* Not Working. Name of Laboratory (Staff Names- Qualification) Type(s) of Workstations (No. of each type) Nature of Experiments

Size: px
Start display at page:

Download "* Not Working. Name of Laboratory (Staff Names- Qualification) Type(s) of Workstations (No. of each type) Nature of Experiments"

Transcription

1 Laboratories & Lab Work Number of Total Engineering + Computing Courses: 27 Number of Lab Courses: 30 Number of Laboratories (MED): 15 Number of Laboratories (Shared with IE Deptt.): 3 Sr. No Name of Laboratory (Staff Names- Qualification) Lab(s) of Course(s) Conducted in the Lab. Type(s) of Workstations (No. of each type) Nature of Experiments No. of Students per Workstation 1 Engineering Mechanics 1.Engr. Sana Zulfiqar - Lab Incharge- (MS) 2:Mr. M. Ahmed - Lab Engineer (MSc) 3:Mr. Manzoor Ahmad (Middle) 1.Engineering Statics 2. Engineering Dynamics. 1.Smooth Inclined Plane 2.Screw Jack 3.Angular Momentum 4.Fly Wheel 5.Worm & Worm Wheel 6.Weston Differential Pulley 7.Linear & Angular Speed 8. Derrick Crane 9. Principle of Equilibrium 10. Coplanar Concurrent Forces 11. Cord & Drum 12. Polygon of Forces 13. Laws of Friction 14. Tension in a Hanging Rope. 15. Hook's Law 16. Roof Truss 17. Centrifugal force apparatus.

2 2 Thermodynamics 1: Mr. M. Kashif Iqbal Lab Engineer (BSc) 2: Mr. M. Tariq Ayaz Lab Supervisor (DAE/BA) 3: Mr. M. Siddique - Lab Attendant 3 Drawing Hall 1: Engr. M.Uman - Lab Incharge (MSc) 3: Mr. Mehran Gulzar (D.A.E) 1-Thermodynamics I 2- Thermodynamics - II 3- Power Plants 4- I.C. Engines 1- Engineering Drawing & Graphics 1. Nozzle Performance Study (Model: HM 260 / Gunt Germany) 2. Air Compressor Study Unit (Model: WT-01/SOLTEQ Malaysia) 3. Single Cylinder Steam Engine (Model: ET810/Gunt/Germany) 4. Engine Test Bed (Model: TH03/SOLTEQ/Malaysia) 5. Thermoelectric Heat Engine (Model: P5687/CUSSONS/Eng.) 6. Slow Speed Diesel Engine (Model: PECO/PK) 7. Car Sectioned Model (Model: SEADA/1100/England) 8. Marcet Boiler (Model: P5700/CUSSONS/England) 9. Dead Weight Pressure Gauge Calibrator (Model: Student Project) 10. Turbo Jet Engine Model (Model: Germany) Stroke Petrol Engine Model (Model: KNECO Scientific Japan) Stroke Petrol Engine Model (Model: KNECO Scientific Japan) Stroke Diesel Engine Model (Model: KNECO Scientific Japan) 14. Yamaha Sectioned Engine Model 15. Steam Engine Model (Model: KNECO Scientific Japan) 16. Steam test Bench (Model: P3740/101/CUSSONS/England) * 18. Stirling Cycle Hot Air Engine (Model: P5691/CUSSONS/Eng.) * 1. Working Tables Demonstration 1 per table

3 4 Mechanics of Materials 1: Engr. Abdul Mobeen - Lab Incharge (MSc) 2: Mr. Allah ditta Anjum -Lab supervisor (D.A.E) 3: Mr.Hameed 1- Mechanics of Materials - I 2- Mechanics of Materials - II 01. Rubber Block 02. Study of spring 03. Twist and Bend Test Machine (MT-210) 04. Fatigue Test Machine (MT- 205) 05. Beam Deflection 06. Universal Testing Machine (SM-100) * 07. Creep Measurement (SM-107) 08. Deflection of Curved Bar 09. Compound Shaft 10. for investigating Hook's Law 11. Shear Force and Bending Moment 12. Eccentrically Loading Ties 13. Rubber in Shear 14. Moment of Inertia 15- Extension and Compression of Spring (Packed)

4 5 Fluid Mechanics & Hydraulics 1: Dr. M. Shehryar - Lab Incharge (PhD) 2: Engr. Abdul Rehman - Lab Engineer (BSc) 3: Mr. Zeeshan Ali (BSc) 1- Fluid Mechanics - I 2- Fluid Mechanics - II 3- Gas Dynamics 1. Compressible Flow Bench (Model: Arm field Tech. Edu.) 2. Depth of Center of Pressure (Model: Student Project) 3. Meta Centric Height (Model: HM ) 4. Bernoulli's Principle (Model: HM ) 5. Series/Parallel Operation of Twin Centrifugal Pump (Model: /Gunt) 6. Francis Turbine (Model: HM /Gunt) 7. Pelton Turbine (Model: HM /Gunt) 8. Impulse Turbine with Data Acquisition System (Model: HM 291 / Gunt) * 9. Reaction Turbine with Data Acquisition System (Model: HM 288 / Gunt) * 10. Turbine Service Unit (Model: HM 290/Gunt) * 11. Basic Hydraulic Bench (Model: HM 150/Gunt) 13. Education Wind Tunnel (Model: HM 170/Gunt) 14. Dead Weight Piston Gauge (Model: HM /Gunt) 15. Flow Visualization (Model: F14.MK2-A Arm field) 16. Free/Forced Vortex (Model: HM /Gunt)

5 6 Mechanics of Machines 1: Engr. S. M. Asif Raza - Lab Incharge (MS) 2: Mr. Allah Ditta Anjum - Lab Supervisor (DAE) 3: Mr. Abdul Hameed 1. Mechanics of Machines - I 2. Mechanics of Machines - II 1. Machine Efficiency 2. Compound Wheel & Axle Screw Jack 4. Thread Efficiency 5. Belt Friction Tester 6. Clutch Plate 7. Governor 8. Flywheel 9. Static Dynamic Balancing TM Ackermann Steering Demonstrator 11. Cam and following Mechanism 12. Belt Friction 13. Worm and Worm Wheel 14. Fly Wheel 15. Winch Model 16. Critical speed investigating control box 17. Hook s coupling apparatus 18. Motorized Gyroscope 7 Modelling & Simulation 1: Dr. Abid Hussain - Lab Incharge (Phd) 3:Mr. Kamran Safdar - J. Programmer (MCS) 4:Mr. M. Shakeel 1- Control Engineering (MATLAB) 2- Finite Element Methods (ANSYS) 3- CAD/CAM (ABAQUS) 4- Machine Design (PRO/E) Computer Core i5 PC's 2. 1 Laser HP Printer Computer 8 core i7 18 core i7 4 core i5 * 4. 1 office computer core i5 Demonstration 1 per PC

6 8 Refrigeration & Air Conditioning - Heat Transfer 1:Dr. Hafiz M. Ali - Lab Incharge (PhD) 2:Engr. Sallah ud din - Lab Engineer (BSc) 3:Mr. Manzoor Ahmed 1- Refrigeration & Air Conditioning 2- Heat & Mass Transfer 1. Refrigeration Fault Finding Simulator 2. Reverse Cycle Air Conditioning Trainer 5. Heat Conduction 6. Free & Forced Convection Heat Transfer 7. Thermal Radiation 8. Heat Exchanger 9. Water Cooling Tower (Not commissioned Not issue) 10. Vehicular Air Conditioning. 11. Thermal conducting of Building material.

7 9 Fracture Mechanics & Fatigue 1:Dr. Nazeer Ahmed Anjum - Lab Incharge (PhD) 2:Mr. Qaiser Mehmood - Lab Supervisor (DAE) 3:Mr. Asad Maqsood 1- Engineering Materials 2- Mechanical Vibrations 3- Stress Analysis 1. M.T.S (Material Test System) (Model: 810/USA) 2. Pure Bending Testing Machine (Model: PQ-6/China) 3. Electric Discharge Machine (Model: M-50/Thailand) 4. Wire Cut Machine (Model: DK- 7740/China) 5. Cooled Incubator (Model: Vt9620/PCSIR) 6. Vertical Universal Friction and Wear Testing Machine (Model: MM-WIA/Time Group Inc. China) 7. Optical Hardness Tester (Model: HBRUV-187.5) 8. Electric ARC Welding Plant (Model: PK) 9. Gas Welding (Model: H315FC) 10. Tig Welding Plant (Model: RIL TIG315AC/DC/Riland) 11. Electric Furnace (Model: HF3/VECST-UK) 12. Impact Testing Machine (Model: JBW-300/Time Group Inc. China) 12. Hydraulic Test (Model: PVM022BIUBI SAY/China) 14. Abrasion Tester (Model: Project MS) 15. Optical Microscope (Model: PK) 16. Metallurgical Microscope (Model: BX-RLA2/Tokyo Japan) 17. Strain Gauge Calibration (Model: (FL-102) Gunt Hamburg/Germany) 18. Trainee Strain Gauge Kit (Model: (FL-100) Gunt Hamburg/Germany) 19. Polariscope (Model: (FL-200) Gunt Hamburg / Germany) 20. Creep Measurement (Model: SM 106/TQ England) 21. Mechanical Vibration (Model:

8 TM-105/Gunt Hamburg / Germany) 22. SEM (Scanning Electron Microscope) 23. Boroscope 24. Vibration Meter (Model: VM- 1970) 25. Bearing Checking Meter 26. High Speed Camera (Model: i- speed 2/Olympus) 27. X-Y Recorder (Model: DAS 1200/Sefram Instruments & System/France) 28. Digital Storage Oscilloscope (Model: GPS-1072B/UK) 29. Buffing Machine (Model: BUFF /PK) 30. Tube furnace (Material Department) 31. Centrifuge (Not Commissioned) 32. Magnetic stirrer hot plate 33. Pin on disc wear test RIG 10 CAD-II Lab 1:Dr.Waqar Ahmed Qureshi -Lab Incharge (Phd) 2.Engr. Rizwan Saeed - Lab Supervisor 3.Mr. M. Zahoor -Lab Attendant (Middle) 1- Engineering Economics & Optimization 2- Energy Resource Utilization 1. PCs with Engineering Soft wares (Auto CAD, Pro. E, Ansys etc.) Core i7 Demonstration 2 per PC 11 Composite Materials & Smart Structures 1. Dr. M. Ali Nasir - Lab Incharge (Phd) 2.Mr.M. Umaish - Lab supervisor (MSc) 3. Mr.M Abid - Lab attendant (BA) Engineering Materials Thermal chamber for thermal analysis 2. Oven 3. Vacuum Pump Research Work 3 to 4

9 12 Energy Lab Dr. Tanzeel ur Rashid - Lab Incharge Mr. M. Sohail 1- Renewable Energy Technologies 2- Measurement and Instrumentation 1. Solar Radiation Monitoring System 2. Weather Station 3. Artificial Sun Simulator 4. Solar PV System 5. Solar Water Heater 6. Doppler Flow meter 7. Thermal Imager 8. Multi Turbine Test Set 9. Thermo Static Baths 10. Pumps 11. Solar Air Conditioning system (Research Project) 5 to 6 13 Advance Imaging & Microscopy Development 1.Dr. Ali NAsir -Lab incharge (PhD) 2.Mr. Qaiser Mehmood -Lab Supervisor (DAE) 1. Scanning Electron Microscope 2. Optical Microscope Metallurgical 3. Boroscope 4. High Speed Camera Mega Pixel Camera 5 to 6 14 Measurement & Control Lab 1.Engr. S.M Asif Raza -Lab Incharge (MS) 2.Muhammad Habib (BSc) -Lab Engineer 1.Control Engineering 2. Measurement & Instrumentation 1. Twin Rotor Memo System 2. Motorised Gyro Scope 3. Critical Speed Investigation System 4. Transducer and Instrument Trainer Demonstration 5 to 6 15 Fluid Structure Interaction (FSI)Lab 1.Dr. M. Shehryar -Lab Incharge (PhD) 2. Engr. Ibrahim Khalid (MSc) -Lab Engineer Gas Dynamics 1.Subsonic wind Tunnel 2. Supersonic Wind Tunnel Demonstration 5 to 6

10 16. CAD-II 1. Dr. Muhammad Ali Nasir -Lab Incharge 2. Engr. Rizwan Saeed -Lab Engineer 3. Muhammad Zahoor -Lab Assistant 1. Engineering Drawing 2. Computer System & Programming Computers Core i5 4 GB RAM 2. Auto CAD 3. Programming Demonstration 2 Per PC

Programme area 4a. Fluid Energy Machines

Programme area 4a. Fluid Energy Machines Programme area 4a Fluid Energy 136 Contents: Fundamentals of Fluid Mechanics 138 Thermodynamics 140 Mechanics / Other 142 Power Engines Hydroturbines Pelton...143 Francis...144 others...145 Steam Turbines...146

More information

L15 Dynamics & Vibration Laboratory

L15 Dynamics & Vibration Laboratory LABORATORY PLANNING GUIDE L15 Dynamics & Vibration Laboratory Content Covered subjects according to the curriculum... 2 Main concept... 3 Initial training provided for laboratory personnel... 3 Requirements

More information

Motor Vehicle Engineering

Motor Vehicle Engineering Motor Vehicle Engineering 25 It deals with the design and maintenance of a motor vehicle and its accessories. The main courses in this stream are: IC Engine & Reciprocating Machine Motor Vehicle Engineering

More information

Department of Mechanical Engineering University of Engineering & Technology Lahore(KSK Campus).

Department of Mechanical Engineering University of Engineering & Technology Lahore(KSK Campus). Department of Mechanical Engineering University of Engineering & Technology Lahore(KSK Campus). LAB DATA Lab Incharge: Engr. Muhammad Amjad Lab Assistant: Abbas Ali Lay-Out of Mechanics of Machines Lab

More information

Faculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students

Faculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students Sl. No. Faculty of Mechanical Engineering (R 203) Semester III CE635 STRENGTH OF MATERIALS LABORATORY (R) (A) Deficiency (R - A). Universal Tensile Testing machine with double shear attachment 40 Ton Capacity

More information

UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI COURSE STRUCTURE. (W.E.F Batch Students) (Total Unit 7.5) Sessional Unit Code

UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI COURSE STRUCTURE. (W.E.F Batch Students) (Total Unit 7.5) Sessional Unit Code COURSE STRUCTURE (W.E.F. 2011 Batch Students) (Total Unit 7.5) Course Theory Unit Course Sessional Unit Code Code DAE 4001 Thermal Engineering 1.0 DAE 4002 Thermal Engineering Lab. 0.5 DAE 4003 Fluid Mechanics

More information

TYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces.

TYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces. MM 500-001 BASIC PANEL The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories

More information

DEENBANDHU CHOTURAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (DEPARTMENT OF MECHANICAL ENGINEERING) List of Equipments/Apparatus: SOM LAB.

DEENBANDHU CHOTURAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (DEPARTMENT OF MECHANICAL ENGINEERING) List of Equipments/Apparatus: SOM LAB. DEENBANDHU CHOTURAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (DEPARTMENT OF MECHANICAL ENGINEERING) List of Equipments/Apparatus: SOM LAB. Sr. Nos. Name of items Qty. 1. Brinell hardness testing m/c

More information

NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES

NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES S.No 1 Name of the Laboratory ENGINEERING PRACTICES Total Area of Lab 62.0

More information

STATIC AND DYNAMICS. Two Year Warranty

STATIC AND DYNAMICS. Two Year Warranty FORCES HI-TECH Education is a market leader in the manufacture and provision of teaching equipment for Universities and Technical Colleges worldwide for both degree and vocational level. It has been designing

More information

HYDRAULICS. H89.8D - Hydraulic Bench

HYDRAULICS. H89.8D - Hydraulic Bench HYDRAULICS H89.8D - Hydraulic Bench 1. General The H89.8D and ancillary equipment have been developed to provide a comprehensive range of experiments in fluid mechanics. The bench is of robust construction

More information

Measurements Lab (620451):

Measurements Lab (620451): Measurements Lab (620451): To introduce the practical side of actuators and sensors, also helping to understand how that device can be used. 1. INTRODUCTION FOR MEASURMENT 2. NOISE MEASUREMENT 3. PIEZO-ELECTRIC

More information

Aircraft Propulsion Technology

Aircraft Propulsion Technology Unit 90: Aircraft Propulsion Technology Unit code: L/601/7249 QCF level: 4 Credit value: 15 Aim This unit aims to develop learners understanding of the principles and laws of aircraft propulsion and their

More information

DYNAMICS LABORATORY. AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system.

DYNAMICS LABORATORY. AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system. DYNAMICS LABORATORY AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system. OBJECTIVES: To supplement the principles learnt in kinematics and Dynamics of Machinery. To

More information

Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING

Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,

More information

Faculty of Mechanical Engineering B.E. Automobile Engineering (R 2013) Semester III

Faculty of Mechanical Engineering B.E. Automobile Engineering (R 2013) Semester III . (R 03) Semester III AT63 AUTOMOTIVE COMPONENTS LABORATORY Multi Cylinder Petrol Engine. 3. 4. 5. 6. 7. 8. 9. 0. Multi Cylinder Diesel Engine Petrol and Diesel fuel systems each Heavy duty vehicle chassis

More information

Review Paper on Design and Development of Coupling Torque Endurance Test Machine with Variable Torque and Chamber Adjustment

Review Paper on Design and Development of Coupling Torque Endurance Test Machine with Variable Torque and Chamber Adjustment Review Paper on Design and Development of Coupling Torque Endurance Test Machine with Variable Torque and Chamber Adjustment 1. Mr. Borude S.C.(P.G. Student, JSPM s ICOER, Pune), 2.Prof. Biradar N.S.(HOD

More information

ME2301 THERMAL ENGINEERING L T P C OBJECTIVE:

ME2301 THERMAL ENGINEERING L T P C OBJECTIVE: ME2301 THERMAL ENGINEERING L T P C 3 1 0 4 OBJECTIVE: To integrate the concepts, laws and methodologies from the first course in thermo dynamics into analysis of cyclic processes To apply the thermodynamic

More information

05 Marks (c) Sketch and explain Lancashire Boiler.

05 Marks (c) Sketch and explain Lancashire Boiler. Model question paper No.1 1. Answer any FIVE full questions choosing at least two questions from part A & two questions from part B 2. Use of steam tables is permitted 1. (a) Discuss briefly the different

More information

Performance Test On 2 Stroke Petrol Engine Lab

Performance Test On 2 Stroke Petrol Engine Lab Performance Test On 2 Stroke Petrol Engine Lab Manual LABORATORY MANUAL To prepare variable speed performance test of a multi-cylinder Describe the working principle of 2-Stroke petrol Engine? 2. Performance

More information

Our test laboratory - Apparatebau Kirchheim-Teck GmbH

Our test laboratory - Apparatebau Kirchheim-Teck GmbH 1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity

More information

Brake Test On Three Phase Induction Motor Lab Manual

Brake Test On Three Phase Induction Motor Lab Manual Brake Test On Three Phase Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase Slip.

More information

Hours / 100 Marks Seat No.

Hours / 100 Marks Seat No. 17412 16117 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)

More information

gunt GUNT-FEMLine Fluid energy machines HM 365 Series for studying fluid machinery Equipment for engineering education

gunt GUNT-FEMLine Fluid energy machines HM 365 Series for studying fluid machinery Equipment for engineering education Equipment for engineering education Fluid energy machines A series for studying fluid machinery In the GUNT product range, FEM stands for the German term Fluid Energie Maschinen, which means fl uid machinery.

More information

Heat engine. Heat engine

Heat engine. Heat engine Heat engine Device that transforms heat into work. It requires two energy reservoirs at different temperatures An energy reservoir is a part of the environment so large wrt the system that its temperature

More information

UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI

UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI COURSE STRUCTURE SEMESTER V (Total Unit 7.0) Course Code Theory Unit Course Code Sessional Unit DMM 5001 Automobile Engineering 1.0 DMM 5002 Automobile Engineering 0.5 Lab. DMM 5003 CAD/CAM 1.0 DMM5004

More information

R10 Set No: 1 ''' ' '' '' '' Code No: R31033

R10 Set No: 1 ''' ' '' '' '' Code No: R31033 R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DYNAMICS OF MACHINERY (Common to Mechanical Engineering and Automobile Engineering) Time: 3 Hours Max Marks:

More information

DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop)

DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop) DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) S.No. Name of Article 1 Bench Vice 2 V block 3 Spanner Set 4 File Flat 5 Hacksaw Frame 6 Combination Set 7 Center Punch 8 Dial

More information

Automobile. Automobile> Automobile Educational System>Automotive Engine Automobile> Automobile Educational System>Automotive Transmission...

Automobile. Automobile> Automobile Educational System>Automotive Engine Automobile> Automobile Educational System>Automotive Transmission... Automobile Automobile> Automobile Educational System>Automotive Engine... 3 Automobile> Automobile Educational System>Automotive Transmission... 6 Automobile> Automobile Educational System>Automotive Brake...

More information

SPECIFICATION. CRANE Specification. CARRIER Specification

SPECIFICATION. CRANE Specification. CARRIER Specification CRANE Specification Description Model KATO FULLY HYDRAULIC ALL TERRAIN CRANE KA-1300SL Maximum lifting capacity 130ton 2.5m Boom length 11.8m 52.0m (6 section) SL jib length 9.2m-26.6m ( section) Hoisting

More information

Index for Labs under Civil Engineering

Index for Labs under Civil Engineering Index for Labs under Civil Engineering Sr. No. Laboratory Name 1 Applied Mechanics Laboratory- 1 2 Transportation Engineering Laboratory 3 Surveying Laboratory 4 Environmental Engineering Laboratory-2

More information

Introduction Pulleys are similar to rollers but without bearings or rotating parts inside. They are placed in the front and rear of the conveyor and p

Introduction Pulleys are similar to rollers but without bearings or rotating parts inside. They are placed in the front and rear of the conveyor and p PULLEYS 43-52 Introduction Pulleys are similar to rollers but without bearings or rotating parts inside. They are placed in the front and rear of the conveyor and provide traction to the belt. Applications

More information

BIMEE-007 B.Tech. MECHANICAL ENGINEERING (BTMEVI) Term-End Examination December, 2013

BIMEE-007 B.Tech. MECHANICAL ENGINEERING (BTMEVI) Term-End Examination December, 2013 No. of Printed Pages : 5 BIMEE-007 B.Tech. MECHANICAL ENGINEERING (BTMEVI) Term-End Examination December, 2013 0 0 9 0 9 BIMEE-007 : ADVANCED DYNAMICS OF MACHINE Time : 3 hours Maximum Marks : 70 Note

More information

III EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY

III EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY Sl No Faculty of Mechanical Engineering BE Robotics and Automation (R 2013) Semester III EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY 1 0 30V RPS 12 2 0 50V RPS 2 3 0 5V RPS 2 4 0 30V Voltmeter 10

More information

Al- Ameen Engg. College. Fluid Machines. Prepared by: AREEF A AP/ ME AL AMEEN ENGINEERING COLLEGE Shoranur.

Al- Ameen Engg. College. Fluid Machines. Prepared by: AREEF A AP/ ME AL AMEEN ENGINEERING COLLEGE Shoranur. Fluid Machines Prepared by: AREEF A AP/ ME AL AMEEN ENGINEERING COLLEGE Shoranur Classification of hydraulic machines HYDROULIC MACHINES (I) Hydraulic Turbines A hydraulic machine which converts hydraulic

More information

didactecsanderson Mechanical & Automotive mechanisms MAM Mechanical Engineering Laboratory Apparatus Mechanical Engineering Laboratory Apparatus

didactecsanderson Mechanical & Automotive mechanisms MAM Mechanical Engineering Laboratory Apparatus Mechanical Engineering Laboratory Apparatus 2-YRWARRANTYONALLARMFIELDPRODUCTS DISCOVER WITH didactec Sanderson Mechanical Engineering Laboratory Apparatus Mechanical & Automotive mechanisms MAM Mechanical Mechanisms Automotive Mechanisms Theory

More information

III B.Tech I Semester Supplementary Examinations, May/June

III B.Tech I Semester Supplementary Examinations, May/June Set No. 1 III B.Tech I Semester Supplementary Examinations, May/June - 2015 1 a) Derive the expression for Gyroscopic Couple? b) A disc with radius of gyration of 60mm and a mass of 4kg is mounted centrally

More information

EE 842: ELECTRIC POWER SYSTEM IV (3-1-0) Full marks: Theory 100 Sessional=75

EE 842: ELECTRIC POWER SYSTEM IV (3-1-0) Full marks: Theory 100 Sessional=75 EE 842: ELECTRIC POWER SYSTEM IV (3-1-0) Full marks: Theory 100 Sessional=75 1. Thermal Power Plant: Thermal power plant economical, and ecological. Line diagram of thermal power plant- Boiler: classifications

More information

UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI. COURSE STRUCTURE (W.E.F Batch Students) (Total Unit 7.0) Theory Unit Course Code

UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI. COURSE STRUCTURE (W.E.F Batch Students) (Total Unit 7.0) Theory Unit Course Code COURSE STRUCTURE (W.E.F. 2011 Batch Students) (Total Unit 7.0) Course Code Theory Unit Course Code Sessional Unit DAE 5001 Automobile Engine II 1.0 DAE 5002 Automobile Engine II Lab 0.5 DAE 5003 DAE 5005

More information

R.K. Scientific & Engg. Works

R.K. Scientific & Engg. Works Fax No. : 01332-274252 Phone (Office & Res.): 01332-274252 Factory: 09634174252 Mobile: 09412919764 E-mail: rkscientific@rediffmail.com E-mail: rkscientific@gmail.com Web : www.rkscientific.com R.K. Scientific

More information

KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING. Question Bank. UNIT-I THERMODYNAMIC CYCLES Part-A (2 Marks)

KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING. Question Bank. UNIT-I THERMODYNAMIC CYCLES Part-A (2 Marks) KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING Question Bank Sub. Code/Name: ME1351 - THERMAL ENGINEERING Year/Sem: III/VI 1. What is a thermodynamic cycle? UNIT-I THERMODYNAMIC CYCLES

More information

MAGTROL. WB/PB 65 Series Eddy-Current and Powder Dynamometers. WB/PB 65 Data Sheet. Features. Description. Applications

MAGTROL. WB/PB 65 Series Eddy-Current and Powder Dynamometers. WB/PB 65 Data Sheet. Features. Description. Applications MAGTROL Data Sheet Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum Torque from N m to 50 N m (7.3 lb ft to 36 lb ft) Braking Power:.5 kw to 2 kw Stable Braking Torque, without

More information

MAGTROL. WB/PB 2.7 Series Eddy-Current and Powder Dynamometers. WB/PB 2.7 Data Sheet. Features. Description. Applications

MAGTROL. WB/PB 2.7 Series Eddy-Current and Powder Dynamometers. WB/PB 2.7 Data Sheet. Features. Description. Applications MAGTROL WB/PB 2.7 Data Sheet WB/PB 2.7 Series Eddy-Current and Powder Dynamometers Features 9 Models with Maximum Torque from 300 mn m to 2400 mn m (42 oz in to 340 oz in) Braking Power: 20 W to 1 kw Stable

More information

Instruction sheet

Instruction sheet 06/05-Hke/Sel Instruction sheet 388 182 Hot-air engine (388 182) 1 Description The hot-air engine is a reproduction of the Stirling engine optimized for educational purposes. Its cylinder and the displacement

More information

UNIVERSITY OF ENGINEERING AND TECHNOLOGY TAXILA EXAMINATIONS BRANCH

UNIVERSITY OF ENGINEERING AND TECHNOLOGY TAXILA EXAMINATIONS BRANCH UET/Exams/2014-CP/Second Semester/Spring-2015/2015/192 Dated: 02-09-2015 Page 1 of 5 UNIVERSITY OF ENGINEERING AND TECHNOLOGY TAXILA EXAMINATIONS BRANCH Result of BSc Second Semester Spring-2015 (24-03-2015

More information

MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)

MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016) MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE

More information

Additional examination-style questions

Additional examination-style questions 1 Figure 1 shows a remote-control camera used in space for inspecting space stations. The camera can be moved into position and rotated by firing thrusters which eject xenon gas at high speed. The camera

More information

GOVERNMENT ENGINEERING COLLEGE, GODHRA

GOVERNMENT ENGINEERING COLLEGE, GODHRA Practical No. - 1 To understand construction and working of various types of Steam boilers. 1) What is the function of Steam boiler? And what are factors should be considered while selecting a boiler?

More information

Faculty of Mechanical Engineering B.E. Marine Engineering (R 2013) Semester III FLUID MACHINERY LABORATORY

Faculty of Mechanical Engineering B.E. Marine Engineering (R 2013) Semester III FLUID MACHINERY LABORATORY Faculty of Mechanical Engineering B.E. Marine Engineering (R 23) Semester III MV63 MARINE HYDRAULICS AND FLUID MACHINERY LABORATORY Requirements for a batch of 30 students FLUID MECHANICS LABORATORY. 2.

More information

Optimal Sizing, Modeling, and Design of a Supervisory Controller of a Stand-Alone Hybrid Energy System

Optimal Sizing, Modeling, and Design of a Supervisory Controller of a Stand-Alone Hybrid Energy System Optimal Sizing, Modeling, and Design of a Supervisory Controller of a Stand-Alone Hybrid Energy System Mohamed El Badawe Faculty of Engineering and Applied Science Memorial University of Newfoundland,

More information

CO3 CO8 CO9 CO1 CO3 CO5

CO3 CO8 CO9 CO1 CO3 CO5 CO9 AUTOMOBILE ENGINEERING 15 AU32 - MATEIAL SCIENCE AND METALLURGY Explain different types of material crystal structures and arrangement of atoms. Describe various mechanical properties of materials.

More information

Cross Flow Heat Exchanger H352

Cross Flow Heat Exchanger H352 Cross Flow Heat Exchanger H352 H352 Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced Convection Heat Transfer

More information

BASIC CIVIL & MECHANICAL ENGINEERING

BASIC CIVIL & MECHANICAL ENGINEERING SHRI ANGALAMMAN COLLEGE OF ENGINEERING AND TECHNOLOGY (An ISO 9001:2000 Certified Institution) SIRUGANOOR, TIRUCHIRAPPALLI 621 105 DEPARTMENT OF MECHANICAL ENGINEERING FS81504 BASIC CIVIL & MECHANICAL

More information

Department of Mechanical Engineering Name of Lab: - Power Engineering

Department of Mechanical Engineering Name of Lab: - Power Engineering Name of Lab: - Power Engineering Major Equipment s 1 Reciprocating Air Comp. 2 Steam Engine Model (10165) 3 Model Of 2-Stroke Petrol Engine (10211) 4 Model Of 4-Stroke Petrol Engine (10212) 5 Model Of

More information

DEPARTMENT OF MECHANICAL ENGINEERING. 6 th Semester

DEPARTMENT OF MECHANICAL ENGINEERING. 6 th Semester jk"vªh; izks ksfxdh lalfkku] fetksje NATIONAL INSTITUTE OF TECHNOLOGY, MIZORAM (An Institute of National Importance under Ministry of HRD, Govt. of India) CHALTLANG, AIZAWL, MIZORAM 796012 Phone/Fax: 0389-2341699

More information

B.TECH III Year I Semester (R09) Regular & Supplementary Examinations November 2012 DYNAMICS OF MACHINERY

B.TECH III Year I Semester (R09) Regular & Supplementary Examinations November 2012 DYNAMICS OF MACHINERY 1 B.TECH III Year I Semester (R09) Regular & Supplementary Examinations November 2012 DYNAMICS OF MACHINERY (Mechanical Engineering) Time: 3 hours Max. Marks: 70 Answer any FIVE questions All questions

More information

SIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY :: PUTTUR (AUTONOMOUS) QUESTION BANK UNIT I I.C ENGINES

SIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY :: PUTTUR (AUTONOMOUS) QUESTION BANK UNIT I I.C ENGINES SIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY :: PUTTUR UNIT I I.C ENGINES 1 (a) Explain any six types of classification of Internal Combustion engines. (6M) (b) With a neat sketch explain any three

More information

Automotive. Automotive Body and Repair

Automotive. Automotive Body and Repair Automotive Body and Repair This program is designed to prepare the student for employment as a body repair and paint apprentice in privately owned repair shops or automotive dealerships. A student could

More information

UNC-Charlotte's Power Engineering Teaching lab

UNC-Charlotte's Power Engineering Teaching lab 1 UNC-Charlotte's Power Engineering Teaching lab B. Chowdhury Panel Session Title: Existing and Proposed Power Systems Laboratories for the Undergraduate Curriculum PES GM 2015 2 Outline Background - Energy

More information

LIST OF PRACTICAL FOR IX-X GRADES

LIST OF PRACTICAL FOR IX-X GRADES LIST OF PRACTICAL FOR IX-X GRADES Standard experiments 1 To measure the area of cross section by measuring diameter of a solid cylinder with vernier callipers. 2 To measure the volume of a solid cylinder

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115

More information

MAGTROL. WB/PB 115 Series Eddy-Current and Powder Dynamometers. WB/PB 115 Data Sheet. Features. Description. Applications

MAGTROL. WB/PB 115 Series Eddy-Current and Powder Dynamometers. WB/PB 115 Data Sheet. Features. Description. Applications MAGTROL WB/PB 5 Data Sheet WB/PB 5 Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum from 50 N m to 200 N m (36 lb ft to 47 lb ft) Braking Power: 5 kw to 30 kw Stable Braking,

More information

Climatic Wind Tunnel in Decatur Illinois Replicates Extreme Conditions

Climatic Wind Tunnel in Decatur Illinois Replicates Extreme Conditions AutomationMedia.com January, 2015 Climatic Wind Tunnel in Decatur Illinois Replicates Extreme Conditions by Thomas R. Cutler Predicting the weather and its consequences is not easy. Each year Weather.com

More information

ROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size.

ROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size. ROUGH TERRAIN CRANE CRANE Specifi cation Maximum lifting capacity 70ton 2.5m length (6 section) Fly jib length 8.3m-13.2m (2 section, offset 7 60 ) Maximum rated lifting height 45.5m () 58.6m (jib) Hoisting

More information

न शनल इ स ट ट य ट ऑफ फ उ ड र ए ड फ र ज ट क न ल र

न शनल इ स ट ट य ट ऑफ फ उ ड र ए ड फ र ज ट क न ल र न शनल इ स ट ट य ट ऑफ फ उ ड र ए ड फ र ज ट क न ल र (म नव स स धन ववक स म त र लय क तहत एक स व यत त स स थ न) National Institute of Foundry & Forge Technology (An Autonomous Body under the Ministry of Human

More information

AEROSTAR SOLUTIONS OUR MOTTO

AEROSTAR SOLUTIONS OUR MOTTO AEROSTAR SOLUTIONS AERONAUTICAL, MECHANICAL AND AUTOMOBILE PROJECTS FOR FINAL YEAR STUDENTS Aerostar solutions is one of the pioneer project centre which has been started by industrial professionals to

More information

Theory of Machines. CH-1: Fundamentals and type of Mechanisms

Theory of Machines. CH-1: Fundamentals and type of Mechanisms CH-1: Fundamentals and type of Mechanisms 1. Define kinematic link and kinematic chain. 2. Enlist the types of constrained motion. Draw a label sketch of any one. 3. Define (1) Mechanism (2) Inversion

More information

Universal Fluid Power Trainer (UFPT)

Universal Fluid Power Trainer (UFPT) Universal Fluid Power Trainer (UFPT) Milwaukee School of Engineering Applied Technology Center TM Department of Professional Education The UFPT is a modular, smart and unique fluid power and motion control

More information

Piling and drilling rig LRB

Piling and drilling rig LRB Piling and drilling rig LRB 15 51.4 Concept and characteristics LRB 15 Leader top Auxiliary winch Leader 1.5 m Vertical travel device Attachment with quick connection Inclination device Leader rotation

More information

FULLY HYDRAULIC TRUCK CRANE

FULLY HYDRAULIC TRUCK CRANE FULLY HYDRAULIC TRUCK CRANE CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Hoisting line speed Hoisting hook speed Main winch Truck crane

More information

MAGTROL. WB/PB 2.7 Series Eddy-Current and Powder Dynamometers. WB/PB 2.7 Data Sheet FEATURES DESCRIPTION MOTOR TESTING SYSTEMS APPLICATIONS

MAGTROL. WB/PB 2.7 Series Eddy-Current and Powder Dynamometers. WB/PB 2.7 Data Sheet FEATURES DESCRIPTION MOTOR TESTING SYSTEMS APPLICATIONS MAGTROL WB/PB 2.7 Data Sheet WB/PB 2.7 Series Eddy-Current and Powder Dynamometers FEATURES Models with Maximum Torque from 150 mn m to 2400 mn m (21 oz in to 340 oz in) Braking Power: 20 W to 1 kw Stable

More information

Electrical Machine Service. Overhaul, Conditioning, On-Site Service and Diagnostics. Excellent Technology, Efficiency and Quality

Electrical Machine Service. Overhaul, Conditioning, On-Site Service and Diagnostics. Excellent Technology, Efficiency and Quality World Class Power Solutions Excellent Technology, Efficiency and Quality Electrical Machine Service Overhaul, Conditioning, On-Site Service and Diagnostics 2 3 Your partner for Electrical Machine Service

More information

NPTEL. Mechanics of Textile Machinery - Web course. Textile Engineering. COURSE OUTLINE. Machine elements and drives

NPTEL. Mechanics of Textile Machinery - Web course. Textile Engineering.   COURSE OUTLINE. Machine elements and drives NPTEL Syllabus Mechanics of Textile Machinery - Web course COURSE OUTLINE Machine elements and drives Introduction to drives, selection of drives, primary machine elements, special purpose drives and devices

More information

Farhana Shirin Lina BSC.(Electrical and Electronic) Memorial University of Newfoundland & Labrador

Farhana Shirin Lina BSC.(Electrical and Electronic) Memorial University of Newfoundland & Labrador Farhana Shirin Lina BSC.(Electrical and Electronic) Memorial University of Newfoundland & Labrador Introduction Research Objectives Different Control Systems System Modeling and Control Controller Design

More information

Balancing and over-speed testing of flexible rotors

Balancing and over-speed testing of flexible rotors Balancing and over-speed testing of flexible rotors Installations for low- and high-speed balancing and for over-speed testing HS 16 - HS 34 Application Balancing of flexible rotors from turbo-machinery

More information

UNDERGROUND MINING. Mine hoist disc brake systems Improved safety, availability and productivity

UNDERGROUND MINING. Mine hoist disc brake systems Improved safety, availability and productivity UNDERGROUND MINING Mine hoist disc brake systems Improved safety, availability and productivity 2 MINE HOIST DISC BRAKE SYSTEMS IMPROVED SAFETY, AVAILABILITY AND PRODUCTIVITY Mine hoist disc brake systems

More information

pressure transducer Miniature pressure transducer model 81530

pressure transducer Miniature pressure transducer model 81530 Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters

More information

Module 2 : Dynamics of Rotating Bodies; Unbalance Effects and Balancing of Inertia Forces

Module 2 : Dynamics of Rotating Bodies; Unbalance Effects and Balancing of Inertia Forces Module 2 : Dynamics of Rotating Bodies; Unbalance Effects and Balancing of Inertia Forces Lecture 3 : Concept of unbalance; effect of unbalance Objectives In this lecture you will learn the following Unbalance

More information

- New Superpave Performance Graded Specification. Asphalt Cements

- New Superpave Performance Graded Specification. Asphalt Cements - New Superpave Performance Graded Specification Asphalt Cements 1 PG Specifications Fundamental properties related to pavement performance Environmental factors In-service & construction temperatures

More information

Advanced Auto Tech Worksheet Auto Trans & Transaxle Chapter 40 Pages Points Due Date

Advanced Auto Tech Worksheet Auto Trans & Transaxle Chapter 40 Pages Points Due Date Advanced Auto Tech Worksheet Name Auto Trans & Transaxle Chapter 40 Pages 1173 1215 107 Points Due Date 1. Automatic transmissions are operated by hydraulics as well as electronics to select according

More information

Cross Flow Heat Exchanger H352

Cross Flow Heat Exchanger H352 Cross Flow Heat Exchanger H352 H352 Cross Flow Heat Exchanger Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced

More information

Khushboo Scientific Private Limited

Khushboo Scientific Private Limited +91-8048602052 Khushboo Scientific Private Limited https://www.indiamart.com/khushbooscientific/ We are a distinguished Importer, Distributor, Exporter of Scientific. These products find application in

More information

MAGTROL. WB/PB 43 Series Eddy-Current and Powder Dynamometers. WB/PB 43 Data Sheet. Features. Description. Applications

MAGTROL. WB/PB 43 Series Eddy-Current and Powder Dynamometers. WB/PB 43 Data Sheet. Features. Description. Applications Data Sheet Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum Torque from.5 N m to 0 N m (. lb ft to 7.3 lb ft) Braking Power: 0.5 kw to 3 kw Stable Braking Torque, without Shock

More information

Design and Analysis of Arc Springs used in Dual Mass Flywheel

Design and Analysis of Arc Springs used in Dual Mass Flywheel Volume-2, Issue-1, January-February, 2014, pp. 35-41, IASTER 2014 www.iaster.com, Online: 2347-4904, Print: 2347-8292 Design and Analysis of Arc Springs used in Dual Mass Flywheel ABSTRACT 1 Govinda, A,

More information

How Multibody-System Simulation Models can Support the Design of Wind Turbines

How Multibody-System Simulation Models can Support the Design of Wind Turbines Fakultät Maschinenwesen, Institut für Maschinenelemente und Maschinenkonstruktion, Lehrstuhl Maschinenelemente How Multibody-System Simulation Models can Support the Design of Wind Turbines 4 th Wind and

More information

ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism)

ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism) ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism) 1) Define resistant body. 2) Define Link or Element 3) Differentiate Machine and Structure 4) Define Kinematic Pair. 5) Define Kinematic Chain.

More information

DEPARTMENT OF MECHANICAL ENGINEERING Question Bank ME THERMAL ENGINEERING. Part-A (2 Marks)

DEPARTMENT OF MECHANICAL ENGINEERING Question Bank ME THERMAL ENGINEERING. Part-A (2 Marks) DEPARTMENT OF MECHANICAL ENGINEERING Question Bank ME1351 - THERMAL ENGINEERING UNIT I GAS POWER CYCLES Part-A (2 Marks) 1. What is a thermodynamic cycle? 2. What is meant by air standard cycle? 3.. Name

More information

DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING

DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM (Applicable for Students admitted from Academic Year 2015-16) B. Tech. AUTOMOBILE ENGINEERING In Specialization with MOTORSPORT ENGINEERING SCHOOL OF MECHANICAL

More information

Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)

Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option) Boom Power Jib Boom (Stationary on rubber) Boom (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1

More information

FULLY HYDRAULIC TRUCK CRANE

FULLY HYDRAULIC TRUCK CRANE CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Main Hoisting line winch speed Auxiliary winch Main Hoisting winch speed Auxiliary winch

More information

GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping

GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without

More information

Electrical Power Systems 2014/15

Electrical Power Systems 2014/15 www.hft-education.com 2014/15 Electrical Power Engineering is fundamental to maintaining and protecting global electricity supply and preventing catastrophic power failures. With the current investment

More information

INITIAL DISTRIBUTION. Chief, Bureau of Ships, Project Records (324) Commander, U.S. Naval Ordnance Laboratory, White Oak, Silver Spring 19, Md.

INITIAL DISTRIBUTION. Chief, Bureau of Ships, Project Records (324) Commander, U.S. Naval Ordnance Laboratory, White Oak, Silver Spring 19, Md. _ R46 AA._.~.r........ NG$ 4.,. INITIAL DISTRIBUTION Copies Chief, Bureau of Ships, Project Records (324) 5 Project Records 1 Code 554 Commander, U.S. Naval Ordnance Laboratory, White Oak, Silver Spring

More information

Performance Testing of Composite Bearing Materials for Large Hydraulic Cylinders

Performance Testing of Composite Bearing Materials for Large Hydraulic Cylinders TECHNICAL Performance Testing of Composite Bearing Materials for Large Hydraulic Cylinders Leo Dupuis, Bosch-Rexroth Sr. Development Engineer Introduction Large hydraulic cylinders (LHCs) are integral

More information

Design, Analysis & Balancing of 5 Cylinder Engine Crankshaft

Design, Analysis & Balancing of 5 Cylinder Engine Crankshaft International OPEN ACCESS Journal Of Modern Engineering Research (IJMER) Design, Analysis & Balancing of 5 Cylinder Engine Crankshaft Yogesh S. Khaladkar 1, Lalit H. Dorik 2, Gaurav M. Mahajan 3, Anil

More information

SYLLABUS. osmania university. Force Analysis of Four-Bar and Slider Crank Mechanisms. CHAPTER - 2 : DYNAMIC FORCE ANALYSIS

SYLLABUS. osmania university. Force Analysis of Four-Bar and Slider Crank Mechanisms. CHAPTER - 2 : DYNAMIC FORCE ANALYSIS Contents i SYLLABUS osmania university UNIT - I CHAPTER - 1 : STATIC TIC FORCE ANALYSIS Force Analysis of Four-Bar and Slider Crank Mechanisms. CHAPTER - 2 : DYNAMIC FORCE ANALYSIS Force Analysis of Four-Bar

More information

L 298/70 Official Journal of the European Union

L 298/70 Official Journal of the European Union L 298/70 Official Journal of the European Union 16.11.2011 MODULE 12. HELICOPTER AERODYNAMICS, STRUCTURES AND SYSTEMS 12.1 Theory of Flight Rotary Wing Aerodynamics 1 2 Terminology; Effects of gyroscopic

More information

TEST REPORT. Ceram Reference: (QT21489/2/SL)/Ref: 1.0A. Tensile and Frictional Tests on the Fast Fit BeamClamp Systems.

TEST REPORT. Ceram Reference: (QT21489/2/SL)/Ref: 1.0A. Tensile and Frictional Tests on the Fast Fit BeamClamp Systems. TEST REPORT Ceram Reference: 121557 (QT21489/2/SL)/Ref: 1.0A Project Title: Tensile and Frictional Tests on the Fast Fit BeamClamp Systems Client: Kee Safety Limited For The Attention of: Mr Phil Higgs

More information

Heat Engines Lab 12 SAFETY

Heat Engines Lab 12 SAFETY HB 1-05-09 Heat Engines 1 Lab 12 1 i Heat Engines Lab 12 Equipment SWS, 600 ml pyrex beaker with handle for ice water, 350 ml pyrex beaker with handle for boiling water, 11x14x3 in tray, pressure sensor,

More information

GATE GATE 2019 Online Test Series. Compete with the best... shape these test series.

GATE GATE 2019 Online Test Series. Compete with the best... shape these test series. GATE 29 Online Te Series Compete with the be... t Our proficient faculties have done extensive research to prepare and shape these te series. t An opportunity for udents to come across their rengths and

More information