Brushless internal rotor motors ECI series. Drive solutions Industrial drive engineering

Size: px
Start display at page:

Download "Brushless internal rotor motors ECI series. Drive solutions Industrial drive engineering"

Transcription

1 Brushless internal rotor motors ECI series Drive solutions Industrial drive engineering

2 Modular drive systems. Motors with integrated logic and power electronics optional gearhead, encoder and brake.

3 Contents. Information Information About ebm-papst 4 Overview of ECI motors 7 ECI motors Information about ECI motors 1 Definitions for ECI motors 12 ECI-42.XX-K1 14 ECI-63.XX-K1 16 ECI-63.XX-K3 2 ECI-63.XX-K4 24 ECI-63.XX-K5 28 ECI-8.XX-K1 32 VTD-XX.XX-K3 (speed) 38 VTD-XX.XX-K4S (position) 4 VTD-6.13-K5SB (CANopen) 42 VTD-6.35-K5SB (CANopen) 44 Gearheads Information about gearheads 48 NoiselessPlus 42 (planetary gearhead) 5 NoiselessPlus 63 (planetary gearhead) 52 Performax 42 (planetary gearhead) 54 Performax 63 (planetary gearhead) 56 Performax Plus 42 (planetary gearhead) 58 Performax Plus 63 (planetary gearhead) 6 Optimax 63 (planetary gearhead) 62 EtaCrown 52 (crown gearhead) 64 EtaCrown 75 (crown gearhead) 66 EtaCrown Plus 42 (crown gearhead) 68 EtaCrown Plus 63 (crown gearhead) 7 Gearheads ECI motors Commissioning tools 74 Brakes 76 Optical encoder system 78 Standards and guidelines 8 Operating factor, lifetime, efficiency 82 ebm-papst around the world 85 General information 3 ebm-papst around the world

4 About ebm-papst. As technological leader for ventilation and drive engineering, ebm-papst is in demand as an engineering partner in many industries. With over 15, different products, we provide the right solution for just about any challenge. Our fans and drives are reliable, quiet and energy-efficient. Six reasons that make us the ideal partner: Our systems expertise. You want the best solution for every project. The inter relationships between ventilation and drive engineering must thus be considered as a whole. And that s what we do with motor technology that sets standards, sophisticated electronics and aerodynamic designs all from a single source and perfectly matched. These system solutions release unique synergies worldwide. And in particular they relieve you of a lot of work, so that you can concentrate on your core competency. The ebm-papst spirit of invention. In addition to our wide range of products, we are always able to develop customized solutions for you. A diversified team of 6 engineers and technicians works at our three locations in Germany: Mulfingen, Landshut and St. Georgen. Contact us to discuss your next project. Our lead in technology. As pioneer and trail-blazer for developing highly efficient EC technology, we are way ahead of other motor manufacturers. Almost all our products are also available with GreenTech EC technology. The list of benefits is long: higher efficiency, main tenance-free, longer service life, sound reduction, intelligent control characteristics and unrivalled energy efficiency with savings of up to 8 % compared to conventional AC technology. Let our technology be your competitive advantage as you lead in your industry. Closeness to our customers. ebm-papst has 25 production locations worldwide (including facilities in Germany, China and the USA), together with 49 sales offices, each of which has a dense network of sales representatives. You will always have a local contact, someone who speaks your language and knows your market. Our standard of quality. Of course you can rely on the highest standards of quality with our products. Our quality management is uncompromising, at every step in every process. This is underscored by our certification according to international standards including DIN EN ISO 91, TS declaration of conformity and DIN EN ISO 141. Our sustainable approach. Assuming responsibility for the environment, for our employees and for society is an integral part of our corporate philosophy. We develop products with an eye to maximum environmental compatibility, in particular resource-preserving production methods. We promote environmental awareness among our young staff and are actively involved in sports, culture and education. That s what makes us a leading company and an ideal partner for you. 4

5 Our success story to becoming market leader and technological innovator. ECI motors Information 1963 Elektrobau Mulfingen GmbH & Co. KG founded by Gerhard Sturm and Heinz Ziehl Development of the first compact fan in the field of EC-/DC-technology The ebm-papst success story started to take off with the release of the new 68 motor The first foreign subsidiary was founded in Sweden. Gearheads 1988 Gerhard Sturm receives the German Cross of Merit. 199 The sixty millionth external rotor fan was produced Acquisition of PAPST Motoren GmbH in St. Georgen Purchase of the Landshut plant (mvl). 23 Change of name to ebm-papst. 27 Introduction of the gearhead EtaCrown. 21 GreenTech our symbol for energy-efficiency and resource conservation. 212 Introduction of a new generation control electronics (K4) for BLDC motors. 213 ebm-papst acquires the gear specialist, Zeitlauf, and wins the German Sustainability Award. 214 Launch of the BLDC intenal rotor motor, ECI Introduction of the overload-capable planetary gear Optimax Expansion of the electronic production plant, St. Georgen Hagenmoos. 5 General information ebm-papst around the world

6 6

7 Overview of ECI motors. Information Brushless internal rotor motors ECI U N V DC ECI-42.2-K1 (p. 14) ECI-42.4-K1 (p. 14) ECI-63.2-K1 (p. 16) ECI-63.4-K1 (p. 16) ECI-63.6-K1 (p. 16) ECI-63.2-K3/4/5 (p. 2) M N mnm P W n N rpm L mm d mm (integrated) (from page 1) K 1 (Hall sensor system) K 3 (speed) K 4 (position) K 5 (CANopen) (external) (from page 38) VTD-XX.XX-K3 (speed) VTD-XX.XX-K4S (position) VTD-6.13-K5SB (CANopen) VTD-6.35-K5SB (CANopen) Gearheads (from page 48) NoiselessPlus 42 (planetary gearhead) (p. 5) NoiselessPlus 63 (planetary gearhead) (p. 52) Performax 42 (planetary gearhead) (p. 54) Performax 63 (planetary gearhead) (p. 56) Performax Plus 42 (planetary gearhead) (p. 58) Performax Plus 63 (planetary gearhead) (p. 6) Optimax 63 (planetary gearhead) (p. 62) EtaCrown 52 (crown gearhead) (p. 64) EtaCrown 75 (crown gearhead) (p. 66) EtaCrown Plus 42 (crown gearhead) (p. 68) EtaCrown Plus 63 (crown gearhead) (p. 7) Brakes (page 76) BFK (spring-applied) Encoder systems (page 78) HEDS 55/512 (incremental) ECI-63.4-K3/4/5 (p. 2) ECI-63.6-K3/4/5 (p. 2) ECI-8.2-K1 (p. 32) ECI-8.4-K1 (p. 32) ECI-8.6-K1 (p. 32) General information Gearheads ECI motors Subject to alterations Standard type Preferred type: ready to ship in 48 hours With our preferred type products, we offer a selection of motors and gear motors which are available and ready to ship within 48 hours. Preferred type products can be ordered with a maximum order quantity of 2 products per order. With standard type products, we refer to a wide range of motors and gear motors which can be ordered using the stated order numbers with standard delivery times. Further products for your project requirements are available on request. These products are generally available but cannot be ordered by means of an allocated material number. We reserve the right to make changes to the necessary order numbers after technical and economic evaluation of the requirement. 7 ebm-papst around the world

8 8

9 ECI motors. ECI-42.2-K1 14 ECI-63.XX-K1 16 ECI-63.XX-K3 2 ECI-63.XX-K4 24 ECI-63.XX-K5 28 ECI-8.XX-K1 32 General information Gearheads ECI motors Information 9 ebm-papst around the world

10 Information for ECI motors. Key figures 3-phase, electronically commutated internal rotor motor with high-performance magnet Power range between 3 and 75 watts High power density realized in a compact design High overload capacity Long service life Very quiet operation Detection of rotor position via Hall sensors Customer-specific winding layouts Winding insulation as per insulation class E Protection class IP 54 as per EN : up to IP 65 Approvals Support with the accreditation of products in different economic areas and markets As an experienced and competent partner we would be happy to support you Possible approvals include CE, CCC, UL, CSA, EAC Additional approvals on request Various motor types which can be combined with planetary and crown gearheads Optional integrated control electronics Optional encoder and brake modules Logic and power electronics Magnetic sensor Winding Main magnet 1

11 Information The data in this catalog contain product specifications, but are not a guarantee of particular properties. All information is based on the measuring conditions mentioned below. Operation of motors using reference electronics at an ambient temperature of max. 4 C when attached (thermally conductive) to a free-standing steel plate of the following size: Steel plate 15 x 15 x 1 mm The nominal operating point is the basis for the electromagnetic design of the motor from the point of view of the maximum possible continuous output of the motor and is specified by the nominal values described here. The values mentioned are typical values for the design in question and are also subject to the tolerances included in the specifications or drawings. Unless otherwise stated, the supplements and safety notes contained in the relevant operating and assembly instructions must be kept at all times. Subject to availability and technical alterations. Nominal output power P N [W] The output power which the motor can produce continuously; it is calculated from nominal torque and nominal speed. For the electromagnetic design of the motor the determination of the nominal operating point is based on the fact that the nominal output power is close the maximum output power of the motor. Nominal voltage U BN, U N, U B [V DC] The DC voltage (i.e. DC voltage range) that is applied to the commutation electronics as a system supply voltage. All nominal values listed in the technical tables of the individual motors refer to this voltage. Motor applications are, however, not restricted to this voltage. Nominal speed n N [rpm] The speed at which the motor may be operated continuously while delivering nominal torque at an ambient temperature of 4 C and nominal output torque. It is an operating point on the max. motor curve based on an ideal electronics with negligible losses. Nominal torque M N [mnm] The torque that the motor can deliver continuously at an ambient temperature of 4 C and nominal speed. Speed n [min -1 ] M N Speed at no-load operation Continuous operation Short-time operation nominal operating point Torque M [mnm] M Max Starting torque The illustrated curves are idealized representations based on the figures in the tables. Nominal current I BN The current that is drawn from the system supply when the motor delivers nominal torque at nominal speed. Speed at no-load operation n L [rpm] The speed that takes effect at the nominal voltage and with unloaded motor. The theoretical possible speed at no-load operation can, in some cases, be limited by the mechanical ceiling speed. No-load current I BL [A] Is established with nominal voltage and unloaded motor; is largely influenced by the bearing friction. For drive systems that have a separate supply for power and logic, the no-load current is called I L. This no-load current is the sum of the power supply (I ZK ) and the low-power logic supply (I B ). Permanent stall torque M Bn [mnm] Is the maximum permissible torque with which the motor may be permanently loaded when the rotor is locked. Permissible eff. continuous stall current I neff [A] Is the maximum permissible current which at a stalled motor is allowed to flow into the motor lead as an effective value Current I [A] Efficiency [%] 11 ebm-papst around the world General information Gearheads ECI motors

12 Definitions for ECI motors. Continuous stall power P Bn [W] Is an approximate value for the voltage-independent maximum permitted output (P=U x I) that can be taken from the DC voltage source in holding status. Permissible peak torque short-term M max [mnm] Is the torque which the motor can usually deliver in a short time. Permissible peak current, motor lead I max [A] Is the current that must flow in to the motor lead as a peak value to achieve the short-time peak torque. Induced voltage U imax [V/1 rpm] Maximum value of the induced voltage between two motor leads at 1 rpm. It is a dimension for the electromagnetic utilization of the motor. Connection resistance R v [Ohm] The winding resistance that is measured at 2 C between any two of three winding terminations. Connection inductance L V [mh] The average inductance that is measured at 2 C between any two of three winding terminations using a sinusoidal wave measuring frequency of 1 khz. Rotor moment of inertia J R [kgm 2 x1-6 ] The mass moment of inertia of the rotor and necessary dimension for the dynamic characteristics of the motor. Protection class Information on the protection class; it describes protection against foreign particles (Point 1) and water (Point 2). Permissible ambient temperature range T U [ C] Defines the minimum and maximum permissible ambient temperature to which the mentioned performance values apply when the motor is in operation. The permissible winding temperature in the motor (115 C for insulation Class E, as per EN ) </1125 should not be exceeded. Weight m [kg] Weight of the delivered unit without additional units or packaging. Max. shaft load F radial /F axial [N] The permissible forces are divided into radial and axial load values. They are based on the maximum permissible values for the motor bearing during operation at normal rating and a defined service life expectancy L 1. Service life L 1 The values for the L 1 service life specified in conjunction with the permitted bearing loads have been calculated to DIN ISO 281. In addition to the specified values, this calculation is based on operation of the motor at nominal conditions (nominal torque, nominal speed) and an ambient temperature of max. 4 C. Therefore, the service life information is explicitly not a guarantee of service life, but strictly a theoretical quality figure. Max. reverse voltage [V DC] When the braking function is activated and when the set value step change is negative, the motor operates in controlled braking mode. In this operating state, the large part of the braking energy is fed back to the intermediate circuit until the max. reverse voltage is reached and the electronics prevent a further increase beyond this value by chopped braking. This behavior should be given special consideration when selecting the system supply. Set value input Speed setting via an analogue interface for DC voltage. Depending on the drive design, the set speed can be configured in a range from... n max, where the minimum possible speed value (with limited control quality) is about rpm (sine commutation) or approx. 5 to 1 rpm (block commutation). (Relevant only for drives with integrated operating electronics). Recommended speed range [rpm] Speed control range within which the speed control accuracy stipulated in the system specification is complied with. 12

13 Information Starting torque [mnm] Is the torque that can be delivered over a short time when the motor is started based on the electromagnetic motor characteristics and the set current limitation. ECI motors Effective torque M eff [mnm] For cycle operation (e.g. S5 operating mode intermittent duty with the effect of the startup losses and the losses due to electrical braking on the heating), the effective torque corresponding to continuous operation ( S1 operating mode) is determined according to the following formula: M eff = M A 2 t A + M L 2 t B + M Br 2 t Br t A + t B + t Br + t St M A Starting torque M Br Braking t A Acceleration time t Br Braking time M L Load torque t St Standstill time t B Load period Gearheads At an ambient temperature of 4 C this effective torque must not be greater than the nominal torque MN listed in the catalog for the selected motor. For intermittent operation (operating mode S3 with tr = relative on period) the following permissible load moment applies: M L = M N 1 t r System selection When selecting a motor and operating for a drive system, consideration should be given to the fact that the values permitted for the motor should not be exceeded by the electronics. Likewise, the relationship shown in the commutation sequences between the sequence of Hall signals and the corresponding switching times and switching states of the output stage at the phase supply lines must be observed in order to attain optimum operation of the motor. General information Please contact the manufacturer if the products are operated or stored under non standard environmental conditions. 13 ebm-papst around the world

14 ECI motor. ECI-42.XX-K1 Highly dynamic 3-phase internal rotor motor with EC technology Low cogging torque Robust, noise-optimized ball bearing system for a long service life High efficiency and high power density realized in a compact design Basic motor with electronic module K1 for operation with external control electronics Mechanical design and interfaces designed for modular flexibility Protection class IP 4 (higher on request) and connection by wires Nominal data Type ECI-42.2-K1-B ECI-42.2-K1-D ECI-42.4-K1-B ECI-42.4-K1-D Nominal voltage (U N ) V DC Nominal speed (n N )** rpm 4 Nominal torque (M N )** mnm Nominal current (I N )** A Nominal output power (P N )** W Starting torque (M max ) mnm Permissible peak current (I max )*** A Speed at no-load operation (n L ) rpm No-load current (I L ) A Permanent stall torque (M NO ) mnm Recommended speed control range rpm... 5 Rotor moment of inertia (J R ) kgm 2 x Motor constant (K E ) mvs/rad Connection resistance (R V ) Ω Connection inductance (L V ) mh Overload protection To be implemented via the control electronics Permissible ambient temperature range (T U ) C Weight kg Order no. (wire interface)* IP Subject to alterations * Classification of protection class refers to installed state with sealing on the flange side ** At T U max. 4 C Preferred type: ready to ship in 48 hours *** Permissible time for peak current: max. 1 sec. to be repeated only after complete cool down Characteristic curve ECI-42.2, 24 V (at 25 C) ECI-42.4, 24 V (at 25 C) 7 M N M Max M N M Max Speed n [min -1 ] Current I [A] Efficiency [%] Speed n [min -1 ] Current I [A] Efficiency [%] 1 Continuous Short-time operation operation Continuous Short-time operation operation Torque M [mnm] Torque M [mnm] 1) Nominal data, see table 1) Nominal data, see table Characteristic curve 48 V on request Characteristic curve 48 V on request 14

15 Technical drawing All dimensions in mm 4 x 9 (24.5 ) 4 x hole* for M3 1 deep Ø 32 Ø 42.3 max. 15±.5 Ø 6g5 L1 2±.1 2±.3 Ø 8g5 Ø Ø 42±.2 Information 4 x hole* for M deep 4 x 9 (45 ) Ø 19.5 ECI motors 3±5 Type L1 ECI ±.3 ECI ±.3 * For thread-rolling screws according to DIN 75 Fradial L1 Faxial F axial 3 N F radial 75 N L1 2 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) of 2 h (at T U max. 4 C) Electrical connection Supply wire No. Color Function 1 yellow Phase W 5 violet Phase V 6 brown Phase U PIN 5 PIN 6 PIN 7 PIN 8 PIN 1 PIN 2 PIN 3 PIN 4 Signal wire No. Color Function 4 green Hall A 3 white Hall B 8 gray Hall C Gearheads Molex pin no red U B 7 black GND Modular construction kit Brake system Spring-applied brake BFK (page 76) Basic motor Planetary gearheads NoiselessPlus 42 (page 5) Performax 42 (page 54) Performax Plus 42 (page 58) Encoder system Optical incremental encoder HEDS 55 (page 78) Recommended external control electronics VTD-XX.XX-K3 Speed (page 38) VTD-XX.XX-K4S Position (page 4) VTD-6.13-K5SB Position (page 42) Crown gearheads EtaCrown 52 (page 64) EtaCrown Plus 42 (page 68) General information For motor-gearbox combinations, depending on the choice of the single components, the maximum allowable torque (gearbox) can be exceeded or respectively not reached. 15 ebm-papst around the world

16 ECI motor. ECI-63.XX-K1 Highly dynamic 3-phase internal rotor motor with EC technology Low cogging torque Robust, noise-optimized ball bearing system for a long service life High efficiency and high power density realized in a compact design Basic motor with electronic module K1 for operation with external control electronics Mechanical design and interfaces designed for modular flexibility Protection class IP 4 / IP 54 and connection by connector system Nominal data Type ECI-63.2-K1 -B ECI-63.2-K1 -D ECI-63.4-K1 -B ECI-63.4-K1 -D ECI-63.6-K1 -B ECI-63.6-K1 -D Nominal voltage (U N ) V DC Nominal speed (n N )** rpm 4 Nominal torque (M N )** mnm Nominal current (I N )** A Nominal output power (P N )** W Starting torque (M max ) mnm Permissible peak current (I max )*** A Speed at no-load operation (n L ) rpm No-load current (I L ) A Recommended speed control range rpm... 5 Rotor moment of inertia (J R ) kgm 2 x Motor constant (K E ) mvs/rad Connection resistance (R V ) Ω Connection inductance (L V ) mh Overload protection To be implemented via the control electronics Permissible ambient temperature range (T U ) C Weight kg Order no. (wire interface)* IP Order No. (connector interface)* IP Subject to alterations * Classification of protection class refers to installed state with sealing on the flange side The wave geometry for the IP54 version differs from the illustrated drawing Preferred type: ready to ship in 48 hours ** At T U max. 4 C *** Permissible time for peak current: max. 1 sec. to be repeated only after complete cool down 16

17 ECI motors Information Characteristic curve ECI-63.2-K1, 24 V (at 25 C) 7 1 M N M Max 1 ECI-63.4-K1, 24 V (at 25 C) 7 1 M N M Max Speed n [min -1 ] Continuous Short-time operation operation Current I [A] Efficiency [%] Speed n [min -1 ] Continuous Short-time operation operation Current I [A] Efficiency [%] Gearheads Torque M [mnm] Torque M [mnm] 1) Nominal data, see table 1) Nominal data, see table Characteristic curve 48 V on request Characteristic curve 48 V on request ECI-63.6-K1, 24 V (at 25 C) 7 M N M Max 21 1 Speed n [min -1 ] Current I [A] Efficiency [%] 2 1 Continuous operation Short-time operation ) Nominal data, see table Characteristic curve 48 V on request Torque M [mnm] General information 17 ebm-papst around the world

18 ECI motor. ECI-63.XX-K1 Technical drawing Strand design All dimensions in mm 4 x 9 4 x hole* for M5 1 deep 8 x hole* for M4 1 deep 14±.7 4 x 9 4 x ±1 Tin-plated Ø 6 g5 L1 2±.3 2±.1 Ø d Ø x hole* for M3 6 deep 3 x 12 4 x hole* for M2,5 6 deep Ø 36 Ø 4 Ø 49 Ø 63 2 ±. 5±1 Ø x ferrule Type L ØD ECI ±.3 6 g5 ECI ±.3 6 g5 ECI ±.3 1 g5 * For thread-rolling screws according to DIN 75 Fradial L1 Faxial F axial 15 N F radial 15 N L1 2 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) of 2 h (at T U max. 4 C) Electrical connection Supply wire Wire Color Function 1 yellow Phase W 2 violet Phase V 3 brown Phase U Signal wire Wire Color Function 4 green Hall A 5 white Hall B 6 gray Hall C 7 red U B 8 black GND 18

19 Factory building Modular construction kit Brake system Spring-applied brake BFK (page 76) Encoder system Optical incremental encoder HEDS 55 (page 78) Recommended external control electronics VTD-XX.XX-K4S Speed (page 4) VTD-6.13-K5SB Position (page 42) VTD-6.35-K5SB Position (page 44) Basic motor Planetary gearheads NoiselessPlus 63 (page 55) Performax 63 (page 56) Performax Plus 63 (page 6) Optimax 63 (page 62) Crown gearheads EtaCrown 75 (page 66) EtaCrown Plus 63 (page 7) General information Gearheads ECI motors Information For motor-gearbox combinations, depending on the choice of the single components, the maximum allowable torque (gearbox) can be exceeded or respectively not reached. 19 ebm-papst around the world

20 ECI motor. ECI-63.XX-K3 Drive with completely integrated K3 operation and control electronics Integrated speed control Interface with analog and digital control inputs Output stage enabled via digital hardware enabling Field-oriented closed-loop control 15-pole plug Nominal data Type ECI-63.2-K3 -B ECI-63.2-K3 -D ECI-63.4-K3 -B ECI-63.4-K3 -D ECI-63.6-K3 -D Nominal voltage (U N ) V DC Permissible supply voltage range (U ZK ) V DC Max. reverse voltage V DC Nominal speed (n N ) rpm 4 Nominal torque (M N )** mnm Nominal current (I N )** A Nominal output power (P N )** W Starting torque (M max ) mnm Speed at no-load operation (n L ) rpm No-load current (I L ) A Recommended speed control range rpm... 5 Set value input analog (... 1 V) Rotor moment of inertia (J R ) kgm 2 x Function for motor protection at stall thermal Overload protection integrated Permissible ambient temperature range (T U ) C Weight kg Order no. (wire interface)* IP Order no. (connector interface)* IP Subject to alterations * Classification of protection class refers to installed state with sealing on the flange side Preferred type: ready to ship in 48 hours ** At T U max. 4 C 2

21 ECI motors Information Characteristic curve ECI-63.2-K3, 24 V (at 25 C) 7 7 M N M Max 1 ECI-63.4-K3, 24 V (at 25 C) 7 M N M Max Speed n [min -1 ] Continuous operation Short-time operation Current I [A] Efficiency [%] Speed n [min -1 ] Continuous Short-time operation operation Current I [A] Efficiency [%] Gearheads Torque M [mnm] Torque M [mnm] 1) Nominal data, see table 1) Nominal data, see table Characteristic curve 48 V on request Characteristic curve 48 V on request ECI-63.6-K3, 48 V (at 25 C) 7 M N M Max 7 1 Speed n [min -1 ] Current I [A] Efficiency [%] Continuous Short-time operation operation ) Nominal data, see table Torque M [mnm] General information 21 ebm-papst around the world

22 ECI motor. ECI-63.XX-K3 Technical drawing All dimensions in mm 4 x hole* for M5 1 deep 4 x x hole* for M4 1 deep (16.3) 4 x 9 L 2±.1 ØD 2±.3 Ø 63.5 M16 Ø Ø 63±.2 Ø 36 Ø 4 Ø Type L Ø D R 2.25±.1 M5 5 deep ECI ±.3 6 g5 ECI ±.3 6 g5 ECI ±.3 1 g5 * For thread-rolling screws according to DIN 75 Fradial L1 Faxial F axial 15 N F radial 15 N L1 2 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) of 2 h (at T U max. 4 C) Electrical connection C A B Signal Power Wire color Pin Configuration Function white 1 D-IN-A NPN 24 V brown 2 D-IN-B NPN 24 V green 3 D-IN-1 NPN 24 V yellow 4 D-IN-2 NPN 24 V / analog... 1 V / brake gray 5 D-OUT-1 PNP 24 V pink 6 D-OUT-2 PNP 24 V blue 7 D-OUT-3 PNP 24 V red 8 A-IN V (differential) black 9 A-IN-GND GND for analog IN 1 (differential) violet 1 RS485 A (+) Progr. bus gray / pink 11 RS485 B ( ) Progr. bus red / blue 12 U Logic Logic power supply (24 V) gray A Ballast Ballast resistor brown B U ZK Power supply black C GND Power / signal GND Recommended AWG

23 Cable Type Length L (mm) Order no. Cable (12+3 Pins) 1 ± Cable (12+3 Pins) 3 ± Type Length L (mm) Order no. Cable (12+3 Pins) 1 ± Cable (12+3 Pins) 3 ± ECI motors For self-assembly, cables can be obtained from Hummel: Hummel cable connector M16 for cable Ø 8-11 mm, Tightening torque: 5 Nm (Order no ) Hummel crimp insert series M16, socket 12+3 with special coding (Order no. 7K ) Hummel crimp contact socket 3 x, power, crimp range mm 2 (Order no ) Hummel crimp contact socket 12 x, signal, crimp range mm 2 (Order no ) Modular construction kit Brake system Spring-applied brake, integrated Brake module ECI 63-K4 (p. 76) Basic motor Planetary gearheads NoiselessPlus 63 (page 52) Performax 63 (page 56) Performax Plus 63 (page 6) Optimax 63 (page 62) Gearheads Information Commissioning tool Kickstart (page 74) Crown gearheads EtaCrown 75 (page 66) EtaCrown Plus 63 (page 7) Cable Connection cables have to be ordered separately General information For motor-gearbox combinations, depending on the choice of the single components, the maximum allowable torque (gearbox) can be exceeded or respectively not reached. 23 ebm-papst around the world

24 ECI motor. ECI-63.XX-K4 Drive with completely integrated 4Q operation and control electronics Speed, torque or position mode possible Selection of operating modes and parameter setting via RS485 Extensive interface with various inputs and outputs Output stage enabled via digital input Integrated brake chopper Speed set values from n= with holding torque up to 5 rpm Excellent control behavior via field-oriented control with sine commutation High efficiency and high power density realized in a compact design User-friendly parameter setting with Kickstart PC software Nominal data Type ECI-63.2-K4 -B ECI-63.2-K4 -D ECI-63.4-K4 -B ECI-63.4-K4 -D ECI-63.6-K4 -D Nominal voltage (U N ) V DC Permissible supply voltage range (U ZK ) V DC Max. reverse voltage V DC Nominal speed (n N ) rpm 4 Nominal torque (M N )** mnm Nominal current (I N )** A Nominal output power (P N )** W Starting torque (M max ) mnm Speed at no-load operation (n L ) rpm No-load current (I L ) A Recommended speed control range rpm... 5 Set value input analog / PWM / frequency / digital Rotor moment of inertia (J R ) kgm 2 x Function for motor protection at stall thermal Overload protection integrated Permissible ambient temperature range (T U ) C Weight kg Order no. (wire interface)* IP Order no. (connector interface)* IP Subject to alterations * Classification of protection class refers to installed state with sealing on the flange side Preferred type: ready to ship in 48 hours ** At T U max. 4 C 24

25 ECI motors Information Characteristic curve ECI-63.2-K4, 24 V (at 25 C) 7 7 M N M Max 1 ECI-63.4-K4, 24 V (at 25 C) 7 M N M Max Speed n [min -1 ] Continuous operation Short-time operation Current I [A] Efficiency [%] Speed n [min -1 ] Continuous Short-time operation operation Current I [A] Efficiency [%] Gearheads Torque M [mnm] Torque M [mnm] 1) Nominal data, see table 1) Nominal data, see table Characteristic curve 48 V on request Characteristic curve 48 V on request ECI-63.6-K4, 48 V (at 25 C) 7 M N M Max 7 1 Speed n [min -1 ] Current I [A] Efficiency [%] Continuous Short-time operation operation ) Nominal data, see table Torque M [mnm] General information 25 ebm-papst around the world

26 ECI motor. ECI-63.XX-K4 Technical drawing All dimensions in mm 4 x hole* for M5 1 deep 4 x x hole* for M4 1 deep (16.3) 4 x 9 L 2±.1 ØD 2±.3 Ø 63.5 M16 Ø Ø 63±.2 Ø 36 Ø 4 Ø Type L Ø D R 2.25±.1 M5 5 deep ECI ±.3 6 g5 ECI ±.3 6 g5 ECI ±.3 1 g5 * For thread-rolling screws according to DIN 75 Fradial L1 Faxial F axial 15 N F radial 15 N L1 2 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) of 2 h (at T U max. 4 C) Electrical connection C A B Signal Power Wire color Pin Configuration Function white 1 D-IN-A NPN 24 V brown 2 D-IN-B NPN 24 V green 3 D-IN-1 NPN 24 V yellow 4 D-IN-2 NPN 24 V / analog... 1 V / brake gray 5 D-OUT-1 PNP 24 V pink 6 D-OUT-2 PNP 24 V blue 7 D-OUT-3* PNP 24 V red 8 A-IN V (differential) black 9 A-IN-GND GND for analog IN 1 (differential) violet 1 RS485 A (+) Progr. bus gray / pink 11 RS485 B ( ) Progr. bus red / blue 12 U Logic Logic power supply (24 V) gray A Ballast Ballast resistor brown B U ZK Power supply black C GND Power / signal GND Recommended AWG * Output (OUT 3) is only available on ECI-63.XX-K4 26

27 Cable Type Length L (mm) Order no. Cable (12+3 Pins) 1 ± Cable (12+3 Pins) 3 ± Type Length L (mm) Order no. Cable (12+3 Pins) 1 ± Cable (12+3 Pins) 3 ± ECI motors For self-assembly, cables can be obtained from Hummel: Hummel cable connector M16 for cable Ø 8-11 mm, Tightening torque: 5 Nm (Order no ) Hummel crimp insert series M16, socket 12+3 with special coding (Order no. 7K ) Hummel crimp contact socket 3 x, power, crimp range mm 2 (Order no ) Hummel crimp contact socket 12 x, signal, crimp range mm 2 (Order no ) Modular construction kit Brake system Spring-applied brake, integrated Brake module ECI 63-K4 (p. 76) Basic motor Planetary gearheads NoiselessPlus 63 (page 52) Performax 63 (page 56) Performax Plus 63 (page 6) Optimax 63 (page 62) Gearheads Information Commissioning tool Kickstart (page 74) Crown gearheads EtaCrown 75 (page 66) EtaCrown Plus 63 (page 7) Cable Connection cables have to be ordered separately General information For motor-gearbox combinations, depending on the choice of the single components, the maximum allowable torque (gearbox) can be exceeded or respectively not reached. 27 ebm-papst around the world

28 ECI motor. ECI-63.XX-K5 Drive with integrated K5 operation and control electronics with CANopen communication interface Sine commutation of the drives with field-oriented control Speed control range down to n = rpm with holding torque up to 5 rpm possible Different operating modes according to DSP 42 (speed, torque, positioning) possible via software Electronics in safely sealed housing Connectors M16 and M12 in sealed industry standard Interface with analog and digital control inputs Nominal data Type ECI-63.2-K5 -B ECI-63.2-K5 -D ECI-63.4-K5 -B ECI-63.4-K5 -D ECI-63.6-K5 -D Nominal voltage (U N ) V DC Permissible supply voltage range (U ZK ) V DC Max. reverse voltage V DC Nominal speed (n N )** rpm 4 Nominal torque (M N )** mnm Nominal current (I N )** A Nominal output power (P N )** W Starting torque (M max ) mnm Speed at no-load operation (n L ) rpm No-load current (I L ) A Recommended speed control range rpm... 4 Rotor moment of inertia (J R ) kgm 2 x Function for motor protection at stall thermal Overload protection integrated Permissible ambient temperature range (T U ) C Weight Kg Order no. (connector interface)* IP Subject to alterations Series planned 2nd q/217 * Classification of protection class refers to installed state with sealing on the flange side ** At T U max. 4 C 28

29 ECI motors Information Characteristic curve ECI-63.2-K5, 24 V (at 25 C) 7 M N M Max 35 1 ECI-63.4-K5, 24 V (at 25 C) 7 M N M Max Speed n [min -1 ] Continuous Short-time operation operation Current I [A] Efficiency [%] Speed n [min -1 ] Continuous Short-time operation operation Current I [A] Efficiency [%] Gearheads Torque M [mnm] Torque M [mnm] 1) Nominal data, see table 1) Nominal data, see table Characteristic curve 48 V on request Characteristic curve 48 V on request ECI-63.6-K5, 48 V (at 25 C) 7 M N M Max 35 1 Speed n [min -1 ] Current I [A] Efficiency [%] 1 5 Continuous Short-time operation operation ) Nominal data, see table Torque M [mnm] General information 29 ebm-papst around the world

30 ECI motor. ECI-63.XX-K5 Technical drawing All dimensions in mm 8 x hole* for M4 1 deep 4 x x hole* for M5 1 deep 4 x 9 L 2±.3 2±.1 Ø Ø 49 Ø 4 Ø 36 D Ø 63±.2 Plug Signal Plug Power Plug CAN-IN Plug CAN-Out Type L Ø D ECI ±.5 1 g5 LED 33.5 ECI ±.5 1 g5 ECI ±.5 1 g * For thread-rolling screws according to DIN Fradial Faxial L1 F axial 15 N F radial 15 N L1 2 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) of 2 h (at T U max. 4 C) Electrical connection C B C 2 A B Plug Signal Wire color Pin Configuration Function white 1 D-IN-1 Digital input 1 brown 2 D-IN-2 Digital input 2 green 3 D-IN-3 Digital input 3 yellow 4 D-IN-4 Digital input 4 gray 5 D-IN-5 Digital input 5 pink 6 D-IN-6 Digital input 6 blue 7 D-IN-7 Digital input 7 red 8 D-OUT-1 Digital output 1 black 9 D-OUT-2 Digital output 2 violet 1 Enable Enable input gray / pink 11 A-IN-1+ Analog input 1 red / blue 12 A-IN-2 Analog input 2 gray A A-IN-1- Analog input 1 GND brown B U Logic Power supply for electronics black C GND Ground and reference for A-IN-2 Recommended AWG A PE Plug Power Plug CAN Out brown Pin A U ZK Power supply (ballast) gray Pin B Ballast Ballast resistor black Pin C GND power Power supply blue Pin FE FE Functional earth white Pin 1 CAN H CAN Bus high signal brown Pin 2 CAN L CAN Bus low signal green Pin 3 Enable 24 V yellow Pin 4 U Logic NPN / PNP 24 V Pin 4 CAN H CAN Bus high signal Pin 5 CAN L CAN Bus low signal Plug CAN-IN Pin 4 CAN H CAN Bus high signal Pin 5 CAN L CAN Bus low signal 24 3

31 Information Cable All dimensions in mm Type Length L (mm) Order no. Type Length L (mm) Order no. Cable Signal (12+3 Pins) 1 ± Cable Signal (12+3 Pins) 1 ± Cable Signal (12+3 Pins) 3 ± Cable Signal (12+3 Pins) 3 ± Cable Power (4+3+FE)* 1 ± Cable Power (4+3+FE)* 1 ± Cable Power (4+3+FE)* 3 ± Cable Power (4+3+FE)* 3 ± * Wires Pin1, Pin2 (CAN_H, CAN_L) not executed. * Wires Pin1, Pin2 (CAN_H, CAN_L) not executed. ECI motors For self-assembly, cables can be obtained from Hummel: Signal (straight) 1x cable connector M16 for cable Ø 8-11 mm, Order no x crimp insert series M16, socket 12+3 with special coding, Order no. 7K x crimp contact socket power crimp range.5-1.5mm 2, Order no x crimp contact socket signal crimp range.8-.34mm 2, Order no Signal (angled) 1x cable connector M16 for cable Ø 8-11 mm, Order no x crimp insert series M16, socket 12+3 with special coding, Order no. 7K x crimp contact socket power crimp range.5-1.5mm 2, Order no x crimp contact socket signal crimp range.8-.34mm 2, Order no Power (straight) 1x cable connector M16 for cable Ø 8-11 mm, Order no x crimp insert series M16, socket 4+3+PE, Order no x crimp contact 1.6 mm 2 / crimp range mm 2, Order no x crimp contact.8 mm 2 / crimp range.8-.34mm 2, Order no Length L (mm) Order no. Power (angled) 1x cable connector M16 for cable Ø 8-11 mm, Order no x crimp insert series M16, socket 4+3+PE, Order no x crimp contact 1.6 mm 2 / crimp range mm 2, Order no x crimp contact.8 mm 2 / crimp range.8-.34mm 2, Order no Length L (mm) Order no. Gearheads 5 ± (CANopen socket) 5 ± (CANopen plug) Length L (mm) Order no. 2 ± (CANopen connecting cable) Modular construction kit Brake system On request Commissioning tool EP-Tools (page 75) Basic motor Planetary gearheads NoiselessPlus 63 (page 52) Performax 63 (page 56) Performax Plus 63 (page 6) Optimax 63 (page 62) General information Crown gearheads Cable Connection cables have to be ordered separately For motor-gearbox combinations, depending on the choice of the single components, the maximum allowable torque (gearbox) can be exceeded or respectively not reached. EtaCrown 75 (page 66) EtaCrown Plus 63 (page 7) 31 ebm-papst around the world

32 ECI motor. ECI-8.XX-K1 Highly dynamic 3-phase internal rotor motor with EC technology Low cogging torque Robust, noise-optimized ball bearing system for a long service life High efficiency and high power density realized in a compact design Protection class IP 4/IP 54 and connection by connector system Basic motor with electronic module K1 for operation with external control electronics Mechanical design and interfaces designed for modular flexibility Nominal data Type ECI-8.2-K1 -B ECI-8.2-K1 -D ECI-8.4-K1 -B ECI-8.4-K1 -D ECI-8.6-K1 -D Nominal voltage (U N ) V DC Nominal speed (n N )* rpm 4 Nominal torque (M N )* mnm Nominal current (I N )* A Nominal output power (P N )* W Starting torque (M max ) mnm Permissible peak current (I max )** A Permanent stall torque (M NO ) mnm Speed at no-load operation (n L ) rpm No-load current (I L ) A... 4 Speed at no-load operation (n L ) rpm Rotor moment of inertia (J R ) kgm 2 x Motor constant (K E ) mvs/rad Connection resistance (R V ) Ω Connection inductance (L V ) mh Overload protection integrated Permissible ambient temperature range (T U ) C Weight kg Order no. (wire interface)*** IP Order no. (cable routing)*** IP 54 On request Subject to alterations * At T U max. 4 C ** Permissible time for peak current: max. 5 sec. to be repeated only after complete cool down *** Classification of protection class refers to installed state with sealing on the flange side 32

33 ECI motors Information Characteristic curve ECI-8.2-K1, 24 V (at 25 C) 7 M N M Max ECI-8.4-K1, 24 V (at 25 C) 7 M N M Max Speed n [min -1 ] Continuous Short-time operation operation Current I [A] Efficiency [%] Speed n [min -1 ] Continuous Short-time operation operation Current I [A] Efficiency [%] Gearheads Torque M [mnm] Torque M [mnm] 1) Nominal data, see table 1) Nominal data, see table Characteristic curve 48 V on request Characteristic curve 48 V on request ECI-8.6-K1, 48 V (at 25 C) 7 M N M Max 12 1 Speed n [min -1 ] Current I [A] Efficiency [%] 1 Continuous Short-time operation operation ) Nominal data, see table Torque M [mnm] General information 33 ebm-papst around the world

34 ECI motor. ECI-8.XX-K1 Technical drawing All dimensions in mm 8 x hole* for M6 13 deep 45 4 x hole* for M5 13 deep 4 x 9 L1 L2 3±.3 3± Ø Ø x x 9 Ø 8 ±.2 4 x 9 Ø 45 Ø 56 Ø 6 Type L1 L2 ECI ±.3 89 ±.3 ECI ±.3 19 ±.3 ECI ± ±.3 * For thread-rolling screws according to DIN 75 Fradial L1 Faxial F axial 3 N F radial 75 N L1 2 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) of 2 h (at T U max. 4 C) Electrical connection Supply wire No. Color Function 1 brown Phase L1 2 violet Phase L2 3 yellow Phase L Signal wire No. Color Function 1 red U B 2 black GND 3 green Hall A 4 white Hall B 5 gray Hall C 34

35 Cable All dimensions in mm Sensor cable with wires and plug AWG 24 (.22 mm 2 ) Type Order number Sensor cable Winding connector AWG 12 (4 mm 2 ) Type Color Order number Power wire L1 brown Power wire L2 violet Power wire L3 yellow motor side motor side Information ECI motors Modular construction kit Basic motor Gearheads Brake system On request Planetary gearheads Performax Plus 63 (page 6) Optimax 63 (page 62) Encoder system On request Recommended external control electronics VTD-XX.XX-K4S Speed (page 4) VTD-6.35-K5SB Position (page 44) General information For motor-gearbox combinations, depending on the choice of the single components, the maximum allowable torque (gearbox) can be exceeded or respectively not reached. 35 ebm-papst around the world

36 36

37 . VTD-XX.XX-K3 (speed) 38 VTD-XX.XX-K4S (position) 4 VTD-6.13-K5SB (CANopen) 42 VTD-6.35-K5SB (CANopen) 44 General information Gearheads ECI motors Information 37 ebm-papst around the world

38 . VTD-XX.XX-K3 Operating electronics for driving 3-phase BLDC motors from the ECI-42.XX-K1 and ECI-63.2-K1 series. Design in digital technology for use as OEM electronics in series applications Motor commutation and speed control via microcontroller Control parameters are each specifically designed for the motor Four-quadrant controller Speed setting via analog nominal value... 1 V DC Speed actual value processing and output Setting of the operating mode via 2 control inputs Monitoring function for output current and voltage Nominal data Type VTD-24.XX-K3 VTD-48.XX-K3 Nominal voltage (Power supply U N ) V DC Permissible supply voltage range (U) V DC Permissible continuous output current* A 3-12 depending on model 3-6 depending on model Maximum commutation frequency khz 2 Switching frequency khz 2 Minimum connection inductance mh.1 Digital inputs Number 2 Digital outputs Number 1 Analog inputs Number 1 Efficiency (in optimum working range) % 95 Permissible ambient temperature range (T U ) C Permissible ambient humidity** % Protection class IP Weight kg.2 Order number On request On request Subject to alterations Commutation: block commutation (by means of 3 digital Hall sensors) * Applicable at rated temperature T U = 4 C ** Condensation not permitted 38

39 Technical drawing All dimensions in mm ECI motors Information Electrical connection Pin Control plug X3 Motor plug X4 Capacitor plug X5 1 A Operating mode L3 Motor phase U+ Capacitor connector 2 +U B Operating voltage +U-Hall Hall sensor supply U- Capacitor connector 3 n.c. Not allocated RLG2 Hall signal 2 BR Braking resistor 4 S+ Set value input RLG1 Hall signal 1 5 B Operating mode L2 Motor phase 2 6 Actual Actual speed value L1 Motor phase 1 7 GND Ground GND Hall Ground Hall sensor supply 8 S- Ground set value input RLG3 Hall signal 3 Gearheads Cable connector X3 Color assignment Type Order no. X3 Control plug No. Color Function 1 white (AWG 2) A 5±1 3±.5 Stripped, twisted and tin-plated red (AWG 18) +U B 3 violet (AWG 2) n.c. 4 green (AWG 2) S+ 5 gray (AWG 2) B 6 yellow (AWG 2) Actual 7 black (AWG 18) GND 8 brown (AWG 2) S- General information View without wires 39 ebm-papst around the world

40 . VTD-XX.XX-K4S Operating electronics for driving 3-phase BLDC motors up to 1 watt output power Four-quadrant controller Speed, torque and positioning mode Selection of operating modes and parameter setting via RS 485 User-friendly parameter setting with Kickstart PC software Integrated brake ballast-control Device status notification by 2 LEDs Nominal data Type VTD-24.4-K4S VTD-48.2-K4S Nominal voltage (power supply U N ) V DC Permissible supply voltage range (U) V DC Maximum output current (max. 5 sec)* A 1 Permissible continuous output current* A 4 ± 1% 2 ± 1% Nominal voltage (Logic supply U L ) V DC 24 Logic current draw** (at 24 V DC) ma < 1 Maximum commutation frequency khz 2 Switching frequency khz 2 Minimum connection inductance mh.1 Digital inputs Number 4 Digital outputs Number 3 Analog inputs Number 1 Parameterization interface RS 485 Efficiency (in optimum working range) % > 95 Permissible ambient temperature range (T U ) C Permissible ambient humidity*** % Protection class IP 2 Weight kg approx..5 Order number (IP 2) Subject to alterations * Applicable at rated temperature T U = 25 C, Derating at deviating (higher) temperatures ** Current draw without current requirement of digital outputs Series planned for 2nd q/217 *** Condensation not permitted 4

41 Information Technical drawing All dimensions in mm ECI motors X 16 X 17 X 1 X 12 Status LEDs 157 X 11 Mating connectors are included in delivery Electrical connection Pin X1 Signals Logic supply X11 Hall sensors X12 Parameterization interface X16 Power supply, controller 1 D-OUT-1 +U Hall (5V) FE Ballast U 2 D-OUT-2 GND RS485 B (-) P-GND V 3 D-OUT-3 Hall A RS485 A (+) U ZK W 4 U Logic Hall B FE FE 5 GND Hall C 6 FE (Functional earth) +U sin/cos (5V) 7 D-IN-A GND 8 D-IN-B SIN 9 D-IN-1 COS 1 D-IN-2 FE 11 A-IN-1 12 A-IN-GND X17 Power supply, motor Gearheads Commissioning tool Kickstart (page 64) Kickstart PC software for commissioning/ parametrization of the drive controller Controller Power supply PC with software Kickstart General information Interface adapter Order no Image of Kickstart PC software Motor Commissioning setup 41 ebm-papst around the world

42 . VTD-6.13-K5SB Compact four-quadrant controller for BLDC motors CANopen interface (Protocol DS31, Device profile DS42) Integrated digital inputs Integrated digital outputs Integrated analog inputs Overvoltage, undervoltage and overtemperature monitoring Device status notification by 3 LEDs (Power, Status, Error) Hex switch for setting the device node ID Freely programmable due to built in MPU (Motion Process Unit) Nominal data Type VTD-6.13-K5SB Nominal voltage (Power supply U N ) V DC Permissible supply voltage range (U) V DC Maximum output current* A 5 Permissible continuous output current* A 12.5 (at 24 V) 12.5 (at 24 V) Nominal voltage (Logic supply U L ) V DC Logic current draw** (at 24 V DC) ma 6 Maximum commutation frequency khz 2 Switching frequency khz 32 Minimum connection inductance mh.2 Digital inputs Number 8 Digital outputs Number 2 Analog inputs Number 2 Parameterization interface CANopen Efficiency (in optimum working range) % 95 Permissible ambient temperature range (T U ) C Permissible ambient humidity*** % Protection class IP 2 Weight kg.31 Order number (IP 2) Subject to alterations Commutation: block commutation (by means of 3 digital Hall sensors) * Applicable at rated temperature T U = 25 C, Derating at deviating (higher) temperatures ** Current draw without current requirement of digital outputs *** Condensation not permitted 42

43 ECI motors Information Technical drawing All dimensions in mm Mating connectors are included in delivery Electrical connection Pin X1 Motor X2 Hall sensors and encoder X3 I/O's and CAN X4 I/O's Power supply 1 FE Functional earth H1 Hall sensor signal 1 U Logic Electronics A-IN-1 Analog input 1 2 +Up Power supply Power H2 Hall sensor signal 2 A-IN- + Analog input, plus D-IN-4 Digital input 4 3 GND Ground for power supply voltage H3 Hall sensor signal 3 D-IN- Digital input D-IN-5 Digital input 5 4 Ma Motor phase A A Incremental encoder A channel D-IN-1 Digital input 1 D-IN-6 Digital input 6 5 Mb Motor phase B B Incremental encoder B channel D-IN-2 Digital input 2 D-OUT-1 Digital output 1 6 Mc Motor phase C Inx Incremental encoder index channel D-IN-3 Digital input 3 D-IN-7 Digital input 7 7 +U 5V 5V auxiliary voltage (Hall and encoder) GND Ground for electronic supply voltage 8 /H1 Hall sensor signal 1 inverted A-IN- - Analog input, minus 9 /H2 Hall sensor signal 2 inverted D-OUT- Digital output 1 /H3 Hall sensor signal 3 inverted CAN Hi CAN High 11 /A Incremental encoder A channel inverted CAN Lo CAN Low 12 /B Incremental encoder B channel inverted CAN GND CAN Ground 13 /Inx Incremental encoder index channel inverted 14 GND Ground for auxiliary voltage Gearheads Commissioning tool EP-Tools (page 75) PC with software EP-Tools General information Motor Interface adapter Arrangement Commissioning 43 ebm-papst around the world

44 . VTD-6.35-K5SB Motor controller up to 1 A Compact four-quadrant controller for BLDC motors CANopen interface (Protocol DS31, Device profile DS42) Integrated digital inputs Integrated digital outputs Integrated analog inputs Overvoltage, undervoltage and overtemperature monitoring Device status notification by 3 LEDs (Power, Status, Error) Hex switch for setting the device node ID Freely programmable due to built in MPU (Motion Process Unit) Nominal data Type VTD-6.35-K5SB Nominal voltage (Power supply U N ) V DC Permissible supply voltage range (U) V DC Maximum output current* A 1 Permissible continuous output current* A 35 (at 24 V) 26 (at 48 V) Nominal voltage (Logic supply U L ) V DC Logic current draw** (at 24 V DC) ma 7 Maximum commutation frequency khz 2 Switching frequency khz 32 Minimum connection inductance mh.2 Digital inputs Number 8 Digital outputs Number 2 Analog inputs Number 2 Parameterization interface CANopen Efficiency (in optimum working range) % 95 Permissible ambient temperature range (T U ) C Permissible ambient humidity*** % Protection class IP 2 Weight kg.38 Order number (IP 2) Subject to alterations Commutation: block commutation (by means of 3 digital Hall sensors) * Applicable at rated temperature T U = 25 C, Derating at deviating (higher) temperatures Series planned for 2nd q/217 ** Current draw without current requirement of digital outputs *** Condensation not permitted 44

45 Technical drawing All dimensions in mm ECI motors Information Mating connectors are included in delivery Electrical connection Pin X1 Motor X2 Hall sensors and encoder X3 I/O's and CAN X4 I/O's Power supply 1 FE Functional earth H1 Hall sensor signal 1 U Logic Electronics A-IN-1 Analog input 1 2 +Up Power supply Power H2 Hall sensor signal 2 A-IN- + Analog input, plus D-IN-4 Digital input 4 3 GND Ground for power supply voltage H3 Hall sensor signal 3 D-IN- Digital input D-IN-5 Digital input 5 4 Ma Motor phase A A Incremental encoder A channel D-IN-1 Digital input 1 D-IN-6 Digital input 6 5 Mb Motor phase B B Incremental encoder B channel D-IN-2 Digital input 2 D-OUT-1 Digital output 1 6 Mc Motor phase C Inx Incremental encoder index channel D-IN-3 Digital input 3 D-IN-7 Digital input 7 7 +U 5V 5V auxiliary voltage (Hall and encoder) GND Ground for electronic supply voltage 8 /H1 Hall sensor signal 1 inverted A-IN- - Analog input, minus 9 /H2 Hall sensor signal 2 inverted D-OUT- Digital output 1 /H3 Hall sensor signal 3 inverted CAN Hi CAN High 11 /A Incremental encoder A channel inverted CAN Lo CAN Low 12 /B Incremental encoder B channel inverted CAN GND CAN Ground 13 /Inx Incremental encoder index channel inverted 14 GND Ground for auxiliary voltage Gearheads Commissioning tool EP-Tools (page 75) PC with software EP-Tools General information Motor Interface adapter Arrangement Commissioning 45 ebm-papst around the world

46 46

47 Gearheads. Information NoiselessPlus 42 (planetary gearhead) 5 NoiselessPlus 63 (planetary gearhead) 52 Performax 42 (planetary gearhead) 54 Performax 63 (planetary gearhead) 56 Performax Plus 42 (planetary gearhead) 58 Performax Plus 63 (planetary gearhead) 6 Optimax 63 (planetary gearhead) 62 EtaCrown 52 (crown gearhead) 64 EtaCrown 75 (crown gearhead) 66 EtaCrown Plus 42 (crown gearhead) 68 EtaCrown Plus 63 (crown gearhead) 7 Information on operating factor, lifetime, efficiency 82 General information ECI motors Gearheads 47 ebm-papst around the world

48 Information for gearheads. In the gearbox product range, we offer three types of transmission technologies. These include planetary gearing, crown gearhead units and spur gears, all individually adapted to the requirements of the customer according to the modular principle. Deciding which of these technologies will render the best results for the respective application, ultimately depends on the application itself. Characteristics of the individual transmission technologies: Planetary gearheads Higher reduction ratios within first and second stage Very quiet operation Extremely high performance Compact design No offset axle Comprehensive range of products with three model types - Noiseless Plus unique quiet operation - Performax extreme performance - Optimax robust and long lifetime Crown gearheads Outstanding efficiency Large reduction ratio range No self-locking Highest power density No offset axle Two different model ranges - EtaCrown - EtaCrown Plus 48

49 Information The comprehensive range of planetary gearbox products is used when the application does not allow axle misalignment. When it comes to achieving high efficiency with minimal noise, the NoiselessPlus is the impressive obvious choice. Exemplary smooth running is achieved thanks to extremely sturdy, low-wear plastic planetary wheels in an aluminium housing with bevelled teeth. Double ball bearing output shafts efficiently absorb the forces acting on the shaft at high radial loads. The output shafts of the NoiselessPlus gearheads are made of hardened and ground case-hardened steel and are thus particularly durable. ECI motors Performax is an innovative, patent-pending concept of high-performance planetary gearheads. With its pioneering design, Performax gearheads are popular for their outstanding power density, ultimate smoothness and unique reduction ranges. Transmissions of up to 17:1 in one stage allow the use of single-stage gearheads, whereas competitors products already require a two-stage design. The design features of the series include helical plastic gear wheels in the first stage and in the second stage, straight toothing in the zinc diecast casting with case-hardened planetary wheels. Another special standard feature of Performax gearheads is the planetary wheels of the second stage. These have needle bearings, which really sets the series apart from the regular planetary gearheads available on the market. EtaCrown is the name of the innovative angular gear with crown gearhead technology. Our vision of making crown gearheads smaller, more powerful and more efficient, and above al to manufacture them more economically, is now a reality. EtaCrown significantly improves energy efficiency and cost-effectiveness of drive solutions. The modular design can be flexibly adapted for any drive task. Characteristic is its very compact design and space-saving geometry with a symmetrical structure and maximum performance density. Transmissions of 4:1 to 113:1 are available as standard. Also standard is jolt-free start-up due to rolling tooth gripping. Smooth running due to intelligent gear-tooth technology and gearhead design, while maximum radial load thanks to double-sided support of the drive shaft are also part of its features. A special feature among angular drives is the self-locking capacity, which does not exist in the technology. In contrast to other gearbox technologies, this offers optimal protection against vandalism. 49 ebm-papst around the world General information Gearheads

50 Planetary gearheads. NoiselessPlus 42 Very quiet operation due to helical-tooth gear stages Toothed parts made of plastic with optimized sliding properties ensure smooth operation Higher reduction ratios within first and second gear stage High radial loads due to double ball bearing in the output shaft Flexible connection to customer applications (shaft variants, centering and fastening) Image of 1-stage gearhead Nominal data Gearheads NoiselessPlus 42.1 NoiselessPlus 42.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 S1 Protection class IP 5 IP 5 Weight kg Shaft load radial / axial N 5 / 35 8 / / / / / / 35 9 / 35 1 / 35 Service life h 1 1 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 5

51 Technical drawing Image of 1-stage gearhead / All dimensions in mm ECI motors Fradial L1 Faxial F axial F radial L1 35 N see table 12.5 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 1 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 1-stage L - 2-stage ECI-42.2-NP42 mm ECI-42.4-NP42 mm Subject to alterations General information Information 51 ebm-papst around the world

52 Planetary gearheads. NoiselessPlus 63 Very quiet operation due to helical-tooth gear stages Toothed parts made of plastic with optimized sliding properties ensure smooth operation Higher reduction ratios within first and second gear stage High radial loads due to double ball bearing in the output shaft Flexible connection to customer applications (shaft variants, centering and fastening) Image of 1-stage gearhead Nominal data Gearheads NoiselessPlus 63.1 NoiselessPlus 63.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 S1 Protection class IP 5 IP 5 Weight kg.56.8 Shaft load radial / axial N 5 / 1 5 / 1 5 / 1 1 / 1 78 / 1 1 / / / 1 Service life h 1 1 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 52

53 Technical drawing Image of 1-stage gearhead / All dimensions in mm ECI motors Information Fradial L1 Faxial F axial F radial L1 1 N see table 19 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 1 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 1-stage L - 2-stage ECI-63.2-K1-NP63 mm ECI-63.4-K1-NP63 mm ECI-63.6-K1-NP63 mm ECI-63.2-K3-NP63 mm ECI-63.4-K3-NP63 mm ECI-63.6-K3-NP63 mm ECI-63.2-K4-NP63 mm ECI-63.4-K4-NP63 mm ECI-63.6-K4-NP63 mm ECI-63.2-K5-NP63 mm ECI-63.4-K5-NP63 mm ECI-63.6-K5-NP63 mm Subject to alterations General information 53 ebm-papst around the world

54 Planetary gearheads. Performax 42 High power density from compact dimensions Very quiet operation due to helical teeth in the first gear stage Planetary wheels made of plastic with optimized sliding properties in the first stage ensure smooth operation Large effective diameter thanks to radial screw connection Economical setup due to use of many individual parts which are readily available on the market Image of 2-stage gearhead Nominal data Gearheads Performax 42.1 Performax 42.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 S1 Protection class IP 5 IP 5 Weight kg Shaft load radial / axial N 25 / / 15 Service life h 5 5 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 54

55 Technical drawing Image of 1-stage gearhead / All dimensions in mm ECI motors Fradial L1 Faxial F axial F radial L1 15 N 25 N 12.5 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 5 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 1-stage L - 2-stage ECI-42.2-K1-P42 mm ECI-42.4-K1-P42 mm Subject to alterations General information Information 55 ebm-papst around the world

56 Planetary gearheads. Performax 63 High power density from compact dimensions Very quiet operation due to helical teeth in the first gear stage Planetary wheels made of plastic with optimized sliding properties in the first stage ensure smooth operation Large effective diameter thanks to radial screw connection Economical setup due to use of many individual parts which are readily available on the market Image of 1-stage gearhead Nominal data Gearheads Performax 63.1 Performax 63.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 S1 Protection class IP 5 IP 5 Weight kg.4.6 Shaft load radial / axial N 35 / 5 35 / 5 Service life h 5 5 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 56

57 Technical drawing Image of 1-stage gearhead / All dimensions in mm ECI motors Information Fradial L1 Faxial F axial F radial L1 5 N 35 N 19 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 5 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 1-stage L - 2-stage ECI-63.2-K1-P63 mm ECI-63.4-K1-P63 mm ECI-63.6-K1-P63 mm ECI-63.2-K3-P63 mm ECI-63.4-K3-P63 mm ECI-63.6-K3-P63 mm ECI-63.2-K4-P63 mm ECI-63.4-K4-P63 mm ECI-63.6-K4-P63 mm ECI-63.2-K5-P63 mm ECI-63.4-K5-P63 mm ECI-63.6-K5-P63 mm Subject to alterations General information 57 ebm-papst around the world

58 Planetary gearheads. Performax Plus 42 High torques thanks to large gearing width in the first gear stage Good shock resistance due to housing made of case-hardened steel with linear tooth profile in the output stage Very quiet operation due to helical teeth in the first gear stage Planetary wheels made of plastic with optimized sliding properties in the first stage ensure smooth operation Large effective diameter thanks to radial screw connection Image of 2-stage gearhead Nominal data Gearheads Performax Plus 42.1 Performax Plus 42.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 S1 Protection class IP 5 IP 5 Weight kg Shaft load radial / axial N 25 / / 15 Service life h 5 5 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours 58

59 Technical drawing Image of 1-stage gearhead / 2-stage design completely cylindrical / All dimensions in mm ECI motors Fradial L1 Faxial F axial F radial L1 15 N 25 N 12.5 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 5 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 1-stage L - 2-stage ECI-42.2-K1-PP42 mm ECI-42.4-K1-PP42 mm Subject to alterations General information Information 59 ebm-papst around the world

60 Planetary gearheads. Performax Plus 63 High torques thanks to large gearing width in the first gear stage Good shock resistance due to housing made of case-hardened steel with linear tooth profile in the output stage Very quiet running due to helical teeth in the first gear stage Planetary wheels made of plastic with optimized sliding properties in the first stage ensure smooth operation Large effective diameter thanks to radial screw connection Image of 2-stage gearhead Nominal data Gearheads Performax Plus 63.1 Performax Plus 63.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 S1 Protection class IP 5 IP 5 Weight kg Shaft load radial / axial N 35 / 5 35 / 5 Service life h 5 5 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 6

61 Technical drawing Image of 1-stage gearhead / 2-stage design completely cylindrical / All dimensions in mm ECI motors Information Fradial L1 Faxial F axial F radial L1 5 N 35 N 19 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 5 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 1-stage L - 2-stage ECI-63.2-K1-PP63 mm ECI-63.4-K1-PP63 mm ECI-63.6-K1-PP63 mm ECI-63.2-K3-PP63 mm ECI-63.4-K3-PP63 mm ECI-63.6-K3-PP63 mm ECI-63.2-K4-PP63 mm ECI-63.4-K4-PP63 mm ECI-63.6-K4-PP63 mm ECI-63.2-K5-PP63 mm ECI-63.4-K5-PP63 mm ECI-63.6-K5-PP63 mm ECI-8.2-K1-PP63 mm ECI-8.4-K1-PP63 mm ECI-8.6-K1-PP63 mm Subject to alterations 61 General information ebm-papst around the world

62 Planetary gearheads. Optimax 63 Extreme high overload capability to cope with peak torques Robust gearhead concept for extended service life Modular design and interfaces for maximum flexibility within ebm-papst modular system High efficiency realized in a compact design Noise optimized version with planetary wheels made from high-strength plastic Protection class IP 5 (optional IP 54) Image of 1-stage gearhead Nominal data Gearheads Optimax 63.1 Optimax 63.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab )*/** Nm 4. (13.) 4. (13.) 25. (6.) 68. (35.) 68. (58.) 68. (58.) 58. (27.) Short-term torque (M max )** Nm 12. (39.) 12. (39.) 75. (18.) 15. (15.) 15. (15.) 15. (15.) 15. (81.) Gear play <.9 < 1.2 Permissible operating temperature (T U ) C Operating mode S1 / S3*** S1 / S3*** Protection class 5 5 Weight kg Shaft load radial / axial N 5 / 5 5 / 5 Service life h 1 1 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations * In S1 operation ** Value 1 applies to planetary gears (single stage) made from high-strength steel. Value 2 (in brackets) applies to planetary gears (single stage) made from high-strength plastic. *** M eff = M ab Preferred type: ready to ship in 48 hours on request 62

63 Technical drawing Image of 1-stage gearhead / All dimensions in mm ECI motors Information Fradial L1 Faxial F axial F radial L1 5 N 5 N 2 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 1 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 1-stage L - 2-stage ECI-63.2-K1-O63 mm ECI-63.4-K1-O63 mm ECI-63.6-K1-O63 mm ECI-63.2-K3-O63 mm ECI-63.4-K3-O63 mm ECI-63.6-K3-O63 mm ECI-63.2-K4-O63 mm ECI-63.4-K4-O63 mm ECI-63.6-K4-O63 mm ECI-63.2-K5-O63 mm ECI-63.4-K5-O63 mm ECI-63.6-K5-O63 mm ECI-8.2-K1-O63 mm ECI-8.4-K1-O63 mm ECI-8.6-K1-O63 mm Subject to alterations 63 General information ebm-papst around the world

64 Crown gearheads. EtaCrown 52 Maximum safety in design and operation, as well as optimal vandalism protection; no automatic lock due to high efficiency of the crown wheel technology Space-saving installation due to zero offset axle and symmetrical structure Flexible application possibilities with various optional shaft outlets and available shaft geometries Wide reduction range by means of upstream / downstream planetary stage High radial loads due to double ball bearing in the output shaft Image of 2-stage gearhead Nominal data Gearheads EtaCrown 52.1 EtaCrown 52.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 S1 Protection class IP 5 IP 5 Weight kg.4.65 Shaft load radial / axial N 3 / / 15 4 / 15 5 / / / / 15 Service life h 5 5 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 64

65 Technical drawing Image of 1-stage gearhead with left shaft end (W5) / All dimensions in mm ECI motors Information Fradial L1 Faxial F axial F radial L1 15 N see table 12.5 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 5 h (at T U 4 C). Gearheads Shaft end, right (W5) (standard) Shaft end, left (W6) Shaft end, both sides (W7) Length of the possible motor / gearhead combinations Motor / gearhead L - 1-stage L - 2-stage ECI-42.2-K1-E52 mm ECI-42.4-K1-E52 mm Subject to alterations General information 65 ebm-papst around the world

66 Crown gearheads. EtaCrown 75 Maximum safety in design and operation, as well as optimal vandalism protection; no automatic lock due to high efficiency of the crown wheel technology Space-saving installation due to zero offset axle and symmetrical structure Flexible application possibilities with various optional shaft outlets and available shaft geometries Wide reduction range by means of upstream / downstream planetary stage High radial loads due to double ball bearing in the output shaft Image of 2-stage gearhead Nominal data Gearheads EtaCrown 75.1 EtaCrown 75.2 Reduction ratio No. of stages 1 2 Efficiency.9.81 Max. input speed (n 1 ) rpm 6 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 S1 Protection class IP 5 IP 5 Weight kg Shaft load radial / axial N 15 / 5 25 / 5 4 / 5 55 / 5 8 / / / 5 Service life h 5 5 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 66

67 Technical drawing Image of 1-stage gearhead with left shaft end (W5) / All dimensions in mm Information ECI motors Fradial L1 Faxial F axial F radial L1 5 N see table 15 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 5 h (at T U 4 C). Gearheads Shaft end, right (W5) (standard) Shaft end, left (W6) Shaft end, both sides (W7) Hollow shaft (W8) Length of the possible motor / gearhead combinations Hollow shaft Ø 1 mm Motor / gearhead L - 1-stage L - 2-stage ECI-63.2-K1-E75 mm ECI-63.4-K1-E75 mm ECI-63.6-K1-E75 mm ECI-63.2-K3-E75 mm ECI-63.4-K3-E75 mm ECI-63.6-K3-E75 mm ECI-63.2-K4-E75 mm ECI-63.4-K4-E75 mm ECI-63.6-K4-E75 mm ECI-63.2-K5-E75 mm ECI-63.4-K5-E75 mm ECI-63.6-K5-E75 mm Subject to alterations 67 General information ebm-papst around the world

68 Crown gearheads. EtaCrown Plus 42 Compact design due to combination of the crown wheel and planetary stage in one housing No automatic lock due to high efficiency of the crown wheel technology High torques by using 5 straight toothed planetary gears made of case-hardened sintered steel in the integrated planetary gear stage Wide reduction range thanks to possibility of an upstream planetary stage Improved quiet operation thanks to the optimized design of the crown wheel stage when using an upstream helical planetary gear stage made of plastic with optimized sliding properties Image of 3-stage gearhead Nominal data Gearheads EtaCrown Plus 42.3 Reduction ratio No. of stages 3 Efficiency.73 Max. input speed (n 1 ) rpm 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 Protection class IP 5 Weight kg.45 Shaft load radial / axial N 3 / 2 Service life h 5 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 68

69 Technical drawing Image of 3-stage gearhead / All dimensions in mm ECI motors Fradial L1 Faxial F axial F radial L1 2 N 3 N 1 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 5 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 3-stage ECI-42.2-K1-EP42 mm 174 ECI-42.4-K1-EP42 mm 194 Subject to alterations General information Information 69 ebm-papst around the world

70 Crown gearheads. EtaCrown Plus 63 Compact design due to combination of the crown wheel and planetary stage in one housing No automatic lock due to high efficiency of the crown wheel technology High torques by using 5 straight toothed planetary gears made of case-hardened sintered steel in the integrated planetary gear stage Wide reduction range thanks to possibility of an upstream planetary stage Improved quiet operation thanks to the optimized design of the crown wheel stage when using an upstream helical planetary gear stage made of plastic with optimized sliding properties Image of 3-stage gearhead Nominal data Gearheads EtaCrown Plus 63.3 Reduction ratio No. of stages 3 Efficiency.73 Max. input speed (n 1 ) rpm 6 Rated output torque (M ab ) Nm Short-term torque (M max ) Nm Gear play Permissible operating temperature (T U ) C Operating mode S1 Protection class IP 5 Weight kg 1. Shaft load radial / axial N 6 / 3 Service life h 5 Lubrication Maintenance-free grease lubrication for life Installation position any Subject to alterations Preferred type: ready to ship in 48 hours on request 7

71 Technical drawing Image of 3-stage gearhead / All dimensions in mm ECI motors Information Fradial L1 Faxial F axial F radial L1 3 N 6 N 15 mm Permissible shaft load at nominal speed and life expectancy L 1 (nominal operation) and operating factor C B = 1 (see page 82) of 5 h (at T U 4 C). Gearheads Length of the possible motor / gearhead combinations Motor / gearhead L - 3-stage ECI-63.2-K1-EP63 mm 222 ECI-63.4-K1-EP63 mm 242 ECI-63.6-K1-EP63 mm 262 ECI-63.2-K3-EP63 mm 235 ECI-63.4-K3-EP63 mm 255 ECI-63.6-K3-EP63 mm 275 ECI-63.2-K4-EP63 mm 235 ECI-63.4-K4-EP63 mm 255 ECI-63.6-K4-EP63 mm 275 ECI-63.2-K5-EP63 mm 228 ECI-63.4-K5-EP63 mm 248 ECI-63.6-K5-EP63 mm 268 Subject to alterations General information 71 ebm-papst around the world

72 72

73 . Commissioning tools 72 Brakes 74 Optical encoder system 76 General information Gearheads Information ECI motors 73 ebm-papst around the world

74 Commissioning tools. K4 Parameterization and commissioning PC with software Kickstart Automatic operation Automatic operation with stored parameters and integrated control Power supply Controller Controller SPS Power supply Interface adapter Motor ECI-63.XX-K1 ECI-63.XX-K4 drive Commissioning setup The RS485 interface serves as an interface for parameterization and diagnosis. It can be operated using the freely available Kickstart PC software. This requires a PC and the ebm-papst USB-CAN-RS485 adapter. Load your detailed operating manual and the PC software Kickstart under Interface adapter for Kickstart PC software Order no. USB-CAN-RS485 adapter Functional description of the LED displays LED name Color Function assignment Data Error microsd red green red green red green No assignment. Active data transfer via the USB-CAN-RS485 adapter. No response following request to K4. Receipt of a faulty data package. Received data is OK. No assignment. Access to the memory card. 74

75 Commissioning tools. K5 Information Parameterization and commissioning ECI motors PC with software EP-Tools ECI-63.XX-K5 drive Interface adapter Motor ECI-63.XX-K1 VDT-... K5S Commissioning setup Gearheads Commissioning tool for EP-Tools PC software Order no. USB to CANStick Functional description of the LED displays LED name Color Display Function assignment LED Power LED1 State LED2 Error LED3 Rx LED4 Tx green yellow red green yellow lights up does not light up flashes does not light up flashes lights up does not light up flashes does not light up flashes does not light up Normal operation No power supply Bootloader mode (no firmware) Normal operation Bootloader mode (flashes with incoming message) Error No error (normal operation) Flashes with incoming message No incoming message Flashes with outgoing message No outgoing message 75 General information ebm-papst around the world

76 Brakes. Spring-applied brake Single-disk brakes with 2 friction contact surfaces Braking torque effective in powerless state Braking force is eliminated by electromagnetic force Holding brake with emergency stop function Currentless-operated brake with high power density Braking torque applied by spring force Reduced inertia for optimum dynamics Brake system external BFK for ECI 42 external BFK for ECI 63 integrated Brake module ECI 63-K4 Nominal voltage V DC Nominal power W Braking torque Nm Engagement time ms Disengagement time ms Subject to alterations Preferred type: ready to ship in 48 hours 76

77 Information Technical drawing / external All dimensions in mm ECI motors Brake mounted Brake integrated *19.8 Gearheads Brake type Ø D L1 L2 BFK (ECI-42.XX) BFK (ECI-63.XX) * Installing the brake module extends the length of the drive housing by 2 mm Electrical connection Connection cable Color red black Function Power supply GND General information 77 ebm-papst around the world

78 Optical encoder systems. Opto-electronic 2- and 3-channel incremental encoder. A corresponding evaluation in an external controller will achieve a resolution of max. 248 increments per revolution The encoder is contactor-less and wear-free. The rotary angle resolution is achieved by means of an LED, a metallic encoder disk and a photo-diode array Electrical protection IP 4 Temperature range -4 C to +1 C Additional resolutions and interfaces possible Important! Do not use in applications in which failure of the encoder interferes with the safety-relevant functions. If in doubt, consult the manufacturer. Encoder systems HEDS 55 PWB AE3 No. of pulses Z 512 per revolution (channel A and B) 512 per revolution (channel A and B) Output signal A, B 2 rectangular signals (9 phase offset; TTL-compatible) 3 rectangular signals, channel A, B (9 phase offset) and index Reaction frequency [f] 1 khz 1 khz Supply voltage [U B ] V + 5 ± 1% + 5 ± 1% Power consumption [I B ] ma type 17 max. 4 max. 11 ma Deviation, pulse width [ S ] type 5 (from electrical 9 ) type 5 (from electrical 9 ) Deviation, phase shift [ P ] type 7 (between channel A and B from electrical 9 ) max. ± 2 Index pulse width 9 ± 3 elec. Electrical connection AMP: or Molex Connector type Berg: with 4825X- terminals or Molex: 2695 with 2759 terminals Molex: with contact Weight kg.2.2 Subject to alterations Preferred type: ready to ship in 48 hours Signal processing HEDS 55 Signal processing PWB AE3 P Amplitude C (36 e) P (18 e) A channel channel A- 9 channel A+ S1 S2 S3 S4 φ (9 e) electrical channel B- channel B+ B channel channel I- channel I+ Po S1 S2 S3 S4 Clockwise rotation t 78

79 Technical drawing All dimensions in mm ECI motors Encoder L1 L2 L3 HEDS PWM Electrical connection HEDS 55 PWB AE3 Gearheads Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Information Signal wire Signal wire Pin Function Pin Function 1 GND 2 n.c. 3 A 4 U B 5 B 1 GND 2 A- 3 A+ 4 B- 5 B+ 6 I- 7 I+ 8 Vcc General information 79 ebm-papst around the world

80 Standards and guidelines. Basic information on standards and guidelines for electrical small-power motors and drive systems operated with a DC voltage of max. 75 V DC (nominal voltage): The ECI series described in this catalog are direct current motors in an electronically commutated design, which are designed and specified for a nominal voltage of max. 75 V DC. Thus the supply voltage of these drives is within the range of safety extra-low voltage (SELV). On this basis, ebm-papst would like to provide some information intended to help you understand the classification of the motors from the relevant EC Directives and the resulting consequences. The CE label In order to ensure a uniform safety level in the European internal market, the European commission has implemented a new approach for technical harmonization. This has been welcomed by all relevant parties and is visible in many products as a CE label giving proof of agreement with the harmonized provisions. What does CE actually mean? Why don t all products bear the CE label? CE is the abbreviation for Communauté Européenne. The harmonized statutory provisions are a framework directive and belong to the socalled New Approach. This framework directive defines the basic requirements, putting in circulation and operation as well as the applicable conformity assessment process. The manufacturer of a product must now decide which framework directive applies to which product. For electrical small-powered motors the following framework directive can be applied: 1) Machinery Directive 26/42/EC 2) Low Voltage Directive 214/35/EU 3) EMC Directive 214/3/EU Based on these directives, ebm-papst St. Georgen GmbH & Co. KG does not mark the electric motors and drive systems described with the CE mark and does not issue an EC Declaration of Conformity. The reason for this is consideration of the relevant EC Directives and the definitions of the terms used, Electric motor and Drive system, by ebm-papst St. Georgen GmbH & Co. KG. Definition of the electric motor An electric motor is a motor without electronics or a motor with integrated electronics of low complexity, such as commutation sensors, simple commutation electronics or commutation electronics with simple speed control with a voltage range of <75 V DC (nominal voltage) for use by customers who incorporate them into end devices. According to this definition, electric motors include, for example, the ECI-XX.XX-K1 series. Definition of drive systems Drive systems are motors with built-in electronic control systems that have a certain degree of complexity. These include electronic control systems which, in addition to a speed control, offer other functions such as current control or position control. This also includes electronic control systems which, for example, have a CANopen interface or that can be operated via programmable sequential controls. For these drive systems, the voltage range of <75 V DC (nominal voltage) and the intended use by customers who will use the systems in end devices also apply. Drive systems include the ECI-XX.XX-K3, ECI-XX.XX-K4 and ECI-XX.XX-K5 series, for example. Reasons according to the Machinery Directive 26/42/EC Electric motors are expressly exempt in Art. 1, Par. (2), lit. k) and thus are NOT given the CE mark. According to the definition of the term in Art. 2, lit. g), a drive system is an incomplete machine and thus does not receive a CE mark, but falls under the process for incomplete machines according to Art. 13. Installation instructions to Annex IV and a Declaration of Incorporation to Annex II, Part 1, Section B are available for each drive system. The specific technical documents to Art. 13, Par. (1), lit. a) have been created in-house and are archived for the government agencies of the individual countries. Based on this directive, the machine manufacturer is responsible for verifying and ensuring compliance with the basic requirements of the Machinery Directive. Reasons according to the Low Voltage Directive 214/35/EU Due to the voltage ranges (nominal voltage), the specified electric motors and drive systems do not fall under the application area of the low voltage directive according to Art. 1. 8

81 Information Reasons according to the EMC Directive 214/3/EU Because they are sold exclusively to customers who incorporate them into end devices and not to the end user, the specified electric motors and drive systems do not fall under the application area of the EMC directive according to the definition of the term in Art. 3, Par. (2), 1: As the small motors are supplied to companies who incorporate them into end devices and not to the end user, ebm-papst has no control over further use of the pre-fabricated components in devices, machines or installations. Therefore, ebm-papst provides express notice that the system manufacturer must provide a suitable EMC circuit when selecting the power supply and must provide for EMC-compliant installation and use in the devices. For more information about EMC-compliant installation and EMC safety measures, refer to resources such as the IEC 61-5-x series (Installation and Mitigation Guidelines). Proper use All drives in this catalog are determined for installation in permanently connected, stationary end devices and machines in the industrial area and must be operated on electricity only when in installed condition! Operation is prohibited until it has been ascertained that this product, along with the machine into which this product is to be installed, complies with the protective requirements of the Machinery Directive. If, when using our drives, market or application-specific product standards apply, compliance with these must be verified and ensured by the device manufacturer. This product is not intended for the end consumer. RoHS European Directive EC No. 211/65/EU (RoHS) Legally regulated substances As an innovative company and trendsetter in the world of air technology and drive engineering, ebm-papst feels a special obligation towards the environment. Accordingly, under the GreenTech logo, we have implemented a comprehensive concept that extends from the origin to the use of our products. This includes, of course, protecting our environment and using natural resources in a way that conserves them. This applies equally to our manufacturing processes and to our products. When developing our products, we already take into consideration any possible negative consequences they may have for the environment. Our goal is to prevent such environmental impact-even beyond the extent mandated by law-or to reduce it to a minimum, and thus to ensure sustainable development of our products. Thus we ensure that our products are free of materials and substances that are prohibited by law. Of course, all current products have been designed for conformity with European Directive 211/65/EU (RoHS). All older products that do not yet conform to these directives or parts thereof will be consistently redesigned. Our suppliers are required to provide us only with goods that conform to the directives. Thus we can confirm that basically, all of our products listed in this catalog conform to the above-mentioned directive. We are also available to help with any other questions you may have on both these topics. REACH Directive (EC No. 197/26) The EU legal regulation for Registration, Evaluation, Authorization and Restriction of Chemical substances (REACH) entered into force on 1 June 27. This is a chemicals law intended to provide maximum protection to health and the environment. As defined by the REACH directive, ebm-papst is a downstream user. The units you purchase from us are products as defined by REACH and thus do not require registration. However, in our own interest and to ensure a high degree of product safety, we track the implementation of REACH and the resulting requirements as part of our duty to provide information. To comply with the requirements of REACH, we are in contact with all suppliers from whom we obtain chemicals (substances), preparations and components that we use as part of our production process. Within this framework, ebm-papst fulfills the obligations set forth in the REACH regulation. If you have any other questions about the implementation of the REACH directive in our company, please do not hesitate to contact us. 81 ebm-papst around the world General information Gearheads ECI motors

82 Operating factor, lifetime, efficiency. Operating factor c B To achieve a uniform lifetime for the gearheads and motors, the necessary torques M must be increased by the respective operating factor c B under the various operating loads so as not to exceed the maximum permissible gearhead torque M 2 max (see table below). Operating modes Load Operating period in h/days 3 h 8 h 24 h 3 h 8 h 24 h even gradual sudden up to 1 switching ops./h over 1 switching ops./h One rotation direction Rotation direction change One rotation direction Rotation direction change One rotation direction Rotation direction change Operating mode It is necessary to define the operating mode under which a gear motor can be operated with certain nominal values in order to avoid overloading the motor and/or the gearhead. The values stated in this catalog refer to S1 operation (continuous operation). This means that the gear motor can be constantly operated with the stated values, but can also have a higher load placed on it for a short time. Please contact us if you require more information about this. Lifetime Lifetime is limited by the various components in the drive. If frequently overloaded, the gearhead components are subjected to more wear than under nominal load. Extreme ambient and operating conditions cause a reduction in the lifetime guaranteed for operation under operating ratio c B = 1. Efficiency η (eta) The efficiency per gear stage is at least 9%. Depending on the tooth configuration and on the manufacturing quality, far better levels of efficiency can also be achieved. The following overall efficiencies were obtained for multi-stage gearheads: Overall efficiency for 1-stage gearhead η =.9 for 2-stage gearhead η =.9 2 =.81 for 3-stage gearhead η =.9 3 =.73 for 4-stage gearhead η =.9 4 =.66 for 5-stage gearhead η =.9 5 =.59 82

83 General information Gearheads ECI motors Information 83 ebm-papst around the world

84 Region in Germany. Region north Region Middle / East Region Central / West Region South / East Region South / West Region South / East 84

Brushless external rotor motor VD/VDC series. Drive solutions Industrial drive engineering

Brushless external rotor motor VD/VDC series. Drive solutions Industrial drive engineering Brushless external rotor motor VD/VDC series Drive solutions Industrial drive engineering 217-5 Modular drive systems. Motors with integrated logic and power electronics optional gearhead. Contents. Information

More information

Brushed internal rotor motors BCI series. Drive solutions Industrial drive engineering

Brushed internal rotor motors BCI series. Drive solutions Industrial drive engineering Brushed internal rotor motors BCI series Drive solutions Industrial drive engineering Modular drive systems. Motors optional with gearhead, encoder and brake. 2 Contents. Information About ebm-papst 4

More information

Motors- Basic principles. Expertise, performance, innovation

Motors- Basic principles. Expertise, performance, innovation Motors- Basic principles Expertise, performance, innovation As a leading supplier of ventilation and drive engineering technology, ebm-papst is a highly respected engineering partner in many industries.

More information

Drive Concept for SIMATIC MICRO-DRIVE

Drive Concept for SIMATIC MICRO-DRIVE Product Catalog -4 the engineer s choice About ebm-papst ebm-papst is a leader in ventilation and drive engineering technology and a much sought-after engineering partner in many industries. With around,

More information

VARIODRIVE 3-phase external rotor motor. VARIODRIVE technical information VARIODRIVE

VARIODRIVE 3-phase external rotor motor. VARIODRIVE technical information VARIODRIVE 27.05.20 0: Seite Information Antriebstechnik_20_05_27_Finale_EN_:Vorlage VarioDrive C ECI motor 5 AC motors VARIODRIVE -phase external rotor motor Specifications 4 Representatives VARIODRIVE technical

More information

K4 drive systems Brilliantly versatile. Drive solutions Industrial drive engineering

K4 drive systems Brilliantly versatile. Drive solutions Industrial drive engineering K4 drive systems Brilliantly versatile Drive solutions Industrial drive engineering 217-11 About ebm-papst. As technological leader for ventilation and drive engineering, ebm-papst is in demand as an engineering

More information

Product overview Motors and drive systems. Industrial drive technology

Product overview Motors and drive systems. Industrial drive technology Product overview Motors and drive systems Industrial drive technology About ebm-papst. As technological leader for ventilation and drive engineering, ebm-papst is in demand as an engineering partner in

More information

Product overview Motors and drive systems. Industrial drive technology

Product overview Motors and drive systems. Industrial drive technology Product overview Motors and drive systems Industrial drive technology About ebm-papst. As technological leader for ventilation and drive engineering, ebm-papst is in demand as an engineering partner in

More information

Product overview Motors and drive systems. Industrial drive technology 2016

Product overview Motors and drive systems. Industrial drive technology 2016 Product overview Motors and drive systems Industrial drive technology 2016 About ebm-papst. As a leader in technologies for ventilation and drive engineering, ebm-papst is in demand as an engineering partner

More information

Brushless internal rotor motors with low-backlash planetary gears. Drive solutions Industrial drive engineering

Brushless internal rotor motors with low-backlash planetary gears. Drive solutions Industrial drive engineering Brushless internal rotor motors with low-backlash planetary gears Drive solutions Industrial drive engineering 218-6 218-6 2 ECI motors Information about ECI motors Definitions for ECI motors ECI-42.XX-K1

More information

Note: All windings shown are standard configuration. Please contact Motion Technologies for availability of all others

Note: All windings shown are standard configuration. Please contact Motion Technologies for availability of all others Table of content Theory 3 1) Brushless Motor MTFL22RBL Series 4 MTFL28BL Series 5 MTFL33BL Series 6 MTFL36RBL Series 7 MTFL42RBL Series 8 MTFL42BL Series 9 MTFL42BLSH Series 10 MTFL57BL Series 11 MTFL57BLSH

More information

Standard-efficiency gas heating. Innovation is our tradition.

Standard-efficiency gas heating. Innovation is our tradition. Standard-efficiency gas heating. Innovation is our tradition. About ebm-papst. As a leader in technologies for ventilation and drive engineering, ebm-papst is in demand as an engineering partner in many

More information

Quiet-running family of products with the lowest torque pulsation

Quiet-running family of products with the lowest torque pulsation Press release Highly dynamic, 3-phase internal rotor motor for industrial applications Quiet-running family of products with the lowest torque pulsation For industrial systems and devices, compact motors

More information

Power in new dimensions

Power in new dimensions NEW FAULHABER BXT Power in new dimensions WE CREATE MOTION EN Angaben zu Lebensdauer sowie weitere technische Erläuterungen 1 FAULHABER BXT Today, you don't find visionary designs in Hollywood, but rather

More information

AC axial fan. blades with special design (K series) with guard grille for full nozzle

AC axial fan. blades with special design (K series) with guard grille for full nozzle SE6-EC-5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Sensorless Brushless DC-Servomotors

Sensorless Brushless DC-Servomotors Sensorless Brushless DC-Servomotors FAULHABER Brushless DC-Servomotors are built for extreme operating conditions. They are precise, have exceptionally long lifetimes and are highly reliable. Outstanding

More information

4,5 / 27 2,0 / steel, black coated. clockwise, viewed from the front face. ø15,9 ø17-0,052 ø6-0,05. ø3,5 8,1 ±0,3 2, T

4,5 / 27 2,0 / steel, black coated. clockwise, viewed from the front face. ø15,9 ø17-0,052 ø6-0,05. ø3,5 8,1 ±0,3 2, T DC-Micromotors Precious Metal Commutation mnm For combination with (overview on page 4-5) Gearheads: 5, 6, 6/7 Encoders: IE 6... 5 Series 3 4 77... SR Nominal voltage Terminal resistance Output power Efficiency

More information

ILE2K661PC1A1 brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1

ILE2K661PC1A1 brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1 Characteristics brushless dc motor 24..48V- EtherNet/IP interface - L = 174 mm- 18:1 Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number

More information

The new fan generation S-Force

The new fan generation S-Force The new fan generation S-Force S-Force The Ultimate Performer The strongest team in the league The S-Force series is composed of five smaller series with sizes from 80 to 172 mm. Each is the world champion

More information

HBI 22. Integrated Three-phase Synchronous Drive

HBI 22. Integrated Three-phase Synchronous Drive HBI 22 Integrated Three-phase Synchronous Drive positioning capability up to 9 Watts rated output power with linear hall sensor system with or without parking brake Motor type Dimension L1 L2 HBI 223 125

More information

ILE1F661PC1A0 brushless dc motor V - CANopen DS301 interface - L = 122 mm - w/o gearbox

ILE1F661PC1A0 brushless dc motor V - CANopen DS301 interface - L = 122 mm - w/o gearbox Characteristics brushless dc motor 24..36 V - CANopen DS301 interface - L = 122 mm - w/o gearbox Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network

More information

Quantum Series Size 17, 23, 34 and 56 Brushless Servo Motors Frameless and Housed Engineering Guide

Quantum Series Size 17, 23, 34 and 56 Brushless Servo Motors Frameless and Housed Engineering Guide MACCON GmbH Kübachstr.9 D-81543 München Tel +49-89-65122()-21 Fax +49-89-655217 Quantum Series Size 17, 23, 34 and 56 Brushless Servo Motors Frameless and Housed Engineering Guide Selection Guide Quantum

More information

Drive technology for AC and DC

Drive technology for AC and DC Drive technology for AC and DC version 2011 The engineer s choice Innovations for the future The right product for every requirement Trendsetters in drive technology Welcome to ebm-papst, the leaders and

More information

Series 7000 Torque Sensor for PTO-shafts

Series 7000 Torque Sensor for PTO-shafts Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional

More information

Series 7000 Torque Sensor for PTO-shafts

Series 7000 Torque Sensor for PTO-shafts Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional

More information

ILE1F661PB1A0 brushless dc motor V - CANopen DS301 interface - L = 122 mm - w/o gearbox

ILE1F661PB1A0 brushless dc motor V - CANopen DS301 interface - L = 122 mm - w/o gearbox Characteristics brushless dc motor 24..36 V - CANopen DS301 interface - L = 122 mm - w/o gearbox Product availability : Stock - Normally stocked in distribution facility Price* : 840.00 USD Main Range

More information

Motor/Drive Configuration

Motor/Drive Configuration ZX900 Electrical Specifications Input Power Output Power Electrical specifications for the ZX900 series drive's input and output power are provided in this section. Voltage (Nominal) Voltage (Range) Frequency

More information

Silencer Series Brushless DC Motors

Silencer Series Brushless DC Motors TYPICAL APPLICATIONS Medical equipment - pumps, blowers and electric scooters and wheelchairs Automatic door and window openers Computer-controlled embroidery machines Scanners Packaging equipment and

More information

RadiPac EC centrifugal fans. New dimensions in efficiency: sizes 630 1,000

RadiPac EC centrifugal fans. New dimensions in efficiency: sizes 630 1,000 RadiPac EC centrifugal fans. New dimensions in efficiency: sizes 630 1,000 A coherent concept. RadiPac stands for Realistic performance specifications, as the performance data of the entire fan is continuously

More information

Permanent magnet brakes. Safety from the market leader. PM Line High Torque Line

Permanent magnet brakes. Safety from the market leader. PM Line High Torque Line Permanent magnet brakes Safety from the market leader PM Line High Torque Line Industrial Drive Systems Die Welt von Kendrion Industrial Drive Systems Kendrion The brake experts As a solution provider,

More information

3242 G 024 BX4 CS/CC 24 3,6 18,2 77,3 1,6 / 12,4 9 / ball bearings, preloaded 0,015. stainless steel 370 electronically reversible

3242 G 024 BX4 CS/CC 24 3,6 18,2 77,3 1,6 / 12,4 9 / ball bearings, preloaded 0,015. stainless steel 370 electronically reversible Brushless DC-Servomotor with integrated Motion Controller and or CN interface 6 mnm For combination with Gearheads: 3/1, 32, 32/3, 32/3 S, 38/1, 38/1 S, 38/2, 38/2 S 3242... BX4 CS/CC 1 2 3 4 Nominal voltage

More information

Application Information

Application Information Moog Components Group manufactures a comprehensive line of brush-type and brushless motors, as well as brushless controllers. The purpose of this document is to provide a guide for the selection and application

More information

LSP Servomotors. Order Catalogue. Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm

LSP Servomotors. Order Catalogue. Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm LSP Servomotors Order Catalogue Series: LSP servomotors Stall torque: 0.18 to 18.5 Nm ID no.: 0814.8B.0-01 Date: 10/01 Subject to technical change without notice. The German version is the original of

More information

Online data sheet DFS60B-S4CA08192 DFS60 INCREMENTAL ENCODERS

Online data sheet DFS60B-S4CA08192 DFS60 INCREMENTAL ENCODERS Online data sheet DFS60B-S4C08192 DFS60 B C D E F Illustration may differ Detailed technical data Performance Ordering information Type Part no. DFS60B-S4C08192 1038099 Other models and accessories www.sick.com/dfs60

More information

DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient.

DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient. DYNASYN DD servo motors. Dynamic. Compact. Energy-efficient. B E N E F I T S Maximum dynamic response Increased energy efficiency High cost effectiveness Long service life Single-cable solution 2 DYNASYN

More information

Electric Mini Slides MSC-EL

Electric Mini Slides MSC-EL Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6

More information

QMOT Motor QBL4208 Manual 42mm QMOT BLDC motor family

QMOT Motor QBL4208 Manual 42mm QMOT BLDC motor family QMOT Motor QBL4208 Manual 42mm QMOT BLDC motor family Trinamic Motion Control GmbH & Co. KG Sternstraße 67 D 20357 Hamburg, Germany http://www.trinamic.com QBL4208 Manual (V1.01 / 2008-04-01) 2 Table of

More information

SINAMICS SM150. 4/2 Overview. 4/2 Benefits. 4/2 Design. 4/6 Function. 4/8 Selection and ordering data. 4/8 Options

SINAMICS SM150. 4/2 Overview. 4/2 Benefits. 4/2 Design. 4/6 Function. 4/8 Selection and ordering data. 4/8 Options /2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /1 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions

More information

Compact, dynamic and rugged

Compact, dynamic and rugged Compact, dynamic and rugged Direct drives for harsh operation conditions SIOTICS T Heavy Duty Torque otors Brochure Edition arch 2016 SIOTICS T Heavy Duty Torque otors Overview In many machining processes

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated

More information

AC axial fan. sickled blades (S series), single inlet Wall ring with guard grille

AC axial fan. sickled blades (S series), single inlet Wall ring with guard grille WE5-CO5-66 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

3-phase stepping motors

3-phase stepping motors General Series of Features from Berger Lahr are: Powerful because the optimised internal geometry results in a high power intensity, meaning up to 50 % more torque than standard stepping motors of comparable

More information

2232 S 024 BX4 CSD/CCD 24 12,4 6,4 67,7 2 / 17 4,1 / ball bearings, preloaded 0,015. stainless steel 77 electronically reversible

2232 S 024 BX4 CSD/CCD 24 12,4 6,4 67,7 2 / 17 4,1 / ball bearings, preloaded 0,015. stainless steel 77 electronically reversible NEW Brushless DC-Servomotor with integrated Motion Controller and or CN interface 18 mnm For combination with Gearheads: 22F, 22/7, 26 2232... BX4 CSD/CCD 1 2 3 4 Nominal voltage Terminal resistance, phase-phase

More information

SINAMICS GM150 IGCT version

SINAMICS GM150 IGCT version /2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /14 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions

More information

Lexium integrated drives

Lexium integrated drives Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.

More information

Kollmorgen Frameless Motor Selection Guide

Kollmorgen Frameless Motor Selection Guide Kollmorgen Frameless Motor Selection Guide KBM Series Brushless Motors Kollmorgen. Every solution comes from a real understanding of OEM challenges. The ever-escalating demands of the marketplace mean

More information

ILE2T661PB1A3 brushless dc motor V - Modbus TCP interface - L = 174 mm - 54:1

ILE2T661PB1A3 brushless dc motor V - Modbus TCP interface - L = 174 mm - 54:1 Characteristics brushless dc motor 24..48 V - Modbus TCP interface - L = 174 mm - 54:1 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1540.00 USD Main Range of

More information

RadiPac EC radial impellers Perfection in air handling

RadiPac EC radial impellers Perfection in air handling RadiPac EC radial impellers Perfection in air handling The engineer s choice One-stop shopping A coherent concept RadiPac stands for... Real Information - The performance documentation for the entire fan,

More information

ILA2D572TC1F0 integrated drive ILA with servo motor V - DeviceNet - indus connector

ILA2D572TC1F0 integrated drive ILA with servo motor V - DeviceNet - indus connector Characteristics integrated drive ILA with servo motor - 24..48 V - DeviceNet - indus connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Phase

More information

Press News. Silent, dynamic and powerful: The new motor series ECI Compact by ebm-papst

Press News. Silent, dynamic and powerful: The new motor series ECI Compact by ebm-papst Press News Silent, dynamic and powerful: The new motor series ECI 42.40 Compact by ebm-papst All-inclusive: The turn-key drive solutions The electronically commutated ECI 42.40 Compact, with a nominal

More information

E180 DIAMETER FRAMES

E180 DIAMETER FRAMES E18 DIAMETER FRAMES MODEL NUMBER CODE...E18 FRAME To construct a motor listing, select the combination of features required and put all the coded information in the proper sequence. Please account for

More information

PKS-FD Servo System

PKS-FD Servo System PKS-FD123-01 Servo System FEATURES 24-70VDC of 0.32 Nm Power Ratings up to 100 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6500 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available Position,

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

Kollmorgen Frameless Motor Selection Guide

Kollmorgen Frameless Motor Selection Guide Kollmorgen Frameless Motor Selection Guide KBM Series Brushless Motors Kollmorgen. Every solution comes from a real understanding of OEM challenges. The ever-escalating demands of the marketplace mean

More information

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction / Main spindle motors for SIMODRIVE 611 / Introduction /4 Main spindle motors for SIMODRIVE 611 1PH motors with solid shaft/forced ventilation /18 Main spindle motors for SIMODRIVE 611 1PH4 motors with

More information

Online data sheet DFS60B-S4EL00800 DFS60 INCREMENTAL ENCODERS

Online data sheet DFS60B-S4EL00800 DFS60 INCREMENTAL ENCODERS Online data sheet DFS60B-S4EL00800 DFS60 B C D E F Illustration may differ Detailed technical data Performance Ordering information Type Part no. DFS60B-S4EL00800 1053600 Other models and accessories www.sick.com/dfs60

More information

DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful.

DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful. DYNASYN Hightorque-Servomotors DT Dynamic. Compact. Powerful. Top-class dynamic response: DT compact high-torque motors The DYNASYN DT series of high-torque motors meets the highest requirements made by

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

Introduction. Remark:

Introduction. Remark: M O T O R S B R U S H L E S S D C Introduction NMB Minebea is a world leader in the design and manufacture of precision brushless DC motors and stepping motors. The company offers a broad range of standard

More information

For air / gas dampers and control valves of oil or gas burners

For air / gas dampers and control valves of oil or gas burners 7 803 Actuators For air / gas dampers and control valves of oil or gas burners SQN13.xxxB9 SQN14.xxxB9 Electromotoric actuators Torque: Up to 1 Nm rated output torque Direction of rotation: - SQN13 Counterclockwise

More information

antriebstechnik Standard Modular System 2011 NEMA connections it s time for tomorrow

antriebstechnik Standard Modular System 2011 NEMA connections it s time for tomorrow antriebstechnik Standard Modular System 2011 NEMA connections it s time for tomorrow NEMA-Connection for spur and planetary gearheads Flexibility for many applications: The intelligent modular system.

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA Table of contents 1. Three-phase asynchronous motor DA 100-280... 5 1.1. General technical data... 5 1.2. General safety instructions... 6 1.3. Definitions of power ratings... 7 1.3.1. Definitions of power

More information

Servo Motors. Unimotor hd, Unimotor fm, NT Series and XV Series lb-in ( Nm) 230 V 460 V

Servo Motors. Unimotor hd, Unimotor fm, NT Series and XV Series lb-in ( Nm) 230 V 460 V Servo Motors Unimotor hd, Unimotor fm, NT Series and XV Series 0.9-1204 lb-in (0.11-136 Nm) 230 V 460 V Contents Introduction: A Servo Motor for Every Application... 1 Drive and Motor Selection... 3 Electronic

More information

Linear Motors & Servo Drives 3x400VAC. Linear Motor Series P The linear motor technology for industrial applications. Peak force up to 2 500N

Linear Motors & Servo Drives 3x400VAC. Linear Motor Series P The linear motor technology for industrial applications. Peak force up to 2 500N Linear Motors & Servo Drives 3x400VAC Linear Motor Series P10- Peak force up to 2 500N Velocity up to 5m/s Acceleration up to 100g Free positioning Long life: Linear direct drive The linear motor technology

More information

E280 DIAMETER FRAMES

E280 DIAMETER FRAMES E28 DIAMETER FRAMES MODEL NUMBER CODE...E28 FRAME To construct a motor listing, select the combination of features required, and put all the coded information in the proper sequence. Please account for

More information

Customised drive solutions

Customised drive solutions Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous

More information

AC centrifugal fan. backward curved

AC centrifugal fan. backward curved RE8-CB8- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Brushless servo motors as replacements for conventional disk armature motors

Brushless servo motors as replacements for conventional disk armature motors MC 17-Bl MC 23-Bl Brushless servo motors as replacements for conventional disk armature motors 1 MOTOR TECHNOLOGY LTD MOTEC HOUSE, CHADKIRK BUSINESS PARK, STOCKPORT, CHESHIRE SK6 3NE ENGLAND TEL: +44 (0)161

More information

BTD - BCR. Synchronous Servomotors PRODUCT

BTD - BCR. Synchronous Servomotors PRODUCT BTD - BCR Synchronous Servomotors PRODUCT Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established in Bologna, Italy, the company that still bears

More information

For air dampers and control valves of oil or gas burners

For air dampers and control valves of oil or gas burners 7 813 Actuators For air dampers and control valves of oil or gas burners SQM33... Electromotoric actuators Torques: - SQM33.4 up to 1.2 Nm nominal output torque - SQM33.5 up to 3 Nm nominal output torque

More information

AC centrifugal module - RadiCal

AC centrifugal module - RadiCal KE5-RA- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of

More information

contents about the range

contents about the range contents Overview 3 Motor data PBL42 4 PBL60 5 PBL86 6 Technical information 7 Controller data S controller 9 N and B controllers 10 50B controller 12 EMC Directive compliance 13 Geared motors PBL42 motor

More information

Datasheet. Pitch Motor PMSM SP190F8

Datasheet. Pitch Motor PMSM SP190F8 Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor

More information

Lenze. Global Drive 9300 servo inverters kw

Lenze. Global Drive 9300 servo inverters kw 401 870 Global Drive 9300 servo inverters 0.37 75 kw 9300 servo inverter flexible and modern automation High-performance 9300 servo inverters with a matching motor program form a perfect drive system.

More information

Lexium integrated drives

Lexium integrated drives Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless

More information

ILE1B661PC1A1 brushless dc motor V - Profibus DP interface - L = 174 mm - 18:1

ILE1B661PC1A1 brushless dc motor V - Profibus DP interface - L = 174 mm - 18:1 Characteristics brushless dc motor 24..36 V - Profibus DP interface - L = 174 mm - 18:1 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1640.00 USD Main Range

More information

Introduction. The high quality of our products is achieved by a continuous and permanent quality control.

Introduction. The high quality of our products is achieved by a continuous and permanent quality control. MOTORS B R U S H L E S S D C Introduction NMB Minebea is a world leader in the design and manufacture of precision brushless DC motors and stepping motors. The company offers a broad range of standard

More information

AC centrifugal fan. backward curved

AC centrifugal fan. backward curved RE-AB6- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V

Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V Unimotor fm 230 V 460 V Unimotor fm 230 V / 460 V Flexible Configuration C Servo Motors Flexible Configuration C Servo Motors Unimotor fm is a high performance, brushless C Servo motor range matched for

More information

Product Data Sheet 4118 N/ The engineer's choice

Product Data Sheet 4118 N/ The engineer's choice The engineer's choice 4118 N/12-190 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Operating Data - Electrical

More information

KNC-PKS-FD S-AAK-DKH

KNC-PKS-FD S-AAK-DKH KNC-PKS-FD123-02 - Servo System FEATURES 24-70VDC of 90 oz-in Power Ratings up to 200 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6000 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available

More information

Product Data Sheet 3214 JH3-195

Product Data Sheet 3214 JH3-195 3214 JH3-195 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 6

More information

AC centrifugal fan. forward-curved, dual-intake with housing (without flange)

AC centrifugal fan. forward-curved, dual-intake with housing (without flange) DE-AM7-65 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of

More information

Scroll down to view your document!

Scroll down to view your document! Over 100 years cumulative experience 24 hour rush turnaround / technical support service Established in 1993 The leading independent repairer of servo motors and drives in North America. Visit us on the

More information

Product Data Sheet 4184 N/17X. The engineer's choice

Product Data Sheet 4184 N/17X. The engineer's choice Product Data Sheet 4184 N/17X The engineer's choice 4184 N/17X INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical

More information

Product Data Sheet 8412 N/ The engineer's choice

Product Data Sheet 8412 N/ The engineer's choice The engineer's choice 8412 N/12-252 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical Interface - Output...

More information

Low voltage AC drives

Low voltage AC drives General machinery drives Main features and dimensions Unique features Fast and extensive I/O PID control Application macros Many installation possibilities 200 to 480 V, 1-phase or 3-phase More value for

More information

AC centrifugal fan. forward curved, dual inlet with housing (flange)

AC centrifugal fan. forward curved, dual inlet with housing (flange) DE-AM7- ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

AC centrifugal fan. forward curved, dual inlet with housing (flange)

AC centrifugal fan. forward curved, dual inlet with housing (flange) ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone: +49(0)7938/81-0 Fax: +49(0)7938/81-110 info1@de.ebmpapst.com www.ebmpapst.com Nominal data Type Motor D2E133-AM47-23 M2E068-DF Phase

More information

ILA1F572PB1F0 integrated drive ILA with servo motor V - CANopen - PCB connector

ILA1F572PB1F0 integrated drive ILA with servo motor V - CANopen - PCB connector Characteristics integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1860.00 USD Main Range

More information

AC axial fan. sickled blades (S series) Wall ring with guard grille

AC axial fan. sickled blades (S series) Wall ring with guard grille W4E3-DN2-39 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County

More information

Index. Cable Brakemotor cable for decentralized MOVI SWITCH Catalog AC Motors DR , DT56, DR /EN 10/14

Index. Cable Brakemotor cable for decentralized MOVI SWITCH Catalog AC Motors DR , DT56, DR /EN 10/14 Index A AC motors Mounting position designations... 89 Additional documentation... 12 Add-on encoder cables... 579, 585 Anti-condensation heating... 500 B Backstop... 471 BE brake technical data... 375

More information

Standard servo motors of the HJ range...5. Options...6 Motor overview of HJ motors...7 Dimensional drawings...8

Standard servo motors of the HJ range...5. Options...6 Motor overview of HJ motors...7 Dimensional drawings...8 9- N Servo motors Contents Synchronous servo motors manufactured by Parker Hannifin, Electromechanical Division... Standard servo motors of the HJ range... Options... Motor overview of HJ motors...7 Dimensional

More information

Brushless Servo Motors

Brushless Servo Motors Quantum QB56 Series Housed Brushless Servo Motors NEMA Size 56 High Power Density, Sinusoidal BEMF Allied Motion s Quantum (QB) housed brushless servo motors are designed for use in precision servo applications

More information

1.4 inch (36mm) Series

1.4 inch (36mm) Series 1.4 inch (36mm) Series High performance slotless brushless motors for military, aerospace, medical, and commercial applications. Cog free design, low inductance and low inertia is ideal for precision servo

More information

Data Sheet. Size 1 and 2 Stepper Motors. 7.5 stepper motors Size 1 (RS stock no ) Size 2 (RS stock no ) Data Pack B

Data Sheet. Size 1 and 2 Stepper Motors. 7.5 stepper motors Size 1 (RS stock no ) Size 2 (RS stock no ) Data Pack B Data Pack B Issued November 005 1504569 Data Sheet Size 1 and Stepper Motors 7.5 stepper motors Size 1 (S stock no. 33-947) Size (S stock no. 33-953) Two 7.5 stepper motors each with four 1Vdc windings

More information

AC axial fan. sickled blades (S series) with full square nozzle

AC axial fan. sickled blades (S series) with full square nozzle WD5-GA-9 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart

More information

Datasheet. Pitch Motor PMSM SP190C8

Datasheet. Pitch Motor PMSM SP190C8 Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor

More information

Product overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)

Product overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK) 10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact

More information

Electromagnetic clutch-brake combinations INTORQ

Electromagnetic clutch-brake combinations INTORQ Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview

More information