½ DODGE CUMMINS
|
|
- Marcus O’Neal’
- 5 years ago
- Views:
Transcription
1 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # ½ DODGE CUMMINS BD FlowMax LIFT PUMP KIT Installation Instructions P/N# PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLATION. The BD auxiliary lift pump kit will provide the safety and performance of enhanced fuel flow to your Cummins engine.
2 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Kit Contents: FlowMAX Lift Pump ¼ Flat Washer Lock Nut Tie Wrap (Medium) Qty: 1 Qty: 8 Qty: 4 Qty: FlowMAX Anti-Vibration Mount Hose Clamp -AN 8 ORB x 3/8 Barb Qty: 4 Qty: 7 Qty: Elbow Fitting ¼ NPT 3/8 barb OEM Lift Pump Adapter 3/8 Fuel Strainer Qty:1 Qty: 1 Qty: B FlowMAX Lift Pump Wiring Harness O-Ring 3/8 Fuel Hose Self Tap Qty: 1 Qty: 1 Qty: 78 Qty: FlowMax Mounting Bracket #10 Plated Washer 10/32 Nylock Nut Qty: 1 Qty: 4 Qty: 4
3 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Optional Accessories: Low Fuel Pressure LED Alarm kit X-Monitor Digital Gauge Package ( ) Fuel Pressure Kit (X-Monitor Accessory) Required Tools: 5mm Allen wrench Drill 1/8 and 13/64 Drill bits 1/4 UNC Tap Pliers 3/16 Flat Screwdriver 10 mm Socket or wrench Small Pipe Cutter Knife To Cut Fuel Hose
4 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Installation: 1. Disconnect both batteries. 2. Raise the vehicle and support it safely. 3. Locate and remove the factory lift pump. The pump is supported by four, 5mm socket cap screws. 4. Install the brass 90 NPT to barb fitting into the supplied aluminum pump bypass bracket. The brass elbow should be orientated so that the barbed end points down or oriented 90 to the mounting holes. You will need to use Teflon sealant to seal the threads. 5. Install the new o-ring on the fuel filter end of the adapter. Be sure to lubricate the o-ring before installing. 6. Position and press the bypass adapter onto fuel filter housing. Do not use mounting bolts to draw bypass adapter in to the filter housing. 7. Be sure the bypass adapter is positioned flat to the fuel filter housing. Install mounting bolts and evenly tighten to 7 N m (61 in. lbs.). 8. Connect fuel line extension hose to the brass barb fuel fitting. Make sure that by re-routing the hose it doesn t rub on anything. Allow the hose to hang during pump installation (optional: pinch the hose with some vise grips or clamps of some sort to prevent fuel leakage).
5 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Pump Installation 9. From underneath the vehicle, locate the cross member and skid plate underneath the transfer case. Remove the cross member/skid plate. There should be a total of 6 nuts/bolts to remove. Remove cross member and skid plate. 10. Once remove locate a clean installation point on the inside of the driver s side frame rail. 11. Use the supplied mounting bracket as a template to mark the mounting holes. Select a high enough location so when the pump is mounted it will not contact the cross member.
6 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Drill the marked holes and taped to ¼ UNC (drill bit #7 or 13/64 ) for mounting the rubber isolators. It is highly recommend that you center punch the center of your hole markings. 13. Install the 4 supplied rubber isolators (P/N# ).
7 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Mount the mounting bracket (P/N# ) to the rubber isolators. Use the supplied ¼ flat washers (P/N# ) and Nylock nuts (P/N# ) to secure the bracket to the isolators. 15. Before mounting mount, screw in the ORB to Barb fittings in both the inlet and outlet of the pump. Do not over tighten, it is an o-ring seal, not NPT. 16. Mount the FlowMax pump to the bracket. Use the provided #10-32 flat washers (P/N# ) and Nylock nuts (P/N# ) to secure the pump.
8 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # With the pump mounted, cut the hard fuel line about 12 ahead of the pump. The fuel supply line is the thickest of all three lines. You don t have to use a tube cutter as you will be removing the section of hard line. 18. Route the fuel line that you connected from the front of the vehicle to the outlet of the pump. Use a hose clamp to secure this connection. Trim to fit, the remainder of the hose will be used for the inlet of the pump. 19. Cut the hard fuel supply line once again, this time about 8 before the inlet of the pump. This time you will need to use a tube cutter. Install a small section of hose, then the fuel strainer. Finally connect the outlet of the fuel strainer to the inlet of the pump.
9 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Secure each connection with a hose clamp. Use two hose clamps when securing the rubber hose to the hard line. 21. Lay out the wiring harness so that it can be plugged into the stock fuel pump harness, plug into the new FlowMAX Fuel Pump, and place the positive and negative terminals in their approximate routing. Once the routing paths have been chosen and laid out, install the relay to the firewall with the use of self tapping screw.
10 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Wiring should be attached with the use of supplied tie wraps so that the wiring will be away from contacting hot surfaces and/or moving components. Once the wiring is attached and everything is in place the positive and negative terminals can be attached to the battery. 23. Make certain that all fuel lines, wiring harness are fixed in place well. 24. Lower the vehicle and re-install the battery cables. 25. Take the truck for a test drive and measure pump output pressures. The pump pressure sure idle at 15-18psi. If you experience any problems or difficulties with this kit, please contact the BD Technical Department at or fax at , between 8:00am and 4:30pm Pacific Time.
11 7 April ½ Dodge Cummins FlowMAX Lift Pump Kit # Trouble Shooting Wiring harness diagram If you have problems, complete the following tests or procedures, Clean and re-tighten battery terminals. Ensure there are no crimped/pinched sections of fuel line. Change Fuel Filter Check OEM connection to weather pack plug for 12V. Check that fuse in supplied harness near battery terminal is not blown. Check that all plugs are securely clipped together The pump should operate between 16 and 18psi with 14V at idle. If you have lower voltage, then the pump pressure will also be lower.
½ DODGE CUMMINS
19 October 2012 2003-04½ Dodge Cummins FlowMAX Lift Pump Kit # 1050305B - 1-2003-04½ DODGE CUMMINS BD FlowMax LIFT PUMP KIT Installation Instructions P/N# 1050305B PLEASE READ ALL INSTRUCTIONS CAREFULLY
More information½ DODGE CUMMINS
15 June 2016 #1050305D 2003-2004½ Dodge Cummins FlowMAX Lift Pump Kit (I-00169) - 1-2003-04½ DODGE CUMMINS BD FLOWMAX LIFT PUMP KIT Installation Instructions P/N# 1050305D PLEASE READ ALL INSTRUCTIONS
More informationDODGE CUMMINS 24V ISB
4 September 2013 1998-2002 Dodge Cummins FlowMAX Lift Pump Kit # 1050301C - 1-1998-02 DODGE CUMMINS 24V ISB FLOWMAX LIFT PUMP KIT I n s t a l l a t i o n I n s t r u c t i o n s Part# 1050301C PLEASE READ
More informationL/6.7L DODGE CUMMINS
10/19/2012 2005-08 5.9/6.7 Dodge Cummins FlowMAX Lift Pump Kit # 1050310B - 1-2005-09 5.9L/6.7L DODGE CUMMINS BD FLOWMax V2 LIFT PUMP KIT Installation Instructions P/N # 1050310B PLEASE READ ALL INSTRUCTIONS
More informationOEM BYPASS LIFT PUMP KIT
6 March 2014 # 1050227 2003-04.5 Dodge Cummins OEM Bypass Lift Pump Kit (I-00164) - 1-2003-04½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part # 1050227 PLEASE READ ALL INSTRUCTIONS
More informationL/6.7L DODGE CUMMINS
6/15/2016 #1050310D 2005-09 5.9/6.7 Dodge Cummins FlowMAX Lift Pump Kit (I-00170) - 1-2005-09 5.9L/6.7L DODGE CUMMINS BD FLOWMAX LIFT PUMP KIT Installation Instructions P/N # 1050310D PLEASE READ ALL INSTRUCTIONS
More informationL DODGE CUMMINS BD FLOWMAX LIFT PUMP KIT
6/15/2016 #1050311D 2010-12 6.7 Dodge Cummins FlowMAX Lift Pump Kit (I-00329) - 1-2010-12 6.7L DODGE CUMMINS BD FLOWMAX LIFT PUMP KIT Installation Instructions P/N # 1050311D PLEASE READ ALL INSTRUCTIONS
More informationDODGE CUMMINS 24V ISB
19 November 2009 1998-1999 Dodge Cummins OEM Bypass Lift Pump Kit # 1050230-1 - 1998-99 DODGE CUMMINS 24V ISB OEM BYPASS LIFT PUMP KIT I n s t a l l a t i o n I n s t r u c t i o n s Part# 1050230 PLEASE
More informationDODGE CUMMINS 24V ISB
2/9/2012 1998-2002 Dodge Cummins OEM Bypass Lift Pump Kit # 1050229-1 - 1998-2002 DODGE CUMMINS 24V ISB OEM BYPASS LIFT PUMP KIT Installation Instructions P/N# 1050229 PLEASE READ ALL INSTRUCTIONS CAREFULLY
More information½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part #
29 July 2005 2003-04.5 Dodge Cummins OEM Bypass Lift Pump Kit # 1050227-1 - 2003-04½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part # 1050227 PLEASE READ ALL INSTRUCTIONS CAREFULLY
More informationDODGE CUMMINS 24V ISB OEM BYPASS LIFT PUMP KIT Installation Instructions Part #
2/15/2006 2000-2002 Dodge Cummins OEM Bypass Lift Pump Kit # 1050229-1 - 2000-02 DODGE CUMMINS 24V ISB OEM BYPASS LIFT PUMP KIT Installation Instructions Part # 1050229 PLEASE READ ALL INSTRUCTIONS CAREFULLY
More informationL/6.7L DODGE CUMMINS
11/6/2009 2005-08 5.9/6.7 Dodge Cummins FlowMAX Lift Pump Kit # 1050310B - 1-2005-08 5.9L/6.7L DODGE CUMMINS BD FLOWMax V2 LIFT PUMP KIT Installation Instructions P/N # 1050310B PLEASE READ ALL INSTRUCTIONS
More informationAuxiliary Transmission Filter Kit
19 July 2012 Dodge Transmission Filter Kit # 1064017-1 - Auxiliary Transmission Filter Kit Part # Vehicle Application 1064017 Dodge 1994-2007 The BD Transmission Filter Kit will provide added security
More informationDODGE CUMMINS 24V ISB
6 November 2009 2000-2002 Dodge Cummins FlowMAX Lift Pump Kit # 1050301B - 1-2000-02 DODGE CUMMINS 24V ISB FLOWMAX LIFT PUMP KIT Installation Instructions Part# 1050301B PLEASE READ ALL INSTRUCTIONS CAREFULLY
More informationFlowMax Lift Pump Kit
15 June 2016 (1050316) 2008-2010 Ford 6.4L FlowMax Lift Pump Kit (I-00359) - 1-2008-2010 Ford 6.4L PowerStroke FlowMax Lift Pump Kit Installation Instructions P/N# 1050316 PLEASE READ ALL INSTRUCTIONS
More informationDuramax Lift Pump Kit 9-11 PSI Installation Instructions P/N# D
2001-10 Duramax Lift Pump Kit 9-11 PSI Installation Instructions P/N# 1050320D PLEASE READ ALL INSTRUCTIONS CAREULLY BEORE INSTALLATION Kit Contents 1500365-P2 1500330-D lowmax Lift Pump V3 lowmax Wiring
More informationBD Transmission Cooler Dodge (68RFE, 518, 47RH, 47RE & 48RE) Ford (All) & Chevy (Allison) Transmissions
20 September 2012 1030606 Transmission Cooler Instruction Manual 1 BD Transmission Cooler Dodge (68RFE, 518, 47RH, 47RE & 48RE) Ford (All) & Chevy (Allison) Transmissions P/N# 1030606-5/16 P/N# 1030606-3/8
More informationAuxiliary Transmission Filter Kit Designed For 7.3L Ford Powerstroke Trucks
18 October 2011 Ford 4R100 Transmission Filter Kit (1064013) - 1 - Auxiliary Transmission Filter Kit Designed For 7.3L Ford Powerstroke Trucks Part # Vehicle Application Type 1064013 Ford 1999-2003 4R100
More informationBD Dual Transmission Cooler Dodge (68RFE, 518, 47RH, 47RE & 48RE) Ford (5R110) & Chevy (Allison 1000) Transmissions
7 March 2018 1030606-DS Dual Transmission Cooler Instruction Manual (I-00214) 1 DOWNLOAD COLOR INSTALL MANUALS AT dieselperformance.com BD Dual Transmission Cooler Dodge (68RFE, 518, 47RH, 47RE & 48RE)
More informationBD Dual Transmission Cooler Dodge (68RFE, 518, 47RH, 47RE & 48RE) Ford (5R110) & Chevy (Allison 1000) Transmissions
8 January 2013 1030606-DS Dual Transmission Cooler Instruction Manual 1 BD Dual Transmission Cooler Dodge (68RFE, 518, 47RH, 47RE & 48RE) Ford (5R110) & Chevy (Allison 1000) Transmissions P/N# P/N# 1030606-DS-1/2
More informationAuxiliary Transmission Filter Kit Designed For 6.0/7.3L Ford Powerstroke Trucks Part # Vehicle Application Type
3 October 2016 Ford E4OD (1064012) Transmission Filter Kit (I-00222) - 1 - DOWNLOAD ENHANCED INSTALL MANUALS AT dieselperformance.com Auxiliary Transmission Filter Kit Designed For 6.0/7.3L Ford Powerstroke
More informationDodge Cummins Positive Air Shutoff
8 April 2013 2003-2007 5.9 Dodge Cummins Positive Air Shutoff 1 2003-2007 5.9 Dodge Cummins Positive Air Shutoff P/N# 1036720 P/N# 1036720-M UPLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION 8 April 2013
More informationAuxiliary Transmission Filter Kit
18 November 2009 Ford E4OD (1064012) Transmission Filter Kit - 1 - Auxiliary Transmission Filter Kit Designed For 6.0/7.3L Ford Powerstroke Trucks Part # Vehicle Application Type 1064012 Ford 1989-1997
More informationPart# PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION.
16 November 2009 HPCR Dodge Twin Turbo Kit #1045430 1 BD Twin Turbo R700 Kit 2003-2007 Dodge HPCR ISBe Installation Instructions Part# 1045430 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION. UNLESS AN
More informationPRODUCT SAFETY NOTICE
PRODUCT SAFETY NOTICE Congratulations. This vehicle has been equipped with a Firestone air suspension system. This suspension will enhance the vehicle s handling when loaded, however, the vehicle s performance
More informationDodge Cummins Positive Air Shutoff
21 October 2011 2003-2007 5.9 Dodge Cummins Positive Air Shutoff 1 2003-2007 5.9 Dodge Cummins Positive Air Shutoff P/N# 1036720 P/N# 1036720-M UPLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION 21 October
More informationINSTALL MANUAL D o d g e 1 2 v 6 B T A PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION.
PN#1045310 12V Dodge Twin Turbo Kit (I-00273) 1 INSTALL MANUAL BD Twin Turbo Kit 1994-1 9 9 8 D o d g e 1 2 v 6 B T A Part# 1045310 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION. * Picture as shown
More informationINSTALLATION INSTRUCTIONS AIR/OIL SEPARATOR KIT
INSTALLATION INSTRUCTIONS AIR/OIL SEPARATOR KIT 2015+ SUBARU WRX (LHD ONLY) Document: 19-0136 Support: info@radiumauto.com This document covers the installation of the Radium brake master cylinder brace
More informationBD TrackMaster S D o d g e H P C R Installation Instructions
7 July 2016 PN#1045701, 1045702, 1045704 Dodge 6.7L TMS400 (I-00361) 1 BD TrackMaster S400 2008-2012 D o d g e H P C R Installation Instructions 1045701 2008-2009 Dodge 6.7L TMS400 1045702 2010-2012 Dodge
More informationFord 7.3L Powerstroke Positive Air Shutoff
24 October 2012 Ford 7.3L 1999.5-2003 Positive Air Shutoff 1 1999.5-2003 Ford 7.3L Powerstroke Positive Air Shutoff P/N# 1036700 P/N# 1036700-M UPLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION 24 October
More information3 October 2016 PN# V Dodge Twin Turbo Kit (I-00274) ½ D o d g e 2 4 v I S B
3 October 2016 PN#1045320 24V Dodge Twin Turbo Kit (I-00274) 1 DOWNLOAD ENHANCED INSTALL MANUALS AT dieselperformance.com BD Twin Turbo Kit 1998½- 2 0 0 2 D o d g e 2 4 v I S B Part# 1045320 PLEASE READ
More informationFord Racing 4.6L 3V Crate Engine Control Pack
Ford Racing 4.6L 3V Crate Engine Control Pack Installation Time: 3-6 hours on a Foxbody Mustang Tools Required: Basic English and Metric Socket and Wrench Set Flat and Phillips Screwdrivers Torx bits Hammer
More informationINSTALLATION INSTRUCTIONS FUEL SURGE TANK KIT
INSTALLATION INSTRUCTIONS FUEL SURGE TANK KIT BMW E46 3-Series, Excl Convertible Document: 19-0056 Support: info@radiumauto.com Relieve fuel pressure in vehicle before beginingthe installation. Disconnect
More informationTusk UTV Horn & Signal Kit Installation Instructions
Tusk UTV Horn & Signal Kit Installation Instructions The Tusk UTV signal kit is designed to be a simple way to provide front and rear turn signals, license plate mount with light, horn, and rearview mirrors
More informationSHELBY GT500
2007-2009 SHELBY GT500 Removal of Factory Unit WARNING: 1. Radiator fluid must be handled properly. Please observe local ordinances with regards to handling and disposal. 2. Allow vehicle and components
More informationDodge Cummins Positive Air Shutoff
1 INSTALL MANUAL 2010-2012 6.7 Dodge Cummins Positive Air Shutoff P/N# 1036722 P/N# 1036722-M UPLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION An Information decal has been provided in this kit. This
More informationFord 6.7L Powerstroke Positive Air Shutoff
8 April 2013 Ford 6.7L 2011-2012 Positive Air Shutoff 1 2011-2012 Ford 6.7L Powerstroke Positive Air Shutoff P/N# 1036703 P/N# 1036703-M UPLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION BD Engine Brake
More informationINSTALLATION INSTRUCTIONS FUEL RAIL
INSTALLATION INSTRUCTIONS FUEL RAIL MITSUBISHI EVO X Document# 19-0067 Support: info@radiumauto.com WARNING: DON'T SMOKE OR WORK WITH OPEN SPARKS WHILE WORKING ON THE FUEL SYSTEM PREPARING THE VEHICLE:
More informationYour Legal Fuel Tank Source.
February 23, 2015 IS# 808 Page 1 of 13 THANK YOU FOR PURCHASING A TRANSFER FLOW 40 GALLON TOOLBOX REFUELING SYSTEM. PLEASE READ THE FOLLOWING PROCEDURES CAREFULLY BEFORE STARTING THE INSTALLATION. CAUTION:
More informationIAG Competition Series Air / Oil Separator (AOS) For WRX
P IAG Competition Series Air / Oil Separator (AOS) For 2015-16 WRX Part# IAG-ENG-7252 Tools Required: Ratchet, torque wrench, extensions, needle nose pliers, hose cutter, snips/scissors, flat head screw
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM S2000 AII 26324 Issue Date OCT 2004 PARTS LIST Headrest Speaker System P/N 08A54-S2A-100 3 Small wire ties 2 Headrest speakers 9
More informationDodge Cummins Positive Air Shutoff
10 June 2013 1998-2002 24V 5.9 Dodge Cummins Positive Air Shutoff 1 1998.5-2002 5.9 Dodge Cummins Positive Air Shutoff P/N# 1036719 P/N# 1036719-M UPLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION 10 June
More informationGM 6.6L (LML) Duramax Positive Air Shutoff 2.5 CAC TUBES
8 April 2013 1036713 GM/Chevy Duramax 2011-2013 (LML) Positive Air Shutoff 1 2011-2013 GM 6.6L (LML) Duramax Positive Air Shutoff 2.5 CAC TUBES P/N# 1036713 P/N# 1036713-M UPLEASE READ ALL INSTRUCTIONS
More informationFrame. Axle. Kit No Please read these instructions completely before proceeding with installation. Figure 1. Kit Parts List FORWARD B J
Kit No. 70 Please read these instructions completely before proceeding with installation by www.airliftcompany.com MN-7 (008) ECN 08 Item P/N Description Qty. A B C D E F H I 807 0770 0006 88 70 87 8 8
More informationINSTALLATION INSTRUCTIONS BILLET FUEL RAIL KIT
INSTALLATION INSTRUCTIONS BILLET FUEL RAIL KIT MITSUBISHI LANCER EVOLUTION X Document# 19-0067 Support: info@radiumauto.com WARNING: DON'T SMOKE OR WORK WITH OPEN SPARKS WHILE WORKING ON THE FUEL SYSTEM
More informationPFF WSP
3 February 2014 1050340 - FlowMax Fuel Filter Kit (I-00172) - 1 - Flowmax Filter Kits Installation Instructions This kit is designed for V3 Flomax pumps only P/N# P/N# 1050340-PFF 1050340-WSP PLEASE READ
More informationAC 110V POWER OUTLET INSTALLATION INSTRUCTIONS. Part No. Application 1. PRE INSTALLATION / INSTALLATION OVERVIEW 2. KIT CONTENTS H7110AJ100
Part. Application H70AJ00 LEGACY / OUTBACK 0MY w/ HK audio LEGACY / OUTBACK 0MY w/o HK audio AC 0V POWER OUTLET INSTALLATION INSTRUCTIONS Page. -6,9-5 Page. -4,7-5. PRE INSTALLATION / INSTALLATION OVERVIEW
More informationONBOARD AIR SYSTEM FOR ALL VEHICLES APPLICATIONS
ONBOARD SYSTEM FOR ALL VEHICLES APPLICATIONS Thank you and congratulations on the purchase of a Pacbrake onboard air system. Please read the manual prior to starting to ensure you can complete the installation
More informationHP10098 BASIC INDEPENDENT AIR SPRING ACTIVATION KIT
HP10098 BASIC INDEPENDENT AIR SPRING ACTIVATION KIT Thank you and congratulations on the purchase of a Pacbrake basic independent air spring activation kit. Please read the entire installation manual prior
More informationOwner smanual. Banks Techni-Cooler System Dodge 6.7L Cummins (24-valve) ISB Pickup Trucks (2500/3500) USE WITH SYSTEM P/N 25987
Owner smanual with Installation Instructions Banks Techni-Cooler System 2013-16 Dodge 6.7L Cummins (24-valve) ISB Pickup Trucks (2500/3500) USE WITH SYSTEM P/N 25987 Gale Banks Engineering 546 Duggan Avenue
More informationSetting the World s Performance Standards
Setting the World s Performance Standards 743 East Iona Road, Idaho Falls, ID 83401, (208) 529-0244 Fax (208) 529-9000 Forced Air Hot Air Elimination Kit (Bed Fan Kit) For 800 RZR-4 P/N 67-165 Kit Contents:
More informationGM 6.6L (LLY, LZB, LMM) Duramax Positive Air Shutoff 2.5 CAC TUBES
8 April 2013 1036712 GM/Chevy Duramax 2004.5-2010 (LLY,LBZ,LMM) Positive Air Shutoff 1 2005-2010 GM 6.6L (LLY, LZB, LMM) Duramax Positive Air Shutoff 2.5 CAC TUBES P/N# 1036712 P/N# 1036712-M UPLEASE READ
More informationIAG Street Series Air / Oil Separator (AOS) For 2017 WRX
P IAG Street Series Air / Oil Separator (AOS) For 2017 WRX Part# IAG-ENG-7152 Tools Required: Ratchet, torque wrench, extensions, needle nose pliers, hose cutter, snips/scissors, flathead screwdriver,
More informationIAG Street Series Air / Oil Separator (AOS) For WRX
P IAG Street Series Air / Oil Separator (AOS) For 2015-16 WRX Part# IAG-ENG-7152 Tools Required: Ratchet, torque wrench, extensions, needle nose pliers, hose cutter, snips/scissors, flat head screw driver,
More informationPRODUCT SAFETY NOTICE DEALER/INSTALLER NOTICE
PRODUCT SAFETY NOTICE Congratulations. This vehicle has been equipped with a Firestone air suspension system. This suspension will enhance the vehicle s handling when loaded, however, the vehicle s performance
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory P/N 08E10-TA0-100 Application 2008 ACCORD 2-AND 4-DOOR Publications No. AII 35358 Issue Date AUG 2007 PARTS LIST Ambient Light Kit 2 Ambient lights Fuse label Washer
More informationINSTALLATION INSTRUCTIONS Accessory ACCESSORY HANDSFREELINK (WITH MOON) Application 2009 PILOT Publications No. AII 39492 Issue Date MAY 2008 PARTS LIST HFL Attachment Kit 2 Washer screws, 4 x 12 mm HFL
More informationDodge Cummins Positive Air Shutoff
21 October 2011 1998-2002 24V 5.9 Dodge Cummins Positive Air Shutoff 1 1998.5-2002 5.9 Dodge Cummins Positive Air Shutoff P/N# 1036719 P/N# 1036719-M UPLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION 21
More informationGrimmSpeed Install Guide Series Installing the GrimmSpeed WRX Boost Control Solenoid Updated 4/14/15
GrimmSpeed Install Guide Series Installing the GrimmSpeed 2015+ WRX Boost Control Solenoid Updated 4/14/15 Introduction: This guide will illustrate the installation of the GrimmSpeed 2015+ WRX Boost Control
More informationSKID MARK GARAGE. Axillary Fuel Supply
1 SKID MARK GARAGE Axillary Fuel Supply *Disclaimer: Our Axillary Fuel kits are designed to fit most late model GM vehicles with minimum modifications. While not quite a universal kit for all, it has been
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS COOLANT EXPANSION TANK FORD FOCUS Document: 19-0151 Support: info@radiumauto.com WARNINGS: DO NOT WORK ON THE COOLANT SYSTEM WHEN THE ENGINE IS AT OPERATING TEMPERATURE. WAIT
More informationDual Remote Filtration System Installation and Servicing Instructions
IMPORTANT NOTICE Read all instructions completely before attempting to install this unit. Improper installation could result in serious system and/or equipment damage. The installation of this system is
More informationSALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT
= SALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT INSTALLATION MANUAL: 2005-09 Mustang 4.6L 3V P/N: 10-8002-C12000B KIT P/N: 10-2903-B11511* Saleen Performance, Inc. 1225 East Maple Rd. Troy,
More informationHP10134 & HP10135 KITS BASIC SIMULTANEOUS AIR SPRING ACTIVATION KIT
HP10134 & HP10135 KITS BASIC SIMULTANEOUS AIR SPRING ACTIVATION KIT Thank you and congratulations on the purchase of a Pacbrake simultaneous air spring activation kit. This kit was designed to add in-cab
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. REAR VIEW CAMERA ATTACHMENT PILOT AII 23620 Issue Date MAY 2002 PARTS LIST Attachment Kit : P/N 08B21-S9V-100 Control unit harness Rear
More informationGMC Duramax (LBZ) High Idle Kit Note: Only for automatic transmissions with cruise control
U 17 December 2014 (1036606) 2006-07 GMC Duramax (LBZ) High Idle Kit (I-00318) 1 GMC Duramax (LBZ) High Idle Kit Note: Only for automatic transmissions with cruise control 1036606 2006-2007 GMC Duramax
More informationPart # Mopar LX Level 1 Air Suspension System
Part # 13040199 05-14 Mopar LX Level 1 Air Suspension System Front Components: 1 1304409 Front RQ ShockWave Kit for Stock Lower Arms Rear Components: 1 13044099 Rear CoolRide Kit 1 13040709 RQ Series Rear
More informationRemove black panel shown. Save 6 retaining pins for re-install later. Pry up on center part of pin first. Then pry out entire retaining pin.
2005-2009 Ford Mustang V6 Fog Light Wiring Kit Parts List: Quantity: Tools Required: Wiring harness 1 Flat head screwdriver Supplemental wire leads 2 Ratchet & Socket set OR Wire tap red 2 Adjustable Wrench
More information4 December 2017 PN# , , Dodge 6.7L Rumble B SXE (I-00400) 1. BD Rumble B SXE. D o d g e 6. 7 L H P C R Installation Instructions
4 December 2017 PN#1045705, 1045706, 1045708 Dodge 6.7L Rumble B SXE (I-00400) 1 DOWNLOAD ENHANCED INSTALL MANUALS AT dieselperformance.com BD Rumble B SXE D o d g e 6. 7 L H P C R Installation Instructions
More informationC44090 HP325 PACBRAKE COMPRESSOR CONVERSION
C44090 HP325 PACBRAKE COMPRESSOR CONVERSION APPLICATIONS: DODGE 2003-2007 5.9L CUMMINS Compressor Replacement Instructions for C14030, C14045, C44030, C44045, C44049 & C44052 with Air Tank KIT CONTENTS
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 30518 KIT 2006 PILOT Issue Date NOV 2005 NOTE: Accessory ATF and power steering coolers are required when installing the trailer hitch.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 22903-22963 ODYSSEY Issue Date MAY 2002 PARTS LIST Subwoofer Kit: P/N 08A39-EP7-100 Subwoofer 2 Cushion tapes 8 Wire ties (1 not used)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory HITCH Application 2009 CR-V Publications No. AII 40373 Issue Date AUG 2008 PARTS LIST Plain washer, 12 mm Trailer Hitch Kit P/N 08L92-SWA-100 Trailer hitch 6 Spring
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 03 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More information3.5-4 GENERIC POSITIVE AIR SHUTOFF
3 October 2016 1036732 1036733 Generic Positive Air Shutoff (I-00189) 1 DOWNLOAD ENHANCED INSTALL MANUALS AT dieselperformance.com 3.5-4 GENERIC POSITIVE AIR SHUTOFF P/N# 1036732 P/N# 1036732-M P/N# 1036733
More informationREAD INSTRUCTIONS COMPLETELY BEFORE BEGINNING INSTALLATION
INSTALLATION INSTRUCTIONS Hot Fox In-Tank Fuel Warmer READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING INSTALLATION Models covered by these instructions include: HFG 0-0 HFG 0- SHFT--0- SHH--0 TWHF 0- HFG
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 25877 PILOT Issue Date AUG 2003 Optional ATF and power steering coolers are required when installing the trailer hitch. 2 Spacers PARTS
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory P/N 08E10-TA0-110A Application 2012 ACCORD 2- AND 4-DOOR Publications No. AII 46501 Issue Date AUG 2011 PARTS LIST Ambient Light Kit Fuse label 2 Ambient lights Washer
More informationWater in Fuel Sensor Kit
03/08/2016 1050355-1050356 Water in Fuel Sensor Kit (I-00369) 1 Water in Fuel Sensor Kit Fast and Accurate Detection of Water in Diesel Fuel 1050355 Universal Kit For use with BD FlowMax water separator
More informationIAG Competition Series Air / Oil Separator (AOS) For 2017 STI
P IAG Competition Series Air / Oil Separator (AOS) For 2017 STI Part# IAG-ENG-7251 Tools Required: Ratchet, torque wrench, extensions, needle nose pliers, hose cutter, snips/scissors, flat head screw driver,
More informationProcharger Stage II Intercooled Supercharger System (11-14 GT)
Procharger Stage II Intercooled Supercharger System (11-14 GT) Installation Time: Approximately one day. Installed on 2012 Mustang GT 5.0/Manual Required Tools 3/8 Socket Set (Standard and Metric) 1/2
More informationKit No Please read these instructions completely before proceeding with installation. Air Spring Kit Parts List. Bracket Attaching Hardware
Kit No. 59532 MN-572 (021108) ECR 7136 Please read these instructions completely before proceeding with installation Air Spring Kit Parts List A Item Description Quantity A Air Sleeves 2 B Upper Brackets
More informationTJ YJ LJ STEP SLIDER INSTALLATION
TJ YJ LJ STEP SLIDER INSTALLATION BD-SS-100-TJ, BD-SS-100-YJ, BD-SS-100-LJ PARTS LIST QTY DESCRIPTION 1 Drivers Side Slider Assembly 1 Passenger Side Slider Assembly 1 Wiring Harness 1 Double Sided Sticky
More informationInstallation instructions for IPS parking Brake Kit for 1996 to 2002 Viper
Installation instructions for IPS parking Brake Kit for 1996 to 2002 Viper WARNING Modification of your vehicle with the parts identified above may alter its stock performance; the buyer hereby expressly
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. SYSTEM 2005 ACCORD All 27511 (DX, LX) 2-AND 4-DOOR Issue Date AUG 2004 PARTS LIST Security System Attachment (LX): P/N 08E55-SDA-100A Unit
More informationInstallation of Auto Meter Cobalt Boost/Vacuum Gauge:
Installation of Auto Meter Cobalt Boost/Vacuum Gauge: Fitment: All 79-14 models. This installation was completed on a 2004 Mustang GT, and should be identical for all 1999-2004 model Mustangs. Time needed:
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. P/N 08E49-S2A-100 2004 S2000 AII 26325 Issue Date OCT 2003 PARTS LIST Hood switch harness TOOLS AND SUPPLIES REQUIRED #2 Phillips screwdriver
More informationwith installation boost GAUGE this manual is for use with systems
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 gale banks engineering 546 duggan avenue azusa, ca 91702 (626) 969-9600 www.bankspower.com
More informationToyota 4RUNNER With/MR Overhead Video
Toyota 4RUNNER With/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit-00110-14, Beige 00016-00120; Fit Kit-00120-14, Gray Accessory Code: ED7 Conflicts: Vehicles without a sunroof Kit Contents:
More information2015+ HELLCAT 6.2L HEMI System vehicle specific plate system xx
These installation instructions will guide you through installing the Nitrous Outlet 2015+ Hellcat 6.2L Hemi Vehicle Specific Plate System on your vehicle. Before you get started, remember to never use
More informationDodge Cummins Positive Air Shutoff
1998-2002 24V 5.9 Dodge Cummins Positive Air Shutoff (I-00181) 1 INSTALL MANUAL 1998.5-2002 5.9 Dodge Cummins Positive Air Shutoff P/N# 1036719 P/N# 1036719-M UPLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION
More informationIAG Street Series Air / Oil Separator (AOS) For WRX & WRX STI
IAG Street Series Air / Oil Separator (AOS) For 2006-07 WRX & 2004-07 WRX STI Part# IAG-ENG-7150 Tools Required: Ratchet, torque wrench, extensions, needle nose pliers, hose cutter, snips/scissors, flat
More informationMFH-5456 On-Engine Block & Manifold Freshwater Cooling Kit for Mercury Remanufacturing 357 Engines Instructions
MFH-5456 On-Engine Block & Manifold Freshwater Cooling Kit for Mercury Remanufacturing 357 Engines Instructions MONITOR PRODUCTS, INC. 15400 Flight Path Dr Brooksville, FL 34604 Tel: 1-800-334-4591 or
More informationThese instructions were written for reference only and the use of a factory service manual is recommended.
Introducing the CorkSport High Pressure Fuel Line designed for the MZR DISI. This fuel line is designed to replace the OEM fuel line which are prone to failure at the brazed connection at the rail. The
More informationWOC & WOC Top & Back Installation Instructions
Shown with optional Sun Roof WOC-900500-2 & WOC-900501-2 Top & Back Installation Instructions Install Order! Heater Door System Wiper on to Windshield Windshield Rear Panel Top Panel Tools needed: 5/16
More informationFOG-LAMPS INSTALL KIT
FOG-LAMPS INSTALL KIT DODGE RAM (BR, BE) Installation Instructions Read entire instructions thoroughly before starting. For proper removal and installation, follow procedures in the service manual. NOTES:
More information13 March F Dodge Adjustable Track bar with Relocation Bracket (I-00201) 1
13 March 2014 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket (I-00201) 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 P/N# 1032011-F UPLEASE READ ALL INSTRUCTIONS
More informationInstallation Instructions PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION
1 GMC/CHEVY LMM DURAMAX (2007.5-10) FOR 2500 & 3500 SERIES PICKUPS V A R I A B L E V A N E E X H A U S T B R A K E Installation Instructions P/N# 2001030 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION
More information