di Diesel Engine with Air Gap Insulation with Linseed Biodiesel
International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347 5161 2016 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Influence
More informationAnalysis of Emission characteristics on Compression Ignition Engine using Dual Fuel Mode for Variable Speed
International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 4, Issue 3 (October 2012), PP. 23-27 Analysis of Emission characteristics on Compression
More informationExperimental Investigation of Emission Reduction by Blending Methanol, Ethanol and Biodiesel with diesel on C.I. Engine
Experimental Investigation of Emission Reduction by Blending Methanol, Ethanol and Biodiesel with diesel on C.I. Engine V. Veeraragavan1, M. Sathiyamoorthy 2 1. Assistant Professor, Department of Mechanical
More informationMarco W Migliaro - Publications
# Author and developer, CD ROM, "STATIONARY BATTERIES: A Pictorial Reference for Maintenance and Testing," The Battery Connector, Inc., ISBN 0-9655596-0-2, 1996. # Author, Section 18, "Batteries," Handbook
More informationInternational Journal of Innovative Research in Science, Engineering and Technology. (An ISO 3297: 2007 Certified Organization)
Influence of Ethanol Gasoline Blends on Performance Parameters and Combustion Characteristics Of Copper Coated Two Stroke Spark Ignition Engine With Gasohol S.Narasimha Kumar Asst. Professor, Department
More informationPerformance of copper coated spark ignition engine with methanol-blended gasoline with catalytic converter
Journal of Scientific & Industrial Research KRISHNA & KISHOR: COPPER-COATED SI ENGINE WITH METHANOL BLENDED GASOLINE 543 Vol. 67, July 2008, pp. 543-548 Performance of copper coated spark ignition engine
More informationExperimental Investigation of Performanec of Single Cylinder 4s Diesel Engine Using Dual Vegetable Oil Blended
ISSN : 2248-9622, Vol. 4, Issue 3( Version 1, March 2014, pp.78-85 RESEARCH ARTICLE OPEN ACCESS Experimental Investigation of Performanec of Single Cylinder 4s Diesel Engine Using Dual Vegetable Oil Blended
More informationINFLUENCE OF CERAMIC COATING ON PISTON SURFACE IN I.C ENGINE
INFLUENCE OF CERAMIC COATING ON PISTON SURFACE IN I.C ENGINE V. Mohan 1, N.Surya 2, D.Srinu 3 1, 2, 3 Assistant Professor, Department of Mechanical Engineering, TKRCET, Hyderabad, Telangana, (India) ABSTRACT
More informationOptimization of Fluid Coupling performance for Hybrid Power Transmission System
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 232-334X, Volume 14, Issue 4 Ver. III(Jul. Aug. 217), PP 39-44 www.iosrjournals.org Optimization of Fluid Coupling
More informationEFFECT OF EMULSIFIER ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DIESEL ENGINE USING PALM BIODIESEL
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 8, Issue 2, Apr 2018, 1243-1248 TJPRC Pvt. Ltd. EFFECT OF EMULSIFIER
More informationHEAT TRANSFER ANALYSIS IN A LOW HEAT REJECTION DI DIESEL ENGINE
National Journal on Advances in Building Sciences and Mechanics, Vol. 1, No.2, October 2010 6 HEAT TRANSFER ANALYSIS IN A LOW HEAT REJECTION DI DIESEL ENGINE Abstract Pradeep Kumar A.R. 1*, Annamalai K.
More informationSIAM Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy
Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy 10 th -12 th December 2001 Bangkok Indian Scenario Two types of I&M programmes
More information1 1st Quarter Ends/School Closes at Noon :00 AM Daylight Savings Time Ends :00 PM -8:00 PM Parent/Teacher conferences - No School
November 201 Oct 201 8 9 10 11 12 1 1 1 1 1 18 19 20 21 22 2 2 2 2 28 1 Dec 201 8 9 10 11 12 1 1 1 1 1 18 19 20 22 2 2 2 2 28 1 1 1st Quarter Ends/ 2 2nd Quarter Begins Picture Retakes 8 9 10 11 2:00 AM
More informationTHERMAL ANALYSIS OF DIESEL ENGINE PISTON USING 3-D FINITE ELEMENT METHOD
INTERNATIONAL JOURNAL OF MANUFACTURING TECHNOLOGY AND INDUSTRIAL ENGINEERING (IJMTIE) Vol. 2, No. 2, July-December 2011, pp. 97-102 THERMAL ANALYSIS OF DIESEL ENGINE PISTON USING 3-D FINITE ELEMENT METHOD
More informationThe Effect of Turbocharging on Volumetric Efficiency in Low Heat Rejection C.I. Engine fueled with Jatrophafor Improved Performance
The Effect of Turbocharging on Volumetric Efficiency in Low Heat Rejection C.I. Engine fueled with Jatrophafor Improved Performance R. Ganapathi *, Lecturer, Mechanical Engineering department, JNTUA College
More informationDIPLOMA IN MECHANICAL ENGINEERING (1020) Date and Day. Subject code
DIPLOMA IN MECHANICAL ENGINEERING (1020) code ( M-Scheme ) 32031 Strength of Materials 32032 Manufacturing Processes 32033 Machine Drawing I 1.11.2018 1 32041 Heat Power Engineering 32042 Special Machines
More informationExperimental studies for the role of piston rings face profiles on performance of a diesel engine fueled with diesel and jatropha based biodiesel
Journal SINGH of Scientific et al: PERFORMANCE & Industrial Research OF A DIESEL ENGINE FUELED WITH DIESEL AND JATROPHA BASED BIODIESEL Vol. 71, January 2012, pp. 57-62 57 Experimental studies for the
More informationJanuary During JANUARY. Sunday Monday Tuesday Wednesday Thursday Friday Saturday 1 Dec Feb 2011
January 2011 1 Dec 2010 Feb 2011 During JANUARY Happy New Year! -- Appoint Company Nominating Committee 1 2 3 4 -- Camp report to Company - Jan 155 6 7 8 9 10 11 6 7 8 9 10 11 12 12 13 14 15 16 17 18 13
More informationInvestigation of Effect of Intake Air Preheating By Heat Wheel on Performance and Emission Characteristics of Diesel Engine
Investigation of Effect of Intake Air Preheating By Heat Wheel on Performance and Emission Characteristics of Diesel Engine Pradip G. Karale 1, Dr. J.A. Hole 2 1 PG Student Mechanical Engineering Dept.
More informationCONTROL OF POLLUTANTS WITH CATALYTIC CONVERTER AND COPPER COATED CYLINDER HEAD IN METHANOL- GASOLINE BLEND OPERATED TWO STROKE SI ENGINE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 6, June 2015, pp. 132-138, Article ID: IJMET_06_06_013 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=6
More informationOMICS Group International is an amalgamation of Open Access publications
About OMICS Group OMICS Group International is an amalgamation of Open Access publications and worldwide international science conferences and events. Established in the year 2007 with the sole aim of
More informationUse of Alternative Fuel in Lower Heat Rejection Engine with Different Insulation Levels
International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 6, Number 4 (2013), pp. 499-506 International Research Publication House http://www.irphouse.com Use of Alternative Fuel
More informationAN EXPERIMENTAL STUDY ON THE EFFECT OF THERMAL BARRIER COATING ON DIESEL ENGINE PERFORMANCE
AN EXPERIMENTAL STUDY ON THE EFFECT OF THERMAL BARRIER COATING ON DIESEL ENGINE PERFORMANCE T.K.Chandrashekar 1, C.R.Rajshekar 2, R.Harish Kumar 3 Professor, Department of Mechanical Engineering,Channabasaveshwara
More informationPERFORMANCE IMPROVEMENT OF A DI DIESEL ENGINE WITH TURBOCHARGING USING BIOFUEL
ISSN: 3159-4 Vol. 2 Issue 1, January - 215 PERFORMANCE IMPROVEMENT OF A DI DIESEL ENGINE WITH CHARGING USING BIOFUEL Rasik S. Kuware, Ajay V. Kolhe Heat Power Engineering, Mechanical Department, Kavikulguru
More informationExperimental Investigations on a Four Stoke Diesel Engine Operated by Jatropha Bio Diesel and its Blends with Diesel
International Journal of Manufacturing and Mechanical Engineering Volume 1, Number 1 (2015), pp. 25-31 International Research Publication House http://www.irphouse.com Experimental Investigations on a
More informationEffect of Varying Load on Performance and Emission of C.I. Engine Using WPO Diesel Blend
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 12, Issue 2 Ver. V (Mar - Apr. 2015), PP 37-44 www.iosrjournals.org Effect of Varying Load on Performance
More informationup the formulas. You can copy/paste the formulas for the days within the same October 2017 Jan 1, 2 & 5 Student Christmas Break April 2018
School Year Calendar Template 2013-2014 Vertex42 LLC INSTRUCTIONS Year: 2017 Beginning Month: 8 Start day: 1 1:Sunday, 2:Monday «Choose the year and beginning month Note: If you choose Monday as the start
More informationGRD Journals- Global Research and Development Journal for Engineering Volume 1 Issue 12 November 2016 ISSN:
GRD Journals- Global Research and Development Journal for Engineering Volume 1 Issue 12 November 2016 ISSN: 2455-5703 Effect of Brake Thermal Efficiency of a Variable Compression Ratio Diesel Engine Operating
More informationPerformance and Emission Analysis of Diesel Engine using palm seed oil and diesel blend
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 2 Ver. VIII (Mar- Apr. 2014), PP 29-33 Performance and Emission Analysis of Diesel Engine
More informationCommercial-in-Confidence Ashton Old Baths Financial Model - Detailed Cashflow
Year 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Oct-16 Nov-16 Dec-16 Jan-17 Feb-17 Mar-17 Apr-17 May-17 Jun-17 Jul-17 Aug-17 Sep-17 Oct-17 2,038 2,922 4,089 4,349 6,256 7,124 8,885 8,885 8,885 8,885 8,885 8,885 9,107
More informationInternational Research Journal of Engineering and Technology (IRJET) e-issn: Volume: 04 Issue: 11 Nov p-issn:
International Research Journal of Engineering and Technology (IRJET) e-issn: 2395-56 Performance and emission characteristics of a constant speed diesel engine fueled with Rubber seed oil and Jatropha
More informationAPPLICATION OF THERMAL BARRIER COATING FOR IMPROVING THE SUITABILITY OF ANNONA BIODIESEL IN A DIESEL ENGINE
S973 APPLICATION OF THERMAL BARRIER COATING FOR IMPROVING THE SUITABILITY OF ANNONA BIODIESEL IN A DIESEL ENGINE by Senthil RAMALINGAM *, Elangovan MURUGESAN, Silambarasan RAJENDRAN, and Pranesh GANESAN
More informationExperimental Analysis of Utilization of Heat Using Methanol - Diesel Blended Fuel in Four Stroke Single Cylinder Water Cooled Diesel Engine
Experimental Analysis of Utilization of Heat Using Methanol - Diesel Blended Fuel in Four Stroke Single Cylinder Water Cooled Diesel Engine T. Singha 1, S. Sakhari 1, T. Sarkar 1, P. Das 1, A. Dutta 1,
More informationExperimental Investigation of Multi Cylinder Diesel Engine Using Rubber seed oil and Diesel
Experimental Investigation of Multi Cylinder Diesel Engine Using Rubber seed oil and Diesel Dr. Hiregoudar Yerrennagoudaru 1, Chandragowda M 2, Manjunatha K 3, Nagaraj Basavantappa Hugar 4 1 Professor
More informationExperimental Investigation of Performance and Emission Characteristics of Simarouba Biodiesel and Its Blends on LHR Engine
International OPEN ACCESS Journal Of Modern Engineering Research (IJMER) Experimental Investigation of Performance and Emission Characteristics of Simarouba Biodiesel and Its Blends on LHR Engine Vishwanath
More informationInventory Levels - All Prices. Inventory Levels - By Price Range
Inventory Levels - All Prices Idaho Falls Bonneville Total 3-Mar-17 152 108 260 2-Mar-18 109 78 187-28% Inventory Levels - By Price Range 3-Mar-17 2-Mar-18 0-100,000 41 6 100,001-125,000 19 8 125,001-150,000
More informationExhaust Waste Heat Recovery of I. C. Engine by Thermoelectric Generator
Exhaust Waste Heat Recovery of I. C. Engine by Thermoelectric Generator S. V. Chavan Department of Mechanical Engineering N. K. Orchid College of Engineering and Technology, Solapur, Maharashtra, India
More information6. Area of Specialization Additive manufacturing, 3D printing, Casting Technology, Nonconventional
BIO-DATA Dr. P.K.GARG 1. Name : Dr. Garg 2. Designation : Assistant Professor 3. Department : Mechanical Engineering 4. Date of Birth : 29-12-1976 5. Address : Department of Mechanical, Punjabi University,
More informationDesign and Development of Micro Controller Based Automatic Engine Cooling System
International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 6, Number 6 (2013), pp. 753-558 International Research Publication House http://www.irphouse.com Design and Development
More informationClement A. Skalski, Ph.D., P.E.
page 1 of 5 skalskic@comcast.net 860-673-7909 (Connecticut) 941-375-2975 (Florida) 860-402-8149 (cell) EXPERTISE! Elevators! Control Systems, Transducers, and Actuators.! Induction and PM Synchronous Motors,
More informationD.Baswaraj, 2 P.V.Krishna Murthy, 3 K.Prasanna Lakshmi 1 Jayaprakash Narayan College of Engineering, Dharmapur, Mahabubnagar.
International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 8, Number 1 (2018), pp. 25-38 Research India Publications http://www.ripublication.com A Review on Significant Parameters
More informationFaculty Profile & Publications FACULTY MEMBERS
Faculty Profile & Publications FACULTY MEMBERS Dr Ambarish Datta Qualification Ph.D. in Engineering from IIEST, Shibpur, 2017. M.E. (Automobile) from Jadavpur University, 2010. B.Tech. (Automobile) from
More informationInventory Levels - All Prices. Inventory Levels - By Price Range
Inventory Levels - All Prices Idaho Falls Bonneville Total 7-Apr-17 154 111 265 6-Apr-18 113 91 204-23% Inventory Levels - By Price Range 7-Apr-17 6-Apr-18 0-100,000 36 10 100,001-125,000 13 9 125,001-150,000
More informationUnits of Instruction MISD Pacing Guide Days Date Range Test Date
MISD Pacing Guide Date Range Test Date Introduction: Processes of Investigations (1 day) Aug. 21 Unit 01: Matter (12 days) Aug. 22-Sept. 7 Sep. 10 Unit 02: Atomic Structure and the Periodic Table (15 days)
More informationNational Conference on Latest Trends in Design & Testing of Transmission Line Components
Book-Post National Conference on Latest Trends in Design & Testing of Transmission Line Components 22-23 November 2010 To, Mr. M. Selvaraj Engineering Officer / Co-ordinator Mechanical Engineering Division
More information7th Grade Social Studies Pacing Guide Units of Instruction MISD Pacing Guide Days Date Range Test Date
7th Grade Social Studies MISD Pacing Guide Date Range Test Date Unit 01: Thinking Like a Historian (5 days for the entire unit) 5 Aug 27-31 Unit 02: Natural Texas and Its People 1200s-1800s (5 days for
More informationSTUDIES ON PERFORMANCE PARAMTERS OF DI DIESEL ENGINE WITH MEDIUM GRADE LHR COMBUSTION CHAMBER FUELLED WITH COTTONSEED BIODIESEL
STUDIES ON PERFORMANCE PARAMTERS OF DI DIESEL ENGINE WITH MEDIUM GRADE LHR COMBUSTION CHAMBER FUELLED WITH COTTONSEED BIODIESEL M.V.S. Murali Krishna 1 *, D. Srikanth 2, and P.Ushasri 3 1 Mechanical Engineering
More informationFriday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING
HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,
More informationGlendale Water & Power Smart Grid Project
Glendale Water & Power Smart Grid Project Key Dates in Project History Key Dates Project History On July 10, 2007, City Council directed GWP to develop a long term plan for smart meters On October 23,
More informationOptimal placement of SVCs & IPFCs in an Electrical Power System
IOSR Journal of Engineering (IOSRJEN) e-issn: 2250-3021, p-issn: 2278-8719 Vol. 3, Issue 5 (May. 2013), V3 PP 26-30 Optimal placement of SVCs & IPFCs in an Electrical Power System M.V.Ramesh, Dr. V.C.
More informationEUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Sustainable Mobility and Automotive Industry Brussels, 7 March 2014 ENTR/B4/GG (2014)651836 by email to: 1998Agreement-Missions@lists.unece.org,
More informationComparison of Swirl, Turbulence Generating Devices in Compression ignition Engine
Available online atwww.scholarsresearchlibrary.com Archives of Applied Science Research, 2016, 8 (7):31-40 (http://scholarsresearchlibrary.com/archive.html) ISSN 0975-508X CODEN (USA) AASRC9 Comparison
More informationHospitality & Tourism Management January 2015 Calendar Sunday Monday Tuesday Wednesday Thursday Friday Saturday 1 2 3
Jan-14 Week 1 Week 2 January 2015 Calendar 1 2 3 New Year's Day - 4 5 6 7 8 9 10 New Intake-L4 (EFTH) Assign-Presentation L4 Assign-Presentation L5 Last Exam Reg- CTH Assign Marking Assign Marking Module-
More informationFEM Analysis of Combined Paired Effect on Piston & Connecting Rod using ANSYS
FEM Analysis of Combined Paired Effect on Piston & Connecting Rod using ANSYS Kunal Saurabh Assistant Professor, Mechanical Department IEC Group of Institutions, Greater Noida - India kunalsaurabh.me@ieccollege.com
More informationATHANASIOS T. BALAFOUTIS
ATHANASIOS T. BALAFOUTIS EDUCATION 2005- Today PhD Candidate in Agricultural University of Athens Vegetable oil Use as fuel in Internal Combustion Engines 2004 School of Infantry Reserve Officers (Σ.Ε.Α.Π.)
More information