Product Data Sheets. Effective: December 18, Summit Industrial Products

Size: px
Start display at page:

Download "Product Data Sheets. Effective: December 18, Summit Industrial Products"

Transcription

1 s Effective: December 18, 2013 Summit Industrial Products 9010 CR 2120 ~ Tyler, TX P.O. Box ~ Tyler, TX Phone: Toll Free: ~ Fax: info@klsummit.com

2 May 13, 2002 P.O. Box Tyler, Texas 75713, Phone Fax varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of May 13, ALIMEX A WATER SCALE SOLVENT SAFE FOR ALUMINUM Alimex is a water-based chemical formulated to safely clean lime scale and corrosion from water-wetted surfaces. It contains wetting agents, corrosion inhibitors and degreasing compounds to help penetrate and carry away the scale and corrosion. This product is specifically designed to be used on equipment that contains aluminum that cannot be safely cleaned with other scale removing compounds. When used as directed, Alimex is non-corrosive and will not affect the following metals: aluminum, stainless steel, carbon steel, brass, admiralty metal, copper, iron, lead, PVC plastic, polyethylene, rubber, leather, and most other materials found in waterwetted equipment. Alimex is not recommended for zinc, galvanized steel, or alloys of magnesium. This product is non-toxic, non-corrosive, and non-flammable when used as directed. It is biodegradable and can be safely put to the sewer in the spent condition. Alimex has a built-in indicator which changes color when the solution is 95+ percent spent. When the solution begins to turn blue, it should be added to or changed if the equipment is not clean. DIRECTIONS Alimex is designed to be used at ambient temperatures above 35ºF. It is most effective when circulated through the equipment to be cleaned. When possible, circulation should be up-flow. Alimex can also be used by filling the equipment to be cleaned and allowing it to set until the scale disappears. When cleaning exposed surfaces (such as fin fan coolers), Alimex should be periodically sprayed on the surface until the scale disappears. In all cases, fresh water should be used to rinse the clean surface free of Alimex. The cleaning operation normally takes two to six hours. The equipment should be vented at all times since carbon dioxide (CO 2 ) gas evolves during the disassociation of lime scale. When the cleaning process is complete, the system should be completely drained and flushed with fresh water. PHYSICAL PROPERTIES WATER SCALE SOLVENT Specific Gravity Freezing Point 28.4ºF Boiling Point 208ºF Flash Point None Temperature of Reaction Negligible Recommended operating pressure is atmospheric and recommended operating temperature range is: Minimum 40ºF Optimum 80ºF Maximum 140ºF Page 1 of 2

3 METHOD OF APPLICATION Alimex solution is most effectively used by circulating it through the equipment to be cleaned. When possible, circulation should be up flow. The equipment should be vented at all times since carbon dioxide (CO 2 ) gas is liberated from the disassociation of the lime scale. ALIMEX PUMP AND HOSE HOOK-UP Page 2 of 2

4 SYNTHETIC BARRIER FLUIDS September 5, 2012 P.O. Box Tyler, Texas 75713, Phone Fax varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. BARRIER FLUID E Summit Barrier Fluid E is formulated from the highest quality synthetic base stocks and fortified with additives to provide a non-reactive, oxidatively stable fluid for seal service over an extremely wide temperature range. This fluid has an excellent low temperature fluidity and high temperature stability property as well as the ability to efficiently transfer heat, and keep the seal face cool. Summit Barrier Fluid E does not contain components that are known catalyst poisons, and are compatible with most commonly used seal materials This lubricant is NSF Registered and meets USDA 1998 (H1) guidelines (lubricants with incidental food contact) for use in food plants. Summit is an ISO certified facility. Do not add directly to food. BARRIER 40 C, cst 100 C, cst 5.9 Specific Gravity Flash Point, ºF (ºC) 455 (235) Pour Point, ºF (ºC) -78 (-61) Copper Strip Corrosion E 1A Emulsion Tendency 40/40/0 (10) NSF Registered ISO Kosher Halal H1 Yes Yes Yes CFIA Yes Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the product should be recertified prior to use.

5 SYNTHETIC BARRIER FLUIDS September 5, 2012 P.O. Box Tyler, Texas 75713, Phone Fax varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. BARRIER FLUID SERIES Summit Barrier Fluid Series lubricants are formulated from the highest quality synthetic base stocks and fortified with additives to provide a non-reactive, oxidatively stable fluid for seal service over an extremely wide temperature range. These fluids have excellent low temperature fluidity and high temperature stability properties as well as the ability to efficiently transfer heat, and keep the seal face cool. Summit s Barrier Fluid Series lubricants do not contain components that are known catalyst poisons, and are compatible with most commonly used seal materials. Barrier Fluid 5 is environmentally safe and readily biodegradable according to OECD 301B. Barrier Fluid Series products are NSF Registered and meet USDA 1998 (H1) guidelines (lubricants with incidental food contact) for use in food plants. Do not add directly to food. Summit is an ISO certified facility. BARRIER FLUIDS C, cst C, cst Pour Point, ºF (ºC) -103(-75) -99(-73) -78(-61) -42(-41) -71(-57) Flash Point, ºF (ºC) 305(152) 425(219) 460(238) 495(257) 510(266) Specific Gravity Copper Strip Corrosion 1A 1A 1A 1A 1A Emulsion Tendency 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 (10) (10) (10) (10) (10) NSF Registered H1 H1 H1 H1 H1 ISO Yes Pending Pending Pending Pending Kosher Yes Yes Yes Yes Yes Halal Yes Yes Yes Yes Yes CFIA Yes Yes Yes Yes Yes Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the product should be recertified prior to use.

6 August 6, 2013 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. PUMP/VACUUM PUMP CentriPump PPO Series Summit CentriPump PPO Series lubricants are a blend of premium synthetic and petroleum base fluids specially designed for centrifugal pump applications. The CentriPump PPO Series offers superior rust and corrosion properties, oxidation life and anti-wear protection. They are exceptional at controlling sludge and deposits which results in lower operating temperatures and extended oil drain intervals. CentriPump PPO Series lubricants are compatible with commonly used seal and gasket materials. PRODUCTS PPO-32 PPO-46 PPO-68 PPO-100 ISO Grade C, cst C, cst F, SUS F, SUS Index Flash Point, F ( C) 450(232) 470(243) 485(252) 515(268) Pour Point, F ( C) -35(-37) -36(-38) -29(-34) -31(-35) Emulsion Tendency 40/40/0 40/40/0 40/40/0 40/40/0 (10 mins) (15 mins) (15 mins) (15 mins) RPVOT, Avg. Min Four Ball Wear Test, Mm 1200 rpm,167 F, 40 kg

7 August 6, 2013 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. PUMP/VACUUM PUMP CentriPump SPO Series Summit CentriPump SPO Series lubricants are manufactured from the highest quality PAO (polyalphaolefin) base stocks and advanced additive technology. CentriPump SPO Series lubricants are recommended for centrifugal pumps and present many advantages over petroleum-based lubricants as well as other popular synthetic based products. The CentriPump SPO Series offers superior oxidation life and excellent wear protection. In addition, they have low pour points, high viscosity indices and excellent water demulsibility. CentriPump SPO Series lubricants are compatible with commonly used seal materials and equipment designed for use with petroleum oils. PRODUCTS SPO-32 SPO-46 SPO-68 SPO-100 ISO Grade C, cst C, cst F, SUS F, SUS Index Flash Point, F ( C) 505(263) 525(273) 515(268) 540(282) Pour Point, F ( C) -60(-51) -40(-40) -44(-42) -45(-43) Emulsion Tendency 40/40/0 40/40/0 40/40/0 40/40/0 (10 mins) (10 mins) (15 mins) (10 mins) RPVOT, Avg. Min Four Ball Wear Test, Mm 1200 rpm,167 F, 40 kg

8 May 13, 2002 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. PREMIUM SYNTHETIC BLEND OVEN CONVEYOR CO-150 Tenter Chain Oil Summit CO-150 chain oil is a unique blend of the highest quality petroleum oil available today and selected synthetic base stocks. This blend contains an additive system formulated to meet the demanding requirements for a tenter chain lubricant. The formulation of Summit CO-150 incorporates an additive system that provides the following benefits to tenter chains: 1. Excellent anti-wear properties to prolong chain life 2. A viscosity for spraying the lubricant onto the chain 3. High temperature capabilities 4. Cleaning of the chain as it operates 5. Anti-oxidants to reduce gumming and thickening 6. Water insoluble 7. Adheres to the chain 8. Penetration Characteristic Typical 100 F, cst 210 F, cst 100 F, SUS 210 F, SUS 72.5 Index 132 Flash Point, F (ºC) 475 (246) Fire Point, F (ºC) 515 (268) Pour Point, F (ºC) -10 (-23)

9 SYNTHETIC OVEN CONVEYOR CHAIN LUBRICANT November 4, 2010 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. CO-250 High Temp Chain Oil Summit CO-250 was specifically developed for high temperature roller chains operating at temperatures in excess of 200ºC. CO-250 should be used for the chains, steel belts and heated press platens found in continuous particle board and wood laminate machinery. FEATURE Special synthetic base oil High temperature stability Low evaporation rate High wear protection Good spreadability Characteristic BENEFIT Prevents residue build-up. Offers effective lubrication at high temperatures. Minimizes oil consumption. Increases chain life. Enables oil to penetrate extremely narrow gaps at the lubrication point. Typical Performance Base Oil Ester Color Yellow-orange, transparent Specific Gravity 20 C Refractive Index Service Temp. Range, C -30 to 250 Flash Point, ºF ( C) 446 (230) Pour Point, ºF ( C) -31 (-35) 20 C, cst 40 C, cst 100 C, cst 30 Index 150 Evaporation Loss 1 K/min, (% weight loss) 120 C C C C 10.9 Four Ball Test Machine welding load, (N) 2400 wear scar 1 hour at 150 N, (mm) hour at 400 N, (mm) 0.3 NSF Registered H2 METHOD OF APPLICATION: Automatic lubrication systems are recommended.

10 October 14, 2010 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. SYNTHETIC BLEND OVEN CONVEYOR CHAIN OIL CO-400 High Temp Chain Oil Summit CO-400 High Temperature Chain Oil is a unique formulation of special ester base stocks and the latest additive technology. CO-400 has an exceptionally high smoke point and is capable of penetrating and removing carbonaceous deposits and inhibiting the formation of solid buildup. It is effective over a broad temperature range and results in lower power consumption under varying load conditions. APPLICATIONS: Summit CO-400 High Temperature Chain Oil is recommended for use in the following applications: High Temperature Process Ovens Drying Operations Can and Fibre Board Lines Glass Fibre Ovens Extrusion Paint Lines Multi-Purpose E.P. Gears Tenter Frames Open Bearings and many other Roller Chain Operations requiring a lubricant with excellent heat stability Characteristic Typical Performance ISO Grade 100 F, cst 210ºF, cst 100 F, SUS 210ºF, SUS Index 150 Pour Point, F (ºC) -60 (-51) Flash Point, F (ºC) 575 (302) Specific Gravity Density, lbs/gal 7.59 NSF Registered H2

11 SYNTHETIC OVEN CONVEYOR CHAIN LUBRICANT November 4, 2010 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. CO-95 High Temp Chain Oil Summit CO-95 High Temperature Chain Lubricant was developed specifically for the conveyor chains used in fiberglass, rockwool, and gypsum ovens. It is a proven quality high temperature roller chain lubricant. Feature Synthetic oil High temperature stability Low evaporation rate High wear protection High flash point Characteristic Benefit Prevents residue build-up. Offers effective lubrication at high temperatures. Reduced lubricant consumption. Increased chain life. Reduces oven fire likelihood. Typical Performance Base Oil Ester Color Light Brown, Clear Specific Gravity 0.95 Service Temp. Range, ( F) 32( F) - 480( F) Flash Point, F (ºC) >536 (280) Pour Point, F (ºC) -31 (-34) 20 C, cst 40 C, cst 100 C, cst 12 Index 118 EVAPORATION LOSS 1 K/min, (% weight loss) 120 C C C C C C C C 13.1 NSF Registered H2 Method of Application:Automatic lubrication systems are recommended.

12 SYNTHETIC COMPRESSOR January 27, 2011 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of January 27, DSL -100S Summit DSL -100S is formulated from diester base stocks and employs state-of-the-art additive technology to provide an outstanding lubricant for high pressure compressors. Summit DSL -100S is an excellent lubricant for the following applications: High pressure Seismic compressors Reciprocating compressor cylinders Low and High temperature lubrication General lubrication Summit DSL -100S can be used as a flushing oil where the compressor needs to be flushed while running under load. It does not contain polymers commonly used as thickeners in ester based oils. 40 C, cst 100 C, cst 100 F, SUS 210 F, SUS 54.9 Index 55 Pour Point, F ( C) -29 (-33) Flash Point, F ( C) 444 (229) Autoignition Point, F ( C) 790 (421) Copper Corrosion PRODUCT DSL -100S 1A SPECIAL NOTE: Summit DSL lubricants are not compatible with almost all elastomers used in compressors and pumps including the paint used in crankcases. Consult the Material Compatibility Guide for specific recommendations.

13 SYNTHETIC AIR COMPRESSOR October 13, 2010 Note: The information in this publication is the result of careful testing in our laboratories, complemented by selected literature. It does not in any way constitute a guarantee, nor does it serve as a license to operate any patent. Due to widely varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of June 19, DSL Summit DSL is formulated from the best diester base stocks available and employs state-of-the-art additive technology to provide an outstanding lubricant Summit DSL is an excellent lubricant for the following applications: Reciprocating compressor cylinders Low and High temperature lubrication General lubrication ISO Grade C, cst 100 C, cst 100 F, SUS 210 F, SUS Index 131 Specific Gravity Density lbs/gal Pour Point, F ( C) -38 (-39) Flash Point, F ( C) 510 (266) Autoignition Point, F ( C) 790 (421) Copper Corrosion PRODUCTS DSL A Special Note: Summit DSl 1220 lubricant is not compatible with some elastomers used in compressors and pumps including some paint used in crankcases. Consult the Material Compatibility Guide for specific recommendations.

14 DSL SYNTHETIC AIR COMPRESSOR SERIES Lubricants Summit DSL synthetic lubricants are unique combinations of quality diester base stocks and the latest additive technology. Summit provides a wide range of DSL lubricants that cover applications for rotary vane, rotary screw, and all ages and design types of reciprocating compressors. Summit DSL lubricants are especially noted for the following benefits: Low temperature fluidity Better thermal conductivity-reduces operating temperature Reduced friction approximately 20% lower coefficient of friction. High temperature thermal stability will not disassociate under thermal stress. Greater resistance to mechanical stress will not shear under heavy loads or extreme stress. Reduced metal-to-metal wear-polar properties provided better metal wetting Better demulsibility characteristics-moisture separates readily, providing better rust and corrosion protection. More energy efficiency. These lubricants are designed for use in the crankcase and as a cylinder lubricant. They are compatible with almost all elastomers used in compressors and pumps, including paint used in crankcases. COMPATIBILITY: The following materials are compatible for use with DSL lubricants: Epoxy Paint, Celcon, Viton, High Nitrile Rubber (Buna N, NBR-greater than 36% Acrylonitrile), Medium Nitrile Rubber (Buna N, NBR 30-36% Acrylonitrile), Teflon, Oil Resistant Alkyd, and Nylon. Summit DSL -100 is recommended for use in the following applications: Reciprocating compressors Rotary vane compressors Ball and roller bearings Low temperature lubrication High temperature lubrication General lubrication for applications requiring an ISO 100 lubricant Summit DSL -125 and DSL -150 are recommended for the following applications: Reciprocating compressors Rotary vane compressors Ball and roller bearings Low temperature lubrication High temperature lubrication General lubrication for applications requiring an ISO 150 lubricant Summit DSL -32 is recommended for use in the following applications: Centrifugal Compressors Certain rotary screw & vane compressors Low temperature lubrication High temperature lubrication General lubrication for applications requiring an ISO 32 lubricant Summit DSL -68 is recommended for use in the following applications: Rotary screw and vane compressors Ball and roller bearings Low temperature lubrication High temperature lubrication Mist lubrication systems General lubrication for applications requiring an ISO 68 lubricant Page 1 of 2

15 SYNTHETIC AIR COMPRESSOR June P.O. Box Tyler, Texas 75713, Phone Fax varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of June 28, DSL SERIES (Diester) SPECIAL NOTE: Summit DSL lubricants are not compatible with some elastomers used in compressors and pumps including some paint used in crankcases. Consult the Material Compatibility Guide for specific recommendations. DSL SERIES (Diester) PRODUCTS DSL -32 DSL -46 DSL -68 DSL -100 DSL -125 DSL -150 ISO Grade C, cst C, cst Index Specific Gravity Density lbs/gal Pour Point, F( C) -65 (-54) -65 (-54) -40 (-40) -30 (-34) -38 (-39) -30 (-34) Flash Point, F( C) 490 (254) 475 (246) 490 (254) 495 (257) 495 (257) 505 (263) Autoignition Point, F( C) 765 (407) 720 (373) 765 (407) 780 (416) 785 (418) 785 (418) Copper Corrosion 1A 1A 1A 1A 1A 1A *DSL 125 falls between the ISO-100 and ISO 150 viscosity range. DSL 1220 Available upon request

16 SYNTHETIC PROCESS GAS COMPRESSOR December 3, 2013 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. DSL -XM Series Summit DSL -XM Series products are formulated from the best diester base stocks available and employ state of the art additive technology to provide outstanding lubricants. DSL -100XM and DSL -125XM are approved by U.O.P. for hydrogen compressor service associated with their catalytic processes. Please consult your Summit distributor for additional information. Summit DSL -XM Series lubricants are recommended for use in the following applications: reciprocating compressors, rotary screw compressors, vane compressors, air tools, ball and roller bearings, mist, and low temperature lubrication. PRODUCTS DSL -100XM DSL -125XM ISO Grade C, cst C, cst F, SUS F, SUS Index Specific Gravity Density lbs/gal Pour Point, F ( C) -30 (-34) -38 (-39) Flash Point, F ( C) 495 (257)) 495 (257) Autoignition Point, F( C) 780 (416) 785 (418) Copper Corrosion 1A 1A SPECIAL NOTE: Summit DSL lubricants are not compatible with most elastomers used in compressors and pumps including the paint used in crankcases. Consult the Material Compatibility Guide for specific recommendations.

17 BIODEGRADABLE TRACTOR HYDRAULIC OIL November 14, 2007 P.O. Box Tyler, Texas 75713, Phone Fax varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of November 14, ENVIROTECH ALL-TRAC EnviroTech All-Trac is an environmentally responsible universal lubricant for farm equipment, off-highway machinery, and industrial tractors. This multifunctional biobased fluid is designed for equipment requiring one lubricant for the transmission, final drive, wet brakes and hydraulic systems. It meets or exceeds the performance requirements of all major brands of farm tractors and other farm equipment that utilize a common fluid reservoir. EnviroTech All-Trac is formulated with special friction modifiers to ensure proper operation of wet brakes and transmission clutch packs. The vegetable based formulation provides superior oxidation resistance, excellent wear protection, protects against rust and corrosion, and has exceptional anti-foam characteristics. EnviroTech All-Trac meets or exceeds the requirements for ATD Allison C-4, Caterpillar TO-2 and is recommended for use where the equipment manufacturer specifies the following: CASE INTERNATIONAL JIC-145/MS-1210 JIC-185/MS-1204 MS-1205, MS-1127, MS1129-A, M1135, M1141 DEUTZ-ALLIS FIAT-HESSTON FORD M2C134-D M2C86-C, M2C86-B ENVIROTECH FORD M2C41-B, M2C48-B M2C53-A, M2C134-A M2C134-B, M2C134-C JOHN DEERE J20C, J14A Quatrol J20D Hygard KUBOTA LANDINI MASSEY-FERGUSON MS-1205, MS-1127, MS1129-A, M1135, M1141 STEIGER FORD VERSATILE WHITE FARM Q-1826 Q-1705, Q-1766, Q-1802 Classified as ultimately biodegradable (Pw1) and non-toxic, EnviroTech All-Trac is ideal for equipment operating in environmentally sensitive areas. C, cst C, cst C C 11,150 Index 210 Flash Point, F, ( C) 484 (251) Stable Pour Point, F, ( C) -38 (-39) Biodegradation Classification, ASTM D 5864 ultimate PW1

18 BIOBASED HIGH TEMP CHAIN LUBRICANT November 3, 2009 P.O. Box Tyler, Texas 75713, Phone Fax varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of November 3, ENVIROTECH CO FG Series EnviroTech CO FG Series chain lubricants are a specially developed, food grade chain lubricants blended from biobased oils and fortified with synthetic food grade white graphite. This unique high temperature formula lubricates at operating temperatures exceeding 1000ºC and meets U.S.D.A (H1) guidelines for applications where incidental food contact is possible. It does not contain VOCs and will out-perform other lubricants containing molybdenum disulfide, black graphite, or Teflon. In addition, EnviroTech CO FG contains a natural self-cleaning property which cleans the buildup on chains attributable to the use of inferior chain lubricants. This superior chain lubricant provides excellent protection against wear, rust, oxidation, and corrosion. APPLICATIONS: Use EnviroTech CO FG Series for chains exposed to high service temperatures which exceed those recommended for conventional lubricants. This product is ideal for oven chains used in plants which produce bread, cookies, cakes and other baked food products. It is also suitable for can making where decorative coatings are being cured or applied. EnviroTech CO FG can also be used in non-food grade high temperature applications. EnviroTech CO-68 FG CO-150 FG ISO Grade (ASTM cst Index (ASTM D-2270) Flash Point (ASTM D-92) 590ºF/310ºC 595ºF/313ºC Fire Point (ASTM D-92) 635ºF/ 335ºC 640ºF/ 338ºC Pour Point (ASTM D-97) -18.4ºF/-28ºC -13ºF/-25ºC Rust Prevention (ASTM D-665) Pass Pass 4 Ball Wear (ASTM D-2266) Ball Weld (ASTM D-2783) 160 kg 160 kg NSF Registered H1 H1 SPECIAL INSTRUCTIONS: Because of the high concentration of white graphite in this chain oil, it needs agitation before use to insure even distribution of the solid lubricant. The white graphite has proven to stay in suspension for up to two weeks after being introduced into a capillary tube supplying lubricant to an applicator. Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the product should be recertified prior to use.

19 BIODEGRADABLE EP GEAR LUBRICANT May 6, 2009 P.O. Box Tyler, Texas 75713, Phone Fax varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of May 6, ENVIROTECH EP GEAR OIL SERIES EnviroTech EP Gear Oils are environmentally responsible lubricants designed for the protection of gears and bearings in systems where high temperature and/or extreme pressure conditions exist. It is a vegetable based formulation recommended for lubricating spur, helical, bevel, and worm gear configurations. These biobased lubricants are intended for heavy-duty applications subject to heavy loading or shock loading. EnviroTech EP Gear Oils meet or exceed the following performance requirements: U.S. Steel 224 AGMA 9005/ DIN 51517, Part 3 David Brown DB S Cincinnati Machine E.P. Classified as ultimately biodegradable (Pw1) and non-toxic, EnviroTech EP Gear Oils are ideal for equipment operating in environmentally sensitive areas. EnviroTech EP-150 EP-220 EP-320 EP-460 ISO Grade, Approximate AGMA #, Approximate 4 EP 5 EP 6 EP 7 EP Specific Gravity C, cst C, cst Index Pour Point F( C) -8(-22) -4(-20) 0(-18) 10(-12) Flash Point F( C) (550) (280) 536(280) 536(280) Copper Corrosion 1A 1A 1A 1A Rust Test Pass Pass Pass Pass Timken OK, lbs Four-Ball Wear Four-Ball EP Weld Point (kg) Four-Ball EP Load Wear Index FZG Test Biodegradation Classification, ultimate ultimate inherent inherent ASTM D 5864 PW1 PW1

20 November 24, 2010 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of November 24, BIODEGRADABLE FOOD GRADE PENETRATING OIL ENVIROTECH FGPL Summit EnviroTech FGPL is a biobased food grade penetrating lubricant formulated for use in the food processing industry. This biodegradable formulation is odorless and tasteless. It is fast acting and rapidly penetrates corrosion or carbon residue on equipment. It is suitable for use on all metals and alloys. Summit FGPL can be used on food processing equipment as a protective anti rust film, as a release agent on gaskets or seals of tank closures and as a lubricant for machine parts in locations where the potential for exposure to food exists. EnviroTech FGPL Specific 14 Pour Point, ºF(ºC) -13 (-25) Flash Point, ºF(ºC) 295 (146) Copper Corrosion Prevention 1A Rust Prevention Distilled Water Pass-Clean Synthetic Sea Water Pass-Clean Four Ball Wear.40 mm NSF Registered H1 Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the product should be recertified prior to use.

21 November 16, 2010 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of November 16, BIODEGRADABLE HYDRAULIC OIL EnviroTech H Series EnviroTech hydraulic oils are premium environmentally responsible hydraulic fluids designed to provide exceptional performance in hydraulic and circulation systems. These vegetable based formulations have been engineered to meet or exceed the performance requirements of most hydraulic pump and system manufacturers, while satisfying the rigorous criteria for biodegradability and toxicity. They offer the anti-wear and film strength characteristics necessary for hydraulic systems operating under high load and high pressure. EnviroTech hydraulic oils are inhibited for excellent protection against rust and corrosion. In addition to their excellent performance capability, EnviroTech hydraulic oils satisfy the requirements for ultimate biodegradability and non-toxicity making them an excellent choice for hydraulic and circulation systems operating in environmentally sensitive areas. Base oils and additives in these products pass and exceed the acute toxicity (LC-50) criteria adopted by the U.S. Fish and Wildlife Service and the U.S. EPA. EnviroTech meets the definition of a biobased lubricant as outlined in section 9001 of The Farm Security and Rural Investment Act (FSRIA) of 2002 (Public Law / HR 2642) and qualifies for preferred procurement by U.S. Federal Agencies as set forth in FSRIA section 9002 EnviroTech H-32 H-46 H-68 ISO Grade Specific Gravity C, cst C, cst Index Flash Point, F ( C) 460 (238) 470 (243) 485 (252) Fire Point, F ( C) 505 (263) 510 (266) 520 (271) Pour Point, F ( C) -40 (-40) -35 (-37) -30 (-34) FZG Gear Test, DIN Ball Wear, ASTM D 4172, mm Biodegradadation ultimate ultimate ultimate Classification, ASTM D 5864 PW1 PW1 PW1 Emulsion Tendency 40/40/0 40/40/0 40/40/0 ASTM D1401 (10) (10) (10) EnviroTech H Series lubricants do not produce an iridescent appearance (sheen) on the surface of the water when tested in accordance with the U.S. Coast Guard Static Sheen Test.

22 January 4, 2005 P.O. Box Tyler, Texas 75713, Phone Fax varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of January 4, 2005 SYNTHETIC AIR COMPRESSOR FF SERIES Summit FF Series lubricants are formulated from the best diester base stocks available and employs state-of-the-art additive technology to provide outstanding high temperature performance in reciprocating air compressors. FF-100 and FF-150 are excellent lubricants for the following applications: Reciprocating compressor cylinders used in fire flood operations and other environments sensitive to combustion. Low and High temperature lubrication General lubrication PRODUCTS FF-100 FF-150 ISO Grade Density lbs/gal C, cst C, cst F, SUS F, SUS Index Rust - D665 B Pass Pass Flash Point, F( C) 520(271) 520(271) Autoignition Point, F( C) > 800(427) > 800(427) Copper Corrosion - D130 1A 1A SPECIAL NOTE: Summit FF Series lubricants are not compatible with some elastomers used in compressors and pumps including some paint used in crankcases. Consult the Materials Compatibility Guide for specific recommendations.

23 SYNTHETIC AIR COMPRESSOR April 10, 2013 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. FG ELITE SERIES (FOOD GRADE) Summit FG Elite Series lubricants are specially designed for rotary screw, vane and reciprocating air compressors used in the food service industry. These lubricants use 100% multisynthetic base oils in combination with performance driven additives to offer extended lubricant life. Field tests have shown these lubricants will last between 8,000 and 10,000 hours depending on operating conditions. In addition, this innovative chemistry offers increased solvency, which significantly reduces deposit and sludge formation. Summit FG Elite Series lubricants offer superior protection against rust, wear and corrosion. Summit FG Elite Series lubricants meet USDA 1998 (H1) guidelines (lubricants with incidental food contact) and are manufactured in an ISO certified facility. FG Elite Series lubricants have the same software compatibility as Summit SH Series lubricants. FG Elite Series ISO Grade C, cst C, cst Index Flash Point, ºF (ºC) 460(238) 505(263) 500(260) 510(266) 530(277) Pour Point, ºF (ºC) -74(-59) -40(-40) -42(-41) -44(-42) -51(-46) 4-Ball Wear (mm scar) Water Separation 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 (ml oil/ml water/ml emulsion) (10) (10) (10) (10) (10) Rust Pass Pass Pass Pass Pass Copper Corrosion 1A 1A 1A 1A 1A NSF Registered H1 H1 H1 H1 H1 ISO Pending Pending Pending Pending Pending Kosher Approved Yes Yes Yes Yes Yes Halal Certified Yes Yes Yes Yes Yes CFIA Accepted Yes Yes Yes Yes Yes FG Elite-32 is designed for use in rotary screw compressors and applications requiring an ISO-32 lubricant. FG Elite-46 & FG Elite-68 are designed for use in rotary screw compressors and other applications requiring an ISO-46 or ISO-68 lubricant. FG Elite-100 is designed for use in reciprocating compressors and other applications requiring an ISO-100 lubricant. FG Elite-150 is designed for general lubrication and reciprocating compressors requiring an ISO-150 lubricant. Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the product should be recertified prior to use.

24 SYNTHETIC AIR COMPRESSOR March 9, 2012 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. FG SERIES (FOOD GRADE) The Summit FG Series lubricants are specially designed for rotary screw, vane and reciprocating compressors being used in the food service industry. These fully synthetic lubricants are NSF Registered and meet USDA 1998 (H1) guidelines (lubricants with incidental food contact). Summit FG Series lubricants are Kosher/Halal certified and CFIA accepted. Summit is an ISO certified facility. The FG Series lubricants are formulated from the highest quality synthesized hydrocarbon fluids available. The special additive system is blended with the synthetic base-fluid to provide extended lubricant life and to protect against wear, rust and corrosion. FG Series lubricants have the same software compatibility as Summit SH Series lubricants. FG SERIES FG-100 FG-200 FG-250 FG-300 FG-500 ISO Grade C, cst C, cst F, SUS F, SUS Index Specific Gravity Density lbs/gal Flash Point, ºF (ºC) 490(254) 530(277) 510(266) 535(279) 515(268) Pour Point, ºF (ºC) -60(-51) -71(-57) -65(-54) -60(-51) -40(-40) Autoignition Point, ºF (ºC) 730(388) 745(396) 750(399) 760(404) 770(410) Emulsion Tendency 40/40/0(10) 40/40/0(5) 40/40/0(10) 40/40/0 (5) 43/37/0(10) NSF Registered H1, HT1 H1 H1 H1 H1 ISO Yes Yes Yes Yes Yes Kosher Yes Yes Yes Yes Yes Halal Yes Yes - Yes Yes CFIA Yes Yes Yes Yes Yes FG-100 is designed for use in rotary screw compressors and applications requiring an ISO-32 lubricant. FG-200 & FG-250 are designed for use in rotary screw compressors and other applications requiring an ISO-46 or ISO-68 lubricant. FG-300 is designed for use in reciprocating compressors and other applications requiring an ISO-100 lubricant. FG-500 is designed for general lubrication and reciprocating compressors requiring an ISO-150 lubricant. Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the product should be recertified prior to use.

25 SYNTHETIC SYSTEM FLUSH September 26, 2013 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. Flushing Oil Summit Flushing Oil is a diester based product designed for flushing lubricant circulating systems. It has excellent detergency, dispersancy, and biodegradability properties. Flushing Oil is not recommended as an operational fluid. To flush a loaded system DSL -100S is recommended. PRODUCT Flushing Oil Specific Gravity C, cst 100 C, cst 5.4 Index 62 Pour Point, F ( C) (-42) Flash Point, F ( C) 435 (224)

26 July 24, 2013 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. NATURAL GAS ENGINES GEO PS GAS ENGINE OIL SERIES Summit Gas Engine Oils are manufactured from a blend of synthetic and petroleum base stocks. They are recommended for service in two-cycle and four-cycle gas engines, naturally aspirated and turbo-charged. GEO PS-130 and GEO PS-140 are low ash. They have an excellent gas engine oil additive package containing anti-wear agents, oxidation inhibitors and detergent -dispersants. PRODUCTS GEO PS-130 GEO PS-140 SAE Grade C, cst C, cst Index Flash Point, F ( C) 450 (232) 540 (282) Pour Point, F ( C) -25 (-32) -42 (-41) Foaming Tendency Seq I NIL NIL Seq II NIL NIL Seq III NIL NIL Copper Corrosion 1A 1A Sulfated Ash, % wt TBN, mg /KOH/g Customer Benefits: Reduced oil consumption Superior lubrication at all temperatures Longer engine life Faster starting in cold weather conditions

27 July 24,2013 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. NATURAL GAS ENGINES GEO SH GAS ENGINE OIL SERIES Summit GEO SH Gas Engine Oils are 100% full synthetic, PAO Ester Formulations for 2-cycle and 4 cycle lean burn and stoichiometric natural gas engines. Summit GEO SH-130 and GEO SH-140 are low ash with excellent TBN retention to combat oil degradation and provide protection in high temperature acidic environments. GEO SH Series was developed with field tested robust detergent/dispersant additive technology, balanced to keep pistons clean and low valve recession while minimizing spark plug fouling. Summit GEO SH Series Oils are recommended for four-stroke, high speed natural gas engines where Group II base products deteriorate prematurely or overheat under severe continuous high temperature operation. The end user benefits for Summit GEO SH Series include: Maximum Maintenance Flexibility Engine Uptime & Maximum Heat Release Excellent Fuel Efficiency & HP Improvement (BHP-hr) Cleaner Engine Operation & Prevents Ring Sticking Extended Drains Beyond Group II Based GEOs Excellent Low Temperature Pour and Cranking High Flash/High Fire Points NSCR Catalyst Compatible Bright Stock Free Recommended for high speed, four stroke engines: Caterpillar, MWM(Deutz), Dresser-Rand (I, II & III), GE Jenbacher, Superior, Wartsila, Waukesha and Worthington PRODUCTS GEO SH-130 GEO SH-140 SAE Grade C, cst C, cst Index Flash Point, F ( C) 485 (252) 550 (288) Pour Point, F ( C) -40 (-40) -53 (-47) Foaming Tendency Seq I NIL NIL Seq II NIL NIL Seq III NIL NIL Copper Corrosion 1A 1A Sulfated Ash, % wt TBN

28 May 13, 2004 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of May 13, SYNTHETIC GAS ENGINES GEO SH GAS ENGINE OIL SERIES Summit Synthetic Gas Engine Oils are recommended for service in two or four cycle gas engines, naturally aspirated and turbo-charged. Summit GEO SH-30 and GEO SH-40 are ashless and have an excellent gas engine additive package containing anti-wear agents, oxidation inhibitors and detergent-dispersants. PRODUCTS GEO SH-30 GEO SH-40 SAE Grade C, cst C, cst Index Flash Point, F ( C) 480 (249) 490 (254) Pour Point, F ( C) -40 (-40) -30 (-34) Foaming Tendency Seq I NIL NIL Seq II NIL NIL Seq III NIL NIL Copper Corrosion 1A 1A Sufated Ash, % wt. NIL NIL Customer Benefits: Reduced oil consumption Superior lubrication at all temperatures Longer engine life Faster starting in cold weather conditions

29 PREMIUM WHITE OIL HYDRAULIC March 9, 2012 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. HYPAR FG SERIES Summit HyPar FG Series hydraulic oils are formulated specially for hydraulic systems operating in the food service, beverage, and packaging industry. These premium white oil lubricants are NSF Registered and meet USDA 1998 (H1) guidelines (lubricants with incidental food contact). HyPar FG Series lubricants are Kosher certified and CFIA accepted. Summit is an ISO certified facility. HyPar FG Series lubricants are fortified with oxidation inhibitors, corrosion inhibitors, as well as anti-wear additives to enhance the superior qualities offered by the Food Grade base stock. They are extended life lubricants and have the same excellent compatibility as the Summit HyPar Series hydraulic oils. HYPAR FG FG-15 FG-22 FG-32 FG-46 FG-68 FG-100 ISO Grade C, cst C, cst F, SUS F, SUS Index Specific Gravity Flash Point, ºF (ºC) (213) (207) (230) (230) (232) (230) Fire Point, ºF (ºC) (221) (227) (246) (246) (249) (246) Pour Point, ºF (ºC) (-21) (-18) (-16) (-15) (-20) (-21) Emulsion 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 Tendency 10 Mins 10 Mins 10 Mins 10 Mins 10 Mins 10 Mins NSF Registered H1 H1 H1 H1 H1 H1 ISO Yes Yes Yes Yes Yes Kosher Yes Yes Yes Yes Yes Yes Halal Yes Yes Yes Yes Yes Yes CFIA Yes Yes Yes Yes Yes Yes HyPar FG-32, FG-46 & FG-68 lubricants do not produce an iridescent appearance (sheen) on the surface of the water when tested in accordance with the U.S. Coast Guard Static Sheen Test. Percent By Weight Phosphorous Sulfur Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the product should be recertified prior to use.

30 PREMIUM SYNTHETIC BLEND HYDRAULIC November 16, 2010 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of November 16, HYPAR SERIES Summit HyPar ashless hydraulic oils are formulated to meet the requirements of all types of hydraulic systems. HyPar oils are rust and oxidation inhibited to protect against rust, wear and the formation of sludge. They are compatible with seal materials normally used in hydraulic systems. Summit HyPar ashless hydraulic oils contain additives necessary to meet requirements for Denison HF-O, Vickers industrial and mobile applications and Cincinnati Milacron P-68, P-69 and P-70 specifications. PRODUCTS ISO Grade Specific Gravity C, cst C, cst F, SUS F, SUS Index Flash Point, ºF (ºC) (204) (218) (229) (246) (266) Fire Point, ºF (ºC) (221) (232) (246) (268) (288) Pour Point, ºF (ºC) (-36) (-37) (-37) (-37) (-37) HyPar 32, 46 & 68 do not produce an iridescent appearance (sheen) on the surface of the water when tested in accordance with the U.S. Coast Guard Static Sheen Test. Percent By Weight Phosphorous Sulfur Nitrogen 0.018

31 May 13, 2002 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current. HYSYN-22 SYNTHETIC HYDRAULIC Summit HySyn-22 ashless hydraulic oil is formulated from the highest quality synthetic hydrocarbons to meet the requirements of all types of hydraulic systems. HySyn 22 is rust and oxidation inhibited and protects against the formation of sludge. It is compatible with seal materials normally used in hydraulic systems. HySyn-22 was specifically developed for low temperature hydraulic applications and is approved by Bucyrus International, Inc. as a hydraulic oil in their (Bucyrus-Erie) 39R, 49R, and 59R Blast Hole Drills. Summit HySyn-22 is primarily recommended for extended fluid and component life in extreme cold temperature applications. Included in these recommendations are applications in mobile and stationary hydraulic systems utilizing piston, vane and gear pumps operating over a wide range of pressures and temperatures. PRODUCT HYSYN-22 ISO Grade 22 Specific Gravity 40 C, cst 100 C, cst -40 C, cst C, cp 3340 Index 130 Flash Point, F (ºC) 425 (218) Fire Point, F (ºC) 475 (246) Pour Point, F (ºC) -85 (-65) Demulsibility 40/40/0 (5 mins.) Hydrolytic Stability, 200 F, 48 hrs. Cu Wt. Loss, mg/cm2 0.1 Change, % 1.31 TAN Change, mg KOH TAN H2O, mg KOH 0.43 Insolubles, % 0.00

32 SYNTHETIC HYDRAULIC March 9, 2012 varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current `. HYSYN FG SERIES Summit HySyn FG Series hydraulic oils are formulated specially for hydraulic systems operating in the food service, beverage, and packaging industry. These fully synthetic lubricants are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). HySyn FG Series lubricants are Kosher/Halal certified and pending CFIA approval. Summit is an ISO certified facility. HySyn FG lubricants are fortified with oxidation inhibitors, corrosion inhibitors, as well as anti-wear additives to enhance the superior qualities offered by the synthetic hydrocarbon base stock. They are extended life lubricants and have the same excellent software compatibility as the Summit HySyn Series hydraulic oils. HYSYN FG FG-15 FG-22 FG-32 FG-46 FG-68 FG-100 ISO Grade C, cst C, cst F, SUS F, SUS Index Flash Point, ºF (ºC) (196) (232) (238) (254) (263) (268) Fire Point, ºF (ºC) (227) (257) (274) (296) (296) (307) Pour Point, ºF (ºC) (-75) (-70) (-63) (-57) (-54) (-51) Emulsion 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 40/40/0 Tendency 10 Mins 10 Mins 10 Mins 10 Mins 10 Mins 10 Mins Specific Gravity NSF Registered H1 H1 H1 H1 H1 H1 ISO Yes - Yes Yes Yes Yes Kosher Approved Yes Yes Yes Yes Yes Yes Halal Certified Yes Yes Yes Yes Yes Yes CFIA Accepted Yes Pending Yes Yes Yes Yes Percent By Weight Phosphorous Sulfur HySyn FG-46 does not produce an iridescent appearance (sheen) on the surface of the water when tested in accordance with the U.S. Coast Guard Static Sheen Test. Shelf Life: Product shelf life is 3 years from the date of manufacture, after which the product should be recertified prior to use.

PURE SYNTHETIC COMPRESSOR OIL ISO 22 THROUGH ISO 220

PURE SYNTHETIC COMPRESSOR OIL ISO 22 THROUGH ISO 220 PURE SYNTHETIC COMPRESSOR OIL #8 ISO 22 THROUGH ISO 2 Pure Synthetic Compressor Oil is a full synthetic, non-detergent, ashless, non-zinc containing anti-wear, rust and oxidation inhibited premium quality

More information

COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320

COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 Special Features: It is specially blended from saturated paraffinic Group II base stocks and selected premium grade of antioxidants, anti-rust,

More information

505 ECOSHIELD BIODEGRADABLE DRIP OIL ISO 32, 46 & ISO 68

505 ECOSHIELD BIODEGRADABLE DRIP OIL ISO 32, 46 & ISO 68 505 ECOSHIELD BIODEGRADABLE DRIP OIL ISO 32, 46 & ISO 68 EcoShield Biodegradable Drip oil is a fully formulated anti-wear, readily biodegradable, environmentally friendly, ecologically responsive, non-toxic

More information

#112B BIODEGRADABLE HYDRAULIC FLUID ISO 32, 46 & ISO 68

#112B BIODEGRADABLE HYDRAULIC FLUID ISO 32, 46 & ISO 68 #112B BIODEGRADABLE HYDRAULIC FLUID ISO 32, 46 & ISO 68 Biodegradable Hydraulic Fluid is a fully formulated anti-wear, readily biodegradable, environmentally friendly, ecologically responsive, non-toxic

More information

Hydraulic Fluids. Castrol Blue Hydraulic Plus C 19. Product Data. Water Tolerance. Thermal Stability Oxidation and Control

Hydraulic Fluids. Castrol Blue Hydraulic Plus C 19. Product Data. Water Tolerance. Thermal Stability Oxidation and Control C 19 meets the most severe industry requirements including the new hybrid test from Denison (T6H2OC), which incorporates both vane and piston pumps under wet and dry conditions over 600 hours. Formulated

More information

527 ECOSHIELD BIODEGRADABLE ROCK DRILL OIL ISO 46 through 320

527 ECOSHIELD BIODEGRADABLE ROCK DRILL OIL ISO 46 through 320 527 ECOSHIELD BIODEGRADABLE ROCK DRILL OIL ISO 46 through 320 Ecoshield Biodegradable Rock Drill Oil is a readily biodegradable, anti-wear, extreme pressure, emulsifiable, low fog generating oil that is

More information

294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680

294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680 294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680 Supreme Gear Lube No Tack is a multipurpose thermally stable and thermally durable para-synthetic gear lubricant that is recommended

More information

AEON. Compressor Lubricants

AEON. Compressor Lubricants Compressor Lubricants 2 Protect Your Investment Lubricants simply the best protection of your investment. Gardner Denver Compressor Lubricants It is a known fact that a compressor s is its life-blood,

More information

PRECISION HYDRAULIC PERFORMANCE

PRECISION HYDRAULIC PERFORMANCE PRECISION HYDRAULIC PERFORMANCE CENEX PREMIUM HYDRAULIC FLUIDS CENEX HYDRAULIC OIL for All Your Applications Choose the right premium hydraulic fluid for all of your equipment applications. Your precision

More information

Industrial-Grade Synthetic Compressor Oils

Industrial-Grade Synthetic Compressor Oils Industrial-Grade Synthetic Compressor Oils Performance Designed for Industry The FIRST in Synthetics... the FIRST in Performance AMSOIL Synthetic Compressor Oils help increase productivity and profitability.

More information

315 SIMPLEX SUPREME. Continued on Next Page TD-315 (Rev. 08/2009)

315 SIMPLEX SUPREME. Continued on Next Page TD-315 (Rev. 08/2009) 315 SIMPLEX SUPREME Simplex Supreme is a universal extreme pressure para-synthetic torque converter fluid that is designed for use in most farm and industrial tractors. Simplex Supreme meets and exceeds

More information

#203SW Wind Turbine Oil ISO 220, 320, 460 and 680

#203SW Wind Turbine Oil ISO 220, 320, 460 and 680 #203SW Wind Turbine Oil ISO 220, 320, 460 and 680 Wind Turbine Oil is a para-synthetic extreme pressure gear lubricant that is designed for use in the lubrication of heavily loaded gears and rolling element

More information

Mobil SHC Gear Series

Mobil SHC Gear Series Mobil SHC Gear Series Gear Oils Product Description Mobil SHC Gear Series is a line of exceptional performance, synthetic industrial gear oils designed to provide outstanding protection of gears and bearings,

More information

RANDO HDZ. Rando HDZ, our premium, zinc additized, anti-wear hydraulic oil that helps provide you with:

RANDO HDZ. Rando HDZ, our premium, zinc additized, anti-wear hydraulic oil that helps provide you with: HYDRAULIC OILS RANDO HDZ The demands on your equipment, time and bottom line multiply daily. Rando HDZ helps keep your equipment operating longer, faster and harder, allowing you to extend the time between

More information

Specialty Industrial Lubricants

Specialty Industrial Lubricants Specialty Industrial Lubricants Since 1958, The Orelube Corporation has manufactured and marketed Specialty Lubricating Oils & Greases for Industrial applications worldwide. From synthetic base fluids

More information

INDUSTRIAL GEARBOX OILS PARTHAN EP

INDUSTRIAL GEARBOX OILS PARTHAN EP INDUSTRIAL GEARBOX OILS PARTHAN EP These are premium quality oils manufactured from high quality base stocks fortified with extreme pressure additives, antifoam, antirust and antioxidation agents, thereby

More information

RANDO HD 10, 22, 32, 46, 68, 100, 150, 220, 320

RANDO HD 10, 22, 32, 46, 68, 100, 150, 220, 320 RANDO HD 10, 22, 32, 46, 68, 100, 150, 220, 320 PRODUCT DESCRIPTION Rando HD oils are formulated with premium base oil technology and designed to give robust protection to hydraulic pumps in mobile and

More information

BG&GHF. Biodegradable Hydraulic Fluid

BG&GHF. Biodegradable Hydraulic Fluid BG&GHF Biodegradable Hydraulic Fluid Synthetic Lubricants and Filters Inc. 7401 University Dr., Shreveport, LA 71105 (800) 637-5126 (p) (866) 305-5126 (f) www.slfi.net About BG&GHF Provides biodegradability

More information

King Industries, Inc. Additives & Synthetic Base Oils for Use in Lubricants with Incidental Food Contact

King Industries, Inc. Additives & Synthetic Base Oils for Use in Lubricants with Incidental Food Contact King Industries, Inc. Additives & Synthetic Base Oils for Use in Lubricants with Incidental Food Contact NSF HX-1 Registered Products: KR - Synthetic Base Oils AW - Multi-functional Additive K-CORR NF

More information

G.O. 80w90. Product Data. Premium Extreme Pressure Gear Oil. Typical Gear Box Problems: 4 Dry Starts. 4 Upper and Middle Gear Failure

G.O. 80w90. Product Data. Premium Extreme Pressure Gear Oil. Typical Gear Box Problems: 4 Dry Starts. 4 Upper and Middle Gear Failure Product Data G.O. 80w90 Premium Extreme Pressure Gear Oil Typical Gear Box Problems: Dry Starts Upper and Middle Gear Failure Gear Box Runs Hot Lubrication Does Not Hold Up Under Extreme Conditions Foaming

More information

Premium Protection for Today s Engines EXTRA PROTECTION AND VALUE. PROTECK TM ELITE K SYNTHETIC BLEND ENGINE OIL

Premium Protection for Today s Engines EXTRA PROTECTION AND VALUE. PROTECK TM ELITE K SYNTHETIC BLEND ENGINE OIL Premium Protection for Today s Engines TM EXTRA PROTECTION AND VALUE. TM ELITE K SYNTHETIC BLEND ENGINE OIL TM ELITE K SYNTHETIC BLEND 10W-30 AND 15W-40 CK-4 ENGINE OIL PROVIDES EXTRA PROTECTION AND VALUE,

More information

BEARING OILS FOR STEEL PLANTS HP FILM OIL

BEARING OILS FOR STEEL PLANTS HP FILM OIL BEARING OILS FOR STEEL PLANTS HP FILM OIL Special Features: HP FILM OILS are highly refined mineral oils suitable for oil film bearings used in steel plants. The product is blended from solvent extracted

More information

CETUS HIPERSYN OIL 32, 46, 68, 100, 150, 220, 320, 460

CETUS HIPERSYN OIL 32, 46, 68, 100, 150, 220, 320, 460 CETUS HIPERSYN OIL 32, 46, 68, 100, 150, 220, 320, 460 PRODUCT DESCRIPTION Cetus HiPerSYN Oils are synthetic compressor oils. Cetus HiPerSYN Oils are recommended for air compressors; especially portable

More information

SAMLUBE GEAR MAX RANGE EP 90; EP 80W90 & EP 85W140 (GL4)

SAMLUBE GEAR MAX RANGE EP 90; EP 80W90 & EP 85W140 (GL4) GEAR OILS SAMLUBE GEAR MAX RANGE EP 90; EP 80W90 & EP 85W140 (GL4) High performance mild extreme pressure gear lubricant, containing multi-functional additives required for mild extreme pressure conditions.

More information

Hydraulic Fluids. Castrol Dual Range HV C 14. Product Data. Stay-in-Grade Performance. Water Tolerance. Thermal Stability.

Hydraulic Fluids. Castrol Dual Range HV C 14. Product Data. Stay-in-Grade Performance. Water Tolerance. Thermal Stability. C 14 Stay-in-Grade Performance The shear stable polymers in keep the fluid s viscosity consistent over a wide range of temperatures. High operating temperatures, which may break down other hydraulic oils

More information

Reliable under pressure. Lubrication solutions for air compressors

Reliable under pressure. Lubrication solutions for air compressors your global specialist Special knowledge Reliable under pressure. Lubrication solutions for air compressors Protect and optimise your compressors Protect and optimise your compressors 3 Selected lubricants

More information

HEAVY DUTY DIESEL ENGINE OILS

HEAVY DUTY DIESEL ENGINE OILS HEAVY DUTY DIESEL ENGINE OILS FULL SYNTHETIC MAG 1 Full Heavy Duty Diesel Engine Oil is designed to provide the highest levels of protection and performance from our most advanced technology and formulations.

More information

Product Description. Mobil SHC 600 Series. Mobil Industrial, Canada. Exceptional Performance Gear and Bearing Oils

Product Description. Mobil SHC 600 Series. Mobil Industrial, Canada. Exceptional Performance Gear and Bearing Oils Mobil SHC 600 Series Page 1 of 6 Mobil SHC 600 Series Mobil Industrial, Canada Exceptional Performance Gear and Bearing Oils Product Description Mobil SHC 600 Series lubricants are exceptional performance

More information

Part No oz. (946 ml) bottle 11 oz. (325 ml) can

Part No oz. (946 ml) bottle 11 oz. (325 ml) can Diesel Service Page 1 / Page 2 The BG Diesel Service addresses the needs of these specialized powerplants by restoring lost performance and preventing costly repairs. This service will reduce overall maintenance

More information

High Performance Industrial Lubricants for Food and Beverage Processing

High Performance Industrial Lubricants for Food and Beverage Processing High Performance Industrial Lubricants for Food and Beverage Processing AVO6048 A complete line of industrial lubricants and fluids. One Trusted Source for All Your Lubricant Needs For nearly 60 years,

More information

NSF HX-1 Registered Additives & Synthetic Base Oils For Lubricants with Incidental Food Contact

NSF HX-1 Registered Additives & Synthetic Base Oils For Lubricants with Incidental Food Contact SPECIALTY CHEMICALS NSF HX-1 Registered Additives & Synthetic Base Oils For Lubricants with Incidental Food Contact NSF HX-1 Registered Products King Industries offers a selection of high performance additives

More information

Product Information. UCON Compressor Lubricant RSC-155 for Rotary Screw Compressors

Product Information. UCON Compressor Lubricant RSC-155 for Rotary Screw Compressors Product Information 8&21Ã)OXLGVÃÉÃ/XEULFDQWV UCON Compressor Lubricant RSC-155 for Rotary Screw Compressors 3URGXFW 'HVFULSWLRQ )HDWXUHVÃDQG %HQHILWV UCON Compressor Lubricant RSC-155 is a high performance

More information

Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist.

Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Description Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Features & Benefits PRODUCT DATA

More information

AMERILUBE ADVANCED TECHNOLOGY LUBRICANTS COMPRESSOR LUBRICANTS

AMERILUBE ADVANCED TECHNOLOGY LUBRICANTS COMPRESSOR LUBRICANTS COMPRESSOR LUBRICANTS AMERICAN SYNTHOL, INC. 2930 MOUNTAIN TRACE, ROSWELL, GA 30075 PHONE: 800-633-5457 / FAX: 888-731-9534 SERIES DE COMPRESSOR FLUIDS AMERILUBE SERIES DE AMERILUBE SERIES DE compressor

More information

PASSENGER CAR MOTOR OILS

PASSENGER CAR MOTOR OILS PASSENGER CAR MOTOR OILS FULL SYNTHETIC OEMs continue to evolve engine designs that demand more from motor oil. One brand has evolved right alongside MAG 1. MAG 1 with FMX Technology provides unsurpassed

More information

Mobil SHC 600 Series. Exceptional Performance Gear and Bearing Oils. Product Description. Features and Benefits

Mobil SHC 600 Series. Exceptional Performance Gear and Bearing Oils. Product Description. Features and Benefits Mobil SHC 600 Series Exceptional Performance Gear and Bearing Oils Product Description Mobil SHC 600 Series lubricants are exceptional performance gear and bearing oils designed to provide outstanding

More information

#281A SYNTHETIC PLUS HEAT TRANSFER OIL

#281A SYNTHETIC PLUS HEAT TRANSFER OIL #281A SYNTHETIC PLUS HEAT TRANSFER OIL Synthetic Plus Heat Transfer Oil is a non-corrosive, non-fouling, para-synthetic heat transfer fluid that is formulated to provide fast and efficient heat transfer

More information

Mobil Glygoyle Series Polyalkylene Glycol (PAG) Gear, Bearing and Compressor Lubricant

Mobil Glygoyle Series Polyalkylene Glycol (PAG) Gear, Bearing and Compressor Lubricant Mobil Glygoyle Series Polyalkylene Glycol (PAG) Gear, Bearing and Compressor Lubricant Product Description Mobil Glygoyle Series lubricants are supreme performance gear, bearing and compressor oils designed

More information

Formulated for better protection, longer oil life and better system efficiency. Extra protection Industrial applications

Formulated for better protection, longer oil life and better system efficiency. Extra protection Industrial applications SHELL TELLUS INDUSTRIAL HYDRAULIC FLUIDS The Shell Tellus range of hydraulic fluids is designed to help make it easy for equipment operators to select the Shell lubricant that will best deliver value to

More information

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer

More information

DELIVERING MAXIMUM ENGINE PROTECTION

DELIVERING MAXIMUM ENGINE PROTECTION DELIVERING MAXIMUM ENGINE PROTECTION CENEX HEAVY DUTY DIESEL ENGINE OILS PREMIUM HEAVY DUTY DIESEL ENGINE OILS for Superior Engine Protection Engineered to exceed the highest industry and diesel engine

More information

Ordinary lubricants are manufactured from paraffinic base oils that use low grade crudes and undergo a 3-step refining process.

Ordinary lubricants are manufactured from paraffinic base oils that use low grade crudes and undergo a 3-step refining process. Ordinary lubricants are manufactured from paraffinic base oils that use low grade crudes and undergo a 3-step refining process. NAPHTHENE PARAFFIN Oberon sets the standards in lubrication engineering with

More information

Product Description. Features and Benefits. Mobilgear 600 XP Series Mobil Industrial, United States. Gear Oil

Product Description. Features and Benefits. Mobilgear 600 XP Series Mobil Industrial, United States. Gear Oil Series Mobil Industrial, United States Gear Oil Product Description The Series are extra high performance gear oils having outstanding extreme pressure characteristics and load-carrying properties, intended

More information

Significance of Each Test. 1. Color (Visual)

Significance of Each Test. 1. Color (Visual) Significance of Each Test 1. Color (Visual) Determine the color of lubricant product by assessing the appearance of transmitted light appearance and intensity, as compare with a standard. Color alone is

More information

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer*

More information

15W40 CH4/SJ. For all naturally aspirated and heavy duty turbocharged and intercooler diesel engines.

15W40 CH4/SJ. For all naturally aspirated and heavy duty turbocharged and intercooler diesel engines. 15W40 CH4/SJ : This oil is a high performance, dedicated heavy duty engine lubricant designed for use in modern high speed turbocharged diesel engines. It uses an exclusive additive formulation in conjunction

More information

Performance Blends. NA-LUBE BL Series Ashless Packages for Industrial Lubricants

Performance Blends. NA-LUBE BL Series Ashless Packages for Industrial Lubricants Performance Blends NA-LUBE BL Series Ashless Packages for Industrial Lubricants King Industries Ashless Additive Blends & Packages King Industries, Inc. has been developing and offering high performance

More information

FOOD GRADE LUBRICANTS

FOOD GRADE LUBRICANTS FOOD LUBRICANTS 1 Introduction Ultrachem manufactures a complete line of Omnilube premium food grade lubricants for all food, beverage, pharmaceutical, and related industries. Selecting the correct food

More information

Mobilgear 600 XP Series

Mobilgear 600 XP Series PrintFind a PDSFind a MSDS Mobilgear Series Gear Oil Product Description The Mobilgear Series are extra high performance gear oils having outstanding extreme pressure characteristics and load-carrying

More information

Product Description. Features and Benefits. Mobilgear 600 XP Series. Mobil Industrial, Canada. Gear Oil

Product Description. Features and Benefits. Mobilgear 600 XP Series. Mobil Industrial, Canada. Gear Oil 600 XP Series Page 1 of 5 600 XP Series Mobil Industrial, Canada Gear Oil Product Description The 600 XP Series are extra high performance gear oils having outstanding extreme pressure characteristics

More information

EXCEPTIONAL STABILITY PROFOUND PERFORMANCE

EXCEPTIONAL STABILITY PROFOUND PERFORMANCE EXCEPTIONAL STABILITY PROFOUND PERFORMANCE CENEX PREMIUM GASOLINE ENGINE OILS POWERFUL GASOLINE ENGINE OILS Remarkable Engine Protection Engineered to exceed the latest industry and manufacturers requirements

More information

LUBRIPLATE SYN-3002 & SYN LUBRIPLATE SYNXTREME HD Series 4-5 LUBRIPLATE SFL SERIES 6-7 LUBRIPLATE SYNFLUSH 8-9

LUBRIPLATE SYN-3002 & SYN LUBRIPLATE SYNXTREME HD Series 4-5 LUBRIPLATE SFL SERIES 6-7 LUBRIPLATE SYNFLUSH 8-9 TABLE OF CONTENTS: LUBRIPLATE SYN-3002 & SYN-3001 2-3 LUBRIPLATE SYNXTREME HD Series 4-5 LUBRIPLATE SFL SERIES 6-7 LUBRIPLATE SYNFLUSH 8-9 LUBRIPLATE PGO 100% SYNTHETIC GEAR OILS 10-11 LUBRIPLATE SYNTHETIC

More information

Commercial and Industrial Products

Commercial and Industrial Products Commercial and Industrial Products Lubricants, filters and services for off-road and industrial applications Reduced operating costs Greater fuel economy Increased equipment durability Extended drain intervals

More information

Industrial Strength Lubricants

Industrial Strength Lubricants Industrial Strength Lubricants A Complete Line of Proven Formulas for Every Lubricating Need! EVERYTHING ELSE IS JUST A LUBE! Tri-Flow Lubricants are ideal for preventive and corrective maintenance in

More information

FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER

FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER FAMILY OF PRODUCTS MEROPA GEAR OILS CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER LUBRICANTS FOR MEROPA GEAR OILS We understand the maintenance value drivers in gear lubrication. Let us help your organization

More information

Alkylated Naphthalenes. UTS Seminar St Petersburg Sept 13-15, 2011 Sandy Reid-Peters

Alkylated Naphthalenes. UTS Seminar St Petersburg Sept 13-15, 2011 Sandy Reid-Peters Alkylated Naphthalenes UTS Seminar St Petersburg Sept 13-15, 2011 Sandy Reid-Peters 1 What are Alkylated Naphthalenes (AN)? Alkylated aromatic fluids Reaction products of olefins and naphthalene American

More information

Comparing Conventional PAGs to Oil Soluble Polyalkylene Glycols

Comparing Conventional PAGs to Oil Soluble Polyalkylene Glycols Comparing Conventional PAGs to Oil Soluble Polyalkylene Glycols L. W. Budd Lee The Dow Chemical Company Midland MI USA STLE, Detroit May 9 th 2013 Contents Background of Conventional PAGs Chemistry & physical

More information

New US EPA Regulations: Environmentally Acceptable Lubricants for use in Vessel General Permit - VGP Small Vessel General Permit svgp

New US EPA Regulations: Environmentally Acceptable Lubricants for use in Vessel General Permit - VGP Small Vessel General Permit svgp New US EPA Regulations: Environmentally Acceptable Lubricants for use in Vessel General Permit - VGP Small Vessel General Permit svgp Presented by: James Kovanda Vice President American Chemical Technologies,

More information

High Performance Industrial Lubricants for Food and Beverage Processing

High Performance Industrial Lubricants for Food and Beverage Processing High Performance Industrial Lubricants for Food and Beverage Processing AVO6048 A complete line of industrial lubricants and fluids. One Trusted Source for All Your Lubricant Needs For nearly 60 years,

More information

RANDO HDZ 15, 22, 32, 46, 68, 100

RANDO HDZ 15, 22, 32, 46, 68, 100 RANDO HDZ 15, 22, 32, 46, 68, 100 PRODUCT DESCRIPTION Rando HDZ oils are formulated with premium base oil technology and designed to give robust protection to hydraulic pumps. CUSTOMER BENEFITS Rando HDZ

More information

PRO-SPEC IV SYNTHETIC BLEND

PRO-SPEC IV SYNTHETIC BLEND PRO-SPEC IV SYNTHETIC BLEND 89 Years of world-class manufacturing experience has enabled Texas Refinery Corp. to develop the most robust Total Base Number in the industry, miles ahead of other CJ-4 oils

More information

MULTI-PURPOSE GREASE PRODUCT DESCRIPTION TECHNICAL PROPERTIES PERFORMANCE FEATURES APPLICATIONS GREASE

MULTI-PURPOSE GREASE PRODUCT DESCRIPTION TECHNICAL PROPERTIES PERFORMANCE FEATURES APPLICATIONS GREASE SONIC BLUE GUARD MULTI-PURPOSE PRODUCT DESCRIPTION SONIC BLUE GUARD is a premium-quality, multipurpose NLGI #2, lithium-complex grease. It is designed to lubricate effectively both heavy- and light-duty

More information

THE SHELL OMALA G SPECIALITY. Enclosed industrial spur and bevel gears where extra shock-load protection is needed or particulate contamination occurs

THE SHELL OMALA G SPECIALITY. Enclosed industrial spur and bevel gears where extra shock-load protection is needed or particulate contamination occurs SHELL OMALA INDUSTRIAL GEAR OILS The Shell Omala range of industrial gear oils is designed to help make it easy for equipment operators to select the Shell oil that will best deliver value to their operations

More information

EXCEPTIONAL STABILITY PROFOUND PERFORMANCE

EXCEPTIONAL STABILITY PROFOUND PERFORMANCE EXCEPTIONAL STABILITY PROFOUND PERFORMANCE CENEX PREMIUM GASOLINE ENGINE OILS POWERFUL GASOLINE ENGINE OILS Remarkable Engine Protection Engineered to exceed the latest industry and manufacturers requirements

More information

Mobil DTE 10 Excel Series

Mobil DTE 10 Excel Series Mobil DTE 10 Excel Series Premium Quality Hydraulic Oils Product Description Mobil DTE 10 Excel Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high

More information

PASSENGER CAR MOTOR OILS

PASSENGER CAR MOTOR OILS PASSENGER CAR MOTOR OILS FULL SYNTHETIC OEMs continue to evolve engine designs that demand more from motor oil. One brand has evolved right alongside MAG 1. MAG 1 with FMX Technology provides unsurpassed

More information

Conventional and Synthetic Blend Lubricants

Conventional and Synthetic Blend Lubricants Below is a short summary about some of the more popular lubricants that we carry at the Beattie Coop. Conventional and Synthetic Blend Lubricants SuperLube TMS (Heavy Duty Diesel Engine Oil) SuperLube

More information

NGEO REVIEW Ray Sparling, Technical Support. January 20, 2016

NGEO REVIEW Ray Sparling, Technical Support. January 20, 2016 NGEO REVIEW Ray Sparling, Technical Support January 20, 2016 Agenda Natural Gas Stationary Engines Types/Applications Vehicular Engines Types/Applications OEMs and Approvals Summary Open Discussion Stationary

More information

INDUSTRIAL LUBRICANTS & GREASES

INDUSTRIAL LUBRICANTS & GREASES INDUSTRIAL LUBRICANTS & GREASES ANTI-WEAR HYDRAULIC OIL AW ISO 22* AW ISO 32* AW ISO 46* AW ISO 68* 5 Gallon 65847 55 Gallon 62970 3/1 Gallon 00326 2/2.5 Gallon 00322 5 Gallon 00325 55 Gallon 62861 330

More information

BEL-RAY MOTOR OIL. Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing

BEL-RAY MOTOR OIL. Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing V-Twin Synthetic Motor Oil BEL-RAY MOTOR OIL Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and and keeps pistons and rings from scuffing Features high polarity synthetic base

More information

HAVOLINE PRODS FULL SYNTHETIC MOTOR OIL

HAVOLINE PRODS FULL SYNTHETIC MOTOR OIL HAVOLINE PRODS FULL SYNTHETIC MOTOR OIL SAE 5W-40, Euro 5W-40 PRODUCT DESCRIPTION Fully synthetic motor oils formulated to provide exceptional wear protection in hot or cold operating temperatures. They

More information

Mobilgear 600 XP Series

Mobilgear 600 XP Series Mobilgear 600 XP Series Gear Oil Product Description The Mobilgear 600 XP Series are extra high performance gear oils having outstanding extreme pressur Mobilgear 600 XP Series is designed to stay ahead

More information

NA-LUBE EP 5000 Series

NA-LUBE EP 5000 Series EP 5000 Series EP 5000 Series EP 5000 Series consists of low odor, light colored sulfurized fatty acid esters, triglycerides and a-olefins. The 5000 Series is produced from hydrogen sulfide and elemental

More information

Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations. Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA

Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations. Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA STLE May 18-22, 2014, Florida Dow.com Presentation Objectives

More information

HDAX FAMILY OF PRODUCTS

HDAX FAMILY OF PRODUCTS HDAX FAMILY OF PRODUCTS Chevron formulates, blends and distributes gas engine oils throughout the world. From field gathering, compression, processing, transmission and power generation, we are there,

More information

Industrial Lubricants. Selection Guide Compressor Oils

Industrial Lubricants. Selection Guide Compressor Oils Industrial Lubricants Selection Guide Compressor Oils 2 INDUSTRIAL LUBRICANTS Compressor Lubricants A fast-growing global market Photo in courtesy of: Burckhardt Compression AG Increasing lubricant requirements

More information

Shanghai PingYiao Trading CO.,Ltd. UCON Fluids & Lubricants UCON Compressor Lubricant R-4 Product Description UCON Compressor Lubricant R-4 is a high-

Shanghai PingYiao Trading CO.,Ltd. UCON Fluids & Lubricants UCON Compressor Lubricant R-4 Product Description UCON Compressor Lubricant R-4 is a high- UCON Fluids & Lubricants UCON Compressor Lubricant R-4 Product Description UCON Compressor Lubricant R-4 is a high-performance, PAG-based synthetic lubricant designed for superior cylinder lubrication

More information

JOHNSON CONTROLS PARTS CENTRE. Sabroe S68 refrigeration oil

JOHNSON CONTROLS PARTS CENTRE. Sabroe S68 refrigeration oil JOHNSON CONTROLS PARTS CENTRE refrigeration oil Hydro-treated, high performance oil for refrigeration Sabroe offers the highest quality lubricants available for today s refrigeration market. The increased

More information

PLANTOGEAR S. Environmentally acceptable lubricating oil and EP industrial gear oil based on synthetic saturated esters.

PLANTOGEAR S. Environmentally acceptable lubricating oil and EP industrial gear oil based on synthetic saturated esters. Description PLANTOGEAR 100 S and 150 S products are environmentally acceptable industrial gear oils based on special saturated synthetic esters which guarantee high ageing resistance and excellent wear

More information

HEAVY DUTY OIL STABILIZER PURE SYNTHETIC OIL STABILIZER ENGINE OIL STOP LEAK

HEAVY DUTY OIL STABILIZER PURE SYNTHETIC OIL STABILIZER ENGINE OIL STOP LEAK ENGINE OIL ADDITIVES HEAVY DUTY OIL STABILIZER Increases oil life at least 50% longer Reduces oil consumption Eliminates dry starts Raises oil pressure Increases power and miles per gallon 1 Quart 10001

More information

Unit D: Agricultural Equipment Systems. Lesson 1: Understanding Applications of Fluids and Lubricants in Agricultural Equipment

Unit D: Agricultural Equipment Systems. Lesson 1: Understanding Applications of Fluids and Lubricants in Agricultural Equipment Unit D: Agricultural Equipment Systems Lesson 1: Understanding Applications of Fluids and Lubricants in Agricultural Equipment 1 Terms Ash content bottom dead center cloud point compression ratio coolant

More information

Specifications of Products

Specifications of Products ations of Products General Purpose Oil : White Mineral Oil Kinematic Viscocity 15/4 cst 40 HP-080 0.875 7.85 180 78-25.0 Lubricants and petrochemical applications, textile HS-080 0.864 8.56 158 60-35.0

More information

PLANTOGEAR S. Environmentally acceptable lubricating oil and EP industrial gear oil based on synthetic saturated esters.

PLANTOGEAR S. Environmentally acceptable lubricating oil and EP industrial gear oil based on synthetic saturated esters. Description PLANTOGEAR S products are environmentally acceptable industrial gear oils based on special saturated synthetic esters which guarantee high ageing resistance and excellent wear protection -

More information

INTRODUCTION TO INDUSTRIAL GEARS AND THEIR LUBRICATION

INTRODUCTION TO INDUSTRIAL GEARS AND THEIR LUBRICATION INTRODUCTION TO INDUSTRIAL GEARS AND THEIR LUBRICATION. Types of gears From a lubrication perspective, gears can be considered under three classes: () spur, helical, herringbone, straight-bevel and spiral

More information

SYNTHETIC BASE STOCKS

SYNTHETIC BASE STOCKS Polybutenes Acetylene Black Performance mance Chemical Additiv Additives Polyalphaolefins Alkylate Fluids Refrigeration Fluids Dielectric Fluids Cable Flood, Fill & Gels SYNTHETIC BASE STOCKS Corrosion

More information

Industrial Grade Synthetic Compressor Oils

Industrial Grade Synthetic Compressor Oils Industrial Grade Synthetic Compressor Oils Performance Designed for Industry The FIRST in Synthetics... the FIRST in Performance AMSOIL Synthetic Compressor Oils increase the productivity and profitability

More information

Synthetic EP air compressor oils based on PAO, for turbo, screw, vane and piston compressors; High-performance synthetic, PAO-based hydraulic fluids

Synthetic EP air compressor oils based on PAO, for turbo, screw, vane and piston compressors; High-performance synthetic, PAO-based hydraulic fluids Description Compressed air has become a major form of energy and the reliable generation of compressed air is vital. Operators require compressors to function perfectly over and beyond entire service intervals.

More information

General 1. Lubricants CASE IH HY-TRAN ULTRA (MS1209) HYDRAULIC/TRANSMISSION FLUIDS

General 1. Lubricants CASE IH HY-TRAN ULTRA (MS1209) HYDRAULIC/TRANSMISSION FLUIDS General 1 CASE IH HY-TRAN ULTRA (MS1209) HYDRAULIC/TRANSMISSION FLUIDS FOR CASE, INTERNATIONAL HARVESTER & CASE IH EQUIPMENT Case IH Hy-Tran Ultra will absorb at least 1% water and still remain stable

More information

NA-LUBE BL-1232 EL Environmentally Friendly Ashless Additive Package for Ester Based Systems

NA-LUBE BL-1232 EL Environmentally Friendly Ashless Additive Package for Ester Based Systems NA-LUBE Environmentally Friendly Ashless Additive Package for Ester Based Systems For information about the European Ecolabel, visit www.ecolabel.eu NEW NA-LUBE Environmentally Driven...Performance Proven

More information

A Universal Muti-Purpose Power/Transmission Performance Package

A Universal Muti-Purpose Power/Transmission Performance Package Universal Muti-Purpose Power/Transmission Performance Package Lubrizol 9990 provides excellent extreme pressure protection for maximum gear life and capacity for wet brakes and power-take-off clutches,

More information

uridongne co,. ltd. uridongne co., ltd. Industrial Lubricants

uridongne co,. ltd. uridongne co., ltd. Industrial Lubricants Industrial Lubricants uridongne co,. ltd. Lubricant Research Institute #40 Galji-ro, Namsan-myeon, Gyeongsan-si, Gyeongsangbuk-do, 38573, South Korea TEL : +82-53-857-5900 FAX : +82-53-851-7116 www.euridongne.com

More information

Oil Soluble Polyalkylene Glycol Hydraulic Fluid: Equipment Performance Testing and Case Study

Oil Soluble Polyalkylene Glycol Hydraulic Fluid: Equipment Performance Testing and Case Study Oil Soluble Polyalkylene Glycol Hydraulic Fluid: Equipment Performance Testing and Case Study Authors Andrew Larson, The Dow Chemical Company Dr. Martin Greaves, The Dow Chemical Company The Dow Chemical

More information

Mobil EAL Envirosyn H Series

Mobil EAL Envirosyn H Series . Mobil EAL Envirosyn H Series Hydraulic Fluids Product Description Mobil EAL Envirosyn H Series oils are super premium, high performance fully synthetic environmentally aware hydrauli circulating oils

More information

515 ECOSHIELD BIODEGRADABLE SIMPLEX UTHF

515 ECOSHIELD BIODEGRADABLE SIMPLEX UTHF TECHNICAL DATA 102 Barton Street, St. Louis MO 63104 Ph: 800-325-9962 / Fax: 314-865-4107 www.schaefferoil.com 515 ECOSHIELD BIODEGRADABLE SIMPLEX UTHF EcoShield Biodegradable Simplex UTHF is a fully formulated

More information

Agritrans has been specifically developed to meet a wide range of specifications from most modern tractor and hydrualic pump OEM s.

Agritrans has been specifically developed to meet a wide range of specifications from most modern tractor and hydrualic pump OEM s. DESCRIPTION Agritrans is a multi purpose oil suited to tractors requiring a common oil for transmissions, hydraulics, differentials, final drives, wet clutches and brakes. The anti squawk additive ensures

More information

Mobil Delvac 1300 Super

Mobil Delvac 1300 Super PrintFind a PDSFind a MSDS Mobil Delvac 1300 Super Extra High Performance Diesel Engine Oil Product Description Mobil Delvac 1300 Super 10W-30 and 15W-40 are extra high performance diesel engine oils that

More information

The values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification.

The values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification. HEAVY-DUTY DIESEL MOTOR OIL D-MO 10W-30, 15W-40 PRODUCT DESCRIPTION D-MO (Diesel Motor Oil) is designed to exceed the tests required for the new API CK-4 specification for all naturally aspirated and high-output

More information

Synthetic Gear Oil Performance Comparison

Synthetic Gear Oil Performance Comparison Synthetic Gear Oil Performance Comparison Gearbox Failure Source Gears and Bearings Wear Out or Seize Rust and Corrosion Thermal Breakdown Pump Cavitation, Dry Areas Oil Deposit Build-up Thickening in

More information

PRODUCT NAME ANTI OXIDANT BRAND NAME PETRO HIND PRODUCT CODE- BAB 108

PRODUCT NAME ANTI OXIDANT BRAND NAME PETRO HIND PRODUCT CODE- BAB 108 PRODUCT NAME ANTI OXIDANT PRODUCT CODE- BAB 108 BAB 108 is a kind of multipurpose ash-free additive. It not only boasts outstanding anti-oxidation performance, but has great abrasion resistance and extreme

More information

Additin RC 9305 Additive Package

Additin RC 9305 Additive Package Technical Data Sheet Additin RC 935 Additive Package Type Ashless multifunctional oxidation, rust and wear inhibiting additive package - for antiwear hydraulic fluids according to: DIN 51524, part 2 and

More information