STD 093/6/4. 01 Jun 2014 ULASAN UMUM BAGI DRAF MALAYSIAN STANDARDS YANG SEDANG DIBANGUNKAN, BAGI TEMPOH 1 JUN JULAI 2014

Transcription

1 STD 093/6/4 01 Jun 2014 ULASAN UMUM BAGI DRAF MALAYSIAN STANDARDS YANG SEDANG DIBANGUNKAN, BAGI TEMPOH 1 JUN JULAI 2014 Dengan segala hormatnya perkara di atas adalah dirujuk. Bersama sama ini disertakan senarai draf Malaysian Standards (MS) yang sedang dibangunkan seperti di Lampiran A dan senarai Malaysian Standard yang disyorkan untuk ditarik balik tanpa diganti seperti di Lampiran B untuk ulasan umum. Draf-draf dan Malaysian Standards tersebut adalah mengenai pelbagai barangan, proses-proses dan tatasusila amalan dalam pelbagai bidang industri yang dibangunkan di bawah Jawatankuasa Standard Perindustrian (ISC) di SIRIM Berhad. Jadual pecahan jumlah draf-draf dan Malaysian Standards tersebut mengikut ISC disertakan di lampiran. Penyediaan draf-draf Malaysian Standards serta pengesyoran bagi penarikan balik Malaysian Standards tersebut telah dibuat oleh jawatankuasa berkaitan yang ditubuhkan di SIRIM Berhad yang diwakili oleh pihak industri, kementerian, agensi-agensi kerajaan, institusi pengajian tinggi dan orang perseorangan yang pakar dalam bidang berkenaan. Sehubungan dengan itu, pihak SIRIM Berhad mengalu-alukan sebarang ulasan ke atas draf-draf dan penarikan balik Malaysian Standards tersebut. Bagi mereka yang bukan ahli bagi mana-mana ISC, draf-draf Malaysian Standards yang diterima pakai (adopted) dari standard ISO/IEC, ASTM dan EN boleh diperolehi dengan bayaran seperti tertera. Bayaran boleh dibuat secara tunai/cek dengan tambahan 10% bagi bayaran pos kepada SIRIM Berhad. Tuan/puan juga boleh menyemak dokumen tersebut secara percuma dengan datang sendiri ke Pusat Pengurusan dan Penyelidikan Standard, Tingkat 2, Bangunan 3, SIRIM Berhad. Draf-draf untuk ulasan umum boleh diperolehi daripada: SIRIM Berhad (u.p.: Pusat Pengurusan dan Penyelidikan Standard) Tel : / Fax : / stddevelop@sirim.my Website: SIRIM Berhad (Company No V) 1, Persiaran Dato Menteri Section 2, P. 0. Box Shah Alam MALAYSIA Tel: Hotline: Fax: Dimaklumkan juga bahawa draf-draf Malaysian Standards tersebut masih dalam peringkat penyediaan dan tertakluk kepada pindaan dan bukan digunakan untuk rujukan rasmi sebagai Malaysian Standards. Memandangkan draf-draf tersebut juga adalah hakcipta organisasiorganisasi yang berkenaan seperti STANDARDS MALAYSIA, ISO/IEC, ASTM dan CEN, tuan/puan adalah dilarang daripada membuat salinan dan mengedarkannya kepada pihak lain. Semua ulasan hendaklah sampai ke SIRIM Berhad selewat-lewatnya pada: 31 JULAI 2014

2 Kami juga berharap untuk mendapat kerjasama daripada pihak tuan/puan agar dapat membuat pautan laman sesawang organisasi tuan/puan kepada laman sesawang kami di bagi tujuan pemberitahuan kepada ahli pertubuhan dan organisasi tuan/puan. Kerjasama serta sokongan tuan/puan dalam perkara ini diharap akan dapat memajukan lagi aktiviti-aktiviti standardisasi negara kita. Sekian terima kasih. Yang ikhlas, Azlina Abd Latif Ketua Seksyen Operasi dan Sistem Standard Pusat Pengurusan dan Penyelidikan Standard SIRIM Berhad s.k. Pengurus Besar Kanan Pusat Pengurusan dan Penyelidikan Standard

3 JADUAL BAGI JUMLAH DRAF MALAYSIAN STANDARDS YANG SEDANG DIBANGUNKAN DAN MALAYSIAN STANDARDS YANG DISYORKAN UNTUK DITARIK BALIK TANPA DIGANTI UNTUK ULASAN UMUM BAGI TEMPOH 1 JUN JULAI 2014 KOD ISC TAJUK ISC BIL. DRAF MALAYSIAN STANDARDS YANG SEDANG DIBANGUNKAN BIL. MALAYSIAN STANDARDS YANG DISYORKAN UNTUK DITARIK BALIK TANPA DIGANTI A Pertanian 1 B Kimia dan Bahan C Kepentingan Pengguna D Bangunan, Pembinaan dan Kejuruteraan Awam 3 E Penjanaan, Transmisi dan Pengagihan Tenaga F Kejuruteraan Mekanikal 4 G Teknologi Maklumat, Komunikasi dan Multimedia 2 H Petroleum dan Gas 1 11 I Standard Halal J Plastik dan Barangan Plastik K Pembungkusan dan Logistik L Kenderaan Jalan M Pencegahan dan Keselamatan Kebakaran 1 N Getah dan Barangan Getah O Pengurusan Organisasi P Bahan Logam dan Barangan Separuh Siap Q Tekstil dan Pakaian R Peralatan Perubatan dan Kemudahan untuk Penjagaan Kesihatan S T U W Y Z Peralatan dan Aksesori Elektrik dan Elektronik Pelancongan, Pameran dan Perkhidmatan Mesra Makanan, Produk Makanan dan Keselamatan Makanan 1 Keselamatan dan Kesihatan Pekerjaan 1 Pengurusan Kualiti dan Penentuan Kualiti Pengurusan Alam Sekitar Jumlah 10 15

4 LIST OF DRAFT MALAYSIAN STANDARDS FOR PUBLIC COMMENT : 01/06/ /07/2014 LAMPIRAN A ISC A : Agriculture 1. 11A016R0 Production of Citrus greening disease free for Citrus (Citrus reticulata) planting material - Specification ISC D : Building, Construction and Civil Engineering 1. 10D036R1 Concrete roofing tiles and fittings for roof covering and wall cladding - Part 1: Specification (First revision) 2. 11D016R1 Concrete roofing tiles and fittings for roof covering and wall cladding - Part 3: Installation for roof covering (First revision) 3. 12D026R1 Concrete roofing tiles and fittings for roof covering and wall cladding - Part 2: Test methods (First revision) ISC G : Information Technology, Communications and Multimedia 1. 14G001R1 Information technology- Security techniques - Information security ( RM ) management systems - Requirements (ISO/IEC 27001:2013, IDT) 2. 14G002R1 ( RM ) Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013, IDT) ISC H : Petroleum and Gas 1. 14H003R1 Automotive fuels - Palm Methyl Esters (PME) for diesel engines - Requirements and test methods (First revision) ISC M : Fire Safety and Prevention 1. 11M014R0 Smoke and heat control systems - Part 10: Power supplies ISC U : Food, Food Products and Food Safety 1. 10U024R2 Dried crackers (keropok) from freshwater and marine fish, crustacean and molluscan shellfish - Specification (Second revision) ISC W : Occupational Safety and Health 1. 10W004R0 Safety in laboratories - Code of practice - Part 9: Storage of chemicals

5 LAMPIRAN B LIST OF MALAYSIAN STANDARDS PROPOSED FOR WITHDRAWAL (WITH NO REPLACEMENT) FOR PUBLIC COMMENT: 01/06/ /07/2014 No. MS no. MS title ISC 1. MS ISO 10823:2008 Guidelines for the selection of roller chain drives 2. MS ISO 606:2008 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets (Second revision) ISC approval Reason date F 20/3/2014 TC on Machinery and Components Engineering proposed to withdraw MS ISO 10823:2008 Guidelines for the selection of roller chain drives without replacement because it should be users for this product, but there is no sale of this MS ISO since it published in 2008 until now. Hence, the TC proposed to direct use of ISO and to withdraw MS ISO 10823:2008 without replacement. F 20/3/2014 TC on Machinery and Components Engineering proposed to withdraw MS ISO 606:2008 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets (Second revision) without replacement because it should be users for this product, but there is no sale of this MS ISO since it published in 2008 until now. Hence, the TC proposed to direct use of ISO and to withdraw MS ISO 606:2008 without replacement. 3. MS 774:1982 Industrial V - Belts F 20/3/2014 TC on Machinery and Components Engineering proposed to withdraw MS 774:1982 Industrial V - Belts without replacement because it should be a lot of user in V belts, but the user do not follow standard, they just replaced the V belt following the existing ones (type and shape). Maybe they just calculate the size and get it from the belt supplier. There is no sale of this MS since it published in 1982 until now. Hence, the TC proposed to withdraw MS 774:1982 without replacement. 4. MS ISO 2503:2007 Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998, IDT) 5. MS ISO :2007 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO :2006, IDT) 6. MS ISO :2007 Natural gas - Calculation of compression factor - Part 2: Calculation F 20/11/2013 Industries use other standards, such as: ASME, ANSI, JIS which depend on the requirement of equipment supply, for example: Japanese designed equipment according to JIS. At the moment, this standard is not cross-referred in any other standard and there is no sale of this MS Hence, the FMM- MIGMA SWO proposed to withdraw MS ISO 2503:2007 Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998, IDT). MS ISO :2007 Natural Gas - Calculation Of Compression Factor - Part 1: Introduction And Guidelines without replacement because ASTM is being used and specified by client. Hence, there is no sale of this MS MS ISO :2007 Natural Gas - Calculation Of Compression Factor - Part 2: Calculation Using Molar-Composition

6 7. MS ISO :2007 (CONFIRMED 2012) using molarcomposition analysis (ISO :2006, IDT) Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO :2006, IDT) 8. MS ISO 13443: 2003 Natural gas - Standard reference conditions (ISO 13443:1996, IDT) 9. MS ISO 14111: 2002 (CONFIRMED:2007) Natural gas - Guidelines to traceability in analysis (ISO 14111:1997, IDT) 10. MS ISO 18453:2008 Natural gas - Correlation between water content and water dew point (ISO 18453:2004, IDT) 11. MS ISO 19739:2008 Natural gas - Determination of sulphur compounds using gas chromatography (First revision) (ISO 19739:2004, IDT) 12. MS ISO :2006 Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 1: Onland pipelines (ISO :2004, IDT) 13. MS ISO :2006 Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO :2004, IDT) 14. MS 1835:2005 Standard test method for density and relative density of liquids by digital density meter Analysis without replacement because MS ISO :2007 (CONFIRMED 2012) Natural Gas - Calculation Of Compression Factor - Part 3: Calculation Using Physical Properties without replacement because ASTM is being used and specified by client. Hence, there is no sale of this MS MS ISO 13443: 2003 (CONFIRMED 2008) Natural Gas - Standard Reference Conditions without replacement because MS ISO 14111: 2002 (CONFIRMED:2007) Natural Gas - Guidelines To Traceability In Analysis without replacement because MS ISO 18453:2008 Natural Gas - Correlation Between Water Content And Water Dew Point without replacement because ASTM is being used and specified by client. Hence, there is no sale of this MS MS ISO 19739:2008 Natural Gas - Determination Of Sulphur Compound Using Gas Chromatography (FIRST REVISION) without replacement because H 19/11/2013 TC on Pipeline Transportation proposed to withdraw MS ISO :2006 Petroleum And Natural Gas Industries - Cathodic Protection Of Pipeline Transportation Systems - Part 1: On-Land Pipelines without replacement because other standards, such as: NACE, etc. are being used and there is no sale of this MS ISO since publication. Hence, TC on Pipeline Transportation proposed to direct use. H 19/11/2013 TC on Pipeline Transportation proposed to withdraw MS ISO :2006 Petroleum And Natural Gas Industries - Cathodic Protection Of Pipeline Transportation Systems - Part 2: Offshore Pipelines without replacement because other standards, such as: NACE, etc. are being used and there is no sale of this MS ISO since publication. Hence, TC on Pipeline Transportation proposed to direct use. H 19/11/2013 TC on Petroleum Lubricants proposed to withdraw MS 1835:2005 Standard test method for density and relative density of liquids by digital density meter without replacement because this standard is not cross-referred in any other standard and

7 15. MS 2005:2006 Test Method For Apparent Viscosity Of Engine Oils Between -5 And -35 Degree Celsius Using The Cold- Cranking Simulator there is no sale of this MS since publication. H 19/11/2013 TC on Petroleum Lubricants proposed to withdraw MS 2005:2006 Test Method For Apparent Viscosity Of Engine Oils Between -5 And -35 Degree Celsius Using The Cold-Cranking Simulator without replacement because this standard is not cross-referred in any other standard and there is no sale of this MS since publication.