PowerROC D55. Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 )
|
|
- Sherilyn Banks
- 6 years ago
- Views:
Transcription
1 PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 )
2 Power up your performance The PowerROC D55 is designed according to our philosophy of providing customers a reliable drill rig with high capacity, maximum uptime and simplicity in operation. Drill steel support for straight hole drilling. Spacious compartment with ergonomic design, providing high visibility during drilling as well as conformtable operation. Toe hole kit allows flexibility for different applications, such as side horizontal hole drilling, de-water hole drilling etc. Main benefits Ease of operation and maintenance in drilling applications High reliability due to straightforward design Hydraulic feed system mounted on a durable alumninum beam. Robust design and high productivity thanks to proven Atlas Copco technology Carousel rod handling system with deep hole capacity. The spacious operator cabin is ROPS and FOPS certified and is equipped with hydraulic pilot control joysticks. Hydraulic control system with focused performance giving easy and simple operation. 2 3
3 Technical specifications Easy to own PowerROC D55 is designed for easy maintenance with easy access to all service points. The overall design ensures high availability and ease of ownership. + Powerful and economical in drilling PowerROC D55 is equipped with an onboard Atlas Copco compressor delivering l/s of air up to a pressure of 20 bar for high penetration rates and ample flushing, ensuring straight and clean holes. The straightforward hydraulic design with robust piston pumps delivers productivity and reliability even in demanding applications. + DTH hammers strikingly efficient The PowerROC D55 can be equipped with a range of Atlas Copco downthe-hole hammers which are well known for their high performance in terms of speed and reliability. With high penetration rates and low fuel consumption per meter drilled; Atlas Copco s hammers make a positive impact on your bottom line. + Manoeuverability, mobility and safety in focus The PowerROC D55 crawler has excellent manoeuverability. The high ground clearance and fast tramming ability enables the rig to drill in tough terrain and achieve safe transportation on site. PowerROC D55 features a strong single section boom design, centrally located, which gives the operator a good view, offering easy and straightforward positioning for much straighter and more consistent holes. Main components Track frames with triple grouser pads and cleaning holes, hydraulic track oscillation and two speed traction Caterpillar turbo-charged diesel engine with Tier III compliance Atlas Copco screw type high pressure compressor Operator s cabin with air-conditioning, ROPS and FOPS certified Single section boom system Aluminum profile feed beam Hydraulic cylinder operated feed system Engine Caterpillar turbo-charged, diesel engine, CAT C11, Tier III/stage 3 Power rating at rpm 261 kw 350 HP Feed Feed extension mm 6 3 Feed rate, max 0.6 m/s 118 ft/min Feed force, max 40 kn lbf Tractive pull, max 50 kn lbf Total length mm Travel length mm 17 7 Dust collector Filter area 20 m sq.ft Number of filter elements 20 pcs. Cleaning air pressure, max 7.0 bar psi Cleaning air consumption 2 4 l/pulse 4 8 cfm Hydraulic system Hydraulic oil cooler Max ambient temperature 50 C 122 F Feed extension Carousel type rod handling system Break out table Dust collection system Pre-separator DTH hammer lubricator device (pneumatic) Thread greasing device Back up alarm Compressor Atlas Copco C146 + S1S, two stage screw type compressor Working pressure, max 20 bar 290 psi FAD, at normal working pressure l/s 575 cfm Electrical system Voltage 24 V Batteries 2 x 12 V, 200 Ah Alternator 24 V, 95 A Work lights, front 3 x 70 W Work lights, rear 2 x 70 W Work lights, feed 2 x 70 W Reverse buzzer Volumes Hydraulic oil tank 380 l 100 US gal Hydraulic system, total 470 l 124 US gal Compressor oil 63 l 16.6 US gal Diesel engine oil 30 l 7.9 US gal Diesel engine, cooling water 68 l 18 US gal Diesel engine, fuel tank 760 l 201 US gal Traction gear 3 l 0.8 US gal Lubrication tank (ECL) 20 l 5.3 US gal Atlas Copco service Even the best equipment requires regular service to ensure optimal performance. Atlas Copco provides + WORLD CLASS SERVICE service solutions to safeguard an optimized relationship between productivity, availability and opera- FlexiROC T35 and FlexiROC T40 are flexible and versatile tophammer drill rigs, developed and designed for high performance in demanding construction applications. They are tional cost. Atlas Copco Mining and Rock Excavation Technique has over technicians located in over also a very efficient alternative for small and medi um size 80 countries. By combining the usage of Atlas Copco quarrying jobs. Even in tough terrain conditions, utilization genuine parts with service provided by a certified Atlas Copco technician, you ll have a winning of the rig is high, thanks to the long reach of the boom, FlexiROC T35 and FlexiROC T40 are flexible and versatile combination no matter of where in the world you operate. Hole range Recommended DTH hammers and hole range PowerROC D55 COP 34, COP 44, COP 54, COP mm 3 9/16 6 1/2 Hydraulic tube handling system for max hole depth, with 5 m (16 4 ) tubes PowerROC D55 Ø mm Rod 29.4 m 96.5 Single pass drilling, max hole depth PowerROC D55 5 m 16.2 Rotary head Rotary head Connection thread *Hole range Max rpm Max torque, drilling Max torque, breaking Suitable for DTH hammer Nm lbf Nm lbf DRU 5 API 2 3/8 REG, box mm COP 34, COP 44, COP 54 DHR6 H 56 API 2 3/8 REG, box mm COP 34, COP 44, COP 54 *For the hole range mm, the optimal depth is 15 meters. 4 5
4 Technical specifications Technical specifications Down-the-hole hammer (to be ordered separately) Down-the-hole hammer Hole range Top sub thread Weight Length excl thread mm in Type and size Kg lbf mm in COP /16 4 1/8 API 2 3/8 REG pin ,4 COP /16 5 API 2 3/8 REG pin ,7 COP /4 6 API 2 3/8 REG pin ,1 COP /16 6 1/2 API 3 1/2 REG pin ,8 Coverage areas and swing angles 25º 2500 Dimensions and weight 4230 Transport dimensions Height (H1) mm º Length (L1) mm Width mm 98 Feed height PowerROC D55 (H) mm 370 Weight Standard unit excluding all optios and drill steel H1 Horizontal reach (mm) Toe-hole drilling reach PowerROC D kg lb L1 32º 95º H Optional equipment Carrier Hydraulic support leg Electric refueling pump Service lamps in canopy Cold weather kit +5ºC to -25 ºC, include diesel engine heater Cold weather kit -25 ºC and below, include diesel engine heater and ether start Lube oil, lube system and water mist system Central lubrication system(cls) Artic hydraulic oil, VG 32 Tropical hydraulic oil, VG 68 Biological hydraulic oil, VG 46 Water mist system, with water pump and 400 l water tank Vertical reach (mm) Feed swing angles Safety cabin Sun shade kit Radio Dust control Movable pre-separator Feed Service winch Dimension kit for 76mm tube Dimension kit for 89mm tube Dimension kit for 102mm tube Dimension kit for 114mm tube 6 7
5 a, Nanjing, China. Legal Notice Copyright 2017, Atlas Copco (Nanjing) Construction and Mining Equipment Co. Ltd. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. Committed to sustainable productivity We stand by our responsibilities responsibilties towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call Sustainable Productivity.
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction Hole diameter: 90 165 mm (39/₁₆" 6½") 1 Power up your performance The PowerROC D55 is designed according to our philosophy
More informationT50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6
powerroc T50 Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: 102 152mm / 4 6 trustful performer with striking efficiency Everything about
More informationpowerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying.
powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying. Hole diameter : 64 89mm (2 1/2 3 1/2 ) : 64 115mm (2 1/2 4 1/2 ) Power and performance Atlas Copco s
More informationFLEXIROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION FIELD
More informationFLEXIROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION YEARS OF
More informationFlexiROC T35 & T40. Surface drill rigs for quarrying and construction. FlexiROC T35 Hole diameter: mm (2 1/2 4 1/2 )
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 Hole diameter: 64 115 mm (2 1/2 4 1/2 ) FlexiROC T40 Hole diameter: 64 127 mm (2 ½ 5 ) Flexible rigs for all occasions
More informationSMARTROC D60. Surface drill rig for aggregate and limestone quarries, surface mining and construction. Hole diameter mm (4 5/16 7 )
SMARTROC D60 Surface drill rig for aggregate and limestone quarries, surface mining and construction Hole diameter 110 178 mm (4 5/16 7 ) SMART IS THE NEW ROBUST A SMART DRILLING SOLUTION, BUILT ON A ROBUST
More informationPowerROC T35. Surface drill rig for construction and quarrying Hole diameter: mm (2½" 4½")
PowerROC T35 Surface drill rig for construction and quarrying Hole diameter: 64 115 mm (2½" 4½") 1 Power and performance Epiroc s PowerROC rigs truly live up to their names with enough muscles for tough
More informationPowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.
PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. Hole diameter: 51 89 mm( (2" 3½") 1 Powerful and effective If you re looking
More informationFlexiROC T35 & T40 Surface drill rigs for quarrying and construction
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 hole diameter: 64 115 mm (2.5 4.5 ) FlexiROC T40 hole diameter: 64 127 mm (2.5 5 ) Flexible rigs for all occasions For
More informationSmartROC D50 and D55 DTH surface drill rig for quarrying and mining
SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 hole diameter: 90 130 mm (3.5 5.1") SmartROC D55 hole diameter: 90 152 mm (3.5 6") Drill rigs with intelligence and power
More informationFlexiROC D60/D65 Surface drill rig for quarrying and construction
FlexiROC D60/D65 Surface drill rig for quarrying and construction FlexiROC D60 hole diameter: 110 178 mm (4.3" 7") FlexiROC D65 hole diameter: 110 203 mm (4.3" 8") A rig you can rely on The FlexiROC D60
More informationPowerROC T25 DC Surface drill rig for drill site construction civil engineering, small aggregate and limestone quarrying.
PowerROC T25 DC Surface drill rig for drill site construction, civil engineering, small aggregate and limestone quarrying. Hole diameter: 51 89 mm (2" 3½") 1 Your way to success The PowerROC T25 DC uses
More informationFlexiROC T15 R Surface drill rig for quarrying and construction
FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.
More informationSMARTROC D65. Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining.
SMARTROC D65 Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining. Hole diameter 110 203 mm (4 5/16 8") THE MINING MASTERMIND THE SMARTROC
More informationFLEXIROC T35,T40 SPEEDROC D30. Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2
FLEXIROC T35,T40 Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2 SPEEDROC D30 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone
More informationSMARTROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½ 5 )
SMARTROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½ 5 ) Fixed boom Hole diameter: 89 140 mm (3½ 5½ ) SMART AND PRECISE EFFICIENCY With the SmartROC
More informationFlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Pioneering productivity The FlexiROC T30 R quarry edition is a tophammer rig designed
More informationSmartROC CL Surface drill rig for open pit mining and selective mining
SmartROC CL Surface drill rig for open pit mining and selective mining Hole diameter: 115 216 mm (4.5 8.5 ) The SmartROC CL is built to beat the rock The fuel-efficient SmartROC CL is one of the most powerful
More informationSMARTROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½ 5 )
SMARTROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½ 5 ) Fixed boom Hole diameter: 89 140 mm (3½ 5½ ) SMART AND PRECISE EFFICIENCY WITH THE SMARTROC T45
More informationPowerROC T45. Surface drill rig for quarrying and construction Hole diameter: mm( (3" 5")
Surface drill rig for quarrying and construction Hole diameter: 76 127 ( (3" 5") 1 Power built in The gives you high reliability and power worthy its name. Thanks to its compact structure and high manoeuvrability,
More informationFlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Extend your reach and versatility The FlexiROC T30 R Construction Edition is a tophammer
More informationPowerROC T30 E Surface drill rig for quarrying and construction
PowerROC T30 E Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (3.5 5.5 ) Stronger than ever With a robust engine and a reach of 4.3 meters the PowerROC T30 E takes your performance
More informationFLEXIROC T30 R. Construction Edition. Hole diameter: mm (1 3/4 3 1/2 )
FLEXIROC T30 R Construction Edition Hole diameter: 45 89 mm (1 3/4 3 1/2 ) EXTEND YOUR RECH ND VERSTILITY THE FLEXIROC T30 R CONSTRUCTION EDITION IS TOPHMMER RIG DESIGNED FOR WIDE RNGE OF DRILLING PPLICTIONS.
More informationFlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction
FlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction Folding boom hole diameter: 38 64 mm (1½ 2½ ) Improve your speed and accuracy The FlexiROC T25 R construction edition
More informationFlexiROC T20 R A drill rig for surface- and underground construction
FlexiROC T20 R A drill rig for surface- and underground construction Hole diameter: 38 64 mm (1.5 2.5 ) Multi-purpose without compromise The FlexiROC T20 R (MK II) is the construction contractor s new
More informationSmartROC T45 Surface drill rig for quarrying and construction
SmartROC T45 Surface drill rig for quarrying and construction Folding boom hole diameter: 89 127 mm (3,5" 5") Standard boom hole diameter: 89 140 mm (3,5" 5,5") Smart and precise efficiency With the SmartROC
More informationSmartROC C50 Surface drill rig for quarrying, mining and construction
SmartROC C50 Surface drill rig for quarrying, mining and construction Hole diameter: 90 140 mm (3.5 5.5") 1 Speed, power and precision The SmartROC C50 from Epiroc gives you the best of both worlds. The
More informationSpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry.
SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry. Hole diameter: 70 105 mm (2.75" 4.25") Speed up your profits SpeedROC D30 is a versatile and flexible
More informationSmartROC T35 & T40 Surface drill rigs for quarrying and construction
SmartROC T35 & T40 Surface drill rigs for quarrying and construction SmartROC T35 hole diameter: 64 115 mm (2.5" 4.5") SmartROC T40 hole diameter: 76 127 mm (3" 5") World champion of fuel efficiency SmartROC
More informationAtlas Copco Surface drill rig. ROC F7 Recommended hole range mm (3" 4 1 /2")
Atlas Copco Surface drill rig ROC F7 Recommended hole range 76 5 mm (3" /") Power and economy in perfect harmony Atlas Copco s ROC F7 surface crawler is an excellent example of company philosophy. A philosophy
More informationAtlas Copco Pneumatic Surface Drill Rig ROC 442PC. Tophammer Crawler Rig. Hole range mm (1 5 / / 2 )
Atlas Copco Pneumatic Surface Drill Rig ROC 442PC 3 8 Tophammer Crawler Rig Hole range 41 115 mm (1 5 / 8 4 1 / 2 ) ROC 442PC the Workmate A tophammer crawler rig for 41 115 mm (1 5 /8 4 1 /2 ) holes.
More informationMEYCO ME3. Concrete Spraying Mobile for medium sized tunnels
MEYCO ME3 Concrete Spraying Mobile for medium sized tunnels VERSATILE CONCRETE SPRAYING APPLICATION EXPERTISE UNIFIED FOR HIGH QUALITY, ECONOMICAL AND SAFE APPLICATION OF SPRAYED CONCRETE. MAIN BENEFITS
More informationChristensen CT20. Surface core drill rig for mineral exploration
Christensen CT20 Surface core drill rig for mineral exploration MODERN DEEP HOLE DRILLING Christensen CT20 has a drilling depth capacity of 2 450 meters. The rig comes truck mounted or crawler mounted,
More informationMEYCO ME5. Mobile concrete spraying for large sized tunnels
MEYCO ME5 Mobile concrete spraying for large sized tunnels DEPENDABLE CONCRETE SPRAYING ACCURATE ECONOMICAL CONCRETE SPRAYER. BETTER THAN EVER Productivity heightened with improved pumping efficiency Accuracy
More informationBOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2
BOOMER S Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2 w GROUND-BREAKING PRODUCTIVE DRILLING THE BOOMER S1 IS A FACE DRILLING RIG FOR MINING AND TUNNELLING.
More informationBOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE
More informationBOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m²
BOOMER E1/E2 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m² FOR POWER AND PRODUCTIVITY THE BOOMER E1 AND BOOMER E2 RIGS HAVE EXTENSIVE COVERAGE
More informationBOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE
More informationECM-720 CM-760D CM-780D
Setting The Pace Hydraulic Crawler Drills ECM-720 CM-760D CM-780D HOLE QUALITY PENETRATION RATE ACCESSORY LIFE Tough Enough To Lead, Highest Quality Atlas Copco crawler drills are designed and manufactured
More informationBoomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²
Boomer T1 Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Prime performance packed into a small, versatile unit The Boomer T1 is an ideal rig for narrow vein
More informationSIMBA MAIN BENEFITS. FOPS and ROPS approved cab for a safe and comfortable operator environment
SIMBA E7-SERIES Hydraulic long hole production drill rig for medium to large size drifts, with excellent cover area and flexibility. Hole range from 51 up to 127 mm. SIMBA PRODUCTION DRILLING IN MEDIUM
More informationBOOMER M-SERIES. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2.
BOOMER M-SERIES Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2. RELOADED TO MEET YOUR CONDITIONS THE BOOMER M-SERIES FACE DRILLING RIGS HAVE BECOME A KEY PIECE
More informationSimba K102 production drill rig. Hydraulic production drill rig for long-hole mining
Simba K102 production drill rig Hydraulic production drill rig for long-hole mining 1 Get into your tunnel The simple and practical Simba k102 is a long-hole production drill rig for small to medium-drift
More informationWelcome to Sandvik Construction A world leader in Construction
Welcome to Sandvik Construction A world leader in Construction 1 Welcome to Sandvik Construction Safety first Safety is our top priority Protective Equipment Emergency Number Emergency Exit Assembly Point
More informationROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter
ROBBINS 53RH C Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter SMART IN THE UPS AND DOWNS OF DRILLING THE ROBBINS 53RH C IS A UNIQUE MULTIPURPOSE RAISE DRILL, ABLE TO
More informationBOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2
BOOMER T Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2 PRIME PERFORMANCE PACKED INTO A SMALL, VERSITILE UNIT THE BOOMER T1 D IS AN IDEAL RIG FOR NARROW VEIN
More informationBoltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions
Boltec S Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions 1 Making mining safe Boltec S is a fully mechanized rock bolting rig suitable
More informationBoomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Cutting costs and boosting productivity
More informationROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
More informationBoomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2
Boomer 281 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationBoomer XL3 D face drilling rig
Boomer XL3 D face drilling rig Three-boom tunneling drill rig for large sized underground tunnels and cross sections, with maximum coverage area 178 m 2 1 A giant of high penetration Boomer XL3 D is a
More informationBoltec M. A fully mechanized rock bolting rig for bolt lengths from m and heights up to 9.5 meters
Boltec M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m and heights up to 9.5 meters 1 Making mining safe A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 meters.
More informationBoomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs
More informationBoltec E. Fully mechanized rock bolting rig for bolt lengths from meters, effective in roof heights up to 13 meters
Boltec E Fully mechanized rock bolting rig for bolt lengths from 2.4-6 meters, effective in roof heights up to 13 meters 1 Making mining safe Boltec E is a fully mechanized rock bolting rig suitable for
More informationBOLTEC M. A fully mechanized rock bolting rig for bolt lengths from m heights up to 9.5 meters
BOLTEC M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m heights up to 9.5 meters BOLTEC M MAKING MINING SAFE A FULLY MECHANIZED ROCK BOLTING RIG FOR BOLT LENGTHS FROM 1.5-3.5 METERS.
More informationECM-720 CM-760D CM-780D
Setting The Pace Hydraulic Crawler Drills ECM-720 CM-760D CM-780D HOLE QUALITY PENETRATION RATE ACCESSORY LIFE COLLAR SOFT ROCK Strata-Sense Drill Automatics Optimization of drilling speed, hole straightness
More informationBoomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2
Boomer 281-15 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationSIMBA M6. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBA M6 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA HIGH PRECISION SOLUTION THE STURDY SIMBA M6 IS A LONG-HOLE PRODUCTION
More informationROBBINS 73-SERIES. Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter
ROBBINS 73-SERIES Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter RAISEBORING SPECIALIST ROBBINS 73 RIGS ARE THE STURDIEST, MOST WIDELY SOLD RAISEBORING RIGS IN
More informationSIMBA M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBA M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA THE STURDY SIMBA M4 IS A LONG-HOLE PRODUCTION DRILL RIG FOR MEDIUM TO
More informationBoomer E1-DH. Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2
Boomer E1-DH Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2 1 For power and productivity The Boomer E1-DH rig has extensive coverage areas of
More informationMAIN BENEFITS. Reverse camera to enhance good visibility for the operator when transporting the drill rig
SIMBA E6-W(WL) Hydraulic long hole production drill rigs for medium to large size mining, powerfull ITH- water hammer for long straight holes with high demand for hole quality. Hole range from 89 up to
More informationMD5075. Track Drill. General Data. Hole Depth Maximum 31 m ft. Compressor 9.9 m 3 /min 350 ft 3 /min Rock Drill HPR kw 25 hp
MD5075 Track Drill General Data Hole Diameter Range 76.2 mm-127 mm 3.0 in-5.0 in Hole Depth Maximum 31 m 102.5 ft Engine C9 Tier 3 224 kw (300 hp) at 1,800 rpm Compressor 9.9 m 3 /min 350 ft 3 /min Rock
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationLEOPARD DI650i TIME FOR A NEW LEADER
LEOPARD DI650i TIME FOR A NEW LEADER RELIABLE AND ROBUST MAIN COMPONENTS For over 50 years, we have claimed widespread expertise in developing drill rigs to meet your expectations. With that expertise,
More informationPOWER TO SUCCESS. SOOSAN TOP-HAMMER DRILL RIGS STD Series STD Series
www.soosanheavy.com STD Series STD Series Head office / Hwaseong Plant 109-2, Songsan-Ri, Yanggam-Myeon, Hwaseong-Si, Gyeonggi-Do, Korea TEL +82-31-350-5112 FAX +82-31-350-5259 Soosan China Soosan Machinery
More informationDRILLS. Caterpillar Performance Handbook Edition 44
DRILLS Caterpillar Performance Handbook Edition 44 800.47.4228 www.hawthornecat.com 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, Caterpillar Yellow, the
More informationPneumatic crawler drill
27 / 28 Pneumatic crawler drill CRAWLER ASSEMBLY The crawler uses parts designed and time tested by Furukawa. These include the track-link crawler chains and track rollers. The ruggedly constructed crawler
More informationWith Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More informationBoomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m²
Boomer L2 Hydraulically controlled face drilling rig with a coverage area up to 104 m² 1 Fast and efficient face drilling The Boomer L2 is a powerful hydraulically controlled face drilling rig for mining
More informationPower to success. Soosan Top-Hammer Drill Rigs
Power to success Soosan Top-Hammer Drill Rigs Soosan STD Series Enjoy the experience of drilling with a reliable companion The Soosan STD series hydraulic crawler drilling rigs, have been developed to
More informationSurface drilling rig. Explorac R50 on truck. Atlas Copco Exploration Products. Features
Atlas Copco Exploration Products Surface drilling rig Explorac R50 on truck It is a robust and reliable drill unit, making it ideal for remote areas. It is designed to perform an outstanding base platform
More informationSandvik DI600 Always a hole ahead
Sandvik DI600 Always a hole ahead Enjoy the power and precision EXPERIENCE FOR YOUR BENEFIT As the offspring of the well-known BPI Titon 600, the Sandvik DI600 DTH rigs are a result of 40 years experience
More informationMINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity
MINETRUCK MT431B Underground articulated truck with 28.1-metric tonne load capacity MINETRUCK MT431B RELIABLE UNDERGROUND HAULAGE THE MINETRUCK MT431B IS AN ARTICULATED UNDERGROUND TRUCK WITH A 28.1-METRIC
More informationBoomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m²
Boomer M-series Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² 1 Reloaded to meet your conditions The Boomer M-series face drilling rigs have become a key piece
More informationAtlas Copco Blasthole Drills DM-M3
Atlas Copco Blasthole Drills DM-M3 It all starts with the blasthole... and the blasthole starts with the DM-M3 power and performance. A unique patented feed system: Longer head travel with smaller cylinder
More informationBoomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m²
Boomer E1/E2 series Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m² 1 For power and productivity The Boomer E1 and Boomer E2 rigs have extensive coverage
More informationEC55D. Volvo Compact Excavators t 36.5 kw
EC55D Volvo Compact Excavators 5.4-5.63 t 36.5 kw A machine you can rely on Volvo s EC55D high quality compact excavator is designed to work harder for longer. Using high quality components and Volvo design,
More informationDiamec Smart 6 Core drilling rig
Diamec Smart 6 Core drilling rig Hole diameter: A, B, N and H Designed to perform Epiroc's advanced Rig Control System means the Diamec Smart 6 operates automatically. Drilling functions are easily performed
More informationBoomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
Boomer E3/E4 series Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² 1 For power and productivity Face drill rigs in the Boomer E3 and E4 series have
More informationDeltaBase 102 Technical Data Sheet
Release Date: Sept 16th 2008 Page 1 of 6 PRODUCT OVERVIEW The DeltaBase 102 Anchor drill rig for double-head drilling systems, rotary / percussion operations is specially designed for the following key
More informationBoomer S2. Robust face drilling rig with a coverage area up to 56 m 2
Boomer S2 Robust face drilling rig with a coverage area up to 56 m 2 1 Robust performace in a small package The Boomer S2 is our smallest mining and tunneling rig with intelligent control, now tougher
More informationExplorac 100 Reverse circulation drill rig for exploration drilling
Explorac 100 Reverse circulation drill rig for exploration drilling Hole diameter: 127 165 mm (5" 6.5") Fast and accurate Reverse circulation (RC) drilling represents a fast and economical way to retrieve
More informationSimba S7. Rugged rig with smart design and increased automation made for tight, tough conditions
Simba S7 Rugged rig with smart design and increased automation made for tight, tough conditions 1 Flexibility, versatility and reliability Maximize productivity in small spaces with the Simba S7. This
More informationSCOOPTRAM ST7 BATTERY
SCOOPTRAM ST7 BATTERY Power Unleashed Delivering unparalleled productivity, Scooptram is the most reliable underground loader on the market. The New Scooptram ST7 is fully battery powered and fully automation
More informationSCOOPTRAM ST7. Underground, small size loader with 6.8-tonne capacity
SCOOPTRAM ST7 Underground, small size loader with 6.8-tonne capacity SCOOPTRAM ST7 THE LATEST TECHNOLOGY IN NARROW VEIN MINING THE SCOOPTRAM ST7 IS A ROBUST LOADER THAT IS BUILT FOR DEMANDING UNDERGROUND
More informationRD20/RD20XC/APL DRILL RIGS. Oil and Gas Drilling atlascopco.com/rd20
RD20/RD20XC/APL DRILL RIGS Oil and Gas Drilling atlascopco.com/rd20 THE INDUSTRY STANDARD Approximately 300 RD20 s operating worldwide have earned a reputation for reliability, strength and drilling performance.
More informationMD6420. Rotary Blasthole Drill. 10 Meter Mast Configuration Rotary Drive System. Compressor (Standard) Operating Temperature
MD6420 Rotary Blasthole Drill 10 Meter Mast Configuration Rotary Drive System Hole diameter Up to 311 mm Up to 12.25 in Torque 0-15 185 N m 0-11, 200 lbf-ft Depth single pass Up to 10.29 m Up to 33 ft
More informationMINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity
MINETRUCK MT5020 Underground articulated truck with 50 -tonne load capacity MINETRUCK MT5020 FAST, EFFICIENT UNDERGROUND HAULAGE MT5020 IS AN ARTICULATED UNDERGROUND TRUCK WITH 50 METRIC TONNES LOAD CAPACITY.
More informationScooptram ST14. Underground loader with 14-tonne capacity
Scooptram ST14 Underground loader with 14-tonne capacity Scooptram ST14 Superior underground mucking The new Scooptram ST14 is full with new features that makes it more powerful and yet more fuel efficient.
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system 1 The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationTOP HAMMER DRILL RIGS ECD SERIES
www.everdigm.com TOP HAMMER DRILL RIGS ECD SERIES EVERDIGM is large sized company with $300M turnover manufacturing high-end Construction, Mining, and Special Purpose Vehicle in Korea. The products have
More informationMD5075. Track Drill. General Data. Hole Depth Maximum 31 m ft. Compressor 9.9 m 3 /min 350 ft 3 /min Rock Drill HPR kw 25 hp
MD5075 Track Drill General Data Hole Diameter Range 76.2 mm-127 mm 3.0-5.0 in Hole Depth Maximum 31 m 102.5 ft Engine C9 Tier 3 224 kw (300 hp) at 1,800 rpm Compressor 9.9 m 3 /min 350 ft 3 /min Rock Drill
More informationWith Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more
More informationScooptram ST2D. Underground diesel loader with 3.6 tonne load capacity
Scooptram ST2D Underground diesel loader with 3.6 tonne load capacity 1 Hardened loader For small and narrow vein mines A parallel boom design matched to an aggressive bucket configuration provides efficient
More informationScooptram ST2G. Underground diesel loader with 4 tonne load capacity
Scooptram ST2G Underground diesel loader with 4 tonne load capacity 1 Popular underground loader The scooptram ST2G is a popular choice for applications varying from mine development, production in small
More informationLX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.
LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview LX 4 GEO-TECHNICAL DRILL HIGH DRILLING POWER IN A SMALL PACKAGE, THE MULTIPURPOSE LX 4 IS AN ESSENTIAL TOOL ON TODAY'S JOB SITE Power and Versatility
More informationSandvik DP series Unleash the power
Sandvik DP series Unleash the power Proven productivity Rock-steady power. For the toughest drilling jobs Are you looking for a drill with the power and control to handle the toughest conditions in a mine
More informationDR460 blasthole drill
DR460 blasthole drill Class leader performance engineered In its class of blasthole drills, the DR460 is the benchmark for user approval, reliability, and drilling productivity. Its applications include
More information