PROCESS ECONOMICS PROGRAM
|
|
|
- Randell Allison
- 6 years ago
- Views:
Transcription
1 PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Menlo Park, California Abstract Process Economics Program Report No. t75a BLENDS CONTAINING POLYOLEFINS (June 1990) This report expands the scope of PEP Report 175, which emphasized blends containing polycarbonates and ABS resins, to include blends of polyolefins with other thermoplastics. Blends of polyethylene (LDPE, LLDPE, and HDPE), polypropylene, and polybutene-1 with ethylene alkyl acrylate copolymers, ionomers, nylon, and polycarbonates are discussed. A review of the pertinent patents and blends that are commercial or near-commercial Is provided, as well as procedures and equipment typically used for producing blends. PEP 87 ADA
2 ReportNo.175A BLENDS CONTAINING POLYOLEFINS SUPPLEMENT A by ALFRED D. ABSHIRE June1990 A private report by the PROCESS ECONOMICS PROGRAM Menlo Park, California 94025
3 For detailed marketing data and information, the reader is referred to one of the SRI programs specializing in marketing research. The CHEMICAL ECONOMlCS HANDBOOK Program covers most major chemicals and chemical products produced in the United States and the WORLD PETROCHEMlCALS Program covers major hydrocarbons and their derivatives on a worldwide basis. In addition, the SRI D/RECTORY OF CHEMICAL PRODUCERS services provide detailed lists of chemical producers by company, product, and plant for the United States and Western Europe ii
4 CONTENTS 1 INTRODUCTION l-l GLOSSARY ~ SUMMARY l INDUSTRY STATUS... 2-l ALKYL ACRYLATE/IONOMER BLENDS NYLON (POLYAMIDES) BLENDS POLYCARBONATE BLENDS OTHER POLYMER BLENDS EVA PEI PET PPE PVC Styrenics Vinylidene Chloride/Vinyl Chloride Copolymer Styrene-Olef in Block Copolymers Others COSTS OF PRODUCING BLENDS INDUSTRY STATUS... 3-l MARKETS FOR BLENDS AND ESTIMATED PRODUCTION... 3-l PRODUCERS OF BLENDS THERMOPLASTIC BLENDS VERSUS TAILORED POLYMERS TYPES OF POLYMER BLENDS... 4-l MISCIBLE BLENDS TWO-PHASE BLENDS COMPATIBILIZERS, SURFACTANTS, AND INTERFACIAL AGENTS REINFORCEMENT OF BLENDS WITH GLASS FIBERS PROPERTIES OF POLYOLEFIN BLENDS Ill -
5 CONTENTS (Continued) 5 TYPICAL PROPERTIES OF POLYOLEFINS USED IN BLENDS... LDPE (POLYETHYLENE TYPE 1)... General Description... LDPE Producers and Processes... Properties... Applications... LLDPE (POLYETHYLENE TYPE 2)... General Description... Producers and Processes... Properties... Applications... HDPE (POLYETHYLENE TYPE 3)... General Description... Producers and Processes... Properties... Applications... PP... General Description... Producers and Processes... Properties... Applications... PB... General Description... Producers and Processes... Properties... Applications... 6 ETHYLENE ALKYL ACRYLATEAONOMER BLENDS... CHARACTERISTICS... Ethylene Alkyl Acrylates... Ethylene Alkyl Acrylates-Properties... Ethylene Alkyl Acrylates--Applications... lonomers... lonomers-properties... lonomers--applications... 5-l 5-l 5-l l l l iv -
6 CONTENTS (Continued) 6 ETHYLENE ALKYL ACRYlATE/lONOMER BLENDS (Concluded) BLENDS WlTH LDPElVLDPE Disposable Gloves and Hospital Pads Tile Insulators Golf Ball Covers BLENDS WITH LLDPE Golf Ball Covers Extrusion Coating or Film Surface Layer Film and Plastic Bags BLENDS WlTH HDPE High Performance Film Molding Resins HDPE and Cross-Linked Alkyl Acrylate Elastomers BLENDS WlTH PP Heat Sealable Films Adhesive Films PP and Cross-Linked Alkyl Acrylate Elastomers BLENDS WITH PB NYLON (POLYAMIDES) BLENDS... CHARACTERlSTlCS... Properties... Applications... BLENDS WITH HDPE... Immiscible Blends... Containers for Solvents... Oxygen Barrier Films and Containers... Improved Extrusion Processing... Impact Resistant Blends Containing Amorphous Polyamides... Miscible Blends... Containers... Barrier Food Packaging... Nylon 6/0 Compounds with Superior Impact Resistance.... Ultra High Molecular Weight Polyethylene... 7-l 7-l 7-l I v-
7 CONTENTS (Contlnued) 7 NYLON (POLYAMIDES) BLENDS (Concluded) BLENDS WlTH PP Immiscible Blends Pearlescent Films... 7-l 3 Paintable and Printable Injection Molding Compounds Miscible Blends Multiimponent Polyamide-Block Copolymer-PP Blends Modified Block Copolymer Compatibilizers... 7-l 6 MA Modified Ethylene Copolymer-Nylon-PP,Blends Glass Reinforced MA Modified PP-Nylon-PP Blends MA Modified PP-Nylon-PP-Epoxy Copolymer Blends POLYCARBONATE BLENDS l CHARACTERISTICS... 6-l PROPERTlES... 6-l APPLlCATlONS BLENDS,WITH LLDPE Immiscible Blends Improved Impact and Environmental Stress Cracking Resistance (ESCR) Impact Resistant LLDPE Containing Glass Fibers Miscible Blends BLENDS WITH HDPE Immiscible Blends High Heat Distortion Blends PC Blends Containing HDPE and Olefinic Elastomer (EPR or EFDM) Phase Morphology of PE/PC Blends With and Without SEBS Miscible Blends BLENDS WlTH PP... 6-l 1 Immiscible Blends... 6-l 1 MlsclbIe Blends... 6-l 1 SEBS Compatibility Blends of PP and PC PP/PC Blends with EVA or EVOH Compatibilizers PP/PC Blends with EVOH and SEBS or SEBS MA vi -
8 CONTENTS (Concluded) 0 BLENDS WiTH OTHER POLYMERS... 9-l EVA... 9-l POLYETHERIMIDE (PEI) POLYESTERS (PET) PPE PVC STYRENICS VINYLIDENE CHLORIDE/VINYL CHLORIDE COPOLYMERS STRYENE-OLEFIN BLOCK COPOLYMERS (SBS, SEBS, SEP) SEBS and SEP SBS OTHER POLYMERS EQUIPMENT, PROCEDURES, AND COSTS FOR PRODUCING BLENDS l COMMERCIAL BLENDING l Preblenders... 1 o-3 Masterbatching... 1 o-4 Criteria for Good Blending... 1 o-4 COMMERCIAL BLENDING FACILITY... 1 o-4 CAPlTAL INVESTMENT... 1 o-4 Conversion Costs... 1 O-6 Materials Costs... 1 o-7 APPENDIX A: PATENT SUMMARY TABLES A-l APPENDIX 8: CITED REFERENCES B-l APPENDIX c: PATENT REFERENCES c-1 - vii -
9 ILLUSTRATIONS 4.1 PRODUCT PERFORMANCE PROFILES TYPICAL PP HOMOPOLYMER PRODUCT PERFORMANCE PROFILE HIGH CLARITY EXTRUSION FILM LDPE PRODUCT PERFORMANCE PROFILE COMPOSITE LLPDE VS. COMPOSITE LDPE PRODUCT PERFORMANCE PROFILE CAST FILM GRADE LLDPE VS. AVERAGE OF LLDPE RESINS,...., PRODUCT PERFORMANCE PROFILE BLOW MOLDING BOTTLE GRADE HDPE VS. HDPE AVERAGE VALUES a STRUCTURE OF ISOTACTIC PP * PRODUCT PERFORMANCE PROFILE HIGH-IMPACT-RESISTANT PP COPOLYMER VS. PP COPOLYMER AVERAGE VALUES PRODUCT PERFORMANCE PROFILE PP COPOLYMER VS. PP HOMOPOLYMERS PRODUCT PERFORMANCE PROFILES PP COPOLYMERS VS. PP HOMOF OLYMERS LINE FOR BLENDING OF POLYOLEFIN THERMOPLASTICS ,... 1 o-5 - ix -
10 TABLES 3.1 PATENT HOLDERS AND COMPOUNDERS OF POLYOLEFINS/" ENGINEERING POLYMERS BLENDS TRADE NAMES AND RESINS BLENDED AVERAGE PROPERTIES OF PP HOMOPOLYMERS AVERAGE PROPERTIES OF LDPE POLYMERS AVERAGE PROPERTIES OF LLDPE POLYMERS AVERAGE PROPERTIES OF HDPE POLYMERS... 5-l AVERAGE VALUES OF PP POLYMERS AVERAGE STANDARD DEVIATION AS PERCENT OF AVERAGE VALUE RANGE OF PB PROPERTIES ETHYLENE ALKYL ACRYLATES--TYPlCAL PROPERTIES IONOMERS-TYPICAL PROPERTIES PROPERTIES OF FILMS MADE FROM BLENDS OF VLDPE AND EMAC CRACK RESISTANT GOLF BALL COVERS CRACK RESISTANT GOLF BALL COVERS POLYETHYLENE/IONOMER BLENDS WITH GOOD EXTRUSION PROCESSABILITY LLDPE/IONOMER FILM COMPOSITIONS FILM PROPERTIES OF LDPE BLENDS WITH IONOMER, EVA, AND SBS HIGH STRENGTH FILMS HDPE AND IONOMER BLENDS REINFORCED HDPE/IONOMER BLENDS CROSS-LINKED THERMOPLASTIC BLENDS OF HDPE WITH E/MAM/MAME ELASTOMERS xi -
11 TABLES (Continued) 6.13 THERMOPLASTIC BLENDS OF HDPE AND A LOW ETHYLENE EIMAIMAME ELASTOMER CROSS-LINKING VS. NONCROSS-LINKING HEAT SEALABLE FILMS...I...,,...,...,...,...,, EFFECT OF PP MANUFACTURER ON FILM PROPERTIES EFFECT OF THERMAL PROCESSING ON PROPERTIES STERILIZABLE PP-IONOMER BLENDS *...* PP-ALKYLMETHACRYLATE GRAFT COPOLYMERS ADHESIVE FORMULATlONS AND PROPERTIES...., TRIAL THERMOFORM SHEET ADHESIVES., , CROSS-LINKED THERMOPLASTIC BLENDS OF PP WITH E/MAM/MAME ELASTOMERS * THERMOPLASTIC BLENDS OF PP AND A LOW ETHYLENE E/MA/MAME ELASTOMER CROSS-LINKING VS. NONCROSS-LINKING., , LAMINATED FILMS--COMPOSITION AND PEEL STRENGTH NYLON RESINS-TYPICAL PROPERTIES MOLDING AND EXTRUSION COMPOUNDS PERMEABILITY LOSS * PROPERTlES OF CONTAINER WALLS HDPE-NYLON LAMINAR SYSTEMS PROPERTIES OF COPOLYAMIDE AND HDPE BLENDS COMPOSITION AND PROPERTIES OF HDPE-NYLON 616 BARRIER BLENDS * COMPOSITION AND PROPERTIES OF LLDPE-NYLON 616 BARRIER BLENDS * COMPOSlTlON AND PROPERTIES OF LDPE, LLDPE, EVA, AND BARRIER BLENDS WlTH NYLON HIGH IMPACT NYLON 6/6 BLENDS * xii -
12 TABLES (Continued) 7.9 PROPERTIES OF PP MODIFIED NYLON 6 BLENDS PROPERTIES OF PP-NYLON-SEBS-GLASS FIBER BLENDS PROPERTIES OF PP NYLON 618 BLENDS WITH SEBS AND FUNCTIONALIZED SEBS PROPERTIES OF PP MA 0.16-NYLON 6/6-SEBS BLENDS AND PERCENT CHANGE FROM PP 5520 BLENDS COMPOSITION AND PROPERTIES OF REINFORCED NYLON-PP-EP MA 1.O BLENDS, COMPOSITIONS AND PROPERTIES OF NYLON-PP-PP MA 3 BLENDS SELECTED PROPERTIES OF MCX-Q BLENDS, NYLON 6 AND NYLON COMPOSITION AND PROPERTIES OF MA MODIFIED PP-NYLON-PP-EPOXY COPOLYMER BLENDS * PROPERTIES OF MA MODIFIED PP-NYLON-PP-EPOXY COPOLYMER BLENDS *...*** PROPERTIES OF ADDITIONAL MA MODIFIED PP-NYLON-PP-EPOXY COPOLYMER BLENDS *...* PROPERTIES OF FILLED MA MODIFIED PP-NYLON-PP-EPOXY COPOLYMER BLENDS......*...* POLYCARBONATE RESINS TYPlCAL PROPERTIES OF MOLDING AND EXTRUSION COMPOUNDS POLYCARBONATE MODIFIED BY LLDPE AND PP COMPOSITION AND IMPACT PROPERTIES POLYCARBONATE MODIFIED BY LLDPE AND HDPE COMPOSITION AND IMPACT STRENGTH FIBERGLASS REINFORCED LLDPE-PC BLENDS COMPOSITION AND IMPACT PROPERTIES COMPOSITION AND WEAR RESISTANCE OF PC BLENDS WITH LLDPE AND PTFE XIII -
13 TABLES (Concluded) COMPOSlTlON OF HDPE/PC BLENDS AND HEAT DISTORTION PROPERTIES * COMPOSITION AND PROPERTIES OF PC BLENDS WlTH HDPE AND EPRIEPDM......* PROPERTIES OF PANLlTE* PC AND PC-POLYOLEFIN BLENDS A;1 A.2 A.3 A.4 A.5 EFFECT OF PC CHAINSTOPPER ON HDPE BLENDS COMPOSITlON AND PROPERTlES OF PP-PC FILMS , COMPOSlTlON AND PROPERTlES OF PC-PP BLENDS WITH EVA AND EVOH COMPATIBIUZERS.., ,.., COMPOSlTlON AND PROPEdTlES OF PP-PC-EVOH BLENDS WITH SEBS OR SEBS MA a TYPlCAL COSTS OF COMMERCIAL SCALE THERMOPLASTICS BLENDING TOTAL CAPlTAL INVESTMENT TYPlCAL COSTS OF COMMERClAL SC&E THERMOPLASTICS BLENDING CONVERSION COSTS *... 1 o-9 BLENDS OF ALKYL ACRYLATES AND IONOMERS WITH POLYOLEFINS PATENT SUMMARY *... A-3 BLENDS OF NYLON (POLYAMIDES) AND POLYOLEFINS PATENT SUMMARY *...*... A-6 BLENDS OF POLYCARBONATES AND POLYOLEFINS PATENT SUMMARY A-6 MISCELLANEOUS BLENDS OF POLYMERS WITH POLYOLEFINS PATENT SUMMARY ,....., ,,..... A-10 EQUIPMENT, PROCEDURES, AND COSTS FOR PRODUCING BLENDS PATENT SUMMARY......I... A-16 - xiv -
ACRYLONITRILE THERMOPLASTICS
Report No. 78 ACRYLONITRILE THERMOPLASTICS by ROBERT H. SCHWAAB August 1972 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION,........................
LINEAR POLYETHYLENE AND POLYPROPYLENE
Report No. 19-A LINEAR POLYETHYLENE AND POLYPROPYLENE Supplement A by ROBERT Consultant L. MAGOVERN October 1969 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK,
PROCESS ECONOMICS PROGRAM
PROCESS ECONOMICS PROGRAM Abstract Process Economics Program Report No. 29C SRI INTERNATIONAL Menlo Park, California 94025 ETHYLENE PLANT CONVERSION (July 1985) This report deals with the technology and
PROCESS ECONOMICS PROGRAM
PROCESS ECONOMICS PROGRAM Abstract Process Economics Program Report No. 158 SRI INTERNATIONAL Menlo Park, California 94025 OCTANE IMPROVERS FOR GASOLINE (November 1983) There la currently worldwide interest
POLYAMIDES OTHER THAN NYLONS 6 AND 66
Report No. 94 POLYAMIDES OTHER THAN NYLONS 6 AND 66 PART I by YEN-CHEN YEN November 1974 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS,
ETHYLENE-PROPYLENE PROCESS ECONOMICS PROGRAM. Report No. 29A. Supplement A. by SHIGEYOSHI TAKAOKA With contributions by KIICHIRO OHYA.
Report No. 29A ETHYLENE-PROPYLENE Supplement A by SHIGEYOSHI TAKAOKA With contributions by KIICHIRO OHYA March 1971 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO
Egyptian Petrochemicals Industry. A Prospect for the Future LOGO
Egyptian Petrochemicals Industry A Prospect for the Future LOGO Contents Egyptian Petrochemical Industry 2002-2015 Constrains & Challenges Future Vision Introduction Petrochemical industry plays a vital
Delivery program Semi-finished plastics
Delivery program Semi-finished plastics Centroplast Engineering Plastics GmbH Engineering plastics belong to most important industrial materials. They convince above all by their level of performance and
ACRYLICACID AND ACRYLIC ESTERS
Report No. 6A ACRYLICACID AND ACRYLIC ESTERS Supplement A by RICHARD G. DENNEY April 1967 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS
PROCESS ECONOMICS PROGRAM
7 Report No. 34 PHTHALIC ANHYDRIDE by LLOYD M. ELKIN contributions by Kenneth E. Lunde March 1968 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA CONTENTS
ALIPHATIC SURFACTANTS
Report No. 59 ALIPHATIC SURFACTANTS by MIKIO KUMAGAI and SHIGEYOSHI TAKAOKA December 1969 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA CONTENTS
PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Menlo Park, California
PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Menlo Park, California Abstract Process Economics Program Report No. 169 REFINERY/CHEMICALS INTERFACE (January 1985) Demand for most major refinery products
PEP Review CONTINUOUS SAP PRODUCTION VIA DOUBLE KNEADER REACTOR By Anthony Pavone (November 2011)
PEP Review 2011-12 CONTINUOUS SAP PRODUCTION VIA DOUBLE KNEADER REACTOR By Anthony Pavone (November 2011) ABSTRACT Superabsorbent polymer (SAP) is a partially neutralized homo-polymer of glacial acrylic
Abstract Process Economics Program Report No. 158A OCTANE IMPROVERS FOR GASOLINE (February 1992)
Abstract Process Economics Program Report No. 158A OCTANE IMPROVERS FOR GASOLINE (February 1992) Lead phaseout in the United States has brought about a strong interest in oxygenated octane improvers for
Abstract PEP Review PROCESS ECONOMICS OF COAL-BASED OLEFINS PRODUCTION IN CHINA By R. J. Chang and Jamie Lacson (May 2012)
Abstract PEP Review 2012-04 PROCESS ECONOMICS OF COAL-BASED OLEFINS PRODUCTION IN CHINA By R. J. Chang and Jamie Lacson (May 2012) ABSTRACT China has started or planned several large commercial projects
Petrochemicals Global Trends & Opportunities for Investment in India. A N JHA, Executive Director ( Petrochemical- Project )
Petrochemicals Global Trends & Opportunities for Investment in India A N JHA, Executive Director ( Petrochemical- Project ) Date: 5 th Oct 2018 Structure of Presentation Petrochemicals Business- Environment
Economic Benefits of Utilizing MDO Films in Flexible Packaging
Economic Benefits of Utilizing MDO Films in Flexible Packaging D. Ryan Breese Technical Director Eclipse Film Technologies 4434 Muhlhauser Rd. Suite 200 Hamilton, Ohio 45011 1-877-275-4800 rbreese@eclipsefilmtech.com
PROCESS ECONOMICS PROGRAM
PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Mod0 Park, California 94025 Abstract Process Economics Program Report No. 1C ISOCYANATES/POLYISOCYANATES In this supplementary report, several processes for
Economic Benefits of Utilizing MDO Films in Flexible Packaging
Economic Benefits of Utilizing MDO Films in Flexible Packaging D. Ryan Breese Technical Director Eclipse Film Technologies 4434 Muhlhauser Rd. Suite 200 Hamilton, Ohio 45011 1-877-275-4800 rbreese@eclipsefilmtech.com
CONTENTS 1 INTRODUCTION SUMMARY 2-1 TECHNICAL ASPECTS 2-1 ECONOMIC ASPECTS 2-2
CONTENTS GLOSSARY xxiii 1 INTRODUCTION 1-1 2 SUMMARY 2-1 TECHNICAL ASPECTS 2-1 ECONOMIC ASPECTS 2-2 3 INDUSTRY STATUS 3-1 TRENDS IN TRANSPORTATION FUEL DEMAND 3-3 TRENDS IN ENVIRONMENTAL REGULATION 3-3
PROCESS ECONOMICS PROGRAM
PROCESS ECONOMICS PROGRAM Abstract SRI INTERNATIONAL Mado Park, California 94025 Process Economics Program Report No. 170 SWEETENERS (September 1984) Low calorie and nonnutritive sweeteners, once used
ISOMERIZATION OF PARAFFINS FOR GASOLINE
Report No. 91 ISOMERIZATION OF PARAFFINS FOR GASOLINE by EARL D. OLIVER and RYOSUKE HASHIMOTO OCTOBER 1974 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA
Report No. 35 BUTADIENE. March A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I PARK, CALIFORNIA
Report No. 35 BUTADIENE by GEORGE E. HADDELAND March 1968 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION.......................
DIOXIDE REMOVAL FROM STACK GASES
Report No. 63 SULFUR DIOXIDE REMOVAL FROM STACK GASES by EARL D. OLIVER July 1970 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION.......,.................
AROMATIC AMINES PROCESS ECONOMICS PROGRAM. Report No. 76Al Interim. by YEN-CHEN. July A private report by the MENLO PARK, CALIFORNIA
Report No. 76Al Interim AROMATIC AMINES by YEN-CHEN YEN July 1975 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION........................
Promix Solutions trust the leader. Static Mixers Solutions for Injection Molding
Promix Solutions trust the leader Static Mixers Solutions for Injection Molding Your partner in the plastics processing industry Founded in 2012 as a spin-off of Sulzer Chemtech Subsidiaries in Winterthur,
PEP Review ON-PURPOSE BUTADIENE PRODUCTION By Richard Nielsen with a Contribution by Russell Heinen (June 2011)
PEP Review 2011-05 ON-PURPOSE BUTADIENE PRODUCTION By Richard Nielsen with a Contribution by Russell Heinen (June 2011) ABSTRACT 1,3-Butadiene is currently almost entirely produced as a by-product of ethylene
XYLENES SEPARATION SUPPLEMENT
Report No. 25A XYLENES SEPARATION SUPPLEMENT A by HAROLD C. RIES July 1970 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA CONTENTS INTRODUCTION,..,....................
HYDROFLUORIC ACID FLUOROCARBONS AND PROCESS ECONOMICS PROGRAM. Report No. 89. November A private report by the MENLO PARK, CALIFORNIA
Report No. 89 HYDROFLUORIC ACID FLUOROCARBONS AND by HAROLD W. SCHEELINE November 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA -. _ CONTENTS
Abstract Process Economics Program Report 222 PETROLEUM INDUSTRY OUTLOOK (July 1999)
Abstract Process Economics Program Report 222 PETROLEUM INDUSTRY OUTLOOK (July 1999) Global energy demand is rising, with fossil fuels oil, natural gas, and coal continuing to provide more than 90% of
Wim Van de Velde, Director of Marketing, Plastic Additives business
Examining The Competiveness Of North American Polypropylene And The Role Of Increased Propylene Supply To Allow For Improved Economics And Greater Derivative Market Penetration, an additives approach Wim
Heat Seal Characteristics of Cyclic Olefin Copolymer / Polyethylene Blends. Topas Advanced Polymers A member of Daicel/Polyplastics Group
Heat Seal Characteristics of Cyclic Olefin Copolymer / Polyethylene Blends 1 Introduction Cyclic Olefin Copolymers (COC) use is growing in flexible packaging films Attributes include easy processing, stiffness,
Abstract Process Economics Program Report 21F NEW GENERATION OXO ALCOHOLS (October 2012)
Abstract Process Economics Program Report 21F NEW GENERATION OXO ALCOHOLS (October 2012) This report follows a series of Process Economics Program reports on the topic of oxo alcohols. The last report
High Temperature Thermoplastic Nylons 01/02S3
High Temperature Thermoplastic Nylons 01/02S3 May 2002 Nexant, Inc./Chem Systems 44 South Broadway White Plains, New York 10601-4425 Telephone (914) 609-0300 Facsimile (914) 609-0399 www.chemsystems.com
Abstract Process Economics Program Report No. 203 ALKANE DEHYDROGENATION AND AROMATIZATION (September 1992)
Abstract Process Economics Program Report No. 203 ALKANE DEHYDROGENATION AND AROMATIZATION (September 1992) Propylene, isobutene, and BTX (benzene, toluene, and xylenes) have traditionally been recovered
Abstract Process Economics Program Report 251 BIODIESEL PRODUCTION (November 2004)
Abstract Process Economics Program Report 251 BIODIESEL PRODUCTION (November 2004) Biodiesel is an ester of fatty acids produced from renewable resources such as virgin vegetable oil, animal fats and used
PROTEINS FROM HYDROCARBONS
Report No. 60 PROTEINS FROM HYDROCARBONS by WING SIEN FONG February 19 70 A private report by the - PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION...,...............
Compostable Solutions for Packaging. FlexPackCon 2016 Randy Jester
Compostable Solutions for Packaging FlexPackCon 2016 Randy Jester 10/14/2016 1 Overview Film structural polymers ecovio aliphatic-aromatic polyester / PLA blend ecoflex aliphatic-aromatic polyester Packaging
OX0 ALCOHOLS PROCESS ECONOMICS PROGRAM. Report No. 21. contributions by Shigeyoshi Takaoka. November A private report by the
Report No. 21 OX0 ALCOHOLS by RICHARD G. DENNEY contributions by Shigeyoshi Takaoka November 1966 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA
EXPERTISE IN PLASTICS JERRYCANS
EXPERTISE IN PLASTICS JERRYCANS Contents Jerrycans Volume litres Neck Material Colour * Page opti-rib 2 / 2,5 / 3 DIN 45 HDPE natural colour 5 opti-rib 5 DIN 45 HDPE natural colour 6 opti-rib 5 DIN 50
Abstract Process Economics Program Report 195A ADVANCES IN FLUID CATALYTIC CRACKING (November 2005)
Abstract Process Economics Program Report 195A ADVANCES IN FLUID CATALYTIC CRACKING (November 2005) Recent emphasis in fluid catalytic cracking is on maximum light olefins production, gasoline sulfur reduction
Waxes for pigment dispersion in polar and non polar plastics
Waxes for pigment dispersion in polar and non polar plastics 1st International Conference on Masterbatch & Compound 15th/16th of February 2016 - Tehran 1 Classification of PE-waxes and effects in colour
Comparison Between PE 4710 (PE 4710 PLUS) and PE 100 (PE 100+, PE 100 RC)
Comparison Between PE 4710 (PE 4710 PLUS) and PE 100 (PE 100+, PE 100 RC) Author: Dr. Gene Palermo, President, Palermo Plastics Pipe Consulting, www.plasticspipe.com Abstract The scope of this paper is
TREATMENTOF PETROCHEMICAL WASTEWATERS
Report No. 80 TREATMENTOF PETROCHEMICAL WASTEWATERS by EARL D. OLIVER September 1972 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA CONTENTS 1
CHEMCUT PARTS IDENTIFICATION GUIDE
CHEMCUT PARTS IDENTIFICATION GUIDE 1. Identify System Serial Number 2. Parts Identifer 3. Chemcut Nomenclature 4. Chemcut Gears 5. Componets And Materials Chemcut Corp. 500-1 Science Park Road. State College,
Abstract Process Economics Program Report 43D MEGA METHANOL PLANTS (December 2003)
Abstract Process Economics Program Report 43D MEGA METHANOL PLANTS (December 2003) World scale, grass roots methanol plants currently have production capacities as high as 3,000 metric tons per day. A
The Right Seal for Every Application
The Right Seal for Every Application O-Rings The O-ring s simple & inexpensive design remains a popular and universal choice for sealing static and dynamic hydraulic systems. It seals efficiently in both
FIGURE 5 CFRP FABRICATION COSTS USING DIFFERENT FABRICATION METHODS ($/LB)... 9 Durability/Reliability Recyclability Conservatism...
INTRODUCTION... xxv BACKGROUND... xxv STUDY GOALS AND OBJECTIVES... xxv INTENDED AUDIENCE... xxvi SCOPE OF REPORT... xxvi INFORMATON SOURCES AND METHODOLOGY... xxvii ANALYST CREDENTIALS... xxviii RELATED
Paint Resin in Thermoplastics Properties and Applications
Paint Resin in Thermoplastics Properties and Applications Jennifer Lynch EPA Seminar Technology Review and Demonstration of Paint Resin Reclamation Technology for Use in Thermoplastics June 12, 2008 Overview
Coextrusion system for the production of 3 layer blown film FLEXIBILE MODULAR EFFICIENT
Coextrusion system for the production of 3 layer blown film FLEXIBILE MODULAR EFFICIENT Film coextrusion is becoming more and more widespread in the packaging industry and is quickly replacing monolayer
Process Economics Program
IHS Chemical Process Economics Program Review 2013-03 Cerenol DuPont Polyether Glycol Made from 1,3-Propanediol (PDO) By Anthony Pavone IHS Chemical agrees to assign professionally qualified personnel
PEP Review METHYL TERTIARY BUTYL ETHER PRODUCTION FROM STEAM CRACKER C 4 STREAM By Syed N. Naqvi (December 2012)
PEP Review 2012-07 METHYL TERTIARY BUTYL ETHER PRODUCTION FROM STEAM CRACKER C 4 STREAM By Syed N. Naqvi (December 2012) ABSTRACT This Review presents a technoeconomic evaluation of a methyl tertiary butyl
Impact of a changing global landscape
Impact of a changing global landscape David Lines - Principal Agenda Global Polyolefin Business: Challenges and Prospects Petrochemical & Polymer Market Overview Investment Landscape Growth Opportunities
PLUG ASSIST MATERIALS FOR IMPROVED FORMING OF TRANSPARENT POLYPROPYLENE
PLUG ASSIST MATERIALS FOR IMPROVED FORMING OF TRANSPARENT POLYPROPYLENE By Kathleen Boivin and Noel Tessier CMT s Inc., Attleboro, MA Introduction A new class of syntactic foam with a copolymer base, available
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KMD-700MAH KMD-700MWH KMD-700MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71221 Issued: 5-29-2003 Revised: 1-9-2008 CONTENTS
Recycling with ECO-FLEX RTPV Thermoplastic Elastomer
ECO-FLEX RTPV General Purpose Presentation Recycling with ECO-FLEX RTPV Thermoplastic Elastomer An Opportunity to Cut Costs! Market Definition Elastic Polymers (Rubber) Thermoset Rubbers (TS) Thermoplastic
Technology for Safe and Lightweight Automobiles
AUTOMOTIVE Plastics Application Technology for Safe and Lightweight Automobiles Sudhakar R. Marur Table of Contents Preface...xv Chapter 1 Introduction to Plastics Application Technology... 1 1.1 Introduction...1
Infinity i-star 13 Flow: 13 m3/h - 6 m.w.c. A Infinity i-star 17 Flow: 17 m3/h - 6 m.w.c. A
PUMPS & BLOWERS 2011 PUMPS & BLOWERS PUMPS Series I - STAR Self priming centrifugal pumps for swimming pool with prefilter Quiet operation Prefilter with specially constructed clear lid with ring lock
Selected Aspects of the Processing Stability of Polyolefins
1 Selected Aspects of the Processing Stability of Polyolefins Part 1 Polypropylene H. Kwon 1, J.Kim 1, J.Bayer 2, J. Mara 3, B.Iyer 4 & Klaus Keck 1 1 Songwon Industrial, South Korea 2 Songwon International
Film Capacitors For High Temperature Switches And Power Electronics Applications Above 125 C
2015 Applied Power Electronics Conference 1 Film Capacitors For High Temperature Switches And Power Electronics Applications Above 125 C Joe Bond Operations And Engineering Manager March 2015 Presentation
SMC/Fiberglass Repair Adhesive - 90
SMC/Fiberglass Repair Adhesive - 90 Technical Data Sheet June, 2014 3M Part No.(s) 3M Part Descriptor(s) 3M SMC/Fiberglass Repair Adhesive - 90 Product Description 3M SMC/Fiberglass Repair Adhesive - 90,
HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST
NO: 71012 ISSUED: SEPT. 6, 1989 REVISED: FEB. 25, 2002 HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST J-1 JULY 1989 J-2 OCTOBER 1989 K-1 DECEMBER 1989 K-2 SEPTEMBER 1990 A-0 MARCH 1991 A-1
Polyethylene Terephthalate
Polyethylene Terephthalate (PET) Table of Contents A Report by Nexant s CHEMSYSTEMS Process Evaluation/Research Planning (PERP) Program PERP 2012-6 Published April 2013 Section Page 1 Executive Summary...
Film Capacitors For High Temperature Switches And Power Electronics Applications Above 125 C
1 Film Capacitors For High Temperature Switches And Power Electronics Applications Above 125 C 2015 Applied Power Electronics Conference Joe Bond Operations And Engineering Manager Electronic Concepts
Bristol Tape Corporation An ISO 9001:2000 Certified Company. 3M Converter Markets
3M Converter Markets Specialty Tapes Low Outgassing Electrically Conductive Thermally Conductive Thermal Pads Thermo-Bond Films Repulpable Plate Mounting Page 1 of 8 SPECIALTY TAPES Low Outgassing Tapes:
Improved Adhesion EVA for Extrusion Coating / Extrusion Laminating. Presented by: Scott Weber AD&TS Engineer Celanese
Improved Adhesion EVA for Extrusion Coating / Extrusion Laminating Presented by: Scott Weber AD&TS Engineer Celanese Overview Objective Market / Applications Experimental Procedures Results Conclusions
Investment Planning of an Integrated Petrochemicals Complex & Refinery A Best Practice Approach
Investment Planning of an Integrated Petrochemicals Complex & Refinery A Best Practice Approach RPTC, Moscow, 19 September 2012 David Gibbons Principal Process Consultant Foster Wheeler. All rights reserved.
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH PARTS LIST
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH S LIST ITEM #: 71221 ISSUED: MAY 29, 2003 REVISED: JUNE 30, 2003 KMD-700MAH MAY, 2003 KMD-700MWH MAY, 2003 KMD-700MRH
Fundamentals of Petrochemical Industry
Fundamentals of Petrochemical Industry Akil Sahiwala Marketing Manager Dow Polyurethanes The Dow Chemical Company AGENDA Petrochemical Value Chain Overview Feedstocks to the Industry Chemical Value Chains
Technical Data Europe. Focused. I nnovative. R esponsive.
Carbon Black Pigments Technical Data Europe Focused. I nnovative. R esponsive. Analytical Test Methods Test Method ISO DIN ASTM Method for Determining the Surface Area International Organization for Standardization
SYNTHETIC BASE STOCKS
Polybutenes Acetylene Black Performance mance Chemical Additiv Additives Polyalphaolefins Alkylate Fluids Refrigeration Fluids Dielectric Fluids Cable Flood, Fill & Gels SYNTHETIC BASE STOCKS Corrosion
Petrochemicals: Opportunities and Challenges
Petrochemicals: Opportunities and Challenges Sandeep Poundrik Joint Secretary (Refineries) Ministry of Petroleum & Natural Gas 5 th October, 2018 1 Petrochemical Growth World scenario mmboe: million barrels
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Model KM-600MAH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71288 Issued: 10-1-2008 Revised: 5-24-2010 CONTENTS Auxiliary Codes...
Process Economics Program
IHS Chemical Process Economics Program Report 290 Bio-Butadiene By Dipti Dave and Susan Bell December 2014 ihs.com/chemical IHS Chemical agrees to assign professionally qualified personnel to the preparation
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH PARTS LIST
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH S LIST ITEM #: 71222 ISSUED: JUNE 2, 2003 REVISED: OCT. 21, 2003 KMD-900MAH N-0 MAY, 2003 N-1 SEPT., 2003 KMD-900MWH
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KM-320MAH KM-320MWH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71250 Issued: 2-13-2006 Revised: 2-20-2006 CONTENTS Auxiliary
ATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU
ATEVA MEDICAL EVA POLYMERS UNIQUE SOLUTIONS FOR YOU WHAT IS ATEVA MEDICAL? Ateva Medical EVA-based resins deliver the reliable performance required for medical applications. Celanese can help companies
Biodegradable Polymer
Biodegradable Polymer 06 EnPol is 07 General Properties Bio degradable plastics can be categorized by their main production methods: ones being produced by living organisms which include linear polyesters
Process Economics Program
IHS Chemical Process Economics Program Report 291 Aromatics from Light Hydrocarbons By Syed Naqvi November 2014 ihs.com/chemical IHS Chemical agrees to assign professionally qualified personnel to the
B-250PD B-300PD B-500PD B-700PD B-800PD B-900PD
ITEM : 71100 ISSUED: APRIL 19, 1993 REVISED: APRIL 26, 2001 HOSHIZAKI STORAGE BIN MODEL B-250PD B-300PD B-500PD B-700PD B-800PD B-900PD PARTS LIST B-250PD G-0 May, 1997 H-0 Dec., 1997 J-0 March, 1999 K-0
Raw Materials for Pressure-Sensitive Adhesives
Raw Materials for Pressure-Sensitive Adhesives Table of Contents 03 Best adhesion properties for all applications 04 05 Labels 06 Primers for Plastic Films 07 Graphic Films 08 09 Specialty Tapes 10 11
Investigation of High Temperature Stability of Tackifiers
Investigation of High Temperature Stability of Tackifiers Erik Willett, Daniel Vargo Functional Products Inc. 2 Outline Polymer Introduction Tackifier Basics Base Oil Impurity Study Tack Preservative Study
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KM-650MAH KM-650MWH KM-650MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71264 Issued: 11-28-2006 CONTENTS Auxiliary Codes...
KM-1300MAH KM-1300MWH KM-1300MRH
71187 ISSUED: JUNE 24, 2001 REVISED: JULY 29, 2003 TM HOSHIZAKI MODULAR CRESCENT CUBER KM-1300MAH KM-1300MWH KM-1300MRH S LIST KM-1300MAH April 2001 KM-1300MWH June 2001 KM-1300MRH April 2001 2 MATERIAL
We create chemistry that makes compost love plastic. Thomas Pitzi Sales Manager North America BASF Biopolymers June 23, 2016
We create chemistry that makes compost love plastic. Thomas Pitzi Sales Manager North America BASF Biopolymers June 23, 2016 Strong Commitment to Biopolymers We believe in this market and invest long term!
Hoshizaki America, Inc.
Hoshizaki America, Inc. Commercial Refrigerators & Freezers Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71257 Issued: 9-8-2006 CONTENTS Auxiliary Codes... Note About Ordering
Process Economics Program
IHS Chemical Process Economics Program Review 2013-10 Adipic Acid from Free Fatty Acids via Verdezyne Fermentation By Anthony Pavone IHS Chemical agrees to assign professionally qualified personnel to
BODY REPAIR SECTION BRM CONTENTS BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY BRM-1 FEATURES OF NEW MODEL... 2 PRECAUTION... 3 ON-VEHICLE REPAIR...
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY SECTION BRM A BODY REPAIR B C D CONTENTS E FEATURES OF NEW MODEL... 2 BODY EXTERIOR PAINT COLOR... 2 Body Exterior Paint Color...2 PRECAUTION... 3 HANDLING
OUTSTANDING PRODUCTS To Support a Wide Range of Applications. MORE THAN DISTRIBUTION Connecting You to the Best Caps and Closures Packaging Solutions
MORE THAN DISTRIBUTION Connecting You to the Best Caps and Closures Packaging Solutions OUTSTANDING PRODUCTS To Support a Wide Range of Applications Nexeo Solutions connects customers to the world s top
The Impressor. The Impressor. Hand-Held Portable Hardness Tester
The Hand-Held Portable Hardness Tester Aluminum Aluminum Alloys Soft Metals Plastics Fiberglass Introduction Portable Easy to Use The is a convenient tool for testing the hardness of aluminum, aluminum
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KM-1340MAH KM-1340MWH KM-1340MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71251 Issued: 5-1-2006 CONTENTS Auxiliary Codes...
Thermx PCT. High-performance Polyester. Product and Properties Guide
Thermx PCT High-performance Polyester Product and Properties Guide Thermx Chemical resistance Processability Dimensional stability Heat resistance Fast molding cycles Thermx PCT polyester is a hightemperature
Fossil-fuel resources becoming more costly: economically, environmentally & geopolitically.
Fossil-fuel resources becoming more costly: economically, environmentally & geopolitically. A need exists for sustainable, low-cost, bio-based feedstock in the renewable plastics industry. Diversion of
CHAPTER 1 INTRODUCTION. 1.1 Automotive Bumper and Energy Absorber
CHAPTER 1 INTRODUCTION 1.1 Automotive Bumper and Energy Absorber The front and rear of the vehicle should be protected in such a manner that low speed collisions will only damage the vehicle slightly,
DSM Elastomers Presentation at the VKRT
THE Global Innovative EPDM Supplier Innovation @ DSM Elastomers Presentation at the VKRT Maurits F.H. van Tol DSM Elastomers Vice-President, Global Research and Development February 12th, 2009 Outline
Chemical Recycling of End-of-Life Plastic. Global Waste to Energy and Resources Summit May 2018
Chemical Recycling of End-of-Life Plastic Global Waste to Energy and Resources Summit May 2018 Introduction Introduce ReNew ELP (End-Of-Life Plastic) A business that has invested in the patented Catalytic
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KM-501MAH KM-501MWH KM-501MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71254 Issued: 5-26-2006 CONTENTS Auxiliary Codes...
Hoshizaki America, Inc.
Hoshizaki America, Inc. Self-Contained Crescent Cuber Models A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71260 Issued: 12-11-2006 CONTENTS Auxiliary Codes... 3 Note About Ordering
ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430
Hoshizaki America, Inc.
Hoshizaki America, Inc. Modular Flaker Models FD-1001MAH(-C) FD-1001MRH-C A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71302 Issued: 4-14-2010 CONTENTS Auxiliary Codes... 3 Note