LASER PRINTABLE LABELS. Brady_HPI_ qxp :44 Page 127

Transcription

1 Brady_HPI_ qxp :44 Page 127 LASER PRINTABLE LABELS Laser Labels Printable Materials Chart Label Index by Part Number Label Index by Size Circuit Board and Component Idenfication Wire and Cable Marking Data Communications Equipment and Cabling Labels General Idenfication Labels

2 Brady_HPI_ qxp :44 Page 128 Laser Printable Material Chart The high resolution of laser printing makes it possible to generate readable, dense bar codes on labels small enough to fit into limited application space. (B-747 pictured) Max. Service Type Temp. C Colour Finish Use Special Properties Nylon Cloth B White Matt Aerospace and military cable marking Repositionable Paper B White/Colours Matt 110 terminal block marking for Available in green, purple, yellow, blue, telecommunications red, brown, white, orange and grey B White/Colours Matt Bar code and general labelling applications Excellent toner adhesion Polyolefin Film B White Matt Bar code labels and general identification Abrasion resistant B White Matt Tamper-evident label Label destroys upon removal B Clear/White Matt Wire and cable marking, self-laminating Low halogen and sulphur content B White Matt Electronic component labelling; Rough surface application; Stronger bond general identification to low surface energy plastics B White Matt Electronic component, bar code labels Removable and general temporary identification B Clear Matt Electronic component labelling; Rough surface application; Stronger bond general identification to low surface energy plastics B Clear Matt Rating plates, name plates, Translucent general-purpose printable overlaminate B White/Yellow Matt Electronic PCB component, bar code Excellent solvent and smudge resistance; labels and equipment labelling high-resolution printing; available in white only B Silver Matt Rating plates and electronic component marking Adheres to a variety of surfaces; metallized Polyimide B * Amber Matt Bottom PC board and SMT Withstands extremely high temperatures component marking Tedlar B White Matt Aerospace and military cable marking Repositionable Polypropylene B White Matt Rating plates and general-purpose labelling Excellent abrasion and smudge resistance Tedlar is a registered trademark of DuPont. * 5 minutes *These materials are UL recognized. *These materials are CSA approved. Halogen free DIN VDE 0472 Part 815 *Refer to the full page charts on pages for more information and complete listing of parts

3 Brady_HPI_ qxp :44 Page 129 Label Index by Part Number LaserTab Laser-Printable Labels Order Size Specifications Reference (mm) on Page LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT YL x LAT x LAT x LAT YL x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT YL x LAT x LAT YL x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT YL x LAT x LAT x LAT x LAT x LAT x LAT YL x LAT x LAT x LAT x LAT x LAT x LAT YL x LAT x LAT x LAT x LAT YL x LAT x LAT x LAT x LAT x LAT x LAT x LAT YL x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x Order Size Specifications Reference (mm) on Page LAT x LAT YL x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT YL x LAT x LAT x LAT x LAT x LAT YL x LAT x LAT x LAT YL x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT x LAT BL x LAT BR x LAT GR x LAT GY x LAT OR x LAT PL x LAT RD x LAT YL x LAT x LAT x LAT BL x LAT BR x LAT GR x Order Size Specifications Reference (mm) on Page LAT GY x LAT OR x LAT PL x LAT RD x LAT YL x LAT x LAT BL x LAT BR x LAT GR x LAT GY x LAT OR x LAT PL x LAT RD x LAT YL x European LaserTab Laser Printable Labels A4 Sheet Order Size Specifications reference (mm) on Page ELAT-3-747W x ELAT-4-747W x ELAT-4-747YL x ELAT x ELAT-7-747W x ELAT x ELAT-8-747W x ELAT-9-747W x ELAT x ELAT x ELAT W x ELAT YL x ELAT /00 x ELAT x ELAT x ELAT x ELAT YL x ELAT x ELAT x ELAT x ELAT W x ELAT YL x ELAT x ELAT W x ELAT YL x ELAT W x ELAT Y x ELAT W x ELAT W x ELAT x ELAT x ELAT x ELAT x ELAT W x ELAT W x ELAT YL x ELAT W x ELAT W x ELAT x ELAT x When performance matters most 129

4 Brady_HPI_ qxp :44 Page 130 Label Index by Size Multiple Labels Across LAT Laser Printable Package Quantity, Technology Die mm Material B-652, Amber Rating Plate Polyimide Order Reference Explanation Most BRADY Order Reference for computer printable labels follow the same four-part format: The first code indicates the technology, the second part is a number indicating the the die-sized (where applicable), the third part indicates the BRADY material used (where applicable), and the final code indicates package quantity. Pieces Labels Label Label Horizontal Top Left Labels Order Per Per Width Height Repeat Margin Margin Per Reference Package Material Colour Row A (mm) B (mm) C (mm) D (mm) E (mm) Sheet 6,35 mm Label Width LAT Polyimide Amber LAT White mm Label Width LAT Polyimide Amber LAT White mm Label Width LAT Polyimide Amber LAT White mm Label Width ELAT W White mm Label Width LAT Polyimide Amber LAT Removable White LAT White LAT / /5 000 Nylon Cloth White LAT / /2 500 Nylon Cloth White mm Label Width LAT Clear LAT Clear mm Label Width ELAT W White ELAT Y Yellow mm Label Width ELAT-3-747W White mm Label Width LAT Polyimide Amber LAT W Tedlar White LAT / / Tedlar White LAT YL Yellow LAT Nylon Cloth White LAT Polyolefin White LAT Polyimide Amber LAT White mm Label Width ELAT W White ELAT W White ELAT YL Yellow mm Label Width ELAT-4-747W White ELAT-4-747YL Yellow ELAT W White ELAT YL Yellow mm Label Width LAT Polyolefin White LAT Polyimide Amber LAT-4-737W Tedlar White LAT White LAT-4-747YL Yellow LAT Polyimide Amber LAT White LAT-5-747YL White Tedlar is a registered trademark of DuPont. Note: Labels are sorted by width, height, 3 digit material number (within reference)

5 Brady_HPI_ qxp :44 Page 131 Label Index by Size Pieces Labels Label Label Horizontal Top Left Labels Order Per Per Width Height Repeat Margin Margin Per Reference Package Material Colour Row A (mm) B (mm) C (mm) D (mm) E (mm) Sheet mm Label Width (Cont.) LAT Paper White LAT / /2 500 Nylon Cloth White mm Label Width ELAT-8-747W White ELAT White ELAT-7-747W White ELAT Metallised Silver mm Label Width LAT Polyimide Amber LAT White LAT Polyolefin White LAT Polyimide Amber LAT White LAT-8-747YL Yellow LAT Nylon Cloth White LAT Polyolefin White LAT Polyimide Amber LAT White LAT Removable White LAT Clear LAT W Tedlar White LAT YL Tedlar Yellow LAT White LAT-7-747YL Yellow LAT Metallized Silver LAT Nylon Cloth White LAT / /2 500 Nylon Cloth White mm Label Width ELAT Metallised Silver ELAT Metallised Silver ELAT Metallised Silver ELAT Metallised Silver mm Label Width ELAT Polyolefin White ELAT Polyolefin White mm Label Width LAT W Tedlar White LAT YL Tedlar Yellow mm Label Width ELAT-9-747W White mm Label Width LAT Polyolefin White LAT Polyimide Amber LAT Removable White LAT White LAT-9-747YL Yellow LAT Nylon Cloth White LAT Metallised Silver mm Label Width LAT Metallised Silver Tedlar is a registered trademark of DuPont. Note: Labels are sorted by width, height, 3 digit material number (within reference). When performance matters most 131

6 Brady_HPI_ qxp :44 Page 132 Label Index by Size Pieces Labels Label Label Horizontal Top Left Labels Order Per Per Width Height Repeat Margin Margin Per Reference Package Material Colour Row A (mm) B (mm) C (mm) D (mm) E (mm) Sheet mm Label Width ELAT White ELAT White ELAT W White ELAT YL White mm Label Width LAT Polyimide Amber LAT White LAT Polyolefin White LAT White LAT YL Yellow LAT Polyolefin White LAT Polyolefin White LAT White LAT Clear LAT White LAT Yellow LAT YL Paper White LAT Clear LAT White mm Label Width ELAT W White mm Label Width LAT White LAT W White LAT Paper White LAT White LAT W White LAT Paper White mm Label Width ELAT Clear ELAT YL Yellow ELAT Metallised Silver mm Label Width LAT White LAT Clear LAT W White LAT YL Yellow LAT Metallized Silver mm Label Width ELAT W White mm Label Width LAT White mm Label Width LAT Polyimide Amber LAT Removable White LAT White LAT YL Yellow LAT W White LAT Paper White LAT White LAT W White LAT Paper White mm Label Width LAT White Note: Labels are sorted by width, height, 3 digit material number (within reference)

7 Self-laminating Labels by Size When performance matters most 133

8 This job requires more memory than is available in this printer. Try one or more of the following, and then print again: For the output format, choose Optimize For Portability. In the Device Settings page, make sure the Available PostScript Memory is accurate. Reduce the number of fonts in the document. Print the document in parts.