Parts Rollers. Urethane Rollers Urethane Idlers 1.38" Flange Rollers 2.5" 2.5" 2.5" 4" 9.5" 3.6" 6.56"
|
|
|
- Benjamin Burke
- 5 years ago
- Views:
Transcription
1 A full line of drive sprockets, friction drive rollers, shakers, flails, and rollers of all types (steel, urethane, and rubber) are available for use with Noffsinger Belt Chain and Hook Chain conveyors. These products are constructed from many types of materials for various conditions and applications. Parts
2 Urethane Rollers 2.50 Parts Rollers X 3.5" UR/STL H.T. Steel " UR/STL Urethane Idlers 1.38" X UR/STL 3.5" " " Flange Rollers 6" 3.6" 6" 4" 9.5" 6.56" H.T. STEEL URETHANE H.T. STEEL URETHANE ST
3 Rollers 1.5" " 5.0" X 8.0" X 5.0" X 3.5" UR/STL H.T STEEL " UR/STL " 3.5" UR/STL " UR/STL " UR/STL " UR/STL " X 3.5" UR/STL H.T. Steel " UR/STL Urethane Idlers X.63" 4-2
4 Rollers Rubber or Solid Urethane 3.25" 4-3
5 Rollers Heat Treated Steel Rollers 1.9" 3.0" 4.0" 4.0" 2.75" H.T. STEEL " H.T. STEEL H.T. STEEL " 3.0" 5.0" 4.0" 6.0" 4.5" 6.0" 4.5" H.T. STEEL H.T. STEEL H.T. STEEL " 1.37" 1.0" 3.0" 4.0" 2.62" X 4.75" 3.5" 1.0" H.T. STEEL ROLLER STANDOFF ASSEMBLY H.T. STEEL 4.0" " " H.T. STEEL
6 Rollers 3.0" 4.5" 3.6" Steel Shakers H.T. STEEL " Urethane Shakers 3.5" /2" BORE /8" BORE " RUBBER URETHANE 4-5
7 Star Rollers- Complete part number list on page 4-10,4-11 Parts Molded.8".8" 1.275" 5.5" 1.275" 6.5" 3" Hex, Rib, & Clod- Complete part number list on page Specialty rollers available on request
8 Flails - Complete part number list on page ".8" 2" Parts Molded 14" 12" 12" Finger Guard.5".5" 2" 2" " 2" " 1.5" Width= 2" 4-7
9 Sprockets Hook Chain Sprocket Belted Chain Sprocket High Profile Noffsinger hook and belt chain steel sprockets are made from the highest grade cast iron with the maximum amount of chrome added for extended life. Steel cut and urethane sprockets are also available.noffsinger has special patterns made exclusively for every sprocket. They are presisiondesigned to exactly match the chain pitch and sprocket run requirements. With Noffsinger's sprockets, there's no loose or sloppy fit because the pattern has been properly engineered. There are a variety of style, with pitches and number of teeth to fit any type of machinery
10 Belt Chain Sprockets Diameter Hook Chain Sprockets Diameter Hook Chain Sprockets Diameter 14T28MM 5-3/4" 14T /8" 8T /2" 18T28MM 7-3/4" 16T /2" 9T /4" 22T28MM 8-1/2" 18T /4" 10T175 7" 24T /4" 12T /8" 12T32MM 6" 14T /2" 16T32MM 8" 12T /4" 18T32MM 8-1/2" 8T /4" 12T116(32) 5" 10T /16" 10T36MM 5-3/4" 14T116(32) 5-7/8" 12T /4" 12T36MM 6-1/2" 16T116(32) 6-1/2" 14T /8" 14T36MM 7-3/4" 18T116(32) 7-3/8" 16T36MM 8-1/2" 20T116(32) 8-1/4" 7T /4" 8T /8" 10T40MM 6" 10T /2" 9T /4" 12T40MM 7-3/8" 11T125 5" 10T /2" 14T40MM 8-1/2" 12T /8" 12T200 9" 14T /16" 10T42MM 6-1/2" 16T /16" 8T225 7" 12T42MM 8" 18T125 8" 10T /8" 14T42MM 8-7/8" 20T /8" 8T /4" 8T45MM 5-3/4" 10T1375(42) 5-3/16" 12T /2" 9T45MM 6-5/16" 12T1375(42) 5-7/8" 10T45MM 7-1/8" 14T1375(42) 7" 8T /4" 12T45MM 8-1/8" 16T1375(42) 7-3/4" 10T /2" 14T45MM 9" 9T /4" 6T /4" 8T50MM 6-3/4" 10T156 6" 5T /4" 10T50MM 8" 12T /16" 12T50MM 9-3/8" 14T /8" 14T50MM ( 5/8"rod exclude) 10-3/4" 16T156 9" 18T156 10" 5T150MM 11-3/8" 6T126MM 11" 6T135MM 12" 7T150MM 14-3/4" 8T56MM 6-3/4" 10T56MM 8-7/8" Sprockets Dimensions Noffsingermfg.com 4-9
11 Ordering PART# DESCRIPTION IDLER ROLLERS ROLLER,IDLER 400D 088RD 100W ROLLER,IDLER 400D 100RD 100W ROLLER,IDLER 500D 100RD 100W ROLLER,IDLER 500D 125SQ 275W ROLLER,IDLER 500D 150SQ 275W RIB ROLLERS ROLLER,RIB 14X RD 55D ROLLER,RIB 14X RD 55D ROLLER,RIB 14X SQ 55D ROLLER,RIB 16X RD 45D ROLLER,RIB 16X SQ 45D CLOD ROLLER ROLLER,CLOD 3" SMOOTH, LKD ROLLER,CLOD 3" SMOOTH, ART ROLLER,CLOD 3-1/2" SMOOTH, LKD ROLLER,CLOD 3-1/2" SMOOTH, ART ROLLER,CLOD 4" SMOOTH, LKD ROLLER,CLOD 4" SMOOTH, ART ROLLER,CLOD 5" SPIRAL, LKD ROLLER,CLOD 5" SPIRAL, ART ROLLER,CLOD 10" SPIRAL, LKD ROLLER,CLOD 10" SPIRAL, ART HEX OR SHAFT DRIVE ROLLER,CLOD 3" SMOOTH, Hex ROLLER,CLOD 3" SMOOTH, ST ROLLER,CLOD 3-1/2" SMOOTH, Hex ROLLER,CLOD 3-1/2" SMOOTH, ST ROLLER,CLOD 4" SMOOTH, Hex ROLLER,CLOD 4" SMOOTH, ST ROLLER,CLOD 5" SPIRAL, Hex ROLLER,CLOD 5" SPIRAL, ST *Most rubber molded parts are available in red urethane. Please inquire with sales for details. 4-10
12 Ordering ACORN ROLLERS ACORN,FULL 100RD 45D ACORN,FULL 125RD 45D ACORN,FULL 125SQ 45D ACORN,HALF 100RD 45D ACORN,HALF 125RD 45D ACORN,HALF 125SQ 45D FLAILS FLAIL,RUBBER 12 TAPERED 062B 75D FLAIL,RUBBER 14 TAPERED 062B 75D FLAIL,RUBBER 12 STRAIGHT 062B 75D FINGER ROLLER ROLLER,FINGER 550D 275L 125B 6PT 45D ROLLER,FINGER 550D 275L 150B 6PT 45D ROLLER,FINGER 550D 300L 125B 6PT 45D ROLLER,FINGER 550D 300L 150B 6PT 45D ROLLER,FINGER 550D 350L 125B 6PT 45D ROLLER,FINGER 550D 350L 150B 6PT 45D ELIMINATOR STAR ROLLERS ROLLER,STAR 525D 125L 125B 10PT 45D ROLLER,STAR 525D 125L 150B 10PT 45D ROLLER,STAR 625D 125L 125B 6PT 55D ROLLER,STAR 625D 125L 125B 6PT 70D ROLLER,STAR 625D 125L 150B 6PT 55D ROLLER,STAR 625D 125L 150B 6PT 70D ROLLER,STAR 650D 125L 125B 14PT 55D ROLLER,STAR 650D 125L 125B 14PT 70D ROLLER,STAR 650D 125L 150B 14PT 55D ROLLER,STAR 650D 125L 150B 14PT 70D ROLLER,STAR 650D 275L 125B 5PT 45D SPACERS FOR STAR ROLLERS SPACER,RUBBER 225D 025L 125B SPACER,RUBBER 225D 038L 125B SPACER,RUBBER 225D 044L 125B SPACER,RUBBER 225D 062L 125B BUSHING /2" Bore x 1-1/4" Long x 5/8" OD /2" Bore x 3/4" Long x 5/8" OD *Most rubber molded parts are available in red urethane. Please inquire with sales for details. 4-11
13 Ordering STAR ROLLERS ROLLER,STAR 525D 275L 125B 5PT 45D ROLLER,STAR 625D 125L 125B 6PT 55D ROLLER,STAR 625D 125L 125B 6PT 70D ROLLER,STAR 625D 125L 125B 12PT 55D ROLLER,STAR 650D 125L 125B 12PT 55D ROLLER,STAR 650D 125L 125B 12PT 70D ROLLER,STAR 650D 125L 125B 12PT 70D ROLLER,STAR 650D 275L 125B 6PT 45D ROLLER,STAR 650D 300L 125B 6PT 55D SPACERS FOR ELIMINATOR ROLLERS SPACER,RUBBER 250D 025L 125B SPACER,RUBBER 250D 025L 150B SPACER,RUBBER 250D 050L 125B SPACER,RUBBER 250D 050L 150B SPACER,RUBBER 250D 062L 125B SPACER,RUBBER 250D 062L 150B SPACER,RUBBER 250D 075L 125B SPACER,RUBBER 250D 075L 150B SPACER,RUBBER 250D 150L 125B SPACER,RUBBER 250D 150L 150B MISC FLAIL,RUBBER 4PT CLEANING SHAKER 3PT 75D ROLLER,CONE 75D *Most rubber molded parts are available in red urethane. Please inquire with sales for details. 4-12
Super-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B
T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex
Engineering Class Sprockets
Engineering Class Sprockets 28 Engineering Class Sprockets Renold Jeffrey replaceable sprockets and traction wheels are specially designed for the realities of high-stress, heavy-duty service. A variety
ROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data
Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading
Spartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
Mete-R-Matic F18 Top Dresser Starting Serial Number (U.S.A. Patent No. 5,307,952)
Last Version of the F - Has Different Pan Under Belt, Different Brush Shaft, Different Drive Roller and Shaft and has a Bolt On Side Guard. Note serial no range - manual before this starts at OPERATOR'S
CONTENTS. HT200/HTD Synchronous Belt Drives. Features/Benefits... PT11-2
CONTENTS HT200/HTD Synchronous Belt Drives V-Drives Features/Benefits.......................................... PT11-2 Specification HT TAPER-LOCK Sprockets................................ PT11-4 MPB &
C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT
To Order Call: 1-800-658-4568 11 C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT EXACT REPLACEMENT FOR 30 INCH CENTER DIVIDER
Section Content. Straight Curve Optional Equipment and Devices
Chain Driven Live Roller Conveyor Section Content Straight Curve Optional Equipment and Devices 31 CDLR Chain DRIVEN LIVE ROLLER CONVEYOR Why CDLR? Roller size and centers optimized to handle nearly any
4. TRANSMISSION 1. SAFETY 2. PREPARATION 3. FRAME 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT Monosem Inc.
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT TRANSMISSION 3-point Mounted, 7" x 7", and Stacking Toolbar Frame PLANTING RATE CHART 3pt
TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES
MODEL NO. 44220-60001 & UP FORM NO. 01-505-1741 Rev. A PARTS CATALOG TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES BASE & FRAME ASSEMBLY 1800-3 Part 1 92-4350 Frame - Topdresser 1 2 92-4364 Bracket
One Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Pickup Head Gear System (LH End View) Section 6 Model Years 1992 1998... 2-3 Model Years 1998 1999 (1 PUH Bearing)... 4-6 Model Years 1998 2012 (1 1/4 PUH Bearing)...
CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
Sync-Row for MONOSEM Twin-Row. Setting the Twin-Row Stagger INSURE THESE VALUES ARE CORRECT FOR YOUR TWIN ROW PLANTER
Sync-Row for MONOSEM Twin-Row TIMING CHART 30" ROW SPACING Chart for Adjustable Metering Sprocket INSURE THESE VALUES ARE CORRECT FOR YOUR TWIN ROW PLANTER Crop Corn Number of Seed Disk Cells (holes) 18
Chain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only.
ISO 9001 Registered Quality System Dixon, IL Plants Only Chain and Sprockets for the Steel Mill Industry Most Models Available in Carbon, Alloy and Stainless Steel www.alliedlocke.com ALLIEDLOCKE Metal
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features
ROLLERmANUAL Table of Contents What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features Applications Questions to Ask 2
MicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
CHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
Chain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
Feed Rolls 3940 and 3960 PTFH Upper Feed Rolls
Feed Rolls Upper Feed Rolls 12 3940 and 3960 PTFH 3940 and 3960 PTFH Feed Rolls 46 KEY PART NO. PART NAME QTY. SERIAL NO. 00 REMARKS 1 E52437 BUSHING 1 XX 2 34H353 SPRING PIN 1 X X 3/8" X 1-3/4" 3 24H1480
Maryland Metrics: How to order: Please prefix the P.T.I. part number or description with R305- example: R305-RAK201-8A Table of Contents.
Table of Contents Product.... Inside Cover General Overview.....2 Mounted Ball Bearings - Metric / Inch Ball Bearing Selection & Interchange......8 Pillow Blocks......14 Tapped Base......36 4-Bolt Flange
2AZ-FE ENGINE MECHANICAL
ENGINE 2Z-FE ENGINE MECHNICL EG-33 2Z-FE ENGINE MECHNICL ENGINE COVER The engine cover is made of nylon resin, and sound insulation material (urethane foam) is placed between the engine cover and the cylinder
Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts
14.0 INTRODUCTION Tray Box Former This section lists and illustrates the replaceable assemblies and parts of the Tray Box Former as manufactured by Each parts list contains the component parts for that
ROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076
Forged Chains & Sprockets
Forged Chains & Sprockets Telephone: 309-698-9250 5 a CROMANT chain company FORGED CHAINS & SPROCKETS Cobalt Chains forged alloy fork link chain provides an excellent solution for the rigors of heavy duty
One Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
Chain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
Cordweave Conveyor Belt
Cordweave Conveyor Belt Also known as Compound Balanced belting www.wirebelt.co.uk 2 Copyright 2015 Wire Belt Company Inc. Cordweave Conveyor Belt Also known as Compound Balanced belting Wire Belt Company
Design Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
Urethane. Ralphs-Pugh Urethane Products
Ralphs-Pugh Products elastomers are unique because they combine many of the advantages of rigid plastics, metals and ceramics with the elasticity of rubber. resists abrasion and reduces the affects of
Main Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
PLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076
Universal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown
Universal Platform 282 Model Section 5 Platform Parts Breakdown... 2-3 Retractable Finger Auger Parts Breakdown... 4-5 Combine Pickup Head Parts Breakdown... 6- Return to this page by clicking the upper
2. Lay bed sections on floor, upside down and in sequence, according to number with all arrows pointing in the same direction.
Assembly/Operating Instructions with Parts List Bulletin No. 481 MODEL PC December, 2000 (Supercedes April, 1998) RECOMMENDED SPARE PARTS LIST HIGHLIGHTED IN GRAY MODEL "PC" PARTS CONVEYOR PORTABLE OR
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 NC13-15-0008 RUBBER STRAP 12" LG 1 2 03-50-0070 FLEXIBLE HOSE HANDLE 1 3 NC01-65-0076 COLLAR (HAS116) 2 4 03-50-0005 GRILL (3 FINGERS) 1 5 01-33-0035
BEARING GUIDE. Bearing Guide Created by REV Robotics 2016, Licensed Under CC BY-SA 1
fg BEARING GUIDE This guide is intended as a reference on how to build with the new REV Robotics 15mm Building System using bearings and brackets to achieve basic motion. Bearing Guide Created by REV Robotics
Product Brochure. Dodge drive components
Product Brochure Dodge drive components 2 ABB Motors and Generators Dodge drive components We provide motors, generators and mechanical power transmission products, services and expertise to save energy
FMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
Instruction Sheet IS Date: 8/6/2013
Instruction Sheet Date: 8/6/2013 Bulletin #: Subject: 072709/072710/072711/072811, Belt Keeper Update Kit Purpose: To instruct Lastec personnel Model Numbers: 3300, 3600, 3380, 3680, 4520 Serial Numbers:
TURNOVER 10 X 13. Parts Manual
TURNOVER 10 X 13 Parts Manual TABLE OF CONTENTS I. TURNOVER / FRAME ASSEMBLY (FIG. 5-1) 4 A. INFEED ASSEMBLY (FIG. 5-2).8 B. DISCHARGE ASSEMBLY (FIG 5-3).10 C. MOTOR ASSEMBLY (FIG. 5-4) 12 D. DRIVE ASSEMBLY
Complete Component Catalog
Complete Component Catalog Valuepart for the Best in Quality Valuepart is committed to providing customers with the Highest Quality products available in the industry. Rigid Quality and Application standards
Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG
Model 960 Double Delivery and Triple Delivery HARVEST HEADERS PARTS CATALOG with Adapters for: Model 7000 Self-Propelled Windrower Model 9000 Self-Propelled Windrower John Deere 7720, 8820, 9500, 9600
Section VIII. Parts Lists and 3-D Drawings. EAF Conveyor - Assembled View
EAF Conveyor - Assembled View 54 EAF Conveyor - Dimensional Drawing 15.4" 7.4" BW+14.2" BW+9" 12.6" 22" Leg #1 A 15" Leg #2 4" BW+4.1" BW 3.4" Discharge Belt Height 4.2" Infeed Belt Height 1.5" 55 56 EAF
ROSTA RUBBER SUSPENSION UNITS. Multifunctional Modules for the Machine Industries. guiding tensioning absorbing ROSTA
RUBBER SUSPENSION UNITS Multifunctional Modules for the Machine Industries guiding tensioning absorbing Product Range Modules Rubber Suspension Unit Type DR-S Page 19 Housing made out of steel, inner square
Products Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
Harrow Option Item Part No. Description Item Part No. Description
Harrow Option Item Part No. Description 1 959288 Bolt Plate 2 334458 HHCS 1/2" x 6" Gr 5 330142 Lock washer ½" 330134 Hex nut ½" 3 959254 Harrow Arm Mount 4 151050 Bushing 5 336321 HHCS 5/8" x 2 1/4" Gr
style vision & miscellaneous miscellaneous section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
miscellaneous vision & style miscellaneous INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 311 miscellaneous No. 16377 No. 16858 Carb
LEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.)
LEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.) 1 23-55-0021 NYLON FLAIL BRUSH ROTOR COMPL. 1 2 23-25-2400 ROTOR SHAFT (48 7/8" LG) 1 3 23-22-1400 HAMMER SUPPORT 90 4 NC17-46-0020 NYLON HAMMER
Combine Pickup Heads
Combine Pickup Heads Torsion Combine Pickup Heads Section 6 30 ft. Torsion Combine Pickup Head... 2-5 24 ft. Torsion Combine Pickup Head... 6-9 Return to this page by clicking the upper right corner of
Blower Drive B-1 Section Contents. Page. Drive Belts B-2. Belt Length Chart B-3. Sprockets B-4. Sprockets B-5. Sprocket Sectional Views B-6
Blower Drive B-1 Section Contents Drive Belts Belt Length Chart Sprockets Sprockets Sprocket Sectional Views 14mm Overdrive Chart 8mm Overdrive Chart 8mm Overdrive Chart 11mm Overdrive Chart Idler Pulleys
Twin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)...
Threshing Cylinder Section 1 Threshing Cylinder (2006 2008)... 2-8 Threshing Cylinder (2009 Present)... 9-15 Return to this page by clicking the upper right corner of any page in this section. Revised
Base Kit Chain Drivetrain Build Guide
222fg Base Kit Chain Drivetrain Build Guide August 11, 2017 Chain Drivetrain Build Guide Copyright 2017 REV Robotics, LLC 1 1.1 Description This document outlines the steps required to four wheel, chain
L&T MANUFACTURING, INC.
100-9 Aluminum Cover Assembly 76.50 100-10 Aluminum Cover 64.75 100-11 Cover Gasket (Rubber) 2.85 100-11-1 Cover Gasket (Paper) 3.00 100-12-1 Lever Weight 1 Disc 1.60 100-12-3 Lever Weight 3 Disc 1.60
Double Master Plus Combine
Pickup Head Section 3 Pickup Head Straight Pull (2001 20)... 2-7 Pickup Head DMP SP2 (2006 2008)... 8-10 Pickup Head DMP SP2 (20 2014)... 11-13 Pickup Head DMP & DMP SP (2010 2014)... 14-16 Pickup Head
Drive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733
Drive End Bracket & Bearing #865089 1 06409700 1" Lock Collar 2 865733 Drive Bracket w/ Bearing 3 310037 End Drive Shaft Drive End Bracket #865733 1 03003100 Bearing 1" w/snap Ring 2 957795 Drive End Bracket
PULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS
PULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS PAGE 2 Table of Contents: Drive and Bore Adaptors..3 Clevis Adaptors.4 Shoulder Adaptors.5 Flat Idler Pulleys..6 Flat Idler Pulleys Continued
Model 104 Slider Belt Conveyor
Model 104 Slider Belt Conveyor Model Description: The Model 104 Slider Bed Belt is designed with the systems approach in mind. The square head and tail end terminals allow you the flexibility to combine
TT6101 Rotary Tedder
TT0 Rotary Tedder 0/0/0 Illustrated Parts Breakdown Page Chassis Assembly Page Page Transport Axle Assembly S/N - Transport Axle Assembly S/N + Page Page Page Page Page Transport Lock Assembly Lift Frame
SERIAL NUMBERS
J.E. LOVE COMPANY TREE SEEDLING HARVESTER SERIAL NUMBERS 103-114 FORESTRY PRODUCTS GROUP P.O. BOX 188 GARFIELD, WA 99130-0188 PHONE: (509) 635-1321 FAX: (509) 635-1434 Manufacturers of Special Harvesting
ROSTA Tensioner Devices
33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as
General Information. Assembly Instructions. Small Seeds Box and Rear Drive Assembly
Great Plains Mfg., Inc. Installation Instructions! 15P and 20P Series Drill Small Seeds Option and Walkboard Update Used with: 1510P and 1520P Drills 2010P and 2020P Drills When you see this symbol, the
Section B Detector September B
Section B Detector September 200 B Index No. Part No. Description. 2-0030-000 Link 2. 2-0208-000 Deck Hook Selector Assembly 3. 2-003-000 Spacer. -3000-000 Ball Bearing. 2-00-02 X-Washer Pin. 2-008-02
OPTIONAL EQUIPMENT. Section F INDEX
INDEX Section F OPTIONAL EQUIPMENT Description Page Inclined hopper, H08-/ and H-/... F2- Straight hopper, SWH...F Swivel arc kit, A...F Wheel kit, H08-, H- and H1-...F Inclined hopper, S08-/, S-/ and
ATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
Rexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
Roller Selection Flowchart
Selection Selection Flowchart Solus offers a line of conveyor rollers and components which are engineered to provide totally maintenance free service. These rollers are quiet, need no lubrication, are
Features / Benefits... PT5-2
CONTENTS Features / Benefits................................................... PT5-2 PT Component Specification........................................................ PT5-3 How To Order.......................................................
N S I D E T H I S G U I D E
GTC Manufacturing General Information and Installation Instructions, Release 3 February 2010 TC2 Torque Converter Asymmetrical System Superior Performance GTC Industries The TC2 is an asymmetrical torque
TT4101 Rotary Tedder
TT Rotary Tedder 0//0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Tongue Assembly S/N S/N - Tongue Assembly S/N + Main Frame S/N - Main Frame S/N to Main Frame S/N
ELEVATING UNDERCAR CONVEYOR 12" & 16" FLUSH - TYPE
ELEVATING UNDERCAR CONVEYOR 12" & 16" FLUSH - TYPE OWNER'S MANUAL 19013200 (10/97) Contents Introduction.................................... 1 Warnings...................................... 1 Statement
EUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
Can-Am. Mill Chain Sprockets. Can-Am Products visit us at
Can-Am Mill Chain Sprockets Can-Am Products visit us at www.can-amchains.com CAN-AM CHAINS CANADA CAN-AM CHAINS USA The origin of CAN-AM chain dates back to 1966, and a small machine shop in Richmond,
=-=-===~-~", Speedex. Owners and Parts Manual for. Model 1732
-------------=-=-===~-~", Speedex Owners and Parts Manual for Model 1732 FRONT END tem Description Part No. 1. 4 x 12 tire 0041-2412 2. 4 x 12 tube 0041-1412 3. 1/2 x 20 cone nut 0914-3500 4. 4x 12 rim
3500 Parts Catalog. 1996, A.B.Dick Company P/N (REV.0)
3500 Parts Catalog 1996, A.B.Dick Company P/N 177196 (REV.0) WARNING: THIS PARTS MANUAL IS INTENDED ONLY TO ASSIST QUALIFIED PERSONS IN IDENTIFYING SPECIFIC REPAIR PARTS. THIS PARTS MANUAL IS NOT A SERVICE
MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)
OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70
Universal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
Universal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
TT4100 Rotary Tedder
TT0 Rotary Tedder Serial numbers 0 and higher Illustrated Parts Breakdown Page Page Tongue Assembly S/N - Tongue Assembly S/N to Page Page Page Page Page Tongue Assembly S/N to Tongue Assembly S/N + Main
ONE COMPANY So Many Options RETIRING CAMS RETIRING CAMS - CAM POWER UNITS - RETIRING CAM CHAINS
ONE COMPANY So Many Options RETIRING CAMS RETIRING CAMS - CAM POWER UNITS - RETIRING CAM CHAINS Table of Contents Retiring Cams Retiring Cam Equipment Layouts Q Series Layout...3 P Series Layout...4 Dumbwaiter
Standard-Duty Low-Profile Conveyors - SLPC
Standard-Duty Low-Profile Conveyors - SLPC Requiring only 1 13 / 16 inch in clearance to the top of the belt, these rugged low-profile conveyors are built to withstand the punishment of even punch presses
560 and 680 Parts Manual
560 and 680 Parts Manual There have been four series of drive mechanism on the 560 &680 model Farm Aid TMR mixers. Series I has different front drive between the 680 and the 560. The drive in the rear
Models 642E, 642F, 662E, 644E, 664F, & 6A4E
Models E, F, E, E, F, & AE 0 0 0 0 Models E, F, E, E, F, & AE. -0 Lock Jam Nut /-. -0 Flat Idler. -B Auger Idler Arm. 0-0A Hex Cap Screw /- x.0. -0 Bushing. -0 Bell Washer. -00 Hex Nut /-. -0 Hex Lock
1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
Belt Conveyor Systems
Belt Conveyor Systems Product Manual 36 and 48 Widths Release 111114 i 11/2011 SECTION 1 OVERVIEW... 1-1 System Length... 1-1 Component Dimensions... 1-2 Calculating Floor Support Heights... 1-3 Recommended
FOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
Main features: All the Megablue product line is FDA/USDA/USDA Dairy Approved.
MEGABLUE Megablue Megablue is Megadyne s product, specifically created to give a good alternative to the classical plastic modular belt for the food processing industry. This product, with its smooth surface,
POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
Parts List Single Reduction Models, Cast Iron Units
Parts List Single Reduction Models, Cast Iron Units 60 51 51 10 24 11 11 9 24 12 19 17 27 31 8 23 7 14 20 28 26 5 1 2 6 44 60 50 23 7 6 30 27 30 4 3 30 13 29 14 22 18 27 43 48 50 8 15 16 12 25 9 51 51
ITR ELEVATING SCRAPER PARTS
ITR ELEVATING SCRAPER PARTS Make Caterpillar Series & Model 613 / 613B Remarks 1 Chain 9J0115 2 2 Flight Bolt 0S1603 128 2A Flight Nut 6B6684 128 2B Flight Washer 5P8245 128 3 Sprocket 9J1653 2 4 Sprocket
PIPELINE INJECTION PRODUCTS
PIPELINE INJECTION PRODUCTS DURABLE & RELIABLE SOLUTIONS PIPELINE INJECTION PUMP GP-10 & GP-1 SERIES Flows up to: 210 GPM / BPH / 7,20 BPD (nominal flow) BUSHINGS BACK PULL OUT SEAL HEAD DRIVER SHAFT DRIVEN
2-300 SERIES Endover Rotator Operator s Manual for Morse End-Over-End Drum Rotators Series
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 2 Operating Instructions....................
Product Bulletin SEB PCM and Product Reliability
Attn: Non-KONE Escalator Personnel File: KS-15-06 Date: 2015-04-06 Subject: Gearbox Inspection Instructions for E5000 Escalators Gearbox Inspection Instructions for E5000 Escalators Product Affected All
ATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
SECTION 6 PARTS LIST
SECTION FIGURE NO. DESCRIPTION PAGE NO. -1 - - -4-5 - - -8-9 Oven Panels, Window and Legs Exploded Drawing Air Finger Exploded Drawing Control Panel Exploded Drawing Blower and Shroud Exploded Drawing
Assembly Instructions. General Information. Installation Instructions. 12, 15 and 20 Series Drill Small Seeds Option. Used with:
Installation Instructions! Used with: 1200, 1210 and 1220 Drills 1500, 1510 and 1520 Drills 2000, 2010 and 2020 Drills 12, 15 and 20 Series Drill Small Seeds Option When you see this symbol, the subsequent
SPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic...
Index SECTION A SPECIALTY SPECIALTY PRODUCTS PRODUCT PAGE INDEX................................................................................... A-1 MTO SPECIALTY PRODUCTS................................................................