Screw-in resistance thermometers. Connecting cable. Technical data. Data Sheet Page 1/5
|
|
|
- Garry Horton
- 5 years ago
- Views:
Transcription
1 Data Sheet Page 1/5 Screw-in resistance thermometers with connecting cable for temperatures from -50 to +400 C as single or twin resistance thermometer in 2-wire, 3-wire or 4-wire circuit connecting cable in PVC, silicone, Teflon or with metal braiding Screw-in resistance thermometers are mainly used for measuring temperatures in liquids and gases. An important selection criterion is their reliable sealing against both negative and positive pressures. Applications include HVAC, refrigeration, heating installations, ovens, furnaces and plant engineering. Depending on the version, the connecting cables are suitable for use in dry and humid areas within the temperature range -50 to +350 C. The junction between cable and protection tube incorporates strain relief. A cable protector can be supplied as an option. The measuring insert is normally fitted with a Pt100 temperature sensor to EN , Class B in 2-wire circuit. Versions with Pt500 or Pt1000 are also available. In addition, there is a choice of 3-wire or 4-wire circuit connections. Technical data Connection Connecting cable available with cable ends as: bare wires, with ferrules, receptacles or multipole connector PVC, ambient temperature -5 to +80 C (+105 C) silicone, ambient temperature -50 to +180 C Teflon, ambient temperature -190 to +260 C metal braiding, ambient temperature -50 to +350 C connecting cable can optionally be supplied with shielding Process connection thread, stainless steel Protection tube stainless steel (Type /30 Inconel ), 5mm, 5.4mm, 6mm and 8mm dia. Measuring insert Pt100 temperature sensor, EN , Cl. B, 2-wire circuit Response times t 0.5 approx. 2sec, t 0.9 approx. 6sec, in water 0.2m/sec, 6mm dia. Accessories pocket, see Data Sheet and
2 Data Sheet Page 2/5 Dimensions Type /10 Type /20 Type /30 Type /40
3 Data Sheet Page 3/ /10 Screw-in resistance thermometer with fixed screw fitting /20 Screw-in resistance thermometer with loose screw fitting x x to +400 C / metal braiding x x to +200 C / silicone x x to +260 C / Teflon x x to +400 C / metal braiding x x to +80 C / PVC x x to 105 C / PVC (only with 1 x 2-wire or 3-wire circuit) x x x Pt100 in 3-wire circuit x x x Pt100 in 2-wire circuit x x x Pt100 in 4-wire circuit x x x Pt100 in 3-wire circuit x x x Pt100 in 2-wire circuit x x 1 Class B (standard) x x 2 Class A x x 5 5mm x x 6 6mm (6) Fitting length EL in mm (50 EL 500) x 17 17mm x 37 37mm x x 50 50mm x x mm x mm x x mm x mm x x... please specify in plain text (50mm steps) x 102 thread 1/4"pipe x 104 thread 1/2"pipe x 114 thread M 10 x 1 x x 03 bare cable ends x x 11 ferrules to DIN Part 4 (standard) x x 13 receptacle 6.3 to DIN x x 80 multipole connector (please specify type in plain text) x x 99 to customer specification x x mm x x... please specify in plain text (500mm steps) x x 000 no extra code x x 310 stepped protection tube x x 315 cable protector: coil x x 316 cable protector: tube x x 317 shielded connecting cable Order example / / 000 1
4 Data Sheet Page 4/ /30 Screw-in resistance thermometer with loose screw fitting and stepped protection tube x to +200 C / silicone x x Pt100 in 3-wire circuit x x Pt100 in 2-wire circuit x 1 Class B (standard) x 2 Class A x mm dia. stepped down to 3.3mm (6) Fitting length EL in mm x mm x 114 thread M 10 x 1 x 03 bare cable ends x 11 ferrules to DIN Part 4 (standard) x 13 receptacle 6.3 to DIN x 80 multipole connector (please specify type in plain text) x 99 to customer specification x mm x... please specify in plain text (500mm steps) x 000 no extra code x 315 cable protector: coil x 316 cable protector: tube x 317 shielded connecting cable Order example / / 000 1
5 Data Sheet Page 5/ /40 Screw-in resistance thermometer, screw-in protection tube x to +200 C / silicone x to +300 C / metal braiding x to +80 C / PVC x to 105 C / PVC (only with 1 x 2-wire or 3-wire circuit) x x Pt100 in 3-wire circuit x x Pt100 in 2-wire circuit x 1 Class B (standard) x 2 Class A x 8 M 8 (6) Fitting length EL in mm x 25 25mm x 111 thread M 8 x 03 bare cable ends x 11 ferrules to DIN Part 4 (standard) x 13 receptacle 6.3 to DIN x 80 multipole connector (please specify type in plain text) x 99 to customer specification x mm x... please specify in plain text (500mm steps) x 000 no extra code x 315 cable protector: coil x 316 cable protector: tube x 317 shielded connecting cable Order example / / Stock versions: Sales No / / / / / / / / / / / / 315,317 90/ / / 315,317 90/ / / / / / 315,317 90/ / / 315,317 90/
Push-in RTD Temperature Probe with Connecting Cable
Data Sheet 902150 Page 1/6 Push-in RTD Temperature Probe with Connecting Cable Temperature range from -50 to +400 C As single or double RTD temperature probe In 2-wire, 3-wire or 4-wire-circuit Connecting
Resistance thermometers approved to DIN 34 40
Data Sheet 90.2006 Page 1/5 Resistance thermometers approved to DIN 34 40 for indirect heating installations to DIN 47 54 for temperatures up to 700 C as single, twin or triple resistance thermometer for
Screw-in resistance thermometers with plug connector
Data Sheet 90.2004 Page 1/8 s with plug connector for temperatures from -50 to +300 C highly resistant to shock and vibration connector locked in for reliable contact, IP65 or IP69K protection available
Contact Dial Thermometer
Data sheet 608523 Page 1/8 Contact Dial Thermometer Special features Class 1.5 Display range -40 C to +600 C Temperature controller with actual value display as built-in or add-on device in the stainless
ATEX/IECEx RTD temperature probe
Page 1/8 ATEX/IECEx RTD temperature probe with connecting cable acc. to DIN EN 60751 For temperatures from -100 to +600 C As single, double, or triple RTD temperature probe In two-wire, three-wire, or
Mineral-Insulated RTD Temperature Probe According to DIN EN 60751
ata Sheet 902210 Page 1/12 Mineral-Insulated RT Temperature Probe According to IN EN 60751 For temperatures from -50 (-200) to +600 C Flexible sheath cable with vibration-resistant measuring insert As
Screw-in melt RTD temperature probes
JUMO Instrument Co. td. Data sheet 90.2090 Page 1/5 Screw-in melt RTD temperature probes k Temperature range from -50 to +400 C k Various probe tips available k Stainless steel thermowell and probe tip
Cable Temperature QAP... Sensor. Use
1 831 1847P01 Cable Temperature Sensors QAP... Use The sensors are used in heating, ventilation and air conditioning plants to acquire the temperature. They are for use with the corresponding accessories
Screw-in RTD temperature probes with plug connector
Data sheet 902040 Page 1/6 s with plug connector Temperature range from -50 to +270 C Shakeproof design Application areas: utility vehicles, construction and agricultural machinery, motors, compressors
Screw-in melt thermocouples
JUMO Instrument Co. td. Data sheet 901090 Page 1/5 k Temperature range from -40... +600 C k Available with different thermocouples k Stainless steel thermowell and probe tip k Structure insulated or connected
Cable resistance thermometer Model TR40
Electrical temperature measurement Cable resistance thermometer Model TR40 WIKA data sheet TE 60.40 for further approvals see page 11 Applications For direct installation into the process Machine building
SAFETY INTERLOCK SWITCH CONSTRUCTED WITH DUAL RESTORATION SPRINGS FEATURES
SAFETY INTERLOCK SWITCH CONSTRUCTED WITH DUAL RESTORATION SPRINGS FEATURES mm inch or more is assured as insulation distance between contacts (Snap-in mounting and 3 Form A type) Durability of 100,000
Temperature sensors types MBT 153, MBT 120 and MBT 3260
Data sheet Temperature sensors types MBT 153, MBT 120 and MBT 3260 Universal cable temperature sensor Type MBT 153 For temperature measurement and regulation where reliable, robust and accurate equipment
Cable thermocouple Model TC40
Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 for further approvals see page 11 Applications For direct installation into the process Machine building Motors
Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar
Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter
Electronic Monitoring Systems
JJ Electronic digital thermometer JJ Multi-channel temperature indicator JJ Temperature sensors JJ KombiTemp Electronic Monitoring Systems and Temperature Sensors DS_Electronic_monitoring_systems_and_temperature_sensors
Resistance Thermometers Model TR602, for Flat Surfaces Model TR603, for Pipe Surfaces
Electrical Temperature Measurement Resistance Thermometers Model TR602, for Flat Surfaces Model TR603, for Pipe Surfaces WIKA Data Sheet TE 60.35 Application To measure surface temperatures on flat surfaces
Temperature Sensors for MARINE ABEE. Member Of
Temperature Sensors for MARINE ABEE Member Of Previous experience, Know-how of 40years of Sensor manufacturing Page 2 COPYRIGHT 2012 UTECO ABEE. ALL RIGHTS RESERVED. 7 Series BMR Thermocouple temperature
Installation Instructions
1 BD DODGE CUMMINS 03-09 C O O L - I T I N T E R C O O L E R Installation Instructions Application List 2003-2009 Dodge 24V 1042525 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION UNLESS AN EO# IS LISTED,
Contact dial thermometer
Data Sheet 608523 Page 1/8 Contact dial thermometer Special features Temperature controller with process value display as panel-mounting or add-on device Class 1.5 Protection rating IP 65 Case sizes :
Cable resistance thermometer Model TR40
Electrical temperature measurement Cable resistance thermometer Model TR40 WIKA data sheet TE 60.40 for further approvals see page 2 Applications For direct installation into the process Machine building
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head Pt100 probe with compact KNS terminal head Class B, 4 wire connection Various probe available lengths
Pressure Transmitter JUMO dtrans p30 Type
Data Sheet 40466 Page 1/6 Pressure Transmitter JUMO dtrans p0 Type 40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The
THERMASGARD TF 43 THERMASGARD TF 65
THERMASGARD TF 65 Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) THERMASGARD TF 43 is a resistance thermometer with a passive output, enclosure made from impact-resistant plastic
Thermocouples TE Measuring Insert. rigid Model TC 001 flexible Model TC 002. Electronic Temperature Measurement
TE 65.01 Thermocouples Measuring Insert Electronic Temperature Measurement rigid Model TC 001 flexible Model TC 002 Services intended Exchangeable measuring insert for all industrial and laboratory applications.
Data sheet chainflex CF8821
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE
Insertion thermometer With connection lead Model TF45
Temperature Insertion thermometer With connection lead Model TF45 WIKA data sheet TE 67.15 Applications Solar thermal systems, renewable energies Machine building Compressors Cooling, heating, ventilation
Cable resistance thermometer Model TR40
Electrical temperature measurement Cable resistance thermometer Model TR40 WIKA data sheet TE 60.40 further approvals see page 11 Applications For direct installation into the process Machine building
Temperature Sensors and Special Cables
A FEW WORDS ABOUT THIS CATALOGUE...4 Page 2 2012 UTECO...4 Series BMRM - Exhaust gas temperature sensors with solid drilled protection tube. For measuring and regulation exhaust gas, temperature in stationary
TEL-TRU MANUFACTURING COMPANY DIGITAL THERMOMETERS
TEL-TRU MANUFACTURING COMPANY DIGITAL THERMOMETERS www.sandelius.com ELECTRONIC DIGITAL THERMOMETERS Tel-Tru s DIGI-TEL Thermometers combine the easy, quick visual reference feature of a local indicator
Data sheet chainflex CF886
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Shield foil: Aluminium clad plastic foil 4. Banding: Plastic foil 5. Filling: Plastic yarns 6.
Electronic Monitoring Systems
JJ Electronic digital thermometer JJ Multi-channel temperature indicator JJ Temperature sensors JJ KombiTemp Electronic Monitoring Systems and Temperature Sensors DS_Electronic_monitoring_systems_and_temperature_sensors
600/1000 V. 5. Flame Retardancy VDE , DIN EN , IEC
MachineTuff Cables Low Voltage Control & Power Cable Galvanized Steel Wire Braid Armored (GSWB) > Excellent Mechanical Protection Applications Designed for applications which are installed in occasional
TEL-TRU MANUFACTURING COMPANY. Dual Magnet Thermometer cross section, Weight 1½ oz.
TEL-TRU MANUFACTURING COMPANY SURFACE THERMOMETERS Tel-Tru Surface Thermometers are 2" dial compact thermometers that sense surface temperature. Exposed bimetal coil sensors provide a quick and accurate
Process Connections for Dial Thermometers
sales@jumo.co.uk Data Sheet 608730 Page 1/7 Process Connections for Dial Thermometers Special features Temperature probes (TF) Process s (TA) Thermowell (SH) Temperature probes (TF) (S 1 min. 25 mm for
CO P P E R C A B LES A N D C O N N E C TO R S (P TY)
CCC Copper Cables & Connectors (Pty) Ltd, established in 1990, specialises in design and manufacture or repair of Water-Cooled Furnace Cables, Air-Cooled Furnace Cables, Water-Cooled Resistance Welding
Technical Data Sheet Shielded (CY) PVC Control Cable
MachineTuff Cables Tinned Copper Braid Shield (TCB) Excellent Noise Immunity Applications Designed for applications which are installed in occasional flexing and fixed locations. Cable applications include
PRODUCT DATA. Pt100 Probe, PTFE Lead. Pt100 sensing resistor in stainless steel sheath, PTFE insulated extension lead.
PRODUCT DATA Pt100 Probe, PTFE Lead Pt100 sensing resistor in stainless steel sheath, PTFE insulated extension lead Sensor type Tip temperature rating Extension cable Pt100 Class B, 4 wire to IEC 60751
Cable thermocouple Model TC40
Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 Applications For direct installation into the process Machine building Motors Bearings Pipelines and vessels Special
Differential Pressure Sensors
1 910 1910P01 Differential Pressure Sensors for air or nonaggressive gases QBM66... Pressure-linear characteristic with selectable pressure measuring range Operating voltage AC 24 V or DC 13.5...33 V Output
Panel-mounted Thermostats
Data Sheet 602031 Page 1/10 Panel-mounted Thermostats JUMO heattherm, type 602030 and 602031 Special features Stable switching point position due to ambient temperature compensation (standard) Operating
General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
DPDT BTA12-2C-S-C BTA12-2C-S-CL BTA12-2C-S-CLM SPST-NO-DM BTA12-1X-S-C BTA12-1X-S-CL BTA12-1X-S-CLM
FEATURES Plug-in relay Quick connect receptacles or direct soldering. PCB terminals are also acceptable. Large capacity 30A contact rating. Optional blowout magnet: high dc switching. Wide spacing between
TEMPERATURE CONTROL AND MONITORING HYDRAULIC COMPONENTS
Electronic level and temperature control Gasket (NBR) Operating pressure: max. 1 bar Operating temperature: -20 C up to +80 C Ambient temperature: -20 C up to +70 C Weight: approx. 400g Sealing fl uid:
Surface thermocouple Model TC50
Temperature Surface thermocouple Model TC50 WIKA data sheet TE 65.50 for further approvals see page 2 Applications To measure surface temperatures on flat surfaces or pipes, in both laboratory and industrial
FT- Thermocouples FireTECH series. FireTECH Series Thermocouples and accessories 73- Basic technical parameters
73- FireTECH Series Thermocouples and accessories The FireTech temperature sensors are designed to measure the temperature of the air or hot surfaces in fire test chambers. The FireTECH system includes:
JUMO heattherm-at and JUMO heattherm-dr
Data Sheet 603070 Page 1/15 JUMO heattherm-at and JUMO heattherm-dr Type 603070, Surface-Mounted or Room Thermostat Versions Special features -connection technology - reduced installation time by 50 %
Mineral Insulated Resistance Thermometers (RTD)
Mineral Insulated Resistance Thermometers (RTD) Electronic Temperature Measurement Data sheet : MIRTD/2012 Contents Page RTD Element Type 2 Conductors & Number of Wires 2 Probe Diameter 3 Length Types
Screw-in thermometer with connection lead Model TF37
Electrical temperature measurement Screw-in thermometer with connection lead Model TF37 WIKA data sheet TE 67.12 Applications Mobile hydraulics Machine building Compressors Automotive Cooling, heating,
JUMO heattherm Type Protection temperature limiter, as a panel-mounting thermostat Compensated for ambient temperature
Page /5 JUMO heattherm Type 6003 Protection temperature limiter, as a panel-mounting thermostat Compensated for ambient temperature Brief description Thermostats control and monitor thermal processes.
Sensor Technology For Marine Industry Applications
SENSOR Sensor Technology For Marine Industry Applications PIONEERING PRECISION AND GROWTH MARINE Ensuring Reliable Performance Sailing Any Sea Senmatic has more than 40 years of experience manufacturing
Technical Data Sheet Shielded (CY) PVC Control Cable
Technical Data Sheet Shielded (CY) PVC Control Cable MachFlex 350 CY VDE Registered Tinned Copper Braid Shield (TCB) Excellent Noise Immunity Applications Designed for applications which are installed
Data sheet chainflex CF240
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.
ELECTRONIC MONITORING SYSTEMS AND TEMPERATURE SENSORS
JJ Electronic digital thermometer JJ Temperature sensors JJ KombiTemp JJ CargoTemp roller JJ Display and monitoring systems ELECTRONIC MONITORING SYSTEMS AND TEMPERATURE SENSORS DS_Electronic_monitoring_systems_and_temperature_sensors
Data sheet chainflex CF210.UL
For detailed overview please see design table 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic
Data sheet chainflex CF140.UL
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture 4. CFRIP: Tear strip
14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
AM1 (NZ BASIC) SWITCHES
HIGH CONTACT CAPACITY, PRECISE OPERATION AM1 (NZ BASIC) SWITCHES 24.1 FEATURES 15 A High current switching capacity and high precision Wide allowance of operating speed Versatile variety of actuators UL/CSA
Technical Data Sheet Shielded (CY) PVC Control Cable
Technical Data Sheet Shielded (CY) PVC Control Cable MachFlex 375 CY Tinned Copper Braid Shield (TCB) Excellent Noise Immunity Applications Designed for applications which are installed in occasional flexing
Thermocouples W A T L O W
W A T L O W Over 90 years of manufacturing, research and design makes Watlow a world class supplier of temperature measurement products. We have designed and manufactured millions of thermocouples for
DIGI-TEL THERMOMETERS
TEL-TRU MANUFACTURING COMPANY DIGI-TEL THERMOMETERS www.teltru.com ELECTRONIC DIGITAL THERMOMETERS Tel-Tru s DIGI-TEL Thermometers combine the easy, quick visual reference feature of a local indicator
ANKERSMID Temperature controller ATC 510/520/525 for wall-mounting. Application
2-3.1 ATC 510/520/525 for wall-mounting Application The ATC 510/5205/525 is a modern microprocessor-based (PID) control device featuring easy handling and a digital display. The clear design of the operator
Data sheet chainflex CF6
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture
Pressure Transmitter JUMO dtrans p30 Type
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 e-mail: mail@jumo.net Internet: www.jumo.net JUMO
Temperature Sensors and Special Cables
A FEW WORDS ABOUT THIS CATALOGUE 6 TEMPERATURE SENSORS SECTION 7 Series BMR - Resistance thermometer head type suitable for measuring temperatures of liquids and gases with screw in mounting fitting 8
THERMOCOUPLE AND RESISTANCE THERMOMETER CABLES
THERMOCOUPLE AND RESISTANCE THERMOMETER CABLES ABOUT LABFACILITY Formed in 1971, Labfacility specialises in the field of Temperature and Process Measurement. We are the largest UK manufacturer of both
KEY PART # DESCRIPTION KEY PART # DESCRIPTION
SOFT SERVE #0T-CMT B A C D BEATER SHAFT ASSEMBLY HEAD ASSEMBLY F E I F G BEATER SHAFT ASSEMBLY OLD STYLE H 0 A EF0 Beater Shaft B EF0 Front Blade Scraper C EF Rear Blade Scraper D EF Shaft Seal Assembly
N I S T traceable calibration equipment conforms to MIL-STD-45662A.
www.tcproducts.com 1-800-727-5646 Thermo-Couple Products Co. Turbine RTD's are used for bearing temperature measurement which provides safe and accurate monitoring. The RTD designs offer a resistance value
Bimetal Thermometers Model 54, Heavy Duty Series
Mechanical Temperature Measurement Bimetal Thermometers Model 54, Heavy Duty Series WIKA Data Sheet TM 54.01 Applications T Universally suitable for plant, machinery, tank and apparatus construction T
- Quicktemp TP62/TW39...T500 -
Das modulare MODULAR von Hengesbach 2x transmitters TE42 each with 4...20mA, 2-L Redundant temperature measurement in heating lines, for example FEATURES 1 BASIC DEVICE - PROCESS ADAPTATION USING PROTECTIVE
Cable thermocouple Model TC40
Temperature Cable thermocouple Model TC40 WIKA data sheet TE 65.40 for further approvals see page 2 Applications For direct installation into the process Machine building Motors Bearing Pipelines and vessels
Temperature Measurement. Product Range
Temperature Measurement Product Range Company Data CONATEX Dipl.-Ing. L. Colbus GmbH P.O. Box 1220 D-66592 St.Wendel Alsfassener Straße 56 D-66606 St.Wendel Telefon: +49 (0) 6851 / 9339-0 Telefax: +49
Data sheet chainflex CF886
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Banding: Plastic foil 4. Core insulation: Mechanically high-quality PVC mixture 5. Conductor: Conductor
Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate
1 919 1919P01 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate Highly accurate measurements with calibration certificate Simple and quick
Process controller. for pneumatic and electric actuators. Process controller V. Process controller
for pneumatic and electric actuators Process controller 110-240V Process controller dtron 316 in Rittal-cabinet with current loop sensor input for controlling pneumatic and electric actuators with a position
Differential Pressure Sensors
1 910 1910P01 Differential Pressure Sensors for air or nonaggressive gases QBM66... Pressure-linear characteristic with selectable pressure measuring range Operating voltage AC 24 V or DC 13.5...33 V Output
Distribution Blocks & Bus-bar Solutions
Distribution Blocks & Bus-bar Solutions Insulated Multi Laminate Flexible Copper Bus-bars Threaded Copper Bus-bars Solid Copper Bus-bars Bus-bar Insulators & Supports Insulated Flexible Copper Braided
Magnetic and Hydraulic-Magnetic Circuit Breaker
Magnetic and Hydraulic-Magnetic Circuit Breaker 835-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics
Thread Mounted Resistance Thermometers Model TR201, with Fabricated Thermowell
Electrical Temperature Measurement Thread Mounted Resistance Thermometers Model TR201, with Fabricated Thermowell WIKA Data Sheet TE 60.15 Applications T Machinery, plant and tank construction T Energy
JUMO MIDAS Pressure transmitter
Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids
Ledex Rotary Solenoids Modifications and Custom Capabilities
Ledex Rotary Solenoids Modifications and Custom Capabilities Modifications and Customized Units For modifications including heavy duty return springs, drive pins, etc. please contact our application engineers
Pipe surface resistance thermometer, for clamping Model TR57-M, miniature design
Electrical temperature measurement Pipe surface resistance thermometer, for clamping Model TR57-M, miniature design WIKA data sheet TE 60.57 Applications Sanitary applications Food and beverage industry
System Verification Checklist
Manufacturer: Model Number: Unit Identification/Installation Equipment and Piping Identification Affixed, Specification 230553 Comply with Equipment Manufacturer s Written Installation Instructions Extra
1 (25mm): Acrylic Others: Glass standard, hermetically sealed
Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
Digital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be
Model Number Structure
Conductive Level Controller CSM DS_E_1_1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at or using self-holding circuits. Sensitivity adjustment of operating
Analog Output Terminal
Analog Output Terminal I/O Interface Converts Binary Data into Analog Output Data Two outputs available. High resolution of 1/6000. Conversion is possible within a range of 5% to 105% FS. High conversion
Data sheet chainflex CF881
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Banding: Plastic foil 4. Core insulation: Mechanically high-quality PVC mixture 5. Conductor: Stranded
General Purpose Relay
General Purpose Relay KML 15A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 to 3 pole configurations 1. COIL DATA (at 23 ) 1)
CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding and Insulation
Rated Current. Test Voltage
SINGLE POLE HIGH VOLTAGE CONNECTORS 10 / 20 / 30 / 40kV FEATURES Up to 40kVDC / 30A 100,000 Mating Cycles UL94 V-0 Flammability Rating Extended Temperature Range Central Attachment Low Cost Made in Germany
Thermocouples. General Applications Tube and Wire. Thermal Devices, Inc. Mount Airy, Maryland USA
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
Instruction Sheet. Subject: Installations Instructions. Air Compressor Kits. Importan
MULTIPLEX 2100 FUTURE, SELLERSBURG, IN 47172 800-367-4233 WWW.MANITOWOCBEVERAGE.COM/US Instruction Sheet Subject: Installations Instructions Importan Read the following warnings before beginning an installation.
Thermocouples. General Applications Tube and Wire. Performance Capabilities. Features and Benefits. Typical Applications. Construction and Tolerances
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
Heating oven with mechanical control
ED series 23 Drying ovens / Heating ovens Heating oven with mechanical control The strength of the BINDER ED series heating oven: routine drying and sterilization applications up to 300 C. Thanks to the
CF270.UL.D.
Outer jacket: Pressure extruded PUR mixture Overall shield: Bending-stable braid made of tinned copper wires Core insulation: Mechanically high-quality, especially low-capacitance TPE mixture Conductor:
LTX RF LEVEL SENSOR. Instruction Manual
LTX RF LEVEL SENSOR Instruction Manual FOR MODELS LTX01, LTX02, LTX05 Intempco Document No: LTX - M01 Rev. 1 Issue Date: April 2005 LTX01 RF LEVEL SENSOR USER MANUAL Software Rev : Rev. Date : June 2004
KEY PART # DESCRIPTION KEY PART # DESCRIPTION
Having your serial # ready before ordering ElectroFreeze parts, when calling our sales staff, will ensure speed & accuracy. 9 0 HEAD ASSEMBLY BEATER SHAFT ASSEMBLY EF Beater Shaft EF90 Cylinder Bushing
Thermal-magnetic Miniature Circuit Breaker 4230-T...
Thermal-magnetic Miniature Circuit Breaker 420-T... Description Single pole and multipole thermal-magnetic miniature circuit breakers (MCBs) in accordance with EN 60947-2, UL 077 and UL 489 for DIN rail
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added