Reliable fuel effi cient engines. Energy effi cient compressor rotor design built to close engineering tolerances.

Transcription

1 Key Features Reliable fuel effi cient engines. Energy effi cient compressor rotor design built to close engineering tolerances. Effi ciency supported by progressive action of compressor air inlet valve and pneumatic engine speed controller, closely matching engine speed to air demand. Compressor drive over gearbox or directly. Rust resistant zinc coated canopy with durable powder paint fi nish. Individually replaceable canopy panels in the event of accidental damage. Flip top canopies supported by sturdy gas struts provide good access for maintenance. Flexible polyurethane mudguards for site durability.

2 Intelligent Air Technology Compressed air solutions for every application Compressors m 3 /min [ cfm] kw [1 350 bhp] Lubricated Rotary Vane Single Stage Screw Speed Regulated Screw Piston Complete Accessories Programme Filters and Dryers Cooling Systems Heat Recovery Condensate Management Air Receivers Multi-Set Controllers Lubricants Value Added Services Air Audit Performance Reporting Utility Air Performance Contracting Complete Service for Compressed Air Technology Engineering of Complete Compressor Stations Local Service Centres Guaranteed Parts Availability Portable Oil-Free Two Stage Screw Water-Sealed Screw Piston sales@compair.com CompAir policy is one of continuous improvement and we therefore reserve the right to alter specifications and prices without prior notice. All products are sold subject to the Company s conditions of sale. Brochure re-order ref: E 04/2006 DIN ISO 9001/ EN Certificate: 5168

3 C14 C30 Portable Air Compressors Intelligent Air Technology

4 Portable Air Compressors C14 C30 The perfect compressor range A wide range of single tool compressors to match exactly your air requirements. CompAir offers a single tool compressor to match the air consumption of the popular road breaker size in your construction market. The smallest is the C14, a compact manually transportable Honda petrol engined screw compressor to load into a van. This provide 1.4 m³/min [50 cfm] of air at a rated pressure of 7 bar g [100 psi]. The next compressor is C20, powered by a Kubota D 1105 water cooled diesel, and providing 2 m³/min [70 cfm] of air at a rated pressure of 7 bar g [100 psi]. C25 powered by a Kubota D1105 water cooled diesel, and providing 2.5 m³/min [90 cfm] of air at a rated pressure of 7 bar g [100 psi]. C30 powered by a Kubota V1505 water cooled diesel, and providing 3 m³/min [106 cfm] of air at a rated pressure of 7 bar g [100 psi]. Engine speed is adjusted automatically to ensure it is optimal for the air consumption, guaranteeing the most economical operation Versatility of the single tooler range is increased by provision of generator model C20 GS powered by a Kubota V1505 diesel, for site lighting, electrical tools or fusion welding polyethylene service pipe. Continuing investment in the latest design and manufacturing tools, and rigorous implementation of ISO 9001 approved quality systems ensure delivery of a reliable, high quality product. Whatever your choice, your energy effi cient, reliable CompAir compressor will be supplied as a user friendly, site durable package designed as a result of many years of close attention to the needs of construction contractors, public utility companies and the hire companies supplying them.

5 Features C14 Weight only 160 kg [353 lb]. Easy loading into a van or pick-up truck. Removable 20 l [4.4 gal] petrol tank further reduces transport weight. C14 portable compressor Compact dimensions, transport wheels and retractable Drawbar allows transport through doorways. Economical air-cooled Honda petrol engine. Standard hand and electric start. Separate air fi lters for engine and screw compressor ensure long fi lter life. C20 C30 Balanced start-up. The compressor has been equipped with a balanced start-up system i. e. when starting, the engine idles without air delivery. After a warming-up phase of approx. 60 sec, air delivery is starting by pressing a button on the control panel. C20 C30 Galvanised toolbox Tool tray to prevent loss and damage between sites. Easy to understand control panels. Keyless start to avoid downtime from lost keys. Control panel Inside battery main switch avoids unauthorised operation. Automatic Stop in case of low engine oil pressure, high engine and compressor temperature. This is shown on the control panel. Transparent plastic fuel tank Transparent plastic fuel tank for direct visual level and pollution checking. Tools oiler, 2.5 l [0.55 gal] capacity as an option, for the lubrication of hammer tools. Tools oiler A hinged hood

6 Technical Data Trade name C14 C20 C20 GS 4) C25 C30 C30 G 5) Operational data Volume fl ow m 3 /min [cfm] 1.4 [49] 2.0 [70] 2.0 [70] 2.5 [90] 3.0 [106] 3.0 [106] Operating pressure bar [psi g] 7.0 [100] 7.0 [100] 7.0 [100] 7.0 [100] 7.0 [100] 7.0 [100] Oil capacity compressor l [gal] 4.0 [0.8] 5.0 [1] 6.0 [1.3] 5.0 [1] 6.0 [1.3] 6.0 [1.3] Motor Honda GX 610 Kubota D 1105 Kubota V 1505 Kubota D 1105 Kubota V 1505 Kubota V 1505 Speed range at full load/of load rpm 2900/ / / / / /1800 Installed engine power kw [bhp] 13.2 [17.8] 16.7 [22.5] 22.7 [30.4] 19.4 [26.0] 22.7 [30.4] 22.7 [30.4] Fuel tank capacity l [gal] 20 [4.1] 40 [8.1] 40 [8.1] 40 [8.1] 40 [8.1] 40 [8.1] Generator Generator size with automatic idling kw [bhp] 6 kva 6 kva Generator Synchron Synchron Enclosure IP 54 IP 54 Safety measure Insulation control Insulation control Voltage V 110/ Frequency Hz Current generator 6 kva A 1-phase 32A 1-phase 32A Max. power at 230V/110 V kva 6 6 Sockets CEE 230 V 2 x CEE 16A 2 x CEE 16A Weights unbraked, adjustable towbar kg [lb] 160 [353] 1) 500 [1104] 575 [1267] 500 [1104] 525 [1156] 575 [1267] braked, adjustable towbar kg [lb] 575 [1267] 650 [1432] 580 [1276] 600 [1322] 650 [1432] unbraked, straight towbar kg [lb] 475 [1046] 550 [1211] 475 [1046] 500 [1104] 550 [1211] braked, straight towbar kg [lb] 550 [1211] 625 [1377] 555 [1222] 575 [1267] 625 [1377] Allowable total weight unbraked kg [lb] 500 [1104] 750 [1655] 500 [1104] 750 [1655] 750 [1655] Allowable total weight braked kg [lb] 750 [1655] 750 [1655] 750 [1655] 750 [1655] 750 [1655] Dimensions Length braked, adjustable towbar mm [in] [ ] unbraked, adjustable towbar mm [in] [ ] braked, straight towbar mm [in] 2925 [115.2] unbraked, straight towbar mm [in] 2885 [113.2] Length of canopy mm [in] 1010 [39.8] 1650 [65.0] Width mm [in] 700 [27.6] 1200 [47.2] Heigth mm [in] 630 [24.8] 1194 [47.0] Wheel track mm [in] 1022 [40.2] Ground clearance, minimum mm [in] 287 [11.3] Tyre size Standard 145 R13 Compressed air outlets 1 x 3/4'' 1 x 3/4'' 2 x 3/4'' 2 x 3/4'' 2 x 3/4'' 2 x 3/4'' Sound levels Power sound level 2) db(a) Lwa Pressure sound level acc. to AVV db(a) Lwa Pressure sound level, PNEUROP at 1 m db(a) Lwa Pressure sound level, PNEUROP at 7 m 3) db(a) Lwa ) Transport weight without fuel tank 142 kg [353 lb] 2) Sound power to 2000/14 / EC 3) Sound pressure to PNEUROP PN8NTC2.2 at 7 m 4) Volume fl ow 2 m³/min [70 cfm] and max. generator power 5) Max. generator power and volume fl ow 2 ³/min [70 cfm] Options Add on lubricator ensures that tools are always in top condition Built-in Lubricator ensures that tools are always in top condition Compressor oil temperature regulating valve ensures safe operation of compressor at low ambient temperatures. Prevents compressed air tools from freezing Integrated aftercooler with automatic condensate separation and with / without downstream compressed air re-heating Aftercooler together with ultra-fine filters guarantees compressed air quality acc. to German standard ZTV-SIB 90 Built-in generators to provide site electricity for night time operations and electrical tools C 20 GS has a generator power 6 KVA and simultaneous volume fl ow 2 m³/min [70 cfm] C 30 has a generator power 6 KVA and simultaneous volume fl ow 2 m³/min [70 cfm] Hose reel with 20 m [66 ft] 3/4"-hose offers material protection and comfortable transport Base mount for mounting on trucks Skid mount for stationary site installation Various chassis versions braked and unbraked towbar Integrated non-return valve for compound operation of several compressors Variety of towing eyes NATO [3 in], 40 mm DIN [1.5 in], 50 mm ball head [2 in] etc. for passenger cars and trucks Catch pan for fluids for use in water protection area Customer paint finish Exhaust Spark Arrestor To reduce fire risk during operation in hazardous areas such as petro-chemical plants and forests C14 C20, C20 GS, C25, C30