TECHNICAL DESCRIPTION
|
|
- Rolf Carroll
- 5 years ago
- Views:
Transcription
1 TECHNICAL DESCRIPTION STN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids, solvents and corrosive liquids. The pump has to be completely filled prior to priming; after the first priming, pump design grants that enough liquid remains in the casing for subsequent primings. exclusive design does not require any Clapet or non-return valve, that may be subject to wear and deteriorate pump performances. All non metallic wet-end components are injection moulded and/or machined from block material. The LF Graphite bush configuration, with its low friction coefficient, combined with CDR FTC exclusive balancing system of the internal magnet (Full Thrust Control), allows to withstand occasional dry running periods up to one hour. On the other hand, the SiC version allows the use of this pumps with particularly aggressive and abrasive liquids. The magnetic coupling with neodymium-iron-boron magnets insures a sealless, zero-leakage pumping solution. The closed-coupled execution makes the pump very compact, silent and safe.
2 FEATURES AND APPLICATIONS FEATURES AND APPLICATIONS DESCRIPTION Pump type Materials Handled liquids Self-priming magnetic driven centrifugal pumps in close-coupled execution PP Acids, solvents and corrosive liquids Hydraulic performances Q max = 15 m3/h H = 23m Drives From 0,75 kw (size 80) to 4 kw (size 112) Temperature range System pressure ratings Viscosity Solids From 0 C to +50 C From 20 C = 9bar to 50 C = 7bar 2% max concentration in weight Hardness max. 800 Vk Size max. 150µm DRY RUNNING PROTECTION FEATURES "FTC" (Full Thrust Control) CDR System Features Description Shaft/Axial thrust shoe material Bushing material Materials Working time with unprimed pump Working time with dry pump Sintered SiC Graphite LF PP 1h 2h Note: Liquid used for testing: water. Bushing wear after test: insignificant dimensional change
3 MAX TEMPERATURES AND PRESSURE
4 PARTS INTERCHANGEABILITY TABLE Pump Size Motor Front Casing Pump Casing Injector Suction casing Flange size /01/1M /02/1M /10/1M /14/0M /12/0M /01/1M /02/1M /10/1M /14/0M /12/0M / /01/1M /02/1M /10/1M /14/0M /12/0M /01/1M /02/1M /10/1M /14/0M /12/0M /01/1M /02/1M /10/1M /14/0M /12/0M / /01/1M /02/1M /10/1M /14/0M /12/0M38 Pump Size Motor Flange support Suction Casing Adapter Base-plate Impeller (134 mm) Gasket size /11/0M /03/0M /05/0M /C3/0M38 130/4175M /11/0M /03/0M /05/0M /C3/0M38 130/4175M / /11/0M /03/0M /05/0M /C3/0M38 130/4175M /13/0M /05/0M /C3/0M38 130/4175M /13/0M /05/0M /C3/0M38 130/4175M / /13/0M /05/0M /C3/0M38 130/4175M Pump Size Motor Gasket Gasket Gasket Lantern adapter Plug size /4175M 130/6745M 130/61150M 9490/03/1M /05/0M /4175M 130/6745M 130/61150M 9490/03/1M /05/0M / /4175M 130/6745M 130/61150M 9490/03/1M /05/0M /4175M 130/6745M 130/61150M 9490/03/1M /05/0M /4175M 130/6745M 130/61150M 9490/03/1M /05/0M / /4175M 130/6745M 130/61150M 9490/03/1M /05/0M38 Note: for components not listed refer to interchangeability STN table
5 OVERALL DIMENSIONS Note: select motor size 80/90 frame B5 and motor size 100/112 frame B14. Pump weight = 30kg
6 SECTION DRAWING PART LIST filling plug tappo riempimento A-A A drain plug tappo scarico A DIN Code Q.ty Description Material Pump Casing Rod AISI Nut AISI Front Casing PP Pump Casing PP Injector PP Suction Casing ECTFE Flange PP Flange Support PP Suction Casing Adapter ( 30 only) PTFE Base-plate PP Impeller PP Gasket FPM / EPDM Gasket FPM / EPDM Gasket FPM / EPDM Gasket FPM / EPDM Lantern Adapter AISI Elastic Washer AISI Washer AISI Washer AISI Screw AISI Screw AISI Plug PP Screw AISI Washer AISI 304
7 PERFORMANCE CURVES: 30
8 PERFORMANCE CURVES: 40
UTN-L / UTN-BL I frame
UTN-L / UTN-BL I frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps
More informationETS. Metallic Magnetic Drive Centrifugal Pumps ETS 50 WITH MOTOR. Pompe S.r.l.
ETS Metallic Magnetic Drive Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Centrifugal pumps Sub-ISO designed Materials : AISI 316 (1.4408) Close-coupled execution ETS 50 WITH MOTOR
More informationTapflo - your reliable pumpchoice
Tapflo - your reliable pumpchoice Tapflo - your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial
More informationUTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. Pompe S.P.A.
UTS HE / UTS-B HE Metallic Magnetic Drive Process Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps Materials : AISI 316 (1.4408) Close-coupled and End-suction
More informationUTN-L / UTN-BL II frame
UTN-L / UTN-BL II frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL 125-80-160 PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal
More informationA measured step forward. CENTRAN TM - Centrifugal Transfer Pumps
A measured step forward CENTRAN TM - Centrifugal Transfer Pumps TM Lutz-JESCO Centrifugal Pumps Products you can rely on Lutz-JESCO s CENTRAN TM - Magnetic Drive Centrifugal - pumps are the ideal complement
More informationChemical Motor Pump Unit BN
MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.
More informationUTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. HE: High Efficiency. Comply to : 2006/42/CE
UTS HE / UTS-B HE Metallic Magnetic Drive Process Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps Materials : AISI 316 (1.4408) Close-coupled and End-suction
More informationIndustrial-process. centrifugal pumps.
R Industrial-process centrifugal pumps www.cdrpompe.com CDR pumps - Innovative thinking general R CDR pumps - Innovative thinking since the early 60s The origins of CDR pumps date back to the early 60s
More informationTI TOWN CHEMICAL PUMPS
TMI Series (Industrial-process thermoplastic resin centrifugal pumps) Exceptional mechanical strength provided by the ductile cast iron (FCD 450) pump casing and non metallic back casing cover TI TOWN
More information- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationSP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
More informationCTM magnetic drive centrifugal pumps rev 1
CTM magnetic drive centrifugal pumps 2012 rev 1 your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial
More informationANSI DIME. Engineered for EXTREME Reliability in Chemical Processes
Pat. No. 5,779,456 ANSI DIME Extreme situations call for extreme measures. Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump engineered for the utmost reliability in even the
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationCentrifugal pumps. made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies
Vertical and horizontal centrifugal pumps www.jesspumpen.com Centrifugal pumps made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical centrifugal pumps of the
More informationCompany name: GRUDNFOS VisMin Created by: Kimmboy Ancis Phone: Date: 13/03/2017
Position Qty. Description 1 CM5-4 S-R-I-E-AQQE Product No.: 98482185 Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The pump
More informationEVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
More informationSpecifications. Ansimag KF Series Pumps for Chemical Process. Models: KF2110 KF31510 KF3210 KF4310 KF4310H KF6410
Specifications Ansimag KF Series Pumps for Chemical Process Models: KF2110 KF31510 KF3210 KF4310 KF4310H KF6410 English Original, September 2015 1 DESCRIPTION Sealless Horizontal, End Suction, Mag-drive
More informationSANWA. Metallic Self - priming Magnet Drive Pumps MEK series. Extensive Hydraulic Performance, Seal-less, Corrosion Resistant, Leak Free
SANWA Line (Europe Edition) Metallic Self - priming Magnet Drive Pumps MEK series Extensive Hydraulic Performance, Seal-less, Corrosion Resistant, Leak Free Catalog No. ISX-E-161-00 MEK Magnetic drive
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
More informationEVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More informationINDUSTRY APPLICATION. S -pumps are used in: Industry Waste treatment Environment protection Construction industry Civil engineering
INDUSTRY APPLICATION Self-priming centrifugal pumps of type S are used for pumping clean and contaminated liquids containing solids. The special design makes them suitable also for abrasive liquids. S
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More informationCENTRIFUGAL PUMP TYPE SLM NV TO DIN EN AND DIN EN ISO SEALLESS WITH MAGNET DRIVE
Production range pumps: Pumps with magnet drive Centrifugal pumps according to DIN EN 22858 Centrifugal pumps according to ANSI B73.3 Centrifugal pumps for refinery and petrochemical applications according
More informationSÜDMO NEW SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS
SÜDMO SP SERIES - NEW HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS SÜDMO SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationour contribution for environmental protection Sealless magnetic coupled centrifugal pumps acc. to EN Type NML / NMB
Sealless magnetic coupled centrifugal pumps acc. to EN 22858 our contribution for environmental protection Type NML / NMB General Magnetic coupled DICKOW-pumps of the series NM are sealless pumps. The
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 120 203 PERFORMANCE CHART 200 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL
More informationCM10-1 A-R-A-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-1 A-R-A-E-AQQE F-A-A-N Grundfos pump 97516577 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97516577/cm1-1-a-r-a-e-aqqe.html
More informationCMB-SP 3-28 I-C-A-C-A-A
GRUNDFOS DATA BOOKLET CMB-SP 3-8 I-C-A-C-A-A Grundfos Pump 9857564 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbsp/9857564/cmb-sp-3-8-i-c-a-c-a-a.html
More informationVertical Immersion Pump VTP - BBF
MB / General VTP centrifugal pumps in block design (BBF) correspond to the system of two-pipe pumps. Basically these immersion pumps are single-level immersion pumps with vertical axis the main components
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 1506 203 PERFORMANCE CURVE 2006 203 PERFORMANCE CURVE 3006 203 PERFORMANCE CURVE 4006 203
More informationCM1-2 A-R-A-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-2 A-R-A-E-AQQE F-A-A-N Grundfos pump 97516558 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97516558/cm1-2-a-r-a-e-aqqe.html
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303 THERMAL INSULATION 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL
More informationSANITARY SELF-PRIMING PUMPS CLOSED COUPLED WITH STANDARD MOTOR A - AS SERIES SELF-PRIMING PUMPS. Series A-AS
SANITARY SELF-PRIMING PUMPS CLOSED COUPLED WITH STANDARD MOTOR SERIES A - AS SELF-PRIMING PUMPS Series A-AS CSF INOX SPA PREFACE AND WARNING This publication does not constitute a contract proposal or
More informationSpare Parts. SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB
Spare Parts SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB2 2002-11 Type SMP-BCA - Stop Valve 2 Reg.: 9805 Intro.: 8605 Type SMP-BCA - Stop Valve 38mm 51mm 63.5mm 76mm 101.6mm Pos. Qty.
More informationGoulds 3296 EZMAG. Chemical Process Pump
Goulds 396 EZMAG Chemical Process Pump Goulds 396 EZMAG Chemical Process Pump Capacities to 700 gpm (160 m3/h) Heads to 60 ft (189 m) Temperatures to 535 F (80 C) Pressures to 75 PSIG Performance Features
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 076 203 PERFORMANCE CURVES 106 204 - CONSTRUCTIONS 300 SECTIONAL
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationHygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS
Hygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS Process Equipment GEA Tuchenhagen GEA Tuchenhagen -VARIFLOW Series TPS The hygienic self-priming GEA Tuchenhagen -VARIFLOW TPS
More informationAGA-AGC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00 205 PERFORMANCE CURVE
More informationGENERAL DIMENSIONS OF SMF PUMPS. Capacity upto 7,000 m /hr Head upto 45 m. Range :
Fluid Technology from Holland GENERAL DIMENSIONS OF SMF PUMPS Features : Closed or Semi-open Impeller Different Orientation of Delivery Nozzle. Vertical Execution The SMF series are single-stage centrifugal
More informationCM1-6 A-R-I-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-6 A-R-I-E-AQQE F-A-A-N Grundfos Pump 97515122 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97515122/cm1-6-a-r-i-e-aqqe.html
More informationNJK Series ISO Standard End-Suction Centrifugal Pumps
ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28
More informationMD Series. MD Series Magnetic Drive Pumps. Magnetic Drive Pumps. 1 Year Warranty!
MD Series MD Series Magnetic Drive Pumps Magnetic Drive Pumps 1 Year Warranty! MD Series - MP Range Aquaplus MP range of leak-free compact magnetic drive pumps are our best-seller and are used in medical
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationCHEMICAL PUMPS SINCE 1992
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE TURBINE S SEAL-LESS MAG DRIVE TURBINE S In seal-less magnetic drive turbine pumps, the external magnet is directly connected to the motor shaft and
More informationLPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 204 PERFORMANCE CURVE 50 205 PERFORMANCE CURVE 65 207 PERFORMANCE CURVE 80 208 PERFORMANCE
More informationARBO. ARBO Magnetic drive pumps. Pompen en Filters b.v. Product group 2.2
ARBO Pompen en Filters b.v. ARBO Magnetic drive pumps Product group 2.2 Product group 2.2 MagPro Working principle Magnetic drive pumps are Seal-less. The driving torque is transmitted by a permanent magnetic
More informationCHEMICAL PUMPS SINCE 1992
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE CENTRIFUGAL S SEAL-LESS MAG DRIVE CENTRIFUGAL S In seal-less magnetic drive centrifugal pumps, the external magnet is directly connected to the motor
More informationSelf-priming pump «Wilo-Drain SP» Technical Presentation of the new pump Wilo-Drain SP 24/07/2013 Olivier Rieu
Self-priming pump «Wilo-Drain SP» Technical Presentation of the new pump Wilo-Drain SP 24/07/2013 Olivier Rieu Summary Pump Wilo-Drain SP overview Self-priming principle Pump Wilo-Drain SP features Curves
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE CURVE 400 206 - CONSTRUCTIONS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 THERMAL INSULATION 301 MECHANICAL SEAL 302 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY amd CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS
More information2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationWHP+ SPARE PATRS LIST HIGH PRESSURE CENTRIFUGAL PUMP FORM NO.: L381655GB REVISION: 04/2015
SPARE PATRS LIST HIGH PRESSURE CENTRIFUGAL PUMP FORM NO.: L38655GB REVISION: 0/05 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. Form no.: L38655GB - revision 0/05 Table
More informationCR1-3 A-A-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR1-3 A-A-A-E-HQQE 3x23/4 5HZ Grundfos Pump 9651617 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651617/cr-1-3-a-a-a-e-hqqe.html
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE
More informationCR1-6 A-A-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR1-6 A-A-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516174 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516174/cr-1-6-a-a-a-e-hqqe.html
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 FITTINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 25/08 204 PERFORMANCE CURVE 25/15 205 PERFORMANCE CURVE 25/25 206
More informationCM1-8 A-R-I-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-8 A-R-I-E-AQQE F-A-A-N Grundfos pump 9697692 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9697692/cm1-8-a-r-i-e-aqqe.html
More informationCM5-6 A-R-A-E-AQQE C-A-A-N
GRUNDFOS DATA BOOKLET CM5-6 A-R-A-E-AQQE C-A-A-N Grundfos pump 97516572 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97516572/cm5-6-a-r-a-e-aqqe.html
More informationRichter Sealless Chemical Magnetic Drive Pumps
Richter Sealless Chemical Magnetic Drive Pumps MDK, MDK-B SAFEGLIDE PLUS dry-run option Corrosion-resistant through PFA Unfilled virgin lining Richter sealless chemical magnetic drive pumps Fields of application
More informationCR10-01 A-A-A-E-HQQE 1x220/ HZ
GRUNDFOS DATA BOOKLET CR1-1 A-A-A-E-HQQE 1x22/24 5 HZ Grundfos Pump 965872 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965872/cr-1-1-a-a-a-e-hqqe.html
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More informationCR3-13 A-A-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR3-13 A-A-A-E-HQQE 1x22/24 5HZ Grundfos Pump 9653816 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9653816/cr-3-13-a-a-a-e-hqqe.html
More informationCR1-9 A-A-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR1-9 A-A-A-E-HQQE 1x2/240 HZ Grundfos Pump 96529477 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96529477/cr-1-9-a-a-a-e-hqqe.html
More informationCR1S-6 A-A-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR1S-6 A-A-A-E-HQQE 1x22/24 5HZ Grundfos Pump 96531687 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96531687/cr-1s-6-a-a-a-e-hqqe.html
More informationHermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858
Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858 Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO
More informationSubmersible Long Shaft Pumps for the Chemical Industry Type NCT/NMT
Submersible Long Shaft Pumps for the Chemical Industry Type NCT/NMT General The DICKOW submersible pump, type NCT, for the chemical industry is a vertical pump with separate discharge pipe. The maximum
More informationCR3-2 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-2 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516649 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516649/cr-3-2-a-fgj-a-e-hqqe.html
More informationRWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationData sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
More informationT H E C O M P A N Y. TURNOVER 2005 : 9,500,000 EUROS ANNUAL OUTPUT: 3,700 pumps Total area : 10,000 m 2 Manufacturing area: 4,000 m 2
T H E C O M P A N Y TURNOVER 2005 : 9,500,000 EUROS ANNUAL OUTPUT: 3,700 pumps Total area : 10,000 m 2 Manufacturing area: 4,000 m 2 SOMEFLU is specialized for more than 40 years in the design and the
More informationMMI L STAINLESS STEEL CENTRIFUGAL PUMPS Clean or slightly muddy liquids Corrosive fluids - Acids - Solvents OPERATING RANGES APPLICATIONS
OPERATING RANGES Flow rates of up to: m /h Manometric head of up to: mcl Max. operating pressure: / bar Temperature range: - C to + C DN (nominal diameter) of ports: Male Max. viscosity: cst MMI L STAINLESS
More informationCR10-02 A-A-A-E-HQQE 3x230/ HZ
GRUNDFOS DATA BOOKLET CR1-2 A-A-A-E-HQQE 3x23/4 5 HZ Grundfos Pump 96598 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96598/cr-1-2-a-a-a-e-hqqe.html
More informationU-mag Pump Series Sales Guide
WWW.INNOMAG.COM Page 1 of 24 U-mag Pump Series Sales Guide Compact, Heavy Duty, Sealless, Mag-drive pump # Document Description Page # 1 Pump Specification & Features 3 2 Pump Identification Code 5 3 Item
More informationCR3-10 A-A-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-1 A-A-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516597 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516597/cr-3-1-a-a-a-e-hqqe.html
More informationCM5-11 A-R-G-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-11 A-R-G-E-AQQE F-A-A-N Grundfos Pump 96935476 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/96935476/cm5-11-a-r-g-e-aqqe.html
More informationCR15-02 A-F-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR15-2 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651893 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651893/cr-15-2-a-f-a-e-hqqe.html
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE CURVE 150 206 - CONSTRUCTIONS
More informationThermoplastic Centrifugal Pump type NMB
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Centrifugal Pump type NMB Suction
More informationCM25-1 A-R-G-E-AQQE C-A-A-N
GRUNDFOS DATA BOOKLET CM25-1 A-R-G-E-AQQE C-A-A-N Grundfos Pump 97516666 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97516666/cm25-1-a-r-g-e-aqqe.html
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00
More informationCR10-04 A-A-A-E-HQQE 15kW 3x400Y 50Hz
GRUNDFOS DATA BOOKLET CR1-4 A-A-A-E-HQQE 15kW 3x4Y 5Hz Grundfos Pump 965982 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965982/cr-1-4-a-a-a-e-hqqe.html
More informationCM1-5 S-R-I-E-AQQE C-A-A-N
GRUNDFOS DATA BOOKLET CM1-5 S-R-I-E-AQQE C-A-A-N Grundfos pump 98482158 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmsp0/98482158/cm1-5-s-r-i-e-aqqe.html
More informationCM1-3 S-R-I-E-AQQE C-A-A-N
GRUNDFOS DATA BOOKLET CM1-3 S-R-I-E-AQQE C-A-A-N Grundfos pump 98482156 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmsp0/98482156/cm1-3-s-r-i-e-aqqe.html
More informationCR3-6 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR3-6 A-FGJ-A-E-HQQE 1x2/240 50HZ Grundfos Pump 96537577 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537577/cr-3-6-a-fgj-a-e-hqqe.html
More informationCR1-3 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR1-3 A-FGJ-A-E-HQQE 1x22/24 5HZ Grundfos Pump 96537538 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537538/cr-1-3-a-fgj-a-e-hqqe.html
More information