Hydraulic Ram Control Unit HSE NG 10

Size: px
Start display at page:

Download "Hydraulic Ram Control Unit HSE NG 10"

Transcription

1 Hydraulic Ram Control Unit HSE NG 0 Design and Function Common features of VTHL ram control units: modular design robust valve elements high dynamics simple control structure The integration of all necessary valve components into a manifold mounted directly on the block cylinder results in a compact design and best power density. Together with additional mechanical feedback, the hydraulically piloted main valve forms the basis for the stroke control. Tdc (top dead center) control is always with mechanical closed loop feedback. Bdc (bottom dead center) control may be with electrical feedback or with mechanical feedback control, depending on the application. The hydromechanical design of the stroce control unit offers an accurate and drift-free tdc. Due to the fast steering process, the bdc has a good repatability as well.

2 Technical Data General Ram force Ram return force Operating force tdc Operating force bdc 0 to 60 kn (standard design) approx. 50% ram force 400 N at 80 bar control pressure 50 N (at mechanical bdc reversal) Ambient temperature -5 to +50 C Mounting position mountable in any position Hydraulic Operating pressure max. 50 bar Control pressure 40 to 80 bar; max. 50 bar Hydraulic oil temperature -0 to +70 C Viscosity range 0 to 00 mm /s Electric Valve control Valve voltage (0%) Switching time Start Valve switching time from bdc Voith stroke control HS (data sheet: 9) 4 V DC 8 ms (HS) 7 ms (HS) Power consumption P0 0 W System of protection DIN IP65 with valve plug connected Features highly dynamic punching and shearing drive for shortest cycle time smooth stroke operation via hydraulically damped cylinder ram stable tdc position without drift exact bdc reversing for process safe stroke operation manually adjustable stroke positions; optionally electrical simple functions with robust valve technique monitored processes with low control complexity Options stroke control units NG 6 and NG 5 for lower or higher force range stroke control unit HSP for programmable stroke positions complete punching systems Applications punching / nibbling shearing / cutting stamping 8- en VTHL 0-07 Dimensions and illustrations without obligation. Subject to modifications. Further specific performance data according to computation minutes. Electronic Control The ram control units HSE are delivered with an electronic control, the link between hydraulics and machine control. This control is adapted to the application. Please refer to the technical data from the data sheet of the electronic control. Electronic control HS - data sheet 9 or HS - data sheet 9. Examples of Applications Application Specific Performance Punching and Nibbling Machine Section Shearing Machine Pipe Cutting Machine Punching force: 00 kn Total cycle time at 6 mm stroke: 40 ms Shearing force: 50 kn Total cycle time at 0 mm stroke: 60 ms Shearing force: 00 kn Total cycle time at 4 mm stroke: 40 ms

3 Functional Diagramm HSE NG 0 with electric bdc reversing T P 8- en VTHL 0-07 Dimensions and illustrations without obligation. Subject to modifications. E (b) (a) B SL * E mechanical parts *, no scope of delivery proximity switch E, no scope of delivery

4 Functional Diagramm HSE NG 0 with mechanic bdc reversing T P B UT E 8-4 en VTHL 0-07 Dimensions and illustrations without obligation. Subject to modifications. E (b) (a) B SL * mechanical parts *, no scope of delivery

5 Dimensioned Drawing Basic Design angular design C+stroke 75 A+stroke B speed selector for down movement of ram 98 UT B 6 UT K 8-5 en VTHL 0-07 Dimensions and illustrations without obligation. Subject to modifications. view Z (only cylinder) M d B E S rod-ø f7 g view Z G/ G/ B F R cylinder middle 60 all dimensions in mm

6 Dimension Table Standard Cylinders Ø piston Ø d A C K M g (position) B E F R S 50 5/ M7 x 4 x M () / M0 x 4 x M6 () / M4 x 4 x M6 () / M48 x 4 x M0 () / M64 x 4 x M4 () / M80 x 4 x M0 () / M90 x 4 x M0 () / M00 x 8 x M7 (/) further cylinder dimensions on request all data in mm 8-6 en VTHL 0-07 Dimensions and illustrations without obligation. Subject to modifications.

7 Type Code HSE E DF 0 V 700 X Y 0 / S cylinder code N = standard design S = special desig max. cylinder stroke rod diameter piston diameter external control oil drain external control oil supply design code vario-system 8-7 en VTHL 0-07 Dimensions and illustrations without obligation. Subject to modifications. nominal size control type DF = differential operation HD = high/low pressure switching FL = surface switching bdc reversing M = mechanic E = electric symbol ram control valve ram control unit material number Voith Turbo H + L Hydraulic GmbH & Co. KG Schuckertstraße Rutesheim, Germany Tel Fax sales-rut@voith.com voith.com

Hydraulic Ram Control Unit HSE NG 6

Hydraulic Ram Control Unit HSE NG 6 Hydraulic Ram Control Unit HSE NG 6 Design and Function forms the basis for the stroke control. Common features of VTHL ram control units: Tdc (top dead center) control is always with mechanical closed

More information

Accumulator Charging Unit SLE 40 Technical Data Sheet

Accumulator Charging Unit SLE 40 Technical Data Sheet Accumulator Charging Unit SLE 0 Technical Data Sheet Design and Function The accumulator charging unit SLE 0 is a compact function element, which fulfills in an optimum way the requirements of the modern

More information

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing

More information

IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet

IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing

More information

Custom Designed Solutions. Voith Hydraulic Power Packs

Custom Designed Solutions. Voith Hydraulic Power Packs Custom Designed Solutions. Voith Hydraulic Power Packs Power Packs from Experts Voith is your reliable fluid power provider with more than 40 years of experience gained through the design and manufacturing

More information

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b

More information

IPVS High-pressure Internal Gear Pumps Technical Data Sheet

IPVS High-pressure Internal Gear Pumps Technical Data Sheet IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial

More information

Saving energy while increasing productivity Servo-hydraulic drive CSH. voith.com

Saving energy while increasing productivity Servo-hydraulic drive CSH. voith.com voith.com Saving energy while increasing productivity Servo-hydraulic drive CSH In deep drawing presses, two subsystems play the decisive role for productivity and workpiece quality: the press drive and

More information

IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet

IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial

More information

Hydraulic Drives: How to Combine Dynamics and Efficiency. Bert Brahmer,

Hydraulic Drives: How to Combine Dynamics and Efficiency. Bert Brahmer, Hydraulic Drives: How to Combine Dynamics and Efficiency Bert Brahmer, 2011-04-21 Contents 1. Introduction 2. Benefits of Hydraulics in Industrial Drives 3. Challenges for Hydraulics 4. HPPC: Highly Dynamic

More information

Machine elements. Pneumatic stamping unit. Toggle-lever presses

Machine elements. Pneumatic stamping unit. Toggle-lever presses Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07

More information

Servo-operated 2/2-way solenoid valves Type EV220A

Servo-operated 2/2-way solenoid valves Type EV220A Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and

More information

Transforming your press into a servo press Press drive PSH. voith.com

Transforming your press into a servo press Press drive PSH. voith.com voith.com Transforming your press into a servo press Press drive PSH Innovation In the hydraulic press drive PSH servo pumps replaces the classic valve and control technology. This concept allows for an

More information

Hydraulic Power Packs

Hydraulic Power Packs Hydraulic Power Packs Power Packs of Experts Voith is your reliable fluid power partner with more than 40 years experience gained in the design and manufacture of hydraulic power units. With excess of

More information

IPV Catalog High-pressure Internal Gear Pumps

IPV Catalog High-pressure Internal Gear Pumps IPV Catalog High-pressure Internal Gear Pumps Benefits that convince Features that count Machines that run Internal gear pumps from Voith Turbo H + L Hydraulic are working reliably in hun dreds of thousands

More information

Servo solenoid valves with positive overlap Position feedback (Lvdt DC/DC ±10 V)

Servo solenoid valves with positive overlap Position feedback (Lvdt DC/DC ±10 V) Servo solenoid valves with positive overlap Position feedback (Lvdt DC/DC ±10 V) RE 29087/01.05 1/22 Replaces: 05.04 Type 4WRL 10 35, symbols E. / W. Nominal size 10, 16, 25, 35 Unit series 3X Maximum

More information

Pilot-Operated Proportional DC Valve Series D*1FH

Pilot-Operated Proportional DC Valve Series D*1FH Characteristics The pilot-operated proportional DC valves series of the D*1FH series are high-performance valves with electronic spool position feedback. These valves are available in sizes NG10 to NG2

More information

Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback

Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback RE 29159/07.05 1/10 Type DBEBE6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar,

More information

/2017. Swing sink clamping element double-acting

/2017. Swing sink clamping element double-acting Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group

More information

SCHMIDT HydroPneumaticPress

SCHMIDT HydroPneumaticPress Maximum orce Range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within the pressing force range 1 220

More information

Priority valve LPS. Data sheet. Series 1 x

Priority valve LPS. Data sheet. Series 1 x Priority valve LPS Data sheet Nominal sizes 40 160 Series 1 x Maximum flow 40 160 l / min HE 27548 / 10.2017 2 LPS HE 27548 / 10.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details

More information

Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses

Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page

More information

Servo solenoid valves with positive overlap and on-board electronics

Servo solenoid valves with positive overlap and on-board electronics Servo solenoid valves with positive overlap and on-board electronics RE 29089/01.05 1/22 Replaces: 05.04 Type 4WRLE 10...35, symbols E./W. Nominal size 10, 16, 25, 35 Unit series 3X Maximum working pressure

More information

Proportional directional control valve, pilot operated with on-board electronics (OBE) and inductive position transducer

Proportional directional control valve, pilot operated with on-board electronics (OBE) and inductive position transducer Proportional directional control valve, pilot operated with on-board electronics (OBE) and inductive position transducer RE 29076/12.05 1/24 Type 4WRBKE Nominal size (NG) 10, 16, 27, 35 Unit series 1X

More information

Proportional Throttle Valves Series TDL

Proportional Throttle Valves Series TDL Catalogue HY11-200/UK Characteristics Function Proportional throttle valves are designed to include three stages. The main valve poppet is controlled by a hydraulic follower. The position of the hydraulic

More information

Servo solenoid valves with on-board electronics (OBE)

Servo solenoid valves with on-board electronics (OBE) Servo solenoid valves with on-board electronics (OBE) RE 29037/10.05 Replaces: 01.05 1/12 Type 4WRPEH 10 Size 10 Unit series 2X Maximum working pressure P, A, B 315 bar, T 250 bar Nominal flow rate 50...100

More information

Maximum force range from 15 kn to 220 kn

Maximum force range from 15 kn to 220 kn SCHMIDT HydroPneumaticPress Maximum force range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within

More information

Hydraulic Motor (Radial piston multi-stroke)

Hydraulic Motor (Radial piston multi-stroke) RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction

More information

Servo solenoid valves with on-board electronics (OBE)

Servo solenoid valves with on-board electronics (OBE) Servo solenoid valves with on-board electronics (OBE) RE 29045/10.05 Replaces: 01.05 1/12 Type 5WRPE 10 Size 10 Unit series 2X Maximum working pressure P 1, P 2, A, B 210 bar, T 50 bar Nominal flow rate

More information

Servo solenoid valves with on-board electronics (OBE)

Servo solenoid valves with on-board electronics (OBE) Servo solenoid valves with on-board electronics (OBE) RE 29088/01.05 1/18 Replaces: 05.04 Type 4WRLE10...35, symbols V/V1 Size 10, 16, 25, 35 Unit series 3X Maximum working pressure P, A, B 350 bar, T,

More information

Proportional pressure reducing valve, pilot operated, with on-board electronics (OBE) and position feedback

Proportional pressure reducing valve, pilot operated, with on-board electronics (OBE) and position feedback Proportional pressure reducing valve, pilot operated, with on-board electronics (OBE) and position feedback Type DREBE6X Nominal size (NG) 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar

More information

Pilot Operated Pressure Relief Valve Series R5V (Denison)

Pilot Operated Pressure Relief Valve Series R5V (Denison) Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps

More information

4/3 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback

4/3 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback 4/3 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback RE 29025/01.05 1/16 Replaces: 05.04 Type 4WRPE..E.. /..W.. Size 6, 10 Unit series 2X Maximum working pressure

More information

Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B

Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B Data sheet Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B EV222B is an indirect servo-operated solenoid valve programme for use in connection with contaminated or aggressive

More information

Differential pressure control, electrically adjustable

Differential pressure control, electrically adjustable Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Differential pressure control, electrically adjustable RE 92 709/0504

More information

Proportional cartridge throttle valve, with inductive position transducer, pilot operated

Proportional cartridge throttle valve, with inductive position transducer, pilot operated Proportional cartridge throttle valve, with inductive position transducer, pilot operated RE 29215/09.05 1/18 Type FESX Nominal size 16, 25, 32, 40, 50 Unit series 1X Maximum working pressure A, B, X 315

More information

IPV catalog High-pressure internal gear pumps

IPV catalog High-pressure internal gear pumps Voith Turbo IPV catalog High-pressure internal gear pumps Benefits that convince Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines worldwide. Sophisticated

More information

Hydraulic clamping elements

Hydraulic clamping elements Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single

More information

4/3 directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE)

4/3 directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE) 4/ directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE) RE 977/.1 Replaces: 1.9 1/16 Type 4WRVE 1...7, symbols V, V1 Sizes 1, 16, 5, 7 Component series

More information

3-way servo solenoid valves, cartridge type, pilot operated, with inductive position transducer

3-way servo solenoid valves, cartridge type, pilot operated, with inductive position transducer 3-way servo solenoid valves, cartridge type, pilot operated, with inductive position transducer Type 3WRCB 25...50 Nominal size (NG) 25, 32, 50 Unit series 1X Maximum working pressure P, A, T, X, Z 315

More information

Solenoid valve VDHT standard BSP (British Standard Pipe)

Solenoid valve VDHT standard BSP (British Standard Pipe) Technical data sheet standard BSP (British Standard Pipe) danfoss.high-pressurepumps.com 521B1166 / DKCFN.PD.043.A1.02 Index 3. Picture Overview 4. Features 5. Technical data 6. Technical data 7. General

More information

Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper

Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module

More information

Proportional Pressure Reducing Valve PDM08130

Proportional Pressure Reducing Valve PDM08130 Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional

More information

Directional Seat Valve Series D4S (Denison)

Directional Seat Valve Series D4S (Denison) Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)

More information

Angle Seat Control Valve 7020

Angle Seat Control Valve 7020 Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid

More information

Proportional pressure reducing valve, pilot operated, with inductive position transducer

Proportional pressure reducing valve, pilot operated, with inductive position transducer Proportional pressure reducing valve, pilot operated, with inductive position transducer RE 29182/07.05 1/10 Type DREB6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar Maximum

More information

Solenoid valve VDHT Standard BSP (British Standard Pipe)

Solenoid valve VDHT Standard BSP (British Standard Pipe) MAKING MODERN LIVING POSSIBLE Data sheet Standard BSP (British Standard Pipe) high-pressurepumps.danfoss.com Contents 1. Picture overview...3 2. Introduction...4 3. VDHT valve selection overview...4 4.

More information

Servo solenoid valves with electrical position feedback (Lvdt AC/AC)

Servo solenoid valves with electrical position feedback (Lvdt AC/AC) Servo solenoid valves with electrical position feedback (Lvdt AC/AC) Type 4WRPH6 Size 6 Unit series 1X Maximum working pressure 250 bar Nominal flow rate 4...40 l/min ( p 70 bar) List of contents Contents

More information

Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P

Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block serves to maintain the feed pressure,

More information

SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs.

SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual

More information

Hydraulic Motor (Radial Piston, Multi-Stroke)

Hydraulic Motor (Radial Piston, Multi-Stroke) Industrial Hydraulics Electric Drives and Controls inear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics Hydraulic Motor (Radial Piston, Multi-Stroke) RE 15 08/10.94 1/8

More information

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning

More information

CAPTIS. The modular and flexible system for internal and external clamping

CAPTIS. The modular and flexible system for internal and external clamping NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high

More information

Directional spool valves type SWPN

Directional spool valves type SWPN Directional spool valves type SWPN Nominal size 6 or 10 according to DIN 24 340 Pressure pmax: Flow Vmax: 350 bar 150 lpm Product documentation D 7451 AT 12-2013-1.2 HAWE Hydraulik SE - Streitfeldstr.

More information

4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE)

4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE) 4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OE) ype 4WRDE Nominal size to 35 Component series 5X Maximum operating pressure 3 bar

More information

PRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009

PRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009 Proportional Directional Control Valves PRM7-6/ Size D () bar (6 PSI) L/min (. GPM ) Replaces /9 Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis

More information

15 Flow Meter SCQ. Measurement principle: spring/piston system

15 Flow Meter SCQ. Measurement principle: spring/piston system 15 Flow Meter SCQ Measurement principle: spring/piston system Flow measurement with direction indication Response time < 2 ms Compact design Withstands pressures up to 420 bar Wide range of viscosity p/t/q

More information

4-way directional servo-valve

4-way directional servo-valve 4-way directional servo-valve RE 29564/09.10 Replaces: 01.07 1/12 Type 4WS.2E Size 6 Component series 2X Maximum operating pressure 315 bar Maximum flow 48 l/min HD5994 Table of contents Contents age Features

More information

Servo solenoid valves with positive overlap and on-board electronics (OBE)

Servo solenoid valves with positive overlap and on-board electronics (OBE) Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Servo solenoid valves with positive overlap and on-board electronics (OBE) RA 2989/1.5 1/24 Model 4WRLE

More information

HEC2003/2004 Series Servo Valve System

HEC2003/2004 Series Servo Valve System BULLETIN 10006 Bul. 5.00 GUIDING SYSTEMS October 2011 HEC2003/2004 Series Servo Valve System High response servo valve with spool position feedback signal All components are mounted over the drip pan Servo

More information

Servo solenoid valves with on-board electronics (OBE)

Servo solenoid valves with on-board electronics (OBE) Servo solenoid valves with on-board electronics (OBE) RE 29077/01.05 1/16 Replaces: 01.03 Type 4WRVE10...25 Size 10, 16, 25 Unit series 2X Maximum working pressure P, A, B 350 bar, T, X, Y 250 bar Nominal

More information

Proportional cartridge throttle valve, with on-board electronics (OBE) and inductive position transducer, pilot operated

Proportional cartridge throttle valve, with on-board electronics (OBE) and inductive position transducer, pilot operated Proportional cartridge throttle valve, with on-board electronics (OBE) and inductive position transducer, pilot operated RE 29216/09.05 1/18 Type FESE Nominal size 16, 25, 32, 40, 50 Unit series 1 Maximum

More information

Proportional pressure reducing valve, pilot operated

Proportional pressure reducing valve, pilot operated Proportional pressure reducing valve, pilot operated RE 29177/07.05 1/10 Type DRE6X Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar Maximum flow rate 40 l/min List of Contents

More information

PRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002

PRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002 Proportional Directional Control Valves PRM7-6 HA 59 /6 Size D (6)...6 PSI ( bar)...6 GPM ( L/min) Replaces HA 57 / Digital control Compact design Operated by proportional solenoids High sensitivity and

More information

PRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013

PRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013 Proportional Directional Control Valves PRM7-6 / Size 6 (D ) bar (76 PSI) L/min (.6 GPM) Replaces HA 7 / Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis

More information

LOGIC ELEMENTS SERIES 10 LC* LP* /103 ED CARTRIDGE VALVES ISO DIN COVERS FOR CARTRIDGE VALVES ND

LOGIC ELEMENTS SERIES 10 LC* LP* /103 ED CARTRIDGE VALVES ISO DIN COVERS FOR CARTRIDGE VALVES ND 48 900/103 ED LC* LP* LOGIC ELEMENTS CARTRIDGE VALVES ISO 7368 - DIN 24342 COVERS FOR CARTRIDGE VALVES ND 16-25-32-40-50 p max 420 bar Q max (see performance ratings table) OPERATING PRINCIPLE Logic elements

More information

Proportional pressure reducing valve, pilot operated

Proportional pressure reducing valve, pilot operated Proportional pressure reducing valve, pilot operated Type DRE and DREE Sizes 10 and 25 1) Component series 6X Maximum operating pressure Maximum flow Table of contents Content 315 bar 300 l/min Page Features

More information

Block feeder SPVS Used in oil or grease lubrication systems

Block feeder SPVS Used in oil or grease lubrication systems 1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number

More information

Axial piston variable pump A7VO

Axial piston variable pump A7VO Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program

More information

Controlling Forces. Vibration Damper Hydrodamp

Controlling Forces. Vibration Damper Hydrodamp Controlling Forces. Vibration Damper Hydrodamp 1 Vibration Damping Means Economy. Modern engines with high torques and optimized fuel consumption are making significantly higher demands on today s drive

More information

Servo solenoid valves with electrical position feedback (Lvdt DC/DC) (ruggedized design)

Servo solenoid valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) Servo solenoid valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) RE 29026/01.05 1/14 Replaces: 11.02 Type 4WRPH Size 6, 10 Unit series 2X Maximum working pressure P, A, B 315 bar,

More information

Servo-Hydraulic Actuator SHA Fields of Application. Technical Information. Contents. RE Edition:

Servo-Hydraulic Actuator SHA Fields of Application. Technical Information. Contents. RE Edition: Servo-Hydraulic ctuator SH Fields of pplication Technical Information RE 08137 Edition: 2018-02 Contents Product Description 2 Drive Navigator of linear ctuators 2 Product Features dvantages and Customer

More information

The Future Intelligent Servo Pump Drives.

The Future Intelligent Servo Pump Drives. The Future Intelligent Servo Pump Drives. 1 Innovative Technology. Industry 4.0 ready Voith servo pumps combine the advantages of hydraulics and servo mechanics. By measuring current operating states and

More information

Electrohydraulic Drive System EHC-A

Electrohydraulic Drive System EHC-A Electrohydraulic Drive System EHC-A HYDAC Denmark HYDAC Poland HYDAC Brazil HYDAC India HYDAC China HYDAC USA HYDAC France HYDAC Germany Your Professional Partner for Electrohydraulic Drive Systems. With

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated

More information

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal

More information

Block feeder SPVS Used in oil or grease lubrication systems

Block feeder SPVS Used in oil or grease lubrication systems 1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly

More information

3/2-way Solenoid Valve for pneumatics

3/2-way Solenoid Valve for pneumatics 656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511

More information

/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping

/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping , single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping

More information

2/2 or 3/2 way direct acting rocker solenoid valve

2/2 or 3/2 way direct acting rocker solenoid valve 2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal

More information

Priority valve Type LPS

Priority valve Type LPS RE 27 548/10.98 riority valve Type LS Nominal sizes 40 to 160 Series 1X Nominal pressure 250 bar Maximum flow 160 L/min. H/AD/5977/98 riority valve type LS... Contents Description age Features 1 Ordering

More information

3/3-Way-Proportional Valve

3/3-Way-Proportional Valve 3/3-Way-Proportional Valve Content Page General Description 1 Design 2 Function 2 Technical Data 3 Options 4 Dimensions 5 Accessories 6 Flow Curves 7 General Description This proportional valve in combination

More information

Rodless Pneumatic Cylinders Series OSP-P

Rodless Pneumatic Cylinders Series OSP-P Rodless Pneumatic Cylinders Series OSP-P System Concepts & Components... 2-5 Technical Data... 7-9 Dimensions... 10-15 Active rakes... 16-19 Accessories (Mounts & Supports)... 20-29 Ordering Information...30

More information

Getting the Speed Right. Voith Variable Speed Fluid Couplings

Getting the Speed Right. Voith Variable Speed Fluid Couplings Getting the Speed Right. Voith Variable Speed Fluid Couplings 1 Voith sets the standards in the energy, oil & gas, paper, raw materials and transportation & automotive markets. Founded in 1867, Voith employs

More information

GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping

GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without

More information

3/3 servo directional control valve with mechanical position feedback

3/3 servo directional control valve with mechanical position feedback Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical () 426-4 www.cmafh.com 3/3 servo directional control valve with mechanical position feedback Type 4WS2EM...XN...-114

More information

Proportional directional valve, pilot-operated, with integrated electronics (OBE)

Proportional directional valve, pilot-operated, with integrated electronics (OBE) Proportional directional valve, pilot-operated, with integrated electronics (OBE) Type WFCE RE 943 Edition: 7- Replaces: 6- Size 6 5 Component series X Maximum operating pressure 4 bar Maximum flow 5 l/min

More information

Data Sheet * * Differential pressure - Measuring device Pressure levels PN40/PN100. Important features. Application scopes

Data Sheet * * Differential pressure - Measuring device Pressure levels PN40/PN100. Important features. Application scopes *09005393* DB_EN_DA03_GK_HL Rev.B 09/13 *09005393* d e v e l o p i n g s o l u t i o n s DA03 Data Sheet Differential pressure - Measuring device Pressure levels PN40/PN100 The differential pressure -

More information

4/3 Proportional directional valve elements L85P5 with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING

4/3 Proportional directional valve elements L85P5 with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING / Proportional directional valve elements L8P with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING L8P (EDC-IP) RE 8- Edition:.6 Replaces: 7. Size 6 Series

More information

Directional servo-valve of 4-way design

Directional servo-valve of 4-way design Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (0) 426-54 www.cmafh.com Directional servo-valve of 4-way design Type 4WSE3E 32 Size 32 Component series 5X Maximum

More information

Pilot operated proportional directional valves

Pilot operated proportional directional valves /6 Pilot operated proportional directional valves 6. Type WRLE Sizes to 7 Up to 5 bar Up to L/min Contents Function and configuration Symbols Specifications Technical data -5 Electrical connection Technical

More information

Electrically Operated Pressure Reducing Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WDRVPA 5...

Electrically Operated Pressure Reducing Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WDRVPA 5... Electrically Operated Pressure Reducing Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WDRVPA... 2 l/min, 3 bar Two pressure valve, HI / LO External pilot drain to port 3 Surface protection:

More information

Gas pressure regulator R 100 / R 100U / R 100UD

Gas pressure regulator R 100 / R 100U / R 100UD Gas pressure regulator R 100 / R 100U / R 100UD Product information Subject to modifications! Reprint prohibited! Table of Contents Application, Characteristics, Technical Data 4 Application 4 Characteristics

More information

4/3 proportional directional control valve, without position control, with on-board electronics (OBE)

4/3 proportional directional control valve, without position control, with on-board electronics (OBE) 4/3 proportional directional control valve, without position control, with on-board electronics (OBE) Type 4WRBAE..E.. /..W.. Nominal size (NG) 6, 10 Unit series 2X Maximum working pressure P, A, B 315

More information

Check valve, pilot operated

Check valve, pilot operated Check valve, pilot operated RE 21460/07.05 Replaces: 06.02 1/8 Types SV and SL Size 6 Component series 6X Maximum operating pressure 315 bar Maximum flow 60 l/min H6090 Table of contents Contents Page

More information

Economic and Comfortable. Highly Flexible Couplings for Construction Vehicles.

Economic and Comfortable. Highly Flexible Couplings for Construction Vehicles. Economic and Comfortable. Highly Flexible Couplings for Construction Vehicles. Modern engines with high torques and optimized fuel consumption are making significantly higher demands on today s drivelines.

More information

VARIABLE PUMPS FOR CLOSED LOOP OPERATION type HV-02

VARIABLE PUMPS FOR CLOSED LOOP OPERATION type HV-02 Design characteristics 1-control device modular design, precise and load-independent 2-swash plate hydrostatic bearing 3-piston-slipper assembly 21 swash angle 4-housing monoshell for high rigidity 5-valve

More information

Angle Seat Valve /2" up to 3"

Angle Seat Valve /2 up to 3 1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure

More information

4/4 directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE)

4/4 directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE) 4/4 directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE) Type 4WRPEH RE 29121 Edition: 2014-01 Size 6 Component series 3X Maximum operating pressure

More information