PumpJet Thruster Systems

Transcription

1 Aqua Manoeuvra Systems A Division of Innovative Technologies Ltd. Ranging from our Standard BowJet to Full 360 degree Azimuthing Pumpjets designed for Maneuvering Assist or Full Vessel Propulsion, rated from 75 to 6000 Hp. Aqua Manoeuvra Systems introduces a series of Propulsion and Maneuvering PumpJet Systems designed to provide any type vessel maximum Maneuverability with Silent operation and Reliability. They are available in several configurations for different applications and vessel requirements. Series JT AMT-Thrusters manufacture a unique Series of PumpJet type Bow Thruster Systems, offering Dynamic Side Power for vessels into the 21 st Century. These Thruster Systems represent the latest advancement in technical design and are rated from 50 to 2500 horsepower and producing upto 50,000 pounds (22,725 kgf) of power Dynamic Thrust under Way and Conforming To New Environmental Rules and Regulations requiring redundancy and Zero Oil Spillage. Providing High Thrust efficiency of pounds (9 kgf) per horsepower. Utilizing A Nozzle Elastic Suspension System greatly reducing oscillations and noise and therefore ensuring Vibration-Free Operation

2 Aqua Manoeuvra Systems Page 2 of 6 have been installed on numerous ships of all types including Dredgers, Heavy Lift Vessels, Military Patrol Vessels (OPV s), Tugs and Super Yachts. The ability to Manoeuvra in heavy sea, currents or at slow speeds is important. Typical tunnel type bow thrusters lose effect with underway speeds of knots. JT - Series PumpJet Thruster Specifications Model Power Thrust Hp Kw Lbs Kgf JT JT JT JT JT JT JT JT Above: Model JT800 with Electric Drive Installed on a Heavy Lift vessel. Right: Model JT500 with Electric Drive installed on a Dredger

3 Aqua Manoeuvra Systems Page 3 of 6 Series AJP The Standard Series of Azimuthing PumpJet Systems, offered in three unique configurations and offering Maneuverability, Propulsion and Stand-by Propulsion for precise positioning, steering and EMERGENCY VESSEL CONTROL. The Azimuthing PumpJet Thruster Series is available in power ranges from 75 to 6000 horsepower ( kw), delivering High Bollard Pull, dynamic 360 degree, and bi-rotational thrust and is suitable for diesel, electric and hydraulic drive systems. Type 1 Type 2 Type 3 Azimuthing are the instrument for precise Maneuvering and Control providing: Emergency Steering when there is no steerageway, or rudder damage. During those periods of Emergency produced by groundings or collisions high winds or severe currents, the Azimuthing PumpJet Thruster System can still be used as a complement to the rudder or in severe cases provide back up propulsion. The Azimuthing PumpJet System is mounted with no vulnerable parts protruding past the ships hull. They will provide full thrust for both shallow and heavy draft vessels, are simple and therefore reliable with extended life. Advance Naval Technology For Patrol Vessels Effective Loitering Automatic Tracking and Dynamic Positioning Systems.

4 Aqua Manoeuvra Systems Page 4 of 6 Series APT The Azimuthing PumpJets are designed for Main Propulsion in the slow speed range (0-15 knots). They offer bollard pull thrust efficiency of lbs-f per horsepower. The thrust is directed in a full 360-degree direction, providing maximum maneuverability. Ideal for slow to medium speed ranges for tank barges, workboats, tugs, military landing craft, fishing boats and research vessels. Type I - To be installed with the intakes and discharge through the bottom of the vessel and within the ships lines. Available from 75 to 2500 horsepower Type II - To be installed with the intake on the ships bottom and the rotational nozzle assembly through the transom. Series JTR Rotatable PumpJet Drives designed as auxiliary propulsion and maneuverability in the slow end of the speed range. Typical applications are as bow or stern units providing propulsion, emergency steering and stand-by propulsion for shallow draft vessels (barges, dredgers etc.). Type I - The PumpJet input drive shaft is configured as a horizontal drive arrangement. Gear reduction, clutch etc., is normally supplied on the engine drive package. Type II - The PumpJet drive is vertical and can be configured as an L or Z-drive. Available from 75 to 2500 horsepower. The Azimuthing PumpJet Thruster System utilizes the latest Control Technology, Material Selection, can be furnished as complete systems and will provide OPTIMUM MANEUVERABILITY and RELIABILITY with SIMPLIFIED INSTALLATION and OPERATION. Fast Control of Magnitude - with Direction of Thrust - Silent - Robust Ruthlessly Reliable

5 Aqua Manoeuvra System Page 5 of 6 Series AMP The Azimuthing PumpJet Modules are normally deck mounted or designed as through hull units, mounted in a well, with the engine inside an enclosure or the hull and are suitable for dredgers, platforms for special work, diving, pipe laying, cable laying/repair, where maneuverability is a must, Semi-Submersible/Heavy Lift Vessels, FPSO s, FSU (floating storage units), Tank Barges, and used with dynamic positioning systems. Azimuthing PumpJet Modules provide high thrust ratios and can be designed to be completely removable for scheduled Maintenance, Cleaning or Repairs. Azimuthing PumpJet Modules can be driven by direct diesel drives, hydrostatic drives or electric motor (either dry or wet options). They offer either fixed or controllable pitch propeller options and provide full proportional thrust for slow speed propulsion and emergency steering. The reliability of Aqua Manoeuvra is complete and copes with all navigation areas, open sea, harbor and all weather conditions. Aqua-M Thruster Systems offers Engineered Propulsion for vessels of all types. We design, manufacture and support marine equipment that has a worldwide reputation as the standard of excellence in the industry. enough to give you excellent service. The Company has an experienced staff of technical personnel who are familiar with the demanding requirements of the ocean environment. We are small enough to give you personal attention, yet big

6 Aqua Manoeuvra Systems Page 6 of 6 We maintain an extensive inventory of spare parts ready for rapid air shipment to your location. We have sales and service representatives in many key locations around the world. Several of these representatives have systems and spare parts in stock for immediate delivery. We have a complete manufacturing facility, which includes a full CNC Machining Center for prototype development, manufacturing and assembly plus our test tank. Our in-house engineering department utilizes SolidWorks, TekSoft CAMWorks 2D/3D Mill, BobCAD/CAM and AutoCad, with ProCad (Propeller Design and Drafting Software); PropExpert (Propeller Selection and Analysis Software; and MAKASS (Program for Ka-series / Propeller and Nozzle Selection). In addition to our line of standard products, we invite customer inquiries for special systems or service. Please feel free to call on us for assistance in your application. We offer tailored designed systems to suit any application. This, in combination with evolutionary designs, will fulfill your every need for propulsion and effective side-power. We have over 30 years experience in the maritime propulsion world. Aqua Manoeuvra... Marine Thruster Systems United Arab Emirates Head Office 3 rd Floor, Spectrum Bldg. P.O. Box Dubai, U.A.E. Tel: Fax: info@ams-thrusters.com USA GPS - AMS One Riverway, Suite 1700 Houston, Texas USA Tel: Fax: info.usa@ams-thrusters.com Malaysia Germany GPS - AMS Level 8, Menara See Hoy Chan No. 374, Jalan Tun Razak Kuala Lumpur, Malaysia P.O. Box Kuala Lumpur, Malaysia Tel: Fax: info@ams-thrusters.com Ingenieurbuero AMS Schillerberg Sereetz Germany Tel: +49 (0) Fax: +49 (0) info.ger@ams-thrusters.com